IuB Data Configuration

8/12/2019 IuB Data Configuration

1/22

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved

www.huawei.com

Internal

IuB

Data Configuration

Wireless Case and TrainingWRAN Training Team


2/22

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 2

1-IuB Data Configuration Overview

2-IuB NodeB configuration process using CME

3-IuB RNC configuration process


3/22


AbbreviationsCME Configuration Management Element

WBBPa WCDMA Baseband Process unit Type A

WRFU WCDMA Radio Filter Unit

UBFA Universal BBU Fan Unit Type A

UEIU Universal Environment Interface unit

UELP Universal E1/T1 Lighting Protection unit

UFLP Universal FE/GE Lighting Protection unitUPEU Universal Power and Environment Interface Unit

UTRP Universal Transmission Processing Unit

DCDU-01 Direct Current Distribution Unit-01

EXT Extending

MRRU Multi-carrier Remote radio unit

CPRI Common Protocol Radio Interface

NPSU NodeB Power Supply Unit

NPMU NodeB Power Monitoring Unit


4/22


1- IuB Data Configuration Overview

NodeB initial data configuration

Definition:

NodeB initial configuration is the process of preparing and configuring the data

after the NodeB hardware components are installed. The configuration is based

on the NodeB hardware components, network planning, and data negotiationbetween the NodeB and other equipment. After the configuration, a data

configuration file is generated.


5/22


Data Configuration Overview

Tool ---- WRAN CME:

A tool for NodeB initial configuration, provides an integrated

solution to RAN data configuration

This tool can be used for initial configuration and data

reconfiguration for the NodeB and the RNC

The GUI-based CME provides the operating platform for RAN

data configuration

The forth generation NodeB require the CME V100R008 version

Methods :

manually adding a NodeB

adding a NodeB through a template file

adding a NodeB through a existing configuration file


6/22


Data Configuration Overview

2- IuB NodeB configuration process using CME

Configuring

NodeB

Data

Step1:

Configuring Physical

Equipment

Step 2:

Configuring TransportStep3:

Configuring Local cell

The NodeB data configuration script name is NodeBCfg.xml


7/22HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 7

Procedure Configuring NodeB Physical Equipment

Physical Equipment Configuration

Create Logical and Physical NodeB

Used for BTS3900&A Used for DBS3900

Choose Macro NodeB Attribute

Add UL baseband

resource group Add

NPMUAdd

NEMU

Add

NPSU

End

Add UTRP

Add UTRP1~9

Add WMPT

Add WBBP

Add UPEA/UPEB B

Add BBU board

Add UEIU

Add RF

Chain/Ring

Add WRFU

Add MRRURHUB/PRRU

Add DL baseband

resource group

Add

UFAN

220V

Add BBU

B

Add RF

Chain/Ring

Add MRRU

RHUB/PRRU

APM30/100/200Add NPMU/NPSU

/NCMU

Antenna

Device


8/22


9/22


DBS3900 board configuration

Subrack

number

Subrack

typeSlot number Board type MML Command

0 BBU3900

03 WBBPx/UTRP ADD BRD

45 UTRP ADD BRD

67 WMPT ADD BRD

16 UBF ADD BRD

1819 UPEA/UPEB/UEIU ADD BRD

6 EXT 0 NEMU ADD BRD

7 NPSU 0 NPMUSET

PWRSYSCFG

8 NCMU 0 NCMUSET

PWRSYSCFG

20~254 RRU 0MRRU/PRRU/RH

UBADD RRU

Configuring Physical Equipment


10/22


Configuring Physical Equipment

DBS3900 equipment plane

Right-click the slot numbers, and configure related parameters based on prepared

data so as to add board information of the BBU.


11/22


The RF Configuration Rules of New NodeB

The mechanism of the RF board is the chain and ring mechanism in V200R010.

WRFU of BTS3900

RRU of DBS3900

The steps of configuration the RF board

1.ADD SUBRACK to add RFU cabinet.

2.ADD RRUCHAIN to add chain or ring.

3.SET RRUCHAINBRKPOS to set the break pointoptional)

4.ADD RRU to add WRFU/MRRU/PRRU

5.RMV RRUCHAINBRKPOS to cancel the break point

optional

Right-click the RRU chain to configure the previous five steps in CME software.


12/22


The Backup Mode of RF board

MRRU only support the cold backup mode

The backup mode should be configured in properties of the RRU chain/ring

The hot backup ring can not support the upper layer cascading

The RRUs are of the following types: MRRU, RHUB, PRRU, and WRFU

The RRU Chain of the distributed NodeB supports the configuration of threeRRU types: MRRU, RHUB, and PRRU

the RRU Chain of the macro NodeB supports the configuration of four RRU

types: MRRU, RHUB, PRRU, and WRFU


13/22


TransportConfiguration

Create NodeB

Add UTRP

Add FractionalATM

Add UNI LINKAdd IMA Group

Add WMPT

Add IMA Link

Add Treelink PVCAdd NCP/CCP/IPoA DeviceAdd ALCAP Add CES

Add AAL2 Path

Add Time SlotAcross

Add STM-1 Link

End

Configuring Transport over ATM

Configuring Transport


14/22


Configuring Transport over ATM

Adding NCP

Adding CCP

Adding ALCAP

Adding AAL2path

Adding Tree link PVC

Adding OMCH


15/22


Configuring Transport over IP

TransportConfiguration

Configure the IP Route

Configure the PPP

End

Configure the MLPPPConfigure the timeslot

Cross channelConfigure the Dev IP

Configure the Qos Optional

Configure the SCTP

Configure the IPCP

Configure the OM

Configure the IP Path


16/22


Configuring Transport over IP

Configure the PPP, MP, and Ethernet IP

In a single transport mode, configure one type of transport links.

In hybrid transport mode, configure E1 and FE transport links.

For E1 links, configure PPP or MP

For FE links, configure PPPoE or Ethernet IP

IP networkNodeB RNC

PDH/SDH

IP hybrid transmission


17/22


Configuring Local Cell

Procedure of Local Cell Configuration

Add

Site

Add

Sector

Add

Local

Cell

Local

cell


18/22


Configuring Local Cell Adding Site

Adding a site to the NodeB

Note

A site number within one

NodeB must be unique.

Adding Sector

Adding a sector to the NodeB

Note

A sector number must be unique within one NodeB

Configuring a sector is mainly configuring the corresponding

antenna and feeder system


19/22


Configuring Local Cell

Adding Local Cell

Adding a local cell to the NodeB

Note

Local Cell ID must be unique within thesame NodeB

Negotiated with the peer end RNC

Local Cell ID

Uplink Frequency Downlink Frequency


20/22


IuB RNC configuration process over ATM

Configuring the Physical Layer

Configuring the ATM Traffic Resources

Configuring the Control Plane of the Iub Interface

Configuring the Mapping Between Service Types and TransmissionResources

Configuring the User Plane of the Iub Interface

Configuring the OM Channel over the Iub Interface
http://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-96-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-100-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-101-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-102-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-102-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-103-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-104-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-104-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-103-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-102-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-102-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-101-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-100-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-96-u.html


21/22


IuB RNC configuration process over IP

Configuring the Physical Layer and Data Link Layer (over IP)

Configuring the Control Plane for the Iub Interface (over IP)

Configuring the Mapping Between Service Types and Transmission

Resources

Configuring the User Plane over the Iub Interface (over IP)

Configuring an OM Channel over Iub Interface (over IP)
http://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-106-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-111-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-112-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-112-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-113-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-114-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-114-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-113-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-112-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-112-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-111-u.htmlhttp://localhost:7890/pages/31184420/10/31184420/10/resources/mbsc/m-bsc-initial-configuration-guide/mbsc-8-106-u.html


22/22

Thank You

www.huawei.com

IuB Data Configuration

Documents

Transcript of IuB Data Configuration