JB-POWER Milled Aluminum Bar End JB-POWER · JB-POWER Milled Aluminum Power Filter Adapter FCR...

2
JB-POWER Frame Reinforcement [Powder Coat Finish] ¥ 150,000.-JB-POWER Chromoly Engine Mount Bolt ¥ 11,000.- ¥ 11,000.- [Rear / Upper] [Rear / Lower] JB-POWER Milled Aluminum Engine Mount Set ¥ 28,000.- JB-POWER Aluminum Swing Arm [Chainguard, Hollow Chromoly Axle Shaft included] Square Chain Adjuster Type Eccentric Type Black Finish + ¥ 10,000.- ¥ 150,000¥ 170,000Seat Cover [Reshaping, Cover with Dimple Surface] ¥ 30,000.- Phone.0796-27-0429 Fax.0796-27-0629 The prices in this catalog are ex. VAT, apply from the 1st. of September 2018 and are subject to change without furter notice. The colors may slightly vary from the photos in this catalog. JB-POWER Chromoly Side Stand Bolt ¥ 7,500.- (Black) (Hard Anodized) (Silver) JB-POWER Milled Aluminum Bar End (Silver/Black) [for JB-Power Handlebar] 1PCS ¥ 3,000.- JB-POWER Handlebar (Chrome/Black) ¥ 6,000.- JB-POWER Milled Aluminum Headlight Bracket (Fork: φ38mm) ¥ 30,000.- JB-POWER Milled Aluminum Racing Stand Hook ¥ 10,000.- JB-POWER Milled Aluminum Numberplate Holder (Silver/Black) [for Japanese Numberplates only] ¥ 16,000.- 149 - Okuno,Toyooka-city,Hyogo668 - 0822Japan

Transcript of JB-POWER Milled Aluminum Bar End JB-POWER · JB-POWER Milled Aluminum Power Filter Adapter FCR...

Page 1: JB-POWER Milled Aluminum Bar End JB-POWER · JB-POWER Milled Aluminum Power Filter Adapter FCR [O-Ring included] Standard Insulator Rubber φ29・ φ31 ・ 33¥ 107,000.-φ29・φ31

JB-POWERFrame Reinforcement [Powder Coat Finish]¥ 150,000.-~

JB-POWERChromolyEngine Mount Bolt¥ 11,000.-¥ 11,000.-

[Rear / Upper][Rear / Lower] JB-POWER Milled Aluminum

Engine Mount Set¥ 28,000.-

JB-POWERAluminum Swing Arm [Chainguard, Hollow Chromoly Axle Shaft included]

Square Chain Adjuster TypeEccentric TypeBlack Finish + ¥ 10,000.-

¥ 150,000~¥ 170,000~

Seat Cover[Reshaping, Cover with Dimple Surface]

¥ 30,000.-

Phone.0796-27-0429 Fax.0796-27-0629

The prices in this catalog are ex. VAT, apply from the 1st. of September 2018 and are subject to change without furter notice.The colors may slightly vary from the photos in this catalog.

JB-POWER Chromoly Side Stand Bolt¥ 7,500.-

(Black)

(Hard Anodized)(Silver)

JB-POWERMilled Aluminum Bar End (Silver/Black)[for JB-Power Handlebar]

1PCS ¥ 3,000.-

JB-POWERHandlebar (Chrome/Black)¥ 6,000.-

JB-POWERMilled AluminumHeadlight Bracket(Fork: φ38mm)

¥ 30,000.-

JB-POWERMilled Aluminum Racing Stand Hook¥ 10,000.-

JB-POWERMilled AluminumNumberplate Holder (Silver/Black)

[for Japanese Numberplates only]

¥ 16,000.-

149-1 Okuno,Toyooka-city,Hyogo668-0822 Japan

Page 2: JB-POWER Milled Aluminum Bar End JB-POWER · JB-POWER Milled Aluminum Power Filter Adapter FCR [O-Ring included] Standard Insulator Rubber φ29・ φ31 ・ 33¥ 107,000.-φ29・φ31

JB-POWER Crank Shaft

Special Overhaul[B/G Exchange, Center Alignment, Pin Welding,Conrod Weight Matching, Counter Weight Polish]

¥ 180,000.-

Full Overhaul[B/G Exchange, Center Alignment, Pin Welding]

¥ 140,000.-

Center Alignment, Pin Welding¥ 25,000.-

JB-POWERTransmission DogUndercut¥ 20,000.-~

JB-POWER Milled Point CoverMagnesium

Aluminum

TYPE-A(BITO)

TYPE-B(BITO R&D)

TYPE-A(BITO)

TYPE-B(BITO R&D)

¥ 28,000.-

¥ 20,000.-

¥ 250,000.-

JB-POWER Exhaust System[4into1, Titanium Silencer]

A JB-POWER Milled Aluminum Sprocket is included with each MAGTAN Set or Rear Wheel. (Hard Anodized)

The standard colors are: Gold, Silver, White, Gun Metal, Black (Gloss, Semi-Gloss, Matt). Other colors are special orders and come for an extra ¥10,000.- per wheel.

JB-POWER MAGTAN ForgedMagnesium Wheel Set

¥ 350,000.-18 Inch Set

19/18 Inch Set¥ 360,000.-

GOODRIDGEStainless Mesh Hose / EARL's Stainless Fitting1PCS ¥ 11,000.-1PCS ¥ 75,000.-

JB-POWER Cast Iron Front Brake Discφ320 6・2/4 POT

¥ 98,000.-6POT 1PCS

JB-POWER Radial Mount Brake Caliper [Pads included]

JB-POWER Milled Aluminum Caliper Bracket[JB Radial Mount Caliper・6POT]1PCS ¥ 25,000.-[AP Racing / Brembo・4POT]1PCS ¥ 20,000.-

1PCS ¥ 15,000.-[AP Racing・2POT]

¥ 5,000.-

JB-POWERMilled Aluminum Mirror Holder[for AP Racing Brake Master Cylinder]

AP Racing Brake Master CylinderCP3125-2 [Brake Light Switch included]¥ 69,000.-

JB-POWER KYB Special Front Fork φ38[Total Length 805mm]Silver Bottom

Black Bottom¥ 140,000.-

¥ 130,000.-

Fixed Offset 45mm

JB-POWER Milled Aluminum Fork Bridge [Triple Trees] (φ38)

¥ 150,000.-¥ 180,000.-Adjustable Offset 40/45mm

Black Finish + ¥ 5,000.-Allen Axle Nut[for JB Swing Arm]¥ 3,000.-

JB-POWERHollow ChromolyRear Axle Shaft

JB Swing Arm Type

¥ 15,000.-STD Swing Arm Type [Nut included]

JB-POWERHollow ChromolyPivot Shaft[Nut included]¥ 15,000.-

JB-POWERHollow ChromolyFront Axle Shaft φ17 [Nut Included]

¥ 19,000.-

JB-POWER Rear Shock Absorber [Total Length 355mm]Kawasaki Type ¥ 75,000.-

Spring Coil [increased Stiffness]

¥ 18,000.-

Hook Wrench ¥ 3,000.-

JB-POWER Milled Aluminum Rear SetLOW Type [115mm Rear, 25mm Up]UP Type [130mm Rear, 50mm Up]

¥ 70,000.-¥ 70,000.-

JB-POWER Milled Aluminum Meter Bracket(Previous Model/Latter Model)¥ 20,000.-

JB-POWEROil Cooler Kit ・Fitting・ Hose・Adapter・Bracket

10 Rows 13 Rows 16 Rows¥ 70,000.- ¥ 75,000.- ¥ 80,000.-

Black Finish + ¥ 5,000.-

JB-POWERComplete Engine Z1¥ 1,400,000.-~Black Finish + ¥ 100,000.-

1PCS ¥ 8,500.-

JB-POWERCylinder Liner

φ65~φ71φ69~φ73φ73~φ76

JB-POWERMilled AluminumKick Shaft Plug¥ 5,000.-

JB-POWER F.C.C.Heavy Duty Clutch ¥ 30,000.-

JB-POWER / COSWORTHForged Aluminum Piston Kit φ71

1,105ccφ73 11.0:11,166ccφ75 10.8:11,197ccφ76 11.0:1JB

JB¥ 115,000.-

1,045ccφ71 11.0:1COSJB

JB-POWERBig Valve & Heavy Duty Valve Spring KitIntake φ37 / Outake φ31 ¥ 130,000.-

JB-POWERSmall Profile Cam Chain Tensioner [Rachet Type, Requires Heavy Duty Idler]

JB-POWERMilled AluminumAir Funnel CRS

Net¥ 8,500.-

¥ 12,500.-¥ 9,000.-Large Body

Small BodySmall Body

45mm70mm45mm

No Net¥ 7,500.-

¥ 11,500.-¥ 8,000.-Large Body

Small BodySmall Body

45mm70mm45mm

Net45mm

Net70mm

45mm 70mm

JB-POWERAluminum Oil Catch Tank

¥ 15,000.-¥ 12,000.-¥ 18,000.-Box Type

Round Type (Polish)Round Type (Blast)

¥ 20,000.-

JB-POWER FCR Carburetor¥ 162,000.-¥ 184,000.-

φ33φ35・φ37

¥ 195,000.-φ33¥ 204,000.-Anodized

Anodizedφ35

¥ 209,000.-φ37・φ39 Anodized

¥ 189,000.-φ39

Net 35mm

JB-POWERMilled AluminumAir Funnel FCR

No Net

Net¥ 7,500.-¥ 8,000.-Large Body

Large Body 35mm50mm

¥ 6,500.-Large Body 35mm・50mm

※Also available in anodized Blue,Red, Green, Gold and Black.

JB-POWER CRS Carburetor

1PCS ¥ 6,000.-

JB-POWER Milled Aluminum Power Filter Adapter FCR[O-Ring included]

Standard Insulator Rubber¥ 107,000.-φ29・φ31・φ33¥ 121,000.-φ29・φ31 Anodized

Insulator Rubber 1131¥ 117,000.-¥ 128,000.-¥ 131,000.-φ31

φ31・φ33φ35

Anodized

JB-POWERKEIHIN CRS Carburetor

JB-POWERKEIHIN FCR Carburetor

Aiming for the world’s best quality and performance motorcycle, Kawasaki Heavy Industries put all stakes on one card and finally released the long–awaited ZⅠ, in 1972. With the release of the W1 in 1966 and the 500SS MACH Ⅲ in 1969, Kawasaki aspiringly strived to establish their “BIG BIKES”, yet failure to overcome the “Wall to the World” resulted in only moderate sales numbers. Therefore, Kawasaki ini�ated the development of an even more powerful, 750cc DOHC straight-four-cylinder, flagship model, yet in 1968 Honda launched the CB750Four (K). With Honda being one step ahead, the surpassed Kawasaki Team changed their plan to build a motorcycle exceeding Honda’s CB750 by far, the Z900 Super Four (ZⅠ). Ul�mately, managers and engineers making the right decisions and consequently aiming for a world-bea�ng product, led to the birth of the hugely successful ZⅠ, which became the cornerstone of today's Kawasaki motorcycles. Even today, it can be said that no bike exceeds the legendary ZⅠ. Forty years a�er its launch the most amazing motorcycle in the world s�ll shines.

¥ 184,600.-

JB-POWER Rear Floating Brake Kit[Cast Iron Disc φ250, CP2696 Caliper, Brake Pads, Caliper Bracket [Collar included], Torque Rod, Torque Rod Anker, Stainless Mesh Brake Hose, Stainless Fitting, Banjo Bolt]