Fire protection for structural steel

Steelmaster

Steelmaster

Des

ign

ed b

y Fo

cus

Inte

gra

ted

Mar

keti

ng

Co

mm

un

icat

ion

s, U

K C

ode:

8M

M05

3806

9 - 0

510/

3K

AUSTRALIAJotun Australia Pty. Ltd.,P.O.Box 105, Altona North,9 Cawley Road,BROOKLYN, VIC 3025Tel: +61 3 9314 0722Fax: +61 3 9314 0423

BRAZILJotun Brasil Ltda.Av Santa Luzia, 2084 - Santa Luzia24.722-315 São GonçaloRIO DE JANEIROTel: +55 21 2776 1313Fax: +55 21 2776 2263

P.R. of CHINAJotun Coatings (Zhangjiagang) Co. Ltd.Jotun COSCO Marine Coatings (Qingdao) Co. Ltd.Floor 20, Jiu Shi Mansions,No. 28 Zhong Shan Road (South)SHANGHAI 200010Tel: +86 21 6333 080 0Fax: +86 21 6326 968 6

Jotun Coatings (Zhangjiagang) Co. Ltd.Jotun COSCO Marine Coatings (Qingdao) Co. Ltd.Room 709-12, Goldlion Digital NetworkCentre, 138 Tiyu Road East,GUANGZHOU, 510620Tel: +86 20 38 78 07 49Fax: +86 20 38 78 19 66

HONG KONGJotun COSCO Marine Coatings (H.K.) LtdRoom 1208, 12/F, Stanhope House734 King’s Road, Quarry BayHONG KONGTel: +852 2527 6466Fax: +852 2861 1307

DENMARKJotun Danmark A/S Jotun CoatingsColumbusvej 5, 2860 Søborg,COPENHAGENTel: +45 4492 9400Fax: +45 4492 9401

EGYPTEl Mohandes Jotun S.A.E.El Sheikh Aly Gad El Haq StreetFlorida Mall, Masaken Sheraton – 4th FloorCAIROTel: +20 2265 1800Fax: +20 2265 1801

FINLANDNor-Maali OYVanhatie 20, 15240 LAHTITel: +358 3 874 650Fax: +358 3 874 6550

FRANCEJotun France S.A.22/24 Rue du President Wilson, Bat.A92300 LEVALLOIS PERRETTel: +33 1 4519 3882Fax: +33 1 4519 3894

GERMANYJotun (Deutschland) GmbHHaferweg 3822769 HAMBURGTel: +49 40 851 960Fax: +49 40 856 234

GREAT BRITAINJotun Paints (Europe) Ltd.Stather Road, Flixborough,SCUNTHORPE DN15 8RRTel: +44 1724 400 000Fax: +44 1724 400 100

GREECEJotun Hellas Ltd.Skouze 26 Str.,PIREAUS 18536Tel: +30 210 42 85 980-82+30 210 42 86 035-37Fax: +30 210 42 85 983

INDIAJotun India Pvt Ltd.204 & 205 Ascot Centre,Sahar Road, Andheri (East)MUMBAI 400 099Tel: +91 22 2822 4600+91 22 2820 5900 (+fax)Fax: +91 22 2820 5900

INDONESIAP.T. Jotun Indonesia Paints and Chemi-calsKawasan Industri MM2100Blok KK-1, Cikarang BaratBekasi 17520Tel: +62 21 8998 2657Fax: +62 21 8998 2658

IRELANDJotun (Ireland) Ltd.,Unit K7, Marina Commercial Park,Centre Park Road, CORKTel: +353 214 965955Fax: +353 214 965992

ITALYJotun Italia S.P.A.Via Petronio, 8, Zona Ind. Noghere34147 - MUGGIA (TRIESTE)Tel: +39 040 23 98204Fax: +39 040 23 98222

KOREA (SOUTH)Chokwang-Jotun Ltd.30th Block Jisa Science Park,1205 Jisa-dong, Gangseo-gu,BUSAN 618-230Tel: +82 517 976 000Fax: +82 517 117 735

LIBYAJotun Libya J.S.CoAl Mumtaz Imp. of Paints and Equipm. Co.P.O.Box 6850Hail Al Andalous districtTRIPOLITel:+218 214777811Fax:+218 214780718

MALAYSIAJotun (Malaysia) Sdn. Bhd.Lot 7 Persiaran Perusahaan,Section 23, P.O. Box 705040700 SHAH ALAMTel: +60 351 235 500Fax: +60 351 235 632

THE NETHERLANDSJotun B.V.Postbus 2083200 AE SPIJKENISSEVisiting address:Curieweg 11b, 3208 KJ SpijkenisseROTTERDAMTel: +31 181 678 300Fax: +31 181 617 899

NORWAYJotun A/SP.O.Box 2021,3248 SANDEFJORDVisiting address:Hystadveien 167, 3209 SandefjordTel: +47 33 45 70 00Fax: +47 33 45 79 00

OMANJotun Paints Co. LLCRusayl Ind. Estate, Road No.10P.O. Box 672 Code 111, MUSCATTel: +968 2444 6100Fax: +968 2444 6105

PAKISTANJotun Pakistan (Pvt.) LimitedPlot no. 2-H, Sector 5Korangi Indstrial Area, KARACHITel: +92 213 5121 491-2Fax: +92 213 5121 493

POLANDJotun Polska Sp.zo.o.Ul. 10 Lutego 16, 81-364 GDYNIATel: +48 58 555 1515Fax: +48 58 781 9692

RUSSIAJotun Paints O.O.O.Stachek Avenue 57, No.31198096 ST. PETERSBURGTel: +7 81 2332 0080 / 2785 0034Fax: +7 81 2783 0525

SAUDI ARABIAJotun Saudia Co. Ltd.Jeddah Industrial City, Phase 3,P.O.Box 34698, JEDDAH 21478Tel: +966 2635 0535 / 2636 1271Fax: +966 2636 2483

SINGAPOREJotun (Singapore) Pte. Ltd.11&15 Sixth Lok Yang Road,Jurong, SINGAPORE 628111Tel: +65 650 882 88Fax: +65 6265 7484

SOUTH AFRICAJotun Paints South Africa (PTY) Ltd.Wimbledon Road, P.O.Box 187BLACKHEATH 7581Tel: +27 21 905 1070Fax: +27 21 905 1652

SPAINJotun Iberica S.A.Poligon Santa Rita,Calle Estatica no. 3,08755 Castellbisbal,BARCELONATel: +34 937 711 800Fax: +34 937 711 801

SWEDENJotun Sverige ABP.O. Box 151, Klangfärgsgatan 13,421 22 VÄSTRA FRÖLUNDATel: +46 3169 6300Fax: +46 3169 6397

THAILANDJotun Thailand LtdAmata Nakom Ind. Estate (BIPII)700/353 Moo 6 TumbolDonhualoh, Amphur MuangCHONBURI 2000Tel: +66 38 214 824-6/214 347-51Fax: +66 38 214 373/375

TURKEYJotun Boya San. ve Ticaret. A.S.Yeni Camlik Caddesi,Ayaz Sok. No. 2/4, 4. Levent,ISTANBUL 34418Tel: +90 21 2279 7878Fax: +90 21 2279 2549

U. A. E.Abu DhabiJotun Abu Dhabi (LLC)P.O.Box 3714, MussafahABU DHABITel: +971 2551 0300Fax: +971 2551 0232

DubaiJotun U.A.E. Ltd. (LLC)P.O.Box 3671,Al Quoz Industrial AreaDUBAITel: +971 4339 5000Fax: +971 4338 0666

USAJotun Paints, Inc.9203 Highway 23, P.O. Box 159,Belle Chasse, LA 70037Tel: +1 800 229 3538 /+1 504 394 3538Fax: +1 504 394 3726

VIETNAMJotun Paints (Vietnam) Co. Ltd.Song Than Industrial. Zone,No.1 Street 10,Di An District, Binh Duong ProvinceTel: +84 65 074 2206-9Fax: +84 65 074 2205

YEMENJotun Yemen Paints Co. LtdP.O. Box 70183, Al AlamADENTel: +967 2820 546-9Fax: +967 2249 362Tel: +971 4339 5000Fax: +971 4338 0666

Jotun Coatings and Jotun Paints • Divisions of Jotun A/SLegal Jotun entities worldwide are listed. For details of Branch offi ces and Jotun representation in countries not listed, please visit www.jotun.com

HEAD OFFICEJotun A/SP.O.Box 2021, 3248 Sandefjord, NorwayTel: +47 33 45 70 00 Fax: +47 33 45 79 00

www.jotun.com

16432 Outer Lining-AW.indd 116432 Outer Lining-AW.indd 1 8/6/10 16:44:518/6/10 16:44:51

Introducing JotunJotun is a global leader in paints and coatings. We have 74 companies and 40 production facilities on all continents.In addition, Jotun has agents, branch offi ces and distributors in more than 80 countries. Jotun develop, produce and sell cost-effective paint and coatings products, and provide customer service and technical support to residential, marine and protective markets worldwide.

Among Jotun’s diverse range of products are the Steelmaster intumescent coatings for the protection of steelwork against fi re, anti-fouling marine coatings, fusion bond epoxy coatings to prevent corrosion to pipelines, anti-corrosive primers for steel, a wide range of tank linings, decorative paints and stains for masonry and wooden surfaces as well as the Jotafl oor range for concrete fl oor protection.

Jotun takes a responsible approach to health and safety and gives great input to the training of not only their staff, but also users of their products in special Jotun paint schools.

Welcome to Jotun – quality assurance from concept to completion.

For further information on our products, please contact your nearest Jotun offi ce or visit our website at www.jotun.com

Section 1

Introduction to Reactive Fire Protection and SteelmasterThin Film Intumescent Paints

Section 2

Loading Tables

Section 3

Guidance and Application

Section 4

Primers and Topcoats

Section 5

Technical Data

Welcome to SteelmasterIt can take just a few minutes for unprotected steelwork in a building to attain temperatures of around 550°C in a fi re. At this temperature, steelwork loses its load bearing capacity and the structure is likely to collapse, giving the fi re service little time to bring the fi re under control and little time for people to evacuate.

In certain countries, building regulations and legislation demand fi re protection to upgrade the fi re resistance of buildings – and the Jotun range of Steelmaster intumescent coatings can certainly stand the heat. As modern design often involves steel being expressed as an architectural feature, intumescent coatings are frequently the protection of choice.

Solvent-based Steelmaster products offer up to and including 120 minutes of fi re protection and can be applied both on and off site. Jotun’s Steelmaster waterborne product with low odour, is often chosen as the ideal solution for onsite application. A full range of top sealers, both waterborne and solvent-based is also available to complement the intumescents.

The helpful Jotun technical team can offer advice on specifying intumescents, interpreting the different legislation to recommend the most suitable Steelmaster products for your project. Their expertise will take into account the Environmental Protection Act, plus Construction, Design and Management regulations as well as factors such as the design of the structure, conditions during application and exposure conditions.

And the benefi ts of choosing Steelmaster don’t stop there! Jotun is a one-stop shop for fi re and corrosion protection products and services. Jotun even offers a designated Intumescent Paint School for both specifi ers and contractors which can be held in house or at our premises.

Steelmaster - what more could you ask for?

Jotun Protects PropertyJotun’s Steelmaster intumescent coatings were fi rst produced in the UK in 1999, since when, Jotun has protected many prestigious projects such as Hong Kong Airport, Kuala Lumpur Airport, Selfridges Department Store at the Bullring, Birmingham, the Press Centre for the Athens Olympic games, new terminal at Cairo airport, Dubai Metro and Meydan Racecourse.

With the introduction of Steelmaster intumescent coatings, Jotun is now able to offer the building industry a complete range of protective and decorative coatings dealing with the protection of structural steel to the decoration of interior surfaces, wooden doors, and concrete fl oors. A meeting with our technical experts prior to formulating design will ensure a complete understanding of what is required and the formulation of a paint specifi cation, taking into account the type of structure, the years of service required and fi nal cosmetic fi nish.

.

Typical applications

Airports

Shopping centres

Sports stadia

Factories

High-rise buildings

Offi ce blocks

Where aesthetics are important Jotun top sealers are available in a wide range of BS and RAL colours.

Coal fi red steam power plant Class, Suralaya, Indonesia

Dubai Metro, UAE

Steelmaster Products that can stand the heat!Steelmaster – a solvent-based, thin fi lm intumescent coating for the fi re protection of structural steel to provide fi re resistance for up to 120 minutes. Suitable for both interior and exterior protection and may be applied on or off site.

Steelmaster – a single pack, thin fi lm, waterborne, intumescent coating which provides up to 90 minutes fi re protection to structural steelwork in dry internal environments. It has very low odour, making it an ideal solution for on-site application.

Steelmaster primers – Jotun offers a range of anticorrosive primers which have been fi re tested for compatibility with the Steelmaster intumescent coatings to ensure the integrity of the system in terms of fi re performance.

Steelmaster top sealers – a full range of top sealers, both waterborne and solvent-based, are available to complement our range of Intumescent coatings which may be tinted to most BS and RAL colours via Jotun’s MCI (Multicolor Industry) tinting system. Please contact your local protective coatings representative with your individual requirements.

Contact your local Jotun offi ce for a detailed written specifi cation.

Kuala Lumpur Airport, Malaysia

Cairo Airport, Terminal Extension, Egypt

How to specify Steelmaster Increasing environmental awareness combined with legislative pressures such as EPA (Environmental Protection Act) and CDM (Construction, Design and Management) regulations place a demanding burden on the specifi er. The Jotun technical team can give advice about and recommend the Steelmaster products that are most suitable for your project. Factors that need to be considered are not only the design of the structure but also conditions during application and exposure conditions after application. The table below gives environment categories and corrosivity grades.

Loadings

To calculate the appropriate Steelmaster loading, it is necessary to fi rst determine the period of fi re resistance required. Several further factors need to be considered including:-

Shape of the steel and the number of sides exposed

Whether a steel beam, supporting concrete fl oor or supporting column

Its Hp/A value or Section Factor value. Refer to Figure 1

The choice of Steelmaster product

The appropriate Steelmaster loading can then be calculated from the current Steelmaster loading tables.

Atmospheric corrosivity categories and examples of typical environments

Corrosivity Exterior Interiorcategory C1 Very low Heated building with clean atmospheres, e.g. offi ces, shops, schools, hotels.

C2 Low Atmosphere with low level of Unheated buildings where pollution. Mostly rural areas. condensation may occur, e.g. depots, sports halls.

C3 Medium Urban and industrial Production rooms with high atmospheres, moderate sulphur humidity and some air pollution, dioxide pollution. Coastal e.g. food-processing plants, areas with low salinity. laundries, breweries & dairies.

C4 High Industrial areas and coastal Chemical plants, swimming areas with moderate salinity. pools, coastal ship - and boatyards.

C5-I Industrial areas with high Buildings or areas with almostVery high humidity and aggressive permanent condensation and(industrial) atmosphere. with high pollution.

C5-M Coastal and offshore areas Buildings or areas with almostVery high with high salinity. permanent condensation and(marine) with high pollution.

Examples of typical environments in a temperate climate. (Informative only)

Figure 1 Heated perimeter (Hp) to its cross section area (A)

Table issued by Norsk Standard NS-EM ISO 12944-2, fi rst edition 1999. Permission to copy is given by Norges Standardiseringsforbund. NSF cannot be held responsible for the consequences for any inaccuracies.

A

HP

How intumescent provides fi re protection

Jotun’s Steelmaster fi re protection coatings appear identical to conventional paint fi nishes. However in a fi re they swell to become a meringue-like substance which provides vital insulation for the structural steelwork. The degree of fi re protection needed is normally defi ned by building regulations and the thickness of the coating is specifi ed to satisfy those requirements.

Fire resistance is expressed in units of time (generally 30, 60, 90, and 120), so one of the contributory factors to the fi re resistance is the heating rate of the member. This governs the time taken to reach its specifi c failure temperature.

The heating rate of each section will vary depending on its dimensions. A short heavy section will heat up more slowly than a tall light section. (View Figure 2.)

This effect is stated as the ‘Section Factor’ and is denoted at the Hp/A value of the steel section. The Hp/A value is calculated from the dimensions of the steel section.

HP = The perimeter of the steel exposed to the fi reA = The cross sectional area of the section

Heated Perimeter (Hp)Section Factor (Hp/A) = Cross-Sectional Area

The larger the surface area relative to the cross sectional area the higher Hp/A value. Therefore more material is required with a higher Hp/A value.

Figure 2

Fire Tested at Bodycote Warrington Fire Research Centre

Steelwork coated with Steelmaster products

Heated steelwork producing char

Why specify Steelmaster

Steelmaster solvent-based products are suitable for both on site and innovative offsite application.

Where Steelmaster products are specifi ed, Jotun offer technical guidance to assist the applicators to achieve a satisfactory specifi ed standard.

This does not in any way imply liability or absolve the contractorfrom their contractual obligations.

Jotun offer a designated Intumescent Paint School for both specifi ers and contractors which can be held in-house or at our premises.

Hull City Football Ground, UK

Meydan Racehorse, Dubai, UAE

Benefi ts of Steelmaster to the architect

You need Feature of Benefi t Steelmaster

Total protection Combined corrosion One stop solution and fi re protection

Fast track The fastest treatment Saving in time and available with low application costs hazardous solvents

Protection Outstanding durability Ensures that all during storage and water resistance programme needs are met

Ease of repair Steelmaster easily repaired Minimum disruption with Steelmaster Mastic to associated traders

Good appearance High aesthetic value, top Gives the architect more sealer available in most RAL scope to feature steel and BS colours in design

Safety aspects Fully EPA compliant Assists Ensures that CDM regulations specifi er meets legislative requirements

Quality Steelmaster products are Ensures highest possibleAssurance third party accredited to the quality and consistency of approved industry standards the Steelmaster products by Bodycote Warringtons Certifi re Standard

Satellite Building – Central Core,Kuala Lumpur International Airport. The aesthetic features of the building are enhanced by application of Steelmaster

National Convention Centre, Qatar Doha (Project under construction)

Steelmaster 60WBApplication Guidance Notes

The following is for guidance only – more comprehensive details are specifi ed on the Jotun Steelmaster 60WB Technical Data Sheet.

General– Water based intumescent coatings such as 60WB are generally suitable for use in dry/internal environments– Store at temperatures between 5-35ºC– Users should be fully aware of the target wet fi lm thickness requirements for the project before starting application. The thickness must be monitored regularly– Appearance of the coating after application will depend on the method of application, experience of the operator and other factors

Theoretical coverage (not including losses during application)– 1 litre per m2 @ thickness of 1mm/1000 microns wet (0.72mm dry) – 1 spray coat– 0.5 litre per m2 @ thickness of 2mm/2000 microns wet (1.44mm dry) – 2 spray coats

Preparation– Ensure that the surface of the metal is clean, dry and free of all contaminants immediately prior to application of Steelmaster 60WB– Jotun recommends the use of an appropriate matt or low sheen xylene-based primer, such as Penguard Primer, Penguard Special, Penguard Express (2 pack) and Pilot QD Primer (1 pack)

Airless spray applicationFor optimum results please ensure the following requirementsare adhered to:– Minimum pump ratio 45:1– Use of 30 mesh internal fi lter– Tip size 17-21 thousand (0.43 – 0.53mm)

– Typical 30-40º angle (depending on steel size and shape)– Apply each coat with several quick spray “passes”– Maximum thickness per coat 1mm wet (0.72mm dry)– Pressure at tip Minimum 20 MPa (200kp/cm2 2800 psi)

Brush application– Brushes should only be considered for very small areas– Maximum thickness in these instances is 0.56mm wet (0.4mm dry)

Drying– Steelmaster 60WB is a water based product, therefore drying is directly linked to ambient conditions– Each coat must be fully dry before application of the next coat– The coating must be protected from rain and damp conditions. If water-based intumescents become wet, they may blister, wrinkle or crack, requiring remedial work

Topcoating/sealing– Ensure that Steelmaster 60WB is fully dry and that the specifi cation has been achieved before applying a top coat or sealant protection

DisclaimerThe information in this sheet is given to the best ofour knowledge based on laboratory testing and practical experience. However, as the product is often used underconditions beyond our control, we cannot guarantee anythingbut the quality of the product itself. Before any work is carriedout Jotun’s technical staff should be consulted.

Steelmaster 60/120 Application Guidance Notes

The following is for guidance only – more comprehensive details are specifi ed on the Jotun Steelmaster 60/120 Technical Data Sheet and application manual.

General– Regular monitoring of the wet fi lm thickness is essential– Do not thin the product prior to use. It is supplied at the correct concentration for use through suitable spray equipment. Thinning may adversely affect the product’s properties and will reduce volume solids– All equipment must be thoroughly cleaned before and after use High standards of cleanliness are extremely important

Preparation– Ensure that the surface of the metal (substrate) is clean, dry and free of all contaminants immediately prior to application of Steelmaster 60/120– The steelwork must be protected from rain or condensation– Operators must be aware of the target fi lm thickness requirements for the project before starting the application– Primers must be approved for use with intumescents. Typically, Xylene-based alkyd phosphate of epoxy matt or low sheen primers may be used, including Penguard Primer, Penguard Special, Penguard Express (2 pack) and Pilot QD Primer (1 pack)

Airless spray applicationFor optimum results please ensure the followingrequirements are adhered to:– Minimum pump ratio 45:1– Use of 30 mesh internal fi lter – Tip size 19-27 thousand (0.48 – 0.68mm)– Typical 30-40º angle (depending on steel size and shape)– Apply each coat with several quick spray “passes”– Maximum wet fi lm thickness per coat in single spray coat application – 2000 microns in ideal conditions

– Maximum wet fi lm thickness per coat for brush application – 570 microns– It may be necessary to reduce loading per coat for small/intricate steelwork applications– Pressure at tip 25 MPa (250kp/cm2 3600 psi)

Multi-coat spray applicationWhere multi-coat application is required, optimum drying may be achieved by controlling the wet fi lm thickness to approx 1000 microns per coat, with 4-8 hours drying between coats

Topcoating/sealing– For best results use Jotun approved topcoats – The intumescent dry fi lm thickness (DFT) can only be determined once the coating is suitably dry– Before applying a topcoat or sealant, ensure that the specifi ed DFT has been achieved and approved (remembering to deduct primer thickness)

DisclaimerThe information in this sheet is given to the best of our knowledge based on laboratory testing and practical experience. However, as the product is often used under conditions beyond our control, we cannot guarantee anything but the quality of the product itself. Before any work is carried out Jotun’s technical staff should be consulted.

Introducing JotunJotun is a global leader in paints and coatings. We have 74 companies and 40 production facilities on all continents.In addition, Jotun has agents, branch offi ces and distributors in more than 80 countries. Jotun develop, produce and sell cost-effective paint and coatings products, and provide customer service and technical support to residential, marine and protective markets worldwide.

Among Jotun’s diverse range of products are the Steelmaster intumescent coatings for the protection of steelwork against fi re, anti-fouling marine coatings, fusion bond epoxy coatings to prevent corrosion to pipelines, anti-corrosive primers for steel, a wide range of tank linings, decorative paints and stains for masonry and wooden surfaces as well as the Jotafl oor range for concrete fl oor protection.

Jotun takes a responsible approach to health and safety and gives great input to the training of not only their staff, but also users of their products in special Jotun paint schools.

Welcome to Jotun – quality assurance from concept to completion.

For further information on our products, please contact your nearest Jotun offi ce or visit our website at www.jotun.com

Fire protection for structural steel

Steelmaster

Steelmaster

Des

ign

ed b

y Fo

cus

Inte

gra

ted

Mar

keti

ng

Co

mm

un

icat

ion

s, U

K C

ode:

8M

M05

3806

9 - 0

510/

3K

AUSTRALIAJotun Australia Pty. Ltd.,P.O.Box 105, Altona North,9 Cawley Road,BROOKLYN, VIC 3025Tel: +61 3 9314 0722Fax: +61 3 9314 0423

BRAZILJotun Brasil Ltda.Av Santa Luzia, 2084 - Santa Luzia24.722-315 São GonçaloRIO DE JANEIROTel: +55 21 2776 1313Fax: +55 21 2776 2263

P.R. of CHINAJotun Coatings (Zhangjiagang) Co. Ltd.Jotun COSCO Marine Coatings (Qingdao) Co. Ltd.Floor 20, Jiu Shi Mansions,No. 28 Zhong Shan Road (South)SHANGHAI 200010Tel: +86 21 6333 080 0Fax: +86 21 6326 968 6

Jotun Coatings (Zhangjiagang) Co. Ltd.Jotun COSCO Marine Coatings (Qingdao) Co. Ltd.Room 709-12, Goldlion Digital NetworkCentre, 138 Tiyu Road East,GUANGZHOU, 510620Tel: +86 20 38 78 07 49Fax: +86 20 38 78 19 66

HONG KONGJotun COSCO Marine Coatings (H.K.) LtdRoom 1208, 12/F, Stanhope House734 King’s Road, Quarry BayHONG KONGTel: +852 2527 6466Fax: +852 2861 1307

DENMARKJotun Danmark A/S Jotun CoatingsColumbusvej 5, 2860 Søborg,COPENHAGENTel: +45 4492 9400Fax: +45 4492 9401

EGYPTEl Mohandes Jotun S.A.E.El Sheikh Aly Gad El Haq StreetFlorida Mall, Masaken Sheraton – 4th FloorCAIROTel: +20 2265 1800Fax: +20 2265 1801

FINLANDNor-Maali OYVanhatie 20, 15240 LAHTITel: +358 3 874 650Fax: +358 3 874 6550

FRANCEJotun France S.A.22/24 Rue du President Wilson, Bat.A92300 LEVALLOIS PERRETTel: +33 1 4519 3882Fax: +33 1 4519 3894

GERMANYJotun (Deutschland) GmbHHaferweg 3822769 HAMBURGTel: +49 40 851 960Fax: +49 40 856 234

GREAT BRITAINJotun Paints (Europe) Ltd.Stather Road, Flixborough,SCUNTHORPE DN15 8RRTel: +44 1724 400 000Fax: +44 1724 400 100

GREECEJotun Hellas Ltd.Skouze 26 Str.,PIREAUS 18536Tel: +30 210 42 85 980-82+30 210 42 86 035-37Fax: +30 210 42 85 983

INDIAJotun India Pvt Ltd.204 & 205 Ascot Centre,Sahar Road, Andheri (East)MUMBAI 400 099Tel: +91 22 2822 4600+91 22 2820 5900 (+fax)Fax: +91 22 2820 5900

INDONESIAP.T. Jotun Indonesia Paints and Chemi-calsKawasan Industri MM2100Blok KK-1, Cikarang BaratBekasi 17520Tel: +62 21 8998 2657Fax: +62 21 8998 2658

IRELANDJotun (Ireland) Ltd.,Unit K7, Marina Commercial Park,Centre Park Road, CORKTel: +353 214 965955Fax: +353 214 965992

ITALYJotun Italia S.P.A.Via Petronio, 8, Zona Ind. Noghere34147 - MUGGIA (TRIESTE)Tel: +39 040 23 98204Fax: +39 040 23 98222

KOREA (SOUTH)Chokwang-Jotun Ltd.30th Block Jisa Science Park,1205 Jisa-dong, Gangseo-gu,BUSAN 618-230Tel: +82 517 976 000Fax: +82 517 117 735

LIBYAJotun Libya J.S.CoAl Mumtaz Imp. of Paints and Equipm. Co.P.O.Box 6850Hail Al Andalous districtTRIPOLITel:+218 214777811Fax:+218 214780718

MALAYSIAJotun (Malaysia) Sdn. Bhd.Lot 7 Persiaran Perusahaan,Section 23, P.O. Box 705040700 SHAH ALAMTel: +60 351 235 500Fax: +60 351 235 632

THE NETHERLANDSJotun B.V.Postbus 2083200 AE SPIJKENISSEVisiting address:Curieweg 11b, 3208 KJ SpijkenisseROTTERDAMTel: +31 181 678 300Fax: +31 181 617 899

NORWAYJotun A/SP.O.Box 2021,3248 SANDEFJORDVisiting address:Hystadveien 167, 3209 SandefjordTel: +47 33 45 70 00Fax: +47 33 45 79 00

OMANJotun Paints Co. LLCRusayl Ind. Estate, Road No.10P.O. Box 672 Code 111, MUSCATTel: +968 2444 6100Fax: +968 2444 6105

PAKISTANJotun Pakistan (Pvt.) LimitedPlot no. 2-H, Sector 5Korangi Indstrial Area, KARACHITel: +92 213 5121 491-2Fax: +92 213 5121 493

POLANDJotun Polska Sp.zo.o.Ul. 10 Lutego 16, 81-364 GDYNIATel: +48 58 555 1515Fax: +48 58 781 9692

RUSSIAJotun Paints O.O.O.Stachek Avenue 57, No.31198096 ST. PETERSBURGTel: +7 81 2332 0080 / 2785 0034Fax: +7 81 2783 0525

SAUDI ARABIAJotun Saudia Co. Ltd.Jeddah Industrial City, Phase 3,P.O.Box 34698, JEDDAH 21478Tel: +966 2635 0535 / 2636 1271Fax: +966 2636 2483

SINGAPOREJotun (Singapore) Pte. Ltd.11&15 Sixth Lok Yang Road,Jurong, SINGAPORE 628111Tel: +65 650 882 88Fax: +65 6265 7484

SOUTH AFRICAJotun Paints South Africa (PTY) Ltd.Wimbledon Road, P.O.Box 187BLACKHEATH 7581Tel: +27 21 905 1070Fax: +27 21 905 1652

SPAINJotun Iberica S.A.Poligon Santa Rita,Calle Estatica no. 3,08755 Castellbisbal,BARCELONATel: +34 937 711 800Fax: +34 937 711 801

SWEDENJotun Sverige ABP.O. Box 151, Klangfärgsgatan 13,421 22 VÄSTRA FRÖLUNDATel: +46 3169 6300Fax: +46 3169 6397

THAILANDJotun Thailand LtdAmata Nakom Ind. Estate (BIPII)700/353 Moo 6 TumbolDonhualoh, Amphur MuangCHONBURI 2000Tel: +66 38 214 824-6/214 347-51Fax: +66 38 214 373/375

TURKEYJotun Boya San. ve Ticaret. A.S.Yeni Camlik Caddesi,Ayaz Sok. No. 2/4, 4. Levent,ISTANBUL 34418Tel: +90 21 2279 7878Fax: +90 21 2279 2549

U. A. E.Abu DhabiJotun Abu Dhabi (LLC)P.O.Box 3714, MussafahABU DHABITel: +971 2551 0300Fax: +971 2551 0232

DubaiJotun U.A.E. Ltd. (LLC)P.O.Box 3671,Al Quoz Industrial AreaDUBAITel: +971 4339 5000Fax: +971 4338 0666

USAJotun Paints, Inc.9203 Highway 23, P.O. Box 159,Belle Chasse, LA 70037Tel: +1 800 229 3538 /+1 504 394 3538Fax: +1 504 394 3726

VIETNAMJotun Paints (Vietnam) Co. Ltd.Song Than Industrial. Zone,No.1 Street 10,Di An District, Binh Duong ProvinceTel: +84 65 074 2206-9Fax: +84 65 074 2205

YEMENJotun Yemen Paints Co. LtdP.O. Box 70183, Al AlamADENTel: +967 2820 546-9Fax: +967 2249 362Tel: +971 4339 5000Fax: +971 4338 0666

Jotun Coatings and Jotun Paints • Divisions of Jotun A/SLegal Jotun entities worldwide are listed. For details of Branch offi ces and Jotun representation in countries not listed, please visit www.jotun.com

HEAD OFFICEJotun A/SP.O.Box 2021, 3248 Sandefjord, NorwayTel: +47 33 45 70 00 Fax: +47 33 45 79 00

www.jotun.com

16432 Outer Lining-AW.indd 116432 Outer Lining-AW.indd 1 8/6/10 16:44:518/6/10 16:44:51