Iuwne10 S05 L05

© 2008 Cisco Systems, Inc. All rights reserved. IUWNE v1.0—5-1

Cisco WCS Administration

Working with Maps


Maps Overview


Monitor > Maps > Campus


Monitor > Maps > Building


Monitor > Maps > Building > New Floor Area


Monitor > Maps > Building > New Floor Area > Add Access Points


Monitor > Maps > Building > New Floor Area > Add Access Points (Cont.)


Monitor > Maps > Building > Floor > Add Access Points > Go > OK > Save


Cisco WCS Prediction Versus Site Survey

Cisco WCS Prediction Planning tool creates heat map based on generic rules

Map editor can refine rules for more accurate heat map

Calibration can refine rules for more accurate location tracking

Site survey is a measured value.


Map Editor


Map Editor (Cont.)


Map Editor Before and After

Predictive coverage before adding walls

Predictive coverage after walls have been taken into consideration


Planning Tool


Planning Tool: Add AP


Generate Proposal


Summary

Maps are used to monitor the AP coverage and locate devices.

The first possible map level is a campus.

Inside a campus, buildings are defined.

Inside a building, floor maps can be added.

On each floor, APs can be positioned.

To enhance the heat map accuracy, the map editor can be used to define obstacles such as walls.

A planning tool is also available to plan new coverage.

Iuwne10 S05 L05

Technology

Transcript of Iuwne10 S05 L05