JOHN BERENDS IMPLEMENTS Pty. Ltd. - Ararat Auto · 2020. 9. 7. · AERATORS - LINKAGE Prod No. GST...

AGRICULTURAL ENGINEERS

[email protected]

www.johnberendsimplements.com.au

Prices effective 1st December 2010 Prices effective 1st September 2020 All prices quoted ex.factory

All prices subject to change without notification

Product Page No.Aerators 2

Bale Handling Equipment 2

Carryalls 2

Cultivators - "S" Tine Cultivators 3

- Stump Jump Chisel Ploughs 3

- Rigid Tine Chisel Ploughs 3

- Coil tine Cultivators 4

- Deep Tillage Ploughs 4

- Ground Breaker 4

- Disc Ploughs (inc. Gibbins Rawlings) 4,5 & 6

Delver 6

Drain Digger - Rotary 6

Front End Loader Attachments 6

Grader Blades 7

Landscape Rakes 8

Lifting Jibs 8

Mulchers 8

Pallet Forks - linkage 9

Pasture Harrows 9

Post Hole Diggers 9

Post Driver 9

Rippers 10

Slashers -

- TA series (40 HP) 11

- EP (40 HP) 11

- Heavy Duty (75 HP) 11

- Extra Heavy Duty (110 HP) 11,12

- Pasture Toppers 12

- Twin Rotor 12

- Warrior (Unlimited HP) 11,12

Stick Rake 13

Toolbar Equipment (inc. Merbein Ploughs) 13

Tow ball Linkage Hitch 13

JOHN BERENDS

IMPLEMENTS Pty. Ltd.

(Incorporating Gibbins-Rawling)

MACHINERY PRICE LIST

Dandenong South, Victoria 3175 Australia 130 Frankston-Dandenong Road,

Phone (03) 9791 2494 Fax (03) 9794 5568

1

AERATORS - LINKAGEProd No. GST ex. GST inc.

0161 Growmaster 1000 - Single Rotor $3,230.00 $3,553.00




0173 Growmaster 1600 - Double Rotor $5,325.00 $5,857.50







0187 Growmaster 4000 - Four Rotor $12,025.00 $13,227.50

0190 Trailing Wheelkit (inc wheels, drawbar & hydraulic lift) suit 2.4 - 4.0m units $4,120.00 $4,532.00

0169 2.4m Harrows plus lifting frame suit Growmaster 2000 $1,630.00 $1,793.00




BALE HANDLING EQUIPMENT - LINKAGEProd No. GST ex. GST inc.

0285 Round Bale Handler (One large tensile spike, one small spike - both welded) $380.00 $418.00

0286 Bale Fork (Two high Tensile spikes - welded) $580.00 $638.00

0132 6'x3'6" Carryall Platform fits onto Bale Fork (0286) $340.00 $374.00

0289 Silage Forks - Two Conus 2 Tines - 810mm Length $770.00 $847.00





0295 Frames less tines also available $560.00 $616.00

0287 Adjustable Round Bale Feed Out Fork $1,025.00 $1,127.50

0288 Big Square Bale Handling Fork (Three high tensile spikes - welded) $825.00 $907.50

0288S Big Square Bale Handling Fork (Three Conus 2 Tines - 1250mm Length) $1,170.00 $1,287.00

0296 Twin Round Bale Handling Fork (Four high tensile spikes - welded) $1,375.00 $1,512.50

0296S Twin Round Bale Handling Fork (Four Conus 2 Tines - 1250mm Length) $1,840.00 $2,024.00

Other tines type and configurations are available on request

For Front End Loader Attachments refer page 6

CARRYALLSProd No. GST ex. GST inc.

0130 6'x3'6" Hardwood Floor $525.00 $577.50

0135 4'x3' Hardwood Floor $395.00 $434.50

0160 6'x3'6" Metal Floor Plate $670.00 $737.00

0162 4'x3' Metal Floor Plate $525.00 $577.50

2

CULTIVATORS S-Tine Heavy Duty - 45 x 12Prod No. GST ex. GST inc.

0300 2.4m (16 Tines) $1,905.00 $2,095.50

0301 3.0m (20 Tines) $2,445.00 $2,689.50

0302 3.6m (24 Tines) $2,940.00 $3,234.00

0310 Pair Solid Rubber Depth Wheels suit HD 'S' Tine $755.00 $830.50

(HD Tine helpers are available at an additional $25 + GST per tine)

S-Tine Standard - 32 x 10Prod No. GST ex. GST inc.

0311 1.2m (12 Tines) $995.00 $1,094.50

0312 1.6m (16 Tines) $1,240.00 $1,364.00

0313 2.0m (20 Tines) $1,520.00 $1,672.00

0314 2.4m (24 Tines) $1,790.00 $1,969.00

0315 2.8m (28 Tines) $2,060.00 $2,266.00

0220 Pair Pneumatic Depth Wheels (1.2-2.8m) $310.00 $341.00

0316 3.2m (32 Tines) $2,365.00 $2,601.50

0317 3.6m (36 Tines) $2,640.00 $2,904.00

0230 Pair Solid Rubber Depth Wheel (3.2-3.6m) $755.00 $830.50

CRUMBLERS - SUIT ALL 'S' TINE CULTIVATORSProd No. GST ex. GST inc.

0235 1.2m Crumbler $540.00 $594.00

0236 1.6m Crumbler $620.00 $682.00

0237 2.0m Crumbler $700.00 $770.00

0238 2.4m Crumbler $780.00 $858.00

0239 2.8m Crumbler $870.00 $957.00

0242 3.0m Crumbler $960.00 $1,056.00

0240 3.2m Crumbler $1,030.00 $1,133.00

0241 3.6m Crumbler $1,100.00 $1,210.00

FOLDING WING S-TINEProd No. GST ex. GST inc.

0319 5.4m (54 Tines) $10,390.00 $11,429.00

with crumblers/wheels/hydraulic lift

CHISEL PLOUGHS - STUMP JUMPProd No. GST ex. GST inc.

0192 5 Tine - width 5'9" $2,100.00 $2,310.00

0194 7 Tine - width 7'9" $2,700.00 $2,970.00

0196 9 Tine - width 9'9" $3,300.00 $3,630.00

0198 11 Tine - width 11'9" $3,900.00 $4,290.00

0200 Depth Wheels (Pair Holden) $660.00 $726.00

CHISEL PLOUGHS - RIGID TINEProd No. GST ex. GST inc.

0182 5 Tine - width 5'9" $1,620.00 $1,782.00

0183 7 Tine - width 7'9" $2,070.00 $2,277.00

0184 9 Tine - width 9'9" $2,520.00 $2,772.00

0185 11 Tine - width 11'9" $2,970.00 $3,267.00


3

CHISEL POUGHS - COIL TINEProd No. GST ex. GST inc.

0202 5 Tine Coil Tine Cultivator $1,650.00 $1,815.000204 7 Tine Coil Tine Cultivator $2,100.00 $2,310.00

0206 9 Tine Coil Tine Cultivator $2,550.00 $2,805.00

0208 11 Tine Coil Tine Cultivator $3,000.00 $3,300.00


CULTIVATORS - SUB-SOILERSDEEP TILLAGE PLOUGHSProd No. GST ex. GST inc.

0321 2 Tine (narrow single row frame) $2,080.00 $2,288.00

0323 3 Tine (1.8m single row frame) $3,120.00 $3,432.00

0320 5 Tine $4,810.00 $5,291.00

0322 7 Tine $6,550.00 $7,205.00

0324 9 Tine $8,980.00 $9,878.00

0326 11 Tine $12,000.00 $13,200.00

0200 Depth Wheels (Pair Holden) - optional - normally mounted outside frame $660.00 $726.00

0327 14" Coulters (must be ordered with machine) - price per coulter unit $370.00 $407.00

0352 5 Tine Crumbler (Ratchet adjustment) $1,780.00 $1,958.00




0355 Optional Hydraulic Phasing Cylinders to replace ratchets $1,500.00 $1,650.00

GROUND BREAKERSProd No. GST ex. GST inc.

0339 2 Tine (2.0m frame) $3,450.00 $3,795.00

0340 4 Tine (2.0m frame) $4,900.00 $5,390.00

0341 6 Tine (Double frame) $7,150.00 $7,865.00

CULTIVATORS - DISC PLOUGHSLINKAGE OFFSET DISCS - Medium DutyProd No. GST ex. GST inc.

0247 10 Plate - 18" x 4mm scallop discs $2,110.00 $2,321.00

0248 12 Plate - 20' x 4mm scallop discs $2,390.00 $2,629.00

0249 14 Plate - 22' x 5mm scallop discs $3,120.00 $3,432.00

0250 16 Plate - 22' x 5mm scallop discs $3,460.00 $3,806.000252 18 Plate - 22" x 5mm scallop discs $4,240.00 $4,664.00

LINKAGE OFFSET DISCS - Heavy Duty GM40Prod No. GST ex. GST inc.

0810 18 Plate GM40 - 22" x 5mm scallop discs $7,180.00 $7,898.00

0947 Optional Scrapers suit 18 plate GM40 $540.00 $594.00







DISC-UG Upgrade to 24" x 5mm discs (price difference per disc) $15.00 $16.50

0953 Optional Furrow filler (not sold separately) $280.00 $308.00

4

LINKAGE TANDEM DISCS - Heavy Duty TH30Prod No. GST ex. GST inc.

0814 16 Plate TH30 - 22" x 5mm scallop discs $8,795.00 $9,674.50

0946 Optional Scrapers suit 16 plate TH30 $450.00 $495.00






TRAILING OFFSET DISCS - Heavy Duty RM40Prod No. GST ex. GST inc.

0820 16 Plate RM40 - 22" x 5mm scallop discs $10,100.00 $11,110.000821 18 Plate RM40 - 22" x 5mm scallop discs $10,600.00 $11,660.00

0822 20 Plate RM40 - 22" x 5mm scallop discs $11,100.00 $12,210.00



0951 Optional jack $95.00 $104.50



All RM40 trailing discs are fitted standard with scrapers and hydraulic lift







0951 Optional jack $95.00 $104.50






0951 Optional jack $95.00 $104.50


All RM75 trailing discs are fitted standard with scrapers and hydraulic lift















All RM80 trailing discs are fitted standard with scrapers, jack and hydraulic lift

5

TRAILING TANDEM DISCS - Heavy Duty TH100 (hydraulic folding)Prod No. GST ex. GST inc.













0952 Formed Scrapers (price per disc) $25.00 $27.50

All TH100 trailing discs are fitted standard with prong scrapers, jack and hydraulic lift.

DELVERProd No. GST ex. GST inc.

0264 Delver $2,100.00 $2,310.00

DRAIN DIGGERS - ROTARYProd No. GST ex. GST inc.

0145 Rotary Drain Digger $2,360.00 $2,596.00

0146 Rotary Drain Digger c/w 2 Rippers $2,600.00 $2,860.00

FRONT END LOADER ATTACHMENTSProd No. GST ex. GST inc.

0298 Adjustable Pallet Fork - Eurohitch connection $1,050.00 $1,155.00

0299 Silage Forks - 1250mm Long Tines - Eurohitch connection $1,050.00 $1,155.00

0283 Combination Pallet Fork/Silage Fork - Eurohitch connection $1,420.00 $1,562.00

0281 Adjustable Pallet Fork - Kubota Bob Attach connection $1,050.00 $1,155.00

0280 Silage Forks - 1250mm Long Tines - Kubota Bob Attach connection $1,050.00 $1,155.00

0282 Combination Pallet Fork/Silage Fork - Kubota Bob Attach connection $1,420.00 $1,562.00

0297BX Kubota Pallet Fork suit BX Series $690.00 $759.00

0270 Eurohtich FEL Post Hole Digger $2,360.00 $2,596.00

For auger prices refer post hole digger section (page 9)

Some Challenge, Burder and some John Deere hitches are available on request at a surcharge.

6

GRADER BLADESStandard/Medium DutyProd No. GST ex. GST inc.

0002 4' Grader Blade $830.00 $913.00

0016 5' Grader Blade $865.00 $951.50

0008 6' Grader Blade - Standard Fixed Model $910.00 $1,001.00

0003 6' Grader Blade - Standard Offset Model $1,050.00 $1,155.00

0005 6' Grader Blade - MD Model $1,200.00 $1,320.00

0006 6' MD Grader Blade with 4 Rippers $1,550.00 $1,705.00

0007 6' MD Grader Blade complete with Ratchet Tilt $1,680.00 $1,848.00

0010 MD Hydraulic Tilt option suit 0007 - in lieu of Ratchet $480.00 $528.00

0414 6' MD HydraulicGrader Blade - 1 ram (hydraulic angle) $2,700.00 $2,970.00

0415 6' MD HydraulicGrader Blade - 2 ram (hydraulic angle/tilt) $3,200.00 $3,520.00

0001 Grader Blade Wheel Kit (suit 0002 & 0016 models) $315.00 $346.50

0009 Grader Blade Wheel Kit (suit 0003, 0005, 0006 & 0008 models) $295.00 $324.50

0411 Grader Blade Wheel Kit (suit 0007, 0414 & 0415 models) $295.00 $324.50

0418 Boxed ends suit Standard model blades $365.00 $401.50

0419 Boxed ends suit Medium Duty model blades $390.00 $429.00

Heavy Duty0035 6' Grader Blade - HD Model $2,150.00 $2,365.00

0036 7' Grader Blade - HD Model $2,400.00 $2,640.00

0037 8' Grader Blade - HD Model $2,700.00 $2,970.00

0026 Wheel kit suit Hyd/EH/HD G.Blade, Manual ratchet link $620.00 $682.00

0027 Wheel kit suit Hyd/EH/HD G.Blade, Hydraulic c/w Rams & Hoses $1,045.00 $1,149.50

Extra Heavy Duty0039 7' Grader Blade - Extra Heavy Model $3,560.00 $3,916.00

0040 8' Grader Blade - Extra Heavy Model $3,730.00 $4,103.00

0041 EH Hydraulic tilt option - in lieu of ratchet $550.00 $605.00

0042 EH Hydraulic tilt option - as spare part $630.00 $693.00



Hydraulic 0013 8' Hydraulic Grader Blade - 3 Ram $6,650.00 $7,315.00

0014 8' Hydraulic Grader Blade - 2 Ram $6,300.00 $6,930.00

0017 10' Hydraulic Grader Blade -3 Ram $7,455.00 $8,200.50

0028 10' Hydraulic Grader Blade - 2 Ram $7,000.00 $7,700.00



0400 Boxed ends $500.00 $550.00

The following diverter prices reflect the costs when ordered with the machine.

0179 Manual diverter converts 2 pair of hoses into 1 pair of hoses $600.00 $660.00

0180 Electric diverter converts 2 pair of hoses into 1 pair of hoses - no wiring supplied $870.00 $957.00

0181 Electric diverter converts 3 pair of hoses into 1 pair of hoses - no wiring supplied $1,500.00 $1,650.00

Trailing models0425 10' trailing Grader with hyd angle, tilt and wheellift - manual offset $16,275.00 $17,902.50

0426 Optional Offset ram and hoses $780.00 $858.00

0427 12' trailing Grader with hyd angle, tilt and wheellift - no offset (fixed) $16,700.00 $18,370.00

0428 12' trailing Grader with hyd angle, offset, tilt and wheellift $18,000.00 $19,800.00

0429 Optional Angle Ram Relief Valve $1,000.00 $1,100.00

0400 Boxed ends suit all HD, EHD and Hydraulic model blades $500.00 $550.00

All diverter kits are bolted to the headstock and include all relevant hoses and fittings.Wiring and switches at the tractor end are not supplied with the electric model.

7

LANDSCAPE RAKESProd No. GST ex. GST inc.

0371 1.2m (4') Landscape Rake $680.00 $748.00

0372 1.5m (5') Landscape Rake $750.00 $825.00

0373 1.8m (6') Landscape Rake $800.00 $880.00

0374 2.1m (7') Landscape Rake $850.00 $935.00

0377 1.2m (4') Landscape Rake - Tow behind to suit ATVs $730.00 $803.00

0379 1.5m (5') Landscape Rake - Tow behind to suit ATVs $800.00 $880.00

LIFTING JIBSProd No. GST ex. GST inc.

0140 Lifting Jib $300.00 $330.00

0142 Lifting Jib - Heavy Duty $430.00 $473.00

MULCHERS - Low Body c/w rollersProd No. GST ex. GST inc.

0157 Cyclomatic 1500 (4'8") Offset Mulcher $6,400.00 $7,040.00

0126 Cyclomatic 1800 (6') Offset Mulcher $7,000.00 $7,700.00

0122 Cyclomatic 1800 (6') Centre Line Mulcher $7,170.00 $7,887.00





1612 Mulcher Adjustable Skids (Pair) $315.00 $346.50

1611 Mulcher Hydraulic Side Shift (does not suit 0122 model) $1,530.00 $1,683.00

1613 Mulcher Adjustable Pair Solid Rubber Wheels $1,200.00 $1,320.00

MULCHERS - High body c/w skidsProd No. GST ex. GST inc.

0123 Cyclomatic Hi-Body 1800 (6') Offset Mulcher $7,670.00 $8,437.00

0151 Cyclomatic Hi-Body 1800 (6') Centre Line Mulcher $7,840.00 $8,624.00

0121 Cyclomatic Hi-Body 2100 (7') Offset Mulcher $8,380.00 $9,218.00



1613 Mulcher Adjustable pair Solid Rubber Wheels $1,200.00 $1,320.00

1777 Roller Kit c/w Brgs suit 1800 High Body Mulcher $470.00 $517.00



BELTPW Optional Power Wedge belts suits High Body Mulcher $120.00 $132.00

8

PALLET FORKS - LinkageProd No. GST ex. GST inc.

0297 Pallet forks - linkage mount $695.00 $764.50

Pallet forks are also available as a front end loader attachment - refer page 6

PASTURE HARROWSProd No. GST ex. GST inc.

0401 4' Pasture Harrow $585.00 $643.50

0402 6' Pasture Harrow $830.00 $913.00

0403 8' Pasture Harrow $1,075.00 $1,182.50

0404 10' Pasture Harrow $1,330.00 $1,463.00

0405 12' Pasture Harrow $1,630.00 $1,793.00

0406 4' Pasture Harrow lifting frame $520.00 $572.00





POST HOLE DIGGERS & AUGERSProd No. GST ex. GST inc.

0258 Compact PHD less Auger $1,630.00 $1,793.00

0259 Standard PHD less Auger $1,700.00 $1,870.00

0261 Heavy Duty PHD less Auger $2,260.00 $2,486.00

0262 Hydraulic Down Pressure PHD less Auger $3,300.00 $3,630.00

0260 Planetary Drive PHD with Hydraulic Down Pressure less Auger $3,360.00 $3,696.00

0270 Eurohtich FEL Post Hole Digger less Auger $2,360.00 $2,596.00

0279 4" Auger $360.00 $396.00

0265 6" Auger $390.00 $429.00

0267 8" Auger $410.00 $451.00

0269 10" Auger $440.00 $484.00

0271 12" Auger $450.00 $495.00

0273 15" Auger $520.00 $572.00

0275 18" Auger (Suits HD & Hyd) $640.00 $704.00

0277 24" Auger (Suits HD & Hyd) $680.00 $748.00

0357 6" Heavy Duty Trimax Auger (suits Hyd models) $420.00 $462.00






0363 24" Heavy Duty Trimax Auger (suits Hyd models) $965.00 $1,061.50

POSTDRIVERSProd No. GST ex. GST inc.

0263 Post Driver complete with single bank hyd control valve - Lift only $5,550.00 $6,105.00

0266 Post Driver complete with double bank hyd control valve - Lift & Tilt $6,270.00 $6,897.00

0268 Post Driver complete with triple bank hyd control valve - Lift, Tilt & Fore/Aft $6,870.00 $7,557.00

9

RIPPERSSingle TineProd No. GST ex. GST inc.

0024 Compact Single Tine Ripper, 100x25 tine, Cat 0/1 $420.00 $462.00

0020 Standard Single Tine Ripper, 150x32mm tine, Cat 1-2 $520.00 $572.00

0021 Heavy Duty Single Tine Ripper 150x50mm tine, Cat 2 $630.00 $693.00

0022 Pipelaying Attachment suits 0020 & 0021 $300.00 $330.00

0029 Pipelaying Attachment suits 0024 $300.00 $330.00

0144 Mole Drainer $940.00 $1,034.00

Twin TineProd No. GST ex. GST inc.

0047 Twin Tine Ripper, 150 x 32mm tines (2 of) $860.00 $946.00

Multi Tine (125 x 125 frame)Prod No. GST ex. GST inc.

0134 2 Tine Multi Tine Ripper, 150 x 32mm - adjustable $2,150.00 $2,365.00

0133 3 Tine Mulit Tine Ripper, 150 x 32mm - adjustable $2,730.00 $3,003.00

Deep Ripper - Parabolic Tines - (150 x 150 frame)Prod No. GST ex. GST inc.

0412 Single Tine (narrow frame) $1,950.00 $2,145.00

0018 2 Tine (1.8m frame) $3,380.00 $3,718.00

0019 3 Tine (1.8m frame) $4,670.00 $5,137.00

0032 5 tine (2.1m double frame) $7,790.00 $8,569.00

10

All Slashers comply with the WorkSafe Slasher Safety Guide

SLASHERS - TA SERIES (40HP)

Prod No. GST ex. GST inc.

0350 TA 100 (3'4") Slasher - Dual Mount with slip clutch $1,650.00 $1,815.00



0364 TA 150 (5') Slasher - Dual mount with slip clutch $2,050.00 $2,255.00

SLASHERS - EP SERIES (40HP)All EP slashers are standard with front and rear chains.


0051 EP100 (3'4") Slasher - Centre Mount $1,950.00 $2,145.00

0051GAL EP100 (3'4") Slasher - Centre Mount Galvanised deck $2,150.00 $2,365.00

0056 EP120 (3'10") Slasher - Dual Mount $2,050.00 $2,255.00

0056GAL EP120 (3'10") Slasher - Dual Mount Galvanised deck $2,250.00 $2,475.00

0061 EP135 (4'6") Slasher - Dual Mount $2,200.00 $2,420.00

0061GAL EP135 (4'6") Slasher - Dual Mount Galvanised deck $2,410.00 $2,651.00

0062 EP150 (5') Slasher - Dual Mount $2,310.00 $2,541.00

0062GAL EP150 (5') Slasher - Dual Mount Galvanised deck $2,530.00 $2,783.00

0063GAL EP180 (6') Slasher - Dual Mount Galvanised deck - 50HP gearbox $2,890.00 $3,179.00

Options

1588UG Optional Italian Manufactured 40HP Gearbox Upgrade $100.00 $110.00

0065 EP Slasher Wheel Kit (Pneumatic Wheel) $320.00 $352.00

0148 Additonal over-run clutch (suits tractors with single stage clutch) $140.00 $154.00

SLASHERS - HD SERIES (75HP)All HD slashers are standard with front and rear chains.


0076 HD153 (5') Slasher - Dual Mount $3,620.00 $3,982.00

0076GAL HD153 (5') Slasher - Dual Mount Galvanised deck $3,850.00 $4,235.00

0081 HD180 (5'10") Slasher - Dual Mount $4,080.00 $4,488.00

0081GAL HD180 (5'10") Slasher - Dual Mount Galvanised deck $4,320.00 $4,752.00

0110 HD200 (6'6") Slasher - Centre Mount $4,490.00 $4,939.00

0110GAL HD200 (6'6") Slasher - Centre Mount Galvanised deck $4,730.00 $5,203.00

Options

1590UG Optional Italian Manufactured 75HP Gearbox Upgrade $100.00 $110.00

0095 Heavy Duty Slasher Wheel Kit Solid Rubber Wheel $550.00 $605.00

SLASHERS - EXTRA HEAVY DUTY and WARRIORAll EHD & Warrior slashers are standard with front and rear chains


0094 EHD180 (5'10") Slasher - Adjustable Skids $5,720.00 $6,292.00

0087 EHD180 (5'10") Slasher - Adjustable Skids Offset $5,780.00 $6,358.00

0097 EHD210 (6'9") Slasher - Adjustable Skids $5,990.00 $6,589.00

0089 EHD210 (6'9") Slasher - Adjustable Skids Offset $6,050.00 $6,655.00

0098 Wheel Kit suit EHD180 Slasher Solid Rubber Wheel $610.00 $671.00

0099 Wheel Kit suit EHD210 Slasher Solid Rubber Wheel $630.00 $693.00

0103 Warrior (5'10") Slasher - Adjustable Skids $7,400.00 $8,140.00

0105 Warrior (5'10") Slasher - Adjustable Skids Offset $7,460.00 $8,206.00

0100 Warrior (6'9") Slasher - Adjustable Skids $7,700.00 $8,470.00

0109 Warrior (6'9") Slasher - Adjustable Skids Offset $7,760.00 $8,536.00

0107 Wheel Kit suit Warrior (5'10") Slasher Solid Rubber Wheel $620.00 $682.00

0108 Wheel Kit suit Warrior (6'9") Slasher Solid Rubber Wheel $640.00 $704.00

11

Extra Heavy Duty & Warrior Slashers complete with all options The following slashers are the same models as previous complete with galvanised body, dual solid rubber wheelkits

and additional skid wear runners

0083 EHD180 (5'10") Slasher - contractor package $7,665.00 $8,431.50

0084 EHD210 (6'9") Slasher - contractor package $8,085.00 $8,893.50

0085 Warrior (5'10") Contractor Slasher - contractor package $9,450.00 $10,395.00

0086 Warrior (6'9") Contractor Slasher - contractor package $9,870.00 $10,857.00

SLASHERS - PASTURE TOPPERS Prod No. GST ex. GST inc.

0115 3.0m (10') 3 Point Linkage Pasture Topper - 45HP Gearbox $7,250.00 $7,975.00

0116 3.0m (10') 3 Point Linkage Pasture Topper - 75HP Gearbox $7,670.00 $8,437.00

0117 Wheel Kit suit 3.0m (10') Pasture Topper 2 Holden Castor Wheels $1,400.00 $1,540.00

0118 Hydraulic Ram & Hoses suit 10' Topper - in lieu of ratchet $640.00 $704.00

0119 Hydraulic Ram & Hoses suit 10' Topper - as spare part $720.00 $792.00

SLASHERS - TWIN ROTORAll twin rotor slashers are standard with front and rear chains.Prod No. GST ex. GST inc.

0101 2.4m (8') 3 PL Slasher 2 Solid Rubber Wheels $10,700.00 $11,770.00

0102 3.0m (10') Trailing Slasher 2 Holden Wheels $10,400.00 $11,440.00

0104 3.0m (10') 3PL Slasher 2 Solid Rubber Wheels $11,240.00 $12,364.00

0112 3.6m (12') Trailing Slasher 2 Holden Wheels $11,650.00 $12,815.00

0114 3.6m (12') 3PL Slasher 2 Solid Rubber Wheels $12,500.00 $13,750.00

0118 Hydraulic Ram & Hoses suit 10' & 12' Slasher - in lieu of ratchet $640.00 $704.00

0119 Hydraulic Ram & Hoses suit 10' & 12' Slasher - as spare part $720.00 $792.00

12

STICK RAKESThe following units have been designed to suit the Std/MD grader blades and are not suited for compact tractors

When ordering as a complete stick rake in this Grader blade style, a top and bottom needs to be ordered


0052 1.2m (4') Stick Rake (Bottom only) - 9 tines $730.00 $803.00



0044 2.3m (7'6") Stick Rake (Bottom only) - 15 tines $970.00 $1,067.00

0045 2.75m (9') Stick Rake (Bottom only) - 19 tines $1,120.00 $1,232.00

0046 3.2m (10'6") Stick Rake (Bottom only) - 21 tines $1,250.00 $1,375.00

0138 Fixed Top (no offset) sold separately $410.00 $451.00

0139 Offset Top (adjustable offset) sold separately $520.00 $572.00

The following units are for a complete stick rake (toolbar type headstock)

Please specify if the unit is for a compact tractor as lower linkage models are available

0337 1.2m (4') Stick Rake complete with toolbar linkage - 9 tines $950.00 $1,045.00

0338 1.5m (5') Stick Rake complete with toolbar linkage - 11 tines $1,030.00 $1,133.00


0342 2.3m (7'6") Stick Rake complete with toolbar linkage - 15 tines $1,250.00 $1,375.00


0344 3.2m (10'6") Stick Rake complete with toolbar linkage - 21 tines $1,550.00 $1,705.00

0346 3.65m (12') Stick Rake complete with heavier toolbar linkage - 23 tines $2,140.00 $2,354.00

0370 4.15m (13'6") Stick Rake complete with heavier toolbar linkage - 26 tines $2,310.00 $2,541.00

0347 Tool Bar Linkage Top Only $520.00 $572.00

0137 Stick Rake Wheelkit (Pair Pneumatic wheels) $420.00 $462.00

TOOLBAR EQUIPMENTProd No. GST ex. GST inc.

0598 Headstock (suit 2" square bar) complete with clamps/wedges $340.00 $374.00

0600 5' (1.5m) toolbar shaft (2"square) $120.00 $132.00

0601 6' (1.8m) toolbar shaft (2" square) $140.00 $154.00

0602 7' (2.1m) toolbar shaft (2" square) $170.00 $187.00

0599 Spreader bars & stays (inc. wedges) for creating a two row unit $400.00 $440.00

0551 Disc Hiller assembly (inc. disc/poles/clamp/wedge) - one unit $500.00 $550.00

0591 1 1/4" Rigid square tine $85.00 $93.50

0588 Clamp suit 1 1/4" square tine to 2" shaft $46.00 $50.60

0587 Wedge suit 1 1/4" square tine $26.00 $28.60

0589 12" furrower $90.00 $99.00

0590 15" furrower $102.00 $112.20

0605 2" reversible point $18.00 $19.80

0604 Plough bolt/nuts suit furrower (1 pair) $2.20 $2.42

Merbein Ploughs0520 2 disc merbein plough (one side only) $1,420.00 $1,562.00

0522 3 disc merbein plough (one side only) $1,960.00 $2,156.00

0536 Merbein rear coulter (one side only) $450.00 $495.00

Please specify left or right hand when ordering. Left hand throws the dirt to the left hand side & right hand throws to the right side.

0528 6' (1.8m) merbein toolbar $510.00 $561.00



TOW BALL LINKAGE HITCHProd No. GST ex. GST inc.

4024 Tow hitch suit Cat 1 Linkage $230.00 $253.00

13

JOHN BERENDS IMPLEMENTS Pty. Ltd. - Ararat Auto · 2020. 9. 7. · AERATORS - LINKAGE Prod No. GST...

Documents

Transcript of JOHN BERENDS IMPLEMENTS Pty. Ltd. - Ararat Auto · 2020. 9. 7. · AERATORS - LINKAGE Prod No. GST...