J.W. Williams, Inc. (an AECOM company) has been manufacturing and marketing heaters to both the oil and gas and gas transmission industries for over 50 years. While the basic design has remained essentially the same, several improvements have been made on heater performance, increasing efficiency, reducing burner noise, and improving control. One of our latest changes includes a vertical configuration to meet the demand for smaller City Gate Utility facilities with close and confined space requirements. Each heater is designed to provide the maximum flexibility of process coil selection for definite temperature requirements as well as reducing the footprint for tight locations.

FacilitiesJ.W. Williams, Inc. operates two fabrication facilities strategically located in some of the most active plays in North America. Our facilities are setup for heavy weld fabrication including columns and pressure vessels. J.W. Williams, Inc. offers environmentally responsible paint application at both locations.

Casper, Wyoming Expanded in 2007, our Casper facility offers 131,000 ft² of manufacturing space including 4,800 ft² of space dedicated to hydrostatic testing. This location is equipped with 30 overhead cranes with up to 24 ton capacity. We are able to accommodate SAW, SMAW, GMAW, GTAW, FCAW and Robotic GMAW welding processes and hold ASME certifications NB, U, UM and R, with applicable sections of II, V, VIII and XI.

– Hydro test pumps to 15,000 PSI – Custom engineered robot welding

machine – Shadow 2 plasma cutter

Waller, Texas Located 25 miles northwest of Houston, our Waller facility consists of a 23 acre yard, 64,500 ft² fabrication shop and 9,000 ft² of warehouse space. The fabrication facility is equipped with six overhead cranes with lifting capacity up to 20 tons. At this location We are able to accommodate SAW, SMAW, GMAW, GTAW and FCAW welding processes and hold ASME certifications NB, U2 and R, with applicable sections of II, V, VIII and XI.

– Welding manipulators – Hydro test pumps to 33,000 PSI – Rough terrain mobile crane

Process service capabilities

– Engineered for; Safety, operability, space requirements, and customer specifications

– Designed for all climates – 85 MBTU to 7.5 MMBTU – U-shaped gas fired or electric element

heating

– Operating pressures up to 10,000 psi

– Standard or custom control packages

– Burner management – Meets DOT Pipeline requirements – Manufactured in Texas and/or

Wyoming – Experienced service technicians

available to provide Start-up assistance, Troubleshooting & Maintenance, and Operator training.

– Skid mounted – Removable coils and fire tubes

Kevin JeansonneVP Business Development19219 Katy FreewayHouston, TX 77094kevin.jeansonne@aecom.comO – 281.647.4228C – 281.222.7546 Jeff SchubertManager – US Business Development– West Texas19219 Katy FreewayHouston, TX 77094jeff.schubert@aecom.comO – 281.647.4442C – 281.906.6882 Donnie TynanBusiness Development – East Texas, Mid-condonnie.tynan@aecom.comC – 903.692.2113 Julie (Winningham) BirdSr. Business Development – Rockiesjulie.winningham-bird@aecom.comC – 720.438.0246 Ryan WaldenBusiness Development – Rockiesryan.walden@aecom.comC – 307.259.5493 Shawn GipsonBusiness Development – South & Central Texasshawn.gipson@aecom.comC – 830.399.9185

Bruce ErbeleBusiness Development – JW Williams, Inc.Bruce.erbele@aecom.comC – 713.259.9518