James Holden Rider
1
JAMES HOLDEN : TECHNICAL RIDER James Holden to supply: - DJ Controllers - Laptop - Soundcard Promoter to supply: - 1x club mixer: Allen&Heath XONE 92 or Pioneer DJM800 ONLY (JAMES WILL USE 3x LINE IN CHANNELS, NEEDS 2 AVAILABLE AT START OF SET) - 4 x European power outlets or power board - 2 x high powered undistorted stage monitors powered by separate amplifier with volume control via the mixer's booth out Space required: - one side of the mixer: 12"x12" space (on top of a Technics with the lid on (or off) is ok) - other side of the mixer: 12"x12" space + space for laptop (14" Thinkpad). < 30cm clear space > < 80cm clear space on this side > on this side
-
Upload
hiero-nymus -
Category
Documents
-
view
33 -
download
0
description
james holden setup
Transcript of James Holden Rider
JAMES HOLDEN : TECHNICAL RIDER
James Holden to supply:
- DJ Controllers- Laptop- Soundcard
Promoter to supply:
- 1x club mixer: Allen&Heath XONE 92 or Pioneer DJM800 ONLY(JAMES WILL USE 3x LINE IN CHANNELS, NEEDS 2 AVAILABLE AT START OF SET)- 4 x European power outlets or power board- 2 x high powered undistorted stage monitors powered by separate amplifier with volume control via the mixer's booth out
Space required:
- one side of the mixer: 12"x12" space (on top of a Technics with the lid on (or off) is ok)- other side of the mixer: 12"x12" space + space for laptop (14" Thinkpad).
< 30cm clear space > < 80cm clear space on this side > on this side