JHD12864E

JHD12864E

LCD MOUDULE SPECIFICATION FOR APPROVAL

4PAGE

1.0VER.

10/12/03DATEJHDELECTRONICS

•Display construction……………•Display mode ………………………•Display type ………………………•Backlight……………………………•Viewing direction…………………•Operating temperature……………•Driving voltage……………………•Driving method………………………•Type……………………………………•Number of data line………………•Connector……………………………

128*64 DOTSSTN / Yellow GreenPositive TranflectiveLED(Y/G)/5.0V6 o’clockIndoorSingle power1/64 duty, 1/9 biasCOB (Chip On Board)8-bit parallelPin

gAbout 50Weight

mm2.7Diameter of mounting hole

mm-0.52 0.52 Pitch

mm-0.48 0.48 SizeDot

mm-38.8 70.7 Viewing area

mm14.0(MAX)70.0 93.0 Module size

UNITTHICKNESSHEIGHTWIDTHITEM

1. FEATURES

2. MECHANICAL DATA

JHD12864E


5PAGE

1.0VER.


3. ABSOLUTE MAXIMUM RATINGS

4. ELECTRICAL CHARACTERISTICS

JHD12864E


6PAGE

1.0VER.


5. ELECTRO-OPTICAL CHARACTERISTICS

θ

θ

∅ ∅Top

Bottom

Left R ight

V iewing Surface

TopViewing Angle

View ing AngleBottom

Please select either top or bottom viewing angle

Note 3: Definition of Viewing Angle

Note 1: Definition of Contrast Ratio “K”

Note 2: Definition of OpticalResponse Time

K=

10%

90%Brightness Curve ofselected area

Brightness Curve ofnon-selected area

Vop Driving Voltage

Brig

htne

ss

Brightness of non-selected segment(A)

A

B

Brightness of selected segment(B)

Non-selected Selected Non-selected

100%

0%Brightness 90%

10%

Rise Time Fall Time

-30 -- +30θ3deg.

-40 -- +40K ≥1.4

φViewing angle

2ms-

130φ=2TfResponse time (fall)

2ms-

130-

φ=1TrResponse time (rise)

1--41.4φ=0KContrast ratio

NOTEUNITMAX.TYP.MIN.CONDITIONSYMBOLITEM

JHD12864E


7PAGE

1.0VER.


6. QC/QA PROCEDURE

Parts QA Dept. LCD Mfg. Dept. LCM QA Dept.Parts

Soldering

Soldering Inspection

Parts AcceptanceInspection

LCM Assembling

High Temp. Test

Heat Cycle Aging

Inspection

Storage/Shipping

Outgoing Inspection

Packaging

1. Function & Appearance &Dimension: Sample Test

2. Reliability: Random Sampling

Soldering Condition

1. Dimension: Sample Test2. Function: 100% Inspection

-10~70℃ (1 Cycle=6 Hrs).2 Cycle: 100% Inspection

Function & Appearance:100% Inspection (ex. 50℃)

1. Function & Appearance:100% Inspection

2. Dimension: Random Sampling

Package Condition & Label:100% Inspection

1. Function,Appearance &Dimension: Random Sampling2. Package Product & Label:

Random Sampling3.Electro-optical Characteristic:

100% Inspection4. Reliability: Random Sampling

JHD12864E


8PAGE

1.0VER.


•Operating life time:Longer than 50000 hours (at room temperature without direct irradiation of sunlight)

•Reliability Characteristics:

1.Operating time: Thirty minutes exposure in each direction (x, y, z)2.Sweep Frequency (1min):10Hz→ 55Hz →10Hz3.Amplitude: 0.75mm double amplitude

Vibration

-20℃→25℃→70℃→25℃ /5 Cycles (30min) (5min) (30min) (5min)

Thermal shock

40℃ * 90%RH / 200 HrsHigh humidity

-20℃ / 200 HrsLow temp.

Total current consumption should be below double of initial valueContrast ratio

should be within initial value±50%No defect in

cosmetic and operational function is allowable

70℃ / 200 HrsHigh temp

CriterionTestItem

7. RELIABILITY

JHD12864E


9PAGE

1.0VER.


8. BLOCK DIAGRAM

9. POWER SUPPLY

JHD12864E


10PAGE

1.0VER.


• WRITE OPERATION

• READ OPERATION

10. TIMING DIAGRAM

JHD12864E


11PAGE

1.0VER.


11. AC CHARACTERISTICS

JHD12864E


12PAGE

1.0VER.


12. INSTRUCTION SET

JHD12864E


13PAGE

1.0VER.


13. Handling Precautions1. Limitation of Application:Optrex products are designed for use in ordinary electronic devices such as business machines, telecommunications equipment,measurement devices and etc. Please handle the products with care. (see below)Optrex products are not designed,intended ,or authorized for use in any application which the failure of the product couldresult in a situation where personal injury or death may occur . these applications include, but are not limited to . life-sustaining equipment,nuclear control devices , aerospace equipment , devices related to hazardous or flammable materials , etc.[If Buyer intends to purchase or use the Optrex Products for such unintended or unauthorized applications , Buyer must secure priorwritten consent to such use by a responsible officer of Optrex Corporation.]Should Buyer purchase or use Optrex Products for any such unintended or unauthorized application [ without such consent ].Buyer shall indemnify and hold Optrex and its officers.employees. subsidiaries, affiliates and distributors harmless against all claims, costs, damages and expenses , and reasonableattorney’s fees,arising out of , directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Optrex was negligent regarding the design or manufacture of the part.2.Industrial Rights and Patents Optrex shall not be responsible for any infringement of industrial property rights of third parties in any country arising out of theapplication or use of Optrex products, except which directly concern the structure or production of such products.

If pressure to LCD, orientation may be disturbed.

LCD will broken by shock!

Liquid Crystal may be leaked when display is broked.

If it accidentally gets your hands,wash then with water!

No Press and Shock! Don’t Swallow or Touch Liquid Crystal!

Don’t not Scratch! No DC Voltage to LCD!

Polarizer is a soft material and can easily be scratched.

DC

No!

DC volrage or driveing higherthan the specified voltagewill reduce the lifetime ofthe LCD.

JHD12864E


14PAGE

1.0VER.


be reshaped, which willconductive rubber may

LCD may be shifted or

cause defects.

Pressure on the metallic frame and PCB may deformthe conductive rubber or break the liquid crystalcell and back light, whichwill cause defects.

Don’t Press the Metallic Frame and Disassemblethe LCM

Avoid static electricity.

Slowly Peel Off Protective Film!

Please be sure to groundhuman body and electricapploances during work.

It is preferable to useconductive mat on tableand wear cotton clothesor conduction processedfiber. Synthetic fiber isnot recommended.

Avoid Static Electricity! Wear Gloves While Handing!

LCD deteriorates.

Keep Away From Extreme Heat and Humidity!

When attaching with theheat seal or anisontropicallyconductive film, wipe offwith alcohol before use.

Alcohol

Use Alcohol to Clean Terminals!

GLOVE

It is preferable to wear glovesto avoid damaging the LCD.

Please do not touch electrodeswith bare hands or makethem dirty.

JHD12864E


15PAGE

1.0VER.


Note that the presence ofwaterdrops or dew in theLCD panel may deteriorate the polarizer or corradeelectrode.

Don’t Drop Water on LCD!

Precaution in Soldering LCD Module

Basic instructions: Solder I/O terminals only.Use soldering iron without leakage.(1)Soldering condition to I/O terminals

Temperature at tip of the iron: 280±10℃Soldering time: 3~4 sec.Type of solder: Eutectic solder (containing colophony-flux)*Please do not use flux because it may soak into LCD Module or contaminate it.*It is preferable to peel off protective film on display surface after soldering I/Oterminals is finished.

(2)Remove connector or cable*When you remove connector or cable soldered to I/O terminals, please confirm that solder is fully melted. If you remove by force, electrodes at I/O terminals maybe damaged(or stripped off).*It is recommended to use solder suction machine.

Long-term Storage

If it is necessary to store LCD modules for a long time, please comply with thefollowing procedures.If storage condition is not satisfactory, display(especially polarizer) may be deterioratedor soldering I/O terminals may become difficult(some oxide is generated at I/Oterminals plating).1.Store as delivered by Optrex2.If you store as unpacked,put in anti-static bag,seal its opening and store where it isnot subjected to direct sunshine nor fluorescent lamp.

3.Store at temperature 0 to +35℃ and at low humidity.Please refer to our specificationsheets for storage temperature range and humidity condition.

Long-term StoragePlease use power supply with built-in surge protection circuit.

JHD12864E


16PAGE

1.0VER.


14. EXTERNAL DIMENSION

1 2 3 4 5 6 7 8 9 10VSS VDD V0 D/I R/W E DB0 DB1 DB2 DB3

11 12 13 14 15 16 17 18 19 20DB4 DB5 DB6 DB7 CS1 CS2 RST VEE LED+ LED-

JHD12864E


17PAGE

1.0VER.


15. INTERFACEPIN NO. SYMBOL DESCRIPTION FUNCTION

1 VSS GROUND 0V (GND)

2 VDD POWER SUPPLY FOR LOGICCIRCUIT +5V

3 V0 LCD CONTRASTADJUSTMENT

4 RS INSTRUCTION/DATAREGISTER SELECTION

RS = 0 : INSTRUCTION REGISTERRS = 1 : DATA REGISTER

5 R/W READ/WRITE SELECTION R/W = 0 : REGISTER WRITER/W = 1 : REGISTER READ

6 E ENABLE SIGNAL7 DB08 DB19 DB2 10 DB3 8 BIT: DB0-DB711 DB412 DB513 DB614 DB7

15 CS1 CHIP SELECTION CS1=1,CHIP SELECT SIGNAL FORIC1

16 CS2 CHIP SELECTION CS2=1,CHIP SELECT SIGNAL FORIC2

17 RST RESET SIGNAL RSTB=0,DISPLAY OFF,DISPLAYFROM LINE 0.

18 VEE NEGATIVE VOLTAGE FORLCD DRIVING

-10V

19 LED+ SUPPLY VOLTAGE FORLED+ +5V

20 LED- SUPPLY VOLTAGE FOR LED- 0V

DATA INPUT/OUTPUT LINES

JHD12864E

Documents

Transcript of JHD12864E