I-TECH Subsea Bullseye / Slope Indicator

email: sales@icltech.co.uktel: +44 (0) 141 332 1331fax: +44 (0) 141 332 3129

I-TECH Subsea Bullseyes are slope indicators used to measure the incline angle of subsea structures and

equipment.

ICL Tech Ltd manufacture and export I-TECH Subsea Bullseyes worldwide. Based in Scotland (UK) and with over 30 years involvemenet in the Oil & Gas Industry,

ICL Tech have built up a loyal customer base that includes many major players in the industry.

I-TECH Subsea Bullseyes are pressure tested to 6000m (20,000ft) depth and with no recorded

service failures in over 30 years the I-TECH Subsea Bullseye is the proven solution for your subsea

application.

Incredibly strong all-polymer construction keeps weight low

Type tested to 6100m / 20,000ft

Range of stock sizes and measurement ranges avialable (see table below)

Customer specials and bespoke solutions available on request

Proven high quality, maintenance free solution for subsea incline monitoring

BOP StacksChristmas TreesFlex JointsHabitatsPipelinesManifoldsSuction PilesPLEMS / PLETSRisers

Accurate to ±0.25°

Diameter (D1) Dome Diamter (D2) Height to shoulder (H2)

Standard Stock Items *(custom/bespoke items manufactured to specification)

Overall Height (H1) Measurement Range WeightPart №

350.0mm 313.4mm 87.5mm102.5mm 0-15° 10.6kgICL/SI/350/15350.0mm 313.4mm 87.5mm102.5mm 0-10° 10.6kgICL/SI/350/10350.0mm 313.4mm 68.0mm83.0mm 0-7° 8.5kgICL/SI/350/7350.0mm 313.4mm 68.0mm83.0mm 0-5° 8.5kgICL/SI/350/5350.0mm 313.4mm 68.0mm83.0mm 0-2° 8.5kgICL/SI/350/2250.0mm 213.4mm 68.0mm83.0mm 0-7° 4.0kgICL/SI/250/7250.0mm 213.4mm 68.0mm83.0mm 0-5° 4.0kgICL/SI/250/5250.0mm 213.4mm 68.0mm83.0mm 0-2° 4.0kgICL/SI/250/2150.0mm N/A 60.5mm60.5mm 0-5° 1.2kgICL/SI/150/5100.0mm N/A 48.5mm48.5mm 0-7° 0.5kgICL/SI/100/7

2

34

1

Applications: D1

D2

H2H1

www.subseabullseye.com