Generated on: 05/12/2017 13:29

Stock No.

J32637MAZAK Integrex 70Y CNC 4 Axis Turning / Milling & Boring Centre.With Mazatrol T Plus Control.

Serial No. 138092

Year of Manufacture september 1998

Control Mazatrol T Plus

Turning length 3002 mm

Turning diameter 915 mm

Between centres 3000 mm

Swing over bed 915 mm

Swing over cross slide 770 mm

Spindle speeds 2 - 1300 rpm

Number of stations on turret 2

Spindle bore 118 mm

Z axis stroke 3055 mm

X axis stroke 745 mm

Y axis stroke 130 mm +/-

Feed rate cutting 5000 mm per minute

spindle taper BT 50

milling speed up to 2000 rpm

Input 380/3/50 60 hp

Hydraulic stroke of barrel 160 mm

3 jaw chuck 630 mm

Fitted with 60 station automatic toolchanger, 6 station boringbar toolchanger, tool probe, swarf conveyor, 1 xhydraulic steady, 1 x manual steady, quantity of

Page 1 of 11

Generated on: 05/12/2017 13:29

chuck jaws.

Features C, X, Y,& Z axis

Length floor area 34 ' x 14' x 10' / 10.36m x 4.26m x3.05m

Nett weight approx. 35000 Kgs

Location CONTACT

Price Contact Us

Page 2 of 11

Generated on: 05/12/2017 13:29 Page 3 of 11

Generated on: 05/12/2017 13:29 Page 4 of 11

Generated on: 05/12/2017 13:29 Page 5 of 11

Generated on: 05/12/2017 13:29 Page 6 of 11

Generated on: 05/12/2017 13:29 Page 7 of 11

Generated on: 05/12/2017 13:29 Page 8 of 11

Generated on: 05/12/2017 13:29 Page 9 of 11

Generated on: 05/12/2017 13:29 Page 10 of 11

Generated on: 05/12/2017 13:29 Page 11 of 11