Język angielski w laboratorium -...
Transcript of Język angielski w laboratorium -...
2015-12-07
10
Petri dish and watch glass
filtering flasks Pear-shaped flasks Round-bottom flask
Three-neck
Round-bottom flask with septum-inlet angled parallel
2015-12-07
11
Four-Neck Angled Round-Bottom Flask
Three-Neck Vertical Round-Bottom Flask
Three-Neck Angled Round-Bottom Flask
Two-neck Angled Round-Bottom
Flask
Two-neck Vertical Round-Bottom Flask
Round Flat-Bottom Flasks
Volumetric Flasks
2015-12-07
13
The longer, tapered plug design of Precision Seal septa fits
standard taper joints precisely providing a sealing surface
that is 50 to 80% higher than standard sleeve stoppers.
The inner seal design of Precision Seal septa minimizes
chemical and solvent vapor migration up the joint to the
sleeve which can swell, leak, or fail from exposure. The
surface texture of the rubber is similar to that of a ground
glass joint and resists movement once seated.
Precision Seals are made using a certified natural rubber
formulation for superior resealability during use.
SAFETY ADVICE—The Precision Seal flexible sleeve must be secured to the glass joint
with a Wrap-It Tie or similar device during cannulation and for applications that involve
pressure. DO NOT rely on the sleeve alone to anchor the septum. This rule applies to all
types of rubber septa that are used for critical applications.
2015-12-07
15
Condensers
distillation reflux condensation
triple-jacket coil condenser
cold finger condenser dry ice condenser
The Allihn condenser or bulb condenser REFLUX condenser
2015-12-07
17
Crucibles and other porcelain equipment
cavity plate spot reaction plate spotting plate
casserole
Crucibles and other porcelain equipment
spatula with spoon scraper
2015-12-07
21
Metal equipment
clamp holder
lab stand support stand
Metal equipment
support rings
tripod
2015-12-07
22
rubber/cork support rings
Dropping bottle with graduated dropper
Mini gas bubbler
Splash-guard adapters
Soxhlet extraction apparatus