Joint Apprenticeship Program Machinery Maintenance Apprenticeship Program Manufacturing& ......
Transcript of Joint Apprenticeship Program Machinery Maintenance Apprenticeship Program Manufacturing& ......
MachineryMaintenance
Mechanic
Courses
Stanislaus County Area
Joint Apprenticeship Program&Manufacturing
Maintenance
The Machinery Maintenance Mechanic Apprenticeship Program is designed for individuals hired as new apprentices by member employers of the Stanislaus County Area Manufacturing and Maintenance Joint Apprenticeship Committee. The program is composed of 576 hours of classroom and lab instruction and 8,000 hours of on-the-job training and is approximately 4 years in length. The program is designed so that the employer hires the apprentice, and the apprentice increases his/her occupational skills and knowledge through On-The-Job Training (OJT) at the employer site while attending specific college courses approved as related supplemental instruction (RSI) at Modesto Junior College. Students interested in more information about the program should contact the MJC Technical Education Office for a listing of member employers.
MFGA 200 Arc and Gas WeldingMFGA 202 Fundamentals of Industrial TechnologyMFGA 203 Industrial Mechanical Components and Equipment MFGA 204 Gas Metal Arc (MIG) and Flux Core Arc Welding (FCAW)MFGA 206 Gas Tungsten Arc Welding (TIG)MFGA 226 Motors, Controls and ControllersMFGA 261 Introduction to Plant MaintenanceMFGA 262 Hydraulics/ PneumaticsMFGA 301 Machine Shop 1MFGA 306 Intro. to Occupational Safety & HealthMFGA 362 Industrial Refrigeration SystemsMFGA 367 Plumbing Principles and MethodsMFGA 376 Mechanical Blue Print Reading
Work Process
Modesto Junior CollegeTechnical Education Division
435 College Avenue • Modesto, CA 95350
(209) 575-6332
Mechanical Skills: (1) observing and applying basic mechanical principles; (2) selecting and applying proper lubrication techniques and practices; (3) installing and repairing basic drive components; (4) lubricating, inspecting and replacing bearings; (5) troubleshooting, inspecting, repairing and installing various types of pumps; (6) Troubleshooting, inspecting, repairing and installing equipment and plant systems, hydraulic systems, and pneumatic systems
Machine Operation: (1) fabricating, repairing and modifying parts with use of various shop machine tools (lathe, mills, saws, drill presses, grinders, etc.)
Welding and Cutting Operations: (1) selecting and utilizing correct welding equipment, methods, and materials; (2) preparing materials for welding operations; (3) performing oxy/acetylene and electric arc welding of various materials; (4) brazing metal materials using oxy/acetylene gas; (5) cutting metal material with oxy/acetylene torch
Packaging Machinery Maintenance: (1) cleaning, operating, changing over, repairing, inspecting, troubleshooting and installing packaging machinery
Rigging and Installation: Rigging, relocating, and installing equipment within plant facility
Maintaining Processing Equipment: Cleaning, operating, repairing, troubleshooting, and installing processing equipment
Perform Basic Electrical Procedures: (1) troubleshoot equipment as to power availability; (2) determine whether it’s an electrical problem or mechanical; (3) safety procedure when dealing with electrical equipment
Total Hours
Hours
1,200
480
480
1,640
240
1,840
920
8,000
Machinery Maintenance Mechanic