HITEC UNIVERSITY TAXILA CANTTDepartment of Mechanical Engineering

June 4, 2013To

The HODMEDHITEC University, Taxila Cantt

SUBJECT: Application for the post of Lab Engineer (Mechanical).

Respected Sir,

With due respect it is stated that I am a final year student (8 th Semester) of BS

Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree

would be complete in August 2013. I have been awarded with merit scholarship in all the seven

semesters and have also won different Engineering Competitions during my degree. I remained

prominent is extracurricular activities and I had an opportunity to attend internship in four

different industries in Pakistan, including two military industries and now looking for a job in your

esteemed organization to apply my skills of engineering.

My CV is attached herewith.

Thanking you in anticipation for consideration.

Regards,

_____________ Muhammad Khan(09-ME-086)8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt

June 15, 2013To

The HODMechanical Engg DeptWEC, Wah Cantt

SUBJECT: Application for the post of Lab Engineer (Mechanical).

Respected Sir,

With due respect it is stated that I am a final semester student (8 th Semester) of BS

Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree

would be complete in August 2013. My final year project is “Design and Manufacturing of Energy

Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded

by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the

seven semesters and have also won different Engineering Competitions during my degree. I

remained prominent is extracurricular activities and I had an opportunity to attend internship in

four different industries in Pakistan, including two renowned military industries.

Now I am looking for a job in your esteemed organization to apply my skills of

engineering. My CV is attached herewith.

Thanking you in anticipation for consideration.

Regards,

_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)

June 15, 2013To

The HODMechanical Engg DeptSMME, NUST Islamabad

SUBJECT: Application for the post of Lab Engineer (Mechanical).

Respected Sir,

With due respect it is stated that I am a final semester student (8 th Semester) of BS

Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree

would be complete in August 2013. My final year project is “Design and Manufacturing of Energy

Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded

by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the

seven semesters and have also won different Engineering Competitions during my degree. I

remained prominent is extracurricular activities and I had an opportunity to attend internship in

four different industries in Pakistan, including two renowned military industries.

Now I am looking for a job in your esteemed organization to apply my skills of

engineering. My CV is attached herewith.

Thanking you in anticipation for consideration.

Regards,

_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)

June 15, 2013To

The HODMechanical Engg DeptSwedish College, Wah Cantt

SUBJECT: Application for the post of Lab Engineer (Mechanical).

Respected Sir,

With due respect it is stated that I am a final semester student (8 th Semester) of BS

Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree

would be complete in August 2013. My final year project is “Design and Manufacturing of Energy

Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded

by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the

seven semesters and have also won different Engineering Competitions during my degree. I

remained prominent is extracurricular activities and I had an opportunity to attend internship in

four different industries in Pakistan, including two renowned military industries.

Now I am looking for a job in your esteemed organization to apply my skills of

engineering. My CV is attached herewith.

Thanking you in anticipation for consideration.

Regards,

_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)

June 15, 2013To

The DeanFMEGIKI, Sawabi

SUBJECT: Application for the post of Lab Engineer (Mechanical).

Respected Sir,

With due respect it is stated that I am a final semester student (8 th Semester) of BS

Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree

would be complete in August 2013. My final year project is “Design and Manufacturing of Energy

Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded

by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the

seven semesters and have also won different Engineering Competitions during my degree. I

remained prominent is extracurricular activities and I had an opportunity to attend internship in

four different industries in Pakistan, including two renowned military industries.

Now I am looking for a job in your esteemed organization to apply my skills of

engineering. My CV is attached herewith.

Thanking you in anticipation for consideration.

Regards,

_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)

June 15, 2013To

The HODMechanical Engg DeptIIUSE, Islamabad

SUBJECT: Application for the post of Lab Engineer (Mechanical).

Respected Sir,

With due respect it is stated that I am a final semester student (8 th Semester) of BS

Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree

would be complete in August 2013. My final year project is “Design and Manufacturing of Energy

Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded

by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the

seven semesters and have also won different Engineering Competitions during my degree. I

remained prominent is extracurricular activities and I had an opportunity to attend internship in

four different industries in Pakistan, including two renowned military industries.

Now I am looking for a job in your esteemed organization to apply my skills of

engineering. My CV is attached herewith.

Thanking you in anticipation for consideration.

Regards,

_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)

June 15, 2013To

The HR ManagerEco-PackHattar, KPK

SUBJECT: Application for the post of Engineer (Mechanical).

Respected Sir,

With due respect it is stated that I am a final semester student (8 th Semester) of BS

Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree

would be complete in August 2013. My final year project is “Design and Manufacturing of Energy

Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded

by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the

seven semesters and have also won different Engineering Competitions during my degree. I

remained prominent is extracurricular activities and I had an opportunity to attend internship in

four different industries in Pakistan, including two renowned military industries.

Now I am looking for a job in your esteemed organization to apply my skills of

engineering. My CV is attached herewith.

Thanking you in anticipation for consideration.

Regards,

_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)

June 15, 2013To

The HODMechanical Engg DeptCE&ME, Rawalpindi

SUBJECT: Application for the post of Lab Engineer (Mechanical).

Respected Sir,

With due respect it is stated that I am a final semester student (8 th Semester) of BS

Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree

would be complete in August 2013. My final year project is “Design and Manufacturing of Energy

Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded

by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the

seven semesters and have also won different Engineering Competitions during my degree. I

remained prominent is extracurricular activities and I had an opportunity to attend internship in

four different industries in Pakistan, including two renowned military industries.

Now I am looking for a job in your esteemed organization to apply my skills of

engineering. My CV is attached herewith.

Thanking you in anticipation for consideration.

Regards,

_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)

June 15, 2013To

The HOD Mechanical Engg DeptAir University, Islamabad

SUBJECT: Application for the post of Lab Engineer (Mechanical).

Respected Sir,

With due respect it is stated that I am a final semester student (8 th Semester) of BS

Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree

would be complete in August 2013. My final year project is “Design and Manufacturing of Energy

Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded

by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the

seven semesters and have also won different Engineering Competitions during my degree. I

remained prominent is extracurricular activities and I had an opportunity to attend internship in

four different industries in Pakistan, including two renowned military industries.

Now I am looking for a job in your esteemed organization to apply my skills of

engineering. My CV is attached herewith.

Thanking you in anticipation for consideration.

Regards,

_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)

June 15, 2013To

The HODMechanical Engg DeptBahria University, Islamabad

SUBJECT: Application for the post of Lab Engineer (Mechanical).

Respected Sir,

With due respect it is stated that I am a final semester student (8 th Semester) of BS

Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree

would be complete in August 2013. My final year project is “Design and Manufacturing of Energy

Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded

by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the

seven semesters and have also won different Engineering Competitions during my degree. I

remained prominent is extracurricular activities and I had an opportunity to attend internship in

four different industries in Pakistan, including two renowned military industries.

Now I am looking for a job in your esteemed organization to apply my skills of

engineering. My CV is attached herewith.

Thanking you in anticipation for consideration.

Regards,

_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)

June 15, 2013To

The HODMechanical Engg DeptIIUI

SUBJECT: Application for the post of Lab Engineer (Mechanical).

Respected Sir,

With due respect it is stated that I am a final semester student (8 th Semester) of BS

Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree

would be complete in August 2013. My final year project is “Design and Manufacturing of Energy

Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded

by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the

seven semesters and have also won different Engineering Competitions during my degree. I

remained prominent is extracurricular activities and I had an opportunity to attend internship in

four different industries in Pakistan, including two renowned military industries.

Now I am looking for a job in your esteemed organization to apply my skills of

engineering. My CV is attached herewith.

Thanking you in anticipation for consideration.

Regards,

_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)

June 15, 2013To

The HODMechanical Engg DeptCTTI, Islamabad

SUBJECT: Application for the post of Instructor (Mechanical).

Respected Sir,

With due respect it is stated that I am a final semester student (8 th Semester) of BS

Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree

would be complete in August 2013. My final year project is “Design and Manufacturing of Energy

Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded

by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the

seven semesters and have also won different Engineering Competitions during my degree. I

remained prominent is extracurricular activities and I had an opportunity to attend internship in

four different industries in Pakistan, including two renowned military industries.

Now I am looking for a job in your esteemed organization to apply my skills of

engineering. My CV is attached herewith.

Thanking you in anticipation for consideration.

Regards,

_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)

June 15, 2013To

The HR Manager Ghani Glass LtdHattar, KPK

SUBJECT: Application for the post of Engineer (Mechanical).

Respected Sir,

With due respect it is stated that I am a final semester student (8 th Semester) of BS

Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree

would be complete in August 2013. My final year project is “Design and Manufacturing of Energy

Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded

by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the

seven semesters and have also won different Engineering Competitions during my degree. I

remained prominent is extracurricular activities and I had an opportunity to attend internship in

four different industries in Pakistan, including two renowned military industries.

Now I am looking for a job in your esteemed organization to apply my skills of

engineering. My CV is attached herewith.

Thanking you in anticipation for consideration.

Regards,

_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)

June 15, 2013To

The HR Manager Cherat Packaging LtdSawat, KPK

SUBJECT: Application for the post of Engineer (Mechanical).

Respected Sir,

With due respect it is stated that I am a final semester student (8 th Semester) of BS

Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree

would be complete in August 2013. My final year project is “Design and Manufacturing of Energy

Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded

by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the

seven semesters and have also won different Engineering Competitions during my degree. I

remained prominent is extracurricular activities and I had an opportunity to attend internship in

four different industries in Pakistan, including two renowned military industries.

Now I am looking for a job in your esteemed organization to apply my skills of

engineering. My CV is attached herewith.

Thanking you in anticipation for consideration.

Regards,

_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)

June 15, 2013To

The HR ManagerTesla Industries Islamabad

SUBJECT: Application for the post of Engineer (Mechanical).

Respected Sir,

With due respect it is stated that I am a final semester student (8 th Semester) of BS

Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree

would be complete in August 2013. My final year project is “Design and Manufacturing of Energy

Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded

by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the

seven semesters and have also won different Engineering Competitions during my degree. I

remained prominent is extracurricular activities and I had an opportunity to attend internship in

four different industries in Pakistan, including two renowned military industries.

Now I am looking for a job in your esteemed organization to apply my skills of

engineering. My CV is attached herewith.

Thanking you in anticipation for consideration.

Regards,

_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)

June 15, 2013To

The HODMechanical Engg DeptMAJU, Islamabad

SUBJECT: Application for the post of Lab Engineer (Mechanical).

Respected Sir,

With due respect it is stated that I am a final semester student (8 th Semester) of BS

Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree

would be complete in August 2013. My final year project is “Design and Manufacturing of Energy

Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded

by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the

seven semesters and have also won different Engineering Competitions during my degree. I

remained prominent is extracurricular activities and I had an opportunity to attend internship in

four different industries in Pakistan, including two renowned military industries.

Now I am looking for a job in your esteemed organization to apply my skills of

engineering. My CV is attached herewith.

Thanking you in anticipation for consideration.

Regards,

_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)

June 15, 2013To

The HODMechatronics Engg DeptIIUSE, Islamabad

SUBJECT: Application for the post of Lab Engineer (Mechanical).

Respected Sir,

With due respect it is stated that I am a final semester student (8 th Semester) of BS

Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree

would be complete in August 2013. My final year project is “Design and Manufacturing of Energy

Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded

by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the

seven semesters and have also won different Engineering Competitions during my degree. I

remained prominent is extracurricular activities and I had an opportunity to attend internship in

four different industries in Pakistan, including two renowned military industries.

Now I am looking for a job in your esteemed organization to apply my skills of

engineering. My CV is attached herewith.

Thanking you in anticipation for consideration.

Regards,

_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)

June 15, 2013To

The HODMechanical Engg DeptIST, Islamabad

SUBJECT: Application for the post of Lab Engineer (Mechanical).

Respected Sir,

With due respect it is stated that I am a final semester student (8 th Semester) of BS

Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree

would be complete in August 2013. My final year project is “Design and Manufacturing of Energy

Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded

by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the

seven semesters and have also won different Engineering Competitions during my degree. I

remained prominent is extracurricular activities and I had an opportunity to attend internship in

four different industries in Pakistan, including two renowned military industries.

Now I am looking for a job in your esteemed organization to apply my skills of

engineering. My CV is attached herewith.

Thanking you in anticipation for consideration.

Regards,

_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)

June 15, 2013To

The HODMechanical Engg DeptIST, Islamabad

SUBJECT: Application for the post of Lab Engineer (Mechanical).

Respected Sir,

With due respect it is stated that I am a final semester student (8 th Semester) of BS

Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree

would be complete in August 2013. My final year project is “Design and Manufacturing of Energy

Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded

by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the

seven semesters and have also won different Engineering Competitions during my degree. I

remained prominent is extracurricular activities and I had an opportunity to attend internship in

four different industries in Pakistan, including two renowned military industries.

Now I am looking for a job in your esteemed organization to apply my skills of

engineering. My CV is attached herewith.

Thanking you in anticipation for consideration.

Regards,

_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)

June 17, 2013

The HODMechanical Engineering DepartmentHITEC University, Taxila Cantt

SUBJECT: Application for the post of Lab Engineer.

Respected Sir,

With due respect it is stated that I am a student of final year of BS Mechanical

Engineering at HITEC University, Taxila, my current CGPA is 3.28 and my degree would be

complete in August 2013. I have participated and won different Engineering Competitions during

my degree. I am looking for a job in your respected organization to apply my skills of engineering.

My CV is attached herewith.

Thanking you in a hope for consideration.

Regards,

_____________ Hafiz kaleem Ullah(09-ME-038)8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt

June 17, 2013

The HODMechanical Engineering DepartmentHITEC University, Taxila Cantt

SUBJECT: Application for the post of Lab Engineer.

Respected Sir,

With due respect it is stated that I am a student of final year of BS Mechanical

Engineering at HITEC University, Taxila, my current CGPA is 2.55 and my degree would be

complete in August 2013. I have participated in different technical Competitions and did research

work during my degree. I am looking for a job in your admired organization to apply my skills of

engineering. My CV is attached herewith.

Thanking you in a hope for consideration.

Regards,

_____________ Saboor Ahmad (09-ME-0116)8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt