Juniper SSG 5
8
At first system should be in DHCP mode and connect to e0/2. It will automatically detect the ip range from Class C IP Address: 192.168.1.33/24 Gateway : 192.168.1.1 Enter into the product: http://192.168.1.1 Username: netscreen Password: netscreen
description
Juniper SSG 5
Transcript of Juniper SSG 5
Enter into the product
At first system should be in DHCP mode and connect to e0/2.It will automatically detect the ip range from Class C
IP Address: 192.168.1.33/24
Gateway : 192.168.1.1
Enter into the product:http://192.168.1.1
Username: netscreenPassword: netscreen
Home Page
Go to network>interfaces>list
Lan IP Details: (Trust Port)
WAN IP : (Un trust Port)
WAN is UP
Date & Time:
System Logs:
The below screenshot is taken from laptop is directly connected to 3750 switch and take the SSG 5 via GUI:
Reachability from LAN & WAN