JDSU LTE End to End Testing

JDSU LTE Network End-to-End Test Solutions

Communications Test and Measurement Solutions

2

Introduction .................................................................................................................................... 3

E6474A Drive Test — LTE Network Wireless Optimization ........................................... 4W1314A measurements ................................................................................................................. 4Chipset measurements ................................................................................................................. 5E6474 tests ........................................................................................................................................ 6Leading platform functions ......................................................................................................... 7

SART/DNA LTE Distributed Network Analyzer .................................................................. 7Hardware functions ........................................................................................................................ 8Protocol decoding .......................................................................................................................... 8Call tracking ...................................................................................................................................... 8KPI statistical analysis ..................................................................................................................... 8Application scenarios ..................................................................................................................... 9

JD745A Base Station Analyzer ................................................................................................ 10Spectrum analyzer .......................................................................................................................... 10LTE transmitter analysis ................................................................................................................. 11Monitored LTE interfaces and protocols .................................................................................. 13

acceSSLTE Network and Service Assurance System ........................................................ 13Real-time (KPI Alarm) Monitoring .............................................................................................. 14Real-time/historical fault troubleshooting .............................................................................. 14 Application scenarios ..................................................................................................................... 15

PacketInsight .................................................................................................................................. 16

T-BERD 6000A & 8000 Multi-Service Application Module (MSAM) .......................... 17

T-BERD 5800 Handheld Network Test Family of Products ............................................ 18

SmartClass Ethernet .................................................................................................................... 19

Fiber Inspection, Cleaning and Test Solutions .................................................................. 19

Power Measurement and Fiber Identification Solutions .............................................. 20

OTDR and Optical Power Measurement Solutions .......................................................... 20

Table of Contents

3

Introduction

LTE is transforming wireless and core networks and network transmission. OFDM and MIMO are being introduced as over-the-air interfaces, while PTN’s development for mobile backhaul and all-IP network architecture and high-speed data transmission presents huge challenges and opportunities to broader appli-cations of the LTE network. JDSU offers the industry’s most advanced and most comprehensive test and measurement technology solutions for various stages of LTE research and development, testing, deployment, and optimization by operators and network equipment manufacturers.

Network topology and JDSU LTE test tools

Drive Test

HST-3000

PacketInsight

T-BERD

PacketInsight

4

The JDSU drive test solution lets operators and network equipment manufac-turers efficiently deploy and optimize today’s increasingly complex wireless voice and data networks by conducting optimization and troubleshooting on FDD-LTE FDD-LTE and TD-LTE networks. The E6474A drive test platform supports scanner (JDSU multi-band, multi-technology receiver W1314A) and user equipment (UE) measurements, and is the leading tool kit for optimization and network troubleshooting.

Features • Supports simultaneous testing of user equipment (UE) and the measurement

receiver (scanner)• Asinglelaptopcansupportuptoeightdevices• Supportsindustry-leadingdatatestsuchasIperf,FTP,VideoStreaming,andVOIP• Worksindoorsusingahandsetorbackpack• Correlatesreal-timetestparametersandthebasestation• Userscandefineeventtriggers• Fast,accuratereceiver(scanner)measurements• Data records can be imported to the JDSU signaling analyzer for end-to-end

protocol tracking• FullysupportstraditionaltechnologiessuchasGSM,TD-SCDMA/UMTS/HSPA+,andcdma2000/EVDO

W1314A measurements• JDSUreceiverssupportallFDD-LTEandTDD-LTEfrequencybands• Supportedfrequencies:700/850/900/1700/1800/1900MHz;2.1/2.3/2.5/2.6/3.5GHz• LTEmeasurementbandwidths:1.4/3/5/10/15/20MHz• Frequencymeasurement• Channelpowermeasurement• Continuous-wavemeasurement• PrimaryandsecondarysynchronizationsignalRSSI(P-SS)andRSSI(S-SS)• PhysicallayercellID(PID)[0,503]• Referencesignalreceivedpower(RSRP)forantennaports0and1,referencesignalreceivedquality(RSRQ)andCINR/SINR(RS-CINR)

It can also be used on network frequency sweeping to identify problems that need to be corrected in the network planning transmission model.

E6474A Drive Test — LTE Network Wireless Optimization

5

Chipset measurements JDSUcurrentlysupportsthefollowingUEchipsets:Qualcomm,Samsung,LG,andAltair.QualcommandAltairchipsetscanconductTD-LTEmeasurements,and measure the following parameters.

Cellandrandomaccessinformation:

• LTE3GPPcellinformation• LTEphysicalcellinformation• LTEcellsignalqualityinformation• LTECQIinformation• LTEPBCHBLER• LTEpathinformation• LTERACHrequest• LTERACHresponse• LTEQCIinformation

Informationonphysicallysharedchannels:

• LTEPDSCHBLER• LTEPDSCHphysicallayerthroughput• LTEPUSCHphysicallayerthroughput• LTEPDCCHDCIDetectionVer

Mobileinformation:

• LTEantennacorrelation• LTElaunchpower• RLC/MAC/PDCPinformation• LTERLCDLthroughput• LTERLCULthroughput• LTEMACBLER• LTEMACthroughput• LTEMACDLPDU• LTEMACULPDU• LTEPDCPDLthroughput• LTEPDCPULthroughput• LTEPDCPPDU

Schedulerinformation:

• LTEULGrantandDLAck/Nack• LTEULSchedulerstatus• LTEULControlinformation

Protocolinformationlog:

• RLCProtocolmessages• NASProtocolmessages

6

E6474 tests TheE6474AdrivetestplatformcanalsoconductUEbasedtests,including:

• Iperftest• FTPtest• VideoStreamingwithMOS• VOIPtest• Ping,HTTPtest,etc.By customizing test sequences, it can pre-set the sequence, frequency, timeinterval and measurement parameters of test items. Using the E6474A platform, test results (such as throughput, latency, bandwidth, jitter, etc.) and real-time statistics can automatically be displayed graphically.

The LTE receiver solution supports FDD-LTE and TD-LTE technologies. You can select one or both options based on your measurement needs.

Ordering Information

Drive Test Network Optimization Platform Options Order Number

Basic options (supporting basic application testing such as Iperf, FTP and Ping) E6474AFDDLTE receiver measurement E6474A-645 TD-LTE receiver measurement E6474A-646 Receiver hardware W1314AIndoor map license E6474A-030

MapX indoor map license E6474A-040 One year software and support update service (SUS) E6474A-060LTE UE Measurements (default support for Qualcomm FDD LTE and TDD LTE equipment) E6474A-640LTE UE measurement equipment updated to LG device E6474A-641LTE UE measurement equipment updated to Samsung device E6474A-642LTE UE measurement equipment updated to Altair device E6474A-643LTE UE measurement equipment updated to Sequans device E6474A-644 LTE UE measurement equipment updated to Hi Silicon TDD device E6474A-634Wireless Application Measurement Series (such as adhesion,activation, WAP, HTTP, Web, SMTP, POP3, etc.)

E6474A-740

MOS measurement of streaming video E6474A-744 VOIP UE end measurement B9990A-510VOIP Application server options B9990A-515 Drive Test Backpack with USB hub E6473B-920Drive Test Backpack E6473B-921Drive Test Battery Pack for Backpack E6473B-925Drive Test Battery Charger for Backpack E6473B-926

7

The industry’s leading end to end LTE network test platform, able to analyze and associate interface protocol signaling messages for a variety of network tech-nologies, and provide the test industry’s most complete real-time monitoring, network diagnostics and troubleshooting. SART for LTE is a comprehensiveextension of the platform, covering almost all of the mobile networks including GSM,WCDMA,HSPA,TD-SCDMA,CDMA2000,EVDO,andIMS.

Features• Useshigh-performanceGEand10GEinterfacecardtocapturewire-speedof

network data• Supportsthelatestandmostcompleteprotocols• Sameplatformtocompleteendtoendcalltrackingandfaultlocationfor2G,3G,andLTEnetworks

• LTEnetworkoptimizationanduserplanedataanalysis

Leading platform functions • Thesameplatformsupports2G,3G,andLTE/SAE/IMSprotocolanalysis,andsupportsthefollowinginterfaces:

– LTE&EPCincludesuu,S1,X2,S5/S8(GTPV2&PMIP),S6a,S10,S11,S13,SGi,Rx,Gx,andGxc

– 3GPPinterworkingincludesS3,S4,S6d,S12,andS16 – Non-3GPPinterworkingincludesS2a(PMIP),S2b,S2c,S101,S102,andS103 – OthersincludevGxa,SWa,SWd,SWm,SWx,STa,S6b,Ro,Rf(Gz),andGy – LTEVoice:

o VoGAL;Z1,Z3 o SRVCC:Sv o CSFB:SGs o IMS:Mw/ISC/Dx/Cx/Sh

• Multi-userserverusagepatterns,onesetofhardwarecanbesharedbymanyfor parallel testing

SART/DNA LTE Distributed Network Analyzer

GB/10GB Ethernet Analysis Server

Signaling Analyzer Real-Time/ Distributed Network Analyzer

8

• Supportsmulti-interface,multi-protocolautomaticconfigurations

Hardware functions High-performancehardwareensurestestaccuracywith:

• Optionsforhigh-density(8portsor16ports)orportable(dualport)Gigabitcapture ports

• Supports10GEGigabitEthernetinterface(opticalandelectricalinterfaces)• Supports association test of over the air monitoring instruments (such as

Sanjole and WaveJudge)• Supports hardware-based IP signaling messages filtering and data packet

intelligent processing

Protocol decoding Fullysupportsallversionsof3GPPR8andinterfaceprotocols:

• Supportsprotocolsinvariousversionssuchas3GPPR82008/2008-03/2008-06/2008-09/2008-12/2009-03/2009-06/2009-09/2009-12andR92010-03/2010-06/2010-09/2010-12.

• SupportsLTENASsignalingdecryptiontestandcanautomaticallygetthekeyfrom the adjacent interfaces for real-time decryption of the signaling

• SupportsLTEandTD-SCDMA/GSMaswellasUMTSnetworkinteroperabil-ity testing

• SupportsinteroperabilitytestingbetweenLTEnetworks• IncludessupportforIPV6andIPSec• Supports real-time decoding and post-analysis as well asWireshark/PCAP

format import and export

Call tracking Automatic multi-interface correlation analysis, able to generate complete cross-interfaceflowforanycall:

• Supportsend-to-endcorrelationformulti-interfacecallflows• IncludessupportforUu/S1/X2/S5/S6a/S8/S11/S10/Gx/Rx• Supportsjointcalltrackingbetweenuserplanesandsignalingplanes• S1orX2basedswitchingprocessanalysis

KPI statistical analysis Includes statistical analysis for multi-interface and multi-network elements and trafficanalysisattheE-RAB-level:

• Canperformcomprehensivestatisticalanalysisonsignalinganduserplanes,accuratelycalculatethroughputandlatencyaswellasanalyzeTCPsessionre-transmissions

• Drawscurvechartsforavarietyofindicatorsandmarkevents

9

• Performsin-depthanalysesofusercalldroprate,QCI,andotherindicators

Application scenarios • LTEnetworkinterfacesignalingmonitoringandfaultlocation• InterworkingamongLTEnetworksandinteroperabilitytestingbetweenLTEand2G,3G,andLTEvoicenetworks(suchasSRVCC,CSFB)

• AnalysisofLTEnetworkuserplaneperformancesuchasQoSandthroughputanalysis

• LTEwirelessnetworkoptimization,suchasanalyzinguseradhesionratebycellpower and call drop rate


SART/DNA LTE Distributed Network Analyzer Order Number

High density distributed network analyzer J6804A8-port 10/100/1000M J6850A 16 port 10/100/1000M Ethernet interface card J6851A 10 GE and 10/100/1000M integrated Ethernet capture card J6872A-10G Basic software for signaling analysis platform J7830A

Multi-user server platform software J7831A Software options supporting LTE Network interface J7880ALTE IP Sec Decipher J7881A LTE NAS Decipher J7882ALTE uu interface supporting options J7889A LTE uu interface Sanjole supporting options J7889A-SJ1LTE uu interface E6474A NiXT drive test supporting options J7889A-NX1 IMS supporting options J7844ANetwork analyzer 10GE hardware supporting options J6865AEthernet network analyzer J6840A

10

TheJD745Abase station analyzer ismainlyused fordevelopment, debugging,testing, installation and maintenance of a variety of base stations for modern com-munication systems. It utilizes spectrum analysis, signal quality and modulation analysis, antenna system testing,powermeter, andT1/E1analysis capabilities,and supports all mainstream modern communication systems and formats. Test frequenciescover100k-4GHz.ItalsoincludessupportforGSM/GPRS,EDGE,TD-SCDMA,PCS/DCS,WCDMA/HSDPA,CDMA2000,EV-DO,andTD-LTEand FDD LTE.

Spectrum analyzerFunctionsinclude:

• Channelpower• Spectralmasktest• Occupiedbandwidthmeasurement• Adjacentchannelpower• Spuriousemission• Fieldstrength• AM/FMaudiodemodulation

JD745A Base Station Analyzer

Interference analysis

Spectrum analysis

Antenna testing

Power Measurement

Transmitter modulation analysis

E1/T1 transmission line test

JD745A Base Station Analyzer

11

LTE transmitter analysisJD745A modulation domain measurement suite not only provides systematicRF parameters, but alsomeasures and analyzes in detailmodulation domainparametersofmodernmainstreamcommunicationssystems.Built-instandardtest procedure allows the user to achieve one-touch automatic measurement.

Functionsinclude:

• Channelpower• Adjacentchannelleakagepowerratio(ACLR)• Emissionmask• Occupiedbandwidth• Spuriousemission• Powervs.time• Datachannelsummary• Controlchannelsummary• Subframesummary• Framesummary• Frequencyerror• Complementarycumulativedistributionfunction(CCDF)• EVM(Peak/RMS)• Originoffset• Timeoffset• TotalEVM• P-SCH/S-SCH/PBCH/PCFICH/PHICH/PDCCH/PDSCH/RSEVMpower• Constellation• EVMvs.subcarrier• EVMvs.symbol• Spectralflatness• IDScanner• MultiPathprofile(Ec/Io,Delay)• Cell,GroupID,SectorID• RXpowertrend

12

Inaddition,JD745Aalsosupportsthefollowingfunctions:

• Overtheairmeasurement• Cableandantennaanalysis• Powermeter• E1/T1analyzer• Interferenceanalysis• Automatictesting• GPSandgeographicinformation


JD745A Base Station Analyzer Order Number

GPS receiver and antenna JD745A010Interference Analyzer JD745A011 Channel scan JD745A012CDMA2000 signal analysis JD745A020 EVDO signal analysis JD745A021

GSM/GPRS/EDGE signal analysis JD745A022 WCDMA signal analysis JD745A023HSDPA signal analysis JD745A024 TD-SCDMA signal analyzer JD745A025Mobile WiMAX signal analysis JD745A026 FDD-LTE signal analysis JD745A028TDD-LTE signal analysis JD745A029 CDMA2000 over the air signal analysis JD745A040EVDO over the air signal analysis JD745A041 GSM/GPRS/EDGE over the air signal analysis JD745A042WCDMA/HSDPA over the air signal analysis JD745A043 TD-SCDMA over the air signal analysis JD745A045Mobile WiMAX over the air signal analysis JD745A046 FDD-LTE over the air signal analysis JD745A048TDD-LTE over the air signal analysis JD745A049 Through-type power type JD731AEnd connecting type power probe JD732A

13

This is the industry’s leading LTE network-wide monitoring and trouble-shoot-ing platform, with 24x7 support for the capture and correlated analysis of all LTE network interface signaling and user plane information.

Supporting 2G, 3G, and LTEmonitoring in a single solution, accessLTE is anessential tool for LTE network operations, typically reducing fault resolution timesbyupto80%.

Features • Automatic correlation of probe data across multiple interfaces and across

signaling and user planes• Integratedmonitoringandtroubleshootingapplicationssuchthatthreemouse

clicks can take the user from high-level KPI alarms to a display of impacted users’ detailed signaling procedures, thereby greatly improving the speed of fault resolution

• IntelligentKPIdefinitionandalarmthresholding,includingprocedure-based“composite” KPIs that enable fast detection of service faults

• Asingleplatformforcomplete,end-to-endsessiontracingandfaultlocationfor2G,3G,andLTEnetworksincludingI-RAThandovers

Monitored LTE interfaces and protocolsThe accessLTE solution delivers actionable information from data captured on interfacesatkeyLTEnetworkelements—MME,SGW,PGW,PRCF—aswellasinterfacestointerconnected2/3Gnetworks.

• Supports1/10GEphysicalinterfaces• Fullysupportsallversionsof3GPPRel8interfacesandprotocolsincluding:

– S1-MME,S10,S11,S6a:carriescontrol-planedatabetweentheE-UTRANandcore-networkNEs(forexample,MMEandSGW).Providesdetailsonsession set-up, refresh, and tear-down.

– S1u, S5, SGi: carries user-plane information between the E-UTRAN andcore-networkNEs (for example, SGWandPGW). Provides details aboutend-user services such as web access and email.

– Gx,Rx:carries(PRCF)control-planedatarelatingtochargingandpolicycontrol

– Gn,S4:carriescontrol-planedatabetweenLTEandinterconnected2/3Gnetworks

acceSSLTE Network and Service Assurance System

14

Real-time (KPI Alarm) monitoringTheaccessLTEQoSAnalyzerprovidesacomprehensiverangeofreal-timeKPIsdeliveringimmediatevisibilityintocustomer,service,andnetworkQoS.

DefinedKPIscoverbothsignalinganduser-planeperformanceandinclude:• KeyLTEnetworkproceduressuchasdeviceattachandhandovers• End-userthroughputandlatency• RetransmissionofTCPsessions

Real-time/historical fault troubleshootingThe accessLTE Session Trace application provides automatic correlation across multiple interfaces and is able to generate a single complete cross-interface transaction trace for any LTE session.

15

Functionalityalsoincludes:

• Simple investigationworkflowsdrivenby common information such asCell,IMEI, IMSI, MSISDN and failure cause

• Automatic highlighting of problems• Detailedanalysisofintra-LTEandI-RAThandovers

Application scenarios• Detection and diagnosis of LTE network and service faults with detailed analy-

sis across both the signaling and user planes• Analysis of LTE network user experience, including user plane throughput anal-

ysis• LTE network optimization, such as analyzing user service activation success ratebycell,QCIsetting,andotherconfigurationdimensions


LTE software options Order Number

Session Trace 50Mbps MME traffic E4261A-L00Session Trace 5Gbps SGW traffic E4261A-L01 Session Trace 10Mbps MME traffic E4261A-L02Session Trace 1Gbps SGW traffic E4261A-L03 LTE Protocol Pack 2 Session Trace E4261A-L04

Session Trace Mobile Charging Protocol Pack E4261A-L05 QoS Analyzer 50Mbps MME traffic E4261A-L10QoS Analyzer 5Gbps SGW traffic E4261A-L11 QoS Analyzer 10Mbps MME traffic E4261A-L12QoS Analyzer 1Gbps SGW traffic E4261A-L13 LTE Protocol Pack 2 QoSA E4261A-L14QoSA Mobile Charging Protocol Pack E4261A-L15 QoSA LTE Composite Measurement Pack E4261A-L17

16

Withtheintroductionof10Gintotoday’swirelineandwirelessnetworks,thesheervolumeofdatatrafficcausessignificantchallengesfornetworkoperatorsand equipment manufacturers to effectively troubleshoot their problems or routinelymonitornetworkperformance.Giventhesheernumberofdevicesonthenetworkandmulti-Gtrafficrates,real-timetroubleshootingisadauntingtask. PacketInsight from JDSU solves this issue in the most rapid and effective fashion possible, utilizing an advanced hardware/software indexing solutionthat is easy to deploy and use.

Features • LINUX-basedhigh-speed1/10GEpacket-captureappliancedesignedtocon-tinuouslycapture,index,andstoretodiskat10Grates

• Web-basedGUIprovidesaneasy-to-useinterfaceaccessiblefromastandardbrowser

• OpenXMLAPIprovidesforremotecontrolcapabilities,querymanipulation,and data retrieval

• CanbeusedasastandalonedeviceorinconjunctionwithSARTforflexiblenetwork monitoring

• Theonlydeeppacketinspection(DPI)productthatcancapturedataat10Gand simultaneously create an index of user sessions to accelerate end-user pro-ductivity

• Availablein3differentstorageconfigurations:40TB,88TB,and130TBwithsupportfor1Gand10Gports.The130TBversionallowsfor25hoursofdatacaptureat10Grates.


Please contact your JDSU representative for ordering information.

PacketInsight

PacketInsight

17

ThesetoolsextendtheleadingportfolioofT-BERD/MTSportabletestsolutionscreated by experts to simplify network deployment and trusted by leading service providers around the world.

Benefits• Maximizes ROI with a modular, field-upgradeable tester that seamlessly

expands into future technologies and interfaces • Providesanindustry-leading,multi-port10Gmodularplatformfornetworkfieldinstallation,advancedtroubleshooting

• Guaranteesend-customersatisfactionwithdeepapplication layer testing fordata(TrueSpeed™perRFC6349),voice(VoIP),andvideo(IPTV)

• Promotes an efficient service and network-management life cycle withintegrated installation tools and advanced troubleshooting analysis in a single test instrument

• ReducesinstallationandtroubleshootingtimeswithautomatedJ-Completetesttools that follow best practices and provide repeatable methods and procedures with easy-to-understand results

Applications• TestsandtroubleshootsconvergedEthernet/IPbackhaulat10Mbpsto10G

interfaces and captures and analyzes packets • TestsLayers1-3Ethernet/IPSLAswithanauto¬mated,enhancedRFC2544/SAMCompleteperITU-TY.1564

• Tests TDM/PDH to SONET/SDH at OC-3/STM-1 to OC-192/STM-64,including service-disrup¬tion measurements and path-overhead (POH)capture with triggers

• EnablesinstallationandmaintenanceofOTNnetworksupto11.1Ginterfacewith ODU-0 support for Ethernet client interfaces

• Validatesnetworksynchronizationforqualityofexperienceonmobileapplications – Emulatesa1588v2masterclock/slaverecoverytoensureproperpoint-to-point (PTP) message propagation and to verify packet delay varia¬tion(PDV)

– VerifiesaccurateSyncEfrequencysynchroniza¬tionandEthernetsynchro-nizationmessagechannel(ESMC)messagepropagation

• ReadyforpackettransportnetworksusingMPLS-TP• SupportsJ-Complete,anexclusivesuiteofauto¬matedtesttoolsfromJDSU• SupportsSFPandXFPpluggableoptics, includ¬ing50GHzC-bandtunableXFPs



T-BERD 6000A & 8000 Multi-Service Application Module (MSAM)

T-BERD® 6000A Compact Network Test Platform

18

ThisisthelatestadditiontotheleadingportfolioofT-BERD/MTSportabletestsolutions—created by experts to simplify network deployment and trusted by leading service providers worldwide.

Benefits• All-in-onehandheldtooldesignedtoreducethecomplexityofmulti-technology

testing • Optimizedforfieldease-of-usewhileaddressingemergingnetworktechnologies• Guarantees maximum efficiency and success in the evolution of carrier

Ethernet and mobile backhaul networks • Ensures service life-cycle management, integrating both installation andtrouble¬shootingcapabilitiesinoneinstrument

• AutomatesservicesverificationwithsupportofJ-Completesuiteoftesttools

Applications• SixT-BERD/MTS-5800configurations:

– Single- and dual-port Ethernet versions – WithorwithoutTDM/PDHinterfaces – FullyloadedTDM/PDHto10GEthernet,SONET,andSDH

• Layer1-3Ethernet/IPSLAsverification (withClassofService) that includesautomated,enhancedRFC2544testing

• SupportforemergingEthernetsynchronizationtestingincluding1588v2andSyncEverification

• BERtestinguptoOC192/STM-64,servicedisruption,andcircuitmonitoringonTDM/PDH/SONET/SDHinterfaces

• Packettransportnetwork(PTN)-readywithMPLS-TPtechnology• SupportsJ-Completeautomatedsuiteoftestapplications



T-BERD 5800 Handheld Network Test Family of Products

T-BERD® 5800 Handheld Network Tester

19

The SmartClass Ethernet product is an easy-to-use, cost-effective Ethernet testingsolution for basic physical layer cable testing, Layer 2/3 traffic generation, and fullRFC2544testing.Therugged,batteryoperated,application-specifictesttoolletsfieldtechniciansturn-upEthernetandIPservicesbyrunninganRFC2544testorfollowingasetofmethodsandprocedures.TheSmartClassproductcomesintwomajorconfig-urations, one a loopback only device and the other featuring full traffic generation.

Applications• Quickly verify basic Ethernet backhaul performance on 10/100/1 GE withautomatedRFC-2544test

• VerifyClassofServiceswithupto8independenttrafficstreams• SupportstestinginMPLS/VPLSnetworks• Cost-effectiveloopdeviceforend-to-endLayer2/3tests



SmartClass Ethernet

SmartClass Ethernet

Asfiberpenetratesfurtherintonext-generationnetworks,proactivelyinspectingand cleaning each connection point is no longer optional, but critical. Optimized physicalperformanceoffiberconnectionsisimperativetodeliverfuture-proofandreliablePTNandLTEnetworks.Today’sfibertechnicianneedstoolsthatprovideaseamlessworkflowforinspecting,cleaning,testing,andtroubleshootingafiberlinkthatalsodrivesbehavior,bestpractices,andfieldefficiency.JDSUofferses-sentialfiberhandlingtoolsinfast,portable,andeasy-to-usesystemsforanyfibertechnician.TheP5000iDigitalAnalysisMicroscopewithFiberChekPRO™makesit fast and easy to certify that every connection in your network is optimized and complianttoIECStandardpass/failthresholds.


Product Description Order Number

Fiber Essentials Tool Kit: Dual-mag (200/400X) FBP probe microscope and tips, FIT-HP2-60-P4 inspection and test system with 400X PCM, FFL-050 visual fault locator, cleaning tools, utility carrier, carrying case.

FIT-S205-PRO

Inspection Kit: Dual –mag (200/400X)FBP probe microscope and tips, HD2 Display with 200x PCM and adaptors, case

FBP-SE05

Utility Carrier System for FBP-SE05 FBPP-UC2

CDMA2000 signal analysis Digital PASS/FAIL Analysis kit: P5000i, FiberChekPRO Software, tips and Case

FBP-SD101

Digital PASS/FAIL Analysis & Test kit: P5000i, MP-60 w/ FiberChekPRO, tips, adaptors and Case

FBP-SD103

Visual fault locator (compact) FFL-050 Visual fault locator (ruggedized) with 1.25 mm adapter FFL-100Fiber Field Cleaning Kit FCR-CLN-01

Fiber Inspection, Cleaning and Test Solutions

HP3 Series Fiber Inspection and Test System with Compact Video Display and

P500i Digital Analysis Microscope

HP3-60 Kit with P5000i Digital Analysis Microscope and Visual Fault Locator

north americatoll free: 1 866 228 3762fax: +1 301 353 9216

Test & Measurement Regional Sales

latin americatel: +1 954 688 5660fax: +1 954 345 4668

asia pacifictel: +852 2892 0990fax: +852 2892 0770

emeatel: +49 7121 86 2222fax: +49 7121 86 1222

www.jdsu.com/test

Productspecificationsanddescriptionsinthisdocumentsubjecttochangewithoutnotice.©2012JDSUniphaseCorporation301730660010512LTE-NETWORK.BR.NSD.TM.AEMay2012

OTDR and Optical Power Measurement Solutions

Fiber is the lifeline to your customers. The physical integrity of the fiber iscritical for optimum service delivery. It is imperative to properly characterize the performanceofthephysicallayertoensurereliability.TheMTS-2000HandheldModularTest Set solution addresses the complexityoffiber testing anddrivesmaximum efficiency for technicians to perform all the tests required to ensure optimizedperformanceandhigh-qualityfibernetworks.TheMTS-2000handlesthewidestrangeoftestapplicationsincludingOTDR,FiberComplete™automaticIL/ORL,CWDManalyzer,andconnectorinspectionwithIECpass/failanalysis.Thissolutionmakeseventhemostnovicefibertechaninstantfiberexpert.



MTS-2000 Handheld Modular Test Set EM2000TOTDR module: Last Mile range 1310/1550nm E4126LM OTDR module: Metro-Access range 1310/1550nm E4126MA

FiberComplete™ Module: Metro-Access OTDR, IL, ORL 1310/1550nm E4126FCOMP-MALight source option for OTDR Module (through OTDR port) E41OTDRLSPower Meter option for OTDR Module (through OTDR port) E4OTDRPM Optical Spectrum Analyzer for CWDM –COSA-4055 2301/01Digital PASS/FAIL Analysis & Test kit: P5000i with FiberChekPRO, 7x tips and Case FBP-MTS-101

MTS-2000 Handheld Modular Test Set


OMK-35P Singlemode SmartPocket™ Test is a dual-wavelength optical test kit with a single-port laser source and a power meter with a UPP interface for power level and loss test measurement in access, metro and core networks.

2127/02

OLS-35 1310/1550 nm Singlemode Light Source 2303/11 OCC-55 Optical Channel Checker for CWDM wavelengths. 2277/40

OCC-56 Optical Channel Checker for DWDM wavelengths 2277/41 Live Fiber Identifier- integrated OPM adaptors, software and case. FI-60

To deliver high-performance, best-in-class PTN or LTE networks it is critical that the fiber systems are correctly installed and tested.This ensures that thephysical layermeets theminimum optical performance specification require-mentstodeliverreliableservices.JDSUoffersawidearrayofsolutionsfromfiberidentifierstoinsertion-losspowermeasurementtoolsforstandardsingle-modewavelengthorCWDMandDWDMsystems.


Power Measurement and Fiber Identification Solutions

FI-60 Live Fiber Identifier (left), OLS-35 SmartPocket Optical Light Source (center), SmartClass OCC-55

Optical CWDM Channel Checker (right)

JDSU LTE End to End Testing

Documents

Transcript of JDSU LTE End to End Testing