Journal of Asian Ceramic Societies 2 / 3 ISSN 2187-0764 · 2017. 2. 1. · ceramics by bead milling...

1
ISSN 2187-0764

Transcript of Journal of Asian Ceramic Societies 2 / 3 ISSN 2187-0764 · 2017. 2. 1. · ceramics by bead milling...

Page 1: Journal of Asian Ceramic Societies 2 / 3 ISSN 2187-0764 · 2017. 2. 1. · ceramics by bead milling and adding lower-temperature sintering aids M. MATSUOKA, ... In vitro bioactivity

2 / 3 Journal of A

sian Ceram

ic Societies Vol . 2 ( 2014 ) 185 – 304

Journal of Asian Ceramic Societies

Volume 2 , Issue 3 September 2014

Available online at www.sciencedirect.com

Co-planar single chamber solid oxide fuel cells with concentric electrodesD. LEE, J. KIM, J. MOON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185

Gas separation using Knudsen and surface diffusion II: Effects of surface modifi cation of epoxy/porous SiO2 compositeT. ISOBE, M. NISHIMURA, Y. TAKADA, S. MATSUSHITA, S. HONDA, Y. IWAMOTO, A. NAKAJIMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190

Novel environment-friendly inorganic red pigments based on (Bi, Er, Y, Fe)2O3 solid solutionsWENDUSU, T. MASUI, N. IMANAKA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195

Improvement of strength of carbon nanotube-dispersed Si3N4 ceramics by bead milling and adding lower-temperature sintering aidsM. MATSUOKA, J. TATAMI, T. WAKIHARA, K. KOMEYA, T. MEGURO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199

Spark plasma sintering of cBN(core)/SiO2(shell) powder prepared by rotary chemical vapor depositionJ. ZHANG, H. KATSUI, Z. HE, T. GOTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204

In vitro bioactivity of 3D Ti-mesh with bioceramic coatings in simulated body fl uidW. YI, X. SUN, D. NIU, X. HU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210

Systematic study on densifi cation of alumina fi ne powder during milliwave sintering at 28 GHzG. MAIZZA, S. GRASSO, Y. SAKKA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215

Effect of water absorption on the mechanical properties of cotton fabric-reinforced geopolymer compositesT. ALOMAYRI, H. ASSAEDI, F.U.A. SHAIKH, I.M. LOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223

Ridge waveguide using highly oriented BaTiO3 thin fi lms for electro-optic applicationI.-D. KIM, Y. AVRAHAMI, L. SOCCI, F. LOPEZ-ROYO, H.L. TULLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231

Exhaust gas analysis and formation mechanism of SiC nanowires synthesized by thermal evaporation methodN. JIRABORVORNPONGSA, S. ENOMOTO, M. IMAI, K. YOSHIDA, T. YANO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235

Fabrication, bioactivity, in vitro cytotoxicity and cell viability of cryo-treated nanohydroxyapatite–gelatin–polyvinyl alcohol macroporous scaffoldS.K. SWAIN, D. SARKAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241

Infl uence of zinc incorporation on microstructure of hydroxyapatite to characterize the effect of pH and calcination temperaturesH. ESFAHANI, E. SALAHI, A. TAYEBIFARD, M.R. RAHIMIPOUR, M. KEYANPOUR-RAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248

Synthesis and photocatalytic properties of α-ZnWO4 nanocrystals in tungsten zinc borate glassesT. IDA, K. SHINOZAKI, T. HONMA, T. KOMATSU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253

Hydrothermal synthesis of magnetite particles with uncommon crystal facetsJ. SATO, M. KOBAYASHI, H. KATO, T. MIYAZAKI, M. KAKIHANA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258

Talc as raw material for cementitious products formulationC.J. NGALLY SABOUANG, J.A. MBEY, LIBOUM, F. THOMAS, D. NJOPWOUO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263

Ethylene glycol assisted low-temperature synthesis of boron carbide powder from borate citrate precursorsRAFI-UD-DIN, G.H. ZAHID, Z. ASGHAR, M. MAQBOOL, E. AHMAD, T. AZHAR, T. SUBHANI, M. SHAHZAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268

Immunoprecipitation of bisphenol A by antibody-mesoporous silica compositesT. ORITA, M. TOMITA, K. NAKANISHI, K. KATO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275

Preparation and characterization of TiC particulate locally reinforced steel matrix composites from Cu–Ti–C system with various C particlesY. LIANG, Q. ZHAO, Z. ZHANG, X. LI, L. REN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281

Soft-chemical synthesis and catalytic activity of Ni-Al and Co-Al layered double hydroxides (LDHs) intercalated with anions with different charge densityT. TAKEI, A. MIURA, N. KUMADA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289

Effect of vanadic anhydride and copper oxide on the development of hard porcelain composite and its antibacterial activityA. KOOL, P. THAKUR, B. BAGCHI, U. RAJAK, T. DAS, S. KAR, G. CHAKRABORTY, T.K. MUKHOPADHYAY, S. DAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297

ISSN 2187-0764

ScienceDirect