701 N. Church St.Bloomfield, NM 87413

505-399-9648jortega_33@hotmial.com

JUAN ORTEGA

OBJECTIVE Actively pursuing long term employment with a company in the Oil and Gas industry throughout the U.S and/or Internationally. Seeking a position that would utilize my 18 years of Oilfield experience.

SKILLS & ABILITIES Strong work ethic with priority to safety.

Possess a current Passport

EXPERIENCE WELL TESTER II, KEY ENERGY ODESSA, TX

April 2014- July 2015

Maintain and oversee all phases of the Flow back and well testing services being provided on customer locations. Knowledge of well testing equipment, operations, and services. Load, unload, and assemble equipment with the assistance of other operators. Set up services units and assist the rig up. Provide training, guidance and leadership in the operation of well testing equipment to less experienced personnel. Familiar with correct SOP & HSE procedures and performance of basic routine equipment maintenance. Observant of safe working practices, safety rules, and regulations. Effective in communication of well performance the use of flow back/well testing reporting.

DRILLER, KEY ENERGY ODESSA, TX

July 2011-April 2014

Operating the rig and equipment as requested by the company contracting the rig. Responsible for maintaining productivity standards for all rig functions while ensuring quality products and services are provided to the customer. Comply with all safety procedures and applicable government regulations as to ensure a safe working environment. Establish and maintain a positive work environment for rig crew members.

DERRICK HAND, DOYON DRILLING ANCHORAGE, AK

February 2009-February 2011

Assist the Driller by maintaining all equipment related to the circulating system, as well as guiding the pipe while positioned in the derrick. Operate, monitor, and maintain all drilling fluid systems and equipment associated in drilling oil and gas wells. Direct and coordinate all work activities associated with drilling fluid systems and equipment. Adhere to all company policies, procedures and Government safety regulations pertaining to the worksite. Supervise and maintain mud systems while preparing and testing all mud circulating equipment. Monitor mud pumps, mud volume, and mud properties as directed and advise Driller of losses and gains.

TOOL PUSHER, SCORPION DRILLING FARMINGTON, NM

October 2008-February 2009

Oversee rig Operations including the work activities of all rig employees assigned to each rig. Prepare/monitor work schedule ensuring work is completed on schedule and safety processes and procedures are followed. Monitor employees’ performance and progress. Provide crew members with appropriate tools/supplies. Offer proper guidance and direction to rig crew on specific tasks. Plan and coordinate job procedures with customers, vendors, and other contractors. Assure supplies are adequate and work is carried out according to established specifications. Conduct monthly rig inspections. Prepare required drilling reports, rig operations-related reports and job safety analysis forms.

DRILLER, CYCLONE DRILLING GILLETTE, WY

October 2005-January 2007

Control operations depending on drilling efficiency and formations. Make trips as necessary to change bits, tools, and drilling string length. Report any unusual occurrences such as rate penetration, mud weight, loss of circulation or other changes in hole condition. Conduct regular shut-in drills with all members of the drill crew. Recognize pressure problems with the hole, line up choke manifold and stand pipe, as well as recognize kicks, shut the well in and circulate out. Responsible for slipping and cutting drill line and string up and string down the block. Assist service personnel and coordinate drill crew during operations. Maintain a continuous log on the well’s history. Train and develop subordinate personnel while safeguarding all work in a safe manner and with proper safety equipment.

DRILLER, AZTEC WELL SERVICE AZTEC, NM

January 1997-October 2005

January 2007-October 2008

Supervise and monitor the day to day activities of the drilling crew which included making sure they were motivated, working safely, and completing tasks in a timely matter. Ensure that all employees wear the appropriate Personal Protective Equipment (PPE). Conduct and supervise regular safety meetings. Attend pre-tour meetings on a daily basis to make sure all goals and objectives are set for the current day. Inspect drilling rig and ensure that it meets compliance with all regulatory body standards. Maintain drilling rig as to always operate with safe well control practices in mind. Keep a daily log on the daily well history that includes drilling rate, any problems encountered and downtime etc. Update the rig manager on any unusual occurrence or changes in the hole condition that could affect productivity or compromise the crew members safety. Participate in any test to the equipment that is required throughout the drilling process. Preserve good safety practices and housekeeping while overseeing rig out and rig up activities.

EDUCATION CUBA HIGH SCHOOL- CUBA, NM

Well Control Training – San Juan College School of Energy

Page 2

COMMUNICATION Bilingual English and Spanish

REFERENCES JAMES CASAUS

Precision Drilling

505-486-3990

REGGIE CANDALARIA

Exterran

505-330-8773

Sean Whitaker

Edge Oilfield Services

817-404-9309

Ozzy

Edge Oilfield Services

956-342-5134

More References available upon request

Page 3