JOSEPH MADY PAS 1192 TO ISO 19650 - Cita · 2018. 12. 3. · UK standards BS 1192 IS EN ISO 19650-1...
Transcript of JOSEPH MADY PAS 1192 TO ISO 19650 - Cita · 2018. 12. 3. · UK standards BS 1192 IS EN ISO 19650-1...
JOSEPH MADY
TRANSITIONING FROM PAS 1192 TO ISO 19650
TRANSITIONING FROM PAS 1192 TO ISO 19650
• Introduction
• Digital Construction Technologies Group
• BRE
• NBC Roadmap
• Current ISO process
• PAS 1192 vs ISO 19650
Agenda
• B.Eng Tech, Electrical Services Engineering, DIT
• BSc, Electrical Services & Energy Management, DIT
• MSc, Applied Building Information Modelling & Management, DIT
• MSc, Business (Leadership & Management Practice), UCD
• Member Chartered Quality Institute (CQI)
• 15 years’ industry experience (trade background)
• Part time Lecturer DIT/SCSI
• Contributed to the creation of course
• NSAI BIM Working Group Member
• Reviewing National BIM Standards
• Assessing ISO standards
• CIF Committee 4.0 Member
• Active working group member
• Bidding for BIM
• Starter pack (Doc 3)
• Eastern Region BIM Member
• Steering Committee member
• ETOS (TEEU)
• Enable the creation of a BIM training course
Joseph Mady MSc, BSc, B.Eng
TRANSITIONING FROM PAS 1192 TO ISO 19650
Insert keynote titlehere over as many lines as necessary
TRANSITIONING FROM PAS 1192 TO ISO 19650
BIM
Resilience
Energy
InnovationFire
Safety
– Worlds first building sciencecentre
– Set up by Government in 1921 to improve the quality and performance ofbuildings
– Privatised in 1997 - now owned by the BRE TrustCharity
Resilience
TRANSITIONING FROM PAS 1192 TO ISO 19650
What do?
Consultancy
ProductsHome Quality Mark
SMARTWaste
Yellow Jacket
Site Smart
BREEAM
Testing &Certification
e.g. ISO, CE Marking
Research
InnovationsPark
BREAcademy
Events & Conferences
InnovationsPark
Events & Conferences
TRANSITIONING FROM PAS 1192 TO ISO 19650
ONLINE TRAINING COURSES
BIM LEVEL 2 FUNDEMENTALS
BIM PIM / TIM
BIM LEVEL 2 CERTIFIED PRACTITIONER SCHEME
BUSINESS SYSTEM CERTIFICATION
TRANSITIONING FROM PAS 1192 TO ISO 19650
TRANSITIONING FROM PAS 1192 TO ISO 19650
Committee: ISO/TC 59/SC13 Construction works information
ISO 19650-1 BIM Concepts and principles (based on IS 1192) (Anticipated Nov 2018)
ISO 19650-2 BIM Delivery phase of assets (based on PAS 1192-2) (Anticipated Nov 2018)
ISO 19650-3 Operational phase of assets (based on PAS 1192-3) (Anticipated 2020)
ISO 19650-5 Security-minded approach to information management
(based on PAS 1192-5) (Anticipated 2020)
Committee: NSAI Technical Committee
Coordinates Ireland input into CEN an ISO
Adopts ISs and ISOs as Irish Standards
Develops a local annex document
Committee: CEN/TC 442 Building Information Modelling
Adopts ISO/IECs i.e. all of the above
Develops ENs to complement ISO/IEC
Product data templates, data dictionaries and smart CE Marking
TRANSITIONING FROM PAS 1192 TO ISO 19650
2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021
Lord Francis
Maude
Government
Construction
Strategy
Making BIM Level 2 ‘Business As Usual’
IS 1192:
2007
PAS 1192-5 PAS 1192-2 PAS 1192-3
BS 8536-1 BS 8536-2BS 1192-4
PAS 1192-6
Level 2 BIM Mandate
Release of the NBC roadmap
Low
Carbon
Construction
Report
BIM
Strategy
Paper
Supporting standards
Formation of NBC
Formation of BIM Task
Group
NSAI Mirror committee
IS EN ISO 19650-1 + National Foreword
IS EN ISO 19650-2 + National Annex
PD 19650-0 Guide to IS EN ISO 19650
TRANSITIONING FROM PAS 1192 TO ISO 19650
UK standards
BS 1192
IS EN ISO 19650-1 + National Foreword
PD 19650-0 Guide to IS EN ISO 19650
Q1 2019
IS EN ISO 19650-2 + National Annex
IS EN ISO 19650-1: 2018
Organization of information about construction works —Information management using building information modelling —Part 1: Concepts and principles
IS EN ISO 19650-2: 2018
Organization of information about construction works —Information management using building information modelling —Part 2: Delivery phase of the assets
PD 19650-0:2018
Organization of information about construction works —Information management using building information modelling –Part 0: Guide to IS EN ISO 19650:2018
Organization of information about construction works —Information management using building information modelling –Part 0: Guide to IS EN ISO 19650:2018
International standards
TRANSITIONING FROM PAS 1192 TO ISO 19650
IS EN ISO 19650-1 + National Foreword
PD 19650-0 Guide to IS EN ISO 19650
IS EN ISO 19650-2 + National Annex
IS EN ISO 19650-1: 2018
Organization of information about construction works — Information management using building information modelling — Part 1: Concepts and principles
IS EN ISO 19650-2: 2018
Organization of information about construction works — Information management using building information modelling — Part 2: Delivery phase of the assets
PD 19650-0:2018
Organization of information about construction works — Information management using building information modelling – Part 0: Guide to IS EN ISO 19650:2018
Organization of information about construction works — Information management using building information modelling – Part 0: Guide to IS EN ISO 19650:2018
+
PAS 1192-5:2015
PAS 1192-3:2014 BS 1192-4:2014
BS 8536-1&2
TRANSITIONING FROM PAS 1192 TO ISO 19650
NOTE: DCT CAN SUPPORT THIS TRANSITION
TRANSITIONING FROM PAS 1192 TO ISO 19650
ISO 19650 - 1 & 2 PAS 1192 - 2
Clause Clause
1 Scope (1 & 2) 1 Scope (1 & 2)
2 Normative References (1 & 2) 2 Normative References (1 & 2)
3 Terms and Definitions (1 & 2) 3 Terms and Definitions (1 & 2)
4 Information Management Process (1 & 2) 4 Overview of Documents referenced in Specification
5 Definition of Requirements 5 Information Delivery – Assessment and Need
6 The Information Delivery Cycle 6 Information Delivery – Procurement
7 Project and Asset Information Management Roles
7 Information Delivery – Post Contract Award
8 Container Based Collaborative Working 8 Information Delivery – Information Mobilization
9 Contractor Party Capability and Capacity 9 Information Delivery – Production
10 Information Delivery Planning 10 Information Delivery – Asset Information Model (AIM) Maintenance
11 Managing the Development of Information 11 N/A
12 Common Data Environment 12 N/A
Note: when ISO 19650 allows a local annex document
TRANSITIONING FROM PAS 1192 TO ISO 19650
TRANSITIONING FROM PAS 1192 TO ISO 19650
TRANSITIONING FROM PAS 1192 TO ISO 19650
Both parts 1 and 2 have been developed to work in alignment with the already established business management system standard ISO 9001, incorporating the plan-do-check-act principle, as well as ISO 55000 on asset management
The UK-familiar “Level 2” BIM, which the BS/PAS 1192 standards help define, is now referred to as “Stage 2” BIM
Those familiar with PAS 1192-2 will know that the PAS’s structure follows the ‘information delivery cycle’ process. ISO 19650 also follows this cycle, presenting its requirements in a logical flow, mirroring the timeline of the requirements in practice as much as possible from tendering activities through to mobilization and delivery
TRANSITIONING FROM PAS 1192 TO ISO 19650
ISO 19650 re-establishes the importance of the CDE and outlines its principles and core working processes. These include the familiar WIP (work in progress), Shared, Published and Archive areas.
Familiar terminology and concepts found in the ISO/DIS 19650 standards include: BEP (BIM execution plan), MIDP/TIDP (master/task information delivery plan), PIM/AIM (project/asset information model), OIR (organisational information requirements) and AIR (asset information requirements).
The principal project-EIR remains but has had a clarification changing from “employer’s” information requirements to “exchange” information requirements.
TRANSITIONING FROM PAS 1192 TO ISO 19650
TRANSITIONING FROM PAS 1192 TO ISO 19650
ISO 19650 defines the areas that need to have clearly appointed roles, divided into two groups; those involved in the management of information and those involved in production of information. The appointment of these roles, the names of which reflect those in PAS 1192-2 e.g. interface manager, should reflect the nature and complexity of the project and examples of specific tasks are given within an informative (non-mandated) annex.
New definitions include ‘project information protocol’ which defined the terms and clauses of appointment specifically relating to the exchange of information between appointing and appointed parties
TRANSITIONING FROM PAS 1192 TO ISO 19650
ISO 19650-2 states that files should have a unique ID, based on upon an agreed and documented convention. The UK Annex aligns this requirements to the naming convention defined within BS 1192
ISO 19650-2 states that the CDE shall enable each “container” (e.g. file) to have the attributes (meta-data) ‘status’, ‘revision’ and classification. Similar to the above, the UK Annex aligns this requirements to the naming convention defined within BS 1192
TRANSITIONING FROM PAS 1192 TO ISO 19650
➢ Level of Information needed (LOIN)
➢ Familiar terminology and concepts
➢ ISO 19650 information deliver cycle process similar to that as PAS 1192-2
➢ All Countries will have an annex document
➢ Get involved with the NSAI BIM Technical Committee
TRANSITIONING FROM PAS 1192 TO ISO 19650
JOSEPH MADY
TRANSITIONING FROM PAS 1192 TO ISO 19650