JINGTONG HYDROHILIC STRIP IN CONSTRUCTION WATERPROOF
-
Upload
hengshui-jingtong-rubber-coltd -
Category
Engineering
-
view
121 -
download
2
Transcript of JINGTONG HYDROHILIC STRIP IN CONSTRUCTION WATERPROOF
Hengshui JingTong Engineering Rubber Co.,LtDNanwangzhuangVillage,Taocheng District,Hengshui City,Hebei,China.
Mob.86-15731809416 Tel/Fax: [email protected] Or [email protected]
Water Swelling Bentonite Strip
一、PN Type Water Swelling Bentonite strip
Cross section of water stop respectively including 12*12、15*15、10*20、15*20、20*30、20*50、50*50(mm)etc.
Hengshui JingTong Engineering Rubber Co.,LtDNanwangzhuangVillage,Taocheng District,Hengshui City,Hebei,China.
Mob.86-15731809416 Tel/Fax: [email protected] Or [email protected]
●Technical performance indexNo. Item Index
PN-150 PN-220 PN-3001 Volume expansion ratio % ≥ 150 220 3002 Flow at high temperature
(80℃×5h)No flow No No
3 low temperature compressiontest (-20℃×2h)
Noembrittlement
No No
Inspection results should indicate the test method
二、PZ Type Water Swelling Bentonite Strip
Water swelling expansion water stop is a new type of water stop check ofaquatic products, it passes through vulcanization molding, but different fromgeneral rubber products,It be with excellent resilience, extensibilitycharacteristics and elastic seal water function. It can be water swelling, withwater to water stop, affection of it to make it more reliable than ordinarywaterproof materials.
Hengshui JingTong Engineering Rubber Co.,LtDNanwangzhuangVillage,Taocheng District,Hengshui City,Hebei,China.
Mob.86-15731809416 Tel/Fax: [email protected] Or [email protected]
●Technical performance index
No. ItemIndex
PZ-150 PZ-250 PZ-400 PZ-6001 Hardness(Shore A) 42±7 45±7 48±72 Tensile Strength/ Mpa ≥ 3.5 3
3 Elongation at break/%≥ 450 3504 Volume expansion ratio% ≥ 150 250 400 600
5Tensile Strength/ Mpa ≥ 3 2Elongation at break/%≥ 350 250
Volume expansion ratio % ≥ 150 250 300 500
6 Fold ability at low temperature(-20℃×2h)
No Crack
Note:1. Hardness is recommended.2. The finished product cut in section testing should reach to 80% of thisstandard.
3. Tensile Strength of the joint part do not lower than 50% of standardperformance.
一、Company Information
二、
三、Package Detail
(1) 5m-6m in a roll,30m packed in a small carton(2) According to customer’s requirement is acceptable.
Hengshui JingTong Engineering Rubber Co.,LtDNanwangzhuangVillage,Taocheng District,Hengshui City,Hebei,China.
Mob.86-15731809416 Tel/Fax: [email protected] Or [email protected]
Hengshui JingTong Engineering Rubber Co.,LtDNanwangzhuangVillage,Taocheng District,Hengshui City,Hebei,China.
Mob.86-15731809416 Tel/Fax: [email protected] Or [email protected]
四、Company Information: