Jeopardy
description
Transcript of Jeopardy
Choose a category. You will be given the question.
You must give the correct answer. If wrong, click the yellow icon.
To return to the Jeopardy categories, click the “home” button.
Click to begin.
Click here for Final Jeopardy
Category B Category D Category E
10 Point
20 Points
30 Points
40 Points
50 Points
10 Point 10 Point 10 Point 10 Point
20 Points 20 Points 20 Points 20 Points
30 Points
40 Points
50 Points
30 Points 30 Points 30 Points
40 Points 40 Points 40 Points
50 Points 50 Points 50 Points
Category CCategory A
Which of the following is able to convert all the thermal energy produced into useful work?
nuclear power reactor
gasoline engine
stovetop range
none of the above
none of the above
Not close!
Heat will transfer from a high temperature area to a low temperature area by several different methods. The
heat transferred by an electric stovetop coil to the teakettle is an example of transfer by
convection
combustion
radiation
conduction
conduction
If you thought that you were wrong,
you are right!
Energy is not destroyed, but rather converted from one form to another. Describe the conversion of energy in
the following process: A power reactor utilizes the process of uranium fission to create electricity.
nuclear to electrical
nuclear to thermal to electrical
nuclear to mechanical to thermal to electrical
nuclear to thermal to mechanical to electrical
nuclear to thermal to electrical
STOP!
Sound waves are examples of what category of wave?
A.longitudinal
B. transverse
C. mechanical
both A and C
both A and C
60 g of KCLO3 is added to a beaker of boiling water until no more will dissolve. As the solution cools to 30 degrees,
50 grams of KCLO3 stays in solution.
50 grams of KCLO3 comes out of solution.
10 grams of KCLO3 comes out of solution.
KCLO3 will crystallize at this temperature.
50 grams of KCLO3 comes out of solution..
Laura navigates her kayak down a stretch of the Neuse River in 15 minutes. Her rate of speed over the course of
the trip is 8 km/hr. How far has she traveled?
0.12 km
1.2 km
2 km
120 km
2 km
Sound waves cause molecules to vibrate and bump into one another. For sound to travel, there must be molecules
which can be made to vibrate. The closer together the molecules are, the faster the sound is able to travel. This
explains why
Sound travels faster in steel than in water.
Sound travels faster in outer space than in air.
Sound travels faster in air than in water.
Sound travels faster in water than in steel.
Sound travels faster in steel than in water.
A submarine uses sonar to measure the distance between itself and other underwater objects. It sends out a sound wave, then records the echo that is reflected back by an underwater object. The speed of sound in water is about 1500 m/s. How far away is an object whose echo takes 5
seconds to return?
300 meters
7500 meters
3750 meters
15000 meters
7500 meters
Which of the following examples represents potential energy but not kinetic energy?
An avalanche
A coiled spring
A hot air balloon in flight
The pistons in a working engine
A coiled spring
Find the amount of work done when 30 N of force is used to lift a box 400 cm.
7.5 Joules
13.3 Joules
120 Joules
12000 Joules
120 Joules
When two light nuclei are forced to fuse, they form a heavier nucleus. During this process, a large amount of energy is produced. When the process is conducted at room temperatures and standard pressures, it is called cold fusion. In 1989, Stanley Pons and Martin Fleischmann announced at a press conference that they has produced cold fusion one time in their laboratory. All over the world, scientists rushed to their labs to try and duplicate the experiment. In the end, no one was successful. Pons and Fleischmann were harshly criticized in the science community for their premature announcement. What would have been the appropriate tool of communication for Pons and Fleischmann to share how they performed the experiment and the results they achieved?
newspaper and television
high school textbooks and workbooks
scientific journals
a podcast
scientific journals
Too bad!
Deuterium (H-2) is a common product of the fusion process. Which of the following atoms could undergo fusion to become deuterium?
Li and H
He and H
H and H
H and a neutron
A 12 N force is required to move a box 6 meters across a gravel driveway. How
much work has been done?
exactly 72 J
exactly 2 J
more than 72 J
between 2 and 72 J
more than 72 J
The speed of an object increases 12 m/s over 3 seconds. What is its acceleration?
9 m/s2
4 m/s2
3 m/s2
36 m/s2
4 m/s2
Tammy's room contains a lamp, a hair dryer, a radio and a TV. She uses an
ohmmeter to determine that the overall resistance of the circuit increases as she
plugs each appliance in. What kind of wiring is the circuitry in Tammy's house?
series
parallel
mixed
direct
series
How is the electron cloud model an improvement on Niels Bohr's model of the atom?
The electron cloud model accounts for the location of the nucleus.
The electron cloud model assigns electrons to orbital areas, rather than fixed orbits.
The electron cloud model assigns electrons to fixed orbits, rather than orbital areas.
The electron cloud model accounts for the mass and density of the nucleus.
The electron cloud model assigns
electrons to orbital areas, rather than
fixed orbits
Sodium has a violent exothermic reaction with water, producing hydrogen gas and a clear,
aqueous sodium hydroxide solution. What else is produced in this reaction?
gamma rays
heat
ice
electricity
Heat
The speed of an object increases by 30 m/s in 10 seconds. What is its acceleration?
300 m/s2
20 m/s2
3 m/s2
0.33 m/s2
3 m/s2
Which of the following best explains the difference between melting and boiling points?
The melting point is the temperature at which a gas becomes plasma. The boiling point is the temperature at which a gas becomes a liquid.
The boiling point is the temperature at which a liquid becomes a gas. The melting point is the temperature at which a solid becomes a liquid.
The melting point is the temperature at which a liquid becomes a gas. The boiling point is the temperature at which a solid becomes a liquid.
The boiling point is the temperature at which a solid becomes a gas. The melting point is the temperature at which a gas becomes a liquid.
The boiling point is the temperature at which a liquid
becomes a gas. The melting point is the temperature at which a
solid becomes a liquid.
Marla uses a triple beam balance to mass her sample. Tim uses an analytical balance to mass
his sample. Reisa uses water displacement to obtain the mass of her sample. Which student
should perform his massing operation the most times, in order to ensure a reproducible result?
Marla
Tim
Reisa
Each student should perform his massing operation at least 10 times to assure reproducibility.
Reisa
Jill places a message in a bottle and drops it off the side of a mountain, into the ocean. When does the bottles have the greatest
kinetic energy?
when Jill holds the bottle in her hand, just before dropping it
just after Jill releases the bottle
just before the bottles hits the surface of the water
when it is floating on the water
just before the bottles hits the surface of the water
NOT CLOSE!
Shaquille has two test tubes full of water. He boils the water in Test Tube A. He adds
green food coloring to the water in Test Tube B. In which test tube did a chemical
change take place?
Test Tube A
Test Tube B
in both test tubes
in neither test tube
in neither test tube
A chemist has two magnesium (Mg) samples. One is a small, solid block. The other is a vial of powdered
magnesium. He adds the small block of Mg to a water sample. Small bubbles slowly begin to form at the surface
of the block. What will happen to the powdered Mg sample if the chemist adds it to a separate beaker of
water?The powdered Mg sample will disappear.
The powdered Mg sample will change color.
The powdered Mg sample will bubble much more slowly than the solid sample did.
The powdered Mg sample will bubble much more quickly than the solid sample did.
The powdered Mg sample will bubble much more quickly than
the solid sample did.
Martina has three stoppered test tubes, each containing a different clear liquid. One is rubbing alcohol, one is water
and one is corn syrup. What would be the best way for Martina to determine which one was rubbing alcohol?
Look at all three samples under the microscope.
Remove stopper on the test tube and waft the scent of the chemical toward her nose.
Ignite all three samples.
Place the unknown liquid in test tubes with unknown metals and observe the reaction.
Remove stopper on the test tube and waft the scent of the
chemical toward her nose.
Which of the following questions can be answered through scientific
investigation?
Why does sugar taste better than salt?
Has the yearly rainfall decreased this year?
Why do robins prefer to eat worms over seeds?
Which precious metal makes the best jewelry?
Has the yearly rainfall decreased this year?
Make your wager
The best explanation for the pH of pure water being higher than rain
water is rain water contains:
water products from animals and humans.
air pollutants that are acidic.
salts that lower the pH.
salts that increase the pH.
air pollutants that are acidic.