Jands catalogue 2013 14 installed audio

INSTALLED AUDIO

INSTALLED AUDIO

» INSTALLED AUDIO / 54 / INSTALLED AUDIO « » INSTALLED AUDIO / 5

INSTALLEDAUDIO

30 Low impedance amplifiers ..............................................30High impedance amplifiers .............................................30

AMPLIFIERS

Analog Consoles............................................................. 48Digital Consoles.............................................................. 49Digital Stageboxes ......................................................... 4948

MIXING CONSOLES

In-wall Loudspeakers ..................................................... 32In-ceiling Loudspeakers................................................. 32High power in-ceiling loudspeakers ............................. 3432

IN-CEILING/IN-WALL LOUDSPEAKERS

JBL AWC Speakers installed in Pukekohe Township

Surface Mount Loudspeakers ........................................ 36Subwoofer/Satellite Speaker Systems ......................... 38Pendant Speakers .......................................................... 39Column Loudspeakers ................................................... 40High Power Loudspeakers ............................................. 41All Weather Loudspeakers ............................................ 42Line Arrays ..................................................................... 44Nightclub Loudspeakers ................................................ 46

36SURFACE MOUNT LOUDSPEAKERS

06MICROPHONES

Wireless Systems ............................................................. 6Gooseneck Microphones .................................................. 8Boundary Microphones .................................................. 14Paging Microphones ....................................................... 16Headworn and Lavalier Microphones ............................ 16Automixers ...................................................................... 17Conference Systems ...................................................... 18

20ZONE PROCESSORS

Retail & Cafe Turn-key Systems ................................. 20Digital Signal Processors .............................................. 22Network Digital Signal Processors ............................... 24Network Paging Systems ............................................... 28

INSTALLED AUDIO

INSTALLED AUDIO

» INSTALLED AUDIO / 76 / INSTALLED AUDIO « MICROPHONES MICROPHONES

WMS470 professional analog wireless microphone system is the best choice for a cost-efficient, high-performance multichannel system. The pilot tone prevents the user from unexpected startup noise and it continuously sends transmitter data including low battery information to the receiver.

AKG WMS470 WIRELESS SYSTEMS

WIRELESS SYSTEMS

Perception Wireless is a high-performance analog wireless microphone systems which delivers brilliant sound and is easy to use. It is the optimal plug and play wireless solution for small stages, clubs, places of worship, hotels, and gyms.

AKG WMS45 PERCEPTION WIRELESS SYSTEMS

SINGLE CHANNEL SYSTEMS

WMS45-VOCAL 1 x SR45 reciever, 1 x HT45 handheld transmitter

WMS45-INST 1 x SR45 receiver, 1 x PT45 bodypack transmitter, 1 x MKGL instrument cable

WMS45-HEADSET 1 x SR45 receiver, 1 x PT45 bodypack transmitter, 1 x C544L Headworn mic

WMS45-LAPEL 1 x SR45 receiver, 1 x PT45 bodypack transmitter, 1 x CK99L Lapel mic

HT45 PT45 SR45

MKGLCK99LC544L


WMS470-D5 1 x SR470 reciever, 1 x PT470-D5 handheld transmitter

WMS470-C5 1 x SR470 reciever, 1 x PT470-C5 handheld transmitter

WMS470-HEADSET 1 x SR470 receiver, 1 x PT470 bodypack transmitter, 1 x C555L Headworn mic

WMS470-INST 1 x SR470 receiver, 1 x PT470 bodypack transmitter, 1 x MKGL instrument cable

WMS470-LAPEL 1 x SR470 receiver, 1 x PT470 bodypack transmitter, 1 x CK99L Headworn mic

WMS470-PRESENTER 1 x SR470 receiver, 1 x PT470 bodypack transmitter, 1 x CK99L Headworn mic and 1 x C555L Headworn mic

HT470 PT470

CU400

SR470

MKGLCK99LC544L

The WMS4500 analog reference wireless microphone system provides highest channel quantity, maximum reliability and easy setup for large theatre, installed sound and tour sound applications. An optional network remote control allows frequency coordination and monitoring of multi-channel systems via PC software System Architect™, Apple iPhone/iPad/iPod® or via Soundcraft Vi consoles. Includes Pilot Tone transmission for transmitter battery status monitoring and tone code squelch.

AKG WMS4500 WIRELESS SYSTEM

WIRELESS COMPONENTS

SR4500 Diversity wireless receiver, includes rack mount kit

HT4500 Handheld transmitter available with either C535, C5, D7 or D5 mic heads

PT4500 Bodypack transmitter

CU4000 Dual charging unit. I hour quick charge.

PS4000 Central power supply unit for charging up to 12 receivers or 3 charging units

HUB4000Q HiQnet Ethernet interface,. Connects up to 8 wireless devices. iPhone app for HiQnet remote contol.

HT4500 PT4500 SR4500

Headworn and Lavalier microphone options Pg 14 Antennna options and Accessories Pg 110-112

AKG’s revolutionary DMS700 V2 has been designed for theater, conference, live-production and tour-sound applications. Offering bandwidth of up to 155MHz. The state-of-the-art 512-bit audio encryption offers the highest security available for courtroom, boardroom and other confidential meeting environments. An optional network remote control allows frequency coordination and monitoring of multichannel systems by PC software System Architect™, Apple iPhone/iPad/iPod® or Soundcraft Vi consoles.

AKG DMS700 V2 DIGITAL WIRELESS SYSTEM

DIGITAL WIRELESS COMPONENTS

DSR700 V2 Dual diversity digital wireless receiver including graphic spectrum analyzer & dsp, includes rack mount kit

DHT700 V2 Handheld transmitter available with either C5, D7 or D5 mic heads

DPT700 V2 Bodypack transmitter with selectable output power up to 50mW

CU700 Dual transmitter charging unit. 2 hour charging for up to 8 hours battery life

HUB4000Q HiQnet Ethernet interface,. Connects up to 8 wireless devices. iPhone app for HiQnet remote contol.

DHT700 PT4500

SR4500

CU4000

PS4000

HUB4000Q

HUB4000QCU700


CU400 Dual transmitter charging unit. 2 hour charging up to 8 hours battery life

Headworn and Lavalier microphone options Pg 14 Antennna options and Accessories Pg 110-112

• Up to 8 hours AA battery• Up to 6 channels• 10mW

• Up to 14 hours AA battery• Up to 16 channels• Rack mount kit included• 50mW

• Up to 15 hours AA battery• Up to 70 channels• 50mW

• Up to 8 hours 2 x AA battery• Up to 40 channels• 50mW

INSTALLED AUDIO

INSTALLED AUDIO

» INSTALLED AUDIO / 98 / INSTALLED AUDIO « MICROPHONES MICROPHONES

AKG DISCREET ACOUSTICS COMPACT (DAC) SERIES

The DAC (Discreet Acoustics Compact) series is a unique range of high class microphones for applications where budget, not modularity, is a major consideration. The DAC series offers a user-friendly system that fulfills its basic functions perfectly. While an excellent price-performance ratio was achieved by focusing on essential features, no compromise was made with regard to the sound of the capsules.

All microphones are equipped with proper RF shielding to meet the high demands for electromagnetic compatibility in everyday installations. The mix of high class acoustics, RF shielding and the rugged all-metal part design makes the DAC series easy to install and absolutely reliable in use.

The DAC series offer a high class microphone for any application at a remarkable price point.

CGN99C-S CGN99C-L

Cardioid gooseneck microphone,125° pickup angle

3pin male XLR connector

9 to 52V phantom power

Dia: 13.5mmLength: 380/580 mm

Included: Windscreen

Optional: B18, PS3LOCK, H500, H600, SA60, ST1, ST45

CGN99H-S CGN99H-L

Hypercardioid gooseneck micro-phone, 95° pickup angle



Dia: 13.5mmLength: 380/580 mm


Optional: B18, PS3LOCK, H500, H600, SA60, ST1, ST45

CHM99-BLK

Condenser cardioid hanging micro-phone, 125° pickup angle

10 m cable with 3pin male XLR


Dia: 13.5 mmLength: 55 mm


CHM99-WH

Condenser cardioid hanging micro-phone, 125° pickup angle

10 m cable with 3pin male XLR


Dia: 13.5 mmLength: 55 mm


DGN99 DGN99E

PA goosenect microphone

DGN99: unterminated ends with 2m cableDGN99E: 3pin male XLR


Dia: 34 mmLength: 345 mm

Optional DGN99E: PS3LOCK

Available in White or Black

DST99S

General PA / Communications rugged paging microphone

Coiled cable approx. 50-100cm with 3pin male XLR

On/off switch

Length: 23 mmWidth: 120 mmHeight: 410 mm

GOOSENECK MICROPHONES

CGN321STS

Tabletop cardioid microphone set for conference, courtroom and lecturns


9 to 52V integrated phantom power

Length: 300 mm

Included: W30 Windscreen

CGN521STS



9 to 52V integrated phantom power

Length: 500 mm


NEW NEW

Accessories Pg 110-113 Accessories Pg 110-113

INSTALLED AUDIO

INSTALLED AUDIO

» INSTALLED AUDIO / 1110 / INSTALLED AUDIO « MICROPHONES

GN E GOOSENECK AND GN ESP GOOSENECK ACCESSORIES ONLY:

HM1000

Hanging module with 10m cable and 3pin male XLR

Capsule required (see below)


250Hz, -10dB at 50Hz Bass rolloff filter

Dia: 13.5mmLength: 50 mm

Required: Capsule (see pg 10)

Included: Spring steel hanging clamp

Optional: B18

GN155-SET

Elegant gooseneck floor standwith 3pin male XLR

Capsule required (see below)




Required: Capsule (see pg 10)

Included: ST305, extension tube

Optional: B18

ST6

Heavy duty table stand for universal use. It provides two professional 3-pin XLR connectors as audio interface. The ST6 is compatible with wide range of microphones, e.g. the gooseneck microphones of the Compact and DAM series.

GN GOOSENECK ACCESSORIES ONLY:

OTHER GOOSENECK MICROPHONES:

MF-DA

Where impractical to fix a goose-neck from below, the rugged, all metal MF-DA can be screwed on permanently and allows you to route the cable above or below the tabletop. Popular mounting option for altars and lecterns.

ST45

Low profile stand with off-center mount, rubber shock mount feet (Dia. 11.5 cm)

PS3FLOCK

Classic theft-proof lockable panel mount socket.

The PS 3FLock requires a 22 mm mounting hole.

SA60 & ST45

SA60 - Stand Adapter for straight shaft mics

ST45 - Low profile stand with off-center mount, rubber shock mount feet (Dia. 11.5 cm)

H600

Shock mount for permanent installation. Included with the H600 is the A608 insert. The A608 grips the narrow section of the gooseneck and allows for custom height adjust-ments. The H600 requires a 53 mm mounting hole.

H500

Shock mount for permanent installation.

The H500 requires a 50 mm mount-ing hole.


AKG DISCREET ACOUSTICS MODULAR (DAM) SERIES

The Modular Series from AKG Acoustics is used worldwide and has been proving its worth for many years. Offering a choice of five capsule modules with different polar patterns and frequency responses. A wide range of goosenecks and installation modules is also available. A wide range of features minimizes the risk of operating errors, material fatigue, or signal dropouts. The LED ring and self-cleaning gold-plated contacts for the threaded connections and a switchable bass rolloff filter come as standard.

GN15 GN30 GN50

For permanent screw-on installation1.5m cable with 3pin male XLR



Dia: 20mmLength: 160/305/500 mm

Required: Capsule (see below)

Included: DPA phantom power, screw set with rubber bush

Optional: MF-DA, H600, ST1, ST45

GN15E GN30E GN50E






Included: Integrated DPA phantom power

Optional: H500, H600, PS3LOCK, SA60, ST45, ST1

GN15ESP GN30ESP GN50ESP

3pin male XLR connector with programmable mute switch- on/off, push to talk, push to mute






Optional: H500, H600, PS3LOCK, SA60, ST45

GN15E5PIN GN30E5PIN GN50E5PIN







Optional: H500, H600, PS3LOCK, SA60, ST45

GN GOOSENECK CAPSULES:

CK31

Cardioid screw-on capsule

Wide pick up angle ie 1 or more people using the mic

125° pickup angle

Length: 20 mm

Included: W30 windscreen

CK32

Omnidirectional screw-on capsule

Suitable for recording or serveillance use

360° pickup angle

Length: 20 mm


CK33

Hypercardioid screw-on capsule

Suitable for court rooms, houses of worship, embassies

95° pickup angle

Length: 20 mm


CK47


Studio quality, optimum for speech miking

80° pickup angle

Length: 146 mm

Included: W70 windcreen

CK80


Provides excellent intelligibility in acoustically difficult environments

80° pickup angle

Length: 128 mm


MICROPHONES

NEW

GN: GN E: GN ESP: GN E 5PIN:


INSTALLED AUDIO

INSTALLED AUDIO

» INSTALLED AUDIO / 1312 / INSTALLED AUDIO «


Gooseneck microphones are often overlooked but they are high performing electro-acoustic devices which carry out difficult work discreetly and reliably. They have to function flawlessly in demanding situations with very different, often inexperienced speakers yet at the same time deliver perfect speech clarity. AKG gooseneck microphones have been in continuous use at international meetings, conferences, summits, in parliaments and churches for more than three decades.

To quote the Modular Plus series please choose a mounting module, capsule, powering module and accessory if required:

AKG DISCREET ACOUSTIC MODULAR PLUS (DAM+) SERIES

MOUNTING MODULE OPTIONS:

POWERING MODULE OPTIONS:

CAPSULE OPTIONS:

ACCESSORY OPTIONS:

MODULAR PLUS SYSTEM OVERVIEW:

GN15M GN30M GN50M

Premium gooseneck modules for permanent and mobile installations

Integrated switchable LED ring


Required: Capsule see below

Included: LED ring expander

Optional: MFM, MF-DA, H600, ST1, ST45, plus all accessories (see page 11)

GN155M

Premium gooseneck with heavy shock mounted floor stand


1m cable with ModularPlus connector to fit all phantom power modules

Dia: 6mmLength: 1490 mm


Included: LED ring expander

Optional: all accessories (see page 11)

HM1000M

Premium hanging gooseneck module


10m cable with ModularPlus connector to fit all phantom power modules

Dia: 6mm


Included: LED ring expander, hanging clamp

Optional: all accessories (see page 11}

CK49

Reference condenser hyper-cardioid screw-on shotgun capsule

80° pickup angle



Optional: W40M Metal Windscreen

CK43

Reference condenser super-cardioid screw-on capsule

95° pickup angle




CK41

Reference condenser cardioid screw-on capsule

125° pickup angle




PAESPM

Programmable phantom power module with RFi Shield Technology

DAM+ system connector

9-52V input


Includes programmable switch

PAE5M

Phantom power module with RFi Shield Technology

5-pin XLR connector

9-52V input


Extra feed for LED ring

PAEM

Phantom power module with RFi Shield Technology

3-pin XLR connector

9-52V input


MK150M MK150ML

Reference condenser hyper-cardioid screw-on shotgun capsule

80° pickup angle



STSDAM

Heavy duty table stand with extremely good shock absorbing properties. Modular plus 4 pin connector compatible with all Modular Plus Series goosenecks as well as with the gooseneck microphones of the CS3 discussion system. Programmable switch: push to talk, push to mute, push on/off, low cut on/off.

ST6

Heavy duty table stand for universal use. It provides two professional 3-pin XLR connectors as audio interface. The ST6 is compatible with wide range of microphones, e.g. the gooseneck microphones of the Compact and DAM series.

MFM

Flush mount module for reducing body noise from tables. Microphone can be detached when not in use. A special blind cap seals the connector outlet to protect against dust and for an attractive flush interface.

UWA9M

Holder for wireless body-pack transmitters. For use with GN155M floor stand gooseneck module.Use with the MK150ML to create a wireless floor stand microphone for presentations or for choir and instrumental recording.

W40M

Reference windscreen with the highest performance in its class. Two layers of mesh and a combination of foam reduce wind and pop noise to a minimum. Compatible with CK41 and CK43 capsules.

MICROPHONES MICROPHONES

NEW


INSTALLED AUDIO

INSTALLED AUDIO


AKG BOUNDARY MICROPHONES

BOUNDARY MICROPHONES

C547BL

Theatre, Onstage miking, Church, Lectern, Conferencing, Kick drums

Hypercardioid studio quality

3m cable, 3-pin XLR connector


PCC130 PCC130SW

Conferencing, Lectern, Distance Learning, Security, Courtrooms

Boundary layer microphone

Cardioid (PCC130/SW)Supercardioid (PCC170/SW)

Silent operating on/off switch (SW)

12-48V phantom power

TB3M connector

PCC160

Onstage miking, Conferencing, Theatre, Lectern

Industry standard supercardioid boundary layer floor microphone

3 position bass-tilt switch

4.6m cable, TA3F connector

PZM10 PZM10LL

Conferencing, Surveillance & Security and Ticket Windows

Flush-mount hemispherical bound-ary layer microphone

Choice of mic level output or line-level output (PZM10 LL) for optimized level matching

12-48V phantom power (PZM10)12V-24VDC (PZM10LL)

3-pin XLR connector (PZM10)Unterminated wires (PZM10LL)

Off white finish, paintable

PZM11 PZM11LLWR

Surveillance & Security and Ticket Windows, Outdoor Intercoms (WR)

Flush-mount Hemispherical boundary layer microphone,

PZM11LLWR weather resistant (WR)

PZM11LLWR Line-level output connects directly to video recorders

12 to 48V phantom power (PZM11)12 to 24 V AC or DC (PZM11LLWR)

Screw terminal connectors

Off white finish, paintable (PZM11)Silver, paintable (PZM11LLWR)

PZM30D PZM6D PZM185

Music recording, Conference, Theatre

Hemispherical boundary layer microphone

3-pin XLR (PZM30D)XLRM 1.8m cable (PZM6D)3-pin XLR 2.4m cable (PZM185)

CBL410PCC

Plug and play desktop microphone for VOIP applications or recording.

Omnidirectional boundary mic

Cascadable up to 5 units

3.5mm stereo jack, 100cm cable

Available in black and white

CBL410CS

Turn any PC or Mac with USB 2.0 port into an excellent VoIP conference system for up to 10 persons!

Kit comes with 3 x CBL410-PCC and 1 x GHAP1 USB adapter


Available in black and white

CBL410WS

Workstation set for VoIP communica-tion on a single PC or Mac with USB 2.0 port.

Kit comes with 1 x CBL410-PCC, 1 x K20 stereo headphones and 1 x GHAP1 USB adapter


Available in black only.

MB3

Church, Conferencing, Lectern, Secu-rity, Courtrooms

High-performance, supercardioid flush-mount boundary layer microphone


3-pin XLR connector

MB4

Church, Conferencing, Lectern, Secu-rity, Courtrooms

Supercardioid flush-mount boundary layer microphone


4.6m cable, 3-pin XLR connector

C562CM

Recording, Surveillance, Counters

Low profile bounday layer mic

0.5m cable, with 3-pin CLR connector

9 to 52 V phantom power

Dia: 28mmLength: 20mm

Included: Installation hardware and phantom power adapter

SOUNDGRABBER2

Conferencing, Theatre, Church


AAA internal 1.5V battery

1/4" Jack Mono connector

CROWN BOUNDARY MICROPHONES

CBL99

Recording


3m fixed cable with 3pin male XLR connector



Included: Adhesive

AKG CBL SERIES BOUNDARY MICROPHONES


NEW

PLUG N PLAY

VOIPmicrophones

INSTALLED AUDIO

INSTALLED AUDIO


DMM6

Digital Automatic Microphone Mixer

6 Channel input - 1x Stereo Output Input Channels: 6x: Line, Mic, Aux, mono, XLR type

Matix - create different mixes to different outputs

Cascadable up to 10 units (up to 60 inputs)

Phantom Power: +48V, max 10mA per input

Level: -60dBu to 0dBu

Noise Level (22Hz-22kHz, QPK): <-120dBu

DMM12 DMM12BC

Digital Automatic Microphone Mixer

12 Channel input - 2x Stereo OutputInput Channels: 12x: Line, Mic, Aux, mono, Phoenix Type

Two additional stereo audio and one Stereo AES EBU output (DMM12BC only)

Matix - create different mixes to different outputs

Cascadable up to 10 units (up to 120 inputs)

Phantom Power: +48V, max 10mA per input

Level: -60dBu to 0dBu

Noise Level (22Hz-22kHz, QPK): <-120dBu

The DMM6, 12 and 12BC are based on a highly sophisticated algorithm. It offers a high S/N ratio while reducing the number of open microphones to a minimum. Numerous DSP functions make the new generation of DMM highly professional – all out of one 19” 1HU device. The DMMs are cascadable up to 10 units.

All 12 (6) inputs are individually routable to 2(1) stereo outputs, one stereo record output and an AES-EBU (at DMM12BC) output. An RS232 interface allows external control – e.g. AMX or Crestron. The following adjustable functions are available: - Level, Treble, Bass, Low Cut, Limiter, Compressor, Automixing yes/no, Priority (ducking), Pan / Balance, Routing To REC, Routing To Out1, Routing To Out2, Delay. In addition the DMM12BC provides a 12 band graphic EQ on the 2 main outputs. An intuitive, unique user interface allows easy control and adjustment of each function, in case one would use an analogue device – but with all the advantages the digital world offers.

AKG DMM DIGITAL MICROPHONE MIXER SERIES

AUTOMIXERSPAGING MICROPHONES

AKG PAGING MICROPHONES

DST99S

Dynamic cardioid gooseneck microphone with rugged, all-metal body and stand

Table stand includes an on/off switch and coiled cable with 3-pin XLR

Table stand: 160 x 120 x 65 mm

DGN99 DGN99E

PA dynamic cardioid gooseneck microphone with rugged, all-metal body

DGN99: 2m unterminated cableDGN99E: 3-pin male XLR


Optional accessories: PS3FLOCK and H500

AKG LAVALIER MICROPHONES

AKG HEADWORN MICROPHONES

LAVALIER & HEADWORN MICROPHONES

CK99L

Clip-on cardioid microphone for use with wireless systems

1.6m cable with 3pin male XLR

1.5 to 10VDC or 9 to 52V phantom power using MPA-V-L

Dia: 13.5mmLength: 55 mm

Included: Clip, W55 windscreen


NEW

C555L

Vocal & speech applications

Cardioid

Condenser

Secure and comfortable fit

Includes W444 windscreen and moisture shield

3-pin mini XLR connector for wireless

C111LP

Theatre & presentation applications

Omnidirectional

Condenser

Ultra lightweight desing

Includes windscreen, protective bag and cable clip


DMM12BC

DMM12

DMM6

Accessories Pg 110-113 Wireless systems Pg 18-20

C417

Theatre & broadcast applications

Omnidirectional

Condenser

Includes W77 windscreen, H40-1 tie clip, H41 pin, adhesive putty, moisture shield, assorted colour windscreens

C417L: 3-pin mini XLR for wireless, blackC417LP: as above fleshtoneC417PP: XLR connector

CK97CL

For theatre & broadcast

Cardioid

Condenser

125° Pickup angle

Includes W97 windscreen, H40-1 tie clip, H41 pin


C544L

Aerobics & speech applications

Cardioid

Condenser

Secure and comfortable fit

Includes W444 windscreen and 4 x moisture shields


C544L-TA4F: TA4F connectorC544L: 3-pin mini XLR for wireless

CGN321STS CGN521STS



Length: CGN321STS 300mm / CGN521STS 500mm


NEW

INSTALLED AUDIO

INSTALLED AUDIO


CS5-IRT1

Infrared radiator

Up to seven language channels

Compliant to IEC-60914

2 BNC connectors and 50 Ohm coaxial cabling

300m working distance (CS5IRT1)500m working distance (CS5IRT2)

Inlcuded: U bracket

CS5-DU

Delegate Unit

Built-in microphone and loudspeaker

1 step voting from the unit

2 x 3.5mm headphone outputs

3+1 languages selectable for two users

Optional: CK Capsule, CS5MK1.25m - 20m and CS5PS12 PSU

CS5-IRR7

Infrared receiver

Up to seven selectable channels

3.5mm stereo jack for use with headphones

12 hours per charge

CS5-VU

Chairman/Delegate Unit

Built-in loudspeaker

1, 3, 5-way voting/polling function

Dip-switch selectable president and delegate operating modes

Up to 63 language channels independently selectable for two users

Optional: chip-card identification, CK Capsule, CS5MK1.25m - 20m and CS5PS12 PSU

K20

Conference stereo headphones

Lightweight and extremely comfortable

Replaceable foam ear pads

3.5mm jack connector

CS5-IU

Interpreter Unit

Built-in loudspeaker

Four input channels selectable: floor, two pre-selected languages, relay

Can be used with gooseneck, separate headphones or headset

Optional: CK Capsule, CS5MK1.25m - 20m and CS5PS12 PSU

The CS5 is a highly flexible, hardwired, digital conference system for fixed and mobile conference applications. With less than 10 different components, the CS5 can be configured to work as a small and mobile discussion system, or as a large permanently installed conference system where voting, delegate management, simultaneous translation and language distribution functions are needed.

The CS3 System is a modular and flexible conference system for small and medium size applications. It´s reliable components can be easily set up, wired and expanded. One CS3 base unit can support 60 microphones. With the help of a second base unit the system can be expanded to up to 120 units. The base unit connects to all relevant devices like PA, recording, external audio sources and camera control systems. Different operating modes enable automatic or controlled conferences, even without PC remote

AKG CS5 SERIES CONFERENCE SYSTEMAKG CS3 SERIES CONFERENCE SYSTEM

CONFERENCE SYSTEMS


CS3BU

Base Unit - interface for all audio devices in meeting room including camera control

Work alone mode or remote controlled via RS232

Free or controlled speech modes

Plug and play - very easy setup

Four different operation modes

Power Supply: SMPS 100-240V (50Hz/ 60Hz) 3A

CS3CU30 and CS3CU50

Chairman Unit

Priority (mutes all delegates) and “next in line” (activate the next microphone in waiting list) button, speak button, a built-in loudspeaker and two headphone jacks

Power Consumption 3W, Power supplied by Base Unit

Intercommunication DIN8-pole

Headphone Output 9dBu, 8-32ohm, 3.5mm

CS3CU30: 300mmCS3CU50: 500mm

Dimension 170L x 143Wx 63H mm

Included: 2m cable, microphone, windscreen

CS3DU30 and CS3DU50

Delegate Unit

Power supplied by Base Unit

Speak button, a built-in loudspeaker and two headphone jacks

Power Consumption 3W, Power supplied by Base Unit

Intercommunication DIN8-pole

Headphone Output 9dBu, 8-32ohm, 3.5mm

CS3DU30: 300mmCS3DU50: 500mm

Dimension 170L x 143Wx 63H mm

Included: 2m cable, microphone, windscreen

CS3EC

System cable for CS3 discussion systems

CS3EC002 - 2m cableCS3EC005 - 5m cableCS3EC010 - 10m cableCS3EC020 - 20m cableCS3EC050 - 50m cableCS3EC100 - 100m cable

CS3ETC

Splitter for CS3 cables

CS3ECT002 - 2m cable with T connectorCS3ECT005 - 5m cable with T connector

CS5-BU

Base Unit - digital controller for any size systems

Complete with all inputs and outputs needed for complex systems

Integrated infrared signal output

Free basic control software included

Included CS 5 PS12

NEW

INSTALLED AUDIO

INSTALLED AUDIO

» INSTALLED AUDIO / 2120 / INSTALLED AUDIO « ZONE PROCESSORS ZONE PROCESSORS

RETAIL & CAFE TURN-KEY SYSTEM

JBL CS COMMERICAL SERIES SYSTEMS

All the products in the JBL CS Series are application-engineered specifically for Retail and Hospitality. The CSMA mixer/amps offer unmatched ease of use, with a clean, front panel featuring only volume controls for each channel, master volume adjustment, adjustable bass and treble controls and a power switch. All the volume controls are surrounded by an illuminated ring, making them easy to see and operate in darkened environments.

CSR-V

Volume only

Wired with Cat 5 cable with un RJ-45 connectors up to 1000 feet (305 m)

Available in Black to order only

TV

CSPM1

1 zone paging microphone

1 PTT Button

WMS40MINI

Single or Dual systems available

Up to 30 hours AA battery

10mW

CSS8006BM

6.5” full-range driver

70 Hz – 20 kHz (-10dB)

120° conical

94 dB (1W/1m)

6W - 6, 3, 1.5W (100V taps)

200 x 66 (Dia x Depth mm)

175 (Open Back Cutout Dia mm)

Optional: CSS-BB6BM backcan

CSS1ST

5.25” 2 way monitor speaker

70 Hz – 20 kHz (-10dB)

120° x 120° coverage

86 dB (1W/1m)

10W, 5W (100V taps)

229 mm x 159 mm x 143 mm

Included Accessories: Wall-mounting brackets as-sembly with tilt-pan aiming


NEW

CS SERIES APPLICATION EXAMPLE:

CHOOSE YOUR MIXER/AMPLIFIER: ADD YOUR CHOICE OF SPEAKER:

ADD A REMOTE VOLUME CONTROL: ADD A PAGING MICROPHONE: ADD A WIRELESS MICROPHONE:

More Speaker options Pg 32-33

Inputs Outputs Power 8Ω/100V 6W tap 3W 1.5W 10W 5W

CSMA180 4 1 80W 12 24 48 8 16

CSMA1120 4 1 120W 20 40 80 12 24

CSMA240 8 2 2 x 40W 2 x 6 2 x 12 2 x 24 2 x 4 2 x 8

CSMA280 8 2 2 x 80W 2 x 12 2 x 24 2 x 48 2 x 8 2 x 16

CSMA2120 8 2 2 x 120W 2 x 20 2 x 40 2 x 80 2 x 12 2 x 24

Up to how many CSS1ST will each model drive

Up to how many CSS8006M will each model drive

CSR-V CSR-V

MUSIC INPUT

PAGING MIC

WIRELESS MICSPEAKERS

CONTROL50PAK

4 x 2.5” low distortion 2 way satellite 1 x 8” high power subwoofer

32 Hz – 20 kHz (-10dB)

87 dB with 4 satellites (1W/1m)

80W, 40W, 20W (100V taps)

115 x 84 x 96 (H x W x D mm satellite) 356 x 391 x 203 (H x W x D mm subwoofer)

Wall bracket included

Available in Black or White

• Fanless, space-saving 1U design• Supports 70V and 100V distributed audio systems without

needing a separate transformer• Remote volume control capability using JBL CSR-V module

and standard Ehternet cable• Priority muting• Configurable output routing for 1 or 2 zones

INSTALLED AUDIO

INSTALLED AUDIO


DBX ZONEPRO SERIES

Ex Stock Inputs Outputs Front Panel Control Mic Preamps S/PDIF Ethernet Mix Functionality ANC*

1260M 12 6 Y 6 Y Y Y Y

1260 Y 12 6 Y 2 Y Y Y

1261M Y 12 6 6 Y Y Y Y

1261 12 6 2 Y Y Y

640M 6 4 Y 4 Y Y Y

640 Y 6 4 Y 2

641M Y 6 4 4 Y Y Y

641 6 4 2

The ZonePRO™ family of Digital Zone Processors consists of eight devices with different functionality (see table below). Each device, with optional control from an extensive range of Zone Controllers, represents an inexpensive and quickly-deployed solution for a diverse range of commercial audio applications. The Configuration Wizard guides you through the step-by-step configuration process, ensuring that you go from requirements to solution in just a few mouse clicks.

*Ambient Noise Compensation

ZonePRO 640

ZonePRO 1260

DBX ZONEPRO CONTROLLERS

DIGITAL SIGNAL PROCESSORS

ZonePRO 1261M

ZonePRO 641MZONEPRO SERIES APPLICATION EXAMPLE:

ZC-1

Programmable Volume Control

For use with:260, 4800, Zonepro

ZC-7

Programmable Push-To-Talk Page Assignment


ZC-2

Programmable Volume Control & Mute


ZC-8

Programmable Volume and Source Select


ZC-3

Programmable Selection


ZC-9

8 Source Selection

For use with:4800, Zonepro 1260/1261 only

ZC-4

Program Selection


ZC-BOB

Allows “home-run” or parallel wiring


ZC-6

Programmable Volume Control

For use with:4800, Zonepro

ZC-FIRE

Fire Safety Interface

For use with:4800, ZoneproMOST

FLEXIBLE

MOSTFLEXIBLE

INSTALLED AUDIO

INSTALLED AUDIO


NETWORK DIGITAL SIGNAL PROCESSORS

The Soundweb London BLU-100 series offers fixed configuration of analog inputs and outputs, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus. All models feature open architecture which is fully configurable through HiQnet™ London Architect and Audio Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. These processors feature a low latency, fault tolerant digital audio bus of 48 channels which uses standard Cat5e cabling giving a distance of 100m between compatible devices. All processors feature 400MHz of signal processing power and offer RS-232. Fiber media converters can be used to increase the distance between devices to over 40km.

Soundweb London offers configurable I/O, configurable signal processing and a high bandwidth, low latency, fault tolerant digital audio bus of 256 channels. All models feature open architecture which is fully configurable through HiQnet™ London Architect and Audio Architect, Four Input / Output Card Slots, Analog and Digital Inputs and Outputs, AEC Inputs, Telephone Hybrid Card, 12 Control Inputs and 6 Logic Outputs for GPIO and a Soundweb Interface Kit for Third Party Control System Integration (Documentation).

BSS SOUNDWEB LONDON FIXED I/O DEVICE BSS SOUNDWEB LONDON CONFIGURABLE I/O

BLU-100

12x8 Signal Processor

48 Blu-Link digital channels

12 Analog Inputs (with 48v Phantom Power per Channel)

8 Analog Outputs

Bi-Directional Locate Functionality

12 Control Inputs and 6 Logic Outputs for GPIO Integration

Soundweb London Interface Kit for Third Party Control System Integration (Documentation)

BLU-101

Conferencing Processor with AEC



8 Analog Outputs

12 Channels of AEC Processing with Auto Gain Control and Noise Cancel-lation




BLU-102

Conferencing Processor with AEC and Telephone Hybrid



8 Analog Outputs

RJ-11 Telephone Input/Output Port

8 Channels of AEC Processing with Auto Gain Control and Noise Cancel-lation




BLU-BIB BLU-BOB

Break-in Box and Break-Out Box

BLU-BIB: 8 Analog Audio Inputs

BLU-BOB: 8 Analog Audio Outputs

DIP Switches for Channel Range Selection

BLU-BIB: Front Panel Input Gain, Phantom Power Control, Lockout, Stealth Mode

BLU-BOB: also available as 1/2 rack version (BLU-BOB1)

1U Rack-Mount Kit available sepa-rately for 1/2 rack versions

BLU-160

Signal Processor

256 Blu-Link digital channels - Ring Network

Up to 16 Analog, Digital, AEC Inputs

Up to 16 Analog, Digital Outputs

Up to 4 Telephone Connection

800MHz Signal Processing

BLU-805

Signal Processor


128 AVB digital channels - Layer 2





BLU-120

I/O Expander





BLU-325

I/O Expander


128 AVB digital channels - Layer 2




BLU-LINK PROCESSORS:

AVB & BLU-LINK PROCESSORS:NEW

Controllers and Card options Pg 27 Controllers and Card options Pg 27

BLU-100 & BLU-101

BLU-BOB2

BLU-102

BLU-BIB BLU-BOB1

INSTALLED AUDIO

INSTALLED AUDIO

» INSTALLED AUDIO / 2726 / INSTALLED AUDIO « ZONE PROCESSORS

BSS SOUNDWEB INPUT/OUTPUT CARD OPTIONS

Nos. of Ch Input Level

BLU-CARD-IN 4 Mic/Line/Phantom

BLU-CARD-OUT 4 AES/EBU / SPDIF

BLU-DIGITAL-IN 4 4 x additional dry inputs

BLU-DIGITAL-OUT 4 Line

BLU-CARD-AEC 4 AES/EBU / SPDIF

BLU-CARD-HYBRID 2 Mic/Line

BLU-HIF Telephone Headset Interface

ZONE PROCESSORS

NETWORK DIGITAL SIGNAL PROCESSORS

Power, flexibility and reliability for any scale of installed sound system. With a choice of ten different devices within the Soundweb London family, Soundweb London represents a truly flexible and scalable system. Whether you require the high bandwidth audio networking of a digital audio bus, CobraNet compatibility, DSP capability, input / output expansion or a specific mix of functionality, Soundweb London offers the building blocks of a tailor-made system. Teleconferencing is now possible with the new Hybrid card which enables London devices to interface with a standard POTS (aka PSTN or Analog PBX) telephone network.

BSS SOUNDWEB LONDON CONFIGURABLE I/O

BLU-10

BLU-8 BLU-3

BLU-6

SW9015 SW9012

Create custom control screens for the Soundweb range of processors

BSS SOUNDWEB LONDON CONTROLLERS

Official Soundweb London Level 1 or Level 2 training courses are available throughout the year in Auckland, Wellington and Christchurch.• Level 1 2 day Programming Fundamentals.

It is intended for users who are new to Soundweb London. This is a comprehensive course covering all you need to know for programming Soundweb London.

• Level 2 2 day Advanced Programming. This is a detailed look at some of the more advanced capabilities of Soundweb London. It is intended for Soundweb London users who already have a firm understanding of the Level 1 topics.

These InfoComm CTS accredited courses allow students to gain official certification with Soundweb London.

BSS SOUNDWEB CERTIFICATION TRAININGBLU-806

Signal Processor

256 Blu-Link digital channels - Ring network

128 Dante digital channels - Ethernet Layer 3





BLU-800

Signal Processor


64 Cobranet digital channels - Standard Ethernet Layer 2





BLU-326

I/O Expander


128 Dante digital channels - Ethernet Layer 3




BLU-320

I/O Expander


64 Cobranet digital channels - Standard Ethernet Layer 2




DANTE & BLU-LINK PROCESSOR:

COBRANET & BLU-LINK PROCESSOR:

NEW

HIQNET AUDIO ARCHITECT NEW

The original HiQnet vision of 2005 was to create a common control platform for all devices from microphone to speaker. Seven years later, the tally of devices in the HiQnet family exceeds 150 – from wireless microphone hubs, mixing consoles and signal processors, to amplifiers and powered loudspeakers. In creating the brand new HiQnet Audio Architect™, Harman has also incorporated the BSS Audio Soundweb London DSP system backbone within the core functionality of System Architect – combining the power of our proven open-architecture platform with AKG wireless microphones, dbx and Lexicon fixed-architecture processors, Crown amplifiers and JBL powered loudspeakers.

INSTALLED AUDIO

INSTALLED AUDIO

» INSTALLED AUDIO / 2928 / INSTALLED AUDIO « ZONE PROCESSORSZONE PROCESSORS

IDX NETWORKED AUDIO COMMUNICATION SYSTEMS

INFORMATION DELIVERY SYSTEMS

A COMPLETELY SCALABLE SYSTEM

Harman’s IDX system is a seamless audio and visual information delivery solution that provides a highly flexible and scalable way to communicate important information to those trying to navigate complex spaces such as today’s airports, transit stations and other public spaces.

Harman’s experience and expertise in audio, matched with Com-Net Software’s depth of experience and knowledge, bring to you a new and comprehensive approach to information delivery that has not been seen before. The system is designed and built to exceed professional audio standards, incorporating premium microphones, amplifiers and loudspeakers for the best audio quality available.

The IDX system is Powered by ECLIPSX® software, and utilizes a standard database server for straightforward information management. It supports a multilingual message library and features robust logging of captured events for auditing and live playback. The IDX solution is the most advanced dynamic message delivery engine on the market.

APPLICATIONS

• CASINOS

• CONFERENCE VENUES

• UNIVERSITIES

• HOTELS

• AIRPORTS

• TRANSIT

PDC-100

IDX Controller with server software preloaded

Dell™ Precision™ R5500 Rack Workstation, Windows 7

Centralized Management and Logging for IDX 100 Systems of up to: 12 Paging Stations14 Background Music Channels2 Pre-Recorded Message Channels

Wizard-Driven Configuration of PDC-100 by IDX 100 Designer (Client) Software

PDP-DSP

IDX 100 Public Address Processor

8 Analog Inputs (with Phantom Power per Channel), 8 Analog OUtputs

256 Channel, Low Latency, Fault Tolerant Digital Audio Bus

Wizard-Driven Configuration of PDC-100 by IDX 100 Designer (Client) Software

Pre-Configured Signal Path


In IDX 100 System Up to 96 Output Zones Using 2 PDP-DSP Devices

PDP-BOB

IDX 100 Ouput Expander "Break Out Box"

8 Analog Audio Outputs

256 Channel, Low Latency, Fault Tolerant Digital Audio Bus

DIP Switches for Channel Range Selection

Standard Terminal Block Connectors for Analog Audio Connections and Power Connection

In IDX 100 System Up to 96 Output Zones Using 12 PDP-BOB Devices

CT16S

IDX 100 Amplifier switcher with monitoring and control by PDC-100

16 Primary & 16 Backup Amplifier Inputs; 16 Speaker Outputs

I8:1 or 1:1 Backup Operation

Automatic Switching of Failed Primary Amplifier Channel to Idle Backup Amplifier Channel

Hi-Z (70V / 100V) Capability; 2A of Continuous Current or 1000W per Channel of Audio Signal Capability

DT-715

Paging Station Base Unit

Sends Pages to 96 Zones (max)

Audio and Control via CobraNet™

Paging Microphone, Monitor Speaker, PTT button, 15 x User Definable Buttons

Powered via PoE or a DC Power Adapter (included)

DTE-710

Paging Station Extension Unit (pictured 1 x DT-715 + DTE-710)

10 User-Definable Function Buttons

Connect up to 12 Units (Daisy Chain) to a DT-715

NEW

INSTALLED AUDIO

INSTALLED AUDIO

» INSTALLED AUDIO / 3130 / INSTALLED AUDIO « AMPLIFIERS AMPLIFIERS

CROWN CDi SERIES

• Low impedance and High impedance (70V)• Accurate, uncolored sound with very low distortion for the

best in music and voice reproduction• Onboard DSP - crossovers, EQ filters, delay & limiting• USB for setup & configuration• Speaker presets

CROWN XLS DRIVECORE SERIES CROWN DCi DRIVECORE SERIES

PROFESSIONAL AMPLIFIERS

(1kHz) 4Ω Dual/ch 8Ω Dual/ch 70V Dual/ch*

CDi1000 500W 275W 500W

CDi2000 800W 475W 800W

CDi4000 1200W 650W 1000W

• High Performance, Class D, weighing less than 5 kgs.• Integrated PureBand™ Crossover System for better

performance and control • Peakx™ Limiters provide maximum output while

protecting your speakers • XLR, 1/4”, RCA inputs provide outstanding flexibility • Efficient forced-air fans prevent excessive thermal buildup

• True Rack Density – Power points of 300W or 600W in 2/4/8 channel configurations. All in a 2 Rack Unit form factor provides flexibility in design tools.

• Minimum Guaranteed Power Ratings – DCi Amplifiers are guaranteed to deliver at least the rated power in the specifications over a longer period of time than any other competing amplifier.

• Constant Voltage 70V or 100V output is available on a channel by channel basis. Bridging amplifier channels is not required.

• "N" versions offer Audio Architect and System Architect supported amplifier.

• TCP/IP based protocol in HiQnet for Network Monitoring and Control. Allows amplifier to coexist on a standard network back bone.

(1kHz) 2Ω Dual/ch 4Ω Dual/ch 8Ω Dual/ch

XLS1000 550W 350W 215W

XLS1500 775W 525W 300W

XLS2000 1050W 650W 375W

XLS2500 1200W 775W 440W

Channels 2Ω 4Ω 8Ω 70V Vms 100V Vms

DCI2300 (N) 2 150W 300W 300W 300W 300W

DCI2600 (N) 2 300W 600W 600W 600W 600W

DCI4300 (N) 4 150W 300W 300W 300W 300W

DCI4600 (N) 4 300W 600W 600W 600W 600W

DCI8300 (N) 8 150W 300W 300W 300W 300W

DCI8600 (N) 8 300W 600W 600W 600W 600W

* 140V Bridge-Mono

CROWN COMTECH DRIVECORE SERIES

• Signal-to-Noise of better than 110dB • Total Harmonic Distortion below 0.05% across the full

audio bandwidth delivering studio-grade sound• For installations that require premium sound quality,

multi-channel configurations, compact dimensions, and quite often zero ambient fan noise.

• Typical applications include boardrooms, video and teleconferencing, VIP suites in stadiums and arenas, and upscale restaurants and retail outlets

(1kHz) 8Ω Dual/ch 100V

CT475 75W optional XFMR4 transformer kit




The new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound ap-plications.

Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in profes-sional and commercial power amplifier technology.

The new DCi Network amplifier is a complete line of high performance installation amplifiers that include network monitoring and control, BLU-Link digital audio transport, and Digital Signal Processing (DSP).

Order "N" versions for Network Control and Blu-link

NEWJBL CSA DRIVECORE SERIES

• Drivecore amplifiers featuring single or dual channels models

• 1U and 1/2 rack wide • Capable of 8Ω and 100V• Works best with JBL CS Series turn-key products (refer

page 20-21)

(1kHz) 8Ω/ch 100V

CSA140 40W 40W

CSA180 80W 80W

CSA1120 120W 120W

CSA240 2 X 40W 2 X 40W

CSA280 2 X 80W 2 X 80W

CSA2120 2 X 120W 2 X 120W

INSTALLED AUDIO

INSTALLED AUDIO


JBL 8100 SERIESJBL CSS SERIES

High-fidelity performance at a cost-effective price point, the 8100 Series is an easy to install loudspeaker solution. Ideal for a wide variety of commercial sound applications from restaurant and retail to professional offices and reception areas.

JBL’s Commercial Series Ceiling Speakers provide excellent performance for paging and background music applications. High sensitivity across the product line provides maximum sound level, even at low tap settings.

JBL CONTROL 10 SERIES

The Control 12C/T, Control 14C/T and Control 16C/T are ideal for applications where excellent sound quality is needed for medium-volume music playback and paging, such as in music cafes, retail stores, airports, reception / waiting rooms, lounges, courtrooms, convention centers, hotels, educational facilities and more. Control 10 Series models feature wide bandwidth, wide coverage, and combined 70V/100V and 8-ohm operation in each speaker. Available in either white (or black to order).

IN-CEILING LOUDSPEAKERS

8128

8” dualcone full-range driver

50 Hz – 16 kHz (-10dB)

90° conical

97 dB (1W/1m)

25W / 8Ω (Transformer bypass)

6, 3, 1.5W (100V taps)


206 (Cutout Dia mm)

8124

4” full-range driver

60 Hz – 18 kHz (-10dB)

130° conical

93 dB (1W/1m)

20W / 8Ω (Transformer bypass)

6, 3, 1.5W (100V taps)


175 (Cutout Dia mm)

CONTROL12CT

3” full range driver

68 Hz – 17 kHz (-10dB)

130° conical

84 dB (1W/1m)

40W Program / 8Ω

15, 7.5, 3.8W 100V taps


170 (Cutout Dia mm)

Grille, backcan and tie-rails included

CONTROL14CT

4” Coaxial 2 way

74 Hz – 20 kHz (-10dB)

120° conical

87 dB (1W/1m)

60W Program / 8Ω

25, 12.5, 6.3W 100V taps


170 (Cutout Dia mm)


CONTROL16CT

6.5” Coaxial 2 way

62Hz – 20 kHz (-10dB)

110° conical

91 dB (1W/1m)

100W Program / 8Ω

30, 15, 7.5W 100V taps


170 (Cutout Dia mm)


IN-CEILING / IN-WALL LOUDSPEAKERS IN-CEILING LOUDSPEAKERS

CSS8006BM

6.5” full-range driver

70 Hz – 20 kHz (-10dB)

120° conical

94 dB (1W/1m)

6W

6, 3, 1.5W (100V taps)


175 (Open Back Cutout Dia mm)


NEW

IN-WALL LOUDSPEAKERS

JBL CONTROL CONTRACTOR IN-WALL SERIES

Control 126W and 128W are premium in-wall loudspeakers designed for applications where top performance from a loudspeaker with minimal visual impact is required. *The high-performance polymer-coated aluminum woofer, aimable pure titanium dome tweeter and sophisticated crossover network provide natural sound, even coverage and smooth, wide frequency response.

CONTROL126W CONTROL126WT

6.5” 2 way speaker

38 Hz – 20 kHz (-10dB)

100W program / 8Ω (126W)

88 dB (1W/1m speech mode)

30W, 15W, 7.5W (100V taps)

280 x 215 x 105 (H x W x D mm)

Cutout: 246 x 181 (H x W mm)

Cutout template & paint shield included

CONTROL128W CONTROL128WT

8” 2 way speaker

30 Hz – 20 kHz (-10dB)

100W program / 8Ω (126W)


50W, 25W, 12.5W (100V taps)

334 x 257 x 110 (H x W x D mm)

Cutout: 300 x 225 (H x W mm)

Cutout template & paint shield included

NEW NEW


JBL CONTROL MICRO SERIES

The Control 24C Micro is a compact in-ceiling speaker, providing full, high quality sound for background music and music-plus-paging systems with shallow depth of just over 100mm.

CONTROL24C-M

4.5” 2 way (shallow backcan)

85 Hz – 25 kHz (-10dB)

150° conical

86 dB (1W/1m)

30W Program / 8Ω


167 (Cutout Dia mm)


CONTROL24CT-M

4.5” 2 way (shallow backcan)

85 Hz – 25 kHz (-10dB)

150° conical

86 dB (1W/1m)

9, 4, 2, 1W 100V taps


167 (Cutout Dia mm)


LOW PROFILE GREAT FOR

SHALLOW DEPTHINSTALLS

INSTALLED AUDIO

INSTALLED AUDIO



HIGH POWER IN-CEILING LOUDSPEAKERS

CONTROL47C-T

6.5” Coaxial 2 way With extended bass

55 Hz – 20 kHz (-10dB)

120° conical

150W program / 8Ω (bypass)

91 dB (1W/1m)

60, 30, 15W (100V taps)


282 (Cutout Dia mm)


CONTROL47LP

6.5” Coaxial 2 way Low profile

68 Hz – 20 kHz (-10dB)

120° conical


91 dB (1W/1m)

60, 30, 15W (100V taps)


282 (Cutout Dia mm)


CONTROL47HC

6.5” Coaxial 2 way for High ceilings

55 Hz – 17 kHz (-10dB)

75° conical


93 dB (1W/1m)

60, 30, 15W (100V taps)


307 (Cutout Dia mm)


CONTROL42C

2.5” Compact Satellite - use with Control 40CST & 50ST

140 Hz – 20 kHz (-10dB)

160° conical

30W program / 16Ω

82 dB (1W/1m)


104 (Cutout Dia mm)

Grille, backcan and C-ring supports included

CONTROL4OCST

8” Subwoofer with crossover

32 Hz – 300 Hz (-10dB)

200W / 8Ω (bypass)

80, 40, 20W (100V taps)

95 dB (1W/1m near corner)


307 (Cutout Dia mm)

Grille, backcan and C-ring supports included

CCONTROL226CT

6.5” Coaxial 2 way

47 Hz – 19 kHz (-10dB)

120° conical


95 dB (1W/1m)

68, 34, 17W (100V taps)


307 (Cutout Dia mm)


CONTROL312CS

12” Subwoofer

30 Hz – 4.5 kHz

400W / 8Ω

93 dB (1W/1m)

366 x 160 (Dia x D mm)

378 (Backcan Cutout Dia mm)

Backcan MTC-300BB12 & Grille MTC-SG12 sold separately

JBL CONTROL 200 & 300 SERIES

Control 300 are designed for larger systems requiring high output, with 8” and 12” low-frequency drivers, high-power compression drivers, and higher sound output capabilities. Whereas the current Control Contractor ceiling speaker models are of an “integrated” design (with pre-attached backcans) these large-format speakers are sold separately from the backcans, allowing for pre-installation of the backcans.

CONTROL328C CONTROL328CT

8” Coaxial 2 way

45 Hz – 18 kHz (-10dB)

120° conical

250W / 8Ω (328C)

93 dB (1W/1m)

60, 30, 15W (328CT 100V taps)

305 x 160 (328C Dia x D mm)305 x 218 (328CT Dia x D mm)


Backcan MTC-300BB8 & Grille MTC-RG8 sold separately


12” Coaxial 2 way

34 Hz – 18 kHz (-10dB)

90° conical

250W / 8Ω (321C)

94 dB (1W/1m)

60, 30, 15W (321CT 100V taps)





High Output 12” 2 way

32 Hz – 20 kHz (-10dB)

90° conical

400W / 8Ω (322C)

95 dB (1W/1m)

100, 50, 25W (322CT 100V taps)





The Control 40 Series Ceiling Speakers are designed to work perfectly in environments that require a premium, in-ceiling speaker with an extremely wide bandwidth and consistent coverage.


2 x Satellites 1 x Subwoofer

111 sq. m at 3 m ceiling height

185 sq. m at 3.6 m ceiling height






SUBWOOFER/SATELLITE COVERAGE

Approximate coverage (up to):

MTC-300BB12

MTC-SG12

MTC-300BB8

MTC-RG8

Refer to page 38 for "Mix n Match" sub-woofer and satellite options.

INSTALLED AUDIO

INSTALLED AUDIO


SURFACE MOUNT LOUDSPEAKERSSURFACE MOUNT LOUDSPEAKERS

JBL CONTROL CONTRACTOR SERIES JBL CONTROL CONTRACTOR SERIES BRACKETS

CONTROL23 CONTROL23T

3.5” 2 way compact speaker

23: 85 Hz – 22 kHz (-10dB) 23T: 100 Hz – 21 kHz (-10dB)

50W program / 8Ω (23)


10W (23T 100V taps)

193 x 140 x 111 (H x W x D mm)

90° X 90° horn

Invisiball wall bracket included


CONTROL25AV

5.25” 2 way in/outdoor monitor

70 Hz – 23 kHz (-10dB)

200W program / 8Ω


60, 30, 15W (100V taps)

236 x 186 x 159 (H x W x D mm)

100° X 100° horn




8” 2 way high output speaker

28: 60 Hz – 16 kHz (-10dB)28T: 55 Hz – 15 kHz (-10dB)



60, 30, 15W (28T 100V taps)

380 x 280 x 220 (H x W x Dmm)

90° X 90° horn



CONTROLSB-2

10” Stereo Subwoofer

38 Hz – 160 kHz (-10dB)

170W program / 8Ω x 2


394 x 585 x 343 (H x W x Dmm)

Corner/Wall/Ceiling brackets optional

CONTROLSB-210

2 x 10” high power subwoofer

42 Hz – 200 kHz (-10dB)

400W program / 8Ω x 2


355 x 590 x 570 (H x W x D mm)

4 x Floor standing feet includedU Bracket optional

CONTROL29AV

8” 2 way in/outdoor monitor

37 Hz – 18 kHz (-10dB)

300W program / 8Ω


110, 55, 28W (100V taps)

520 x 306 x 277 (H x W x Dmm)

110° X 85° rotatable horn



CONTROL30

10” 3 way in/outdoor speaker

38 Hz – 17 kHz (-10dB)

500W program / 4Ω


150, 75, 38W (100V taps)

593 x 372 x 345 (H x W x Dmm)

120° X 110° horn





5.25” 2 way compact speaker

25: 80 Hz – 16 kHz (-10dB)25T: 80 Hz – 15 kHz (-10dB)



30, 15, 7.5W (25T 100V taps)

236 x 188 x 149 (H x W x D mm)

90° X 90° horn



Ceiling Bracket Verticle ArrayBracket

Horizontal ArrayU Bracket

Simply select the JBL Control Contractor loudspeaker appropriate for the architectural, form factor and sonic requirements. The resulting sound system will always deliver on its promise of Performance, Reliability and Value. All include paintable weather resistant enclosures.

JBL Control Speakers installed Les Mills Britomart

INVISIBALL® MOUNTING SYSTEM

WEATHERMAX™ GRILLES

JBL’s exclusive, patented InvisiBall® Mounting System (most models) allows for quick, easy, theft-resistant installation with the built-in mount secured by a few turns of a standard hex wrench.

WeatherMax™ Grilles are available for Control23/25/28 Speakers. Stainless Steel with 3-Layer Foam. Provides IP-x5 Grille Rating.

Order MTC-##WMG.

MTC-23CM MTC-28-25CMMTC-29CM

The Ceiling Mount allows installation of the enclosure to sturdy ceiling structures by utilising the internal InvisiBall mechanism.

Available in Black and White

MTC-25V

Vertical-Array Wall Bracket for Three Control 25 Speakers.


MTC-29UBMTC-30UBMTC-210UB

U Bracket that attaches to both ends of the speaker allowing easy installations on walls and ceilings.


MTC-25-23HMTC-28H

Horizontal-Array Bracket for Two Control 28s, 60 degree Splay, Three Brackets Connect to Form Suspendable Assembly for Six Speakers, 360 degree Coverage.


MTC-SB2CMTC-SB2W

Brackets for Suspending Control SB-2 from a Ceiling or Wall

Available in Black only

Ceiling Bracket

Wall Bracket

INSTALLED AUDIO

INSTALLED AUDIO



JBL Control Contractor 60 Series Pendant loudspeakers bring renowned JBL sound and outstanding coverage to rooms andvenues with open architecture or high-ceilings, while providing superior voice and musical clarity for rooms with difficult acoustics. Included, easy-to-install hanging hardware features redundant suspension cables and UL listed adjustable-height hangers. Four Control 62P’s can be driven from a wallmounted Control 50ST (pg 38) or in-ceiling 40CS/T (pg 34) subwoofer to form a full-range passively crossed-over subwoofer/satellite system.

PENDANT LOUDSPEAKERS

CONTROL62P

For speech and mid-high music applications

2” ultra-compact satellite

150 Hz – 20 kHz (-10dB)

140° Coverage

50W program / 16 Ω

85 dB (4.0V, 1W Full Space)

121 x 128 (H x D mm)141 (H mm top suspension bkt)

2 x Suspension cable systems included (main & safety)

Available in Black or White, paintable.

CONTROL65P-T

Consistant wide coverage with JBL's exclusive RBI technology

5.25” compact full-range

55 Hz – 20 kHz (-10dB)

120° Coverage

75W program / 8 Ω

100V: 60W, 30W, 15W





CONTROL67P-T

Extra large RBI for outstanding pattern control (ie fewer speakers)

6.5” extended full-range

58 Hz – 18 kHz (-10dB)

120° Coverage

75W program / 8 Ω

100V: 60W, 30W, 15W





CONTROL67HC-T

Controlled coverage for high-ceiling and reverberant locations

6.5” narrow full-range

58 Hz – 18 kHz (-10dB)

120° Coverage

75W program / 8 Ω

100V: 60W, 30W, 15W






The Control 50 Series subwoofer-satellite loudspeaker system provides high fidelity sound in restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, or any location where full-range high fidelity foreground/background music is required from surface mount system. The Control Contractor 50’s stylish appearance, easy mounting, and compatibility with JBL’s Control 40 Series (see page 34) in-ceiling models, allows matching to the mounting, aesthetic, and performance requirements of any application. Easy to use and install 200W subwoofer-satellite systems Control50Pak's are perfect for small restaurants and cafes.

SUBWOOFER/SATELLITE SPEAKER SYSTEMS

CONTROL52

2.5” low distortion 2 way satellite

140 Hz – 20 kHz (-10dB)

150° Omnidirectional

50W program / 16Ω

85 dB (1W/1m)

115 x 84 x 96 (H x W x D mm)



CONTROL50ST

8” high power subwoofer

32 Hz – 200 kHz (-10dB)

80, 40, 20W (100V taps)


95 dB (1W/1m near corner)

356 x 391 x 203 (H x W x D mm)



SURFACE MOUNT LOUDSPEAKERS SURFACE MOUNT LOUDSPEAKERS

NEW

CONTROL SERIES SATELLITE AND SUBWOOFER SYSTEMS - MIX ‘N’ MATCH

The Control52, control 42C and Control62P speakers all have similar sound character, similar frequency response, similar sensitivity, similar directivity, and similar impedance. Therefore, you can inter-mix Control 62P, Control 52 and Control 42C speakers, even within the same sub-woofer-satellite system. This is useful if you have a venue that requires different form factors of satellite speakers, such as a low-ceiling sec-tion and an open-architecture ceiling section. You can also choose your subwoofer type, in-ceiling Control40ST or surface mount Control50ST.

or

MIX ‘N’ MATCH SATELLITES:

MIX ‘N’ MATCH SUBWOOFERS:

CONTROL50ST CONTROL40CS-T

CONTROL62P CONTROL52 CONTROL42C

or or 2 x Satellites 1 x Subwoofer




APPROX COVERAGE (UP TO):





JBL Control67HC-T speakers installed at The Grille By Sean Connelly, Skycity, Auckland

GREAT FOR CAFES AND SMALL RETAIL

SPACES

CONTROL50PAK

4 x Control52 2.5” low distortion 2 way satellite 1 x Control50ST 8” high power subwoofer

32 Hz – 20 kHz (-10dB)

80W, 40W, 20W (100V taps)


87 dB with 4 satellites (1W/1m)



INSTALLED AUDIO

INSTALLED AUDIO


SOUND REINFORCEMENT LOUDSPEAKERS


JBL PRX400 SERIES LOUDSPEAKERS

PRX415M

15” 2 way loudspeaker

55 Hz – 19 kHz (-10dB monitor)

600W (Program)

98 dB (1w@1m)

90° X 50° nominal

2 x NL2 1/4" combo inputs

650 x 429 x 457 (H x W x Dmm)

Dual-angle pole socket, 12 x M10 suspension points

Optional sub pole SS4BK-24

PRX412M

12” 2 way loudspeaker

50 Hz – 19 kHz (-10dB)

600W (Program)

95 dB (1w@1m)

90° X 50° nominal


577 x 353 x 400 (H x W x Dmm)

Dual-angle pole socket, 12 x M10 suspension points


PRX400 passive speakers were designed to provide the sensitivity, frequency response and power handling needed for almost any professional audio environment while still being reasonably priced. All full range models utilize twelve M10 suspension points for safe deployment in light duty installations.

PRX418S

15” 2 way powered loudspeaker

350 Hz – 250 Hz (-10dB)

1600W (Program)

95 dB (1w@1m)

2 x NL2, 2 x 1/4" TS inputs

678 x 356 x 615 (H x W x Dmm)


PRX425

2 x 15” 2 way loudspeaker

48 Hz – 19 kHz (-10dB)

1200W (Program)

100 dB (1w@1m)

90° X 50° nominal


1044 x 429 x 521 (H x W x Dmm)

36mm dual-angle pole socket, 8 x M10 suspension points and 1 x M10 pull back point

JBL CBT SERIES

SURFACE MOUNT COLUMN LOUDSPEAKERS

Designed for venues that would typically use larger point-and-shoot speakers, the CBT models offer superior intelligibility in challenging acoustic environments, with a level of user-friendliness that virtually eliminates the challenges of delivering great sound. All models feature an outdoor rating of IP-54.

CBT70J

4x 5” J shaped coaxial line array

60 Hz – 20 kHz (-10dB)

Narrow 25°/ Broad 45°

500W / 8Ω

98 dB (1W/1m narrow speech)

695 x 170 x 237 (H x W x D mm)

10 x M6 insert points, wall bracket included


CBT70JE

4x 5” extension line array for use with CBT70J

System: 45 Hz – 20 kHz (-10dB)

System: 1000W / 4Ω

System: 98 dB (1W/1m speech)

695 x 170 x 237 (H x W x D mm)

10 x M6 insert points, combining bracket included


CBT50LA

8 x 2” line array column

80 Hz – 20 kHz (-10dB)

Vertical 20°/ Horizontal 150°

150W program / 8Ω (switch)


60, 30, 15W (100V taps)

528 x 99 x 153 (H x W x D mm)



CBT100LA

16 x 2” full range column

80 Hz – 20 kHz (-10dB)

Narrow 150°/ Broad 40°/ H 150°

325W / 8Ω (switch)


100, 50, 30W (100V taps)

1000 x 99 x 153 (H x W x D mm)



CBT200LA

32 x 2” line array column

80 Hz – 20 kHz (-10dB)

Narrow 15°/ Broad 30°/ H 150°Asymmetrical 22° (J type)*

400W / 8Ω (4Ω thru mode)


120, 60, 30W (100V taps 8Ω)

2000 x 98.5 x 153 (H x W x D mm)

36 x M6 insert points (per, Swivel (pan) / tilt wall bracket, Coupler plate included

MTC-CBT-FM1 flush-mount low-profile wall bracket optional


CBT 70J & CBT 70JE:

•PerfectforSchoolHalls,Lecture Theatres, churches, for both music and speech.•IncludeCBT70JEifmorebass and/or pattern control is required

CBT APPLICATIONS

CBT 50LA:

•Audiosupportofvideomonitors•Retailstores,conferencerooms and general fill applica-tions•Architecturalspaceswhereapoint-and-shoot speaker may be too visually obtrusive.

JBL CBT70J and CBT70JE

installed at the Metropolitan

Cathedral of the Sacred Heart,

Wellington

CBT 100LA:

•Lecturehalls,conferencecentres, cathedrals, architectural spaces as speaker can be recessed into the wall.•Highpatterncontrol.

CBT 200LA:

•Transit centers, conference centers, cathedrals, multipurpose spaces,gymnasiums, theme parks etc•VeryHighpatterncontrol.

NEW

NEW

WORKS BEST WITH CROWN XLS AND

XTI 2 AMPS

EXCELLENT FOR HIGHLY REVERBERENT

SPACES

INSTALLED AUDIO

INSTALLED AUDIO


HIGH PERFORMANCE LOUDSPEAKERS

JBL AE SERIES LOUDSPEAKERS

The AE Series is a complete line of permanent installation loudspeakers and subwoofers, containing the performance and features that meet the needs of contractors and consultants alike. U Brackets and Planner Array Frames available for all models. All AE Series subwoofers are for ground-stacked or suspended applications in stand-alone arrays or in combination with other AE Series products. Below is a selection of the more popular models however the AE Series contains a total of 32 speaker options.

The AE Series is a complete line of permanent installation loudspeakers and subwoofer, containing the performance and features that meet the needs of contractors and consultants alike. U Brackets and Planner Array Frames available for all models. All models are IP-x3 rated with higher weather proofing options available to order.

JBL AE COMPACT SERIES LOUDSPEAKERS

AM5212

12” 2 way full range loudspeaker

37 Hz – 20 kHz (-10dB)

60° x 40°, 60° x 60°90° x 50°, 100° x 100° or 120° x 60° all rotatable

300W / 8Ω

96 dB (1W/1m passive mode)

711 x 369 x 458 (H x W x D mm)

15 x M10 insert points

MTU-3 U bracket optional

AM5215


35 Hz – 20 kHz (-10dB)

60° x 40°, 60° x 60°90° x 50° or 120° x 60° all rotatable

350W / 8Ω


781 x 420 x 503 (H x W x Dmm)

15 x M10 insert points


AM7212


36 Hz – 20 kHz (-10dB)

60° x 40°, 60° x 60°90° x 50°, 100° x 100° or 120° x 60° all rotatable

700W / 8Ω


711 x 369 x 458 (H x W x Dmm)

15 x M10 fly points


AM7215


34 Hz – 20 kHz (-10dB)

60° x 40°, 60° x 60°90° x 50° or 120° x 60° all rotatable

750W program / 8Ω


781 x 420 x 503 (H x W x Dmm)

15 x M10 fly points


ASB6112


35 Hz – 1 kHz (-10dB)

700W / 8Ω


406 x 369 x 483 (H x W x Dmm)

16 x M10 fly points

ASB6115 and ASB6125

15” high power subwoofer2 x 15” high power subwoofer

32 Hz – 1 kHz (-10dB)

675W / 8Ω (ASB6115)1350W / 4Ω parallel (ASB6215)

97 dB & 100 dB (1W/1m)

483 x 419 x 597 (H x W x Dmm)965 x 419 x 597 (H x W x Dmm)

16 x M10 fly points

ASB7118 and ASB7128

18” high power subwoofer2 x 18” high power subwoofer

ASB7118: 22 Hz – 1 kHz (-10dB)ASB7128: 20 Hz – 1 kHz (-10dB)

1200W / 8Ω (ASB7118)2400W / 4Ω parallel (ASB7128)

96 dB & 99 dB (1W/1m)


16 x M10 fly points

AC15 & AC25

5.25” 2 way loudspeaker & 2 x 5.25” 2 way loudspeaker

80 Hz – 20 kHz (-10dB)

300W & 450W program / 16Ω

86 & 91 dB (1W/1m)

90° X 90° coverage


4 x M8 fly points, (2 x AC15) (4 x AC25) M6 for stand adapter

AC15: MTU-15 U Bracket optionalAC25: MTU-25 U Bracket optional

AC16 & AC26

6.5” 2 way loudspeaker &2 x 6.5” 2 way loudspeaker

55 Hz – 20 kHz (-10dB)

300W / 16Ω & 600W / 8Ω

90 dB & 92 dB (1W/1m)



5 x M8 fly points, 4 x M6 for stand adapter


AC18 & AC28

8” 2 way loudspeaker &2 x 8” 2 way loudspeaker

AC18: 52 Hz – 20 kHz (-10dB)AC28: 53 Hz – 20 kHz (-10dB)

500W and 750W / 8Ω

92 dB & 94 dB (1W/1m)

90° X 50° or 120° X 60°


6 x M8 fly points, 4 x M6 for stand adapter


AC2212 & AC2215

12” 2 way full range loudspeaker &15” 2 way full range loudspeaker

AC2212: 50 Hz – 19 kHz (-10dB) AC2215: 42 Hz - 19 kHz (-10dB)

250W / 8Ω

95 & 97 dB (1W/1m)

90° x 50°, 60° x 40° or 100° x 100°


15 x M10 fly points


JBL CWT SERIES

A typical challenge of many sound reinforcement applications is to provide high quality, full bandwidth sound evenly dispersed across a coverage area greater than 100 degrees. This is often addressed by mounting two speaker systems splayed to achieve wider horizontal coverage. But this approach produces interference (see image right). JBL engineers created an innovative solution to this problem featuring CWT Crossfired Waveguide Technology.

CWT128

Dual 8" 2-Way Loudspeaker System

71 Hz – 20 kHz (-10dB)

1700W (Program) / 8Ω

129 dB (1w@1m)

100V: 110W & 55W

160° x 60° nominal

Barrier strip terminals

811 x 260 x 301 (H x W x Dmm)

4 x M10 suspension points and 4 x M8 for OmniMount wall brackets

Optional: White. WRC and WRX weather resistant versions

NEW

INSTALLED AUDIO

INSTALLED AUDIO


HIGH PERFORMANCE LOUDSPEAKERS LINE ARRAYS

ALL WEATHER LOUDSPEAKERS

JBL VRX SERIES

VRX900 Series Constant Curvature Line Arrays are designed and built to the same high standards as the high end line arrays and use the same advanced, concert-proven drivers. Perfect for smaller live venues, churches, schools and auditoriums.

VRX932LA

12” 2 way line array speaker

57 Hz – 20 kHz (-10dB)

100° x 15°nominal

1600W program / 8Ω


349 x 597 x 381 (H x W x Dmm)

Dual 36mm pole socket & 2 x M10 fly points

Optional accessories:VRX-AF array frameSS3-BK Satellite speaker poleSS4-BK Threaded satellite pole

Available in white to order

VRX928LA


70 Hz – 20 kHz (-10dB)

100° x 15°nominal

800W program / 8Ω


230 x 419 x 267 (H x W x Dmm)

Dual 36mm pole socket & 2 x M10 fly points

Optional accessories:VRX-SMAF array frameSS3-BK Satellite speaker poleSS4-BK Threaded satellite pole


VRX915S


35 Hz – 250 Hz (-10dB)

1600W program / 4Ω


496 x 420 x 597 (H x W x Dmm)

8 x M10 fittings & M20 socket

Optional accessories:VRX-SMAF array frameSS4-BK Threaded satellite pole


VRX918S


31 Hz – 220 Hz (-10dB)

1600W program / 8Ω


508 x 597 x 794 (H x W x Dmm)

M20 socket

Optional accessories:VRX-AF array frameSS4-BK Threaded satellite pole


SURFACE MOUNT LOUDSPEAKERS SURFACE MOUNT LOUDSPEAKERS

JBL VP POWERED INTEGRATED AUDIO SYSTEMS

Best in class and absolutely stunning. The VP Series was developed not only to deliver the best sound available, they are also very user-friendly while also offering an unprecedented level of intelligent control and monitoring capability. Optimised for use in perfoming arts centres, hotels, auditoriums, convention centres and meeting facilities.

VP7210 (95DP)

10” & 4" Titanium damped diaphrapm 2 way loudspeaker system

50 Hz – 20 kHz (-10dB)

90° x 50° rotatable

875W continuous

132 dB (1m)

521 x 293 x 303 (H x W x D mm)

9 x M10 & 2 x M6 insert points35mm pole socket

VP7212 (64DP & 95DP)


47 Hz – 20 kHz (-10dB)

60° x 40° & 90° x 50° rotatable

1100W continuous

136 dB (1m)

702 x 384 x 524 (H x W x Dmm)

14 x M10 insert points and6 x standard air cargo 3” track

Network modules optional: DPAN and DPCN (CobraNet)

VP7215 (64DP & 95DP)


45 Hz – 20 kHz (-10dB)

60° x 40° & 90° x 50° rotatable

1100W continuous

136 dB (1m)

766 x 448 x 524 (H x W x Dmm)

14 x M10 insert points and6 x standard air cargo 3” track


VPSB7118DP

15” subwoofer system

29 Hz – 165 Hz (-10dB)

1800W continuous

129 dB (1m)

515 x 702 x 813 (H x W x Dmm)

24 x M10 insert points and 8 x standard air cargo 3” track


VP Powered Series installed in Les Mills Britomart

JBL VRX POWERED SERIES

Designed in conjunction with Crown, the compact high power DPC-2 amplifier module features DBT (Dual Bridged Technology™) digital amplification circuitry and is integrated into the rear of the VRX enclosures.

VRX932LAP


57 Hz – 20 kHz (-10dB)

875W continuous


100° x 15°nominal

349 x 597 x 444 (H x W x Dmm)

Dual 36mm pole socket

Optional accessories:VRX-AF array frameSS3-BK Satellite speaker poleSS4-BK Threaded satellite pole

VRX918SP


31 Hz – 220 Hz (-10dB)

750W Continuous


508 x 597 x 749 (H x W x Dmm)

M20 socket

Optional accessories:VRX-AF array frameSS4-BK Threaded satellite pole

powered

powered

The JBL ALL WEATHER Series features high power, lightweight, 2-way, full-range loudspeakers. Highly weather-resistant IP56 rating. Applications include sports facilities, racetracks, stadiums, themed entertainment venues, outdoor background music/paging systems, swimming pools etc.

JBL AE ALL WEATHER LOUDSPEAKERS

AWC82

8" coaxial loudspeaker

80 Hz – 20 kHz (-10dB)

200W program / 8Ω

100V: 200W, 100W, 50W

94 dB (1W/1m)


300 x 300 x 305 (H x W x Dmm)

2 x M10 points, M6 for safety

U Bracket included

Available in grey or black

AWC129

12" coaxial loudspeaker

80 Hz – 20 kHz (-10dB)

200W program / 8Ω

100V: 200W, 100W, 50W

96 dB (1W/1m)


402 x 402 x 445 (H x W x Dmm)

2 x M10 points, M6 for safety

U Bracket included


AW266 & AW295

12" 2-way high power speaker

AW266: 36 Hz – 20 kHz (-10dB)AW295: 43 Hz – 20 kHz (-10dB)

400W program / 8Ω

100V: 400W, 200W

95 dB (1W/1m)

AW266: 60° X 60° coverageAW295: 90° X 50° coverage

409 x 732 x 452 (H x W x Dmm)

2 x M10 points, 2 x M6 for stabilisation, 1 x M10 for safety

U Bracket included


AW526 & AW566 & AW595

15" 2-way high power speaker

35 Hz – 20 kHz (-10dB)

400W program / 8Ω

100V: 400W, 200W

98 dB (1W/1m)

AW526: 120° X 60° coverageAW566: 60° X 60° coverageAW595: 90° X 50° coverage

485 x 810 x 478 (H x W x Dmm)

2 x M10 points, 2 x M6 for stabilisation, 1 x M10 for safety

U Bracket included


NEW

INSTALLED AUDIO

INSTALLED AUDIO


NIGHTCLUB LOUDSPEAKERS

JBL MARQUIS DANCE CLUB SERIES

From thumping mega dance floors to tranquil VIP lounges, from eclectic chill rooms to complex sound booths, the Marquis Dance Club Series systematic loudspeaker designs are scalable to smaller venues, ultra lounges, and mega clubs alike.

MD2

High Power Mid-High Loudspeaker System

270Hz - 20 kHz

MF: 700 W; HF: 150 W

MF: 111 dB SPL; HF: 114 dB SPL

1142.8 x 844.8 x 508.5 mm

MD1

Dual JBL Selenium Super Tweeter

5.5 kHz - 20 kHz (-10dB)

200 W (Program above 5 kHz)

113 dB SPL

184.2 x 421.3 x 305.8 mm

MD3

High Power Dual 15" Low Frequency Loudspeaker

42 - 415 Hz

1600 W

107 dB SPL

1142.8 x 599.8 x 762.5 mm

MD52

Medium Power 90° x 50° 12” 2-Way Full Range Loudspeaker

39Hz - 20 kHz

400 W Passive Only

96 dB SPL

711.2 x 369.4 x 403.7 mm

MD46

High Power 60° x 40° Dual 15" 4-Way Full Range Loudspeaker System

42Hz - 20 kHz

LF: 2000 W / MF: 350 WHF: 100 W / ST: 100

LF: 101 dB SPL / MF: 108 dB SPLHF: 113 dB SPL / ST: 110 dB SPL

1524 x 561 x 657 mm

MD55

Medium Power 90° x 50° 15" 2-Way Full Range Loudspeaker

39 Hz - 20 kHz

500 W Passive Only

99 dB SPL

781.1 x 417.9 x 457.7 mm

MD49

High Power 90° x 50° Dual 15" 4-Way Full Range Loudspeaker System

42Hz - 20 kHz

LF: 2000 W / MF: 350 WHF: 100 W / ST: 100

LF: 101 dB SPL / MF: 108 dB SPLHF: 113 dB SPL / ST: 110 dB SPL

1524 x 561 x 657 mm

MD7

Ultra Long Excursion High Power Dual 18" Subwoofer

22 - 240Hz

4000 W

100 dB SPL(25 - 200 Hz)

762 x 1121.7 x 965.7 mm

Superb Architectural Design and Versatile ConfigurabilityThe Marquis Dance Club Series features stunning, high quality design that is fully complementary with premier club environments. Whether you choose to deploy their stunning architectural features into your overall aesthetic, or configure them into the background, their technical performance is specifically designed for dance clubs to ensure your patrons will be immersed in the soul and depth of the music regardless of where they are in your club. Their wide array of configurability ensures compatibility with the specific design goals, power requirements and coverage needs of any environment you envision. Rugged as well as versatile, the Marquis Dance Club Series is built to the highest professional standards to withstand continuous, demanding professional use and are covered in ruggedized cabinet coverings and durable metal grills that not only will blend in with your design vision, but will handle the nightly abuse of thousands of hours of electrifying sound.

NEW

INSTALLED AUDIO

INSTALLED AUDIO

» INSTALLED AUDIO / 4948 / INSTALLED AUDIO « MIXING CONSOLES MIXING CONSOLES

SOUNDCRAFT GB SERIES

As always with Soundcraft consoles, emphasis for the GB Series has been placed on operational simplicity, clear and intuitive layout and the highest possible audio performance. All GB Series consoles have GB30 Mic preamplifier and GB30 Equaliser designs. For ease of installation with the GB2R, the connector section is contained in a rotatable pod, allowing cable access from the top of the mixer if sat on a table-top, or from the rear when mounted in a 19” rack.

GB2R

12 or 16 Mono Ch

2 Stereo Ch

2 Groups

4 EQ bands

6 Aux sends

2 Returns

Direct Outputs

SOUNDCRAFT EPM & EFX SERIES

Low-cost high-performance mixers. EFX/EPM mixers bring Soundcraft sound quality, performance and value-for-money to a wide range of applications including recording, live sound, install and broadcast. Soundcraft has created an uncluttered and intuitive control surface that enhances the operator experience, with all the appropriate features for modern mixing applications.

SOUNDCRAFT MPMI & MFXI SERIES

Soundcraft’s MFX/MPM mixers are compact and ideally equipped for live sound applications including fixed installations, houses of worship and portable PA.MFX mixers have built-in 24-bit Lexicon processing, delivering 32 stunning reverb, delay and chorus effects.

ANALOG MIXING CONSOLES DIGITAL MIXING CONSOLES

MPMi MFXi

MPMI: 12 or 20 Mono chMFXI: 8, 12 or 20 Mono ch

2 Stereo ch

1 FX Processors (MFXI only)

2 Groups

3 EQ bands

3 Aux sends

MPMI : 1 Returns; MFXi: 3 Returns

RMK Optional 8, 20ch, Included 12ch

9U

EPM EFX

EPM 6, 8 or 12 Mono chEFX 8 or 12 Mono ch

2 Stereo ch

1 FX Processors (EFX only)

3 EQ Bands

2 Aux Sends

EPM: 1 Returns; EFX: 2 Returns

RMK Optional 8ch, Included 12ch

8U

SOUNDCRAFT SI EXPRESSION DIGITAL CONSOLE

SOUNDCRAFT SI PERFORMER DIGITAL CONSOLE

SIE1 SIE2 SIE3

16, 24 or 32 mono mic inputs

4 line inputs

Colour touch screen interface

66 channels to mix possible

Pre/Post selection per input per bus

AES in and out

Global mode encoders

GEQ on every bus

20 sub-group / aux busses

SIP2 SIP3

24 or 32 mono mic inputs

8 line inputs

80 channels to mix possible

LCR panning

Pre/Post selection per input per bus

AES in and out

DMX interface

GEQ on every bus

20 sub-group / aux busses

Powerful, intuitive digital live sound mixing with Lexicon® FX, signal processing from BSS®, dbx® and Studer®, and ViSi remote control. The ViSi Remote iPad® app allows remote control of console features from anywhere in thevenue, even enabling musicians to mix their own monitors on stage from multiple iPads.

Combining legendary Soundcraft sound quality with intuitive, analogue-style operation, Si Performer delivers built-in Lexicon FX, sophisticated 4-band fully parametric EQ and full dynamics processing, a comprehensive range of output options, flexible routing and grouping and remote iPad® control among a feature list that just won't be beaten. Excellent console for houses of worship and corporate AV events, any ‘single-operator’ application event in which sophisticated digital audio mixing is a pre-requisite can now be enhanced with integrated lighting control.

4 FX busses

8 Matrix busses

LR and C Mix busses

4 Stereo Lexicon Effects engines

Delay on inputs and outputs

4 Mute Groups

Freely assignable insert loops

Soundcraft FaderGlow™

64x64 channel option card slot

4 FX busses

8 Matrix busses

LRC Mix busses

4 Stereo Lexicon Effects engines

Delay on inputs and outputs

8 Mute & VCA Groups

Freely assignable insert loops

Soundcraft FaderGlow™

64x64 channel option card slot

SOUNDCRAFT DIGITAL STAGEBOXES

MSB Mini Stage Box

16 or 32 Ch

8 Returns (MSB-16)8 Returns + 4 AESEBU (MSB-32)

Cat5 (Ethercon) connectors

Included: Console card

Optional: Optical card option

CSB Compact Stage Box

32 Ch

16 Analog returns

Card options: Optical or Cat5

Optional: 8 Analog returns + 4 AESEBU panel. Other card options CobraNet, Aviom, ADAT and RockNet

More analog consoles Pg 82-83 More digital console details Pg 79-80

Jands catalogue 2013 14 installed audio

Documents

Transcript of Jands catalogue 2013 14 installed audio