Italo

External Lighting CatalogueOverview

Italobeautify your city

Because

design matters...

design

LED LIGHTINGmodel Italo3

To us, design is not just a matter of taste;it is an attitude with passion. Which is why we continue to recive the international recog-nition from lighting designers and architects.

Design is never an end in itself, but is always the expression of equality between form and function. In the search for the most intelligent solutions, we create lighting products of an exceptional quality that will provide lasting impression.

2

“Simplicity isthe ultimate

Leonardo Da Vinci

sophistication."

design

LED LIGHTINGmodel Italo4 5

Individuality means finding the right balancebetween the functionality and appearance that fits perfectly in your environment.However, it is the right choice of form that makes the very most of your decision.For instance, would you prefer pendant or side mounted fixture?We test our fixtures thoroughly in the AEC test center in combination with various brack-ets to make sure they all function perfectly. This gives you the security of knowing you can rely on our recommendations to provide you with right choice of pole, arm and fixture.

Wonderful spaces can be created in any environment. It is up to you if these are made.

LED LIGHTINGmodel Italo

mountings

76

ITALO is particularly notable for its pure, fresh appearance and elegant lines.The form allows the contrasts of round curves and flat edges to merge and perfectly blendin elegant harmony. The sculptured look ofthe fixture adds a very special touch to thethe enviroment.

This style speaks a clear, distinct language.There is no room here for the superfluous,for overstatement or exaggeration. Theunderstatement of the ITALO lines provides maximum scope for use. And thanks to their varying sizes, they will meet all your require-ments.

mountings

“It’s not what you look at that matters, it’s what you see.” Henry David Thoreau

LED LIGHTINGmodel Italo98

In times predominated by a striving for “more, faster, brighter, louder”, when experience is measured in terms of quantity rather than quality, it is good to witness a design which triumphs through on the strength of pure clar-ity and newest technological advances. Italo uncompromisingly shuns everything which is superfluous to requirements, drawing its in-spiration from the flowless leafs. A restrained approach provides for expansive results.

Intelligencemade visible...

Housing: Die cast aluminium

Ballast Compartment: Die cast aluminium

Heat sink Upper body die cast aluminum

Optic High efficiency metalized micro-reflectors (99.9% reflectivity)

Diffuser Tempered 4mm th. glass with silk print

Cable clamp Plastic M20x1.5 - IP68

Standard color Graphite (GPT), Red (RDT), Blue (BUT), White (WHT), Silver (SLT), Black (BLT)

LED LIGHTINGmodel Italo11

materials

POLESteel or aluminum poles in any variety you can imagine...

Tenon

Post top or side mounted option-bracket made of die cast alumi-num

FRAMEFrame and cover are made of die cast aluminum alloy.

CLOSURE

Closure latch made of extruded alu-minum with stainless steel spring.

HEAT SINK

Heat sink in die cast aluminum UNI EN 1706 with lamellar de-sign.

10

Leading innovationdedicated for results

Twist-lock type photocell receptacle

PHR - PHOTOCELL RECEPTACLE OPTION

ITALO SERIES

Italo is the result of an exploration into the simplification of forms, thought out in terms of maximum clarity. The design is reduced almost to pure sym-bol, where the aesthetic quality of materials are emphasised.

The radiator cover becomes the reminiscent of the forms found on site furniture objects.

LED LIGHTINGmodel Italo13

DETAILS

BIRD SPIKES OPTIONSteel spikes mounted on a specially design plate.

RADIATOR COVER

Protection against mechanical damage or for enhanced visual appearance.

12

Luminous flux regulation using PLC (pow-er line communication).Light reduction can be associated with punctual and remote monitoring of the individual device via the power line com-munication remote control. This option, used in conjunction with an LCU (Light Control Unit), makes it possible to control an individual lighting point, allowing the creation of customised lighting scenarios. More complex remote control panels can be used as part of a wireless or GSM/GPRS network, to remotely monitor the energy consumption of the system and provide fault indications as necessary without the need for on-site maintenanceprocedures.

PLM OPTION

Ordering sequence

(Model Name) + (Wattage plus Current) + (Desired Voltage) + (Optical System) + (Options) + (Color)

110÷277V 50/60Hz

Voltage:

Color:BLT - black texure

WHT - white texture

GPT - graphite grey

BLUT - blue texture

RDT - red texture

SLT - silver texture* - please remove letter T if flat finish is requested (not recommended)

Control system:DIM-FIX: Fixed and programmed current

DIM-AUTO: Automatic dimming profile with integrated timer

DIM-PROG: Automatic and programmable dimming profile

PLM: Conveyed wave (Power Line Management)

Optical unit:Solid state optical system madules 1, 2, 3, 4

Colour Temperature 4000K, 3000K

IES Type II, III, IV, V

Optical unit life:(Ta=25°C)

525 mA≥70.000h B20L80 (including critical failures)

≥100.000h L80, TM21

700 mA≥60.000h B20L80 (including critical failures)

≥100.000h L80, TM21

Options:PHR - Photocell Receptacle

HSS - House Side Shield

PLM - Frosted glass

PROTECTION AGAINST OVERVOLTAGE

A lighting device installed in a standard electrical system may be subjected to volt-age fluctuations and external disturbances due to different factors such as discontin-uous loads on the line, faults on the lines (upstream or downstream) and atmospher-ic electrical discharges (in outdoor installa-tions). In those LED installations where the electronic components are predominant, an adequate resistance to surges is synon-ymous with reliability and proper function-ality.Thanks to the research and the experimen-tation performed at our own laboratories, AEC offers its customers customized solu-tions according to every specific installa-tion.

CLASS I: protection up to 10kV.CLASS II: protection from 5kV up to 9kV.

For more information about the protection against overvoltage, please contact us or our local representative.

IP 66

14LED LIGHTINGmodel Italo15

technical sheet

14

OPTICAL SYSTEM

STE-M Suburban street optics

Gamma Angles

cd/klm

180 120

105

90

75

60

45

105

90

75

60

45

30 3015 150

100

100

200

300

400

500

Asymmetrical optic for street and highway lighting. Specific optic for roadways where the width is equivalent to the pole height.

STE-SSuburban street optics

Gamma Angles 180 120

105

90

75

60

45

105

90

75

60

45

30 3015 150

150

150

300

450

600

750 cd/klm

Asymmetrical optic for street and motorway lighting. Spe-cific optic for roadways where the width corresponds to 0,8 times the pole height.

STU-M Urban street optics

Gamma Angles 180 120

105

90

75

60

45

105

90

75

60

45

30 3015 150

150

150

300

450

600

750 cd/klm

Asymmetrical optic for street and cycle path lighting. Spe-cific optic for roadways where the width is equivalent to the pole height.

STU-S Urban street optics

Gamma Angles 180 120

105

90

75

60

45

105

90

75

60

45

30 3015 150

150

150

300

450

600

750 cd/klm

Asymmetrical optic for street and cycle path lighting. Spe-cific optic for roadways where the width corresponds to 0,8 times the pole height.

STWWide emission street optics

Gamma Angles 180 120

105

90

75

60

45

105

90

75

60

45

30 3015 150

90

90

180

270

360

450 cd/klm

Asymmetrical optic for wide streets and wet asphalt. Spe-cific optic for roadways wherethe width corresponds to 1,2 times the pole height.

SVStreet junctions optic

Gamma Angles 180 120

105

90

75

60

45

105

90

75

60

45

30 3015 150

150

150

300

450

600

750 cd/klm

Asymmetrical optic for mo-torway junctions and narrow street lighting. Specific optic for roadways where the width corresponds to 0,5 times the pole height.

DIMMING OPTIONS

LED technology offers easy and reliable light flux adjustment. The devices are equipped with an electronic power sup-ply capable of adjusting light emission by directly regulating the optical assembly LED input current. The standard version of the device issupplied with a constant LED input cur-rent of 525mA or 700mA.The following options are available:

DA (DIM-AUTO) OPTIONAutomatic light flux regulation

DAC OPTION (DIM-AUTO custom pro-file)The power supply is configured using a dimming profile totally customizable by the user (up to 5 levels in 4 steps).

PLM OPTIONLight flux regulation using power line communication

LCU OPTIONLight control unit

OPTIONS ON REQUEST:

D10 (DIM-10) OPTIONFlux adjustment via 1-10V analog control

DALI OPTION (Digital Addressable Light-ing Interface)Flux adjustment via digital interface

DB (DIM-BIP) OPTIONBi-power light flux adjustment with pilot cable

DR (DIM-REG) OPTIONLight flux adjustment with flux controllers

ADDITIONAL OPTIONS

FLC OPTIONLED light flux recovery

FR (FULL RANGE) OPTION - Extended in-put voltage range

FC (PHOTOCELl) OPTIONPossibility to install a twilight switch that allows to automatically turn the unit on at sunset and to turn it off at sunrise.

LED LIGHTINGmodel Italo1716

versions

Italo 1

ITALO 1 CHARACTERISTICS

Applications: Street lighting / Urban lighting / Parking.

Optic: STE-M/S: Asymmetrical optic for street lighting - suburban ap-plication (0F).STU-M/S: Asymmetrical optic for street and cycle path lighting - urban application (0F2H1).STW: Asymmetrical optic for wide roads and wet asphalts (0F).SV: Asymmetrical optic for narrow urban streets or road junc-tions (0F2H1).Colour temperature: 4000K (optional 3000K).CRI > 70.Photobiological safety class: EXEMPT GROUP.IES Classification: Full cut-off. Type: II / III / IV / V

Insulation class: II (I optional).

Protection degree: IP66.Impact protection: IK 08.

LED modules: removable

Tilt angle: Post-top: 0°, +5°, +10°, +15°, +20°.Bracket: 0°, -5°, -10°, -15°, -20°.

Weight: 8 kg | 17.6 lbs

EPA: Side: 0.05m2. (0.5 sq.f) | Top: 0.3m2 (1.9 sq.f)

Mounting: Arm or Post-top Ø33mm (1-3/8") ÷ Ø60mm.(2-3/8") Ø60mm (2-3/8") ÷ Ø76mm (3") (optional).

Ballast and LED tray: Removable

LED LIGHTINGmodel Italo1918

432 mm

| 17”

805 mm | 31 3/4”

615 mm | 24 1/4”

343 mm

| 13 1/2”

960 mm | 37 3/4”

514 mm

| 20 1/4”

1076 mm | 42 3/8”

151 mm

| 6”

122 mm

| 4 7/8”

115 mm

| 4 4/8”

919 mm | 36 1/8”

744 mm | 36 1/4”

Ø 76 | / 3”

260 mm

| 10 1/4”

960 mm | 37 7/8”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

805 mm | 31 5/8”

253 mm

| 10”

615 mm | 25 1/4”

306 mm

| 12”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

ELECTRICAL CHARACTERISTICS

• Power supply: 110÷277V - 50/60Hz.

• LED current: 525/700mA.

• Power Factor: >0.9 (at full load).

• Connection for cables featured by a maxi mum cross section of 4mm (5/16")

• Optional fuse.

• Optical unit lifetime (Ta: 25°C)525mA: >70.000hr B20L80(included critical failures);>100.000hr L80, TM-21;700mA: >60.000hr B20L80(included critical failures);>100.000hr L80, TM-21.

• Optical unit lifetime (Ta: 50°C)525mA: >60.000hr B20L80(included critical failures);>100.000hr L80, TM-21;700mA: >50.000hr B20L80(included critical failures);>100.000hr L80, TM-21.

• Available dimming options:DA: automatic dimming.DAC: customizable DA profile.PLM: power line communication light flux adjustment.

The tables below describe the flux and output power of the available versions. These parameters are necessary in order to guarantee a correct comparison of the luminaire performance. In particular, the luminaire efficiency (expressed in lm/W) must be calculated as the ratio between the output luminous flux of the luminaire and the power absorbed by the input power supply unit. For the sake of completeness the tables also show the data of the nominal flux and power of the used LED.

Note: The characteristics of the product listed above are subjected to change. They will have to be con-firmed in case of order. Values indicated in this technical sheet are to be considered rated values subject to a tolerance of +/-5%.

Data listed above are subject to change without notice. 1: Rated data obtained in laboratory.2: Rated data extrapolated from LED manufacturer datasheet.

432 mm

| 17”

805 mm | 31 3/4”

615 mm | 24 1/4”

343 mm

| 13 1/2”

960 mm | 37 3/4”

514 mm

| 20 1/4”

1076 mm | 42 3/8”

151 mm

| 6”

122 mm

| 4 7/8”

115 mm

| 4 4/8”

919 mm | 36 1/8”

744 mm | 36 1/4”

Ø 76 | / 3”

260 mm

| 10 1/4”

960 mm | 37 7/8”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

805 mm | 31 5/8”

253 mm

| 10”

615 mm | 25 1/4”

306 mm

| 12”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

432 mm

| 17”

805 mm | 31 3/4”

615 mm | 24 1/4”

343 mm

| 13 1/2”

960 mm | 37 3/4”

514 mm

| 20 1/4”

1076 mm | 42 3/8”

151 mm

| 6”

122 mm

| 4 7/8”

115 mm

| 4 4/8”

919 mm | 36 1/8”

744 mm | 36 1/4”

Ø 76 | / 3”

260 mm

| 10 1/4”

960 mm | 37 7/8”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

805 mm | 31 5/8”

253 mm

| 10”

615 mm | 25 1/4”

306 mm

| 12”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

Rated Luminaire Power¹(Ta=25°, VIN=110/230 Vac, W)³

modules525mA 700mA

STE-M/STE-S/STW Optic

1 20 26

2 41 54

3 59 77

4 77 102

modules STU-M/STU-S/SV Optic

1 15 20

2 30 40

3 45 59

4 59 79

versions

ITALO 2 CHARACTERISTICS

Applications: Street lighting / Urban lighting / Parking.

Optic: STE-M/S: Asymmetrical optic for street lighting - suburban ap-plication (0F).STU-M/S: Asymmetrical optic for street and cycle path lighting - urban application (0F2H1).STW: Asymmetrical optic for wide roads and wet asphalts (0F).SV: Asymmetrical optic for narrow urban streets or road junc-tions (0F2H1).Colour temperature: 4000K (optional 3000K).CRI > 70.Photobiological safety class: EXEMPT GROUP.IES Classification: Full cut-off. Type: II / III / IV / V

Insulation class: II (I optional).

Protection degree: IP66.Impact protection: IK 08.

LED modules: removable

Tilt angle: Post-top: 0°, +5°, +10°, +15°, +20°.Bracket: 0°, -5°, -10°, -15°, -20°.

Weight: 13 kg | 33 lbs

EPA: Side: 0.08m2. (0.86 sq.f) | Top: 0.3m2 (3.2 sq.f)

Mounting: Arm or Post-top Ø33mm (1-3/8") ÷ Ø60mm.(2-3/8") Ø60mm (2-3/8") ÷ Ø76mm (3") (optional).

Ballast and LED tray: Removable

Italo 2LED LIGHTINGmodel Italo20 21

ELECTRICAL CHARACTERISTICS

• Power supply:110÷277V - 50/60Hz.

• LED current: 525/700mA.

• Power Factor: >0.9 (at full load).

• Connection for cables featured by a maximum cross section of 4mmq.

• Optional fuse.

• Optical unit lifetime525mA: >70.000hr B20L80(included critical failures);>90.000hr L80, TM-21;700mA: >50.000hr B20L80(included critical failures);>70.000hr L80, TM-21.

• Available dimming options:DA: automatic dimming.DAC: customizable DA profile.PLM: power line communication light fluxadjustment.

The tables below describe the flux and output power of the available versions. These parameters are necessary in order to guarantee a correct comparison of the luminaire performance. In particular, the luminaire efficiency (expressed in lm/W) must be calculated as the ratio between the output luminous flux of the luminaire and the power absorbed by the input power supply unit. For the sake of completeness the tables also show the data of the nominal flux and power of the used LED.

Note: The characteristics of the product listed above are subjected to change. They will have to be con-firmed in case of order. Values indicated in this technical sheet are to be considered rated values subject to a tolerance of +/-5%.

Data listed above are subject to change without notice.1: Rated data obtained in laboratory.2: Rated data extrapolated from LED manufacturer datasheet.3: F and DA version at full load

432 mm

| 17”805 mm | 31 3/4”

615 mm | 24 1/4”

343 mm

| 13 1/2”

960 mm | 37 3/4”

514 mm

| 20 1/4”

1076 mm | 42 3/8”

151 mm

| 6”

122 mm

| 4 7/8”

115 mm

| 4 4/8”

919 mm | 36 1/8”

744 mm | 36 1/4”

Ø 76 | / 3”

260 mm

| 10 1/4”

960 mm | 37 7/8”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

805 mm | 31 5/8”

253 mm

| 10”

615 mm | 25 1/4”

306 mm

| 12”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

432 mm

| 17”

805 mm | 31 3/4”

615 mm | 24 1/4”

343 mm

| 13 1/2”

960 mm | 37 3/4”

514 mm

| 20 1/4”

1076 mm | 42 3/8”

151 mm

| 6”

122 mm

| 4 7/8”

115 mm

| 4 4/8”

919 mm | 36 1/8”

744 mm | 36 1/4”

Ø 76 | / 3”

260 mm

| 10 1/4”

960 mm | 37 7/8”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

805 mm | 31 5/8”

253 mm

| 10”

615 mm | 25 1/4”

306 mm

| 12”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

432 mm

| 17”

805 mm | 31 3/4”

615 mm | 24 1/4”

343 mm

| 13 1/2”

960 mm | 37 3/4”

514 mm

| 20 1/4”

1076 mm | 42 3/8”

151 mm

| 6”

122 mm

| 4 7/8”

115 mm

| 4 4/8”

919 mm | 36 1/8”

744 mm | 36 1/4”

Ø 76 | / 3”

260 mm

| 10 1/4”

960 mm | 37 7/8”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

805 mm | 31 5/8”

253 mm

| 10”615 mm | 25 1/4”

306 mm

| 12”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

Rated Luminaire Power¹(Ta=25°, VIN=110/230 Vac, W)³

modules525mA 700mA

STE-M/STE-S/STW Optic

4 79 105

5 98 131

6 118 158

7 138 -

8 158 -

modules STU-M/STU-S/SV Optic

4 59 79

5 74 99

6 89 119

7 103 138

8 118 158

Versions

ITALO 3 CHARACTERISTICS

Applications: Street lighting / Parking / Highways.

Optic: STE-M/S: Asymmetrical optic for street lighting - suburban ap-plication (0F). STW: Asymmetrical optic for wide roads and wet asphalts (0F).SV: Asymmetrical optic for narrow urban streets or road junc-tions (0F2H1).Colour temperature: 4000K (optional 3000K).CRI > 70.Photobiological safety class: EXEMPT GROUP.IES Classification: Full cut-off. Type II / III / V

Insulation class: II (I optional).

Protection degree: IP66.Impact protection: IK 08.

LED modules: removable

Tilt angle: Post-top: 0°, +5°, +10°, +15°, +20°. Bracket: 0°, -5°, -10°, -15°, -20°.

Weight: 18,5 kg / 41 lbs

EPA: Side: 0.1m2. (1.07 sq.f) | Top: 0.4m2. (4.3 sq f)

Mounting: Bracket or Post-top Ø60mm (2-3/8") ÷ Ø76mm (3")

Ballast and LED tray: Removable

Italo 3LED LIGHTINGmodel Italo

432 mm

| 17”

805 mm | 31 3/4”

615 mm | 24 1/4”

343 mm

| 13 1/2”

960 mm | 37 3/4”

514 mm

| 20 1/4”

1076 mm | 42 3/8”

151 mm

| 6”

122 mm

| 4 7/8”

115 mm

| 4 4/8”

919 mm | 36 1/8”

744 mm | 36 1/4”

Ø 76 | / 3”

260 mm

| 10 1/4”

960 mm | 37 7/8”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

805 mm | 31 5/8”

253 mm

| 10”

615 mm | 25 1/4”

306 mm

| 12”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

2322

ELECTRICAL CHARACTERISTICS

• Power supply:110÷277V - 50/60Hz.

• LED current: 525/700mA.

• Power Factor: >0.9 (at full load).

• Connection for cables featured by a maximum cross section of 4mmq.

• Optional fuse

• Optical unit lifetime525mA: >70.000hr B20L80(included critical failures);>90.000hr L80, TM-21;700mA: >50. 000hr B20L80(included critical failures);>70.000hr L80, TM-21.

• Available dimming options:DA: automatic dimming.DAC: customizable DA profile.PLM: power line communicationlight flux adjustment.

The tables below describe the flux and output power of the available versions. These parameters are necessary in order to guarantee a correct comparison of the luminaire performance. In particular, the luminaire efficiency (expressed in lm/W) must be calculated as the ratio between the output luminous flux of the luminaire and the power absorbed by the input power supply unit. For the sake of completeness the tables also show the data of the nominal flux and power of the used LED.

Note: The characteristics of the product listed above are subjected to change. They will have to be confirmed in case of order. Values indicated in this technical sheet are to be considered rated values subject to a toler-ance of +/-5%.

Data listed above are subject to change without notice.1: Rated data obtained in laboratory.2: Rated data extrapolated from LED manufacturer datasheet.

432 mm

| 17”

805 mm | 31 3/4”

615 mm | 24 1/4”

343 mm

| 13 1/2”

960 mm | 37 3/4”

514 mm

| 20 1/4”

1076 mm | 42 3/8”

151 mm

| 6”

122 mm

| 4 7/8”

115 mm

| 4 4/8”

919 mm | 36 1/8”

744 mm | 36 1/4”

Ø 76 | / 3”

260 mm

| 10 1/4”

960 mm | 37 7/8”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

805 mm | 31 5/8”

253 mm

| 10”

615 mm | 25 1/4”

306 mm

| 12”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

432 mm

| 17”

805 mm | 31 3/4”

615 mm | 24 1/4”

343 mm

| 13 1/2”

960 mm | 37 3/4”

514 mm

| 20 1/4”

1076 mm | 42 3/8”

151 mm

| 6”

122 mm

| 4 7/8”

115 mm

| 4 4/8”

919 mm | 36 1/8”

744 mm | 36 1/4”

Ø 76 | / 3”

260 mm

| 10 1/4”

960 mm | 37 7/8”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

805 mm | 31 5/8”253 m

m | 10”

615 mm | 25 1/4”

306 mm

| 12”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

Rated Luminaire Power¹(Ta=25°, VIN=110/230 Vac, W)³

modules525mA 700mA

STE-M/STE-S/STW Optic

9 177 236

10 197 263

11 217 289

12 236 315

13 256 -

14 276 -

15 295 -

modules STU-M/STU-S/SV Optic

9 133 -

10 148 198

11 162 217

12 177 237

13 192 257

14 207 277

15 221 296

“There is nothing like a dream to create the future.” Victor Hugo

DESIGN

LED LIGHTINGmodel Italo24 25

0

5

10

15

1

2

3

4

5

[ft][m]

1

2

3

4

5

6

7

8[m]

0

5

10

15

20

25

[ft]

0

5

10

15

20

25

[ft]

1

2

3

4

5

6

7

8[m]

20

0

5

10

15

25

30

35

40

45

1

2

3

4

5

6

7

8

9

10

11

12

13

14

[ft] [m]

0

5

10

15

[ft]

1

2

3

4

5

6[m]

0

5

10

15

20

1

2

3

4

5

6

7

[m] [ft]

0

5

10

15

1

2

3

4

5

[m] [ft]6

Italo 3 BX1 pole Italo 3 AS pole Italo 1 AX pole Italo 1 AP pole

Italo 1 DC pole Italo 1 DS pole

LED LIGHTINGmodel Italo

MOUNTINGS

2726

0

5

10

15

1

2

3

4

5

[ft][m]

1

2

3

4

5

6

7

8[m]

0

5

10

15

20

25

[ft]

0

5

10

15

20

25

[ft]

1

2

3

4

5

6

7

8[m]

20

0

5

10

15

25

30

35

40

45

1

2

3

4

5

6

7

8

9

10

11

12

13

14

[ft] [m]

0

5

10

15

[ft]

1

2

3

4

5

6[m]

0

5

10

15

20

1

2

3

4

5

6

7

[m] [ft]

0

5

10

15

1

2

3

4

5

[m] [ft]6

Italo 1 KC pole Italo 1 KW pole

Italo 2 PM poleItalo 2 PT pole Italo 2 SX pole Italo 2 LN pole

Italo 2 KD pole Italo 2 GY pole

LED LIGHTINGmodel Italo

MOUNTINGS

2928

...and much more is available

SLTColor: silverCode:GPT

Color: graphiteCode: BUT

Color: blueCode: BRT

Color: brownCode: GRT

Color: grayCode: BLT

Color: blackCode:

LED LIGHTINGmodel Italo

Colours

Italo is available in a range of standard and non-standard colors.

DDL8 - 8 step powder-coat processwith phosphochromate dipping resistant to corrosive and saline environments

Stage 1 Alk Clean

Stage 2 Rinse

Stage 3 Rinse

Stage 4 Chrome Phos

Stage 5 Rinse

Stage 6 Seal

Stage 7 Recirc DI

Stage 8 Fresh DI

Aluminum, like many non-ferrous and plas-tic substrates, requires a mild microscopic surface etch prior to coating to promote im-proved adhesion. This can be accomplished simply and safely, with the right chemistry additives in your pretreatment chemistry. The industry standard chemistries used to micro-scopically etch aluminum have been primari-ly acids such as Phosphoric, Sulfuric or Chro-mic acids, many times used in combination, somewhere in the pretreatment process with a fluoride containing additive to promote the etch. AEC uses the highest standard chemi-cals enviro-friendly to achieve the best pos-sible results.

The Seal is many times the last process ap-plied prior to a low conductivity, Deionized, Distilled or Reverse Osmosis conditioned wa-ter rinse. The purpose of the Seal process is to completely passivate and seal any micro-scopic voids on the surface from the environ-ment prior to coating. This helps to addition-ally improve adhesion and inhibit corrosion. The Seal process can be accomplished in many ways with today’s technological ad-vancements. In some of the latest pretreat-ment technologies, the seal and passivation steps are accomplished in a single step during the conversion coating application process. Tri-valent chrome (which is thought to be a safe alternative to the hexavalent chrome), non-chromic seal such as molybdate and other organic, inorganic and nano-polymer products are used depending on an applica-tion.

31

WHTColor: whiteCode: GNT

Color: greenCode: BNT

Color: navy blueCode: YLT

Color: yellowCode: RDT

Color: redCode:

30

AEC Illuminazione SLRVia A. Righi, 4Zona Ind.le Castelnuovo52010 - Subbiano - ArezzoItaly

Tel: +39 0575 041110 Fax: +39 0575 420878Web: www. aecilluminazione.com

AEC Illumination Corp3209 Orlando Dr.Mississauga, ON L4V 1C5Canada

Tel: +1 647.367.1607 Fax: +1 647.931.7878

Web: www. aecillumination.comE-mail: info@aecillumination.com

AEC Illumination Corp8136 Byron Rd. Suite GWhittier CA 90606USA

Tel: +1 949.296.2378Fax: +1 949.271.2314

Web: www. aecillumination.comE-mail: info@aecillumination.com

© AEC Lighting. Not to be reproduced wholly or in part without written permission. (Ed.6)