IT-Network Special Catalogue · 2010. 5. 18. · represented worldwide through a network of...
Transcript of IT-Network Special Catalogue · 2010. 5. 18. · represented worldwide through a network of...
IT-/NetworkSpecialCatalogue
Network RackServer RackThermal RackHeavy Load RackCompact RackStand-Alone EnclosureWall-MountingEnclosureCable ManagementSystem AccessoriesSocket StripsUPS SolutionsActive ComponentsRMS System@LockKVMTFT ConsolesThermal Management
IT-/NetworkSpecialCatalogueDataCentre Competence
Welcome to the catalogue.
This special catalogue will serve tohelp you with your selection and inpinpointing those products that youreally need to meet your requirementsin the Information Technology andNetwork and Server Technology area.
Knürr designs, produces and integratesstandardised and customised racksystems, enclosures, backplanes,thermal management, power supplysystems and applied components aswell as functional furnishing systems.
I
C O N T E N T
II
1 219” Rack
1.1miracelNetwork RackStrong pointsProductsAccessories
1.35miracelServer RackStrong pointsProductsAccessories
9 107 8
2.1smaractNetwork RackStrong pointsProductsAccessories
2.7smaractServer RackProductsAccessories
7.1DI-STRIPStrong pointsProducts
7.40SerimatProducts
8.1UPSStrong pointsProducts
10.1RMSStrong pointsProductsAccessories
10.7@LockStrong pointsProductsAccessories
9.1Electro-MechanicalComponentsProducts
19” Compact Rack
Socket StripsUninterruptiblePower Supplies
Electro-MechanicalComponents
ActiveComponents
1.51miracelCoolThermStrong pointsProducts
1.55MaxLoadStrong pointsProduct
III
3 4
13
3.1doubleprorackStrong pointsProductsAccessories
4.1ConActStrong pointsProductsAccessories
4.9SOHOStrong pointsProductsAccessories
NEW
Safety/Security
10.15KVMStrong pointsProductsAccessories
19” Enclosure 19” Wall Enclosure
Technical Section
13.1Communication/DataNetwork TechnologyStructureComponentsStandards /SpecificationsAreas of ApplicationTechnical Abbreviations
13.14Index
55.1Cable ManagementStrong pointsProducts
CableManagement 6
6.3Shelves
6.9Drawers
6.16Front Panels
6.20Telescopic Slides
6.23Mounting Material
System Accessories
11TFT 1212.1CoolBlast fan unitStrong pointsProductsAccessories
12.10Cooling SystemsStrong pointsProductsAccessories
Thermal Management
11.1TFTProductsAccessories
Tradition.
Quality is fashionable with a lot ofpeople; with us it has been tradition for over half a century.
Knürr is an international companywith a tradition that goes back over50 years.
Knürr made.
Profile.
Knürr AG is the leader in designing and manufacturing indoor and outdoor racksystems for telecommunications, electronics and computer equipment. Thecompany is based in Arnstorf (Lower Bavaria) and operates production sites onthree continents and is therefore present at central locations in the rackmanufacturing industry.Knürr supplies leading Original Equipment Manufacturers (“OEMs”) withmodified and customised solutions from these facilities on the basis ofstandardised products. These OEMs include well known names such asSiemens, Nortel, Comverse, Ericsson and Alcatel.
These companies have chosen Knürr as their preferred supply chain partner.And there are plenty of good reasons for this: The company’s global presence; the impressive design; the technicalknow-how and the standard product range; the customer-specific thermalmanagement and power supply products; the proven integration expertise;outstanding time-to-market results; and above all, Knürr’s unsurpassedquality.
Applications.
You can’t have everything! Unless, of course, you are with theright manufacturer of innovativeproducts. The applications portfolio at Knürr ispractically unique in its range anddepth. Tested, certified and patentedon numerous occasions.
• Thermal Management• Power Supply Management• Cable Management• ESD Management• Monitoring Management
Engineering.
Customer-specific solutions with an enormous scope arecharacteristic of Knürr.They feature a high degree oftechnical complexity and offer along life cycle.Features that are not coincidental,but rather which highly-qualifiedKnürr specialists work hard toproduce.
• Supply Chain Management• Applications• Project Management• Prototype Production• Assembling Management• System Engineering• Configuration Management• Specification Management• Installation Management• Documentation Management• Test Procedure and Certification• Logistics
IV
Knürr Highlights at a Glance...
Global presenceIn order to best serve its OEM customers around the globe, Knürr isrepresented worldwide through a network of subsidiaries, licenceesand distributors. Design, production and assembly of Knürr productstake place in eight own and leased facilities. Strategic partnerships arein place at four further sites, where products are also manufactured.On the basis of its flexible outsourcing model, Knürr can very quicklyincrease production volumes as required. Beyond the scope of ourEuropean presence, the company is also strongly represented inproduction in the most important low cost countries, including China,Brazil and Eastern Europe. Management continuously evaluatespossibilities to expand Knürr’s presence in North America and Chinaeven further.
Modified and customer-specific solutions based onstandardised product ranges Knürr provides its customers with a clearly structured range of indoorand outdoor rack systems. The company specialises in large metalracks, especially on basic stations for wireless networks. The basis of Knürr’s modified and customer-specific solutions areits standardised product platforms. This shortens time-to-marketand often presents the customer with the most cost-effective solution.Knürr also equips its racks with its own thermal management andpower supply systems, which are available in standard version or aredeveloped according to customer requests.Knürr additionally provides technical workshops that are primarily bought by customers who also look to Knürr for their rack systems.
Design, technical and integration servicesKnürr product design and technical expertise rank among the bestin the world and qualify the company as a provider of complete solutionsfor its customers.Knürr currently employs over 70 engineers and designers and hasalready registered some 500 patents. Due to its diverse designexperience, the company can rapidly adapt its standard range ofproducts to the exact specifications of its customers.The procedure for adjusting to customer requirements is simplifiedwith the use of customer-specific components, such as thermalmanagement and power supply.The Knürr core competencies reach far beyond the design andmanufacture of rack systems. Management constantly appliesitself to the extension of high-grade services, which are offered tothe customer in the systems integration area.
V
VI
Rapid Service
Express itemSwift express delivery service,smooth ordering process,attractive pricing and a market-oriented offer – that’s Knürrreliability!
Each express item that ismarked accordingly in thiscatalogue, leaves ourEuropean central store24 hours after your order isreceived. High-grade qualityand standardised solutionsthat always leave you thatdecisive step ahead of thecompetition!
Global sales offices whereexpert application techniciansand sales engineers specifi-cally apply themselves to yourspecial requirements andpersonally advise you are alsoavailable for you around theworld.Don’t hesitate in using themto your advantage!
Express itemin 24 hours ex plant:
With Knürr you arealways ahead
of the competition
IT/Networkand ServerTechnology
VII
E N V I R O N M E N T S FO R E L E CT R O N I C S
Computer centremiracel Server Racks
E N V I R O N M E N T S F O R E L E C T R O N I C S
VIII
Application Service Providingmiracel Indoor Rack
Orderly cable managementmiracel Indoor Rack
Server racksAs individual asour customers:miracel Indoor Rack
smaractThe innovative compactrack for every occasion.Outside small.Inside, pretty big!
ConActThe proven wall-
mounting enclosure
doubleprorackMulti-functional 19”
enclosure
tecoras - ETSExcellent for
telecommunications
IX
tecorasSystem range fortelecommunications
Indoor RackMobile com-municationsbase station
End controlPerformance test on ETS systemracks in plant test area
Internal test procedureNational and international safetycertification standards
tecorasOutdoor Base Station
E N V I R O N M E N T S F O R E L E C T R O N I C S
X
cs 200719” Heavy duty plug-in unit
chasseleon19” Plug-in unit
ATCA19” Modular chassis
primus19” Modular chassis
XI
PCIPre-configuredsolutions
UPSUninterruptible power supply
RAID SystemsFor everyrequirement
E N V I R O N M E N T S F O R E L E C T R O N I C S
XII
RMS compactNew option for systemmonitoring
@LockElectronic locking systems
TFT DrawerSpace-saving andergonomic
XIII
KVMConsole switching systems
tecoras - UPSBatteries provide uninterruptiblepower supply
tecoras - UPSAC/DC distribution
CoolBlast fan unitTechnically refinedventilation systems
DI-STRIPKnürr socket stripsalso for 19” use
E N V I R O N M E N T S F O R E L E C T R O N I C S
XIV
Traffic control centreDeutsche Bahn AG, operations centrein Frankfurt/Main
Process control stationPusher-type furnace, Salzgitter AG.In dacobas set-up
Security command workstationOperations control stations forsafety/security systems
WorkstationSystems
XV
Mobile WorkstationsIn practice
Mobile workstationsAs useful assistant at theworkstation
E N V I R O N M E N T S F O R E L E C T R O N I C S
XVI
1miracelNetwork Racks 1.2 to 1.34
Server Racks 1.35 to 1.50
CoolTherm 1.51 to 1.54
1.1
1 9 ” R A C K
19” NetworkRackmiracelStrong points 1.3
miracel NS 25Distribution Rack 1.6
miracel NS 26Distribution Rack 1.7
miracel NS 19.8Distribution Rack 1.8
miracel NS 19.6Distribution Rack 1.9
miracel NS 19.8 DDistribution RackWith swing frame 1.10
miracel NG 800Network Equipment Rack 1.11
miracel NO 19Lab Rack 1.12
miracel AccessoriesRack Connector 1.13Extrusions 1.14HU Tape Measure 1.15Swing Frame 1.16Design Doors 1.18Doors 1.21Plinth 1.24Bottom Cover 1.26Locking Set 1.27Earthing Set 1.27Side Panel 1.28Rear Panel 1.29Top Cover 1.30Fan Units 1.32Front Panel, Adjustable 1.34
MIR001391
1 9 ” R A C K
1.2
MIR00528
1.3
1 9 ” R A C K
Modular constructionSimple mounting, including allnon-standard components -variable and in the integrated19” or 25 mm increments.
Forward-thinkingSecurity for the future andflexibility with integration of19” and metric technology.
Expandable at all timesSystem expansions can be easilyimplemented while maintainingthe IP protection rating.
3
2
1 Cable managementGuaranteed orderly and space-saving cable management.Adjustment at installation site,cable management can be selec-ted from extensive range ofaccessory components.
Flexible ventilation componentsThe correct ventilation solution isalways provided by the corre-sponding selection of accessorycomponents. This allows the air-flow to be specially adapted tothe built-in components. Throughthe perforated bottom covers, topcovers and doors, for example.
5
4
miracelStrong points
MIR201222
TEC000283
MIR001434
MEC200844
MIR004274
MIR200525
MIR202655
LUF200285
1 9 ” R A C K
1.4
Front doors
Side panel Vent lid
Rear panel
Vertical extrusion(T-slot/mounting holes)
19” Swing frame
Basic rack
Trim extrusions
Side panelMultifunctional strut
Rack bottom cover
Rack plinth, mobile
Rack plinth, stationary
Rack bottom cover group
MIR00145
1.5
1 9 ” R A C K
W W1 X
[mm] [mm] [mm]
600 535 485
700 635 585
800 735 685
900 835 785
D D1 Y
[mm] [mm] [mm]
600 530 485
800 730 685
900 830 785
1000 930 885
1200 1130 1085
Material- Extruded aluminium- Corner piece, die-cast
aluminium- Covers, sheet steel,
zinc passivated- Doors, sheet steel or with
single safety glass panel,4 mm or 6 mm (double doors)
Installation dimensions inaccordance with IEC 297-3 andIEC 917- Height: 23 HU / 37 HU / 41 HU /
46 HU(1 HU (or 1U) = 44.45 mm)66 module / 74 module / 82module(1 module = 25 mm)
- Width: 482.6 mm(19” construction)535 mm (20” module construc-tion)
Space solution- 82% of the basic surface can be
used as space for installationand cable routing
- Front jumpering space, 123 mmor 73 mm
- Door opening angle, 180°
Configurations- Stationary, on levelling feet- Stationary with plinth- Mobile with plinth and snib
Finish / Colour- Basic rack, polished- Door trim, black, RAL 9011
- Visible surface of the covers,powder-coated,light-grey RAL 7035 ordark-grey RAL 7021
Static load rating- 5000 N with stationary version- 3000 N with mobile plinth
Heat transferPower loss with- Closed top cover, up to 500 W- Vent lid, up to 700 W
Tests according to model- Vibration test in accordance
with MIL-STD 810 E- IP test in accordance with
IEC 529- UL test 1244- NEMA 12 Standard- EMC shielding attenuation in
accordance with MIL-STD 285(10 MHz - 30 MHz) and VG 95 373 Part 15 (30 MHZ-1GHz)
- Vibration and shock test inaccordance with ETS 300 019
- Seismic test, Bellcore (NEBS)TR-NWT 000063 Zone 4
- Earthing, VDE 0 100 T 540
Further standards and tests onrequest.
Rack suitesTo create a rack suite with num-ber of racks “n”, you require:- n-1 racks without side panels
and 1 rack with side panels- In a rack suite, per connection
you require one set of suiteconnectors
miracel 19” RackTechnical data
Vertical extrusion with mounting holesSteel for 19” racks
MIR
0030
9
19” Server extrusion
MIR
2004
1
Vertical extrusion with T-slotAluminium for 19” construction
MIR
0030
7
Vertical extrusion with T-slotAluminium for metric construction, 20 module
MIR
0030
8
Vertical extrusion with mounting holesAluminium for 19” racks
MIR
2027
1
MIR00332
1 9 ” R A C K
1.6
miracel 19” Distribution Rack, NS 25Width 800, front glass door, T-slot extrusions
W H D HU/U h d kg Model Order no. UP
800 2120 600 41 1852 365 112 side panels/RAL 7035 01.136.044.1 1 unit
800 2120 600 41 1852 365 112 side panels/RAL 7021 01.136.044.8 1 unit
800 2120 800 41 1852 565 120 side panels/RAL 7035 01.136.050.1 1 unit
800 2120 800 41 1852 565 120 side panels/RAL 7021 01.136.050.8 1 unit
800 2320 800 46 2052 565 130 side panels/RAL 7035 01.136.051.1 1 unit
800 2320 800 46 2052 565 130 side panels/RAL 7021 01.136.051.8 1 unit
800 2120 900 41 1852 665 124 side panels/RAL 7035 01.136.056.1 1 unit
800 2120 900 41 1852 665 124 side panels/RAL 7021 01.136.056.8 1 unit
800 2320 900 46 2052 665 134 side panels/RAL 7035 01.136.057.1 1 unit
800 2320 900 46 2052 665 134 side panels/RAL 7021 01.136.057.8 1 unit
800 2120 1000 41 1852 740 140 side panels/RAL 7035 01.127.970.1 1 unit
800 2120 1000 41 1852 740 140 side panels/RAL 7021 01.127.970.8 1 unit
800 2120 600 41 1852 365 103 no side panels/RAL 7035 01.136.244.1 1 unit
800 2120 600 41 1852 365 103 no side panels/RAL 7021 01.136.244.8 1 unit
800 2120 800 41 1852 565 109 no side panels/RAL 7035 01.136.250.1 1 unit
800 2120 800 41 1852 565 109 no side panels/RAL 7021 01.136.250.8 1 unit
800 2120 900 41 1852 665 118 no side panels/RAL 7035 01.136.256.1 1 unit
800 2120 900 41 1852 665 118 no side panels/RAL 7021 01.136.256.8 1 unit
800 2120 1000 41 1852 740 128 no side panels/RAL 7035 01.127.975.1 1 unit
800 2120 1000 41 1852 740 128 no side panels/RAL 7021 01.127.975.8 1 unit
- With fixed 19” installation on the front andrear for components in accordance withIEC 297-3
- Installation of chassis rails and19” shelves possible
- Flexible mounting of components with T-slot- Cable entry via plinth and top cover- Heat loss discharge via vent lid- Door opening angle, 180°
Jumpering spaceFront, 123 mm
Load rating5000 N static
Protection ratingIP 40 (upgradeable to IP 55)
Tests- Earthing in accordance with
VDE 0100 T 540- Shock and vibration test in accordance
with MIL-STD 810 E- IP test in accordance with DIN 40 050 /
IEC 529
Material / Finish- Basic rack, extruded aluminium,
polished- Corner piece, die-cast aluminium,
polished- Covers, zinc-passivated sheet steel,
powder-coated texture- Doors, sheet steel, powder-coated
texture- Glass infill, front door, single safety
glass panel, 4 mm- Multifunctional strut, sheet steel,
zinc-passivated
ColourFinal digit of order number .1:- Door trims, RAL 9011 black- Visible surface of the covers,
RAL 7035 light-greyFinal digit of order number .8:- Door trim, RAL 9011 black- Visible surface of the covers, dark-grey
RAL 7021
Supply schedule1 Basic rack4 Aluminium vertical extrusions with
T-slot and increment slide for springnut M5
2 Multifunctional struts for cable clam-ping and universal mounting options
2 Side panels with quick connectors1 Top cover with vent lid and integrated
cable entry1 Front door, single, single safety glass
panel, with handle and mounting forcylinder lock
1 Rear door, single, sheet steel, withhandle and mounting for cylinder lock
1 Plinth for cable management on theside and rear with levelling feet(0-25 mm)
2 Plinth trims for front and rear, with ventslots and fixing for filter mat
2 Plinth trims, closed1 Complete earthing set (VDE 0100)
How suppliedAssembled
MIR20004
MIR20004
MIR00470
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1.7
1 9 ” R A C K
MIR20223
MIR20223
miracel 19” Distribution Rack, NS 26Width 800, front glass door, mounting hole extrusions
W H D HU/U h d kg Model Order no. UP
800 2000 600 42 1900 365 108 side panels/RAL 7035 01.136.274.1 1 unit
800 2000 600 42 1900 365 108 side panels/RAL 7021 01.136.274.8 1 unit
800 2000 800 42 1900 565 116 side panels/RAL 7035 01.136.280.1 1 unit
800 2000 800 42 1900 565 116 side panels/RAL 7021 01.136.280.8 1 unit
800 2200 800 47 2100 565 126 side panels/RAL 7035 01.136.281.1 1 unit
800 2200 800 47 2100 565 126 side panels/RAL 7021 01.136.281.8 1 unit
800 2000 900 42 1900 665 120 side panels/RAL 7035 01.136.286.1 1 unit
800 2000 900 42 1900 665 120 side panels/RAL 7021 01.136.286.8 1 unit
800 2200 900 47 2100 665 120 side panels/RAL 7035 01.136.287.1 1 unit
800 2200 900 47 2100 665 120 side panels/RAL 7021 01.136.287.8 1 unit
800 2000 600 42 1900 365 99 no side panels/RAL 7035 01.136.300.1 1 unit
800 2000 600 42 1900 365 99 no side panels/RAL 7021 01.136.300.8 1 unit
800 2000 800 42 1900 565 105 no side panels/RAL 7035 01.136.306.1 1 unit
800 2000 800 42 1900 565 105 no side panels/RAL 7021 01.136.306.8 1 unit
800 2000 900 42 1900 665 116 no side panels/RAL 7035 01.136.312.1 1 unit
800 2000 900 42 1900 665 116 no side panels/RAL 7021 01.136.312.8 1 unit
- With fixed 19” installation on the front andrear for components in acc. with IEC 297-3
- Installation of chassis rails and19” shelves possible
- Door opening angle, 180°
Jumpering spaceFront, 123 mm
Load rating5000 N static
Protection ratingIP 40 (upgradeable to IP 55)
Tests- Earthing in accordance with
VDE 0100 T 540- IP test in acc. with DIN 40 050 / IEC 529
Material / Finish- Basic rack, extruded aluminium,
polished- Corner piece, die-cast aluminium,
polished- Covers, zinc-passivated sheet steel,
powder-coated texture- Doors, sheet steel, powder-coated
texture, glass infill, front door, singlesafety glass panel, 4 mm
- Multifunctional struts and 19”extrusions, sheet steel, zinc-passivated
ColourFinal digit of order number .1:- Door trim RAL 9011 black- Visible surface of the covers, RAL
7035 light-greyFinal digit of order number .8:- Door trims, RAL 9011 black- Visible surface of the covers, dark-grey
RAL 7021
Supply schedule1 Basic rack4 19” Vertical extrusions, sheet steel with
mounting holes2 Multifunctional struts for cable clam-
ping and universal mounting options2 Side panels with quick connectors1 Top cover with integrated cable entry1 Front door, single, single safety glass
panel, with handle and mounting forcylinder lock
1 Rear door, single, sheet steel, withhandle and mounting for cylinder lock
1 Complete earthing set (VDE 0100)4 Levelling feet
How suppliedAssembled
Note- Not available with double doors- Not available with bottom covers
MIR00467
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1 9 ” R A C K
1.8
MIR00607
miracel 19” Distribution Rack, NS 19.8Width 800, front glass door
W H D HU/U h d kg Model Order no. UP
800 1320 600 23 1052 435 78 Glass door, side panel 01.135.001.1 1 unit
800 1920 600 37 1652 435 103 Glass door, side panel 01.135.003.1 1 unit
800 2120 600 41 1852 435 112 Glass door, side panel 01.135.004.1 1 unit
800 2320 600 46 2052 435 121 Glass door, side panel 01.135.005.1 1 unit
800 1320 800 23 1052 635 80 Glass door, side panel 01.135.019.1 1 unit
800 1920 800 37 1652 635 111 Glass door, side panel 01.135.021.1 1 unit
800 2120 800 41 1852 635 120 Glass door, side panel 01.135.022.1 1 unit
800 2320 800 46 2052 635 129 Glass door, side panel 01.135.023.1 1 unit
800 1320 600 23 1052 435 70 Glass door, no side panel 01.135.007.1 1 unit
800 1920 600 37 1652 435 95 Glass door, no side panel 01.135.009.1 1 unit
800 2120 600 41 1852 435 103 Glass door, no side panel 01.135.010.1 1 unit
800 2320 600 46 2052 435 112 Glass door, no side panel 01.135.011.1 1 unit
800 1320 800 23 1052 635 73 Glass door, no side panel 01.135.025.1 1 unit
800 1920 800 37 1652 635 101 Glass door, no side panel 01.135.027.1 1 unit
800 2120 800 41 1852 635 109 Glass door, no side panel 01.135.028.1 1 unit
800 2320 800 46 2052 635 118 Glass door, no side panel 01.135.029.1 1 unit
800 1320 800 23 1052 635 80 Double glass door, side panel 01.135.037.1 1 unit
800 1920 800 37 1652 635 111 Double glass door, side panel 01.135.039.1 1 unit
800 2120 800 41 1852 635 120 Double glass door, side panel 01.135.040.1 1 unit
800 2320 800 46 2052 635 121 Double glass door, side panel 01.135.041.1 1 unit
800 1320 800 23 1052 635 73 Double glass, no side panel 01.135.043.1 1 unit
800 1920 800 37 1652 635 101 Double glass, no side panel 01.135.045.1 1 unit
800 2120 800 41 1852 635 109 Double glass, no side panel 01.135.046.1 1 unit
800 2320 800 46 2052 635 118 Double glass, no side panel 01.135.047.1 1 unit
- With fixed 19” installation on the front forcomponents in accordance with IEC 297-3
- Flexible mounting of components usingT-slot
- Cable entry via plinth and top cover- Heat loss discharge via vent lid- Door opening angle, 180°
Jumpering spaceFront, 123 mm
Load rating5000 N static
Protection ratingIP 40 (upgradeable to IP 55)
Tests- Earthing in accordance with
VDE 0100 T 540- Shock and vibration test in acc. with
MIL-STD 810 E- IP test in acc. with DIN 40 050 / IEC 529
Material / Finish- Basic rack, extruded aluminium,
polished- Corner piece, die-cast aluminium,
polished- Covers, zinc-passivated sheet steel,
powder-coated texture- Doors, sheet steel, powder-coated
texture, glass infill, front door, singlesafety glass panel
- Multifunctional struts, sheet steel,zinc-passivated
Colour- Door trim RAL 9011 black- Visible surface of the covers,
RAL 7035 light-grey
Supply schedule1 Basic rack2 19” aluminium vertical extrusions with
T-slot and increment slide for springnut M5
2 Multifunctional struts for cable clam-ping and universal mounting options
1 Top cover with vent lid and integratedcable entry
1 Front door, single or double, singlesafety glass panel, with handle andmounting for cylinder lock
1 Rear door, single or double, sheet steel,with handle and mounting for cylinderlock
2 Side panels with quick connectors(according to model)
1 Plinth for cable management on theside and rear with levelling feet(0-25 mm)
2 Lateral plinth trims, closed (accordingto model)
2 Plinth trims for front and rear, with ventslots and fixing for filter mat
1 Complete earthing test (VDE 0100)
How suppliedAssembled
MIR00469
MIR00607
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1.9
1 9 ” R A C K
Distribution Rack, NS 19.6Width 600, with front glass doors
W H D HU/U h d kg Model Order no. UP
600 1320 600 23 1052 435 72 side panel 01.135.109.1 1 unit
600 1920 600 37 1652 435 95 side panel 01.135.111.1 1 unit
600 2120 600 41 1852 435 103 side panel 01.135.112.1 1 unit
600 2320 600 46 2052 435 112 side panel 01.135.113.1 1 unit
600 1320 800 23 1052 635 74 side panel 01.135.127.1 1 unit
600 1920 800 37 1652 635 102 side panel 01.135.129.1 1 unit
600 2120 800 41 1852 635 110 side panel 01.135.130.1 1 unit
600 2320 800 46 2052 635 119 side panel 01.135.131.1 1 unit
600 1320 600 23 1052 435 68 no side panel 01.135.115.1 1 unit
600 1920 600 37 1652 435 94 no side panel 01.135.117.1 1 unit
600 2120 600 41 1852 435 99 no side panel 01.135.118.1 1 unit
600 2320 600 46 2052 435 106 no side panel 01.135.119.1 1 unit
600 1320 800 23 1052 635 68 no side panel 01.135.133.1 1 unit
600 1920 800 37 1652 635 94 no side panel 01.135.135.1 1 unit
600 2120 800 41 1852 635 99 no side panel 01.135.136.1 1 unit
600 2320 800 46 2052 635 106 no side panel 01.135.137.1 1 unit
MIR00056
- With fixed 19” installation on the front forcomponents in acc. with IEC 297-3
- Flexible mounting of components usingT-slot
- Cable entry via plinth and top cover- Heat loss discharge via vent lid- Door opening angle, 180°
Jumpering spaceFront, 123 mm
Load rating5000 N static
Protection ratingIP 40 (upgradeable to IP 55)
Tests- Earthing in acc. with VDE 0100 T 540- Shock and vibration test in acc. with
MIL-STD 810 E- IP test in acc. with DIN 40 050 / IEC 529
Material / Finish- Basic rack, extruded aluminium,
polished- Corner piece, die-cast aluminium,
polished- Covers, zinc-passivated sheet steel,
powder-coated texture- Doors, sheet steel, powder-coated
texture, glass infill, front door, singlesafety glass panel, 4 mm
- Multifunctional struts, sheet steel,zinc-passivated
Colour- Door trim, RAL 9011 black- Visible surface of the covers,
RAL 7035 light-grey
Supply schedule1 Basic rack2 19” aluminium vertical extrusions with
T-slot and increment slide for springnut M5
2 Multifunctional struts for cable clam-ping and universal mounting options
1 Top cover with vent lid and integratedcable entry
1 Front door, single, single safety glasspanel, with handle and mounting forcylinder lock
1 Rear door, single, sheet steel, withhandle and mounting for cylinder lock
2 Side panels with quick connectors1 Plinth for cable management on the
side and rear with levelling feet(0-25 mm)
2 Lateral plinth trims, closed2 Plinth trims for front and rear, with vent
slots and fixing for filter mat1 Complete earthing test (VDE 0100)
How suppliedAssembled
MIR00031
MIR00116
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1 9 ” R A C K
1.10
- With 19” swing framefor components in acc. with IEC 297-3
- Cable entry via plinth and top cover- Heat loss discharge via vent lid- Door opening angle, 180°
Load rating800 N static
Protection ratingIP 40 (upgradeable to IP 55)
Tests- Earthing in acc. with VDE 0100 T 540- Shock and vibration test in acc. with
MIL-STD 810 E- IP test in acc. with DIN 40 050 / IEC 529
Material / Finish- Extruded aluminium- Corner piece die-cast aluminium- Covers, zinc-passivated sheet steel,
powder-coated texture- Doors, sheet steel, powder-coated
texture, glass infill, front door, singlesafety glass panel, 4 mm
- Swing frame, sheet steel, powder-coated,front board support, zinc-passivated
- Multifunctional struts and 19” swingframe, sheet steel, zinc-passivated
Colour- Door trim, RAL 9011 black- Visible surface of the covers,
RAL 7035 light-grey
Supply schedule1 Basic rack1 19” swing frame with mounting holes
for caged nuts M52 Multifunctional struts for cable clam-
ping and universal mounting options1 Cover with vent lid and integrated cable
entry1 Front door, single, single safety glass
panel, with handle and mounting forcylinder lock
1 Rear panel with quick connectors2 Side panels with quick connectors1 Plinth for cable entry on the side and
rear with levelling feet (0-25mm)2 Plinth trims for front and rear, with vent
slots and fixing for filter mat1 Complete earthing test (VDE 0100)
How suppliedAssembled
miracel 19” Distribution Rack with Swing Frame, NS 19.8 DWidth 800, with front glass door, single
W H D HU/U h d kg Model Order no. UP
800 1320 600 20 892.7 435 77 side panels 01.135.271.1 1 unit
800 1920 600 33 1470.5 435 102 side panels 01.135.273.1 1 unit
800 2120 600 38 1692.8 435 111 side panels 01.135.274.1 1 unit
800 2320 600 42 1870.6 435 120 side panels 01.135.275.1 1 unit
800 1320 800 20 892.7 635 79 side panels 01.135.289.1 1 unit
800 1920 800 33 1470.5 635 110 side panels 01.135.291.1 1 unit
800 2120 800 38 1692.8 635 119 side panels 01.135.292.1 1 unit
800 2320 800 42 1870.6 635 128 side panels 01.135.293.1 1 unit
800 1320 600 20 892.7 435 69 no side panel 01.135.277.1 1 unit
800 1920 600 33 1470.5 435 94 no side panel 01.135.279.1 1 unit
800 2120 600 38 1692.8 435 102 no side panel 01.135.280.1 1 unit
800 2320 600 42 1870.6 435 111 no side panel 01.135.281.1 1 unit
800 1320 800 20 892.7 635 72 no side panel 01.135.295.1 1 unit
800 1920 800 33 1470.5 635 100 no side panel 01.135.297.1 1 unit
800 2120 800 38 1692.8 635 108 no side panel 01.135.298.1 1 unit
800 2320 800 42 1870.6 635 117 no side panel 01.135.299.1 1 unit
MIR00047
MIR00472
MIR00047
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1.11
1 9 ” R A C K
miracel Network Equipment Rack, NG 800Width 800, with glass door, single
W H D HU/U h d kg Model Order no. UP
800 1320 800 23 1052 730 77 side panel 01.135.649.1 1 unit
800 1920 800 37 1652 730 107 side panel 01.135.651.1 1 unit
800 2120 800 41 1852 730 115 side panel 01.135.652.1 1 unit
800 2320 800 46 2052 730 124 side panel 01.135.653.1 1 unit
800 1320 800 23 1052 730 70 no side panel 01.135.655.1 1 unit
800 1920 800 37 1652 730 97 no side panel 01.135.657.1 1 unit
800 2120 800 41 1852 730 104 no side panel 01.135.658.1 1 unit
800 2320 800 46 2052 730 113 no side panel 01.135.659.1 1 unit
- Cable entry via plinth and cover- Heat loss discharge via vent lid- Door opening angle, 180°
For installation of- Equipment with maximum width of 735
mm, shelves, installation accessories
Load rating5000 N static
Protection ratingIP 40 (upgradeable to IP 55)
Tests- Earthing in acc. with VDE 0100 T 540- Shock and vibration test in acc. with
MIL-STD 810 E- IP test in acc. with DIN 40 050 / IEC 529
Material / Finish- Basic rack, extruded aluminium,
polished- Corner piece, die-cast aluminium,
polished- Covers, zinc-passivated sheet steel,
powder-coated texture- Doors, sheet steel, powder-coated
texture, glass infill, front door, singlesafety glass panel, 4 mm
- Multifunctional struts, sheet steel,zinc-passivated
Colour- Door trim, RAL 9011 black- Visible surface of the covers,
RAL 7035 light-grey
Supply schedule1 Basic rack2 Multifunctional struts for cable clam-
ping and universal mounting options1 Cover with vent lid and integrated cable
routing1 Front door, single, single safety glass
panel, with handle and mounting forcylinder lock
1 Rear door, single, sheet steel, withhandle and mounting for cylinder lock
2 Side panels with quick connectors1 Plinth for cable management on the
side and rear with levelling feet(0-25 mm)
2 Lateral plinth trims, closed2 Plinth trims for front and rear, with vent
slots and fixing for filter mat1 Complete earthing test (VDE 0100)
How suppliedAssembled
MIR00053a
MIR00039
MIR00053
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1 9 ” R A C K
1.12
MIR00043a
miracel Lab Rack, NO 19With T-slot extrusion, width, 600 / 700 / 800
W H D HU/U h d kg Model Order no. UP
600 1200 600 23 1052 435 14 01.135.793.3 1 unit
600 1800 600 37 1652 435 16 01.135.795.3 1 unit
600 2000 600 41 1852 435 17 01.135.796.3 1 unit
600 2200 600 46 2052 435 18 01.135.797.3 1 unit
600 1200 800 23 1052 635 16 01.135.817.3 1 unit
600 1800 800 37 1652 635 18 01.135.819.3 1 unit
600 2000 800 41 1852 635 19 01.135.820.3 1 unit
600 2200 800 46 2052 635 20 01.135.821.3 1 unit
600 1800 900 37 1652 735 19 01.135.842.0 1 unit
600 2000 900 41 1852 735 20 01.135.843.0 1 unit
600 2200 900 46 2052 735 21 01.135.844.0 1 unit
700 1200 600 23 1052 435 15 01.135.799.3 1 unit
700 1800 600 37 1652 435 17 01.135.801.3 1 unit
700 2000 600 41 1852 435 18 01.135.802.3 1 unit
700 2200 600 46 2052 435 19 01.135.803.3 1 unit
700 1200 800 23 1052 635 17 01.135.823.3 1 unit
700 1800 800 37 1652 635 19 01.135.825.3 1 unit
700 2000 800 41 1852 635 20 01.135.826.3 1 unit
700 2200 800 46 2052 635 21 01.135.827.3 1 unit
800 1200 600 23 1052 435 16 01.135.805.3 1 unit
800 1800 600 37 1652 435 18 01.135.807.3 1 unit
800 2000 600 41 1852 435 19 01.135.808.3 1 unit
800 2200 600 46 2052 435 20 01.135.809.3 1 unit
800 1200 800 23 1052 635 18 01.135.829.3 1 unit
800 1800 800 37 1652 635 20 01.135.831.3 1 unit
800 2000 800 41 1852 635 21 01.135.832.3 1 unit
800 2200 800 46 2052 635 22 01.135.833.3 1 unit
800 1800 900 37 1652 735 21 01.135.847.0 1 unit
800 2000 900 41 1852 735 22 01.135.848.0 1 unit
800 2200 900 46 2052 735 23 01.135.849.0 1 unit
- With fixed 19” installation on the front forcomponents in acc. with IEC 297-3
- Flexible mounting of components usingT-slot
Jumpering spaceFront, 123 mm
Load rating5000 N static
Tests- Earthing in acc. with VDE 0100 T 540- Shock and vibration test in acc. with
MIL-STD 810 E
Material / Finish- Basic rack, extruded aluminium,
polished- Corner piece, die-cast aluminium- Multifunctional struts, sheet steel,
zinc-passivated
Supply schedule1 Basic rack2 19” aluminium vertical extrusions with
T-slot and increment slide for springnut M5
2 Multifunctional struts for cable clam-ping and universal mounting options
4 Levelling feet (0-25 mm)
How suppliedAssembled
MIR00041
MIR20002
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1.13
1 9 ” R A C K
miracel Rack ConnectorInternal mounting
W H D HU/U h d kg Model Order no. UP
01.130.935.7 1 unit
miracel Rack ConnectorExternal mounting
W H D HU/U h d kg Model Order no. UP
01.127.114.9 1 unit
MIR00100
6532.5
20
MIR00168
MIR20036
- For mechanical, stable connection of rackand cabinet suites
Material / Finish- Sheet steel, 2 mm, zinc passivated
- For secure connection of several ISP racks- Front and rear external mounting
Material- Sheet steel, 1 mm,
zinc-passivated
Supply schedule8 Mounting strapsMounting material
Supply schedule8 Mounting brackets(for connecting 2racks / cabinets)Mounting material
How suppliedFlat packed kit
miracel Cover Extrusion for Rack Suites, IP 20
W H D HU/U h d kg Model Order no. UP
1200 D 600 23 01.131.270.9 1 unit
1800 D 600 37 01.131.273.9 1 unit
2000 D 600 41 01.131.274.9 1 unit
2200 D 600 46 01.131.275.9 1 unit
1200 D 800 23 01.131.276.9 1 unit
1800 D 800 37 01.131.279.9 1 unit
2000 D 800 41 01.131.280.9 1 unit
2200 D 800 46 01.131.281.9 1 unit
1200 D 900 23 01.131.282.9 1 unit
1800 D 900 37 01.131.285.9 1 unit
2000 D 900 41 01.131.286.9 1 unit
2200 D 900 46 01.131.287.9 1 unit
2000 D 1000 41 01.127.760.9 1 unit
2200 D 1000 46 01.127.761.9 1 unit
65
MIR00320
MaterialPVC extruder extrusion, black
Supply schedule2 vertical lengths2 depth lengths
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1 9 ” R A C K
1.14
miracel 19” Vertical Extrusion, SteelWith mounting holes
W H D HU/U h d kg Model Order no. UP
16 714 short inst. 01.130.805.0 1 unit
23 1025 short inst. 01.130.807.0 1 unit
1200 23 1100 01.130.803.0 1 unit
1600 32 1500 01.130.808.0 1 unit
1800 37 1700 01.130.809.0 1 unit
2000 41 1900 01.130.810.0 1 unit
2200 46 2100 01.130.811.0 1 unit
- For front and rear installation in the rack- Caged nut mountable in HU increments
(19”)- Please also order assembly kit with initial
installation of vertical extrusions
MaterialSheet steel, 1.5 mm, zinc-passivated
Supply schedule2 Vertical extrusions with mounting holes
miracel Vertical Extrusion, MEPS20 Module
W H D Module h d kg Model Order
no. U1800 66 1700 Alu T-SLOT 01.130.847.0 1 unit
2000 74 1900 Alu T-SLOT 01.130.848.0 1 unit
2200 82 2100 Alu T-SLOT 01.130.849.0 1 unit
1800 66 1700 St. mount. holes 01.130.822.0 1 unit
2000 74 1900 St. mount. holes 01.130.823.0 1 unit
2200 82 2100 St. mount. holes 01.130.824.0 1 unit
- For metric racks, 20 module- Spring nut, variable and adjustable in
standard increment- Please order suitable assembly kit for rack
widths 700 / 800
Material- Type 1: Extruded aluminium, polished- Type 2: Sheet steel, 1.5 mm,
zinc-passivated
Supply schedule2 Vertical extrusions
- For front and rear installation in the rack- Spring nut, variable and adjustable in
HU increment (19”)- Please also order assembly kit with initial
installation of vertical extrusions
MaterialExtruded aluminium, polished
Supply schedule2 Vertical extrusions with increment
slides
miracel 19” Vertical Extrusion, AluminiumWith T-slot and increment slide
W H D HU/U h d kg Model Order no. UP
16 714 short inst. 01.130.830.0 1 unit
23 1025 short inst. 01.130.832.0 1 unit
1200 23 1100 01.130.828.0 1 unit
1600 32 1500 01.130.833.0 1 unit
1800 37 1700 01.130.834.0 1 unit
2000 41 1900 01.130.835.0 1 unit
2200 46 2100 01.130.836.0 1 unit
MIR
0030
7M
IR00
309
Type 1
MIR
0030
8
Type 2
MIR
0031
1
Note:19” alu extrusions with mounting holes on request
1.15
1 9 ” R A C K
- For mounting trade standard 19” servers- Please order suitable assembly kit for rack
widths 700 / 800- Please order mounting adapter for Knürr
standard components
MaterialSheet steel, 2 mm, zinc-passivated
Supply schedule4 19” server extrusions
miracel 19” Server Extrusion, SteelWith mounting holes
W H D HU/U h d kg Model Order no. UP
2000 41 01.127.214.0 1 unit
2200 46 01.127.215.0 1 unit
miracel Mounting Adapter for 19” Server Extrusion
W H D HU/U h d kg Model Order no. UP
1 01.127.119.9 1 unit
- For mounting Knürr standard components(storage shelves, drawers, chassis rails,keyboard runners, etc.) in 19” installationspace
MaterialSheet steel, zinc-passivated
Supply schedule4 Adapters
miracel Assembly Kits for Extrusions
W H D HU/U h d kg Model Order no. UP
700 short inst. 01.131.219.7 1unit
800 short inst. 01.131.221.7 1 unit
700 full inst. 01.131.220.7 1 unit
800 full inst. 01.131.222.7 1 unit
MIR20044
MIR00510
Supply schedule4 Node brackets (full installation)2 Node brackets (shortened installation)2 Z brackets (shortened installation)Mounting material
HU Tape Measure
W H D HU/U h d kg Model Order no. UP
01.128.400.9 1 unit
MIR20263
- To stick on miracel 19” extrusions- Enables rapid component positioning on the
correct HU position- Standard length, 42 HU, shorten as required
Supply schedule1 Tape measure
MIR
2004
1
MIR20264
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1 9 ” R A C K
1.16
miracel Swing Frame, 90º / 105º / 130º
W H D HU/U h d kg Model Order no. UP
800 1800 33 1470.5 01.117.078.1 1 unit
800 2000 38 1692.8 01.117.079.1 1 unit
800 2200 42 1870.6 01.117.080.1 1 unit
Maximum installation weight80 kg
Also order assembly kit01.131.317.1
Swing frame earthing set01.110.610.9
MaterialSheet steel, 2 mm
FinishPowder-coated texture, RAL 7035 light-grey
NoteThe rack’s nominal installation heightis reduced by 3 HU with the installation ofa swing frame
Supply schedule1 Frame2 Horizontal rails1 Square spannerMounting material
How suppliedFlat packed kit
A External installation, external pivot pointB Central installation, pivot point 1
C Central installation, pivot point 2D Central installation, pivot point 3
Useful depth according to rack type and pivot point
MIR00162
MIR00321 A MIR00322 B MIR00323 C MIR00324 D
W H D
[mm] [mm] [mm]
600 600/800
700 600/800
800 600
800 800
A B C D
150 160 140
370 280 290 205
390 370 360 285
535 370 360 285
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1.17
1 9 ” R A C K
d
600
A
MIR00314
MIR00319
Base Fixing Assembly Kit
W H D HU/U h d kg Model Order no. UP
01.130.934.7 1 unit
MaterialSheet steel, 3.0 mm
FinishZinc-passivated
Supply schedule4 Clamping plates
120
30
90 60°
d
A
800
MIR00315
d
W
800
MIR00316
19” Swing Frame, 180ºUp to 200 kg
W H D HU/U h d kg Model Order no. UP
800 1800 35 1559 01.131.426.1 1 unit
800 2000 39 1737 01.131.430.1 1 unit
800 2200 44 1959 01.131.434.1 1 unit
- With swing frame use the rack must bescrewed to the floor.
- Installation of the swing frame reduces therack’s nominal installation height by 2 HU.
- With load rating > 80 kg installation weight,please also order additional assembly kit,side panel screwing!
190” Swing frame, 180º- For mounting 19” components in
accordance with IEC 297-3- Enables free accessibility to the second
mounting level and to the installationcomponents in the swing frame
- Load capacity, max. 2000 N(please read note)
- Can be mounted in rack widths600 and 800 mm
Material- Frame, 2 mm sheet steel- Die-cast aluminium pivot bearing
Finish/Colour- Frame and horizontal rail,
powder-coated texture,RAL 7035 light-grey
- Front panel support on the verticalextrusion, zinc-passivated
Supply schedule1 19” swing frame, complete1 Horizontal mounting, below1 Horizontal mounting, above1 Square spannerMounting material
MIR00209
W H D
[mm] [mm] [mm]
600 600/800
800 600/800
A B
125
420 290
A External installation, external pivot pointB Central installation, pivot point 1
C Central installation, pivot point 2D Central installation, pivot point 3
Useful depth according to rack type and pivot point
1 9 ” R A C K
1.18
Design – A Compulsory Requirement
Design does not just mean structuring shape.Design also creates a level of communicationbetween product and person!
Both functional via usage visualization andemotional via presentation and overall appea-rance, products are incorporated into a dialogueconcerning the environment! The designer isnot just a skilled provider of form, but rather hemust also be able to precisely direct thisdialogue.
Using the relevant individual components, ourdesigners create an overall statement that morethan does justice to the criteria consisting of,technology, ergonomics, ecology, economy andaesthetics, and unites these criteria in one pro-duct that reflects the highest standard of quality.Knürr very specifically ensure that the designperformance is not just used for standards, butrather is also provided for the benefit of ourcustomers!
Powerful design is a characteristic with whichKnürr demonstrate their quality concepts.Knürr products therefore have, among so manyother attributes, a high long-life value.
1.19
1 9 ” R A C K
Design – A Brandname Ambassador
Design is an extremely important part of a product’sand a company’s total differentiation potential.
A successful design stirs emotions, awakensenthusiasm and strengthens the brandname.
In this respect, individual design solutions highlightthe characteristics of the brand, and support theprofiling of the company with the customer and incompeting with others.
Customer Applications - Design Studies
1 9 ” R A C K
1.20
1.21
1 9 ” R A C K
miracel Sheet Steel Door with Perforation, Single
MaterialSheet steel, 1.0 mm
Finish.1 = powder-coated texture, RAL 7035.8 = powder-coated texture, RAL 7021
Supply schedule1 DoorMounting material
Volume flowA large surface perforation(83% free surface) enables optimumairflow through the rack
W H D HU/U h d kg Model Order no. UP
600 1200 door compl. RAL 7035 01.128.230.1 1 unit
600 1200 door compl. RAL 7021 01.128.230.8 1 unit
700 1200 door compl. RAL 7035 01.128.231.1 1 unit
700 1200 door compl. RAL 7021 01.128.231.8 1 unit
800 1200 door compl. RAL 7035 01.128.232.1 1 unit
800 1200 door compl. RAL 7021 01.128.232.8 1 unit
600 1800 door compl. RAL 7035 01.128.242.1 1 unit
600 1800 door compl. RAL 7021 01.128.242.8 1 unit
700 1800 door compl. RAL 7035 01.128.243.1 1 unit
700 1800 door compl. RAL 7021 01.128.243.8 1 unit
800 1800 door compl. RAL 7035 01.128.244.1 1 unit
800 1800 door compl. RAL 7021 01.128.244.8 1 unit
600 2000 door compl. RAL 7035 01.128.246.1 1 unit
600 2000 door compl. RAL 7021 01.128.246.8 1 unit
700 2000 door compl. RAL 7035 01.128.247.1 1 unit
700 2000 door compl. RAL 7021 01.128.247.8 1 unit
800 2000 door compl. RAL 7035 01.128.248.1 1 unit
800 2000 door compl. RAL 7021 01.128.248.8 1 unit
600 2200 door compl. RAL 7035 01.128.250.1 1 unit
600 2200 door compl. RAL 7021 01.128.250.8 1 unit
700 2200 door compl. RAL 7035 01.128.251.1 1 unit
700 2200 door compl. RAL 7021 01.128.251.8 1 unit
800 2200 door compl. RAL 7035 01.128.252.1 1 unit
800 2200 door compl. RAL 7021 01.128.252.8 1 unit
MIR20276
MIR20277
miracel Sheet Steel Door with Perforation, Double
MaterialSheet steel, 1.0 mm
Finish.1 = powder-coated texture, RAL 7035.8 = powder-coated texture, RAL 7021
Supply schedule1 DoorMounting material
Volume flowA large surface perforation(83% free surface) enables optimumairflow through the rack
W H D HU/U h d kg Model Order no. UP
600 2000 double door RAL 7035 01.128.260.1 1 unit
600 2000 double door RAL 7021 01.128.260.8 1 unit
700 2000 double door RAL 7035 01.128.261.1 1 unit
700 2000 double door RAL 7021 01.128.261.8 1 unit
800 2000 double door RAL 7035 01.128.262.1 1 unit
800 2000 double door RAL 7021 01.128.262.8 1 unit
600 2200 double door RAL 7035 01.128.263.1 1 unit
600 2200 double door RAL 7021 01.128.263.8 1 unit
700 2200 double door RAL 7035 01.128.264.1 1 unit
700 2200 double door RAL 7021 01.128.264.8 1 unit
800 2200 double door RAL 7035 01.128.265.1 1 unit
800 2200 double door RAL 7021 01.128.265.8 1 unit
1 9 ” R A C K
1.22
MIR00216
Door Earthing Set
W H D HU/U h d kg Model Order no. UP
01.130.624.9 1 unit
- For safe earthing of the doors
Supply schedule1 EarthlineMounting material
How suppliedFlat packed kit
miracel Glass Door
MaterialSheet steel, 1.0 mm,single safety glass panel, 4.0 mm,clear glass, double door, 6.0 mm
Finish / ColourPowder-coated texture, RAL 7035Door trim, RAL 9011
Supply schedule1 Glass door, 1 design trim, mounting materialProtection ratingWith installation in the miracel rack(depending on the other rack compo-nents) a maximum protection class ofIP 55 can be achieved.
How suppliedPreassembled
W H D HU/U h d kg Model Order no. UP
600 1200 23 single door 01.130.600.1 1 unit
600 1800 37 single door 01.130.612.1 1 unit
600 2000 41 single door 01.130.616.1 1 unit
600 2200 46 single door 01.130.620.1 1 unit
700 1200 23 single door 01.130.601.1 1 unit
700 1800 37 single door 01.130.613.1 1 unit
700 2000 41 single door 01.130.617.1 1 unit
700 2200 46 single door 01.130.621.1 1 unit
800 1200 23 single door 01.130.602.1 1 unit
800 1800 37 single door 01.130.614.1 1 unit
800 2000 41 single door 01.130.618.1 1 unit
800 2200 46 single door 01.130.622.1 1 unit
600 1200 23 double door 01.131.850.1 1 unit
600 1800 37 double door 01.131.862.1 1 unit
600 2000 41 double door 01.131.866.1 1 unit
600 2200 46 double door 01.131.870.1 1 unit
700 1200 23 double door 01.131.851.1 1 unit
700 1800 37 double door 01.131.863.1 1 unit
700 2000 41 double door 01.131.867.1 1 unit
700 2200 46 double door 01.131.871.1 1 unit
800 1200 23 double door 01.131.852.1 1 unit
800 1800 37 double door 01.131.864.1 1 unit
800 2000 41 double door 01.131.868.1 1 unit
800 2200 46 double door 01.131.872.1 1 unit
MIR00057
MIR00058
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1.23
1 9 ” R A C K
MIR0059
MIR00060
miracel Sheet Steel Door
MaterialSheet steel, 1.0 mm
Finish / ColourPowder-coated texture, RAL 7035Door trim, RAL 9011
Supply schedule1 Sheet steel door, 1 design trim,mounting material
Protection ratingWith installation in the miracel rack(depending on the other rack compo-nents) a maximum protection class ofIP 55 can be achieved.
How suppliedPreassembled
W H D HU/U h d kg Model Order no. UP
600 1200 23 single door 01.130.576.1 1 unit
600 1800 37 single door 01.130.588.1 1 unit
600 2000 41 single door 01.130.592.1 1 unit
600 2200 46 single door 01.130.596.1 1 unit
700 1200 23 single door 01.130.577.1 1 unit
700 1800 37 single door 01.130.589.1 1 unit
700 2000 41 single door 01.130.593.1 1 unit
700 2200 46 single door 01.130.597.1 1 unit
800 1200 23 single door 01.130.578.1 1 unit
800 1800 37 single door 01.130.590.1 1 unit
800 2000 41 single door 01.130.594.1 1 unit
800 2200 46 single door 01.130.598.1 1 unit
600 1200 23 double door 01.131.820.1 1 unit
600 1800 37 double door 01.131.835.1 1 unit
600 2000 41 double door 01.131.840.1 1 unit
600 2200 46 double door 01.131.845.1 1 unit
700 1200 23 double door 01.131.821.1 1 unit
700 1800 37 double door 01.131.836.1 1 unit
700 2000 41 double door 01.131.841.1 1 unit
700 2200 46 double door 01.131.846.1 1 unit
800 1200 23 double door 01.131.822.1 1 unit
800 1800 37 double door 01.131.837.1 1 unit
800 2000 41 double door 01.131.842.1 1 unit
800 2200 46 double door 01.131.847.1 1 unit
Door Stop
W H D HU/U h d kg Model Order no. UP
01.130.764.7 1 unit
- Variable adjustment, max. 180°
MaterialFlat rolled steel, 15 x 3 mm
FinishZinc-passivated, colourless chrome-plated
Supply schedule1 Door stopMounting material
MIR00210
1 9 ” R A C K
1.24
- Stationary- Cable entry possible from all sides- Panel front and rear with vent slots and
installation option for filter mat
Load rating5000 N static
MaterialSheet steel
FinishPowder-coated texture, RAL 7035
Supply schedule4 Plinth corners with levelling2 Plinth panels with slots2 Plinth panels closed on the sideMounting material
How suppliedFlat-packed kit
miracel PlinthStationary, height 100 mm
W H D HU/U h d kg Model Order no. UP
600 100 600 01.130.538.1 1 unit
600 100 800 01.130.539.1 1 unit
600 100 900 01.130.540.1 1 unit
700 100 600 01.130.544.1 1 unit
700 100 800 01.130.545.1 1 unit
700 100 900 01.130.546.1 1 unit
800 100 600 01.130.550.1 1 unit
800 100 800 01.130.551.1 1 unit
800 100 900 01.130.552.1 1 unit
600 100 1000 01.127.650.1 1 unit
700 100 1000 01.127.651.1 1 unit
800 100 1000 01.127.652.1 1 unit
MIR00414
miracel PlinthStationary, height 200 mm
W H D HU/U h d kg Model Order no. UP
600 200 600 01.130.958.1 1 unit
600 200 800 01.130.959.1 1 unit
600 200 900 01.130.960.1 1 unit
700 200 600 01.130.964.1 1 unit
700 200 800 01.130.965.1 1 unit
800 200 600 01.130.970.1 1 unit
800 200 800 01.130.971.1 1 unit
- Stationary- Cable entry possible from all sides- Panel front and rear with vent slots and
installation option for filter mat
Load rating3000 N static
MaterialSheet steel
FinishPowder-coated texture, RAL 7035
Supply schedule4 Plinth corners8 PanelsMounting material
How suppliedFlat packed kit
MIR00076
Note:Plinth with tiltrestraint see 1.46
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1.25
1 9 ” R A C K
miracel PlinthMobile, height 100 mm
W H D HU/U h d kg Model Order no. UP
600 100 600 01.130.561.1 1 unit
600 100 800 01.130.562.1 1 unit
600 100 900 01.130.563.1 1 unit
700 100 600 01.130.565.1 1 unit
700 100 800 01.130.566.1 1 unit
800 100 600 01.130.569.1 1 unit
800 100 800 01.130.570.1 1 unit
800 100 900 01.130.571.1 1 unit
600 100 1000 01.127.250.1 1 unit
700 100 1000 01.127.253.1 1 unit
800 100 1000 01.127.254.1 1 unit
- Mobile- Cable entry possible on the rear- With levelling feet for stationary model
Load rating3000 N static
MaterialSheet steel, 2 mm
FinishPowder-coated texture, RAL 7035
Supply schedule1 Plinth frame2 Fixed castors with snib2 Swivel castorsMounting material
How suppliedFlat packed kit
MIR00077
miracel Plinth TrimWith brush strip
W H D HU/U h d kg Model Order no. UP
600 600 01.130.744.1 1 unit
800 800 01.130.745.1 1 unit
- For cable entry on the side, front and rear
FinishPowder-coated texture, RAL 7035
Supply schedule1 Plinth trim with brush stripMounting material
How suppliedFlat packed kit
MIR00521
miracel Filter Mat for Plinth TrimFor installation in plinth trim on the front and rear
W H D HU/U h d kg Model Order no. UP
600 01.130.530.9 1 unit
700 01.130.531.9 1 unit
800 01.130.532.9 1 unit
Supply schedule2 Filter mats
How suppliedFlat packed kit
MIR00161
- Can be mounted on the threaded eyelet ofthe basic rack
- Castor diameter, 75 mm- Threaded bolt, M12- Load capacity per castor: 100 kg
Supply schedule4 Castors
How suppliedFlat packed kit
MIR20088
miracel Castors
W H D HU/U h d kg Model Order no. UP
109.5 05.031.057.9 4 units
Note:Plinth with tiltrestraint see 1.46
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1 9 ” R A C K
1.26
miracel Bottom Cover3-Piece
W H D HU/U h d kg Model Order no. UP
600 600 01.130.750.0 1 unit
600 800 01.130.751.0 1 unit
600 900 01.130.752.0 1 unit
600 1000 01.127.660.0 1 unit
700 600 01.130.753.0 1 unit
700 800 01.130.754.0 1 unit
700 900 01.130.755.0 1 unit
700 1000 01.127.662.0 1 unit
800 600 01.130.756.0 1 unit
800 800 01.130.757.0 1 unit
800 900 01.130.758.0 1 unit
800 1000 01.127.663.0 1 unit
- For covering the rack underside- For flexible cable entry on the front and rear
Material / FinishSheet steel, 1.5 mm, zinc passivated
Supply schedule3 Bottom covers2 Mounting bracketsMounting material
How suppliedFlat packed kit
MIR00357
miracel Bottom CoverFor flexible cable entry with rubber sealing, IP 40
W H D HU/U h d kg Model Order no. UP
600 600 01.130.732.0 1 unit
600 800 01.130.733.0 1 unit
600 900 01.130.734.0 1 unit
600 1000 01.127.670.0 1 unit
700 600 01.130.735.0 1 unit
700 800 01.130.736.0 1 unit
700 900 01.127.671.0 1 unit
700 1000 01.127.672.0 1 unit
800 600 01.130.738.0 1 unit
800 800 01.130.739.0 1 unit
800 900 01.130.740.0 1 unit
800 1000 01.127.673.0 1 unit
- For covering the rack underside- With rubber sealing for flexible cable entry
on the front and rear
Protection ratingWith installation in the miracel rack(depending on the other rack compo-nents), a maximum protection class ofIP 40 can be achieved.
Material / FinishSheet steel, 1.5 mm, zinc-passivatedSponge rubber, 50 mm x 50 mm
Supply schedule1 Cable entry2 Bottom covers2 Mounting bracketsMounting material
How suppliedFlat packed kit
MIR00355
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1.27
1 9 ” R A C K
Door Locking Set
W H D HU/U h d kg Model Order no. UP
05.041.299.9 1 unit
Supply schedule1 Lock set2 Keys (half-cylinder)
NoteFurther cylinder locks on request!
MIR00066
Locking Set, Complete
W H D HU/U h d kg Model Order no. UP
01.130.940.9 1 unit
Supply schedule2 Cylinders with 4 keys2 Lockable fasteners for side panel with
4 keys
MIR00069
Rack Earthing Set
W H D HU/U h d kg Model Order no. UP
01.130.529.9 1 unit
MIR00216
- For safe rack earthing- Standard protective conductor connection
Standards IEC 950VDE 0100
Supply schedule5 EarthlinesMounting material
How suppliedFlat packed kit
MIR00217
Door Earthing Set
W H D HU/U h d kg Model Order no. UP
01.130.624.9 1 unit
- For safe earthing of the doors
Supply schedule1 EarthlineMounting material
How suppliedFlat packed kit
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1 9 ” R A C K
1.28
miracel Side Panel
Protection ratingWith installation in the miracel rack(depending on the other rack compo-nents), a maximum protection class ofIP 55 can be achieved.
MaterialSheet steel, 1.0 mm
Finish/ColourPowder-coated texture, RAL 7035
Supply schedule1 Side panelMounting material
How suppliedFlat packed kit
miracel Assembly Kit, Side Panel Screwing
W H D HU/U h d kg Model Order no. UP
01.130.937.9 1 unit
- For screwing the side panels instead ofusing quick connectors
- Provides additional rack strength
MaterialCountersunk washers and mounting nuts High-grade steel
Supply schedule16 Countersunk washers16 Mounting nuts, M516 Countersunk screws, M5 x 12
How suppliedFlat packed kit
3.5
166
M5
12
19.8 73
MIR00318
MIR00064
W H D HU/U h d kg Model Order no. UP
1200 600 23 01.130.643.1 1 unit
1800 600 37 01.130.646.1 1 unit
2000 600 41 01.130.647.1 1 unit
2200 600 46 01.130.648.1 1 unit
1200 800 23 01.130.649.1 1 unit
1800 800 37 01.130.652.1 1 unit
2000 800 41 01.130.653.1 1 unit
2200 800 46 01.130.654.1 1 unit
1200 900 23 01.130.655.1 1 unit
2000 900 41 01.130.659.1 1 unit
2200 900 46 01.130.660.1 1 unit
2000 1000 41 01.127.739.1 1 unit
2200 1000 46 01.127.740.1 1 unit
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1.29
1 9 ” R A C K
miracel Rear Panel
W H D HU/U h d kg Model Order no. UP
600 1200 23 01.130.662.1 1 unit
600 1800 37 01.130.665.1 1 unit
600 2000 41 01.130.666.1 1 unit
600 2200 46 01.130.667.1 1 unit
700 1200 23 01.130.668.1 1 unit
700 1800 37 01.130.671.1 1 unit
700 2000 41 01.130.672.1 1 unit
700 2200 46 01.130.673.1 1 unit
800 1200 23 01.130.674.1 1 unit
800 1800 37 01.130.677.1 1 unit
800 2000 41 01.130.678.1 1 unit
800 2200 46 01.130.679.1 1 unit
Protection ratingWith installation in the miracel rack(depending on the other rack compo-nents), a maximum protection class ofIP 55 can be achieved.
MaterialSheet steel, 1.0 mm
Finish/ColourPowder-coated texture, RAL 7035
Supply schedule1 Rear panelMounting material
How suppliedFlat packed kit
MIR00064
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1 9 ” R A C K
1.30
miracel Top CoverClosed, IP 55
W H D HU/U h d kg Model Order no. UP
600 600 01.130.690.1 1 unit
600 800 01.130.691.1 1 unit
600 900 01.130.692.1 1 unit
600 1000 01.127.700.1 1 unit
700 600 01.130.694.1 1 unit
700 800 01.130.695.1 1 unit
700 900 01.130.696.1 1 unit
700 1000 01.127.701.1 1 unit
800 600 01.130.691.1 1 unit
800 800 01.130.699.1 1 unit
800 900 01.130.700.1 1 unit
800 1000 01.127.702.1 1 unit
- Can be optionally used as top cover or bottom cover (combination with stationaryplinth is not possible with use as bottomcover)
Protection ratingWith installation in the miracel rack(depending on the other rack compo-nents), a maximum protection class ofIP 55 can be achieved.
FinishPowder-coated texture, RAL 7035
Supply schedule1 Top cover, closedMounting material
How suppliedFlat packed kit
MIR00070
miracel Top CoverWith cable entry, IP 40
W H D HU/U h d kg Model Order no. UP
600 600 01.130.900.1 1 unit
600 800 01.130.901.1 1 unit
600 900 01.130.902.1 1 unit
600 1000 01.127.710.1 1 unit
700 600 01.130.903.1 1 unit
700 800 01.130.904.1 1 unit
700 900 01.127.711.1 1 unit
700 1000 01.127.712.1 1 unit
800 600 01.130.906.1 1 unit
800 800 01.130.907.1 1 unit
800 900 01.130.908.1 1 unit
800 1000 01.127.713.1 1 unit
Protection ratingWith installation in the miracel rack(depending on the other rack compo-nents), a maximum protection class ofIP 40 can be achieved.
FinishPowder-coated texture, RAL 7035
Supply schedule1 Top cover with cable entrySliding covers for cable entryMounting material
How suppliedFlat packed kit
MIR20224
MIR20225
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1.31
1 9 ” R A C K
miracel Top CoverWith vent lid and cable entry, IP 40
W H D HU/U h d kg Model Order no. UP
600 600 01.130.500.1 1 unit
600 800 01.130.501.1 1 unit
600 900 01.130.502.1 1 unit
600 1000 01.127.720.1 1 unit
700 600 01.130.503.1 1 unit
700 800 01.130.504.1 1 unit
700 900 01.130.505.1 1 unit
700 1000 01.127.721.1 1 unit
800 600 01.130.506.1 1 unit
800 800 01.130.507.1 1 unit
800 900 01.130.508.1 1 unit
800 1000 01.127.722.1 1 unit
Protection ratingWith installation in the miracel rack(depending on the other rack compo-nents), a maximum protection class ofIP 40 can be achieved.
FinishPowder-coated texture, RAL 7035
Supply schedule1 Vent lid, completeCovers for cable entryMounting material
How suppliedFlat packed kit
MIR20226
miracel Brush Strip
W H D HU/U h d kg Model Order no. UP
for rack width 700/800 01.130.999.9 1 unit
for rack width 600 01.130.998.9 1 unit
- Brush strip for all covers with cable entry- For dust-protected and flexible cable entry- Instead of mounting the sliding covers in the
cover
Supply schedule2 Brush strips
How suppliedFlat packed kit
MIR20093
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1 9 ” R A C K
1.32
Fan Cover
W H D For rack type Order no. UP
600 800 miracel 03.026.306.1 1 unit
700 800 miracel 03.026.307.1 1 unit
800 800 miracel 03.026.308.1 1 unit
600 900 miracel 03.026.311.1 1 unit
700 900 miracel 03.026.312.1 1 unit
800 900 miracel 03.026.313.1 1 unit
600 1000 miracel 03.026.316.1 1 unit
700 1000 miracel 03.026.317.1 1 unit
800 1000 miracel 03.026.318.1 1 unit
- Compatible for installation in miracel- Easy installation also possible at a later
stage- With cable entry (brush strip)- With 2 fans (108 m3/h per fan)- Upgrade at any time to 8 fans (rack depth
800) or 11 fans (rack depth 900, 1000)- Cover divided in two parts for later upgrades
MaterialCover, sheet steel, 1.5 mmFan support panel, sheet steel, 1.0 mm,zinc-passivated
Finish / ColourCover, powder-coated texture,RAL 7035 light-grey
ApprovalsCE Label in accordance with the lowpotential guideline 79/23/EWG,EMC guideline 89/336/EWG
Technical data, thermostatSetting range: +10°C ... +60°CSwitching temperature differential(hysteresis): 2 KContact type: 1 changeover contactSensor: thermostatic bimetalContact rating: 230 VAC/10 A (heating),
5 A (cooling)Interference suppression: in accordancewith DIN 55014
Supply schedule1 Cover with perforations for fans2 Fans1 Thermostat1 Connection cable, 3.0 m with safety plug
How suppliedAssembled, wired and tested
LUF20019
Single Fan for Fan Cover
W H D Order no. UP
03.026.333.9 1 unit
- For later installation in the fan cover- For increasing the cooling output and
removal of hotspots
Supply schedule1 FanMounting material
How suppliedFlat packed kit
LUF20023
LUF20020
LUF20045 LUF20046
1.33
1 9 ” R A C K
Ventilation Unit
W H D For rack type Order no. UP
Type 1 For miracel withthermostat 03.026.111.9 1 unit
Type 2 For miracel withoutthermostat 03.026.112.9 1 unit
- Suitable for all rack widths and depths- For forced exhaustion- With cable entry (brush strip)- Installation in cover area, no loss of
19” installation space- Easy installation also possible at a later
stage- Incl. 3 fans (117 m3/h per fan),
(upgrade to 5 fans possible)- Mains supply: 230 V / 50 Hz
Material / FinishSheet steel, 1.5 mm, zinc-passivated
ApprovalsCE Label in accordance with the lowpotential guideline 73/23/EWG,EMC guideline 89/336/EWG
Technical data, thermostatSetting range: +10°C ... +60°CSwitching temperature differential(hysteresis): 2 KContact type: 1 changeover contactSensor: thermostatic bimetalContact rating: 230 VAC/10 A (heating),
5 A (cooling)Interference suppression: in accordancewith DIN 55014
Supply schedule1 Ventilation unit1 2.0 m connection cable with protective
contact plugType 1: with thermostatType 2: without thermostatMounting material
How suppliedAssembled, wired and tested
LUF20028
LUF20029
LUF20047
LUF00266
W
200
0
ELM00139
Fan Installation Set
W H D For rack type Order no. UP
534 miracel / B 600 / with thermostat 01.113.430.0 1 unit
734 miracel / B 800 / with thermostat 01.113.431.0 1 unit
534 miracel / B 600 / without thermostat 01.113.330.0 1 unit
734 miracel / B 800 / without thermostat 01.113.331.0 1 unit
- For quick and easy forced exhaustion ofracks
- Miracel / Tecoras Indoor- Installation in the cover area- No loss of 19’’ installation space- Easy installation also possible at a later
stage- Incl. 2 fans (160 m3/h per fan)
Material / FinishSheet steel, 1.5 mm, zinc-passivated
ApprovalsCE Label in accordance with the lowpotential guideline 73/23/EWG,EMC guideline 89/336/EWG
Technical data, thermostatSetting range: +10°C ... +60°CSwitching temperature differential(hysteresis): 2 KContact type: 1 changeover contactSensor: thermostatic bimetalContact rating: 230 VAC/10 A (heating),
5 A (cooling)Interference suppression: in accordancewith DIN 55014
Supply schedule1 Mounting panel for fan2 Fans (160 m3/h)1 Connection cable, 2.0 m with safety plugType 1: with thermostatType 2: without thermostatMounting material
How suppliedAssembled, wired and tested
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1 9 ” R A C K
1.34
Front Panel, Pivots
W H D HU/U h d kg Model Order no. UP
1003 23 for rack width 800 01.113.044.1 1 unit
1803 41 for rack width 800 01.113.048.1 1 unit
2002 46 for rack width 800 01.113.049.1 1 unit
- For covering the lateral jumpering space onthe front in miracel racks, width 800
- Easy to open with jumpering work
Material / FinishSheet steel, 1.0 mm, powder-coatedtexture
ColourRAL 7035 light-grey
Supply schedule2 Front panelsMounting material
How suppliedFlat packed kit
ELM00103a
1miracelServer Racks 1.36 to 1.50
1.35
1 9 ” R A C K
DOS20129
19” ServerRack
miracelStrong points 1.37
miracel ASPASP/Server Rack 1.40
miracelServer Rack 1.42
miracel AccessoriesVertical Trim 1.45Cable Tray 1.45Support Bracket 1.45Plinth 1.46
miracelISP Rack 1.47
miracel AccessoriesMounting Adapters 1.48Partition Panel 1.48Rack Connector 1.48Combi Lock 1.48Lock Set 1.49Extension Kit 1.50
1 9 ” R A C K
1.36
1.37
1 9 ” R A C K
Various concepts and designsfor airflow from front and rear
Optional tilt restraint providessafety for service personnel
Different variants for cablemanagement enable adjustmentto the configuration conditions
New server extrusions guaranteeeasy mounting of 19” servers ofall manufacturers
4
3
2
1
miracelStrong points
MIR202651 MIR200542
MIR200583MIR200521
MIR200532MIR004071 MIR200824
1 9 ” R A C K
1.38
Proven safety with airflow measurements in the thermal management lab
MIR20130
TEC00279
Knürr products meet the requirements ofmost environmental influences: climactic,chemical and mechanical
– IP requirements– Electro-magnetic compatibility– Corrosive resistance– Earthquake stability– Environmental tests
MIR20128 MIR20129
Airflow and Heat Simulation
Knürr Thermal Management LabMeasurements, calculations and tests
– Internal dimensions: (3.0 x 3.0 x 3.0) m2
– Temperature range: -45 to +60 °C– Humidity range: 10% to 95 %
1.39
1 9 ” R A C K
MIR20125
Knürr server racks as requested by the customer (Fujitsu Siemens Computers)
The best 19” technology products and modular,ergonomic and functional workstation systemsoptimally enhance one another.Everything from one source. Everything from Knürr!
MIR20179
1 9 ” R A C K
1.40
MIR20131
MIR20131
miracel 19” ASP Rack / 19” Server RackWidths 600 mm and 800 mm, front door with perforations
- Basic version without plinth;order optionally if required
- With special 19” server extrusions formounting trade standard servers
- With perforated doors on the frontand rear for optimal airflow, honeycombshaped, perforation, 83% airflow
Jumpering spaceFront, 85.5 mm
Load rating5000 N static
Protection ratingIP 40
AirflowPerforation 83%
Tests- Earthing in acc. with VDE 0100 T 540- Vibration test in acc. with MIL-STD 810 E- IP test in acc. with DIN40 050 / IEC 529
Material / Finish- Basic rack, extruded aluminium,
polished- Corner piece, die-cast aluminium- Multifunctional struts and 19” bracket
extrusions, sheet steel, zinc-passivated- Visible surface of the covers, powder-
coated texture
ColourFinal digit of order number .1:- Door trim RAL 9011 black- Visible surface of the covers,
RAL 7035 light-greyFinal digit of order number .8:- Door trim RAL 9011 black- Visible surface of the covers,
RAL 7021 dark-grey
Supply schedule1 Basic rack4 19” server sheet steel mounting hole
extrusions2 Doors, perforated (perforation 83%)2 Side panels1 Top cover, closed1 Complete earthing set1 Complete locking set
How suppliedAssembled
W H D HU/U h d kg Model Order no. UP
600 2000 900 41 1852 740 87 RAL 7035 01.127.933.1 1 unit
600 2000 900 41 1852 740 87 RAL 7021 01.127.933.8 1 unit
600 2200 900 46 2052 740 93 RAL 7035 01.127.934.1 1 unit
600 2200 900 46 2052 740 93 RAL 7021 01.127.934.8 1 unit
600 2000 1000 41 1852 740 91 RAL 7035 01.127.935.1 1 unit
600 2000 1000 41 1852 740 91 RAL 7021 01.127.935.8 1 unit
600 2200 1000 46 2052 740 97 RAL 7035 01.127.936.1 1 unit
600 2200 1000 46 2050 740 97 RAL 7021 01.127.936.8 1 unit
600 2000 1200 41 1852 740 100 RAL 7035 01.128.310.1 1 unit
600 2000 1200 41 1852 740 100 RAL 7021 01.128.310.8 1 unit
600 2200 1200 46 2052 740 110 RAL 7035 01.128.311.1 1 unit
600 2200 1200 46 2052 740 110 RAL 7021 01.128.311.8 1 unit
600 2000 900 41 1852 740 74 no side panels, RAL 7035 01.127.980.1 1 unit
600 2000 900 41 1852 740 74 no side panels, RAL 7021 01.127.980.8 1 unit
600 2200 900 46 2052 740 79 no side panels, RAL 7035 01.127.981.1 1 unit
600 2200 900 46 2052 740 79 no side panels, RAL 7021 01.127.981.8 1 unit
600 2000 1000 41 1852 740 78 no side panels, RAL 7035 01.127.982.1 1 unit
600 2000 1000 41 1852 740 78 no side panels, RAL 7021 01.127.982.8 1 unit
600 2200 1000 46 2052 740 82 no side panels, RAL 7035 01.127.983.1 1 unit
600 2200 1000 46 2050 740 82 no side panels, RAL 7021 01.127.983.8 1 unit
800 2000 1000 41 1852 740 99 RAL 7035 01.128.314.1 1 unit
800 2000 1000 41 1852 740 99 RAL 7021 01.128.314.8 1 unit
800 2200 1000 46 2052 740 108 RAL 7035 01.128.315.1 1 unit
800 2200 1000 46 2052 740 108 RAL 7021 01.128.315.8 1 unit
800 2000 1200 41 1852 740 108 RAL 7035 01.128.316.1 1 unit
800 2000 1200 41 1852 740 108 RAL 7021 01.128.316.8 1 unit
800 2200 1200 46 2052 740 116 RAL 7035 01.128.317.1 1 unit
800 2200 1200 46 2052 740 116 RAL 7021 01.128.317.8 1 unit
MIR20256
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1.41
1 9 ” R A C K
miracel 19” ASP Rack, Server RackWidth, 600 mm, doors with perforation, with mobile plinth and tilt restraint
W H D HU/U h d kg Model Order no. UP
600 2100 900 41 1852 740 97 side panels, RAL 7035 01.127.925.1 1 unit
600 2100 900 41 1852 740 97 side panels, RAL 7021 01.127.925.8 1 unit
600 2100 1000 41 1852 740 102 side panels, RAL 7035 01.127.926.1 1 unit
600 2100 1000 41 1852 740 102 side panels, RAL 7021 01.127.926.8 1 unit
600 2100 900 41 1852 740 84 no side panels, RAL 7035 01.127.928.1 1 unit
600 2100 900 41 1852 740 84 no side panels, RAL 7021 01.127.928.8 1 unit
600 2100 1000 41 1852 740 89 no side panels, RAL 7035 01.127.929.1 1 unit
600 2100 1000 41 1852 740 89 no side panels, RAL 7021 01.127.929.8 1 unit
- Basic version with mobile plinth, integratedpull-out tilt restraint
- With special 19” server extrusions formounting trade standard servers, such asCompaq, Dell, Sun, IBM
- With perforated doors on the frontand rear for optimal airflow, honeycombshaped, perforation, 83% airflow
VariantsType 1- Single rack (with side panels)Type 2- Rack for rack suite
(without side panels)
AirflowPerforation 83%
Jumpering spaceFront, 85.5 mm
Load rating5000 N static
Protection ratingIP 20
Tests- Earthing in acc. with VDE 0100 T 540- Vibration test in acc. with MIL-STD 810 E- IP test in acc. with DIN 40 050 / IEC 529
Material / Finish- Basic rack, extruded aluminium,
polished- Corner piece, die-cast aluminium- Multifunctional struts and 19”
extrusions, sheet steel, zinc-passivated- Visible surface of the covers, powder-
coated texture
ColourFinal digit of order number .1:- Door trim RAL 9011 black- Visible surface of the covers,
RAL 7035 light-greyFinal digit of order number .8:- Door trim RAL 9011 black- Visible surface of the covers,
RAL 7021 dark-grey
Supply scheduleType 11 Basic rack4 19” server sheet steel mounting hole
extrusions2 Perforated doors (perforation: 83%)2 Side panels1 Top cover with cable entry1 Complete earthing set1 Mobile plinth with tilt restraintType 21 Basic rack4 19” server sheet steel mounting hole
extrusions2 Perforated doors (perforation: 83%)1 Top cover with cable entry1 Complete earthing set1 Mobile plinth with tilt restraint
How suppliedAssembled
MIR20255
MIR20186
MIR20186
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1 9 ” R A C K
1.42
miracel 19” Server RackWidth 600, mobile, front glass door
W H D HU/U h d kg Model Order no. UP
600 2100 900 41 1852 740 120 RAL7035 01.128.300.1 1 unit
600 2100 900 41 1852 740 120 RAL7021 01.128.300.8 1 unit
600 2300 900 46 2052 740 135 RAL7035 01.128.301.1 1 unit
600 2300 900 46 2052 740 135 RAL7021 01.128.301.8 1 unit
600 2100 1000 41 1852 740 127 RAL7035 01.128.302.1 1 unit
600 2100 1000 41 1852 740 127 RAL7021 01.128.302.8 1 unit
600 2300 1000 46 2052 740 144 RAL7035 01.128.303.1 1 unit
600 2300 1000 46 2052 740 144 RAL7021 01.128.303.8 1 unit
- With fixed 19” installation on the front andrear for components in accordance withIEC 297-3
- Prepared for mounting trade standardservers with special server extrusions
- Cable entry via plinth- Door opening angle, 180º- Airflow from the front to the rear with
recessed glass pane on the front doorand perforations on the rear doors
Jumpering spaceFront, 85.5 mm
Load rating5000 N static
Airflow circulation1000 cm2 with 23 HU1500 cm2 with 41 HU1700 cm2 with 46 HU
Tests- Earthing in acc. with VDE 0100 T 540- Vibration test in acc. with MIL-STD 810 E- IP test in acc. with DIN40 050 / IEC 529
Material / Finish- Basic rack, extruded aluminium,
polished- Corner piece, die-cast aluminium,
polished- Covers, zinc-passivated sheet steel,
powder-coated texture- Doors, sheet steel, powder-coated
texture, glass infill, front door, singlesafety glass panel, 4 mm
- Multifunctional struts, sheet steel,zinc-passivated
ColourFinal digit of order number .1:- Door trim RAL 9011 black- Visible surface of the covers,
RAL 7035 light-greyFinal digit of order number .8:- Door trim RAL 9011 black- Visible surface of the covers,
RAL 7021 dark-grey
Supply schedule1 Basic rack4 19” sheet steel server extrusions2 Side panels with quick connectors1 Cover closed, with 23 HU version
reinforced for monitor1 Front door with single safety glass panel1 Rear door, sheet steel with perforation,
large air intake cross section1 Mobile plinth with cable entry rear and
levelling feet1 Complete earthing set1 Complete locking set
How suppliedAssembled
MIR20262
MIR20288
MIR20288
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1.43
1 9 ” R A C K
MIR20255
miracel 19” Server RackWidth 700, doors with perforation
W H D HU/U h d kg Model Order no. UP
700 2100 900 41 1852 740 100 RAL 7035 01.127.960.1 1 unit
700 2100 900 41 1852 740 100 RAL 7021 01.127.960.8 1 unit
700 2300 900 46 2052 740 107 RAL 7035 01.127.961.1 1 unit
700 2300 900 46 2052 740 107 RAL 7021 01.127.961.8 1 unit
700 2100 1000 41 1852 740 104 RAL 7035 01.127.962.1 1 unit
700 2100 1000 41 1852 740 104 RAL 7021 01.127.962.8 1 unit
700 2300 1000 46 2052 740 111 RAL 7035 01.127.963.1 1 unit
700 2300 1000 46 2052 740 111 RAL 7021 01.127.963.8 1 unit
- Front door with large area perforation forair intake
- Prepared for side cable management withasymmetric layout of the extrusions
- Front, on the side, 3 x 2 HU additional19” installation space
Jumpering spaceFront, 85.5 mm
Protection ratingIP 20
Material / Finish- Basic rack, extruded aluminium,
polished- Corner piece, die-cast aluminium,
polished- Covers, zinc-passivated sheet steel,
powder-coated texture- Doors, sheet steel, powder-coated
texture- Multifunctional struts and 19”
extrusions, sheet steel, zinc-passivated
ColourFinal digit of order number .1:- Door trim RAL 9011 black- Visible surface of the covers,
RAL 7035 light-greyFinal digit of order number .8:- Door trim RAL 9011 black- Visible surface of the covers,
RAL 7021 dark-grey
Supply schedule1 Basic rack4 19” sheet steel server extrusions1 Trim, lateral with 3 x 2 HU vertical
installation space2 Side panels1 Top cover, closed1 Front door with large area perforation1 Rear door with large area perforation1 Mobile plinth with rear cable entry and
levelling feet1 Complete earthing set
How suppliedAssembled
MIR20279
MIR20279
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1 9 ” R A C K
1.44
miracel 19” Server RackWidth 700, front glass door
W H D HU/U h d kg Model Order no. UP
700 2100 900 41 1852 740 124 01.132.043.1 1 unit
700 2300 900 46 2052 740 133 01.132.044.1 1 unit
- Front door with single safety glass paneland openings for air intake
- Prepared for side cable management withasymmetric layout of the extrusions
- Lateral, patented cable management saveson a high portion of the cable lengthsrequired for extension
- Support brackets are required at therespective positions for mounting chassis
- The cable trays with swivel arm areprepared for mounting and routing thecables without cable ties
Jumpering spaceFront, 85.5 mm
Protection ratingIP 20
Material / Finish- Basic rack, extruded aluminium,
polished- Corner piece, die-cast aluminium,
polished- Covers, zinc-passivated sheet steel,
powder-coated texture- Doors, sheet steel, powder-coated
texture, glass infill, front door, singlesafety glass panel, 4 mm
- Multifunctional struts and 19”extrusions, sheet steel, zinc-passivated
ColourRAL 7035 light-grey
Supply schedule1 Basic rack4 19” sheet steel mounting hole server
extrusions2 Side panels1 Top cover, closed1 Front door with single safety glass panel
and openings for air intake1 Rear door with large area perforation1 Mobile plinth with rear cable entry and
levelling feet6 Cable trays with swivel arm
(7 with 46 HU)4 19” support brackets, 2 HU
(5 with 46 HU)(BN 01.132.053.9)
2 19” support brackets, 3 HU(2 with 46 HU)(BN 01.132.054.9)
1 Complete earthing set
How suppliedAssembled
MIR20000
MIR20280
MIR20280
See also: the current
Telecom Special Catalogue!Where you will find more products:
• Indoor 19” rack systems
• Outdoor 19” rack systems
• Free-standing and wall cabinets
• Power supply systems
• Thermal management
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1.45
1 9 ” R A C K
Trim for 19” Vertical Installation, 3 x 2 HU/U
W H D HU/U h d kg Model Order no. UP
41 left 01.132.048.1 1 unit
46 left 01.132.049.1 1 unit
- For installation in W 700 server racks withasymmetric layout of the 19” extrusions
MaterialSheet steel, 1.5 mm
FinishPowder-coated, RAL 7035
InstallationCan be mounted on the left rack side19” vertical installation, 3 x 2 HU/UMax. depth of installation components,300 mm(only for installation in server rackBN 01.132.043.1 / 01.132.044.1)
Supply schedule1 TrimMounting material
How suppliedFlat packed kit
Cable Tray
W H D HU/U h d kg Model Order no. UP
01.132.050.9 1 unit
with swivel arm 01.132.051.9 1 unit
- For carrying light installation equipment(max. 5 kg)
- For orderly storage of excess cables- Only for installation in server rack
BN 01.132.043.1 / 01.132.044.1
Supply schedule1 Storage trayMounting material
How suppliedFlat packed kit
MIR20059
MIR20058
Support Bracket
W H D HU/U h d kg Model Order no. UP
2 01.132.053.9 1 unit
3 01.132.054.9 1 unit
- For W 700 server rackswith BN 01.132.043.1 and 01.132.044.1
- For mounting chassis’ on the 19” levelwith 4 fixing points
MIR20106
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1 9 ” R A C K
1.46
miracel PlinthMobile and stationary with tilt restraint, height 100 mm
W H D HU/U h d kg Model Order no. UP
600 100 900 type 1, mobile 01.127.260.1 1 unit
700 100 900 type 1, mobile 01.127.261.1 1 unit
800 100 900 type 1, mobile 01.127.262.1 1 unit
600 100 1000 type 1, mobile 01.127.263.1 1 unit
700 100 1000 type 1, mobile 01.127.264.1 1 unit
800 100 1000 type 1, mobile 01.127.265.1 1 unit
600 100 900 type 2, stationary 01.127.270.1 1 unit
700 100 900 type 2, stationary 01.127.271.1 1 unit
800 100 900 type 2, stationary 01.127.272.1 1 unit
600 100 1000 type 2, stationary 01.127.273.1 1 unit
700 100 1000 type 2, stationary 01.127.274.1 1 unit
800 100 1000 type 2, stationary 01.127.275.1 1 unit
Type 1: mobileType 2: stationary
Cable entry possible on the rear
Load rating5000 N static
MaterialSheet steel, 2 mm
Finish / ColourPowder-coated texture,RAL 7035 light-grey
Supply schedule, type 1:1 Plinth frame2 Fixed castors with snib2 Swivel castors4 Levelling feet1 Tilt restraintMounting material
Supply schedule, type 2:1 Plinth frame4 Levelling feet1 Tilt restraintMounting material
How suppliedFlat packed kit
Tilt Restraint for miracel RacksQuick assembly system
W H D HU/U h d kg Model Order no. UP
01.127.310.9 1 unit
- For fixing on the front vertical posts of allvariants of MIRACEL racks
- Simple and rapid mounting and removingwithout tools
- Use only as required
Supply schedule2 Anti-tilt restrainers
How suppliedFlat packed kit
MIR20050
MIR20053
MIR20051
MIR20260 MIR20261
Type 1 Type 2
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1.47
1 9 ” R A C K
miracel ISP Rack
W H D HU/U h d kg Model Order no. UP
700 2000 900 2 sep. compart. 01.127.901.1 1 Stk
700 2000 900 3 sep. compart. 01.127.900.1 1 unit
- Colocation rack, horizontal and verticalpartitions meet requirements for accesssecurity
- Standard rack is fitted with universal depthstruts that enable a flexible horizontal andvertical adjustment of the distribution
- The cable management for the bays isconfigured in an access-secure version inaccordance with security requirements
- Perforated doors ensure the highestpossible airflow
Material / Finish- Basic rack, extruded aluminium,
polished- Corner piece, die-cast aluminium- Multifunctional struts and 19” angular
extrusions, sheet steel, zinc-passivated- Visible surface of the covers,
powder-coated texture
ColourRAL 7035 light-grey
Supply schedule1 Basic rack8 19” server sheet steel mounting hole
extrusions (2 separate compartments)12 19” server sheet steel mounting hole
extrusions (3 separate compartments)16 Mounting brackets,
19” server extrusion(2 separate compartments)
24 Mounting brackets,19” server extrusion(3 separate compartments)
4 Doors, perforated (air throughput 52%)with lock (2 separate compartments)
6 Doors, perforated (air throughput 52%)with lock (3 separate compartments)
4 Frame trims2 Side panels1 Cover, closed2 Horizontal bases
(2 separate compartments)3 Horizontal bases
(3 separate compartments)8 Universal depth struts
(2 separate compartments)12 Universal depth struts
(3 separate compartments)
How suppliedAssembled
MIR20133
MIR20061
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1 9 ” R A C K
1.48
Mounting Adapter for 19” Server ExtrusionFor ASP rack and ISP rack
W H D HU/U h d kg Model Order no. UP
01.127.119.9 1 unit
- For mounting Knürr standard components(storage shelves, drawers, chassis runnners,keyboard runners, etc.)in 19” installation space
MaterialZinc-passivated sheet steel
Supply schedule4 Adapters
ISP Rack Partition Panel
W H D HU/U h d kg Model Order no. UP
ISP with 2 sep. compart. 01.127.157.9 1 unit
ISP with 3 sep. compart. 01.127.156.9 1 unit
- For secure partitioning of separatecompartments, vertical, can be mountedlater on with rack suite connection
- Individual, i.e. opened separately for eachcompartment with quick fastener
Material / FinishSheet steel, 1 mm, zinc-passivated
Supply schedule2 Partition panels (for ISP rack with
2 separate compartments)3 Partition panels (for ISP rack with
3 separate compartments)Mounting material
How suppliedFlat packed kit
ISP Rack Connector
W H D HU/U h d kg Model Order no. UP
01.127.114.9 1 unit
MaterialSheet steel, 1mm,zinc-passivated
Supply schedule8 Mounting strapsMounting material
MIR20044
MIR20028
MIR20036
MIR20095
- Mechanical solution for a high-grade locksystem
- Access either via a three digit code that canbe individually set on the handle or via amaster key that enables access to the rackindependently of the code setting
- Suitable for miracel rack single doors withswing handle
- Later upgrade without mechanical alterationalso possible
NoteFurther electronic locks,see chapter 10, Active Components
Combi Lock
W H D HU/U h d kg Model Order no. UP
01.137.013.9 1 unit
1.49
1 9 ” R A C K
Door Locking Set
W H D HU/U h d kg Model Order no. UP
05.041.299.9 1 unit
Supply schedule1 Lock set2 Keys (half-cylinder)
NoteFurther cylinder locks on request!
MIR00066
Locking Set, Complete
W H D HU/U h d kg Model Order no. UP
01.130.940.9 1 unit
Supply schedule2 Cylinders with 4 keys2 Lockable fasteners for side panel with
4 keys
MIR00069
Accessory Kit for ASP Racks
W H D HU/U h d kg Model Order no. UP
01.127.932.9 1 unit
Material / FinishSheet steel, zinc-passivatedPlastic parts: Polyamide PA 6(UL 94 V0), recyclable, coloured, fine textured
Mounting kitFor mounting Knürr standard components(front panels, storage shelves, drawers,chassis rails, etc.) in 19” installation space19” Installation option
(with length 483 mm)
DI-STRIP Compact Socket Strip (German Standard)230 VAC / 16 A ·19” Installation option.
Socket rotation: 45°Cable: H05VV-F 3G 1.5 mmMoulded angle plug with standardside panelFixing with mounting bracket,VDE Certificate
Mounting adaptersFor mounting standard Knürr components(shelves, drawers, chassis rails,keyboard runners, etc.) in the1 9” installation space with use of server
extrusions in the rack
Supply schedule4 Mounting adapters (0.127.119.9)1 Mounting kit, Z-form, mounting holes,
M5(05.041.325.9)
1 Socket strip with mounting bracket(03.300.007.)
How suppliedFlat packed kit
MIR20268
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1 9 ” R A C K
1.50
MIR20092
MIR20273
MIR20274
miracel Extension Kit, 100 mm
W H D HU/U h d kg Model Order no. UP
600 1200 23 01.127.550.1 1 unit
600 1800 37 01.127.553.1 1 unit
600 2000 41 01.127.554.1 1 unit
600 2200 46 01.127.555.1 1 unit
700 1800 37 01.127.559.1 1 unit
700 2000 41 01.127.560.1 1 unit
700 2200 46 01.127.561.1 1 unit
800 1200 23 01.127.562.1 1 unit
800 1800 37 01.127.565.1 1 unit
800 2000 41 01.127.566.1 1 unit
800 2200 46 01.127.567.1 1 unit
- For extending rack depths, even at laterstages
- Can be used in combination with doors(can not be used for rear panel)
- Additional cabling space, space for airflowetc. can be easily generated
MaterialSheet steel
Finish/ColourPowder-coated texture, RAL 7035
Supply schedule2 Vertical trims1 Horizontal trim, topExtension adapterMounting material
How suppliedFlat packed kit
NoteWith use of double doors,please also order lock bracket set:order no. 01.127.649.9
See also: the current
Telecom Special Catalogue!Where you will find more products:
• Indoor 19” Rack Systems
• Outdoor 19” rack systems
• Free-standing and wall cabinets
• Power supply systems
• Thermal management
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1miracelCoolTherm10 kW to 20 kW,water-cooled 1.52 to 1.54
Thermal management forall server applications
with high packing densityand heavy thermal
loads.
• Heat exchanger10–15–20 kW
• One coolingsystem
for all systemcomponents
1.51
1 9 ” R A C K
1 9 ” R A C K
1.52
Features
Cooling concept for server applications with highpower loss, primarily 19’’ – 1 HU servers with front airintake and output air at the rear.
� 6 HU / (9 HU) high performance air-to-water heatexchanger
� 40 HU / (37 HU) for servers;can be used with DC fans 37 HU / (34 HU)
� Channelled airflow in the entire rack� AC distribution and DC supply mounted on 3 HU
over the servers� Ventilator and DC fan power supply redundance� Preinstallation of socket strips with connection to
AC distribution (option)� Fans with temperature-dependent speed control� Alarm management for excess temperatures and
fan failure
Advantages
� No water (or other liquids) on the modules� Closed air circulation, rack, IP 55� No thermal loads on the room air� Low sound emission (closed housing)
CoolThermW ith 1 0 kW to 20 kW air-to-water heat exchanger
CoolThermIn both commercial computer centres and in many researchand development departments, 1HU servers and bladecentre servers are constantly finding increased use andapplication. This generates higher computing densities insmaller spaces. An ever-increasing problem in thisrespect is the diversion of the heat that this creates.
With this solution, PC clusters can be completely cooled forthe first time with water. The result: an expensive thermalmanagement system is consequently no longer required.
Server rack technical data
� Height, 2200 mm (46 HE); other heights optional� Width, 700 mm to 800 mm� Depth, 1200 mm to 1300 mm
LUF20036
LUF20035
Closed aircirculation
with anair-to-water
heat exchanger(cross-section)
1.53
1 9 ” R A C K
Technical dataAir-to-water heat exchanger
Heat volume to be dissipated: up to 20 kW� Water-side:
Prerun temperature: 12° C (preferred)
Postrun temperature: 18° C (preferred)
Max. pressure loss: 30 kPaVolume current: 0.5 to 0.8 l/sVentilation valve
� Air-side:2000 m3/h to 5500 m3/hAir outlet: 20° to 25° C
Cooperative development projectwith the Karlsruhe Research Centre
Rear door open
CoolThermStrong points
VentilationTemperature-dependent andspeed-controlled
Knürr Heat ExchangerAir-to-water
DistributionKnürr Powerbox/AC distribution
PowerKnürr 19” DC power distribution
4
3
2
1
LUF200311
LUF200322
LUF200333
HEI201024
LUF20034
NoteInformation at:www.thermalmanagement.de
1 9 ” R A C K
1.54
MIR20287
CoolTherm
W H D HU h d kg Model Order no. UP
700 2200 1200 46 750 290 CoolTherm, 10 kW 01.990.400.1 1 unit
700 2200 1200 46 750 290 CoolTherm, 10 kW 01.990.400.8 1 unit
800 2200 1200 46 700 310 CoolTherm, 10 to 15 kW 01.990.500.1 1 unit
800 2200 1200 46 700 310 CoolTherm, 10 to 15 kW 01.990.500.8 1 unit
800 2400 1200 50 700 340 CoolTherm, 15 to 20 kW 01.990.300.1 1 unit
800 2400 1200 50 700 340 CoolTherm, 15 to 20 kW 01.990.300.8 1 unit
- With fixed 19” installation on the front andrear for components in accordance withIEC297-3
- Installation of chassis rails and19” shelves possible
- Flexible installation of components withmounting hole extrusions
- Cable entry via bottom and top cover- Unused space closed off with blanking panels
Load ratingStatic load 1000 kg(10,000 N)
Protection ratingIP 55
Tests- Earthing in acc. with VDE 0100 T 540- Vibration test in acc. with MIL-STD 810 E- IP test in acc. with DIN 40 050 / IEC 529
ColourFinal digit of order number .1:- Visible surface of the covers,
RAL 7035 light-greyFinal digit of order number .8:- Visible surface of the covers,
dark-grey RAL 7021
How suppliedFully assembled
CoolTherm, 10 to 15 kW
- Width, 800 mm- Depth 1200 mm (optional 1300 mm) for server
useable depth: d = D 500 mm (with 1200 mmdepth: 700 mm useable for server)
- Height 2200 mm, internal 46 HU(optional: 2000 mm/41 HU and 2400 mm/50 HU)
- 2 DC radial fans, with temperature-dependentstepless speed regulation, installed besideone another, n+1 redundant with approx.4 K temperature increase
- Separate DC power supply, 3 HU110-300 V, 50/60 Hz, n+1 redundant (2x750 W)
- High-performance heat exchanger, height:6 HU
- Weight: 310 kg (incl. 7.9 litres of coolingwater)
CoolTherm, 10 kW
- Width, 700 mm- Depth 1200 mm (optional 1300 mm) for server
useable depth: d = D 450 mm (with 1200 mmdepth: 750 mm useable for server)
- Height 2200 mm, internal 46 HU(optional: 2000 mm/41 HU and 2400 mm/50 HU)
- 2 DC radial fans, with temperature-dependentstepless speed regulation, installed besideone another, n+1 redundant with approx.3 K temperature increase
- Separate DC power supply, 3 HU100-300 V, 50/60 Hz, n+1 redundant (2x750 W)
- High-performance heat exchanger, height:6 HU
- Weight: 290 kg (incl. 5.9 litres of coolingwater)
CoolTherm, 15 to 20 kW
- Width, 800 mm- Depth 1200 mm (optional 1300 mm) for server
useable depth: d = D 500 mm (with 1200 mmdepth: 700 mm useable for server)
- Height 2,400 mm, internal 50 HU(optional: 2200 mm/46 HU)
- 3 DC radial fans, with temperature-dependentstepless speed regulation, installed besideone another, n+1 redundant with approx.4 K temperature increase
- DC power supply integrated in the fans- High-performance heat exchanger, height:
9 HU- Weight: 340 kg (incl. 9.9 litres of cooling
water)
NoteInformation at:www.thermalmanagement.de
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1MaxLoadEarthquake andHeavy Load Rack 1.56 to 1.58
1.55
1 9 ” R A C K
MaxLoad
MaxLoadStrong points 1.57
MaxLoadProducts 1.58
Static tensile tests
• Heavy load systemfor static loadsof up to 1000 kg*
• Seismic stressesin accordance withBellcore, Zone 4up to 450 kg*
MIR20213
MIR20214
MIR20215
Simulation, FEM Method
Dynamic seismic test in accordance with Bellcore Standard.
* The values provided have been tried, tested, proven andverified in corresponding tests and simulations.
MaxLoad, the new rack platform forheavy load requirements fromKnürr guarantees problem-freefitting with loads of up to 1,000 kg*.
With systems that are fully equippedwith 1 HU servers or heavy storageunits, loads of this magnitude can bequickly reached. By using the newMaxLoad from Knürr, availablespace in computer centres can beused far more cost-effectively.
The Knürr MaxLoad provides theproven modularity and flexibility ofthis platform, such as, for example:
• Positioning freedom of the19” level in the depth
• Availability of various rack depths• Availability of a comprehensive
modular system with cover panels
MaxLoadNew: S t a b i l i t y fo r H e a v y L o a d s a n d E a r t h q u a k e s
MaxLoad
1 9 ” R A C K
1.56
1.57
1 9 ” R A C K
MaxLoadStrong points
Robust!Heavy load system for staticloads of up to 1000 kg*
Earthquake-proofSeismic stresses in accordancewith Bellcore, Zone 4 up to450 kg*
Freely accessibleFrom all sides: Solid base fixingin accordance with the Bellcore standard.
StabilityHigh rigidity achieved with anintelligent extrusion geometry.Flexibility with installationthrough numerous fixing points.Designed for metric and19” technology.
4
3
2
1 AccessibilitySolid construction quality PLUSaccessibility for components andvoluminous cabling space.
UniversalThe premium grade of the inter-nal structure is accentuated bythe design and engineering of thecover panels.
6
5
MIR202121
MIR800002
MIR202025 MIR20207a6
MIR202033
MIR202004
NoteInformation at:www.maxload.de
1 9 ” R A C K
1.58
MIR20211
MaxLoadWidth 600, standard and design version
W H D HU h d kg Model Order no. UP
600 2000 900 41 740 Standard 01.123.043.1 1 unit
600 2000 900 41 740 Standard 01.123.043.8 1 unit
600 2000 1000 41 740 Standard 01.123.044.1 1 unit
600 2000 1000 41 740 Standard 01.123.044.8 1 unit
600 2200 900 45 740 Standard 01.123.063.1 1 unit
600 2200 900 45 740 Standard 01.123.063.8 1 unit
600 2200 1000 45 740 Standard 01.123.064.1 1 unit
600 2200 1000 45 740 Standard 01.123.064.8 1 unit
600 2000 900 41 740 Design 01.123.343.8 1 unit
- With fixed 19” installation on the front andrear for components in accordance withIEC 297-3
- Installation of chassis rails and19” shelves possible
- Flexible installation of components withmounting hole extrusions
- Cable entry via bottom and top cover
- Heat loss discharge via perforated doors
- Door opening angle, 180°
Jumpering spaceFront, 123 mm
Load ratingStatic load 1000 kg(10,000 N)
Protection ratingIP 20
Tests- Earthing in acc. with VDE 0100 T 540- Vibration test in acc. with MIL-STD 810 E- IP test in acc. with DIN 40 050 / IEC 529- Bellcore Zone 4
Material / Finish- Basic rack, steel, powder-coated- Covers, zinc-passivated sheet steel,
powder-coated texture- Doors, sheet steel, powder-coated
texture- Glass infill front door, single safety
glass panel, 4 mm
ColourFinal digit of order number .1:- Visible surface of the covers,
RAL 7035 light-greyFinal digit of order number .8:- Visible surface of the covers,
dark-grey RAL 7021
Supply schedule1 Basic rack2 Side panels4 19” server extrusions2 Perforated doors (design rack
in design version)1 Cover1 Earth set, complete4 Levelling feet
How suppliedFully assembled
MIR20207Example: Design version
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
2smaractNetwork RackServer Rack 2.2 to 2.13
2.1
1 9 ” C O M PA C T R A C K
Network andServer Rack
smaractStrong points 2.4
smaractNetwork Rack 2.6
smaractServer Rack 2.7
smaract AccessoriesVentilation Unit 2.8Extrusions 2.8Rear Door 2.9Top Cover/Bottom Cover 2.10Filter Mat 2.10Plinth 2.11Swivel Castors 2.12Stacking Set 2.12Eyebolt Set 2.12Base Fixing 2.12Wall Mounting 2.13
1 9 ” C O M PA C T R A C K
2.2
SMA20109
SMA20166
2.3
1 9 ” C O M PA C T R A C K
smaractStrong panels in practice
The smaract is a specific response tothe current industry trend towardsdecentralised networking in compa-nies.
smaract stands for an innovative andpractical total concept with extreme-ly low spatial demands. High-gradeflexibility and especially high-perfor-mance! Extremely integration-capable,always modularly extendable andpacked with impressive detailedsolutions.
In brief: An ideal and compact19” platform in various models thatcomply with IP and EMC require-ments.
The fact that not a single cubic centi-metre is wasted with every one of thesmaract CompactRack models isembodied in the well-earned name,“The Big Little One”.The innovative frame concept withtriangular extrusions keeps theweight low and the stability high.
The patented mounting hole rails inthe 19” extrusion ensure easy andquick positioning of the components.
SMA20124
SMA20122
1 9 ” C O M PA C T R A C K
2.4
AccessAccess from all sides is a time-saving factor, e.g. with systemintegration or maintenance.
Intelligent constructionLow weight with innovative frameconcept. Despite this, high stabilitywith new triangular extrusions.
Evolving with the taskSimple expansion with stackability.
Cable managementNo matter how complex, Knürrcreate solutions.
EMC and IP versionThe compact rack can be upgrad-ed to IP or EMC standard at alltimes. (Also in combinedIP/EMC version)(see Telecom Catalogue)
Forward-thinkingFlexibility with integration of19” technology.6 Heights to choose from,9 HU to 24 HU.
6
5
4
3
2
1
smaractStrong points
SMA200052
SMA200043
SMA200176
SMA200061
SMA200564
SMA200465
2.5
1 9 ” C O M PA C T R A C K
Material- Extruded aluminium- Corner piece, die-cast
aluminium- Sheet steel covers- Doors, sheet steel or with
single safety glass panel,opening angle, over 180°
19” Components in acc.with IEC 297-3- Height: 9 HU to 24 HU
1 HU (or 1 U) = 44.45 mm- Width: 482.6 mm (19”)
Versions- IP 20- IP 54 (see Telecom Catalogue)- EMC (see Telecom Catalogue)
Space solution- 82% of the basic surface can
be used as space for installa-tion and cable routing
Configuration- Stationary, on levelling feet- Mobile on castors with snib
Finish- Basic rack, polished- Covers, powder-coated texture,
RAL 7035 light-grey
Static load rating- 2000 N with stationary version
How supplied- Fully assembled
Tests according to version- Safety in acc. with EN 50298
and EN 60950- Protective conductor/earth in
acc. with DIN VDE 0701-1- Vibration test in acc. with
MIL-STD 810 E- Vibration and shock test in acc.
with DIN EN 300019-2-2- IP test in acc. with
DIN EN 60529- EMC shielding attenuation in
acc. with IEEE-STD-299 and VG95 373 part 15 (30 MHz - 1 GHz)
- Plastic components in compli-ance with UL 94-VO
smaract 19” Rack, in accordance with IEC 297Technical data
1 9 ” C O M PA C T R A C K
2.6
smaract 19” Compact RackWith glass door
W H D HU/U h d (max.) kg Model Order no. UP
600 478 600 9 450 16 with 19” T-slot extrusion 02.110.007.1 1 unit
600 612 600 12 450 20 with 19” T-slot extrusion 02.110.012.1 1 unit
600 745 600 15 450 24 with 19” T-slot extrusion 02.110.017.1 1 unit
600 879 600 18 450 28 with 19” T-slot extrusion 02.110.022.1 1 unit
600 1012 600 21 450 32 with 19” T-slot extrusion 02.110.027.1 1 unit
600 1143 600 24 450 36 with 19” T-slot extrusion 02.110.032.1 1 unit
600 478 800 9 650 19 with 19” T-slot extrusion 02.110.009.1 1 unit
600 612 800 12 650 23 with 19” T-slot extrusion 02.110.014.1 1 unit
600 745 800 15 650 27 with 19” T-slot extrusion 02.110.019.1 1 unit
600 879 800 18 650 31 with 19” T-slot extrusion 02.110.024.1 1 unit
600 1012 800 21 650 35 with 19” T-slot extrusion 02.110.029.1 1 unit
600 1145 800 24 650 39 with 19” T-slot extrusion 02.110.034.1 1 unit
600 478 600 9 450 16 with 19” mount. holes extru. 02.110.057.1 1 unit
600 612 600 12 450 20 with 19” mount. holes extru. 02.110.062.1 1 unit
600 745 600 15 450 24 with 19” mount. holes extru. 02.110.067.1 1 unit
600 879 600 18 450 28 with 19” mount. holes extru. 02.110.072.1 1 unit
600 1012 600 21 450 32 with 19” mount. holes extru. 02.110.077.1 1 unit
600 1145 600 24 450 36 with 19” mount. holes extru. 02.110.082.1 1 unit
600 478 800 9 650 19 with 19” mount. holes extru. 02.110.059.1 1 unit
600 612 800 12 650 23 with 19” mount. holes extru. 02.110.064.1 1 unit
600 745 800 15 650 27 with 19” mount. holes extru. 02.110.069.1 1 unit
600 879 800 18 650 31 with 19” mount. holes extru. 02.110.074.1 1 unit
600 1012 800 21 650 35 with 19” mount. holes extru. 02.110.079.1 1 unit
600 1145 800 24 650 39 with 19” mount. holes extru. 02.110.084.1 1 unit
SMA20024
- For components in acc. with IEC 297-3- Access from all sides, removable covers- Flexible assembly of the components using
T-slot (also optional with mounting holes)- Cable entry via rear panel
(also optionally via top cover/bottom cover)- Heat loss discharge via own convection or
with fan unit on the rear panel (accessory)- Door opening angle, 180°
Jumpering spaceFront, 110 mm
Load rating2000 N static
Protection ratingIP 20 (upgradeable to IP 54)
Material / Finish- Basic rack, extruded aluminium,
polished- Corner piece, die-cast aluminium,
polished- Covers, sheet steel, powder-coated
texture- Glass infill front door,
single safety glass panel
ColourRAL 7035 light-grey
Supply schedule1 Basic rack2 Side panels, closed, both sides, hinged1 Cover, closed1 Glass front door1 Rear door with cable entry, lockable,
prepared for ventilation unit2 19” Aluminium vertical extrusions, at
the front, with T-slot incl. incrementslide or 19” sheet steel verticalextrusion, front, with mounting holes(see table)
1 Earthing set4 Levelling feet
How suppliedAssembled
NoteIf required, please also order19” extrusions (see pages 2.8-2.9)for rear 19” level!
SMA20026
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
2.7
1 9 ” C O M PA C T R A C K
SMA20060
smaract 19” Server Compact RackWith perforated door
W H D HU/U h d kg Model Order no. UP
600 478 900 9 740 with 19” server extru., RAL 7035 02.110.010.1 1 unit
600 478 900 9 740 with 19” server extru., RAL 7021 02.110.010.8 1 unit
600 745 900 15 740 with 19” server extru., RAL 7035 02.110.020.1 1 unit
600 745 900 15 740 with 19” server extru., RAL 7021 02.110.020.8 1 unit
600 1012 900 21 740 with 19” server extru., RAL 7035 02.110.030.1 1 unit
600 1012 900 21 740 with 19” server extru., RAL 7021 02.110.030.8 1 unit
600 1145 900 24 740 with 19” server extru., RAL 7035 02.110.035.1 1 unit
600 1145 900 24 740 with 19” server extru., RAL 7021 02.110.035.8 1 unit
SMA20067
- For components in acc. with IEC297-3- Access from all sides, removable covers- With special 19” server extrusions for
mounting trade standard servers- With perforated doors on the front and rear
for optimal airflow- Door opening angle, 180°
Jumpering spaceFront, 75 mm
Airflow circulation900 cm2 with 9 HU
1500 cm2 with 15 HU2100 cm2 with 21 HU2400 cm2 with 24 HU
Material / Finish- Basic rack, extruded aluminium,
polished- Corner piece, die-cast aluminium,
polished- Covers, sheet steel, powder-coated
texture
ColourFinal digit of order number .1:RAL 7035 light-greyFinal digit of order number .8:RAL 7021 dark-grey
Supply schedule1 Basic rack2 Side panels, closed, both sides, hinged1 Cover, closed1 Front door with perforation1 Rear door with perforation4 19” server sheet steel mounting hole
extrusions1 Earthing set4 Levelling feet
NotePlease also order mounting adapterfor 19” server extrusions.Set with 4 adapters, 01.127.119.9(see page 2.9).
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
See also: the current
Telecom Special Catalogue!Where you will find more products:
• Indoor 19” rack systems
• Outdoor 19” rack systems
• Free-standing and wall cabinets
• Power supply systems
• Thermal management
1 9 ” C O M PA C T R A C K
2.8
smaract 19” Sheet Steel ExtrusionWith mounting holes
W H D HU/U h d kg Model Order no. UP
9 02.111.156.9 1 unit
12 02.111.157.9 1 unit
15 02.111.158.9 1 unit
18 02.111.159.9 1 unit
21 02.111.160.9 1 unit
24 02.111.161.9 1 unit
- For front and rear installation
Material / Finish19” Extrusions: sheet steel,zinc-passivatedMounting bracket: sheet steel,zinc-passivated, 1.5 mm
Supply schedule2 19” extrusions with mounting holes4 Mounting bracketsMounting material
How suppliedFlat packed kit
SMA20104
SMA20106
smaract Ventilation Unit
W H D HU/U h d kg Model Order no. UP
Type 1 02.111.180.9 1 unit
Type 2 (quiet) 02.111.181.9 1 unit
- Easy add-on on the rear panel- With two axial fans- With thermostat
Single fan technical data- Type 1:
Max. volume flow (free blowing):160 m3/h
Noise (free blowing): 46 dB(A)- Type 2 (quiet):
Max. volume flow (free blowing):100 m3/h
Noise (free blowing): 32 dB(A)
Material / FinishSheet steel, zinc-passivated
Supply schedule1 Ventilation unit ready for connection
wired, with thermostatMounting material
How suppliedPreassembledSMA20033
smaract-19” Aluminium ExtrusionWith T-slot
W H D HU/U h d kg Model Order no. UP
9 02.111.146.9 1 unit
12 02.111.147.9 1 unit
15 02.111.148.9 1 unit
18 02.111.149.9 1 unit
21 02.111.150.9 1 unit
24 02.111.151.9 1 unit
- For front and rear installation
Material / Finish19” Extrusions: extruded aluminium,polishedMounting bracket: sheet steel,zinc-passivated
Supply schedule2 19” extrusions with T-slot incl.
increment slide 4 Mounting bracketsMounting material
How suppliedFlat packed kit
SMA20103
SMA20105
2.9
1 9 ” C O M PA C T R A C K
smaract 19” Sheet Steel Server Extrusion
W H D HU/U h d kg Model Order no. UP
9 02.111.136.9 1 unit
12 02.111.137.9 1 unit
15 02.111.138.9 1 unit
18 02.111.139.9 1 unit
21 02.111.140.9 1 unit
24 02.111.141.9 1 unit
- For front and rear installation
Material / FinishSheet steel, zinc-passivated, 2.5 mm
Supply schedule2 19” extrusions with mounting holesMounting material
How suppliedFlat packed kit
NotePlease also order mounting adapter01.127.119.9 (set with 4 adapters)MIR20046
MIR20041
smaract Rear Door Closed
W H D HU/U h d kg Model Order no. UP
9 02.111.076.1 1 unit
12 02.111.077.1 1 unit
15 02.111.078.1 1 unit
18 02.111.079.1 1 unit
21 02.111.080.1 1 unit
24 02.111.081.1 1 unit
Supply schedule1 Rear panel, closedMounting material
Material / FinishSheet steel, powder-coated texture
How suppliedFlat packed kit
ColourRAL 7035 light-grey
SMA20031
Mounting Adapter for 19” Server Extrusion
W H D HU/U h d kg Model Order no. UP
1 01.127.119.9 1 unit
- For mounting Knürr standard components(storage shelves, drawers, chassis rails,keyboard runners, etc.) in 19” installationspace
MaterialSheet steel, zinc-passivated
Supply schedule4 Adapters
MIR20044
MIR20082
1 9 ” C O M PA C T R A C K
2.10
smaract Top Cover/Bottom CoverClosed
W H D HU/U h d kg Model Order no. UP
600 600 02.111.052.1 1 unit
600 800 02.111.054.1 1 unit
600 900 02.111.055.1 1 unit
600 900 02.111.055.8 1 unit
Material / FinishSheet steel, powder-coated texture
ColourFinal digit of order number .1:RAL 7035 light-greyFinal digit of order number .8:RAL 7021 dark-grey
Supply schedule1 Bottom cover, closedMounting material
How suppliedFlat packed kit
NoteUse of the bottom cover in combinationwith the stationary plinth is not possibleSMA20028
smaract Top Cover/Bottom CoverWith cable entry
W H D HU/U h d kg Model Order no. UP
600 600 02.111.042.1 1 unit
600 800 02.111.044.1 1 unit
600 900 02.111.045.1 1 unit
600 900 02.111.045.8 1 unit
- With integrated cable clamping- With brush strip for cable entry
Material / FinishSheet steel, powder-coated texture
ColourFinal digit of order number .1:RAL 7035 light-greyFinal digit of order number .8:RAL 7021 dark-grey
Supply schedule1 Bottom cover with cable routing1 Brush stripMounting material
How suppliedFlat packed kit
SMA20168
smaract Bottom Cover, PerforatedWith filter mat
W H D HU/U h d kg Model Order no. UP
600 600 02.111.062.1 1 unit
600 800 02.111.064.1 1 unit
600 900 02.111.065.1 1 unit
- For cooling using air convection
Material / FinishBottom cover: sheet steel, powder-coatedtextureFilter mat: filedon
ColourRAL 7035 light-grey
Supply schedule1 Perforated bottom cover with filter matMounting material
How suppliedFlat packed kit
SMA20029
2.11
1 9 ” C O M PA C T R A C K
SMA20058
smaract Replacement FilterFor smaract perforated bottom cover
W H D HU/U h d kg Model Order no. UP
for T600 02.111.068.9 5 units
for T800 02.111.069.9 5 units
for T900 02.111.069.9 5 units
- For use in conjunction with perforatedbottom cover
MaterialFiledon
Supply schedule5 Replacement filters
How suppliedFlat packed kit
smaract Plinth
W H D HU/U h d kg Model Order no. UP
600 100 600 02.111.201.1 1 set
600 100 800 02.111.203.1 1 set
600 100 900 02.111.204.1 1 set
600 100 900 02.111.204.8 1 set
- Stationary- Cable entry possible from all sides- Panels front and rear with vent slots and
installation option for filter
Material / FinishSheet steel, powder-coated texture
ColourFinal digit of order number .1:RAL 7035 light-greyFinal digit of order number .8:RAL 7021 dark-grey
Supply schedule4 Plinth corners2 Closed panels2 Panels, with vent slotsMounting material
How suppliedFlat packed kit
smaract Plinth Trims with Cable EntryFor use in conjunction with the plinth
W H D HU/U h d kg Model Order no. UP
600 02.111.206.1 1 unit
- For use in conjunction with the plinth
Material / FinishSheet steel, powder-coated texture
Supply schedule1 Trim with cable entry1 Brush stripMounting material
ColourRAL 7035 light-grey
How suppliedFlat packed kit
SMA20091
SMA20098
smaract Filter Mat for Plinth PanelFor installation in plinth panel on the front and rear
W H D HU/U h d kg Model Order no. UP
600 01.130.532.9 1 set
Supply schedule2 Filter mats
MIR20140
1 9 ” C O M PA C T R A C K
2.12
smaract Twin Castor
W H D HU/U h d kg Model Order no. UP
02.111.175.9 4 units
- Height 50 mm
ColourRAL 9011, graphite black
Load rating400 N per castor
1200 N max. static total load per rack
Supply schedule2 Twin castors2 Fixed castors
StandardsCastors in acc. with DIN 12530Load rating in acc. with DIN 12527
How suppliedFlat packed kit
SMA20034
smaract Stacking Set
W H D HU/U h d kg Model Order no. UP
02.111.171.9 4 units
- Fixed connection for stacking compact racks
Material / FinishSteel, cold rolled, zinc-passivated
Supply schedule4 Stacking elementsMounting material
How suppliedFlat packed kit
SMA20035
smaract Eyebolt Set
W H D HU/U h d kg Model Order no. UP
01.243.440.9 4 units
- For hanging on crane hooks- Load rating, 1900 N static per ring screw
Material / FinishTool steel, forged
Supply schedule4 Eyebolts
How suppliedFlat packed kit
MEC00074
MIR00319
Base Fixing Assembly Kit
W H D HU/U h d kg Model Order no. UP
01.130.934.7 1 unit
MaterialSheet steel, 3.0 mm
FinishZinc-passivated
Supply schedule4 Clamping plates
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
2.13
1 9 ” C O M PA C T R A C K
smaract Wall Mounting Bracket
W H D HU/U h d kg Model Order no. UP
600 02.111.220.9 1 set
Material / FinishSheet steel, powder-coated texture
ColourRAL 7035 light-grey
Supply schedule2 Wall mounting bracketsDrill hole templateMounting material
Load rating500 N
How suppliedFlat packed kit
SMA20085
SMA20094
3doubleprorack19” NetworkStand-Alone Enclosure 3.2 to 3.12
3.1
1 9 ” E N C L O S U R E
19” NetworkStand-AloneEnclosure
doubleprorackStrong points 3.3
doubleprorack19” Stand-Alone Enclosure 3.519” Enclosure Without Door 3.6
doubleprorackAccessoriesExtrusions 3.7Fan Unit 3.7Doors/Rear Panel 3.8Connection Board 3.9Plinth 3.9Earthing Set 3.10Mounting Bracket 3.11Rack Connector 3.11Base Fixing 3.11Swivel Castors 3.12Eyebolt Set 3.12
1 9 ” E N C L O S U R E
3.2
DOP00256
3.3
1 9 ” E N C L O S U R E
Complete 19” enclosure range,from the 6 HU Desktop Enclosureto the 24 HU Compact Rack.
Various top and bottom covervariants are available for individ-ual requirements for air through-put and IP protection rating.Top and bottom covers can becombined with each other invarious ways.
Lockable front door, optionallyas single safety glass panel or assheet steel door.
The extrusions for installing the19” components are availablewith mounting holes or with aT-slot for incremented orstepless mounting.
The 19” mounting level can beset in the depth in 25 mm incre-ments. This allows higher frontpanel structures to also beinstalled with use of a door.
Individual configurations for yourspecial application case enablelevelling of uneven floor surfaceswith the levelling feet, mobilitywith castors or stacking withenclosure foot.
As an additional alternative, aplinth with front vent panel offersspace for cabling and ventilationfrom below.
Various door types allow appear-ance and service access to beindividually designed while takingthe required protection ratinginto account.
Different types of cable entryare available according to therequired protection rating.
9
8
7
6
5
4
3
2
1
doubleprorackStrong points
DOP002453
DOP200044
DOP200054
DOP002421 DOP002442
DOP002486
DOP002529
DOP002475
DOP002507
DOP002518
1 9 ” E N C L O S U R E
3.4
Die-cast aluminium frame con-struction connected with alumini-um depth and vertical extrusions
Material- Sheet steel covers,
0.8 mm, zinc-passivated- Die-cast aluminium frame- Extruded aluminium depth and
vertical extrusions- In the 19” mounting level,
extruded aluminium with T-slotand mounting holes
- Sheet steel, full glass doors orextrusion doors with sheet steelor safety glass panel
External dimensions- Widths:
554.4 mm754.4 (network enclosures)
- Depths:500, 600, 700 or 800 mm
- Height:177.8 – 1111.3 mm(without feet or plinth)
Installation space accordingto IEC 297-3- Height: 3 – 24 HU
(1 HU = 44.45 mm)– Width: 19”
How supplied- Assembled
Load rating- 1500 N static
Configuration- Stationary, on plastic feet
or plinth with feet- Mobile on twin swivel castors
Finish / Colour– Covers, powder-coated texture,
RAL 7035 light-grey- Frame and extrusions, powder-
coated texture, grey-blueRAL 5008
Tests- Vibration test in acc.
with MIL-STD 810 D- NEMA 12 Test
doubleprorack 19” Enclosure According to IEC 297-3Technical data
3.5
1 9 ” E N C L O S U R E
DOP00230
DOP00256
doubleprorack LAN 19” Network Stand-Alone Enclosure
W H D HU/U h d kg Model Order no. UP
554.4 311 500 6 265 335 full glass door 01.246.541.1 1 unit
554.4 444 500 9 399 335 full glass door 01.246.542.1 1 unit
554.4 577 500 12 532 335 full glass door 01.246.543.1 1 unit
554.4 711 500 15 666 335 full glass door 01.246.544.1 1 unit
554.4 844 500 18 799 335 full glass door 01.246.545.1 1 unit
554.4 978 500 21 932 335 full glass door 01.246.546.1 1 unit
554.4 1111 500 24 1066 335 full glass door 01.246.547.1 1 unit
554.4 311 600 6 265 435 full glass door 01.246.641.1 1 unit
554.4 444 600 9 399 435 full glass door 01.246.642.1 1 unit
554.4 577 600 12 532 435 full glass door 01.246.643.1 1 unit
554.4 711 600 15 666 435 full glass door 01.246.644.1 1 unit
554.4 844 600 18 799 435 full glass door 01.246.645.1 1 unit
554.4 978 600 21 932 435 full glass door 01.246.646.1 1 unit
554.4 1111 600 24 1066 435 full glass door 01.246.647.1 1 unit
554.4 577 800 12 577 635 full glass door 01.246.843.1 1 unit
554.4 711 800 15 666 635 full glass door 01.246.844.1 1 unit
554.4 844 800 18 799 635 full glass door 01.246.845.1 1 unit
554.4 978 800 21 932 635 full glass door 01.246.846.1 1 unit
554.4 1111 800 24 1066 635 full glass door 01.246.847.1 1 unit
754.4 711 600 15 666 435 full glass door 01.246.694.1 1 unit
754.4 844 600 18 799 435 full glass door 01.246.695.1 1 unit
754.4 978 600 21 932 435 full glass door 01.246.696.1 1 unit
754.4 711 800 15 666 635 full glass door 01.246.894.1 1 unit
754.4 844 800 18 799 635 full glass door 01.246.895.1 1 unit
754.4 978 800 21 932 635 full glass door 01.246.896.1 1 unit
- For components in acc. with IEC 297-3- Side covers and rear panel can be removed- Flexible assembly of the components using
T-slot (also optional with mounting holes)- Cable entry via rear panel- Heat loss discharge via own convection on
the rear panel (or optionally with fan unit)
Jumpering spaceFront, 125 mm
Load rating1500 N static
Protection ratingIP 20
Material / FinishSheet steel covers,
powder-coated textureDie-cast aluminium frameExtruded aluminium extrusionsGlass infill front door,
single safety glass panel
ColourCovers, RAL 7035, light-greyFrame and extrusions, RAL 5008,grey-blue
Supply schedule1 Frame rack incl. side covers1 Full glass door1 Rear panel with cable entry, 3 parts1 Cover, above, with vent slots1 Cover, below, with vent slots1 Set, 19” installation
(4 vertical extrusions with T-slot)1 Earthing set with earthing bolt, M8
How suppliedAssembled
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
DOP00052
1 9 ” E N C L O S U R E
3.6
doubleprorack 19” Enclosure Without Front Door
- For components in acc. with IEC 297-3- Side covers and rear panel can be removed- Heat loss discharge via own convection on
the rear panel (or optionally with fan unit)
Load rating1500 N static
Protection ratingIP 20
Material / FinishSheet steel covers,
powder-coated textureDie-cast aluminium frameExtruded aluminium extrusionsGlass infill front door,
single safety glass panel
ColourCovers, RAL 7035, light-greyFrame and extrusions, RAL 5008,grey-blue
Supply schedule1 Frame rack incl. side covers1 Cover, above, with vent slots1 Cover, below, with vent slots1 Rear panel, 2 parts2 19” front extrusions, mounting holes2 19” extrusions at the rear, T-slot
How suppliedAssembled
DOP00253
W H D HU/U h d kg Model Order no. UP
554.4 178 500 3 132 460 10.0 without door 01.243.503.1 1 unit
554.4 311 500 6 265 460 12.5 without door 01.243.506.1 1 unit
554.4 444 500 9 399 460 15.0 without door 01.243.509.1 1 unit
554.4 577 500 12 532 460 17.0 without door 01.243.512.1 1 unit
554.4 711 500 15 666 460 19.5 without door 01.243.515.1 1 unit
554.4 844 500 18 799 460 22.0 without door 01.243.518.1 1 unit
554.4 311 600 6 265 560 14.0 without door 01.243.606.1 1 unit
554.4 444 600 9 399 560 16.5 without door 01.243.609.1 1 unit
554.4 577 600 12 532 560 19.0 without door 01.243.612.1 1 unit
554.4 711 600 15 666 560 22.0 without door 01.243.615.1 1 unit
554.4 844 600 18 799 560 24.5 without door 01.243.618.1 1 unit
554.4 978 600 21 932 560 27.0 without door 01.243.621.1 1 unit
554.4 1111 600 24 1066 560 29.5 without door 01.243.624.1 1 unit
554.4 577 700 12 532 660 21.5 without door 01.243.712.1 1 unit
554.4 711 700 15 666 660 24.0 without door 01.243.715.1 1 unit
554.4 844 700 18 799 660 27.0 without door 01.243.718.1 1 unit
554.4 978 700 21 932 660 29.5 without door 01.243.721.1 1 unit
554.4 1111 700 24 1066 660 32.5 without door 01.243.724.1 1 unit
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
3.7
1 9 ” E N C L O S U R E
DOP00313
DOP00055
doubleprorack 19” Front InstallationWith T-slot
W H D HU/U h d kg Model Order no. UP
6 01.240.440.9 1 set
9 01.240.443.9 1 set
12 01.240.445.9 1 set
15 01.240.446.9 1 set
18 01.240.447.9 1 set
21 01.240.448.9 1 set
24 01.240.449.9 1 set
- Can also be used as second mounting level
MaterialExtruded aluminium
FinishPolished
Supply schedule2 19” front extrusions with T-slotMounting material
How suppliedFlat packed kit
doubleprorack 19” Front InstallationWith mounting holes
W H D HU/U h d kg Model Order no. UP
6 01.240.490.9 1 set
9 01.240.493.9 1 set
12 01.240.495.9 1 set
15 01.240.496.9 1 set
18 01.240.497.9 1 set
21 01.240.498.9 1 set
24 01.240.499.9 1 set
- Can also be used as second mounting level
MaterialExtruded aluminium
FinishPolished
Supply schedule2 19” extrusions at the front with
mounting holes
How suppliedFlat packed kit
DOP20004
DOP20005
doubleprorack Rear Fan Panel, 3 HU
W H D HU/U h d kg Model Order no. UP
554.4 132.5 3 without thermo. 01.243.425.1 1 unit
554.4 132.5 3 with thermo. 01.243.428.1 1 unit
754.4 132.5 3 without thermo. 01.243.480.1 1 unit
754.4 132.5 3 with thermo. 01.243.484.1 1 unit
- With axial fans(220 V, max. volume flow per fan, 160 m2/h)
- Plastic protective grill
Supply schedule1 Rear fan panel, wiredMounting materialType 1: without thermostatType 2: with thermostat, 10 - 60°C and
power supply lead, 2.5 mm
Finish / ColourPowder-coated texture, RAL 7035, lightgrey
How suppliedAssembled
ELM00107
DOP00272
1 9 ” E N C L O S U R E
3.8
doubleprorack Sheet Steel Door
W H D HU/U h d kg Model Order no. UP
554.4 6 01.240.473.1 1 unit
554.4 9 01.240.476.1 1 unit
554.4 12 01.240.478.1 1 unit
554.4 15 01.240.479.1 1 unit
554.4 18 01.240.480.1 1 unit
554.4 21 01.240.481.1 1 unit
554.4 24 01.240.482.1 1 unit
- With cylinder lock, lockable- Not suitable for enclosures with which an
IP protection of 54 should be reached.
Material / FinishSheet steel, 1.0 mm, powder-coatedtexture
ColourRAL 7035, light-grey
Supply schedule1 Sheet steel doorMounting material
How suppliedPreassembled
doubleprorack Rear Panel, Closed
W H D HU/U h d kg Model Order no. UP
554.4 3 01.240.451.1 1 unit
554.4 6 01.240.454.1 1 unit
554.4 9 01.240.457.1 1 unit
554.4 12 01.240.459.1 1 unit
554.4 15 01.240.460.1 1 unit
554.4 18 01.240.461.1 1 unit
554.4 21 01.240.462.1 1 unit
- For doubleprorack width 554.4 mm
Material / FinishSheet steel, 0.8 mm, powder-coatedtexture
ColourRAL 7035 light-grey
Supply schedule1 Rear panel, closedMounting material
How suppliedFlat packed kit
DOP00260
DOP00275
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
3.9
1 9 ” E N C L O S U R E
doubleprorack Connection PanelWith cable routing
W H D HU/U h d kg Model Order no. UP
554.4 132.5 3 01.243.435.1 1 unit
- For cable entry in conjunction with rearpanel shortened accordingly by 3 HU/U
Material / FinishSheet steel, 0.8 mm, powder-coatedtexture
ColourRAL 7035, light-grey
Supply schedule1 Connection board with cable routingMounting material
How suppliedFlat packed kit
doubleprorack Connection PanelWith brush strip
W H D HU/U h d kg Model Order no. UP
554.4 132.5 3 01.243.438.1 1 unit
- For rear panel cover in conjunction with rearpanel shortened accordingly by 3 HU/U
- For doubleprorack width 554.4 mm- With brush strip for cable routing and strain
relief
Finish / ColourPowder-coated texture, RAL 7035,light-grey
Supply schedule1 Connection boardMounting material
How suppliedFlat packed kit
DOP00287
DOP00288
DOP00270
DOP00274
doubleprorack Plinth
W H D HU/U h d kg Model Order no. UP
554.4 100 500 01.240.539.1 1 unit
554.4 100 600 01.240.540.1 1 unit
554.4 100 800 01.240.542.1 1 unit
- For doubleprorack stand-alone enclosure- With levelling feet- With ventilation use- Height = 100 mm
Material / FinishVentilation panel: ABSCovers: sheet steel, 1 mm,powder-coated texture
ColourRack frame, RAL 5008, grey-blueCover panel, RAL 7035, light-grey
Supply schedule1 PlinthMounting material
How suppliedFlat packed kit
DOP00250
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1 9 ” E N C L O S U R E
3.10
doubleprorack Earthing SetFor enclosure
- For earthing top cover/bottom cover- With central earthing bolt
Supply schedule2 Earthlines, length 250 mm4 Spring nuts, M52 Washers4 Cylinder screws, M5 x 101 Earthing bolt
How suppliedFlat packed kit
W H D HU/U h d kg Model Order no. UP
01.243.400.9 1 set
doubleprorack Earthing SetFor doors and trims
- For earthing doors and/or trims Supply schedule5 Earthlines, length 250 mm1 Earthline, length 250 mm,
two-sided AMP plug5 Spring nuts, M55 Cylinder screws, M5 x 10
with tooth lock washer5 Washers
How suppliedFlat packed kit
W H D HU/U h d kg Model Order no. UP
01.245.400.9 1 set
MEC20122
MEC20123
DOP20025
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
3.11
1 9 ” E N C L O S U R E
doubleprorack Mounting Bracket
- For mounting socket strips and cable duct Material / FinishSheet steel, zinc-passivated
Supply schedule2 Mounting bracketsMounting material
How suppliedFlat packed kit
W H D HU/U h d kg Model Order no. UP
01.240.533.9 1 set
doubleprorack Rack Connector
- For mechanical, stabile connection ofenclosure suites
Material / FinishSheet steel, zinc-passivated
Supply schedule4 Rack connectorsMounting material
How suppliedFlat packed kit
W H D HU/U h d kg Model Order no. UP
01.240.525.7 1 set
doubleprorack Base Fixing
- For use in conjunction with levelling feet Material / FinishSheet steel, black zinc-passivated
Supply schedule4 Base fixingsScrews and dowels
How suppliedFlat packed kit
W H D HU/U h d kg Model Order no. UP
01.243.441.3 1 set
DOP00282
DOP00283
DOP00311
See also: the current
Telecom Special Catalogue!Where you will find more products:
• Indoor 19” rack systems
• Outdoor 19” rack systems
• Free-standing and wall cabinets
• Power supply systems
• Thermal management
1 9 ” E N C L O S U R E
3.12
doubleprorack Twin Castor, 50 mm
W H D HU/U h d kg Model Order no. UP
50 01.240.527.9 1 set
- For mobile setup of the doubleprorackstand-alone enclosure with lockable castors
Material / FinishPolyamide, RAL 9011 black
Load rating500 N static
Supply schedule2 Twin castors2 Lockable castors4 Lock washers
How suppliedFlat packed kit
DOP00233
DOP00267
DOP00281
doubleprorack Eyebolt Set
W H D HU/U h d kg Model Order no. UP
01.243.440.9 1 set
- For hanging on crane hooks- Load rating, 1900 N static per ring screw
MaterialTool steel, forged
Supply schedule4 Eyebolts, M 8
How suppliedFlat packed kit
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
4ConActNetwork Wall Enclosure 4.2 to 4.8
4.1
1 9 ” W A L L E N C L O S U R E
19” NetworkWall Enclosure
ConActStrong points 4.2
ConActWall Enclosure 4.6
ConAct AccessoriesExtrusions 4.7Door 4.7Top Cover / Bottom Cover 4.8Earthing Set 4.8
1 9 ” W A L L E N C L O S U R E
4.2
1.Hang rear panel Fix supports and vertical extrusions
2.
Cost-effective– Savings of up to 50% of the
transport volume with flat packpackaging (see figure A)
– Easy transport right up toassembly with space-savingpackaging
– Small packages – low storagespace
"One-person" setup– No unnecessary removal of
enclosure parts as it isdelivered part dismantled
– Rear panel mounting withoutmeasuring using drill holetemplate
– Easy assembly with: – Keyhole punching on the
rear panel (see figure B)– Push-in technology for
mounting rails and covers – Symmetrical enclosure
setup
Unpack – and start the network installation within minutes
A
ACT00024
ACT00031
ACT00004 ACT00005
ConActStrong points
4.3
1 9 ” W A L L E N C L O S U R E
Install cabling and components
3.ACT00006
4. 5.Fit covers ... and the installation is ready!
Cabling made easy– All-side access guarantees
convenient mounting of thecomponents
– Easy cable management withon-site existing cables withopen construction design
– Orderly cable managementwith spacious side jumperingarea and cable clamping railsas accessories(See figures C+D)
C D
Customer specification– Individually configurable
with colour variants or covermounting holes
– 19” or metric installationpossible
– 19” vertical extrusions canbe depth adjusted on 25 mmincrement
– Easy door stop change withshift bolt system (see figure E)
– Ventilation concept can beexpanded at later stages withoptional active ventilation unit
E
ACT00007
ACT00032
ACT00033ACT00030
ACT00008
1 9 ” W A L L E N C L O S U R E
4.4
Glass door with trims in special colours Design door with perforation Enclosure with active ventilation unit
Application examples:
F G Accessories– Easy integration of accessories,
e.g. socket strips with screw-on points on the vertical extru-sion or on the rear panel(see figure F)
– Accessories available fororderly cable management,e.g. cable routing board orjumper bracket (see figure G)
– Comprehensive standardaccessories range available,e.g. shelves, drawers, socketstrips, etc.
Maintenance-friendly– Easy access for servicing is
also guaranteed by removingthe side panels
– Enclosure can be locked withsecurity lock
– Door opening angle ›180°
ACT00017
ACT00033
ACT00020 ACT00025 ACT00021
ACT00034
4.5
1 9 ” W A L L E N C L O S U R E
– In accordance with IEC 297– With fixed 19” installation– For components in accordance with
IEC 297-3– Removable covers– Covers above and below with lateral
vent slots
For installing:– 19” components on the front– 19” components on the rear, optionally
with additional 19” vertical extrusionset
– Equipment with max. constructionwidth of 450 mm
– Installation accessories
19” Installation dimensionsin accordancewith IEC 297-3– Heights: 6 HU / 9 HU / 12 HU / 15 HU /
18 HU / 21 HU / 24 HU(1 HU = 44.45 mm)
– Width: 482.6 mm (19”)
External dimensions– Heights: 352 mm / 486 mm /
619 mm / 752 mm / 886 mm /1019 mm / 1152 mm
– Width: 600 mm– Depths: 400 mm / 500 mm / 600 mm
Rear panel
Side panel
Cable clamping rail
Support
Bottom cover
Cover
Top cover with active ventilation unit
19” vertical extrusion
Sheet steel door
Glass door
Design door, closed(sheet steel)
Design door, perforated(sheet steel)
Grey surfaces = system com-ponents (not included in stan-dard) see p. 7 and 8
Jumpering space– Front: 100 mm (adjustable)– Side: 55 mm
Static load rating500 N
Protection ratingIP 20
StandardsEarthing, VDE 0100 T 540EN 60950, EN 60529
ConfigurationStationary, wall mounting
ACT00038
ConActTechnical data
1 9 ” W A L L E N C L O S U R E
4.6
ConAct Standard 19” Wall-Mounting Rack
W H D HU/U h d (max.) kg Model Order no. UP
600 352 400 6 270 233.6 16 glass door 05.010.000.1 1 unit
600 486 400 9 404 233.6 19 glass door 05.010.001.1 1 unit
600 619 400 12 537 233.6 22 glass door 05.010.002.1 1 unit
600 752 400 15 670 233.6 25 glass door 05.010.003.1 1 unit
600 886 400 18 804 233.6 28 glass door 05.010.004.1 1 unit
600 1019 400 21 937 233.6 31 glass door 05.010.005.1 1 unit
600 1152 400 24 1070 233.6 34 glass door 05.010.006.1 1 unit
600 352 500 6 270 333.6 18 glass door 05.010.007.1 1 unit
600 486 500 9 404 333.6 21 glass door 05.010.008.1 1 unit
600 619 500 12 537 333.6 24 glass door 05.010.009.1 1 unit
600 752 500 15 670 333.6 28 glass door 05.010.010.1 1 unit
600 886 500 18 804 333.6 31 glass door 05.010.011.1 1 unit
600 1019 500 21 937 333.6 34 glass door 05.010.012.1 1 unit
600 1152 500 24 1070 333.6 37 glass door 05.010.013.1 1 unit
600 352 600 6 270 433.6 20 glass door 05.010.014.1 1 unit
600 486 600 9 404 433.6 23 glass door 05.010.015.1 1 unit
600 619 600 12 537 433.6 27 glass door 05.010.016.1 1 unit
600 752 600 15 670 433.6 30 glass door 05.010.017.1 1 unit
600 886 600 18 804 433.6 34 glass door 05.010.018.1 1 unit
600 1019 600 21 937 433.6 37 glass door 05.010.019.1 1 unit
600 1152 600 24 1070 433.6 41 glass door 05.010.020.1 1 unit
- For components in accordance withIEC 297-3
- Accessible from all sides, covers can bequickly removed
- Cable routing via bottom and/or top cover
Jumpering space80 mm (minimum 32, from 80 on the25 mm increment)
Load rating500 N static
Protection ratingIP 20
Material / Finish- Rear panel and basic frame, sheet steel,
zinc-passivated- Removable covers, powder-coated sheet
steel - Front door, single safety glass panel,
textured- 19” vertical extrusions, zinc-passivated
sheet steel
ColourRAL 7035 light-grey
Supply schedule1 Wall enclosure2 19” vertical extrusions1 Cable clamping railMounting material
How suppliedPart assembled
ACT00010
ACT20041
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
4.7
1 9 ” W A L L E N C L O S U R E
������
��������
�����
ACT00035
ConAct Vertical Extrusion, 19”Metric
W H D HU/U h d kg Model Order no. UP
6 19” 05.010.321.9 1 set
9 19” 05.010.322.9 1 set
12 19” 05.010.323.9 1 set
15 19” 05.010.324.9 1 set
18 19” 05.010.325.9 1 set
21 19” 05.010.326.9 1 set
24 19” 05.010.327.9 1 set
6 metric 05.010.311.9 1 set
9 metric 05.010.312.9 1 set
12 metric 05.010.313.9 1 set
15 metric 05.010.314.9 1 set
18 metric 05.010.315.9 1 set
21 metric 05.010.316.9 1 set
24 metric 05.010.317.9 1 set
- For front and/or rear installation in theenclosure
Material / FinishSheet steel, 1.5 mm, zinc-passivated
Supply schedule2 Vertical extrusionsMounting material
ConAct Sheet Steel Door
W H D HU/U h d kg Model Order no. UP
6 05.010.421.1 1 unit
9 05.010.422.1 1 unit
12 05.010.423.1 1 unit
15 05.010.424.1 1 unit
18 05.010.425.1 1 unit
21 05.010.426.1 1 unit
24 05.010.427.1 1 unit
- For use instead of glass door
Material / FinishSheet steel, powder-coated texture
ColourRAL 7035 light-grey
Supply schedule1 Steel doorMounting material
How suppliedFlat packed kit
NoteIn project cases we also deliver ourConAct wall enclosure with sheet steeldoor. Please contact us at your leisure.
ACT00029
ACT20027
ACT00012
ACT00028
19”
Metric
1 9 ” W A L L E N C L O S U R E
4.8
ConAct Earthing Set
W H D HU/U h d kg Model Order no. UP
05.010.330.9 1 set
W H D HU/U h d kg Model Order no. UP
05.010.340.9 1 set
- For earthing all covers on the enclosureframe
Supply schedule5 Earth conductors, 6 mm2
Mounting material
ConAct Cable Clamping Rail
- For cable clamping using U-clamps, cableclamping bar or hammer head threadedplate
- For mounting on rear panel
Material / FinishSheet steel, zinc-passivated
Supply schedule1 Cable clamping railMounting material
How suppliedFlat packed kit
ACT00041
ConAct Top Cover/Bottom Cover with Active Ventilation UnitWith thermostat
W H D HU/U h d kg Model Order no. UP
600 400 05.010.303.1 1 set
600 500 05.010.304.1 1 set
600 600 05.010.305.1 1 set
- Can be used instead of the standard topcover/bottom cover
- With thermostat for regulating the internaltemperature for forced ventilation
- Airflow: 59 m3/h per fan- With cable entry via brush strip- No loss of installation height- Easily accessible for service work via flange
panel
Material / FinishSheet steel, powder-coated
Fan technical data- Volume flow, free blowing:
59 m3/h per fan- Noise, free blowing:
35 dB(A) per fan
Technical data, thermostat- Setting range: 10 - 60°C- Mains supply: 230 V / 50 Hz- Contact type: Changeover contact with
snap action characteristic- Contact rating: 10 A (4) 250 CAC (break),
5 A (2) 250 VAC (make)- Interference suppression level: “N” (in
accordance with VDE 0875)- Connections: 4-pin terminal, 2.5 mm2
ColourRAL 7035 light-grey
Supply schedule1 Cover1 Ventilation unit with 2 fans, ready for
connection, cabled with thermostat
ACT00027
ACT00026
MIR00641
ACT00006_A
4SoHoSmall Office - Home OfficeNetwork Wall Enclosure 4.10 to 4.14
4.9
1 0 ” / 1 9 ” W A L L E N C L O S U R E
NetworkWall Enclosure
SOHOStrong points 4.10
SOHOWall Enclosure 4.11
SOHO AccessoriesMounting Panel 4.12Earthing Set 4.12Earthing Bar 4.12Contact Clamp 4.1210” Blanking Plate 4.1310” Cable Port 4.1310” Shelf 4.1410” Socket Strip 4.14
SoHo Wall EnclosureStrong points
1 0 ” / 1 9 ” W A L L E N C L O S U R E
4.10
ACT200441
User-friendly access from 2 sideswith removable covers
For mounting 19” or 10” compo-nents
Easy cable management withcable ports and cable clampingintegrated in the top cover/bottom cover
Fixing option for non-standardcomponents using an additionalmounting panel
4
3
2
1
ACT200462
ACT200453
ACT200434
ACT200502
4.11
1 0 ” / 1 9 ” W A L L E N C L O S U R E
SoHo Wall Enclosure, 10” / 19”
WW H D HU/U h d kg Model Order no. UP
500 540 320 10 (5) with steel door 05.012.001.1 1 unit
500 540 320 10 (5) with steel door 05.012.001.8 1 unit
500 540 320 10 (5) with glass door 05.012.002.1 1 unit
500 540 320 10 (5) with glass door 05.012.002.8 1 unit
- For mounting 10” components (horizontal)or 19” components (vertical)
- Removable covers
MaterialSheet steel coversSide door, sheet steel or with singlesafety glass panel
FinishPowder-coated texture, RAL 7035,light-grey
ColourFinal digit of order number .1:RAL 7035, light-greyFinal digit of order number .8:RAL 7021, dark-grey
Supply schedule1 Main unit with 10”/19” mounting frame,
brush strip on the bottom cover and topcover for cable entry
1 Side panel, screwed1 Front panel, hinged on both sides1 Side door, lockable
How suppliedFully assembledACT20048
ACT20030
ACT20042
SoHo Earthing Set
W H D HU/U h d kg Model Order no. UP
05.012.092.9 1 set
- For earthing all covers on the enclosure Supply schedule3 Earth conductors
How suppliedFlat packed kit
ACT20039
ACT20047
1 0 ” / 1 9 ” W A L L E N C L O S U R E
4.12
SoHo Mounting Panel
W H D HU/U h d kg Model Order no. UP
05.012.120.0 1 unit
- For mounting non-standard components- Fixing using cable ties, Velcro strips
Material / FinishSheet steel, zinc-passivated
Supply schedule1 Mounting panelFixing screws
How suppliedFlat packed kit
ACT20049
ACT20043
SoHo Earthing Bar
W H D HU/U h d kg Model Order no. UP
12 01.110.703.9 1 set
- For safe earthing and equipotential bondingof equipment and installation components
MaterialElectrolyte copper
Supply schedule1 Earthing bar2 BracketsMounting material
ELM00068
SoHo Contact Clamp
W H D HU/U h d kg Model Order no. UP
01.110.715.9 20 units
- For secure connection of equipment andinstallation components with the earthingbar
Supply schedule20 Contact clamps
DOP20016
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
4.13
1 0 ” / 1 9 ” W A L L E N C L O S U R E
10” Blanking Panel
WW H D HU/U h d kg Model Order no. UP
254 43.6 1 05.012.101.1 1 unit
- For covering free front areas MaterialSheet steel
FinishPowder-coated texture, RAL 7035,light-grey
Supply schedule1 10” Blanking panel
How suppliedFlat packed kit
ACT20032
ACT20036
ACT20033
10” Cable Routing Panel
W H D HU/U h d kg Model Order no. UP
254 43.6 1 05.012.106.1 1 unit
- For routing cables in the rack interior- With edge protector
MaterialSheet steel
FinishPowder-coated texture, RAL 7035,light-grey
Supply schedule1 10” Cable routing panel
How suppliedFlat packed kit
10” Cable Routing Board
W H D HU/U h d kg Model Order no. UP
254 43.6 1 05.012.107.1 1 set
- For safe and orderly cable management offibre optic and copper cables
MaterialSheet steel
FinishPowder-coated texture, RAL 7035,light-grey
Supply schedule1 10” Front panel3 Cable routers
How suppliedFlat packed kit
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
1 0 ” / 1 9 ” W A L L E N C L O S U R E
4.14
10” Shelf
W H D HU/U h d kg Model Order no. UP
254 43.6 1 05.012.110.1 1 unit
- Simple and quick assembly on 10”extrusions
MaterialSheet steel
FinishPowder-coated texture, RAL 7035,light-grey
Supply schedule1 ShelfMounting material
How suppliedFlat packed kit
10” Compact Socket Strip
L S n F1 F2 10” safe Model Order no. UP
254 43.6 3 ● ● 03.300.003.1 1 set
Material / FinishCasing: closed sheet-steel extrusion,zinc-passivated, powder-coated texture,RAL 7035 Plastic parts: polyamide PA6 (UL 94 V0)Internal conductor: full-length busbar,brassCable: PVC
Supply schedule1 Socket strip, with 3 sockets2 Mounting brackets
How suppliedFlat packed kit
ACT20035
ACT20034
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
5CablingCable Management 5.2 to 5.27
5.1
C A B L E M A N A G E M E N T
CableManagement
CablingCable Routing Board 5.5MultifunctionalCable Routing Strut 5.7Cable Routing 5.8C-Shaped Runner 5.10Cable Trough 5.13Radial Limiter 5.14Excess Cable Storage 5.16Jumpering Bracket 5.18Cable Routing Components 5.23Velcro Strip 5.24Cable Cantilever Girder 5.25
C A B L E M A N A G E M E N T
5.2
5.3
C A B L E M A N A G E M E N T
It must be ensured when layingcables that every type of mechani-cal stress is avoided.
Bending loadsThe bending radii may never beless than the values provided bythe cable manufacturer in therespective data sheets. At pointsthat bend too much, the electricalproperties of the cable changeand reduce the transmissionbandwidths and ranges. If manu-facturer specifications are notavailable, then the following ruleof thumb applies: With loose cab-ling, at least 15 times the exter-nal cable diameter and with fixedcabling, at least 10 times theexternal cable diameter.
Kink stressThe most extreme bending loadscan cause the cable to break.
Tensile stressThis is only determined by thecopper cross-section of the con-ductor, as all other materials aretoo soft. The cable may not bestressed more than 50N/mm2
(Cu cross-section) as otherwisethe conductors are stretched andthe cross-section is reduced.If higher “pulling” forces arerequired, then cables withadditional strain relief elementsmust be used.
Compressive stressCompressive stress is caused byloads bearing down from above,fixed clamping or sharp cablekinking and must always be avoi-ded, as otherwise the “loose”cable structure changes and theelectrical transmission propertiesare impaired.
Torque strains (Twisting)These must never have an effecton the cable, as they drive thecable elements into one anotherand therefore impair the trans-mission properties.
Cable ManagementStrong points
MEC20064
MEC20074 MEC20058
MEC20084
MEC20086
LIG00021
C A B L E M A N A G E M E N T
5.4
Different components forfibreglass and copper cables,especially the fastening optionsusing Velcro strips and cablebundling using different colouredstrips, guarantee transparentcable management, which is theoptimum starting situation for anintelligent expansion of the net-work and for the highest stan-dard of service convenience.
1 With all cable management com-ponents, special attention hasbeen paid in ensuring that fixingcan be made using Velcro stripcable ties. Velcro cable ties notonly guarantee a stress-freefixing of the cable, but rather canalso be released at any time andre-used again and again. Velcrocable ties are also extremely helpful for the installationengineer in providing pinch-freecable bundling, and also becausethey are so quick to apply.
The storage of excess cablelengths is made separated fromthe patch fields, however in aposition that is always easilyaccessible. Copper cable excesscan be stored separate fromfibreglass excess lengths withinthe Knürr rack systems.The copper cables are storedhanging on a side and the moresensitive fibreglass cables arestored flat in a front-accessibleexcess length drawer.
A closer look at the individualproducts reveals that some pos-sess an inherent “multitalent”.The multifunctional cable routingstrut, for example, not only pro-vides the option of routing cableshorizontally and vertically usingVelcro ties or cable ties, butrather also allows numerouscomponents to be mounted usingscrews and caged nuts. Thesecaged nuts can also be shiftedwith room for play in a slot, sothat every mounting dimensioncan be accommodated.
The prescribed radii are presetwith the radial limiter. Thesecomponents ensure that neithera reduction of the transmissionbandwidths and ranges nor acable break occur.
5
4
3
2
Cable ManagementStrong points
MEC200821
MEC200702 MEC200993
MEC200793 MEC200774
MEC200914 MEC200715
MEC20102
5.5
C A B L E M A N A G E M E N T
19” Cable Routing Board, 1 HU
W H D HU/U Model Order no. UP
1 type 1 01.117.044.1 1 unit
1 type 2 01.117.144.1 1 unit
- For orderly cable routing- For safe and secure cable routing of copper
and fibreglass cables
Material / FinishFront panel, sheet steel, 1.5 mmPowder-coated, RAL7035 light-grey
External dimensionsCable routing:Type 1: 55 x 22 mm, plasticType 2: 95 x 32 mm, steel
Supply schedule1 19” Front panel5 Cable routing boards
How suppliedFlat packed kit, preassembled
NotePlease also order front panel mountingmaterial.
MEC00110
MEC20041
MEC20014
Type 1
Type 2
19” Cable Routing Board, Flexible, 1 HU
W H D HU/U Model Order no. UP
1 05.040.100.1 1 unit
2 05.040.101.1 1 unit
- For orderly cable routing- For safe and secure cable routing of copper
and fibreglass cables
Material / FinishFront panel, sheet steel, 1.5 mmPowder-coated texture, RAL 7035Jumpering bracket, round steel,d = 5 mm, zinc-passivated
External dimensionsCable routing:1 HU: 82 x 43 mm2 HU: 102 x 82 mm
Supply schedule1 Front panel5 Cable routing boardsAssembly material
How suppliedFlat-packed kit
NotePlease also order front panel mountingmaterial.
MEC20150
MEC20076
MEC20103 Type 1 MEC20104 Type 2
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
CUD00023
C A B L E M A N A G E M E N T
5.6
MEC20081
Fibre Optic Cable Routing Board, 1 HU
W H D HU/U Model Order no. UP
1 Cable routing board 05.040.050.1 1 unit
Accessories: Cover 05.040.051.1 1 unit
- For orderly cable routing- For safe and secure cable routing of fibre
optic cables- Optionally with cover panels to protect the
cables and as labeling option
Material / FinishSheet steel, 1.5 mmPowder-coated texture, RAL 7035
Supply schedule1 19” Cable routing board
How suppliedIn units
NotePlease also order front panel mountingmaterial and cover.
MEC20058
MEC20105
Cable Routing Panel, 1 HU
CUD00021
CUD00022
- For orderly cable management in the rackinternal space
- With edge protector
Material / FinishSheet steel, 1.5 mmPowder-coated texture, RAL 7035
Supply schedule1 19” Cable routing panel
How suppliedIn units
NotePlease also order suitable front panel mounting material.
W H D HU/U Model Order no. UP
19“ 44.5 1 01.117.020.1 1 unit
19“ 88.1 2 01.117.022.1 1 unit
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
5.7
C A B L E M A N A G E M E N T
Cable Routing Strut
- For mounting on the miracel/smaract basicrack and on the 19” extrusion
- For cable clamping using Velcro strips,cable ties
- For orderly cable management in the rack- For universal mounting option using caged
nuts (all dimensions can be accommodated,as caged nuts are flexible)
Material / FinishSheet steel, 1.5 mm, zinc-passivated
Supply schedule1 Cable routing strutMounting material
How suppliedIn units
NoteIf required, please also order Velcro strip.
MEC20091
MEC20078
W H D L Model For rack type Order no. UP
600 455 Item 1 miracel 05.040.001.0 1 unit
800 655 Item 1 miracel 05.040.003.0 1 unit
900 755 Item 1 miracel 05.040.004.0 1 unit
1000 855 Item 1 miracel 05.040.005.0 1 unit
600 534 Item 2 miracel/smaract 05.040.008.0 1 unit
800 734 Item 2 miracel 05.040.010.0 1 unit
19” 468 Item 3 miracel/smaract/dpr 05.040.011.0 1 unit
MIR00090
MIR00089
MIR00090
Multifunctional Strut
W H D HU/U d Model For rack type Order no. UP
600 position 1 miracel 01.130.775.0 1 unit
800 position 1 miracel 01.130.776.0 1 unit
900 position 1 miracel 01.130.777.0 1 unit
1000 position 1 miracel 01.127.690.0 1 unit
600 position 2 miracel/smaract 01.130.783.0 1 unit
800 position 2 miracel 01.130.785.0 1 unit
600–800 position 3 miracel/smaract/doubleprorack 01.130.787.0 1 unit
600 365 position 4 miracel/smaract LAN 01.130.778.0 1 unit
800 565 position 4 miracel/smaract LAN 01.130.779.0 1 unit
600 440 position 4 miracel/smaract 19” 01.130.780.0 1 unit
800 640 position 4 miracel/smaract 19” 01.130.781.0 1 unit
900/1000 740 position 4 miracel/smaract 19” 01.130.782.0 1 unit
- For routing cables with cable ties and foruniversal mounting option
- Holes for mounting caged nuts- Distance between two multifunctional struts
can be variably selected using T-slot- Installation on the extrusions of the rack
frame or on the 19” extrusions, diagonal andlateral
- Type A – For universal application- Type B – Especially for fixing cable ties,
no threading required
MaterialSheet steel, 1.5 mm
FinishZinc-passivated
Installation positions1 on the basic rack on the depth2 on the basic rack on the width3 on the 19” extrusions on the width4 on the 19” extrusions on the depth
Supply schedule1 Multifunctional strut
C A B L E M A N A G E M E N T
5.8
Cable Trough
MEC20088
MEC20067
- For orderly cable management in themiracel rack
- Mounting cables using Velcro strips orcable ties
- Combination possible as L, U or T unit
Material / FinishSheet steel, 1.5 mm, zinc-passivated,powder-coated, RAL 7035, light grey
DimensionsL 150 x W 28 mm
Supply schedule1 Cable troughMounting material
How suppliedFlat packed kit
NoteIf required, please also order Velcro strip.
W H D HU/U Model Order no. UP
41 for rack type - miracel 05.040.021.1 1 set
46 for rack type - miracel 05.040.022.1 1 set
Cascading
W H D Order no. UP
05.040.088.9 1 set
- For orderly cable management and forcable clamping
- Can be expanded
Material / FinishBase plate: sheet steel, powder-coatedtexture, RAL 7035Foam: polyethylene, anthracite
Supply schedule2 End plates with foam3 Plates with foam on both sidesMounting material
How suppliedFlat packed kit
MEC20045
MEC20074
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
5.9
C A B L E M A N A G E M E N T
Assembly Crossbar
- For cable management with Velcro strips- Universal mounting options for installation
accessories such as, socket strips, commu-nications installation units, mountingpanels, etc.
- For lateral and diagonal installation
Material / FinishSheet steel, 1.5 mm,powder-coated texture, RAL 7035
Supply schedule1 Assembly crossbar
How suppliedIn units
NotePlease also order the appropriatemounting material.
W H D HU/U b1 b2 X Type Model Order no. UP
600 1 389 314 31 1 Item 1: miracel 05.040.014.1 1 unit
800 1 589 514 31 1 Item 1: miracel 05.040.016.1 1 unit
19” 1 482 442.6 81.5 1 Item 2: miracel/smaract 05.040.018.1 1 unit
19” 1 2 Item 2: doubleprorack 05.040.019.1 1 unit
MEC20136
MEC20137
MIR00094 MEC20120 Type 1 MEC20121 Type 2
Type 1
Type 2
See also: the current
Telecom Special Catalogue!Where you will find more products:
• Indoor 19” rack systems
• Outdoor 19” rack systems
• Free-standing and wall cabinets
• Power supply systems
• Thermal management
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
C A B L E M A N A G E M E N T
5.10
C-Shaped Runner
- For cable clamping using U-clamps orcable clamping bars
Material / FinishSheet steel, 1.5 mm, zinc-passivated
Supply schedule1 C-shaped runnerMounting material
How suppliedFlat packed kit
NotePlease also order U-clamps, cableclamping bars or threaded plates.
W H D d L Model Order no. UP
600 511 Item 1: miracel 01.130.858.9 1 set
800 711 Item. 1: miracel 01.130.860.9 1 set
600 570 Item 2: miracel 01.130.859.9 1 set
700 670 Item 2: miracel 01.130.853.9 1 set
800 770 Item 2: miracel 01.130.861.9 1 set
19” 508 Item 3: miracel/smaract/doubleprorack 01.110.719.9 1 set
365 320 Item 4: miracel/doubleprorack 01.113.790.9 1 set
565 520 Item 4: miracel/doubleprorack 01.113.791.9 1 set
MIR00096
MIR00095
MIR00090
C-Shaped Runner
- For cable clamping using U-clamps- Cable clamping closer to access- Suitable for use in conjunction with cover
with sliding top and fan cover
Material / FinishSheet steel, 1.5 mm, zinc-passivated
Supply schedule1 C-shaped runnerMounting material
How suppliedFlat packed kit
NotePlease also order U-clamps, cableclamping bars or threaded plates.MIR00096
MEC20100
W H D L Model Order no. UP
600 460 05.040.080.0 1 set
800 660 05.040.082.0 1 set
5.11
C A B L E M A N A G E M E N T
MEC00113
1
W
D
2
MIR00525
C-Shaped Runner
W H D d L Model Order no. UP
- 600 455 type 1 miracel 01.130.865.9 1 unit
- 800 655 type 1 miracel 01.130.866.9 1 unit
- 900 755 type 1 miracel 01.127.680.9 1 unit
- 1000 855 type 1 miracel 01.127.681.9 1 unit
600 - 534 type 1 miracel/smaract 01.130.867.9 1 unit
800 - 634 type 1 miracel/smaract 01.130.868.9 1 unit
600/800 600/800 302 type 2 miracel/smaract 01.130.862.9 1 unit
- For cable clamping using U-clamps or cableclamping bars. Mounting is made space-saving between the extrusions of the basicrack.
Material / FinishSheet steel, 1.5 mm, zinc passivated
Supply schedule1 Extrusion railMounting material
How suppliedFlat packed kit
NotePlease also order U-clamps, cableclamping bars or threaded plates.
Type 1
Type 2
Top-Mounting for Cable Trays
- Mounting cable trays usingC-shaped runners
- Freely selectable positioning
Material / FinishC-Shaped runner: Sheet steel,zinc-passivatedMounting bracket: Sheet steel, poweredtexture, RAL 7035
Supply schedule2 C-shaped runners4 Mounting bracketsMounting material
How suppliedFlat packed kit
NotePlease order U-clamps, cable clamping bars or threaded plates.MIR20198
MEC20034
W H D Order no. UP
600 05.040.070.9 1 set
800 05.040.072.9 1 set
900 05.040.073.9 1 set
1000 05.040.074.9 1 set
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
C A B L E M A N A G E M E N T
5.12
ELM00086
U-Clamp
- For strain relief and individual routing ofcables and lines
- Clamping range, 8-64 mm
Supply schedule1 U-clamp1 Clamping saddle
How suppliedFlat packed kit
W H D HU/U d L Clamping range Order no. UP
8-12 mm 01.110.711.9 1 unit
12-16 mm 01.110.712.9 1 unit
16-22 mm 01.110.713.9 1 unit
22-28 mm 01.110.714.9 1 unit
34-40 mm 01.113.176.9 1 unit
40-46 mm 01.113.127.9 1 unit
46-52 mm 01.113.128.9 1 unit
52-58 mm 01.113.177.9 1 unit
58-64 mm 01.113.178.9 1 unit
MIR00096
MEC00114
Cable Clamping Strip
W H D HU/U d L Model Order no. UP
01.130.869.9 10 units
- For clipping to the C-shaped runner
MaterialPolyamide, black
Supply schedule1 Set of 10 cable clamping strips
How suppliedFlat packed kit
Threaded Plate, M5
W H D L Order no. UP
05.040.077.9 1 set
- For use in conjunction with C-shapedrunners
Material / FinishFlat rolled steel, 4.0 mm, zinc-passivated
Supply schedule20 Threaded plates
How suppliedFlat packed kit
MEC20051
MEC20069
5.13
C A B L E M A N A G E M E N T
19” Cable Trough
MEC20049
MEC20063
- For orderly cable management in front ofthe 19” front
- Mounting possible on the front panels- Cable fixing possible using Velcro strips
Material / FinishSheet steel, 1.5 mmPowder-coated texture, RAL 7035
Supply schedule1 Cable trough
How suppliedIn units
NotePlease also order suitable front panelmounting material and Velcro strip.
W H D HU/U Model Order no. UP
19” 100 1 05.040.055.1 1 unit
Cable Trough Between the Racks
MEC20042
MEC20119
- For orderly cable management betweenlinked racks
- Mounting possible using Velcro strips
Material / FinishSheet steel, 1.5mmPowder-coated texture, RAL 7035
Supply schedule1 Cable troughMounting material
How suppliedFlat packed kit
NotePlease also order Velcro strip
W H D HU/U Model Order no. UP
265 60 05.040.058.1 1 unit
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
C A B L E M A N A G E M E N T
5.14
Radial Limit
W H D L Order no. UP
05.040.090.0 1 set
- Various installation options available:- on the basic rack for cable clamping- on the 19” extrusion for cable rerouting
and cable management- For use in conjunction with C-shaped
runners (also order threaded plates!)
Material / FinishSheet steel, 1.5 mm, zinc-passivated
Supply schedule1 Radial limitMounting material
How suppliedFlat packed kit
Radial Limit, 1 HU
- For vertical cable rerouting from the patcharea
- The cables can be fixed with Velcro strips- Lateral use in conjunction with the cable
duct is possible
Material / FinishSheet steel, 1.5mm,powder-coated texture, RAL 7035
Supply schedule1 Radial limit1 Mounting panelMounting material
How suppliedFlat packed kit
MEC20090
MEC20071
W H D HU/U Model Order no. UP
85 32 1 05.040.091.1 1 set
MEC20132
MEC20143
5.15
C A B L E M A N A G E M E N T
Cable Duct, Side
- For orderly cable routing- Use in conjunction with the front trim, pivots- Cable rerouting with radial limiter, 1 HU
(optional)
Material / FinishSheet steel, 1.5mmPowder-coated texture, RAL 7035
Supply schedule1 Cable ductMounting material
How suppliedFlat packed kit
MEC20135
MEC20151
W H D HU/U Model Order no. UP
100 130 41 05.040.023.1 1 set
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
C A B L E M A N A G E M E N T
5.16
Cu (Copper) Excess Cable Storage
MEC20052
MEC20079
- For storing excess copper cables(or fibre optic cables)
- For orderly cable management in themiracel rack
- Can be expanded
Material / FinishSheet steel, 1.5 mm, zinc-passivated
Supply schedule1 Excess cable holderMounting material
How suppliedFlat packed kit
W H D HU/U Model Order no. UP
for rack type - miracel 05.040.044.0 1 set
19” Excess Fibre Optic Cable Drawer, 1HU
MEC20047
MEC20099
- For excess fibre optic cable storage- Pull-out- Cable fixing possible using Velcro strips
Material / FinishSheet steel, 1.5 mmPowder-coated texture, RAL 7035
Supply schedule1 Main unit1 Drawer
How suppliedFlat packed kit
NotePlease also order suitable front panelmounting material and Velcro strip.
W H D Model Order no. UP
19” 43.6 350 05.040.047.1 1 set
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
5.17
C A B L E M A N A G E M E N T
Excess Fibre Optic Cable Storage
MEC20044
MEC20146
- For orderly cable management of fibre opticcables in the miracel rack (from W 800 mm)
- For excess cable storage
Material / FinishBase plate: powder-coatedtexture, RAL 7035Cable holder: polyamide, black
Supply schedule1 Base plate1 Cable holderMounting material
How suppliedFlat packed kit
W H D HU/U Model Order no. UP
2 05.040.041.1 1 set
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
C A B L E M A N A G E M E N T
5.18
Jumpering Bracket, Universal
MIR00096
MEC20072
- Can be used for extrusion spacing(from front), 123 mm and 73 mm
- For tidy and orderly cable management- Open version, no tedious cable looping- Mounting on the external side of the 19”
extrusion- Installation position freely selectable
Material / FinishRound steel, d = 6 mm, zinc-passivated
Supply schedule1 Jumpering bracket
How suppliedIn units
NotePlease also order the appropriatemounting material.
W HU/U Model Order no. UP
from 800 for rack type - miracel 05.040.025.0 1 unit
Jumpering Bracket, Rectangular
MEC20039
MEC20107
- For tidy and orderly cable management- Open version, no tedious cable looping- Mounting on the external side of the 19”
extrusion- Installation position freely selectable- For large cable volumes
Material / FinishRound steel, d = 6 mm, zinc-passivated
Supply schedule1 Jumpering bracket, rectangular
How suppliedIn units
NotePlease also order the appropriatemounting material.
W Model Order no. UP
from 800 for rack type - miracel 05.040.028.0 1 unit
MEC20106
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
5.19
C A B L E M A N A G E M E N T
ELM00006
Jumpering Bracket, Rectangular
- For tidy and orderly cable management- Open version, no tedious cable looping- Mounting on the external side of the 19”
extrusion- Installation position freely selectable
Material / FinishRound steel, d = 5 mm, zinc-passivated
Supply schedule1 Jumpering bracket, rectangular
How suppliedIn units
NotePlease also order the appropriatemounting material.
W H D HU/U Model Order no. UP
from 700 miracel 01.117.179.7 1 unit
600 smaract 01.117.179.7 1 unitMEC20116
See also: the current
Telecom Special Catalogue!Where you will find more products:
• Indoor 19” rack systems
• Outdoor 19” rack systems
• Free-standing and wall cabinets
• Power supply systems
• Thermal management
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
C A B L E M A N A G E M E N T
5.20
MEC20035
ELM00117
75
50
25
65
55
ELM00106
MEC20065
Jumpering Bracket, Flexible
- For flexible and orderly cable management- Installation place and position freely selec-
table- Open version, no tedious cable looping
Material / FinishRound steel, d = 5 mm, zinc-passivated
Supply schedule1 Jumpering bracketMounting material
How suppliedFlat packed kit
Jumpering Bracket, Rectangular
- For tidy and orderly cable management- Open version, no tedious cable looping- Mounting on the external lateral T-slot of
the 19” extrusion- Installation position freely selectable
Material / FinishRound steel, d = 5 mm, zinc-passivated
Supply schedule1 Jumpering bracket
How suppliedFlat packed kit
NotePlease also order the appropriatemounting material.
W H D A a B b Model Order no. UP
82 72 43 33 fig. 1 05.040.031.0 1 set
222 212 30 20 fig. 3 05.040.032.0 1 set
102 92 82 72 fig. 2 05.040.033.0 1 set
MEC20108
W H T For rack type Order no. UP
doubleprorack 01.240.551.7 1 set
1
2
3
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
5.21
C A B L E M A N A G E M E N T
Jumpering Bracket
- For tidy and orderly cable management- Open version, no tedious cable looping
Material / FinishRound steel, d = 5 mm, zinc-passivated
Supply schedule1 Jumpering bracket
How suppliedFlat packed kit
NotePlease also order the appropriatemounting material.
MIR00564
5
20 38
60
95
MEC00122
W H D Model Order no. UP
95 x 60 mm 01.129.153.7 1 set
Jumper Tiebar
W H D HU/U d L Model Order no. UP
01.117.033.7 2 units
- Ideal for vertical routing and cable strainrelief
- Open version, no tedious cable looping- Mounting on the external lateral T-slot of
the 19” extrusion- Installation position freely selectable- From rack width 600 mm
Material / FinishRound steel, d = 5 mm, zinc-passivated
Supply schedule2 Jumper tiebars
How suppliedFlat packed kit
NotePlease also order the appropriatemounting material.
ELM00028
147
857
70.1
28.5 11.5
38
180
5
ELM00029
C A B L E M A N A G E M E N T
5.22
Jumpering Bracket, Square
W H D HU/U d L Model Order no. UP
86 x 86 01.113.744.7 1 unit
W H D HU/U d L Model Order no. UP
218 x 60 01.129.152.7 1 unit
- For tidy and orderly cable management- Open version, no tedious cable looping- Mounting on the external lateral T-slot of
the 19” extrusion- Installation position freely selectable- From rack width 800 mm
FinishZinc-passivated, Zn 10c, white
Supply schedule1 Square jumpering bracket
Jumpering Bracket, Vertical
- For tidy and orderly cable management- Mounting on the mounting rail and on the
side on the rack T-slot- Open version, no threading
Material / FinishRound steel, d = 6 mm, zinc-passivated
Supply schedule1 Jumpering bracket
How suppliedIn units
NotePlease also order the appropriatemounting material.
MIR00183
86
86
14
5
20 38
ELM00057
MIR00566
5.5
20
13
25
59
6
218
183
60
38
MEC00123
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
5.23
C A B L E M A N A G E M E N T
Cable Routing Ring
W H D HU/U d L Model Order no. UP
54 x 118 mm 01.312.207.9 5 units
- For tidy and orderly cable management- Open version, no tedious cable looping- Mounting on the T-slots of the vertical
extrusions- Installation position freely selectable
Material / FinishPA 6, GF 10, grey, UL 94-V1
Supply schedule5 Cable routing ringsMounting material
How suppliedFlat packed kit
ELM00025
ELM00026
Cable Routing Set
W H D HU/U d L Model Order no. UP
60 x 43 mm 01.117.528.9 10 units
- For tidy and orderly cable management- Dimensions:
external, 61 mm x 42.5 mminternal, 52 mm x 23 mm
Material / FinishPA 6, GF 30, grey, UL 94-V0
Supply schedule10 Cable routers
How suppliedFlat packed kit
NotePlease also order the appropriatemounting material.
MEC00112
Fibre Optic Cable Router
W H D HU/U d L Model Order no. UP
01.117.099.1 1 pair
LIG00068
LIG00021
- For safe and orderly cable management offibre optic cables
- With step-index extrusion of the slots toprovide strain relief of the fibre optic cables
- Mounting on the external side T-slot of the19” extrusion
MaterialPA UL 94 VO
Supply schedule1 Pair of fibre optic cable routersMounting material
How suppliedFlat packed kit
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
C A B L E M A N A G E M E N T
5.24
Velcro Strip with Plastic Eyelet
- For mounting non-standard components- For bundling cables
Material / ColourPolypropylene/polyamide, black
Supply schedule20 Velcro strip cable ties
How suppliedFlat packed kit
W H D L Model Order no. UP
16 300 01.240.550.9 1 set
Velcro Strip (in meters)
MEC20048
MEC20147
MEC20025
MEC20026
- For stress-free mounting and bundling ofcopper and fibre optic cables
- Velcro strip can be cut to any lengthrequired
Material / ColourBlack: One Wrap FastenerF.R.T., UL 94-V2Blue: One Wrap Fastener
Supply schedule1 Meter or 25 meter Velcro strip
How suppliedMeter strips
W H D L Model Order no. UP
16 1000 black 05.040.060.9 1 meter
16 1000 blue 05.040.061.9 1 meter
16 25000 black 05.040.065.9 25 meters
16 25000 blue 05.040.066.9 25 meters
ELM00049
125
10
31
ELM00050
Cable Tie Clip
W H D HU/U d L Model Order no. UP
01.240.548.9 20 units
- For tidy and orderly cable management- For fixing cable harnesses and cables with
large cross section- Simple and quick mounting- For clipping into T-slots at any position- With detachable lock
MaterialPA 6.6, black, UL 94-V0
Supply schedule20 units
How suppliedFlat packed kit
5.25
C A B L E M A N A G E M E N T
Cable Clamping Frame
W H D HU/U d L Model Order no. UP
01.113.153.9 1 unit
- For orderly cable management- Open version, no threading- Cross-section for cable routing, variable
with removable routing ribs- Can be expanded by adding on further cable
clamping frames- Mounting optional lengthways or across the
width
MaterialPolypropylene, black
Supply schedule1 Cable clamping frameMounting material
How suppliedFlat packed kit
ELM00024
MEC20017
Cable Cantilever Girder
W H D HU/U d W x L For rack type Order no. UP
05.040.095.0 1 unit
- Swing-out from the rear, therefore freeaccess to the rear side
- For simple mounting in rack/on the shelf;quick connecting to and disconnecting fromshelf or rack with a spring clip
- Guarantees defined and kink-free cablemanagement
- Minimum space requirement behind thepushed in shelves, 40 mm
Material / FinishSheet steel, 1.5 mm, zinc-passivated
Supply schedule1 Cable cantilever girderMounting material
How suppliedFlat packed kit
MEC20094
MEC00125 MEC00126 MEC00127
MEC20101
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
C A B L E M A N A G E M E N T
5.26
Cable Roller
W H D HU/U d L Model Order no. UP
05.043.327.9 1 unit
- For 19” racks and enclosures- Reduces the cable load on the chassis- Orders the cables- Prevents cable-sagging
MaterialSheet steel, 1.5 mm
Supply schedule1 Cable roller
TEL00034
TEL00051
Cable Clamping Bracket / Earthing Bracket
W H D HU/U d L Model Order no. UP
01.117.035.7 1 unit
CUD00025
CUD00024
- For 19” cable routing panel, 2 HU- For strain relief of cables and plug-type
connections with cable ties
MaterialSheet steel, 1.5 mm
FinishZinc-passivated, Zn 10c, white
Supply schedule1 Earthing bracketMounting material
CUD00026
Cable Clips
W H D HU/U d L Model Order no. UP
05.041.066.7 100 units
- Conductive surface for good bond Supply schedule100 cable clips
Cable Clamping, Swing Frame
W H D HU/U d L Model Order no. UP
01.113.203.1 1 set
- Absolutely recommended when using swingframe
- For cable strain relief - For relief of plug-type connections- Prevents damage to the cable braided
shielding
Supply schedule2 Mounting brackets1 Extrusion railMounting material
MIR00086
529
40
482.5
501
197.
5
218
MIR00182
5.27
C A B L E M A N A G E M E N T
Cable Duct
W H D HU/U d L Model Order no. UP
2000 01.117.098.3 1 unit
- Ideal for orderly and covered cablemanagement of jumper cables
MaterialHard PVC
FinishStone-grey, RAL 7030
Supply schedule1 Jumper cable duct with coverMounting material
ELM00004
107
65
ELM00052
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
E X P R E S S I T E M
Rapid Service
Express itemSwift express delivery service,smooth ordering process,attractive pricing and a market-oriented offer – that’s Knürrreliability!
Each express item that ismarked accordingly in thiscatalogue, leaves ourEuropean central store24 hours after your order isreceived. High-grade qualityand standardised solutionsthat always leave you thatdecisive step ahead of thecompetition!
Global sales offices whereexpert application techniciansand sales engineers specifi-cally apply themselves to yourspecial requirements andpersonally advise you are alsoavailable for you around theworld.Don’t hesitate in using themto your advantage!
Express itemin 24 hours ex plant:
With Knürr you arealways ahead
of the competition
6SystemAccessories
6.2 to 6.30
6.1
S Y S T E M A C C E S S O R I E S
AccessoryRange
19” ShelfProducts 6.3Handle 6.7Cable Management 6.7Shelf 6.8
19” DrawersDrawer 6.9Shelf 6.9Keyboard Drawer 6.12Chassis Rail 6.14Blanking Panel, Front Panel 6.16Document Holder 6.19Telescopic Slide 6.20
Mounting MaterialOverview 6.23Mounting Kit 6.25FP Mounting Kit 6.27Spring Nut, Caged Nut 6.28Screws 6.29
S Y S T E M A C C E S S O R I E S
6.2
A 19” shelf range for five rack and enclosure rangesmiracel, smaract, MaxLoad,doubleprorack, ConAct.
High cost effectiveness with:– Universal installation option– Rapid installation using
adjusting knobs– Future-oriented construction:
Cost-effective adjustment tonew requirements usingextension boards
– Same board size with fullpull-out, part pull-out and fixedinstallation
MEC20018
6.3
S Y S T E M A C C E S S O R I E S
19” ShelfFixed
W H D HU d W x L For rack type Order no. UP
19” 600 365 430 x 300 miracel/smaract LAN 01.102.001.1 1 unit
19” 600 440 430 x 300 miracel/smaract 19” 01.102.002.1 1 unit
19” 800 565 430 x 500 miracel/smaract LAN 01.102.003.1 1 unit
19” 800 565 430 x 500 miracel/smaract LAN 01.102.003.8 1 unit
19” 800 640 430 x 600 miracel/smaract 19” 01.102.004.1 1 unit
19” 800 640 430 x 600 miracel/smaract 19” 01.102.004.8 1 unit
19” 900 665 430 x 600 miracel/smaract LAN 01.102.004.1 1 unit
19” 900 665 430 x 600 miracel/smaract LAN 01.102.004.8 1 unit
19” 900 740 430 X 600 miracel/smaract 19” Server 01.102.005.1 1 unit
19” 900 740 430 X 600 miracel/smaract 19” Server 01.102.005.8 1 unit
19” 1000 740 430 x 600 miracel 19” Server 01.102.005.1 1 unit
19” 1000 740 430 x 600 miracel 19” Server 01.102.005.8 1 unit
600 600 530 515 x 500 miracel CW 535 01.102.200.1 1 Stk
700 600 530 615 x 500 miracel CW 635 01.102.201.1 1 unit
800 600 530 715 x 500 miracel CW 735 01.102.202.1 1 Stk
600 800 730 515 x 700 miracel CW 535 01.102.208.1 1 unit
700 800 730 615 x 700 miracel CW 635 01.102.209.1 1 unit
800 800 730 715 x 700 miracel CW 735 01.102.210.1 1 unit
600 900 830 515 x 800 miracel CW 535 01.102.212.1 1 unit
800 900 830 715 x 800 miracel CW 735 01.102.214.1 1 unit
600 600 535 515 x 500 smaract CW 535 01.102.252.1 1 unit
600 800 735 515 x 700 smaract CW 535 01.102.254.1 1 unit
600 900 835 515 x 800 smaract CW 535 01.102.255.1 1 unit
19” 900 740 430 x 600 MaxLoad 19” Server 01.102.005.1 1 unit
19” 900 740 430 x 600 MaxLoad 19” Server 01.102.005.8 1 unit
19” 1000 740 430 x 600 MaxLoad 19” Server 01.102.005.1 1 unit
19” 1000 740 430 x 600 MaxLoad 19” Server 01.102.005.8 1 unit
19” 500 335 430 x 300 doubleprorack LAN 01.102.001.1 1 unit
19” 600 435 430 x 300 doubleprorack LAN 01.102.002.1 1 unit
19” 800 635 430 x 600 doubleprorack LAN 01.102.004.1 1 unit
19” 800 635 430 x 600 doubleprorack LAN 01.102.004.8 1 unit
19” 500 460 430 x 300 doubleprorack, no door 01.102.002.1 1 unit
19” 600 560 430 x 500 doubleprorack, no door 01.102.003.1 1 unit
19” 600 560 430 x 500 doubleprorack, no door 01.102.003.8 1 unit
19” 700 660 430 x 600 doubleprorack, no door 01.102.004.1 1 unit
19” 700 660 430 x 600 doubleprorack, no door 01.102.004.8 1 unit
19” 500 285 430 x 200 ConAct 01.102.000.1 1 unit
19” 600 385 430 x 300 ConAct 01.102.001.1 1 unit
- With perforation to optimise air supply
Material / FinishSheet steel 1.0 mm, zinc-passivated,powder-coated texture
ColourFinal digit of order number .1:RAL 7035, light-greyFinal digit of order number .8:RAL 7021, dark-grey
Load rating500 N static per item
Supply schedule2 Mounting rails, incl. mounting bracket1 Shelf board 1 Extension board (from L = 600)Mounting material
How suppliedFlat packed kit
MEC00451
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
S Y S T E M A C C E S S O R I E S
6.4
19” ShelfPart pull-out
B H D HU d W x L For rack type Order no. UP
19” 600 365 430 x 300 miracel/smaract LAN 01.102.010.1 1 unit
19” 600 440 430 x 300 miracel/smaract 19” 01.102.010.1 1 unit
19” 800 565 430 x 500 miracel/smaract LAN 01.102.011.1 1 unit
19” 800 565 430 x 500 miracel/smaract LAN 01.102.011.8 1 unit
19” 800 640 430 x 500 miracel/smaract 19” 01.102.011.1 1 unit
19” 800 640 430 x 500 miracel/smaract 19” 01.102.011.8 1 unit
19” 900 665 430 x 500 miracel/smaract LAN 01.102.011.1 1 unit
19” 900 665 430 x 500 miracel/smaract LAN 01.102.011.8 1 unit
19” 900 740 430 x 600 miracel/smaract 19” Server 01.102.012.1 1 unit
19” 900 740 430 x 600 miracel/smaract 19” Server 01.102.012.8 1 unit
19” 1000 740 430 x 600 miracel 19” Server 01.102.012.1 1 unit
19” 1000 740 430 x 600 miracel 19” Server 01.102.012.8 1 unit
600 600 530 515 x 500 miracel CW 535 01.102.170.1 1 unit
700 600 530 615 x 500 miracel CW 635 01.102.171.1 1 Stk
800 600 530 715 x 500 miracel CW 735 01.102.172.1 1 unit
600 800/900 730 515 x 600 miracel CW 535 01.102.178.1 1 unit
700 800/900 730 615 x 600 miracel CW 635 01.102.179.1 1 unit
800 800/900 730 715 x 600 miracel CW 735 01.102.180.1 1 unit
19” 900 740 430 x 600 MaxLoad 19” Server 01.102.012.1 1 unit
19” 900 740 430 x 600 MaxLoad 19” Server 01.102.012.8 1 unit
19” 1000 740 430 x 600 MaxLoad 19” Server 01.102.012.1 1 unit
19” 1000 740 430 x 600 MaxLoad 19” Server 01.102.012.8 1 unit
19” 600 435 430 x 300 doubleprorack LAN 01.102.010.1 1 unit
19” 800 635 430 x 500 doubleprorack LAN 01.102.011.1 1 unit
19” 800 635 430 x 500 doubleprorack LAN 01.102.011.8 1 unit
19” 500 460 430 x 300 doubleprorack, no door 01.102.010.1 1 unit
19” 600 560 430 x 500 doubleprorack, no door 01.102.011.1 1 unit
19” 600 560 430 x 500 doubleprorack, no door 01.102.011.8 1 unit
19” 700 660 430 x 500 doubleprorack, no door 01.102.011.1 1 unit
19” 700 660 430 x 500 doubleprorack, no door 01.102.011.8 1 unit
19” 600 385 430 x 300 ConAct 01.102.010.1 1 unit
- With perforation to optimise air supply
Material / FinishSheet steel 1.0 mm, zinc-passivated,powder-coated texture
ColourFinal digit of order number .1:RAL 7035, light-greyFinal digit of order number .8:RAL 7021 dark-grey
Load rating500 N static per item
Supply schedule1 Pair of telescopic slides1 Shelf board 1 Extension board (from L = 600)Mounting material
How suppliedFlat packed kit
MEC00452
MEC20019
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
6.5
S Y S T E M A C C E S S O R I E S
19” ShelfFull pull-out
W H D HU d WxL For rack type Order no. UP
19” 600 365 430 x 300 miracel/smaract LAN 01.102.160.1 1 unit
19” 600 440 430 x 300 miracel/smaract 19” 01.102.160.1 1 unit
19” 800 565 430 x 500 miracel/smaract LAN 01.102.161.1 1 unit
19” 800 640 430 x 500 miracel/smaract 19” 01.102.161.1 1 unit
19” 900 665 430 x 500 miracel/smaract LAN 01.102.161.1 1 unit
19” 900 740 430 x 600 miracel/smaract 19” Server 01.102.162.1 1 unit
19” 1000 740 430 x 600 miracel 19” Server 01.102.162.1 1 unit
19” 900 740 430 x 600 MaxLoad 19” Server 01.102.162.1 1 unit
19” 1000 740 430 x 600 MaxLoad 19” Server 01.102.162.1 1 unit
- With perforation to optimise air supply
Material / FinishSheet steel 1.0 mm, zinc-passivated,powder-coated texture
ColourRAL 7035 light-grey
Load rating500 N static per item
Supply schedule1 Pair of telescopic slides1 Shelf board 1 Extension board (from L = 600)Mounting material
How suppliedFlat packed kit
MEC00462
MEC20020
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
S Y S T E M A C C E S S O R I E S
6.6
19” Heavy-Duty ShelfFixed
W H D HU d WxL For rack type Order no. UP
19” 800 565 467 x 460 miracel/smaract LAN 01.131.473.1 1 unit
19” 800 565 467 x 460 miracel/smaract LAN 01.131.473.8 1 unit
19” 800 640 467 x 460 miracel/smaract 19” 01.131.475.1 1 unit
19” 900 665 467 x 560 miracel/smaract LAN 01.131.476.1 1 unit
19” 900 740 467 x 560 miracel/smaract 19” Server 01.131.474.1 1 unit
19” 900 740 467 x 560 miracel/smaract 19” Server 01.131.474.8 1 unit
19” 1000 740 467 x 560 miracel 19” Server 01.131.474.1 1 unit
19” 1000 740 467 x 560 miracel 19” Server 01.131.474.8 1 unit
600 800 730 534 x 536 miracel CW 535 01.131.477.1 1 unit
800 800 730 734 x 536 miracel CW 735 01.131.479.1 1 unit
600 900 830 534 x 536 miracel CW 535 01.131.481.1 1 unit
800 900 830 734 x 536 miracel CW 735 01.131.483.1 1 unit
19” 900 740 467 x 560 MaxLoad 19” Server 01.131.474.1 1 unit
19” 900 740 467 x 560 MaxLoad 19” Server 01.131.474.8 1 unit
19” 1000 740 467 x 560 MaxLoad 19” Server 01.131.474.1 1 unit
19” 1000 740 467 x 560 MaxLoad 19” Server 01.131.474.8 1 unit
- Surface area with perforation
Material / FinishSheet steel 1.5 mm, zinc-passivated,powder-coated texture
ColourFinal digit of order number .1:RAL 7035, light-greyFinal digit of order number .8:RAL 7021 dark-grey
Load rating1000 N static for CW installation1500 N static for 19” installation
Supply schedule1 Shelf fixed, screwableMounting hardware
How suppliedFlat packed kitMEC00120
MEC20117
MEC20113
MEC20022
19” Heavy-Duty ShelfFull pull-out
- With perforation to optimise air supply- Locking in pushed-in and fully pulled-out
position- Simple mounting with patented quick
mounting system
Material / FinishSheet steel, 1.5 mm, powder-coatedtexture
ColourFinal digit of order number .1:RAL 7035, light-greyFinal digit of order number .8:RAL 7021 dark-grey
Load rating1200 N static
Supply schedule1 Pair of telescopic slides1 Shelf boardMounting material
How suppliedFlat packed kit
W H D HU d WxL For rack type Order no. UP
19” 600 365 412 x 360 miracel/smaract LAN 01.102.030.1 1 unit
19” 600 440 412 x 360 miracel/smaract 19” 01.102.030.1 1 unit
19” 800 565 412 x 560 miracel/smaract LAN 01.102.031.1 1 unit
19” 800 565 412 x 560 miracel/smaract LAN 01.102.031.8 1 unit
19” 800 640 412 x 560 miracel/smaract 19” 01.102.031.1 1 unit
19” 800 640 412 x 560 miracel/smaract 19” 01.102.031.8 1 unit
19” 900 665 412 x 660 miracel/smaract LAN 01.102.032.1 1 unit
19” 900 665 412 x 660 miracel/smaract LAN 01.102.032.8 1 unit
19” 900 740 412 x 660 miracel/smaract 19” Server 01.102.032.1 1 unit
19” 900 740 412 x 660 miracel/smaract 19” Server 01.102.032.8 1 unit
19” 1000 740 412 x 660 miracel 19” Server 01.102.032.1 1 unit
19” 1000 740 412 x 660 miracel 19” Server 01.102.032.8 1 unit
Continued on next page
6.7
S Y S T E M A C C E S S O R I E S
Handle
W H D HU d W x L For rack type Order no. UP
00.050.503.1 1 set
- Suitable for shelves and heavy-duty shelves- With internal thread, M5
MaterialDie-cast aluminium consolesHandle extrusions of extruded aluminiumCaps of ABS UL 94 HB
FinishHandle, powder-coated, grey-blue,RAL 5008 / Cap, light-grey, RAL 7035
Supply schedule2 Handles
MEC20138
MEC20111
Cable Cantilever Girder
W H D HU d W x L For rack type Order no. UP
05.040.095.0 1 unit
- Swing-out from the rear, therefore freeaccess to the rear side
- For simple mounting in rack/on the shelf;quick connecting to and disconnecting fromshelf or rack with a spring clip
- Guarantees defined and kink-free cablemanagement
- Minimum space requirement behind thepushed-in shelves, 40 mm
Material / FinishSheet steel, 1.5 mm, zinc-passivated
Supply schedule1 Cable cantilever girder5 Velcro stripsMounting material
How suppliedFlat packed kit
MEC00125 MEC00126 MEC00127
MEC20115
MEC20094
W H D HU d WxL For rack type Order no. UP
600 800 730 478 x 560 miracel LW 535 01.102.034.1 1 unit
800 800 730 678 x 560 miracel LW 735 01.102.037.1 1 unit
600 900 830 478 x 660 miracel LW 535 01.102.035.1 1 unit
800 900 830 678 x 660 miracel LW 735 01.102.038.1 1 unit
600 800 735 478 x 560 smaract LW 535 01.102.034.1 1 unit
600 900 835 478 x 660 smaract LW 535 01.102.035.1 1 unit
19” 900 740 412 x 660 MaxLoad 19” Server 01.102.032.1 1 unit
19” 900 740 412 x 660 MaxLoad 19” Server 01.102.032.8 1 unit
19” 1000 740 412 x 660 MaxLoad 19” Server 01.102.032.1 1 unit
19” 1000 740 412 x 660 MaxLoad 19” Server 01.102.032.8 1 unit
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
S Y S T E M A C C E S S O R I E S
6.8
19” Shelf, 2 HU/UFixed
W H D W x L For rack type Order no. UP
19” 88.1 600/800/900/1000 432 x 280 miracel/smaract 01.113.736.1 1 unit
19” 88.1 600/800/900/1000 432 x 380 miracel/smaract 01.113.737.1 1 unit
19” 88.1 900/1000 432 x 280 MaxLoad 01.113.736.1 1 unit
19” 88.1 900/1000 432 x 380 MaxLoad 01.113.737.1 1 unit
19” 88.1 500/600/800 432 x 280 doubleprorack 01.113.736.1 1 unit
19” 88.1 500/600/800 432 x 380 doubleprorack 01.113.737.1 1 unit
19” 88.1 400/500/600 432 x 280 ConAct 01.113.736.1 1 unit
19” 88.1 500/600 432 x 380 ConAct 01.113.737.1 1 unit
- For installation in racks with fixed19” installation on the front
- Simple and quick mounting on 19” extrusions
- Also for swing frame in the 19” rack and19” enclosure
Finish/ColourPowder-coated texture, RAL 7035,light-grey
MaterialSheet steel, 1.5 mm
Load rating200 N static
Supply schedule1 Shelf, fixedMounting material
How suppliedFlat packed kitMIR00373
MIR00375
19” Shelf, 2 HU/UAdjustable
W H D W x L For rack type Order no. UP
19” 88.1 600/800/900/1000 432 x 280 miracel/smaract 01.113.409.1 1 unit
19” 88.1 600/800/900/1000 432 x 380 miracel/smaract 01.113.410.1 1 unit
19” 88.1 600/800/900 432 x 480 miracel/smaract 01.113.411.1 1 unit
19” 88.1 900/1000 432 x 280 MaxLoad 01.113.409.1 1 unit
19” 88.1 900/1000 432 x 380 MaxLoad 01.113.410.1 1 unit
19” 88.1 900/1000 432 x 480 MaxLoad 01.113.411.1 1 unit
19” 88.1 500/600/800 432 x 280 doubleprorack 01.113.409.1 1 unit
19” 88.1 500/600/800 432 x 380 doubleprorack 01.113.410.1 1 unit
19” 88.1 600/800 432 x 480 doubleprorack 01.113.411.1 1 unit
19” 88.1 400/500/600 432 x 280 ConAct 01.113.409.1 1 unit
19” 88.1 500/600 432 x 380 ConAct 01.113.410.1 1 unit
19” 88.1 600 432 x 480 ConAct 01.113.411.1 1 unit
- For installation in racks with adjustable19” installation on the front
- Simple and quick mounting on19” extrusions
- Also for swing frame in the 19” rack and19” enclosure
- Adjustable in increments of 25 mm in thedepth
Material / FinishSheet steel 1.5 mm, powder-coatedtexture
ColourRAL 7035 light-grey
Load rating200 N static
How suppliedFlat packed kit
MIR00102
MIR00103
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
6.9
S Y S T E M A C C E S S O R I E S
19” Shelf, 1 HUPull-out
W H D HU d W x L For rack type Order no. UP
19” 43.6 600 1 365 403 x 400 miracel/smaract LAN 02.045.149.1 1 unit
19” 43.6 600 1 440 403 x 400 miracel/smaract 19” 02.045.149.1 1 unit
19” 43.6 800 1 565 403 x 600 miracel/smaract LAN 02.045.147.1 1 unit
19” 43.6 800 1 640 403 x 600 miracel/smaract 19” 02.045.147.1 1 unit
19” 43.6 900 1 665 403 x 600 miracel/smaract LAN 02.045.147.1 1 unit
19” 43.6 900 1 740 403 x 600 miracel/smaract 19” Server 02.045.147.1 1 unit
19” 43.6 1000 1 740 403 x 600 miracel 19” Server 02.045.147.1 1 unit
19” 43.6 900 1 740 403 x 600 MaxLoad 19” Server 02.045.147.1 1 unit
19” 43.6 1000 1 740 403 x 600 MaxLoad 19” Server 02.045.147.1 1 unit
19” 43.6 600 1 435 403 x 400 doubleprorack LAN 02.045.149.1 1 unit
19” 43.6 800 1 635 403 x 600 doubleprorack LAN 02.045.147.1 1 unit
- With handle- Can also be used as writing board
Material / FinishShelf, sheet steel, 1.0 mmTelescopic slide, cold rolled steel
Finish/ColourPowder-coated textureRAL 7035 light-grey
Load rating200 N static
Supply schedule1 Shelf1 Pair of telescopic slidesMounting material
How suppliedPreassembled
MEC00118
MEC20118
19” DrawerInstallation on the front
W H D HU For rack type Order no. UP
19” 43.6 600-1000 1 miracel/smaract/MaxLoad/doubleprorack/ConAct 01.113.926.1 1 unit
19” 88.1 600-1000 2 miracel/smaract/MaxLoad/doubleprorack/ConAct 01.113.927.1 1 unit
19” 88.1 600-1000 2 miracel/smaract/MaxLoad/doubleprorack/ConAct 01.113.927.8 1 unit
19” 132.5 600-1000 3 miracel/smaract/MaxLoad/doubleprorack/ConAct 01.113.928.1 1 unit
- For installation on the front 19” extrusions
- For storing service documents- Simple and quick mounting
Material / FinishDrawer, sheet steel 1.0 mm,powder-coated textureTelescopic slides, sendzimir zinc-coated
ColourFinal digit of order number .1:RAL 7035, light-greyFinal digit of order number .8:RAL 7021, dark-grey
Load rating150 N static
Supply schedule1 19” Drawer with lock, including key1 Pair of telescopic slidesMounting material
How suppliedPreassembled
SCH00058
SCH00054
W H D HU d L For rack type Order no. UP
19” 43.6 600 1 365 400 miracel/smaract LAN 02.045.151.1 1 unit
19” 43.6 600 1 440 400 miracel/smaract 19” 02.045.151.1 1 unit
19” 87.1 600 2 440 400 miracel/smaract 19” 02.045.152.1 1 unit
19” 131.5 600 3 440 400 miracel/smaract 19” 02.045.153.1 1 unit
19” 176.0 600 4 440 400 miracel/smaract 19” 02.045.154.1 1 unit
19” 43.6 800 1 565 400 miracel/smaract LAN 02.045.151.1 1 unit
19” 87.1 800 2 565 400 miracel/smaract LAN 02.045.152.1 1 unit
19” 131.5 800 3 565 400 miracel/smaract LAN 02.045.153.1 1 unit
19” 176.0 800 4 565 400 miracel/smaract LAN 02.045.154.1 1 unit
19” 43.6 800 1 640 600 miracel/smaract 19” 02.045.161.1 1 unit
19” 43.6 900 1 665 600 miracel/smaract LAN 02.045.161.1 1 unit
19” 87.1 900 2 665 600 miracel/smaract LAN 02.045.162.1 1 unit
19” 131.5 900 3 665 600 miracel/smaract LAN 02.045.163.1 1 unit
19” 176.0 900 4 665 600 miracel/smaract LAN 02.045.164.1 1 unit
19” 43.6 900 1 740 600 miracel/smaract 19” Server 02.045.161.1 1 unit
19” 87.1 900 2 740 600 miracel/smaract 19” Server 02.045.162.1 1 unit
19” 131.5 900 3 740 600 miracel/smaract 19” Server 02.045.163.1 1 unit
19” 176.0 900 4 740 600 miracel/smaract 19” Server 02.045.164.1 1 unit
19” 43.6 1000 1 740 600 miracel/smaract 19” Server 02.045.161.1 1 unit
19” 87.1 1000 2 740 600 miracel/smaract 19” Server 02.045.162.1 1 unit
19” 131.5 1000 3 740 600 miracel/smaract 19” Server 02.045.163.1 1 unit
19” 176.0 1000 4 740 600 miracel/smaract 19” Server 02.045.164.1 1 unit
19” 43.6 900 1 740 600 MaxLoad 19” Server 02.045.161.1 1 unit
19” 87.1 900 2 740 600 MaxLoad 19” Server 02.045.162.1 1 unit
19” 131.5 900 3 740 600 MaxLoad 19” Server 02.045.163.1 1 unit
19” 176.0 900 4 740 600 MaxLoad 19” Server 02.045.164.1 1 unit
19” 43.6 1000 1 740 600 MaxLoad 19” Server 02.045.161.1 1 unit
19” 87.1 1000 2 740 600 MaxLoad 19” Server 02.045.162.1 1 unit
19” 131.5 1000 3 740 600 MaxLoad 19” Server 02.045.163.1 1 unit
19” 176.0 1000 4 740 600 MaxLoad 19” Server 02.045.164.1 1 unit
19” 43.6 600 1 435 400 doubleprorack LAN 02.045.151.1 1 unit
19” 87.1 600 2 435 400 doubleprorack LAN 02.045.152.1 1 unit
19” 131.5 600 3 435 400 doubleprorack LAN 02.045.153.1 1 unit
19” 176.0 600 4 435 400 doubleprorack LAN 02.045.154.1 1 unit
S Y S T E M A C C E S S O R I E S
6.10
19” Drawer with LockMounting on 19” installation, front and rear
- For mounting in racks with fixed 19” installation on the front and rear
- Full pull-out
Material / FinishDrawer, sheet steel 1.0 mm,
powder-coated textureTelescopic slides, cold rolled steel,
sendzimir zinc-coated
ColourDrawer, RAL7035, light-grey
Load rating1 HU -200 N static2 HU - 400 N static3 HU - 400 N static4 HU - 400 N static
Supply schedule1 19” Drawer with lock, including
key1 Pair of telescopic slidesMounting hardware
How suppliedPreassembled
SCH00053
SCH00057
Continued on next page
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depth WxL = Surface areaL = LengthCW = Clear width = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
6.11
S Y S T E M A C C E S S O R I E S
B H T HE/U t L für Schranktyp Bestell-Nr. VE
19” 43.6 800 1 635 600 doubleprorack LAN 02.045.161.1 1 unit
19” 87.1 800 2 635 600 doubleprorack LAN 02.045.162.1 1 unit
19” 131.5 800 3 635 600 doubleprorack LAN 02.045.163.1 1 unit
19” 176.0 800 4 635 600 doubleprorack LAN 02.045.164.1 1 unit
19” 43.6 500 1 460 400 doubleprorack 19”, no door 02.045.151.1 1 unit
19” 87.1 500 2 460 400 doubleprorack 19”, no door 02.045.152.1 1 unit
19” 131.5 500 3 460 400 doubleprorack 19”, no door 02.045.153.1 1 unit
19” 176.0 500 4 460 400 doubleprorack 19”, no door 02.045.154.1 1 unit
19” 43.6 600 1 560 400 doubleprorack 19”, no door 02.045.151.1 1 unit
19” 87.1 600 2 560 400 doubleprorack 19”, no door 02.045.152.1 1 unit
19” 131.5 600 3 560 400 doubleprorack 19”, no door 02.045.153.1 1 unit
19” 176.0 600 4 560 400 doubleprorack 19”, no door 02.045.154.1 1 unit
19” 43.6 700 1 660 600 doubleprorack 19”, no door 02.045.161.1 1 unit
19” 87.1 700 2 660 600 doubleprorack 19”, no door 02.045.162.1 1 unit
19” 131.5 700 3 660 600 doubleprorack 19”, no door 02.045.163.1 1 unit
19” 176.0 700 4 660 600 doubleprorack 19”, no door 02.045.164.1 1 unit
Writing BoardFor 19” drawer with lock
W H D HU d L For rack type Order no. UP
400 02.045.202.9 1 unit
600 02.045.203.9 1 unit
- For drawer depth 400 mm and 600 mm
Material / FinishSheet steel, 1.0 mm, powder-coatedtexture
ColourRAL 7035, light-grey
Supply schedule1 Writing boardMounting material
How suppliedFlat packed kit
SCH00062
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depth WxL = Surface areaL = LengthCW = Clear width = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
S Y S T E M A C C E S S O R I E S
6.12
19” Keyboard Drawer, 1 HU/UFor 19” keyboard
W H D HU d L For rack type Order no. UP
19” 43.6 600 1 440 miracel/smaract 19” 02.011.101.1 1 unit
19” 43.6 800 1 565 miracel/smaract LAN 02.011.101.1 1 unit
19” 43.6 800 1 640 miracel/smaract 19” 02.011.101.1 1 unit
19” 43.6 900 1 665 miracel/smaract LAN 02.011.101.1 1 unit
19” 43.6 900 1 740 miracel/smaract 19” Server 02.011.101.1 1 unit
19” 43.6 1000 1 740 miracel 19” Server 02.011.101.1 1 unit
19” 47.6 900 1 740 MaxLoad 19” Server 02.011.101.1 1 unit
19” 47.6 1000 1 740 MaxLoad 19” Server 02.011.101.1 1 unit
19” 43.6 600 1 435 doubleprorack LAN 02.011.101.1 1 unit
19” 43.6 800 1 635 doubleprorack LAN 02.011.101.1 1 unit
- With hand support- With cable strain relief
MaterialMain unit, sheet steel, 1.0 mmFront panel, sheet steel, 1.0 mm
Finish/ColourPowder-coated texture, RAL 7035,light-grey
Supply schedule1 19” keyboard drawer, 1 HU1 Pair of telescopic slidesVelcro strip for keyboard mountingMounting material
How suppliedPreassembled
SCH00059
SCH00055
19” Keyboard Drawer, 1 HU/UWithout extension for PC mouse
W H D HU d L For rack type Order no. UP
19” 43.6 800/900 1 miracel/smaract/MaxLoad 01.136.378.1 1 unit
- With hand support
Material / FinishSheet steel, 1.25 mmHand support, sponge rubber
DimensionsUseable storage surface: dimensions without hand support W 372 mm x D 209 mm x H 32 mm
Finish / ColourPowder-coated texture, RAL 7035,light-grey
Supply schedule1 Keyboard drawer1 Pair of telescopic slides1 Hand supportMounting material
How suppliedFlat packed kit
NoteKeyboard not included in supply scheduleNot for rack depth D 600
MEC00109
19” Compact KeyboardIBM-compatible keyboard with trackball
W H S HU A1 A2 Pmax Model Order no. UP
German 06.002.048.3 1 unit
VHP00155
- Suitable for keyboard drawer 01.136.378.1- Flat keyboard with 84 keys and
integrated trackball
Electrical data- Power supply
+5 V/DC max. 18 mA- Mains cable (1.6 m) with tapping for two
6-pin mini DIN plugs (PS/2)- For Windows 98/ME/NT/2000/XP
DimensionsLength x width x height370 x 138.5 x 20 mm
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
6.13
S Y S T E M A C C E S S O R I E S
19” Keyboard Drawer, 1 HU/UWith extension for PC mouse
W H D HU d L For rack type Order no. UP
19” 43.6 800/900 1 miracel/smaract/MaxLoad 01.136.379.1 1 unit
- With hand support- Mouse surface optionally right/left
pull-out- Storage drawer for PC mouse
DimensionsUseable storage surface: dimensions without hand support W 372 mm x D 209 mm x H 32 mm
Finish / ColourPowder-coated texture, RAL 7035,light-grey
Supply schedule1 Keyboard drawer1 Pair of telescopic slides1 Hand supportMounting material
How suppliedFlat packed kit
NoteKeyboard not included in supply scheduleNot for rack depth D 600
MEC00116
19” Keyboard Drawer, 1 HU/UFor touchpad keyboard
W H D HU d L For rack type Order no. UP
19” 43.6 800/900 1 miracel/smaract/MaxLoad 01.136.380.1 1 unit
- With hand support
DimensionsUseable storage surface: dimensionswithout hand support,W 418 mm x D 263 mm x H 32 mm
Finish / ColourPowder-coated texture, RAL 7035,light-grey
Supply schedule1 Keyboard drawer1 Pair of telescopic slides1 Hand supportMounting material
How suppliedFlat packed kit
NoteKeyboard not included in supply scheduleNot for rack depth D 600
MEC00107
Compact Keyboard
W H S HU A1 A2 Pmax Model Order no. UP
German 06.002.165.3 1 unit
- Suitable for keyboard drawer 01.136.379.1- Flat compact keyboard with 86 keys for AT
and PS/2 systems- Low space requirement and low weight- Ideal for portable and 19” systems- High reliability with “gold crosspoint
contacts”- For Windows 98/ME/NT/2000/XP
Electrical data- Power supply
+3.3-5 V/DC max. 10 mA
- Mains cable (1.7 m),mini DIN plug (PS/2)
DimensionsLength x width x height281.5 x 131.5 x 24 mmVHP00157
19” Compact KeyboardFlat, IBM-compatible keyboard with integrated touchpad
W H S HU A1 A2 Pmax Model Order no. UP
German 06.002.177.3 1 unit
VHP00203
- Suitable for keyboard drawer 01.136.380.1- Model with 105 keys- Integrated mouse function
Electrical data- Power supply
+5 V/DC max. 18 mA- Connection cable: (1.8 m)
round cable with tapping for two 6-pin mini DIN plugs (PS/2)
- For Windows 98/ME/NT/2000/XP
DimensionsLength x width x height415 x 193 x 35.5 mm
S Y S T E M A C C E S S O R I E S
6.14
Chassis RailScrew-on
W H D HU d L For rack type Order no. UP
600 365 311 miracel/smaract LAN 01.110.657.0 1 unit
600 440 386 miracel/smaract 19” 01.110.726.0 1 unit
800 565 511 miracel/smaract LAN 01.110.658.0 1 unit
800 640 586 miracel/smaract 19” 01.110.727.0 1 unit
900 665 611 miracel/smaract LAN 01.110.659.0 1 unit
900 740 686 miracel/smaract 19” Server 01.110.728.0 1 unit
1000 740 686 miracel 19” Server 01.110.728.0 1 unit
900 740 686 MaxLoad 19” Server 01.110.728.0 1 unit
1000 740 686 MaxLoad 19” Server 01.110.728.0 1 unit
600 435 386 doubleprorack LAN 01.110.726.0 1 unit
500 285 232 conact 05.010.346.9 1 pair
600 285 332 conact 05.010.347.9 1 pair
- For installation in 19” rack and enclosure- For heavy components
MaterialExtruded aluminium, 2.0 mm
FinishPolished
Supply schedule1 Chassis rail
Load rating500 N static per item
NoteWhen selecting the chassis rail, pleasenote the chassis depth d of the rack or enclosure
When mounting on the T-slot, pleasealso order M5 spring nut: 05.041.503.9 (set of 50 units).
MEC20131
TEM00066
MEC20112
Chassis RailFor swing frame
W H D HU d L Model Order no. UP
600/800 125 miracel 01.110.795.0 1 unit
- Mounting on the front vertical extrusions
MaterialExtruded aluminium, 2.0 mm
FinishPolished
Load rating200 N static per item
Supply schedule1 Chassis rail
NoteWhen selecting the chassis rail, pleasenote the chassis depth d of the rack or enclosure
TEM00068
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
MEC20114
6.15
S Y S T E M A C C E S S O R I E S
Universal Chassis RailScrew-on
- For installation in 19” rack and enclosure
FinishZinc-passivated, yellow chrome-plated
MaterialSheet steel, 1.25 mm, zinc-passivated
Load rating120 N static per item
Supply schedule2 Chassis railsMounting material
How suppliedFlat packed kit
NoteWhen selecting the chassis rail, pleasenote the chassis depth d of the rack or enclosure
W H D HU d L For rack type Order no. UP
600 365 312 miracel/smaract LAN 02.310.258.9 1 pair
600 440 412 miracel/smaract 19” 02.310.259.9 1 pair
800 565 512 miracel/smaract LAN 02.310.260.9 1 pair
800 640 612 miracel/smaract 19” 02.310.261.9 1 pair
900 665 612 miracel/smaract LAN 02.310.261.9 1 pair
900 740 712 miracel/smaract 19” Server 02.310.262.9 1 pair
500 460 412 doubleprorack 19”, no door 02.310.259.9 1 pair
600 435 412 doubleprorack LAN 02.310.259.9 1 pair
600 560 512 doubleprorack 19”, no door 02.310.260.9 1 pair
800 635 512 doubleprorack LAN 02.310.260.9 1 pair
800 660 612 doubleprorack 19”, no door 02.310.261.9 1 pair
TEL00157
MIR00386
Chassis RailHang-on
- Quick and simple mounting- Only for installation in miracel racks
MaterialSheet steel, 2.0 mm
FinishZinc-passivated, yellow chrome-plated
Load rating200 N static per item
Supply schedule1 Chassis rail
NoteWhen selecting the chassis rail, pleasenote the chassis depth d of the rack or enclosure
W H D HU d L For rack type Order no. UP
600 365 336 miracel LAN 01.131.223.7 1 unit
800 565 536 miracel LAN 01.131.224.7 1 unit
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depth WxL = Surface areaL = LengthCW = Clear width = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
S Y S T E M A C C E S S O R I E S
6.16
19” Blanking Panel
W H D HU Model Order no. UP
482.6 43.6 1 powder-coated 01.117.026.1 1 unit
482.6 43.6 1 powder-coated 01.117.026.8 1 unit
482.6 88.1 2 powder-coated 01.117.028.1 1 unit
482.6 88.1 2 powder-coated 01.117.028.8 1 unit
482.6 132.5 3 powder-coated 01.117.029.1 1 unit
482.6 132.5 3 powder-coated 01.117.029.8 1 unit
482.6 265.9 6 powder-coated 01.117.030.1 1 unit
482.6 265.9 6 powder-coated 01.117.030.8 1 unit
482.6 399.2 9 powder-coated 01.117.031.1 1 unit
482.6 399.2 9 powder-coated 01.117.031.8 1 unit
- For covering free front areas
MaterialSheet steel, 1.5 mm
FinishFinal digit of order number .1:Powder-coated texture, RAL 7035,light-greyFinal digit of order number .8:Powder-coated texture, RAL 7021,dark-grey
Supply schedule1 19” blanking panel
How suppliedIn units
NotePlease also order front panel mountingmaterial.
CUD00005
CUD00004
FRO00005
MEC20109
Material / FinishFinal digit of order number .0:AlMg3 - F23 polished with lamination sheetFinal digit of order number .1:AlMg3 - F23, powder-coated RAL 7035Final digit of order number .6: AlMg3 -F23 EB (anodising-capable), anodisedE6/EV1
Supply schedule1 19” Front panel
How suppliedIn units
NotePlease also order front panel mountingmaterial.
19” Front PanelAluminium 4 mm
H X Y HU Model Order no. UP
46.6 31.7 1 polished 02.008.051.0 1 unit
88.1 76.2 2 polished 02.008.052.0 1 unit
132.5 57.1 3 polished 02.008.053.0 1 unit
177.0 101.6 4 polished 02.008.054.0 1 unit
221.4 146.0 5 polished 02.008.055.0 1 unit
265.9 76.2 190.4 6 polished 02.008.056.0 1 unit
46.6 31.7 1 powder-coated 02.008.051.1 1 unit
88.1 76.2 2 powder-coated 02.008.052.1 1 unit
132.5 57.1 3 powder-coated 02.008.053.1 1 unit
177.0 101.6 4 powder-coated 02.008.054.1 1 unit
221.4 146.0 5 powder-coated 02.008.055.1 1 unit
265.9 76.2 190.4 6 powder-coated 02.008.056.1 1 unit
46.6 31.7 1 anodised 02.008.001.6 1 unit
88.1 76.2 2 anodised 02.008.002.6 1 unit
132.5 57.1 3 anodised 02.008.003.6 1 unit
177.0 101.6 4 anodised 02.008.004.6 1 unit
221.4 146.0 5 anodised 02.008.005.6 1 unit
265.9 76.2 190.4 6 anodised 02.008.006.6 1 unitDimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
6.17
S Y S T E M A C C E S S O R I E S
19” Front PanelAluminium 3 mm
MEC20109
H X Y HU Model Order no. UP
46.6 31.7 1 polished 02.008.021.0 1 unit
88.1 76.2 2 polished 02.008.022.0 1 unit
132.5 57.1 3 polished 02.008.023.0 1 unit
177.0 101.6 4 polished 02.008.024.0 1 unit
221.4 146.0 5 polished 02.008.025.0 1 unit
265.9 76.2 190.4 6 polished 02.008.026.0 1 unit
310.3 57.1 234.9 7 polished 02.008.027.0 1 unit
354.8 76.2 279.4 8 polished 02.008.028.0 1 unit
399.2 120.6 323.8 9 polished 02.008.029.0 1 unit
443.7 165.1 368.3 10 polished 02.008.030.0 1 unit
488.1 146.1 412.7 11 polished 02.008.031.0 1 unit
532.6 190.5 457.1 12 polished 02.008.032.0 1 unit
46.6 31.7 1 powder-coated 02.008.021.1 1 unit
88.1 76.2 2 powder-coated 02.008.022.1 1 unit
132.5 57.1 3 powder-coated 02.008.023.1 1 unit
177.0 101.6 4 powder-coated 02.008.024.1 1 unit
221.4 146.0 5 powder-coated 02.008.025.1 1 unit
265.9 76.2 190.4 6 powder-coated 02.008.026.1 1 unit
46.6 31.7 1 anodised 02.008.071.6 1 unit
88.1 76.2 2 anodised 02.008.072.6 1 unit
132.5 57.1 3 anodised 02.008.073.6 1 unit
177.0 101.6 4 anodised 02.008.074.6 1 unit
221.4 146.0 5 anodised 02.008.075.6 1 unit
265.9 76.2 190.4 6 anodised 02.008.076.6 1 unit
310.3 57.1 234.9 7 anodised 02.008.077.6 1 unit
354.8 76.2 279.4 8 anodised 02.008.078.6 1 unit
399.2 120.6 323.8 9 anodised 02.008.079.6 1 unit
443.8 165.1 368.3 10 anodised 02.008.080.6 1 unit
488.1 146.1 412.7 11 anodised 02.008.081.6 1 unit
532.6 190.5 457.1 12 anodised 02.008.082.6 1 unit
FR000005
Material / FinishFinal digit of order number .0:AlMg3 - F23 polished with lamination sheetFinal digit of order number .1:AlMg3 - F23, powder-coated RAL 7035Final digit of order number .6: AlMg3 -F23 EB (anodising-capable), anodisedE6/EV1
Supply schedule1 19” Front panel
How suppliedIn units
NotePlease also order front panel mountingmaterial.
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depth WxL = Surface areaL = LengthCW = Clear width = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
FR000006
S Y S T E M A C C E S S O R I E S
6.18
19” Ventilation Front Panel
- For additional ventilation of 19” racks and 19” pedestals in accordance with IEC 297
MaterialAluminium
Finish- Final digit of order number .1:
powder-coated, light-greyRAL 7035
- Final digit of order number .6:colourless, anodised E6 / EV 1
Supply schedule1 Ventilation front panel
How suppliedIn units
NotePlease also order front panel mountingmaterial.
MEC20110
H X Y HU Model Order no. UP
43.6 31.7 1 anodised 02.008.101.6 1 unit
88.1 76.2 2 anodised 02.008.102.6 1 unit
132.5 57.1 3 anodised 02.008.103.6 1 unit
177.0 101.6 4 anodised 02.008.104.6 1 unit
221.4 146.0 5 anodised 02.008.105.6 1 unit
265.9 76.2 190.4 6 anodised 02.008.106.6 1 unit
W H D HU Model Order no. UP
3 anodised 01.110.780.6 1 unit
6 anodised 01.110.781.6 1 unit
LUF00217
19” Front PanelPivots
- With 19” adapter and hinge
MaterialAluminium 4 mm
FinishAnodised
Supply schedule1 Front panel, hinged1 19” adapter1 Hinge
How suppliedFlat packed kit
NotePlease also order front panel mountingmaterial.
FRO00007
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depth WxL = Surface areaL = LengthCW = Clear width = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
6.19
S Y S T E M A C C E S S O R I E S
19” Front Ventilation Panel
- For additional ventilation of 19” racks and 19” pedestals in accordance with IEC 297
Material / Finish- Final digit of order number .1:ABS (UL 94 V0), light-grey RAL 7035- Final digit of order number .9:ABS (UL 94 V0), dark-grey RAL 9011
Supply schedule1 Front ventilation panel2 Connection holders
How suppliedFlat packed kit
NotePlease also order front panel mountingmaterial.
LUF00093
LUF00218
MEC20027
Document Holder
W L D Order no. UP
264 236 30 05.016.045.0 1 unit
- Self-adhesive, use 6 mm bore holes withhigher stresses
- For DIN A4 documents
MaterialHigh-impact PS
ColourGrey
Supply schedule1 Document holder
W H D HU Model Order no. UP
483 43.6 1 02.008.111.1 1 unit
483 43.6 1 02.008.111.9 1 unit
Trim FilterFor 19” front ventilation panel
- For use in conjunction with the 19” frontventilation panel
Material / FinishFilter fibres and screen cloth
Supply schedule1 Panel filterMounting material
How suppliedFlat packed kit
W H D HU Model Order no. UP
1 02.008.131.9 1 unit
MEC20144
MEC20149
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depth WxL = Surface areaL = LengthCW = Clear width = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
S Y S T E M A C C E S S O R I E S
6.20
Ball Bearing Telescopic Slide, BP-400-LRPart pull-out
TEL00173
- 3/4 pull-out, two-part- Locking in pulled-out position (friction lock)- Quick mechanism for removing and connec-
ting chassis without tools
MaterialCold rolled steel
FinishSendizimir zinc-passivated
Supply schedule1 Pair of telescopic slides
How suppliedFlat-packed kit
NotePlease also order assembly kit, order number 05.043.595.9
TEL20003
D d mL(N)A W C D E F G H I K For rack type Order no. 1 Order no. 2 UP
600 365 500 330 220.5 328 279.4 152.4 101.6 63.5 111.1 miracel/smaract LAN 05.043.613.7 1 pair
600 440 400 406 296.5 404 355.6 228.6 101.6 139.7 111.1 miracel/smaract 19” 05.043.616.7 1 pair
800 565 410 533 407 531 482.6 241.3 101.6 139.7 127 111.1 miracel/smaract LAN 05.043.621.7 1 pair
800 640 540 610 437.7 608 558.8 457.2 279.4 101.6 177.8 165.1 111.1 miracel/smaract 19” 05.043.624.7 1 pair
900 665 500 660 488.5 658 609.6 508 304.8 101.6 203.2 190.5 111.1 miracel/smaract LAN 05.043.626.7 1 pair
900 740 600 711 500 709 660.4 558.8 330.2 101.6 228.6 215.6 111.1 miracel/smaract 19” Server 05.043.628.7 1 pair
500 460 400 406 296.5 404 355.6 228.6 101.6 139.7 111.1 doubleprorack 19”. no door 05.043.616.7 1 pair
600 435 460 356 245.5 354 304.8 177.8 101.6 88.9 111.1 doubleprorack LAN 05.043.614.7 1 pair
600 485 400 406 296.5 404 355.6 228.6 101.6 139.7 111.1 doubleprorack IP54 05.043.616.7 1 pair
600 560 440 508 381.5 505 457.2 228.6 101.6 127 114.3 111.1 doubleprorack 19”. no door 05.043.620.7 1 pair
700 660 540 610 437.7 608 558.8 457.2 279.4 101.6 177.8 165.1 111.1 doubleprorack 19”. no door 05.043.624.7 1 pair
800 635 600 559 386.8 557 508 406.4 254 101.6 152.4 139.7 111.1 doubleprorackLAN 05.043.622.7 1 pair
800 685 540 610 437.7 608 558.8 457.2 279.4 101.6 177.8 165.1 111.1 doubleprorack IP54 05.043.624.7 1 pair
mL(N) = Load rating/pairA = Installation lengthB = Pull-out lengthOrder number 1 = Installation position 1Order number 2 = Installation position 2
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depth WxL = Surface areaL = LengthCW = Clear width = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
6.21
S Y S T E M A C C E S S O R I E S
Stop Spring for Ball Bearing Telescopic Slide
- Simple and quick conversion from form lockto friction lock and vice versa
- Conversion also possible at any later stage
MaterialSpring steel
Supply scheduleSet with 10 units
Ball Bearing Telescopic Slide, BF-480-FLRFull pull-out
TEL20011
TEL00173
- Full pull-out, three-part- Locking in pulled-out position (form lock)- Quick separation mechanism for removing
and disconnecting chassis without tools
MaterialCold rolled steel
FinishSendizimir zinc-passivated
Load rating400-530 N static per slide pair dependingon length
Supply schedule1 Pair of telescopic slides
How suppliedFlat-packed kit
NotePlease also order assembly kit, order number 05.043.595.9
D d mL(N)A B C D E F G H I K For rack type Order no. 1 Order no. 2 UP
600 365 455 356 381 354 323.9 311.2 298.5 200 0 miracel/smaract LAN 05.043.854.7 1 pair
600 440 490 406 432.5 404 374.7 362 349.3 139.7 111.1 miracel/smaract 19” 05.043.856.7 1 pair
800 565 510 559 584.5 557 527.1 514.4 501.7 415.9 263.5 292.1 111.1 miracel/smaract LAN 05.043.862.7 1 pair
800 640 515 610 635.5 608 277.9 565.2 552.5 466.7 288.9 342.9 111.1 miracel/smaract 19” 05.043.864.7 1 pair
900 665 520 660 686.5 658 628.7 616 603.3 517.5 314.3 393.7 111.1 miracel/smaract LAN 05.043.866.7 1 pair
900 740 520 711 737.5 709 679.5 666.8 654.1 568.3 339.7 444.5 111.1 miracel/smaract 19” Server 05.043.868.7 1 pair
500 460 490 406 432.5 404 374.7 362 349.3 139.7 111.1 doubleprorack 19”. no door 05.043.856.7 1 pair
600 435 455 356 381 354 323.9 311.2 298.5 200 0 doubleprorack LAN 05.043.854.7 1 pair
600 485 490 406 432.5 404 374.7 362 349.3 139.7 111.1 doubleprorack IP54 05.043.856.7 1 pair
600 560 510 508 530.5 506 476.3 463.6 450.9 365.1 238.1 241.3 111.1 doubleprorack 19”. no door 05.043.860.7 1 pair
700 660 515 610 635.5 608 277.9 565.2 552.5 466.7 288.9 342.9 111.1 doubleprorack 19”. no door 05.043.864.7 1 pair
800 635 510 559 584.5 557 527.1 514.4 501.7 415.9 263.5 292.1 111.1 doubleprorack LAN 05.043.862.7 1 pair
800 685 515 610 635.5 608 277.9 565.2 552.5 466.7 288.9 342.9 111.1 doubleprorack IP 05.043.864.7 1 pair
W H D HU Model Order no. UP
Form lock 05.043.666.9 10 units
Friction lock 05.043.667.9 10 units
TEL20010
Assembly Kit for Ball Bearing Slides
- For simple and quick assembly of telescopic slides, BP-400-LR and BF-480-FLR
MaterialZincorium plate, 1.5 mm
Supply schedule4 Mounting bracketsMounting material
How suppliedFlat packed kit
W H D HU Model Order no. UP
Form lock 05.043.595.9 1 setTEL00012
S Y S T E M A C C E S S O R I E S
6.22
- For use with special environmentalconditions (dust, cold, heat)
- Full pull-out, three-part- Locking in full pull-out position- Quick separation mechanism for removing
and disconnecting chassis without tools- 350 – 420 N load capacity per slide pair
MaterialCold rolled steel
FinishPoxylube 500 M
Supply schedule1 Pair of telescopic slides
How suppliedFlat packed kit
TEL00004
TEL00175
Solid Bearing Telescopic Slide, C-300-SD d mL(N) A B C D E Bore holes For rack type Order no. UP
420 254.0 276.1 219.2 19.8 235.0 3 05.043.000.9
420 304.8 276.1 219.2 19.8 235.0 3 05.043.001.9
400 355.6 377.7 320.8 29.5 336.6 4 05.043.002.9
400 406.4 377.7 320.8 29.5 336.6 4 05.043.003.9
400 457.2 377.7 320.8 29.5 336.6 4 05.043.004.9
375 508.0 530.1 473.2 89.7 489.0 5 05.043.005.9
375 558.8 530.1 473.2 89.7 489.0 5 05.043.006.9
375 609.6 530.1 473.2 89.7 489.0 5 05.043.007.9
355 660.4 682.8 625.6 57.9 641.4 7 05.043.008.9
355 711.2 682.8 625.6 57.9 641.4 7 05.043.009.9
355 762.0 682.8 625.6 57.9 641.4 7 05.043.018.9
See also: the current
Telecom Special Catalogue!Where you will find more products:
• Indoor 19” rack systems
• Outdoor 19” rack systems
• Free-standing and wall cabinets
• Power supply systems
• Thermal management
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
6.23
S Y S T E M A C C E S S O R I E S
The compatible mounting kit for every rack type
miracel miracel miracel miracel smaract smaract smaract double- double-
T-slot Mount. holes Server Swing frame T-slot Mount. holes Server MaxLoad prorack prorack ConAct SoHo
T-slot Mount. holes Description Order no. UP
● ●Mounting kit 05.041.320.9 1 set
T-slot, M5 wide
● ●Mounting kit 05.041.321.9 1 set
Mount. holes, M5/BI 1.5
● ● ●Mounting kit 05.041.325.9 1 set
Mount. holes, M5/BI 2.5
●Mounting kit 05.041.323.9 1 set
dpr T-slot, M5 narrow
●Mounting kit 05.041.322.9 1 set
dpr Mount. holes,M5
●Mounting kit 05.041.324.9 1 set
ConAct M5
The compatible mounting kit for front panel mountingModel: Z-form screw
● ●FP mounting kit 05.041.325.9 1 set
T-slot, M5 wide
● ● ● ●FP mounting kit 05.041.326.9 1 set
Mount. holes, M5/BI 1.5
● ● ● ● ●FP mounting kit 05.041.327.9 1 set
Mount. holes, M5/BI 2.5
●FP mounting kit 05.041.328.9 1 set
T-slot, M5 narrow
Model: Countersunk screw+rosette
● ●FP mounting kit 05.041.340.9 1 set
T-slot, M5 wide
● ● ● ●FP mounting kit 05.041.341.9 1 set
Mount. holes, M5/BI 1.5
● ● ● ● ●FP mounting kit 05.041.342.9 1 set
Mount. holes, M5/BI 2.5
●FP mounting kit 05.041.328.9 1 set
T-slot, M5 narrow
miracel miracel miracel miracel smaract smaract smaract double- double-
T-slot Mount. holes Server Swing frame T-slot Mount. holes Server MaxLoad prorack prorack ConAct SoHo
T-slot Mount. holes Description Order no. UP
miracel miracel miracel miracel smaract smaract smaract double- double-
T-slot Mount. holes Server Swing frame T-slot Mount. holes Server MaxLoad prorack prorack ConAct SoHo
T-slot Mount. holes Description Order no. UP
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
S Y S T E M A C C E S S O R I E S
6.24
The compatible accessories for every rack type
miracel miracel miracel miracel smaract smaract smaract double- double-
T-slot Mount. holes Server Swing frame T-slot Mount. holes Server MaxLoad prorack prorack ConAct SoHo
T-slot Mount. holes Description Order no. UP
● ●Spring nut 01.350.431.9 1 set
M5 wide
●Spring nut 05.041.503.9 1 set
M5 narrow
● ●Spring nut 01.350.405.9 1 set
M6
● ● ● ●Caged nut 05.041.513.7 1 set
M5/BI 1.5
● ● ● ● ●Caged nut 05.041.518.7 1 set
M5/BI 2.5
● ● ●Oval head screw 05.041.330.9 1 set
Z form, M5 x 10
● ● ● ● ● ● ● ● ●Oval head screw 05.041.331.9 1 set
Z-form, M5 x 16
● ● ●Countersunk screw 05.041.203.9 1 set
M5 x 12 + rosette
● ● ● ● ● ● ● ● ●Countersunk screw 05.041.290.9 1 set
M5 x 16+ rosette
Mounting Tool for Caged Nut
W H D HU d L Model Order no. UP
01.130.985.9 1 unitMIR00114
- Makes clipping the caged nut into theextrusion easier
MaterialSpring steel
Supply schedule1 Mounting tool
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
6.25
S Y S T E M A C C E S S O R I E S
T-Slot Mounting Kit, M5, WideFor miracel / smaract
- For mounting 19” front panels and19” components
Supply schedule100 spring nuts M5, wide100 oval head screws, Z form, M5 x 10
20 caged nuts, M5 / plate, 1.5 mm20 cylinder screws, M5 x 8
How suppliedFlat packed kit
MEC20125
MEC20126
MEC20126
W H D HU d L Model Order no. UP
05.041.320.9 1 set
Mounting Holes Mounting Kit, M5 / Plate, 1.5 mmFor miracel / smaract
- For mounting 19” front panels and19” components
Supply schedule100 caged nuts M5 / plate, 1.5 mm100 oval head screws, Z form, M5 x 16
20 spring nuts, M5 wide20 cylinder screws, M5 x 8
How suppliedFlat packed kit
W H D HU d L Model Order no. UP
05.041.321.9 1 set
Mounting Holes-Server Extrusion Mounting Kit, M5 / Plate, 2.5 mmFor miracel / smaract
- For mounting 19” front panels and19” components
Supply schedule100 caged nuts M5 / plate, 2.5 mm100 oval head screws, Z form, M5 x 16
20 spring nuts, M5 wide20 cylinder screws, M5 x 8
How suppliedFlat packed kit
W H D HU d L Model Order no. UP
05.041.325.9 1 set
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
S Y S T E M A C C E S S O R I E S
6.26
T-Slot Mounting Kit, M5, NarrowFor doubleprorack
- For mounting 19” front panels and19” components
Supply schedule150 spring nuts, M5 narrow
50 oval head screws, Z form, M5 x 1050 cylinder screws, M5 x 10
How suppliedFlat packed kit
W H D HU d L Model Order no. UP
05.041.323.9 1 set
Mounting Holes Mounting Kit, M5For doubleprorack
- For mounting 19” front panels and19” components
Supply schedule100 caged nuts M5 / plate, 2.5 mm
50 oval head screws, Z form, M5 x 1640 spring nuts, M5 narrow40 cylinder screws, M5 x 10
How suppliedFlat packed kit
W H D HU d L Model Order no. UP
05.041.322.9 1 set
Mounting Holes Mounting Kit, M5For ConAct
- For mounting 19” front panels and19” components
Supply schedule50 caged nuts, M5 / plate, 1.5 mm50 oval head screws, Z form, M5 x 1650 cylinder screws, M5 x 825 locking nuts, M5
How suppliedFlat packed kit
W H D HU d L Model Order no. UP
05.041.324.9 1 set
MEC20127
MEC20126
MEC20096
S = Switchn = Number of socketsF1 = Standard side panelF2 = Design side panel19” = Suitable for 19” componentssafe = Child-safe
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
6.27
S Y S T E M A C C E S S O R I E S
Front Panel Mounting Kit, T-Slot, M5, WideFor miracel / smaract
- For mounting 19” front panels and19” components
Supply scheduleType 1:50 spring nuts, M5 wide50 oval head screws, Z form, M5 x 10Type 2:50 spring nuts, M5 wide50 countersunk screws, M5 x 1250 rosettes
How suppliedFlat packed kit
W H D HU d L Model Order no. UP
Type 1: Z-form screw 05.041.325.9 1 set
Type 2: Screw+rosette 05.041.340.9 1 set
Front Panel Mounting Kit, Mounting Holes, M5/Plate, 1.5 mmFor miracel / smaract / ConAct / SoHo
- For mounting 19” front panels and19” components
Supply scheduleType 1:50 caged nuts, M5 / plate 1.5 mm 50 ovalhead screws, Z form, M5 x 16Type 2:50 caged nuts, M5 / plate, 1.5 mm50 countersunk screws, M5 x 1650 rosettes
How suppliedFlat packed kit
MEC20098
MEC20097
W H D HU d L Model Order no. UP
Type 1: Z-form screw 05.041.326.9 1 set
Type 2: Screw+rosette 05.041.341.9 1 set
Type 1
Type 2
Front Panel Mounting Kit, Mounting Holes, M5/Plate, 2.5 mmFor miracel / smaract / MaxLoad / doubleprorack
- For mounting 19” front panels and19” components
Supply scheduleType 1:50 caged nuts, M5 / plate 2.5 mm50 oval head screws, Z form, M5 x 16Type 2:50 caged nuts, M5 / plate, 2.5 mm50 countersunk screws, M5 x 1650 rosettes
How suppliedFlat packed kit
MEC20098
MEC20097
W H D HU d L Model Order no. UP
Type 1: Z-form screw 05.041.337.9 1 set
Type 2: Screw+rosette 05.041.342.9 1 set
Type 1
Type 2
MEC20129
MEC20130
Type 1
Type 2
S Y S T E M A C C E S S O R I E S
6.28
Front Panel Mounting Kit, T-Slot, M5, NarrowFor doubleprorack
- For mounting 19” front panels and19” components
Supply scheduleType 1:50 spring nuts, M5 narrow50 oval head screws, Z-form, M5 x 10Type 2:50 caged nuts, M5 narrow50 countersunk screws, M5 x 1250 rosettes
How suppliedFlat packed kit
MEC20129
MEC20130
W H D HU d L Model Order no. UP
Type 1: Z-form screw 05.041.338.9 1 set
Type 2: Screw+rosette 05.041.343.9 1 set
Type 1
Type 2
Spring Nut
- For clipping into T-slots at any position
Type 1: M5 wideFor miracel / smaract
Type 2: M5 narrowFor doubleprorack
Type 3: M6For miracel / smaract
Supply schedule50 Spring nuts
How suppliedFlat packed kit
W H D HU d L Model Order no. UP
Type 1: M5 wide 01.350.431.9 1 set
Type 2: M5 narrow 05.041.503.9 1 set
Type 3: M6 01.350.405.9 1 set
MEC00060
Caged Nut
- For clipping into extrusions with mountingholes
Type 1: M5 / plate, 1.5 mmFor miracel / smaract / ConAct / SoHo
Type 2: M5 / plate, 2.5 mmFor miracel Server / smaract Server /MaxLoad / doubleprorack mountingholes
Supply schedule50 Caged nuts
How suppliedFlat packed kit
W H D HU d L Model Order no. UP
Type 1: M5 / plate, 1.5 mm 05.041.513.7 1 set
Type 2: M5 / plate, 2.5 mm 05.041.518.7 1 set
MEC20139
S = Switchn = Number of socketsF1 = Standard side panelF2 = Design side panel19” = Suitable for 19” componentssafe = Child-safe
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
6.29
S Y S T E M A C C E S S O R I E S
Oval Head Screw
- IEC DIN 967
Type 1: M5 x 10Type 2: M5 x 16
Supply schedule50 Oval head screws, Z-form
How suppliedFlat packed kit
W H D HU d L Model Order no. UP
Type 1: M5 x 10 05.041.330.9 1 set
Type 2: M5 x 16 05.041.331.9 1 setMEC20140
Countersunk Screw + Rosette
- IEC DIN EN ISO 7047
Type 1: M5 x 12Type 2: M5 x 16
Supply schedule50 Countersunk screws50 Rosettes
How suppliedFlat packed kit
W H D HU d L Model Order no. UP
Type 1: M5 x 10 05.041.203.9 1 set
Type 2: M5 x 16 05.041.290.9 1 set
MEC20141
S = Switchn = Number of socketsF1 = Standard side panelF2 = Design side panel19” = Suitable for 19” componentssafe = Child-safe
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
S Y S T E M A C C E S S O R I E S
6.30
MEC00014
MEC00013
MEC00013
MEC20021
Oval Head ScrewWith phillips head
- IEC DIN EN ISO 7045 Supply schedule1 Set of 50 units
Cylinder ScrewWith hexagon head
- IEC ISO 4762 (modified) Supply schedule1 Set of 50 units
W H D HU d L Model Order no. UP
5 M 2.5 no washer 05.041.600.8 1 set
8 M 2.5 no washer 05.041.602.8 1 set
6 M 3 no washer 05.041.604.8 1 set
6 M 4 no washer 05.041.606.8 1 set
8 M 4 no washer 05.041.607.8 1 set
8 M 5 no washer 05.041.611.8 1 set
12 M 4 no washer 05.041.609.8 1 set
12 M 5 + washer 05.041.613.8 1 set
16 M 5 + washer 05.041.614.8 1 set
16 M 6 + washer 05.041.616.8 1 set
W H D HU d L Model Order no. UP
6 M 5 05.041.573.8 1 set
8 M 5 05.041.574.8 1 set
8 M 5 microencapsulated 01.041.575.9 1 set
Cylinder ScrewWith hexagon head
- DIN 6912 Supply schedule1 Set of 50 units
W H D HU d L Model Order no. UP
10 M 5 05.041.598.8 1 set
Tensiloc Nut
MaterialSteel nickel-plated
Supply schedule1 Set of 50 units
W H D HU d L Model Order no. UP
M 5 05.041.533.8 1 set
Hexagon Head ScrewWith contact washer, M 4 x 12
- IEC DIN EN 24017- For mounting cross extrusions
19” Modular chassis
Supply schedule1 Set of 50 units
W H D HU d L Model Order no. UP
05.041.577.8 1 set
S = Switchn = Number of socketsF1 = Standard side panelF2 = Design side panel19” = Suitable for 19” componentssafe = Child-safe
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
7DI-STRIPSocket Strips 7.2 to 7.41
7.1
S O C K E T S T R I P S
S O C K E T S T R I P S
7.2
DOS003654DOS003173
19’’
1 H
U
= 44
.45
mm
465 mm
483 mm
DOS002911
DOS003122
Socket Strips
DI-STRIPStrong points 7.3
DI-STRIPTriplePower 7.6Classic 7.8Compact 7.9Protector 7.10Cleaner 7.12Safety Basic 7.13Safety Standard 7.14Master-Slave 7.15Combi 7.16GST18, 1-phase 7.17GST18, 3-phase 7.19
DI-STRIPEuro Plug System 7.21
DI-STRIPFor France 7.24
DI-STRIPFor Switzerland 7.35
DI-STRIPFor USA 7.38
SerimatClassic 7.40Compact 7.40Classic Black Line 7.41
NoteYou will find more information on DI-STRIPat: www.knuerr-distrip.com
7.3
S O C K E T S T R I P S
DI-STRIPStrong points
Robust!Plug field protected with raisedcasing edges
StabilityHigh stability and torsionalstrength provided through closedsheet steel casing
Electrical SafetyFull power for all connected con-sumers due to full-length brassbusbarShock hazard-proof and lowcontact resistance with doublespring contacts
19” InstallationOptimal use of space with19” installation:- With low height, 1 HU
(44.45 mm)- With 45° positioning of the
sockets
International compatibilityNumerous standard productsin accordance with internationalnorms and standards. Specialmodels on request.
FlexibilityPlenty of room for movementwith 2.5 m power supply cable.Flexibility provided by standardplug with dual earthing system.
6
5
4
3
2
1 AestheticsAppealing design with extrudedhousing and design side panelsin visible area.
Cost-consciousSimple and quick mounting onthe rack extrusion.
Universal1 and 3-phase systems.
ModularitySocket strip modules can beeasily combined using plug-inconnections.
Plug-inProven GST18 plug-in system forconnecting socket strip modules.
10
10
9
8
7
DOS007215
DOS003667
DOS003186
DOS201349 DOS2014410DOS201318
DOS2014210
S O C K E T S T R I P S
7.4
DI-STRIP ClassicSerimat ClassicSerimat Classic Black Line- Socket spacing: 100 mm- With/without switch
DI-STRIP CompactSerimat Compact- Socket spacing: 50 mm- With/without switch
DI-STRIP Protector- User protection (FI)- Circuit breaker (LS)- User protection and circuit breaker (FI/LS)
DI-STRIP Protector Emergency STOP- User protection / circuit breaker (FI/LS)- With emergency stop switch
DI-STRIP Power Cleaner- Mains filter (MF)
DI-STRIP Safety Basic
DI-STRIP Safety Standard- Overvoltage protection
DI-STRIP Master Slave- Automatic consumer switching
DI-STRIP Combi- Automatic consumer switching
with overvoltage protection and mains filter
DI-STRIP GST18Compact/Master Slave/Safety Basic/Safety Standard/IEC320- Without cable for GST18 plug-in system (Wieland)
GST18 accessories
Standard DIN 49 440
Page 7.8 / Page 7.40 / Page 7.41
Page 7.9 / Page 7.40
Page 7.10
Page 7.11
Page 7.12
Page 7.13
Page 7.15
Page 7.16
Page 7.17
Page 7.20
DOS00402
DOS00348
DOS00401
DOS00710
DOS00399
DOS00679 DOS20112
DOS00394
DOS00457
19’’
19’’
19’’
19’’
19’’
19’’
19’’
19’’
DOS00455
DOS00400 DOS20108
DOS00397 DOS20110
DOS00396
Euro PlugSystem IEC 320
Page 7.21
Page 7.18
Page 7.18
Page 7.18
19’’
7.5
S O C K E T S T R I P S
DOS00402 DOS00717 DOS00685
DOS00399
DOS00463
DOS20103
DOS00401 DOS20074 DOS00686 DOS20121
19’’
19’’
19’’
19’’
19’’ 19’’ 19’’
DOS20065 DOS00719
DOS20059
DOS00400
DOS00397 DOS00720 DOS00687
DOS00464
UTE Standard
Page 7.24
Page 7.25
Page 7.26
Page 7.27
Page 7.28
Page 7.29
Page 7.31
Page 7.32
Page 7.33
Page 7.34
Swiss Standard
Page 7.35
Page 7.36
Page 7.37
Page 7.37
USA Standard
Page 7.38
Page 7.38
Page 7.39
Three-Phase CurrentPlug-In System
Page 7.7
Page 7.19
19’’ 19’’ 19’’ 19’’
S O C K E T S T R I P S
7.6
TriplePowerNew: T h re e P h a s e D I - S T R I P
TriplePowerThe TriplePower name reflects the performance of ourlatest development. The DI-STRIP TriplePower suppliesnetwork racks with three times the normal power. Thisrequirement is generated by the increasingly greaterpacking densities and the constantly rising energy require-ments in racks, which are often caused by aptly named“Blade Servers” or 1 HU “Pizza Servers”, more than 40 ofwhich can be integrated into a Knürr miracel rack.
The DI-STRIP TriplePower uses a classic 3-phase feedwith 3x16A, which it optimally distributes throughout thewhole rack. The 23 HU and 41 HU standard lengths coverthe entire rack height range of the Knürr rack families,smaract2 and miracel.
DO
S201
49
DO
S201
48
In the maximum configura-tion level, up to 48 userscan be connected to aDI-STRIP TriplePower(Euro socket strip). Withredundant feed, 96A canconsequently be providedin a 19” rack with only twoDI-STRIP TriplePower.
NoteYou will find more information on TriplePowerat: www.triple-power.com
7.7
S O C K E T S T R I P S
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
Replace .x with the number of the required colour combination:.1 = RAL 7035, .6 = RAL 7035/RAL 2003
DOS20126
DI-STRIP TriplePower Euro Plug-In System, IEC 320With cable
- With 3-way Euro combinations ofIEC 320 sockets
- Cable: H05VV-F 5G 2.5 mm2
- Cable: 2.5 m- Simple mounting on the rack extrusion- 3x16A feed as standard- Ideal for implementing redundancies
(e.g. 96 A with redundant feed)- Colour coding of the phase assignment- Optimum distribution over the entire rack
height (23 HU and 41 HU)- Alternative to 3-phase GST18 system
(see page 7.19)
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableCable: PVC
DimensionsSocket spacing: 24 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)
ApprovalsCE label in accordance with low voltageguideline 73/23/EWG,EMC guideline 89/336/EWGTÜV GS Certificate
ColourCasing: RAL 7035 light-greyPlastic parts: RAL 7021 dark-grey
Load rating250/400 V, 3x16 A, 10 A Euro module
Approval symbols for IEC 320 3-wayEuro combinationsVDE, UL, CSA, SEV, SEMKO
Supply schedule1 Socket strip2 Mounting brackets
L S n F1 F2 19“ Safe Model Order no. UP
1033 24 ● 03.600.024.1 1 unit
1833 48 ● 03.600.048.1 1 unit
DI-STRIP TriplePowerStrong points
DOS201311 DOS201263
DOS201472 DOS201294
Cost-consciousSimple and quick mounting onthe rack extrusion.Costs reduction with regard tomounting and wiring.
Feed- 3x16A as standard- Ideal for implementing
redundancies (e.g. 96 A)
At a glanceColour coding of phaseassignment (L1, L2, L3).
InstallationOptimum distribution over theentire rack height(23 HU and 41 HU).
Technical alternatives- For 3-phase GST18 system
(see page 7.19).
4
3
2
1
S O C K E T S T R I P S
7.8
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
Replace .x with the number of the required colour combination:.1 = RAL 7035, .6 = RAL 7035/RAL 2003
DOS00260 With switch
Without switchDOS00261
- Optionally with lit switch, 2-pole switching- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 100 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWGVDE Certificate
Colour combinationFinal digit of order number .1:RAL 7035, light-greyFinal digit of order number .6:Casing, RAL 2003, pastel orangePlastic parts: RAL 7035, light-grey
Load rating250 VAC/16 A
Supply schedule1 Socket strip2 Mounting brackets
DI-STRIP ClassicStandard DIN 49 440 (VDE)
L S n F1 F2 19” Safe Model Order no. UP
1783 17 ● 03.300.067.x 1 unit
1383 13 ● 03.300.063.x 1 unit
983 9 ● 03.300.059.x 1 unit
583 5 ● 03.300.055.x 1 unit
1733 ● 16 ● with switch 03.302.066.x 1 unit
1333 ● 12 ● with switch 03.302.062.x 1 unit
933 ● 8 ● with switch 03.302.058.x 1 unit
533 ● 4 ● with switch 03.302.054.x 1 unit
DOS00403
7.9
S O C K E T S T R I P S
DOS20021 With switch
With switch
With switch
Without switch
Without switch
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
Replace .x with the number of the required colour combination:.1 = RAL 7035, .6 = RAL 7035/RAL 2003
DOS00401
DOS00263
L
DOS20020
DOS00262
- Optionally with lit switch, 2-pole switching- 19” Installation option (with length 483 mm)- 2 Versions: Standard side panel or Design
side panel- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWGVDE Certificate
Colour combinationFinal digit of order number .1:RAL 7035, light-greyFinal digit of order number .6:Casing, RAL 2003, pastel orangePlastic parts: RAL 7035, light-grey
Load rating250 VAC/16 A
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DI-STRIP CompactStandard DIN 49 440 (VDE)
L S n F1 F2 19” Safe Model Order no. UP
883 15 ● 03.300.015.x 1 unit
732 11 ● 03.300.111.x 1 unit
683 11 ● 03.300.011.x 1 unit
532 7 ● ● 03.301.107.x 1 unit
532 7 ● 03.300.107.x 1 unit
483 7 ● ● 03.300.007.x 1 unit
382 4 ● ● 03.301.104.x 1 unit
382 4 ● 03.300.104.x 1 unit
333 4 ● 03.300.004.x 1 unit
883 ● 14 ● with switch 03.302.014.x 1 unit
732 ● 10 ● with switch 03.302.110.x 1 unit
683 ● 10 ● with switch 03.302.010.x 1 unit
532 ● 6 ● ● with switch 03.303.106.x 1 unit
532 ● 6 ● with switch 03.302.106.x 1 unit
483 ● 6 ● ● with switch 03.302.006.x 1 unit
382 ● 3 ● ● with switch 03.303.103.x 1 unit
382 ● 3 ● with switch 03.302.103.x 1 unit
333 ● 3 ● with switch 03.302.003.x 1 unit
S O C K E T S T R I P S
7.10
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
DOS00692
Protector FIRCCB for user protection- Prevents electrical and fire accidents
with safe and rapid switching off- Activates with fault current, e.g. acci-
dental contact of mains voltage-carryingparts with defective insulation
- Residual operating current I� = 10mAfor alternating and intermittent faultdirect current
- Reaction time 10 - 30 ms
- 19” Installation option(with length 483 mm)
- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 78 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationFinal digit of order number .1:RAL 7035, light-greyPlastic parts: RAL 7035 light-grey
Load rating250 VAC/16 A
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DOS20065 With fault current circuit breaker
With fault current circuit breaker
With circuit breaker
DOS00264 With circuit breaker
DOS00264
DI-STRIP Protector FIStandard DIN 49 440 (VDE)
L S n F1 F2 19” Safe Model Order no. UP
883 13 ● 03.304.013.1 1 unit
683 9 ● 03.304.009.1 1 unit
483 5 ● ● 03.304.005.1 1 unit
Protector circuit breaker- Circuit breaker for overload and short
circuit- Protects cables and feeds with rapid
switching off with short circuit anddefined delayed cutoff with overload
- Circuit breaker: 16 A- Tripping characteristic
type B, 2-pole
- 19” Installation option(with length 483 mm)
- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 78 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWGVDE Certificate
Colour combinationFinal digit of order number .1:RAL 7035, light-greyPlastic parts: RAL 7035 light-grey
Load rating250 VAC/16 A
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DI-STRIP Protector LSStandard DIN 49 440 (VDE)
L S n F1 F2 19” Safe Model Order no. UP
883 13 ● 03.308.013.1 1 unit
683 9 ● 03.308.009.1 1 unit
483 5 ● ● ● 03.308.005.1 1 unit
7.11
S O C K E T S T R I P S
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
DOS00693
DOS00264
DOS20059
DOS00486 Classic withemergency stop switch
DOS00487 Protector withemergency stop switch
Protector FI / LS- RCCB and circuit breaker- Provides a combination of user, overload
and short circuit protection- Residual operating current I� = 30 mA
for alternating and intermittent faultdirectcurrent
- Circuit breaker 16 A- Tripping characteristic
type B, 2-pole
- 19” Installation option(with length 483 mm)
- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 78 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationFinal digit of order number .1:RAL 7035, light-greyPlastic parts: RAL 7035, light-grey
Load rating250 VAC/16 A
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DI-STRIP Protector FI / LSStandard DIN 49 440 (VDE)
- With 2-pole emergency stop switch for userprotection
- For protecting operating personnel- For manual emergency switch-off
of connected equipment- Phase and neutral conductors are safely
separated- Switch must be specifically unlocked to
restart- 19” Installation option
(with length 483 mm)- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: Classic: 100 mm Compact: 50 mmHeight: 101 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationsFinal digit of order number .1:RAL 7035 light-greyPlastic parts: RAL 7035 light-grey
Load rating250 VAC/16 A
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DI-STRIP Protector Emergency STOPStandard DIN 49 440 (VDE)
L S n F1 F2 19” Safe Model Order no. UP
883 13 ● 03.310.013.1 1 unit
683 9 ● 03.310.009.1 1 unit
483 5 ● ● 03.310.005.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
683 10 ● Compact 03.326.010.1 1 unit
483 8 ● ● Compact 03.326.006.1 1 unit
1333 12 ● Classic 03.326.062.1 1 unit
933 8 ● Classic 03.326.058.1 1 unit
S O C K E T S T R I P S
7.12
DOS00456
DOS00488
DOS20061
DOS00266
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
Replace .x with the number of the required colour combination:.1 = RAL 7035, .6 = RAL 7035/RAL 2003
- With 2-pole emergency stop switch for userprotection
- For protecting operating personnel- For manual emergency switch-off
of connected equipment- Phase and neutral conductors are safely
separated- Switch must be specifically unlocked to
restart- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing:Compact: 50 mmHeight: 101 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationsFinal digit of order number .1:RAL 7035, light-greyPlastic parts: RAL 7035 light-grey
AdditionalWith 2-pole fault current switch andcircuit breakerProvides a combination of user,overload and short circuit protection
Load rating250 VAC/16 A
Supply schedule1 Socket strip2 Mounting brackets
DI-STRIP Protector Emergency Stop FI / LSStandard DIN 49 440 (VDE)
- With integrated mains filter- The integrated mains filter prevents,
- high frequency disturbances from themains affecting electronic equipment.
- the transmission of disturbances from theequipment to the mains.
- The mains filter meets the requirements ofVDE 0565-3 and EN 133200.
- 19” Installation option (with length 483 mm)- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWGVDE Certificate
Colour combinationFinal digit of order number .1:RAL 7035, light-greyFinal digit of order number .6:Casing, RAL 2003, pastel orangePlastic parts: RAL 7035, light-grey
Load rating250 VAC/16 A
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DI-STRIP Power CleanerStandard DIN 49 440 (VDE)
L S n F1 F2 19” Safe Model Order no. UP
683 8 ● 03.328.008.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
883 13 ● 03.312.013.x 1 unit
683 9 ● 03.312.009.x 1 unit
483 5 ● ● 03.312.005.x 1 unit
7.13
S O C K E T S T R I P S
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
Replace .x with the number of the required colour combination:.1 = RAL 7035, .6 = RAL 7035/RAL 2003
DOS00306
DOS20068
DOS00270
With overvoltage protection
With overvoltage protection
With overvoltage protection
- With overvoltage protection- A combination of varistors and gas discharge
arresters guarantee a rapid response andhigh discharge capacity
- Simple but effective protection againstindirect strikes and voltage spikes from themains
- Double protection:- 1. Up to max. surge current resistance,
transient overvoltages are reduced tonon-damaging values
- 2. If the surge current resistance is excee-ded, the connected equipment is separatedfrom the mains to protect against furtherovervoltage spikes (the green function dis-play goes off). The protection module mustthen be changed for further use.To increase the protection function, a coarsefilter should be switched in advance in thebuilding installation.
- 19” Installation option (with length 483 mm)- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWGVDE Certificate
Colour combinationFinal digit of order number .1:RAL 7035, light-greyFinal digit of order number .6:Casing, RAL 2003, pastel orangePlastic parts: RAL 7035, light-grey
Technical dataMains voltage 230 VAC +/- 10 %Nominal current 16AFeature class: D (refined protection inaccordance with DIN VDE 0675)Surge current resistance (8/20 µs wave):max. 10 kAProtection level (1.5/50 µs wave): ‹ 1200 V(L/N against PE)
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DI-STRIP Safety BasicStandard DIN 49 440 (VDE)
L S n F1 F2 19” Safe Model Order no. UP
732 10 ● 03.316.110.x 1 unit
683 10 ● 03.316.010.x 1 unit
532 6 ● ● 03.317.106.x 1 unit
532 6 ● 03.316.106.x 1 unit
483 6 ● ● 03.316.006.x 1 unit
432 4 ● ● 03.317.104.x 1 unit
432 4 ● 03.316.104.x 1 unit
383 4 ● 03.316.004.x 1 unit
S O C K E T S T R I P S
7.14
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
Replace .x with the number of the required colour combination:.1 = RAL 7035, .6 = RAL 7035/RAL 2003
DOS20069
DOS00307
DOS00271
With overvoltage protectionand mains filter
With overvoltage protectionand mains filter
- With overvoltage protection- With integrated mains filter- With lit switch, 2-pole switching- A combination of varistors and gas discharge
arresters guarantee a rapid response andhigh discharge capacity
- Simple but effective protection againstindirect strikes and voltage spikes from themains and high frequency disturbancesignals
- Overvoltage protection:- 1. Up to max. surge current resistance,
transient overvoltages are reduced tonon-damaging values
- 2. If the surge current resistance is excee-ded, the connected equipment is separatedfrom the mains to protect against furtherovervoltage spikes (the green functiondisplay goes off). The protection modulemust then be changed for further use.To increase the protection function, acoarse filter should be switched inadvance in the building installation.
- Mains filter:- High-frequency disturbance signals are
effectively eliminated by the low-passmains filter
- 19” Installation option(with length 483 mm)
- Socket rotation: 45°- Cable: HO5VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWGVDE Certificate
Colour combinationFinal digit of order number .1:RAL 7035, light-greyFinal digit of order number .6:Casing, RAL 2003, pastel orangePlastic parts: RAL 7035, light-grey
Technical dataMains voltage 230 VAC +/- 10 %Nominal current 16AFeature class: D (refined protection inaccordance with DIN VDE 0675)Surge current resistance (8/20 µs wave):max. 10 kAProtection level (1.5/50 µs wave): ‹ 1200 V(L/N against PE)Mains filter (high-stop): attenuation at1MHz - › 45 dB
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DI-STRIP Safety StandardStandard DIN 49 440 (VDE)
L S n F1 F2 19” Safe Model Order no. UP
883 ● 13 ● with switch 03.318.013.x 1 unit
732 ● 9 ● ● with switch 03.319.109.x 1 unit
732 ● 9 ● with switch 03.318.109.x 1 unit
683 ● 9 ● with switch 03.318.009.x 1 unit
532 ● 5 ● ● with switch 03.319.105.x 1 unit
532 ● 5 ● with switch 03.318.105.x 1 unit
483 ● 5 ● ● with switch 03.318.005.x 1 unit
7.15
S O C K E T S T R I P S
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
Replace .x with the number of the required colour combination:.1 = RAL 7035, .6 = RAL 7035/RAL 2003
DOS20070
DOS00268
With master-slave module
With master-slave module
- If the master equipment is switched, theslave sockets are also switched (together,with a short delay to the master). Enableseasy switching on and off of several difficultto access pieces of equipment. Switchingthresholds can be set from outside viapotentiometer.
- Note:- Power consumption of the master equip-
ment must be constantly over the switch-ing-on threshold. When switching off themaster equipment, the power consump-tion must fall below the switching-offthreshold.
- 19” Installation option(with length 483 mm)
- Socket rotation: 45°- Cable: HO5VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWGVDE Certificate
Colour combinationFinal digit of order number 1:RAL 7035, light-greyPlastic parts: RAL 7035, light-grey
Load rating250 VAC/16 A
Technical dataThreshold setting rangeOn: 20 mA - 200 mA (approx. 55 mA,supply status)Off: 16 mA - 160 mA (approx. 44 mA,supply status)Switching delay 550 ms +/- 20%Electronic module, 2-pole switching
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DI-STRIP Master-SlaveStandard DIN 49 440 (VDE)
L S n F1 F2 19” Safe Model Order no. UP
683 9 ● 03.314.009.x 1 unit
483 5 ● ● 03.314.005.x 1 unit
See also: the current
Telecom Special Catalogue!Where you will find more products:
• Indoor 19” rack systems
• Outdoor 19” rack systems
• Free-standing and wall cabinets
• Power supply systems
• Thermal management
S O C K E T S T R I P S
7.16
- Master-slave with overvoltage protectionand mains filter
- Automatic switching of equipment withintegrated overvoltage protection and mainsfilter
- Combines functions of the master-slave(page 7.15) and the safety standard(page 7.14)
- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWGVDE Certificate
Colour combinationFinal digit of order number .1:RAL 7035, light-greyPlastic parts: RAL 7035 light-grey
Technical dataOvervoltage protection and mains filter:Mains voltage: 230 VAC +/- 10 %Nominal current 16AFeature class: D (refined protection inaccordance with DIN VDE 0675)Surge current resistance (8/20 µs wave):max. 10 kAProtection level (1.5/50 µs wave): ‹ 1500 V(L/N against PE)Mains filter (low-pass): attenuation at1MHz - › 45 dBMaster-slave function:Threshold setting rangeOn: 20 mA - 200 mA (approx. 55 mA,supply status)Off: 16 mA - 160 mA (approx. 44 mA,supply status)Switching delay 550 ms +/- 20%Electronic module, 2-pole switching
Supply schedule1 Socket strip2 Mounting brackets
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
DOS00273
DOS00325
DOS00272
With master-slaveovervoltage protection
and mains filter
With master-slaveovervoltage protection
and mains filter
DI-STRIP CombiStandard DIN 49 440 (VDE)
L S n F1 F2 19” Safe Model Order no. UP
782 9 ● 03.320.109.1 1 unit
733 9 ● 03.320.009.1 1 unit
582 5 ● ● 03.321.105.1 1 unit
582 5 ● 03.320.105.1 1 unit
533 5 ● 03.320.005.1 1 unit
7.17
S O C K E T S T R I P S
DOS20060
DOS00663
DOS20045
DOS20046
With switch
Without switch
DOS20072
- Quick and efficient plug connection system- Plug-in electro-installation in place of
conventional wiring- Speed:
- Due to simple plugging together ofpreconfigured elements
- Flexibility:- Due to the cable (cable length)
- Efficient:- Easy exchange of socket strips, without
cabling expenses- Safety:
- Due to plug system, all faulty installationsare excluded
- Space-saving:- Use of protection and switching functions
can be extended to additional socket stripswith no loss of plugging space by extend-ing cable (maximum load rating of 16 A)
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brass
DimensionsSocket spacing: 50 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWGVDE Certificate
Colour combinationFinal digit of order number .1:RAL 7035, light-greyPlastic parts: RAL 7035, light-grey
Load rating250 VAC/16 A
Supply schedule1 Socket strip2 Mounting brackets
DI-STRIP GST18 Plug System (Wieland) CompactStandard DIN 49 440 (VDE)
L S n F1 F2 19” Safe Model Order no. UP
583 ● 6 ● with switch 03.302.206.1 1 unit
422 ● 3 ● with switch 03.302.203.1 1 unit
533 7 ● 03.300.207.1 1 unit
383 4 ● 03.300.204.1 1 unit
- With overvoltage protection- Technical description, see page 7.13
DI-STRIP Safety BasicWith GST18 plug system
DOS00464
- Technical description, see page 7.15
DI-STRIP Master SlaveWith GST18 plug system
DOS20073
- With overvoltage protection, with integrated mains filter and lit switch
- Technical description, see page 7.14
DI-STRIP Safety StandardWith GST18 plug system
L S n F1 F2 19” Safe Model Order no. UP
433 03.316.204.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
583 03.318.205.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
583 03.314.205.1 1 unit
S O C K E T S T R I P S
7.18
DOS20110
- With overvoltage protection- Technical description, see page 7.13
DI-STRIP Safety Basic Euro Socket System IEC 320With GST18 plug system
DOS20108
- Technical description, see page 7.12
DI-STRIP Power CleanerWith GST18 plug system
DOS20109
- With overvoltage protection with integratedmains filter
- Technical description, see page 7.14
DI-STRIP Safety StandardWith GST18 plug system
L S n F1 F2 19” Safe Model Order no. UP
483 03.316.206.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
483 6 03.318.206.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
483 6 03.612.206.1 1 unit
DI-STRIP EURO Socket System IEC 320With GST18 plug system
- With 3-way Euro combinations ofIEC 320 sockets
- Without fuse protection
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 24 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)
ApprovalsCE label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWGTÜV GS Certificate
ColourCasing: RAL 7035, light-greyPlastic parts: RAL 7021, dark-grey
Load rating250 VAC/10 A
Compliance symbols for IEC 320 3-wayEuro combinationsVDE, UL, CSA, SEV, SEMKO
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DOS20112
DOS20107 Input
Output forFurther Cabling
DOS20106
L S n F1 F2 19” Safe Model Order no. UP
383 6 ● 03.600.206.1 1 unit
7.19
S O C K E T S T R I P S
RequirementConstantly increasing energyrequirements in the rack causedby high packing densities(e.g. 1 HU Pizza Servers, BladeServers, etc.)
Solution3-Phase distributor with GST18plug system, e.g. 96 A and morewith redundant feed
Advantages- Modularity- Plug-in capability
(no wiring required)- Expandability- Cascadability- Easy implementation of redun-
dancies / UPS secured circuits- Mix of, for example,
DIN protected contacts /IEC 320 Euro systems
- Installation position freelyselectable
- Good alternatives to 3-phaseDI-STRIP Triple Power(see page 7.6)
3
2
1
- GST 18 socket for connecting GST18i5distributor block with 3 phases
- 5-pole (L1, L2, L3, N, PE) 250/400 V ~- Cable: HO5VV-F 5G 2.5 mm2
ColourBlack
Power Supply Cable, 3-PhaseAccessories for GST 18 plug system
L S n F1 F2 19” Safe Model Order no. UP
2000 04.000.048.0 1 unit
DOS20104
DOS20103
- For individual, customer-side connection- Modular plug-in connection- Distribution of 3 phases on various sockets- Including mounting panel
ColourBlack
GST18i5 Distributor Block, 3-Phase
L S n F1 F2 19” Safe Model Order no. UP
04.000.038.9 1 unit
New: 3-Phase in rack with GST18Strong points
DOS201471 DOS201322
DOS201423 DOS201353
A C C E S S O R I E S
7.20
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
- GST 18 plug- GST 18 socket- Cable, H05VV-F 3G 1.5 mm2
ColourFor colour coding circuits (e.g.UPS)
Connection CableAccessories for GST 18 plug system
L S n F1 F2 19” Safe Model Order no. UP
200 white 04.000.042.0 1 unit
200 black 04.000.042.9 1 unit
500 white 04.000.037.0 1 unit
500 black 04.000.037.9 1 unit
1000 white 04.000.044.0 1 unit
1000 black 04.000.044.9 1 unit
5000 white 04.000.045.0 1 unit
DOS00469
- With screw terminal for cross-section1.5-2.5 mm2 with cable strain relief
- For individual, customer-side additionalcabling
ColourWhite
GST18 Plug Part
L S n F1 F2 19” Safe Model Order no. UP
04.000.047.0 1 unit
DOS00470
- Mains plug CEE/VII - GST18 socket (Wieland)- Cable, H05VV-F 3G 1.5 mm2
ColourWhite
Power Supply Cable, 1-PhaseAccessories for GST 18 plug system
L S n F1 F2 19” Safe Model Order no. UP
2000 04.000.040.0 1 unit
5000 04.000.041.0 1 unit
DOS00467
- With screw terminal for cross-section1.5-2.5 mm2 with cable strain relief
- For individual, customer-side connection
ColourWhite
GST18 Socket Part
L S n F1 F2 19” Safe Model Order no. UP
04.000.046.0 1 unit
DOS00471
DOS20105
7.21
S O C K E T S T R I P S
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
DI-STRIP Euro Socket System IEC
- Optionally with lit switch,2-pole switching
- 19” Installation option- With 3-way Euro combinations of IEC 320
sockets- Cable: H05VV-F 3G 1.5 mm2
- Cable: 2.5 m- Moulded right angle plug, CEE7/VII- Without fuse protection
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 24 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)
ApprovalsCE label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWGTÜV GS Certificate
ColourEnclosure: RAL 7035, light-greyPlastic parts: RAL 7021, dark-grey
Load rating250 VAC/10 A
Compliance symbols for IEC 320 3-wayEuro combinationsVDE, UL, CSA, SEV, SEMKO
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DI-STRIP Euro Socket System IEC
- With fine-wire fuse 10A- Optionally with lit switch, 2-pole switching- 19” Installation option- With 3-way Euro combinations of IEC 320
sockets
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 24 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)
ApprovalsCE label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWGCSA Certificate, TÜV GS Certificate
ColourEnclosure: RAL 7035 light-greyPlastic parts: RAL 7021 dark-grey
Load rating250 VAC/10 A
Compliance symbols for IEC 320 3-wayEuro combinationsVDE, UL, CSA, SEV, SEMKO
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DOS20062
DOS00498
DOS20042
DOS00458
DOS20041
DOS20040
With switch
Without switch
L S n F1 F2 19” Safe Model Order no. UP
483 ● 9 ● ● with switch 03.602.009.1 1 unit
333 6 ● 03.600.006.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
383 6 ● 03.622.006.1 1 unit
483 9 ● ● 03.622.009.1 1 unit
433 ● 6 ● with switch 03.624.006.1 1 unit
S O C K E T S T R I P S
7.22
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
DI-STRIP Euro Socket System IEC
- With fine-wire fuse 10A- Optionally with lit switch, 2-pole switching- 19” Installation option- With 3-way Euro combinations of IEC 320
sockets
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 24 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)
ApprovalsCE label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWGCSA Certificate, TÜV GS Certificate
ColourEnclosure: RAL 7035 light-greyPlastic parts: RAL 7021 dark-grey
Load rating250 VAC/10 A
Compliance symbols for IEC 320 3-wayEuro combinationsVDE, UL, CSA, SEV, SEMKO
Supply schedule1 Socket strip2 Mounting brackets
DOS00460
DOS00461
DOS20044
DOS20043
Without switch
With switch
L S n F1 F2 19” Safe Model Order no. UP
333 6 ● 03.622.706.1 1 unit
433 9 ● 03.622.709.1 1 unit
383 ● 6 ● with switch 03.624.706.1 1 unit
483 ● 9 ● with switch 03.624.709.1 1 unit
DI-STRIP Euro Socket System, IEC 320With cable and right angle plug
- With thermal overload protection, 10 A(can be reset)
- With lit switch,1-pole switching
- 19” Installation option- With 2 5-way Euro combinations of IEC 320
sockets- Cable: H05VV-F 3G 2.5 mm2
- Cable: approx. 5 m- Moulded right angle plug, CEE7/VII,
optional blue 16 A-6h (2P+PE) CEE17 plug
Load rating250 VAC/10 A
DimensionsSocket spacing: 24 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)
ApprovalsCE label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableCable: PVC
ColourEnclosure: RAL 7035 light-greyPlastic parts: RAL 7021 dark-grey
Compliance symbols for IEC 320 3-wayEuro combinationsVDE, UL, CSA, SEV, SEMKO
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
DOS20102
L S n F1 F2 19” Safe Model Order no. UP
483 ● 10 ● ● with switch 03.632.010.1 1 unit
7.23
S O C K E T S T R I P S
Mains Cable for Euro Socket StripFor DIN 49 440 and French/Belgian standard
- Mains plug CEE/VII - Euro socket IEC 320- Cable: HO5VV-F 3G 1 mm2
Mains voltage250 VAC
Nominal current10 A
Mains Cable for Euro Socket StripFor Swiss standard
- Mains plug: type12 - Euro socket IEC 320- Cable: HO5VV-F 3G 1 mm2
Mains voltage250 VAC
Nominal current10 A
DOS00076
DOS00077
L S n F1 F2 19” Safe Model Order no. UP
2000 04.000.054.9 1 unit
5000 04.000.050.9 1 unit
L S n F1 F2 19” Safe Model Order no. UP
2000 04.000.055.9 1 unit
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
DOS00078
DOS00519
Mains Cable for Euro Socket StripFor British standard
- Mains plug: type BS 1363 - Euro socketIEC320
- Cable: HO5VV-F 3G 1 mm2
Mains voltage250 VAC
Nominal current10 A
Euro Connection Cable
- Mains plug: IEC 320 - Euro socket IEC 320- Cable: HO5VV-F 3G 1 mm2
Mains voltage250 VAC
Nominal current10 A
L S n F1 F2 19” Safe Model Order no. UP
2000 04.000.056.9 1 unit
L S n F1 F2 19” Safe Model Order no. UP
900 04.000.051.9 1 unit
S O C K E T S T R I P S
7.24
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
Replace .x with the number of the required colour combination:.1 = RAL 7035, .6 = RAL 7035/RAL 2003
- Optionally with lit switch,2-pole switching
- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 100 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationFinal digit of order number .1:RAL 7035, light-greyFinal digit of order number .6:Enclosure, RAL 2003, pastel orangePlastic parts: RAL 7035, light-grey
Load rating250 VAC/16 A
Supply schedule1 Socket strip2 Mounting brackets
DOS20018
DOS20019
DI-STRIP ClassicStandard CEE 7 V (UTE) / France
L S n F1 F2 19” Safe Model Order no. UP
1783 17 ● ● 03.400.067.x 1 unit
1383 13 ● ● 03.400.063.x 1 unit
983 9 ● ● 03.400.059.x 1 unit
583 5 ● ● 03.400.055.x 1 unit
1733 ● 16 ● ● with switch 03.402.066.x 1 unit
1333 ● 12 ● ● with switch 03.402.062.x 1 unit
933 ● 8 ● ● with switch 03.402.058.x 1 unit
533 ● 4 ● ● with switch 03.402.054.x 1 unit
7.25
S O C K E T S T R I P S
DOS20025
L
DOS20023
DOS20024
L
DOS20022
With switch
With switch
Without switch
Without switch
- Optionally with lit switch,2-pole switching
- 19” Installation option(with length 483 mm)
- 2 Versions: Standard side panel or Designside panel
- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationFinal digit of order number .1:RAL 7035, light-greyFinal digit of order number .6:Enclosure, RAL 2003, pastel orangePlastic parts: RAL 7035, light-grey
Load rating250 VAC/16 A
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DI-STRIP CompactStandard CEE 7 V (UTE) / France
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
Replace .x with the number of the required colour combination:.1 = RAL 7035, .6 = RAL 7035/RAL 2003
L S n F1 F2 19” Safe Model Order no. UP
883 15 ● ● 03.400.015.x 1 unit
732 11 ● ● 03.400.111.x 1 unit
683 11 ● ● 03.400.011.x 1 unit
532 7 ● ● 03.400.107.x 1 unit
483 7 ● ● ● 03.400.007.x 1 unit
382 4 ● ● 03.400.104.x 1 unit
333 4 ● ● 03.400.004.x 1 unit
883 ● 14 ● ● with switch 03.402.014.x 1 unit
732 ● 10 ● ● with switch 03.402.110.x 1 unit
683 ● 10 ● ● with switch 03.402.010.x 1 unit
532 ● 6 ● ● with switch 03.402.106.x 1 unit
483 ● 6 ● ● ● with switch 03.402.006.x 1 unit
382 ● 3 ● ● with switch 03.402.103.x 1 unit
333 ● 3 ● ● with switch 03.402.003.x 1 unit
S O C K E T S T R I P S
7.26
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
DI-STRIP Protector FIStandard CEE 7 V (UTE) / France
Protector FIRCCB for user protection- Prevents electrical and fire accidents
with safe and rapid switching off- Activates with fault current, e.g. acci-
dental contact of mains voltage-carryingparts with defective insulation
- Residual operating current I� = 10mAfor alternating and intermittent faultdirect current
- Reaction time 10 - 30 ms
- 19” Installation option (with length 483 mm)- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 78 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationFinal digit of order number .1:RAL 7035, light-greyPlastic parts: RAL 7035, light-grey
Load rating250 VAC/16 A
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DI-STRIP Protector LSStandard CEE 7 V (UTE) / France
Protector circuit breaker- Circuit breaker for overload and short
circuit- Protects cables and feeds with rapid
switching off with short circuit anddefined delayed cutoff with overload
- Circuit breaker: 16 A- Tripping chatacteristic, type B, 2-pole
- 19” Installation option (with length 483 mm)- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 78 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationFinal digit of order number .1:RAL 7035, light-greyPlastic parts: RAL 7035, light-grey
Load rating250 VAC/16 A
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DOS20026
DOS20026
L S n F1 F2 19” Safe Model Order no. UP
883 13 ● ● 03.404.013.1 1 unit
683 9 ● ● 03.404.009.1 1 unit
483 5 ● ● ● 03.404.005.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
883 13 ● ● 03.408.013.1 1 unit
683 9 ● ● 03.408.009.1 1 unit
483 5 ● ● ● 03.408.005.1 1 unit
7.27
S O C K E T S T R I P S
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
DI-STRIP Protector FI / LSStandard CEE 7 V (UTE) / France
Protector FI / LS- RCCB and circuit breaker- Provides a combination of user, overload
and short circuit protection- Residual operating current I� = 30 mA
for alternating and intermittent faultdirect current
- Circuit breaker 16 A- Tripping characteristic type B, 2-pole- 19” Installation option
(with length 483 mm)- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2- Moulded right angle plug
Material / FinishCasing: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 78 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationFinal digit of order number .1:RAL 7035, light-greyPlastic parts: RAL 7035, light-grey
Load rating250 VAC/16 A
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DI-STRIP Protector Emergency STOPStandard CEE 7 V (UTE) / France
- With 2-pole emergency stop switch for userprotection
- For protecting operating personnel- For manual emergency switch-off
of connected equipment- Phase and neutral conductors are safely
separated- Switch must be specifically unlocked to
restart- 19” Installation option
(with length 483 mm)- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: Classic: 100 mm,Compact: 50 mmHeight: 101 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationFinal digit of order number .1:RAL 7035, light-greyPlastic parts: RAL 7035, light-grey
Load rating250 VAC/16 A
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DOS 20026
DOS20027
DOS20028
Classic withemergency stop
switch
Compact withemergency stop
switch
L S n F1 F2 19” Safe Model Order no. UP
883 13 ● ● 03.410.013.1 1 unit
683 9 ● ● 03.410.009.1 1 unit
483 5 ● ● ● 03.410.005.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
683 10 ● ● Compact 03.426.010.1 1 unit
483 6 ● ● ● Compact 03.426.006.1 1 unit
1333 12 ● ● Classic 03.426.062.1 1 unit
933 8 ● ● Classic 03.426.058.1 1 unit
S O C K E T S T R I P S
7.28
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
Replace .x with the number of the required colour combination:.1 = RAL 7035, .6 = RAL 7035/RAL 2003
DI-STRIP Protector Emergency Stop FI / LSStandard CEE 7 V (UTE) / France
- With 2-pole emergency stop switch for userprotection
- For protecting operating personnel- For manual emergency switch-off
of connected equipment- Phase and neutral conductors are safely
separated- Switch must be specifically unlocked to
restart- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing:Compact: 50 mmHeight: 101 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationFinal digit of order number .1:RAL 7035, light-greyPlastic parts: RAL 7035, light-grey
Additional:With 2-pole fault current switch andcircuit breakerProvides a combination of user, overloadand short circuit protection
Load rating250 VAC/16 A
Supply schedule1 Socket strip2 Mounting brackets
DI-STRIP Power CleanerStandard CEE 7 V (UTE) / France
- With integrated mains filter- The integrated mains filter prevents,
- high frequency disturbances from themains affecting electronic equipment.- the transmission of disturbances from
the equipment to the mains.- The mains filter meets the requirements of
VDE 0565-3 and EN 133200.- 19” Installation option
(with length 483 mm)- Socket rotation: 45°- Cable : H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationFinal digit of order number .1:RAL 7035, light-greyFinal digit of order number .6:Casing, RAL 2003, pastel orangePlastic parts: RAL 7035, light-grey
Load rating250 VAC/16 A
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DOS20029
DOS20030
With emergency Off switchand FI-/ LS circuit breaker
With mains filter
L S n F1 F2 19” Safe Model Order no. UP
683 8 ● ● 03.428.008.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
883 13 ● ● 03.412.013.x 1 unit
683 9 ● ● 03.412.009.x 1 unit
483 5 ● ● ● 03.412.005.x 1 unit
7.29
S O C K E T S T R I P S
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
Replace .x with the number of the required colour combination:.1 = RAL 7035, .6 = RAL 7035/RAL 2003
DI-STRIP Safety BasicStandard CEE 7 V (UTE) / France
- With overvoltage protection- A combination of varistors and gas discharge
arresters guarantee a rapid response andhigh discharge capacity
- Simple but effective protection against indi-rect strikes and voltage spikes from themains
- Double protection:- 1. Up to max. surge current resistance,
transient overvoltages are reduced tonon-damaging values
- 2. If the surge current resistance is excee-ded, the connected equipment is separatedfrom the mains to protect against furtherovervoltage spikes (the green function dis-play goes off). The protection module mustthen be changed for further use.To increase the protection function, a coarsefilter should be switched in advance in thebuilding installation.
- 19” Installation option(with length 483 mm)
- 2 Versions: Standard side panel or Designside panel
- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationFinal digit of order number .1:RAL 7035, light-greyFinal digit of order number .6:Casing, RAL 2003, pastel orangePlastic parts: RAL 7035, light-grey
Technical dataMains voltage 230 VAC +/- 10 %Nominal current 16AFeature class: D (refined protection inaccordance with DIN VDE 0675)Surge current resistance (8/20 µs wave):max. 10 kAProtection level (1.5/50 µs wave): ‹ 1200 V(L/N against PE)
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DOS20032
DOS20031
L S n F1 F2 19” Safe Model Order no. UP
732 10 ● ● 03.416.110.x 1 unit
683 10 ● ● 03.416.010.x 1 unit
532 6 ● ● 03.416.106.x 1 unit
483 6 ● ● ● 03.416.006.x 1 unit
432 4 ● ● 03.416.104.x 1 unit
383 4 ● ● 03.416.004.x 1 unit
S O C K E T S T R I P S
7.30
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
Replace .x with the number of the required colour combination:.1 = RAL 7035, .6 = RAL 7035/RAL 2003
DI-STRIP Safety StandardStandard CEE 7 V (UTE) / France
- With overvoltage protection- With integrated mains filter- With lit switch, 2-pole switching- A combination of varistors and gas discharge
arresters guarantee a rapid response andhigh discharge capacity
- Simple but effective protection againstindirect strikes and voltage spikes from themains and high frequency disturbancesignals
- Overvoltage protection:- 1. Up to max. surge current resistance,
transient overvoltages are reduced tonon-damaging values
- 2. If the surge current resistance is excee-ded, the connected equipment is separatedfrom the mains to protect against furtherovervoltage spikes (the green functiondisplay goes off). The protection modulemust then be changed for further use.To increase the protection function, a coarsefilter should be switched in advance in thebuilding installation.
- Mains filter:- High-frequency disturbance signals are
effectively eliminated by the low-passmains filter
- 19” Installation option(with length 483 mm)
- 2 Versions: Standard or design side- Socket rotation: 45°- Cable: HO5 VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationFinal digit of order number .1:RAL 7035, light-greyFinal digit of order number .6:Casing, RAL 2003, pastel orangePlastic parts: RAL 7035, light-grey
Technical dataMains voltage 230 VAC +/- 10 %Nominal current 16AFeature class: D (refined protection inaccordance with DIN VDE 0675)Surge current resistance (8/20 µs wave):max. 10 kAProtection level (1.5/50 µs wave): ‹ 1200 V(L/N against PE)Mains filter (high-stop): attenuation at1MHz - › 45 dB
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DOS20034
DOS20033 With overvoltage protectionand mains filter
With overvoltage protectionand mains filter
L S n F1 F2 19” Safe Model Order no. UP
883 ● 13 ● ● with switch 03.418.013.x 1 unit
732 ● 9 ● ● with switch 03.418.109.x 1 unit
683 ● 9 ● ● with switch 03.418.009.x 1 unit
532 ● 5 ● ● with switch 03.418.105.x 1 unit
483 ● 5 ● ● ● with switch 03.418.005.x 1 unit
7.31
S O C K E T S T R I P S
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
DI-STRIP Master-SlaveStandard CEE 7 V (UTE) / France
- If the master equipment is switched, theslave sockets are also switched (together,with a short delay to the master). Enableseasy switching on and off of several difficultto access pieces of equipment. Switchingthresholds can be set from outside viapotentiometer.
- Note:- Power consumption of the master-
equipment must be constantly over theswitching on threshold. When switching offthe master consumer, the power con-sumption must fall below the switch-offthreshold.
- 19” Installation option(with length 483 mm)
- Socket rotation: 45°- Cable: HO5VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationFinal digit of order number .1:RAL 7035, light-greyPlastic parts: RAL 7035, light-grey
Load rating250 VAC/16 A
Technical dataThreshold setting rangeOn: 20 mA - 200 mA (approx. 55 mA,supply status)Off: 16 mA - 160 mA (approx. 44 mA,supply status)Switching delay 550 ms +/- 20%Electronic module, 2-pole switching
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DOS20035 With master-slave module
L S n F1 F2 19” Safe Model Order no. UP
683 9 ● ● 03.414.009.1 1 unit
483 5 ● ● ● 03.414.005.1 1 unit
S O C K E T S T R I P S
7.32
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
DI-STRIP CombiStandard CEE 7 V (UTE) / France
- Master-slave with overvoltage protectionand mains filter
- Automatic switching of equipment withintegrated overvoltage protection and mainsfilter
- Joins functions of the master-slave (page 7.31) and the safety standard (page 7.30)
- Socket rotation: 45°- Cable: H05VV-F 3 G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationFinal digit of order number .1:RAL 7035, light-greyPlastic parts: RAL 7035, light-grey
Technical dataOvervoltage protection and mains filter:Mains voltage: 230 VAC +/- 10 %Nominal current 16AFeature class: D (refined protection inaccordance with DIN VDE 0675)Surge current resistance (8/20 µs wave):max. 10 kAProtection level (1.5/50 µs wave):‹ 1500 V (L + N against PE)Mains filter (low-pass): attenuation at1MHz - › 45 dBMaster-slave function:Threshold setting rangeOn: 20 mA - 200 mA (approx. 55 mA,supply status)Off: 16 mA - 160 mA (approx. 44 mA,supply status)Switching delay 550 ms +/- 20%Electronic module, 2-pole switching
Supply schedule1 Socket strip2 Mounting brackets
DOS20037
DOS20036
With master-slave,overvoltage protection
and mains filter
With master-slave,overvoltage protection
and mains filter
L S n F1 F2 19” Safe Model Order no. UP
782 9 ● ● 03.420.109.1 1 unit
733 9 ● ● 03.420.009.1 1 unit
582 5 ● ● 03.420.105.1 1 unit
533 5 ● ● 03.420.005.1 1 unit
7.33
S O C K E T S T R I P S
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
DI-STRIP Compact GST 18 Plug System (Wieland)Standard CEE 7 V (UTE) / France
- Quick and efficient plug connection system- Plug-in electro-installation in place of
conventional wiring- Speed:
- Due to simple plugging together ofpreconfigured elements
- Flexibility:- Due to cable (cable length)
- Efficient:- Easy exchange of socket strips, without
cabling expenses- Safety:
- Due to plug system, all faulty installationsare excluded
- Space-saving:- Use of protection and switching functions
can be extended to additional socket stripswith no loss of plugging space by extend-ing cable (maximum load rating of 16 A)
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brass
DimensionsSocket spacing: 50 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationFinal digit of order number .1:RAL 7035, light-greyPlastic parts: RAL 7035, light-grey
Load rating250 VAC/16 A
Supply schedule1 Socket strip2 Mounting brackets
DOS20048
DOS20047
DOS20051
DOS20052
DOS20054
DI-STRIP Safety BasicWith GST 18 plug system / France
- With overvoltage protection- Technical description, see page 7.29
DI-STRIP Safety StandardWith GST18 plug system
- With overvoltage protection, with integratedmains filter and lit switch
- Technical description, see page 7.30
DI-STRIP Master SlaveWith GST18 plug system
- Technical description, see page 7.31
GST 18 with switch
GST 18 without switch
L S n F1 F2 19” Safe Model Order no. UP
583 ● 6 ● ● with switch 03.402.206.1 1 unit
433 ● 3 ● ● with switch 03.402.203.1 1 unit
533 7 ● ● 03.400.207.1 1 unit
383 4 ● ● 03.400.204.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
433 4 ● 03.416.204.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
583 5 ● 03.418.205.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
533 5 ● 03.414.205.1 1 unit
S O C K E T S T R I P S
7.34
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
Power Supply CableFor GST18 plug system
- Mains plug CEE/VII - GST18 socket (Wieland)- Cable: HO5VV-F 3G 1.5 mm2
ColourWhite
Connection CableFor GST18 plug system
- GST18 plug - GST 18 socket- Cable: HO5VV-F 3G 1.5 mm2
ColourWhite
GST18 Socket PartInput
- With screw terminal for cross-section1.5-2.5 mm2 with cable strain relief
- For individual, customer-side connection
ColourWhite
- With screw terminal for cross-section1.5-2.5 mm2 with cable strain relief
- For individual, customer-side connection
ColourWhite
GST18 Plug PartOutput
L S n F1 F2 19” Safe Model Order no. UP
2000 04.000.040.0 1 unit
5000 04.000.041.0 1 unit
L S n F1 F2 19” Safe Model Order no. UP
1000 04.000.044.0 1 unit
5000 04.000.045.0 1 unit
L S n F1 F2 19” Safe Model Order no. UP
04.000.046.0 1 unit
L S n F1 F2 19” Safe Model Order no. UP
04.000.047.0 1 unit
DOS00467
DOS00469
DOS00471
DOS00470
For more GST18 accessories see page 7.20
7.35
S O C K E T S T R I P S
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
Replace .x with the number of the required colour combination:.1 = RAL 7035, .6 = RAL 7035/RAL 2003
DI-STRIP ClassicStandard CH SEV 1011
- With/without switch, socket spacing,100 mm
- Optionally with lit switch,2-pole switching
- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2
- Moulded plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 100 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationFinal digit of order number .1:RAL 7035, light-greyFinal digit of order number .6:Enclosure, RAL 2003, pastel orangePlastic parts: RAL 7035, light-grey
Load rating250 VAC/10 A
Supply schedule1 Socket strip2 Mounting brackets
DOS00717
DOS00664
DOS00665
Classic with switch
Classic without switchL S n F1 F2 19” Safe Model Order no. UP
1783 17 ● 03.700.067.x 1 unit
1383 13 ● 03.700.063.x 1 unit
983 9 ● 03.700.059.x 1 unit
583 5 ● 03.700.055.x 1 unit
1733 ● 16 ● with switch 03.702.066.x 1 unit
1333 ● 12 ● with switch 03.702.062.x 1 unit
933 ● 8 ● with switch 03.702.058.x 1 unit
533 ● 4 ● with switch 03.702.054.x 1 unit
S O C K E T S T R I P S
7.36
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
DI-STRIP CompactStandard CH SEV 1011
- Optionally with lit switch,2-pole switching
- 19” Installation option(with length 483 mm)
- 2 Versions, standard side or design side- Socket rotation: 45º- Cable: H05VV-F 3G 1.5 mm2
- Moulded plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationFinal digit of order number .1:RAL 7035, light-greyPlastic parts: RAL 7035, light-grey
Load rating250 VAC/10 A
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DOS20074
DOS20039
DOS00666
DOS00667
DOS20038
L S n F1 F2 19” Safe Model Order no. UP
883 15 ● 03.700.015.1 1 unit
732 11 ● 03.700.111.1 1 unit
683 11 ● 03.700.011.1 1 unit
532 7 ● 03.700.107.1 1 unit
483 7 ● ● 03.700.007.1 1 unit
382 4 ● 03.700.104.1 1 unit
333 4 ● 03.700.004.1 1 unit
732 ● 10 ● with switch 03.702.110.1 1 unit
683 ● 10 ● with switch 03.702.010.1 1 unit
532 ● 6 ● with switch 03.702.106.1 1 unit
483 ● 6 ● ● with switch 03.702.006.1 1 unit
382 ● 3 ● with switch 03.702.103.1 1 unit
333 ● 3 ● with switch 03.702.003.1 1 unit
7.37
S O C K E T S T R I P S
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
DI-STRIP Protector FI/LSStandard CH SEV 1011
Protector FI / LS- RCCB and circuit breaker- Provides a combination of user, overload
and short circuit protection- Residual operating current I� = 30 mA
for alternating and intermittent faultdirect current
- Circuit breaker 10 A- Tripping characteristic type B, 2-pole
- 19” Installation option (with length 483 mm)- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 78 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationFinal digit of order number .1:RAL 7035, light-greyPlastic parts: RAL 7035, light-grey
Load rating250 VAC/10 A
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DI-STRIP Safety StandardStandard CH SEV 1011
- With overvoltage protection and integratedmains filter
- With lit switch,2-pole switching
- 19” Installation option (with length 483 mm)- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm2
- Moulded plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 50 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 mm
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWG
Colour combinationFinal digit of order number .1:RAL 7035, light-greyPlastic parts: RAL 7035 light-grey
Description and technical dataSee page 5.41
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DOS00719
DOS00668
DOS00720
DOS00669 With overvoltage protec-tion and mains filter
L S n F1 F2 19” Safe Model Order no. UP
683 9 ● 03.710.009.1 1 unit
483 5 ● ● 03.710.005.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
683 ● 9 ● with switch 03.718.009.1 1 unit
483 ● 5 ● ● with switch 03.718.005.1 1 unit
S O C K E T S T R I P S
7.38
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
DI-STRIP ClassicStandard USA NEMA5
- With lit switch- With overload protection 15A- Cable: SJT 14 AWG x 3C- Moulded plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclable
DimensionsSocket spacing: 100 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 5 m
ApprovalsCE / CSA C / CSA US
ColourEnclosure: RAL 7035 light-greyPlastic parts: RAL 7021, dark-greySocket parts and cable: RAL 9011,graphite black
Load rating125 VAC/15 AMains frequency 60Hz
Supply schedule1 Socket strip2 Mounting brackets
DOS00670 With switch
L S n F1 F2 19” Safe Model Order no. UP
1383 ● 12 ● with switch 03.532.062.1 1 unit
DI-STRIP CompactStandard USA NEMA5
- With lit switch- With overload protection 15A- 19” Installation option (with length 483 mm)- Cable: SJT 14 AWG x 3C- Moulded plug
Material / FinishEnclosure: closed sheet-steel extrusion, zinc-passivated, powder-coated texturePlastic parts: polyamide PA6 (UL 94 V0), recyclable
DimensionsSocket spacing: 32 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE / CSA C / CSA US
ColourEnclosure: RAL 7035 light-greyPlastic parts: RAL 7021, dark-greySocket parts and cable: RAL 9011,graphite black
Load rating125 VAC/15 AMains frequency 60Hz
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
(additional with 19” installation option)
DOS20016 With switch
L S n F1 F2 19” Safe Model Order no. UP
483 ● 9 ● ● with switch 03.532.009.1 1 unit
383 ● 6 ● with switch 03.532.006.1 1 unit
DOS00685
DOS00686
7.39
S O C K E T S T R I P S
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
DI-STRIP Surge ProtectorStandard USA NEMA5
- With lit switch- With overload protection 15A- With overvoltage protection- 19” Installation option- Cable: SJT 14 AWG x 3C- Moulded plug
Material / FinishEnclosure: closed sheet steel extrusion,zinc-passivated, powder-coated texturePlastic parts: polyamide PA 6 (UL 94 V0),recyclable
DimensionsSocket spacing: 32 mmHeight: 45.5 mmCasing width: 44.4 mm (= 1 HU)Cable: 2.5 m
ApprovalsCE / CSA C / CSA US
ColourEnclosure: RAL 7035 light-greyPlastic parts: RAL 7021, dark-greySocket parts and cable: RAL 9011,graphite black
Technical dataMains voltage 125 VACNominal current 15AMains frequency 60HzSurge current resistance (8/20 µs wave):max. 13 kAProtection level (1.5/50 µs wave): ‹ 400V(measured according to UL1449)
Supply schedule1 Socket strip2 Mounting brackets2 19” Mounting brackets
DOS20017 With overvoltage protection
L S n F1 F2 19” Safe Model Order no. UP
483 ● 6 ● ● with switch 03.534.006.1 1 unit
DOS00687
See also: the current
Telecom Special Catalogue!Where you will find more products:
• Indoor 19” rack systems
• Outdoor 19” rack systems
• Free-standing and wall cabinets
• Power supply systems
• Thermal management
S O C K E T S T R I P S
7.40
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
Serimat Classic
- Optionally with lit switch,2-pole switching
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: robust, double-panelled sheetsteel casing, powder-coated texture
DimensionsSocket spacing: 100 mmHeight: 45 mmCasing width: 51 mmCable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWGVDE Certificate
ColourRAL 2003, pastel orange
Load rating250 VAC/16A
Supply schedule1 Socket strip
Serimat Compact
- Optionally with lit switch,2-pole switching
- Socket rotation: 30°- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishEnclosure: robust, double-panelled sheetsteel casing, powder-coated texturePlastic parts: polyamide PA 6, recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 60 mmHeight: 45 mmCasing width: 51 mmCable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWGVDE Certificate
ColourRAL 2003, pastel orange
Load rating250 VAC/16A
Supply schedule1 Socket strip
DOS20063
51
L
100
5
14
6
DOS00509
DOS20077
5
6
14
L
65
51
DOS00511 With lit switch
5
51
6
14
L
65
DOS00510 Without switch
Without switch
L S n F1 F2 19” Safe Model Order no. UP
563 5 ● 03.002.305.2 1 unit
963 9 ● 03.002.309.2 1 unit
1363 13 ● 03.002.313.2 1 unit
1763 17 ● 03.002.317.2 1 unit
543 ● 4 ● with switch 03.000.304.2 1 unit
943 ● 8 ● with switch 03.000.308.2 1 unit
1343 ● 12 ● with switch 03.000.312.2 1 unit
1743 ● 16 ● with switch 03.000.316.2 1 unit
L S n F1 F2 19” Safe Model Order no. UP
278 3 ● 03.002.333.2 1 unit
408 5 ● 03.002.335.2 1 unit
668 9 ● 03.002.339.2 1 unit
928 13 ● 03.002.343.2 1 unit
408 ● 4 ● with switch 03.000.334.2 1 unit
668 ● 8 ● with switch 03.000.338.2 1 unit
928 ● 12 ● with switch 03.000.342.2 1 unit
7.41
S O C K E T S T R I P S
Dimensions in mm:L = Length, S = Switch, n = Number of sockets,F1 = Standard side piece, F2 = Design side piece,19” = Suitable for 19” installation, Safe = Child-safeHU = Standard height unit, UP = Unit of packaging
Serimat Classic Black Line
- Optionally with lit switch,2-pole switching
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / FinishRobust extruded aluminium enclosure,powder-coated, smoothPlastic parts: polyamide PA 6, recyclableInternal conductor: full-length busbar,brassCable: PVC
DimensionsSocket spacing: 85 mmHeight: 46 mmCasing width: 60 mmCable: 2.5 m
ApprovalsCE Label in accordance with the lowvoltage guideline 73/23/EWG,EMC guideline 89/336/EWGVDE Certificate
ColourRAL 9011, graphite black
Load rating250 VAC/16A
Supply schedule1 Socket strip
DOS20064
DOS20055
L S n F1 F2 19” Safe Model Order no. UP
361 4 ● 03.009.004.2 1 unit
446 5 ● 03.009.005.2 1 unit
531 6 ● 03.009.006.2 1 unit
616 7 ● 03.009.007.2 1 unit
361 ● 3 ● with switch 03.009.013.2 1 unit
446 ● 4 ● with switch 03.009.014.2 1 unit
531 ● 5 ● with switch 03.009.015.2 1 unit
616 ● 6 ● with switch 03.009.016.2 1 unit
E X P R E S S I T E M
Rapid Service
Express itemSwift express delivery service,smooth ordering process,attractive pricing and a market-oriented offer – that’s Knürrreliability!
Each express item that ismarked accordingly in thiscatalogue, leaves ourEuropean central store24 hours after your order isreceived. High-grade qualityand standardised solutionsthat always leave you thatdecisive step ahead of thecompetition!
Global sales offices whereexpert application techniciansand sales engineers specifi-cally apply themselves to yourspecial requirements andpersonally advise you are alsoavailable for you around theworld.Don’t hesitate in using themto your advantage!
Express itemin 24 hours ex plant:
With Knürr you arealways ahead
of the competition
8UPSUninterruptiblePower Supplies 8.2 to 8.14
8.1
U P S
Uninterruptible
Power Supplies
UPSStrong points 8.2
Pulsar EvolutionLine Interactive 8.5
Pulsar EXtreme COnline 8.7
Pulsar EXtreme Online 8.11
SafetyHigh-grade online and line-interactive technology guaranteessafe and uninterruptible operationof your systems.
EfficiencyThe 19” modules provide highperformance on minimuminstallation space with compactconstruction and modular setup.
Investment securityOur solutions grow with yourrequirements, can be flexiblyused and are easily expanded.
ModularityThe individual components of thisrange can be combined accordingto requirements and consequent-ly produce specifically definedsolutions.
User-friendlinessComprehensive displays andinteractive interfaces for externalevaluation of status messagesprovide the user with currentsystem information at all times.
Highest possible protectionOnline UPS systems provide thehighest possible protectionagainst the 10 most frequentmains disturbances.
Uninterruptible Power SuppliesStrong points
U P S
8.2
NoteYou will find more information on UPS at: www.knuerr-usv.de
UPS by KnürrTower Solutions • 19” Chassis • Large Scale Systems
UPS by KnürrThe right technical solution for every requirement.
USV20257
8.3
U P S
The line-interactive UPS model usesa power inverter in inverter in inverseoperation to recharge the batterywith stable mains supply.If the mains power supply fails, thenthe working direction changes andthe battery powers the inverter.Because the converter constantlymonitors the mains input, it canreact quicker to failures and correctvoltage breaks.The inverter preconnected by theconsumer has a specific filteringeffect against mains disturbances.This technology is highly recommend-able for uninterruptible power sup-plies for many applications, particu-larly with regard to PC requirements.
Line-Interactive / Pulsar EvolutionIEC 62040-3 VI-SS-313
~=
FilterInput
Output
Electronic switch
Converter
Battery
Online UPS systems have theadvantage of effectively filtering outspikes and drop outs by convertingalternating voltage into direct vol-tage and back into alternating vol-tage.
Our Online UPS systems are seriesequipped with interfaces so thatunattended computers can be spe-cifically powered down automaticallyand powered up again after themains supply has returned.
If faults occur in the system itselfdue to battery ageing processes, anautomatic by-pass switch ensuresbridging and direct connection to themains without interruption.The user is acoustically and opticallyinformed about defective functionsand power failures.
The battery takes over from therectifier without interruption whenthere is a mains failure and providesthe necessary energy for a specificperiod of time.Online systems provide high levelsof security and are particularlyrecommended for high-grade andsensitive consumers.
Online / Pulsar EXtreme CIEC 62040-3 VFI-SS-111
Input
Output
Automatic bypass
Inverter
Battery
Filter~=~ =
Rectifier
Filter
U P S
8.4
The battery takes over from therectifier without interruption whenthere is a mains failure and providesthe necessary power for a specificperiod of time.Online systems provide high levelsof security and are particularlyrecommended for high-grade andsensitive consumers.Online UPS systems have theadvantage of effectively filtering outspikes and drop outs by convertingalternating voltage into directvoltage and back into alternatingvoltage.Our Online UPS systems are seriesequipped with interfaces so thatunattended computers can bespecifically powered down automati-cally and powered up again after themains supply has returned.If faults occur in the system itselfdue to battery ageing processes, anautomatic by-pass switch ensuresbridging and direct connection to themains without interruption.The user is acoustically and opticallyinformed about defective functionsand power failures.
Hot-Swap FunctionPulsar EXtreme enables UPSmaintenance, repair and ex-change, as well as battery swapduring running operation withoutany impairment or interruptionto consumer supply.
Online / Pulsar EXtremeIEC 62040-3 VFI-SS-111
Input
Output
Automatic bypass
Inverter
Battery
Filter~=~ =
Rectifier
Filter
Manual bypass / "Hot-Swap"
8.5
U P S
Line Interactive / Pulsar Evolution UPS VI-SS-313800 to 3.000 VA
Compact high-performanceprotection for servers,storage systems and networkequipment
Pulsar Evolution in rack or towerversion provides you with the bestpossible availability for power supply of your systems.
Compact design and best possi-ble flexibility with assembly andinstallation- Ultra-flat rack versions:
only 1 HU from 500 to 1,500 VAonly 2 HU from 2,200 to 3,000VA
- Diverse installations are possi-ble according to the model
Highest availability- Power supply redundancy via
Pulsar STS- Expandable bridging times with
only 2 HU battery modules- HF technology with sine output- Hot-swap batteries
Progressive communication- Standard with USB and serial
interface- SNMP and web-based
remote management- Programmable outputs for
remote and autonomousmanagement
USV20001 Pulsar EvolutionA revolutionary development1500 VA only 1 HU3000 VA only 2 HU
Pulsar Evolution Rack800 / 1100 / 1500
Pulsar Evolution Tower2200 / 3000A model for tower or 19” (2 HU)
USV20002
USV20003
U P S
8.6
Battery charge status
1 Group: 4 output sockets2 Groups of 2 programmableoutputs
Capacity utilisation rate
Complete operation and display panel:- Normal/battery operation- Booster/fader mode- Powershare status outputs- Battery swap-out/fault
Connection forEXB modules
Slot for optional communicationscards
Dataline
protection
Port for automaticbatteryexpansion detection
RS232interface
USBinterface
Logo and battery access
Pulsar Evolution 800 1100 1500 2200 3000Nominal power, VA/W 800/560 1100/700 1500/1000 2200/1540 3000/2000
Model Combi system, Tower/2HU Rack
Installation options Rack version: 19” installation / 1 HU 19” installation with enclosed kit
Tower model with support base
Number of IEC-320 Euro outputs 4 4 4 8 8
of these, powershare outputs 2 2 2 2 x 2 2 x 2
EXB battery expansion modules – – – 1-3 EXB
Key technical dataTechnology High frequency technology, line interactive, VI-SS-313
Automatic voltage regulation Booster/Fader
Output, voltage form SINE
Input voltage tolerance 160V/294V, programmable to 150V/294V
Frequency 50 Hz or 60 Hz, automatic detection of the network frequency
Output voltage with battery operation 230V (programmable to 200/220/240V))
Equipment featuresAutomatic battery test weekly (other intervals can be programmed)
Exchangeable batteries (HOT-SWAP) ◗ ◗ ◗ ◗ ◗
Backup time, 100%/50% load (min.) 5/15 5/15 5/15 5/15 5/15
Backup time with 1* EXB 100%/50% load (min.) - - - 35/90 30/70
Cold start capacity ◗ ◗ ◗ ◗ ◗
Deep-discharge protection ◗ ◗ ◗ ◗ ◗
UPS driver for Windows Programming of threshold value (voltage tolerance, sensitivity, battery test, ON/OFF)
Data line protection RJ45 network protection
Communication/MonitoringCommunication interface 1x USB + 1x RS232 interface (standard)
Communication slot for options 1, for SNMP card or status information
Power management software, SolutionPac Local management and SNMP proxy agents for Windows 2003/XP/2000/NT/98
On CD in the supply schedule Linux, Netware, OpenServer, Unixware, SUN Solaris, IBM AIX, HP UX, Compaq Tue64, etc.
Web-based monitoring XML-@gent
Remote display (option) UPS Control, Remote Message Board
StandardsSafety EN 50091-1-1/EN 60950 (RD), IEC 60950, TÜV, GS
Electro-magnetic compatibility EN 50091-2, EN 50022/B, IEC 62040-2, IEC 61000-3-2, IEC 61000-3-3
Design, production, logistics and service ISO 9001
Certifications CE, TÜV GS
Scope of serviceExtended 3-year guarantee
General data 800 1100 1500 2200 3000
Rack dimensions, W=438xHxD (mm) 44(1HU)x499 44(1HU)x522 88(2HU)x640
Weight (kg) 15.5 16 19 33.9 36.5
EXB module weight – – – 41.9
Accessories included in the supply schedule Removable 19” mounting bracket, universal telescopic slides
For 19” versions Mounting accessories, cable mounting
Order no., UPS 06.100.601.1 06.100.602.1 06.100.603.1 06.100.604.1 06.100.605.1
Order no., EXB battery module 06.100.606.1
Order no., WEB SNMP card 06.100.629.1
Order no., relay card 06.100.627.1
PulsarEvolution3000
Sta
ndar
ds,
sp
ecifi
catio
ns a
nd m
odel
s ch
ange
fro
m t
ime
to t
ime.
Sub
ject
to
tech
nica
l cha
nges
.
Pulsar Evolution features
USV20016
= Express item
8.7
U P S
High performance and reliability
CE and UL certified
Highest availabilityPulsar EXtreme C guaranteesthe highest possible availability(>99.999%) of your system.
Cold start via batteryThis function enables problem-free starting of your applications,even with a mains failure.
Automatic bypassIn the event of an overload or afault, Pulsar EXtreme C switchesthe consumer without interruptionto the mains supply system.
Pulsar EXtreme C provides compre-hensive protection and optimumreliability of your system.
Wide input voltage rangeThe Pulsar EXtreme C’s wideinput voltage range of 120-276 Vreduces switchover and conse-quently the demand on thebatteries. Pulsar EXtreme Coptimises the battery lifespanand only makes demands on thebatteries when this is reallynecessary, with a power failure,for example.
High performance batterycharger modulePulsar EXtreme C chargermodule:- Reduces the battery recharging
time(80% backup time in 2 hours)
- Increases the battery lifespanthrough integration of model-specific battery parameters,environmental temperatureand battery ageing
- Protects the batteries fromdeep discharging
- Integrated power factor-correction, i.e. no systemreaction
- Prevents possible fault effectson the mains feeding (backfeedprotection)
Pulsar EXtreme C UPS / Online VFI-SS-1111000 / 1500 / 2200 / 3200 VA
Pulsar EXtreme CRepresents compact designand optimum protection.
- Reliable high performancetechnology
- Highest availability- Progressive
communication- User-friendliness- Flexible and expandable
Maximum security for your servers,telecommunications and networkcomponents etc., with minimumspace requirements.
USV20018
U P S
8.8
Progressive communication options
Additionalcommunications slotEnables integration of an additionalcommunications circuit board(SNMP, telecommunicationscontacts, etc.). These cards makethe UPS communication totallyindependent. You are, for exam-ple, informed about the UPSstatus after a server shutdown.
Installation and integration- Tower or as 19” version- Complete 19” assembly kit
with telescopic and mountingmaterial
- Quick start instructions- Easy mains connection via
DIN protective contact plug
Display and control componentsFault displays- Overload- UPS fault- Battery fault- Status displays of the pro-
grammable load connectionsno.1 and no. 2
- ON/OFF- % battery backup- Utilization capacity rate display
in %- Lamp test/Buzzer OFF
Manual switchingWR/Bypass
- Operation via bypass- Operation in online mode- Battery operation
3
2Pulsar EXtreme C provides acomplete package of communica-tions solutions for connecting EDPsystems and monitoring.
2 Communications interfacesPulsar EXtreme C is equippedas standard with an RS232 and aUSB port for easy connection ofthe UPS with a server, for, by wayof example:
Individual adaptation of PulsarEXtreme CBy modifying the factory-setparameters (output voltage,battery test intervals, bypassoperation, etc.) via the UPSdriver software.
LAN and WAN management(SNMP/WEB) of the UPS andconnected servers viaSolutionPac.
SolutionPac softwareSolutionPac provides the optionof:- User information- Automatic shutdown of individu-
al or several servers in a heter-ogenous network
- Remote monitoring and man-agement of the UPS
1
USV200041
USV200052
USV200063
USV200073
8.9
U S V
Flexible and expandable
Hot-swap batteryThe user can swap out the bat-tery during running operation, i.e.without switching off the consu-mer.
Individual management of theconsumer connections viapowershareTM
The 2 programmable consumerconnections enable the individualassignment of the backup timeand the remote switch-on and offfor the connected consumer.
6
5Pulsar EXtreme C meets tomorrowsrequirements today!
Backup times ranging from6 minutes to several hoursPulsar EXtreme C is standardequipped with at least 6 minutesbackup time. You can achievehigher operational continuitywith:- Up to 3 EXB battery expansions
that can be added during run-ning operation
- CLA module (high performancecharger) for especially longbackup times, up to 8 hours atfull load.We are readily at your disposalfor detailed information.
4
USV200084
USV200095
USV200196
U P S
8.10
Pulsar EXtreme C features
(1) Values for 50%, 66% and 100% load
Article numbers EXtreme 1000 C EXtreme 1500 C Extreme 2200 C Extreme 3200 CModel UPS EXB UPS EXB UPS EXB UPS EXB
Order no., UPS 06.100.621.1 06.100.624.1 06.100.622.1 06.100.625.1 06.100.590.1 06.100.592.1 06.100.591.1 06.100.592.1
Order no., WEB SNMP card 06.100.629.1 06.100.629.1 06.100.629.1 06.100.629.1
Order no., relay card 06.100.627.1 06.100.627.1 06.100.627.1 06.100.627.1
Pulsar EXtreme 1000 C 1500 C 2200 C 3200 CGeneralNominal power 1000 VA / 700 W 1500 VA / 1050 W 2200 VA / 1540 W 3200 VA / 2080 W
Technology Online, double conversion technology with automatic bypass
Input power range 120/140/160 V* - 276 V 120/140/160 V* -284 V
Input frequency 50/60 Hz, self-detecting, tolerance +/- 10 Hz, can be used as frequency converter
Output voltage/frequency 230V, 200/208/220/230/240V can be set, 50/60Hz +/- 0.5%
Overload capacity 110% - continuous, 130% - 12s, then to bypass, >130% - 1.5s, then to bypass
Battery test Automatic weekly battery test, other intervals can be programmed
Battery management Automatic EXB detection, automatic backup adjustment, deep-discharging protection
Typical backup times with 50% / 70% utilizationPulsar EXtreme C 18 mn / 11 mn 14 mn / 10 mn 17 mn / 12 mn 15 mn / 10 mn
Pulsar EXtreme C + 1 EXB 60 mn / 40 mn 80 mn / 50 mn 85 mn / 60 mn 60 mn / 40 mn
Pulsar EXtreme C +4 EXB 170 mn / 110 mn 210 mn / 135 mn 285 mn / 200 mn 190 mn / 130 mn
ConnectionsInput IEC C14 (10A) IEC C20 (16A)
Output 6 * IEC C13 (10A) 1* IEC C19 (16A)
4* IEC C13 (10A)
Including powershare outputs 2 IEC C13 individually programmable outputs (remote ON/OFF, load dump, sequential start)
Power managementStandard interfaces 1* USB and 1* serial interface
Free slot for SNMP/Web mini-slot card or relay card
Remote off-control Option via relay card Standard
Dimensions (HxWxD in mm) and weights (in kg)
Rack UPS or EXB 88 (2HU) x 482.6 (19”) x 430 88 (2HU) x 482.6 (19”) x 493 EXB : 87.9 (2HU) x 438 (19”) x 632
UPS weight / Rack 16 20 35 36
EXB weight / Rack 21 27.5 42 42
Norms and StandardsCertifications CE / TÜV-GS / CB / UL 1778 / cUL
Performance & Safety IEC/EN 62 040-1, EN 60 950-1 (RD), IEC/EN 62 040-3
Highest UPS protection class: VFI-SS-111 in accordance with EN 62 040-3, VDE 0558 part 530
Electro magnetic compatibility EN 50091-2, IEC 65040-2 class B (also with EXB battery expansions)
= Express item
8.11
U P S
Pulsar EXtreme UPS / Online VFI-SS-1112000 / 3000 VA
Progressive communication- Unsurpassed communications
possibilities- SolutionPac UPS management
software- Parameters via UPS driver
software
User-friendliness- Easiest possible installation
and integration- Practical display and control
field
Flexible and expandable- Hot-swap sockets- Backup times ranging from
10 minutes to 8 hours- ECO mode (level of efficiency,
up to 94%)
Unique - Standard with hot-swapmoduleModular protection for yoursensitive applications, networksand telecommunications systems
Reliable high-performancetechnology- Online double conversion
technology- 84-264 V input voltage, without
battery strain- CE/UL/TÜV GS and ISO 14001
standards
Highest availability- Hot-swap function, exchange
during running operationwithout consumer impairment
- Automatic bypass- Redundancy
USV20010
NoteYou will find more information on UPS at: www.knuerr-usv.de
U P S
8.12
Pulsar EXtreme UPS Systems
High performance and reliability
Online double conversiontechnologyOnly this technology guarantees aconstant, clean output voltageand frequency. A sine-form out-put voltage is always created viathe rectifier and inverter chain,regardless of faults in the mainssupply system. The battery is onlyrequired with mains supplyfailure.
Wide input voltage rangeOptimised input voltage rangereduces switchover and conse-quently the demand on the bat-teries. EXtreme C optimises thebattery lifespan and only makesdemands on the batteries whenthis is really necessary, with apower failure, for example.
CE and UL certified
Highest availability
Hot-swap functionPulsar EXtreme enables UPSmaintenance, repair and ex-change as well as battery swapduring running operation withoutany impairment or interruption toconsumer supply.
Cold start via batteryThis function enables problem-free start of your applications,even with a mains failure.
Automatic bypassIn the event of an overload or afault, Pulsar EXtreme C switchesthe consumer without interruptionto the mains supply system.
Progressive communicationoptions
Pulsar EXtreme C provides acomplete package of communica-tions solutions for connectingEDP systems and electricalsystems.
RS232 interfaceEnables easy connection of UPSwith a server, for example, for:
Individual adaptation of PulsarEXtreme CProvided with modification of thefactory-set parameters (outputvoltage, battery test intervals,bypass operation, etc.) via theUPS driver software.
LAN and WAN management(SNMP/WEB) of the UPS andconnected servers viaSolutionPac.SolutionPac enables individualshutdown of your servers inheterogenous networks.
SolutionPac softwareSolutionPac provides thefollowing options:- User information- Automatic shutdown of individu-
al or several servers in a heter-ogenous network
- Remote monitoring and man-agement of the UPS
Additional communications slotEnables integration of an addi-tionnal communications circuitboard (USB, SNMP, JBus, tele-communications contacts, etc.).These cards make the UPS com-munication totally independent.You are, for example, informedabout the UPS status after aserver shutdown.
7
6
Pulsar EXtreme UPS systems havebeen developed to grow in accord-ance with the requirements of themost modern systems; network,intranet and Internet servers, activecomponents, computer and telecom-munications systems, medical andindustrial applications.
USV200116
USV200127
8.13
U P S
Pulsar EXtreme UPS Systems
Flexible and expandable
Backup times ranging from10 minutes to several hoursPulsar EXtreme is standardequipped with batteries for10 minutes backup time. You canachieve higher operational conti-nuity with:- Up to 2 EXB battery expansions
that can be added during run-ning operation
Hot-swap, the flexibleconnection optionAs socket or fixed installationmodule, each with manualbypass; enables connection orexchange of UPS in just oneminute.
Hot-swap socket module:Plug & Play- Mains connection with DIN
protective contact plug- 4 IEC 320 Euro consumer
sockets, additional clampterminal for users.
3
User-friendliness
Hot-swap for easiest possibleinstallation and integration- 19” version- Comp. 19” assembly kit- Quick start connection of easy
clamp terminal of the hot-swapmodule
- The Pulsar EXtreme 3000 Rackis delivered complete with sup-port rails for 600-900 mm depthracks
Display and control componentsFault displays- Overload- UPS fault- Battery fault- Excess temperature › 40°C- % battery backup- Utilization capacity rate display
in %- Operation via manual bypass- Operation in ECO mode- Operation in online mode- Battery operation- ON/OFF
2
1
USV200131
USV200142
USV200203
U S V
8.14
Pulsar EXtreme Features
(1) Values with 50%, 66% and 100% utilization
GeneralNominal powerInput power rangeFrequency rangeInput power factor (THDI)Output voltage, sineOutput harmonic contentEfficiency level Online mode
ECO modeCrest factorShort circuit current (A)Overload capacity (online mode)
BatteriesStandard backup time with 100% load
with 50% loadEXB battery expansion modules LA
XLA2XLA
Automatic battery test
CommunicationOptions for UPS or MultiSlot module
EnvironmentNoise levelEnvironmental temperature
Conformity with standardsModelSafetyElectro-magnetic compatibility
CertificationsConstruction and production
Dimensions (HxWxD in mm) and weights (in kg)UPS, EXB DimensionsUPS WeightEXB Module, LA WeightEXB Module, XLA Weight
Service
2000VA/1330W 3000VA/2000W84 V/120 V/160 V up to 265 V without battery support (1)
50/60 Hz0.99 (< 5%)
200 V/208 V/220 V/230 V/240 V<3% with linear load, <5% with non-linear load
89% 90%94% 94%3.1 3.127 41
130% for 60s, 160% for 10s, 250% for 1s
9 Minutes 9 Minutes20 Minutes 20 Minutes20 Minutes 20 Minutes36 Minutes 36 Minutes66 Minutes 66 Minutes
Yes, during freely programmable test intervals without risk of a power supply interruption1 RS232/U Talk interface + communications slot
• SNMP 10 BaseT• 2 RS232 U Talk or status information cards
• RS232 or RS485 JBus/ModBus• Relay contacts (250 V, 2 A)
• USB• 2 RS232/COM ports• 2 AS400 interfaces
45 dBA0 to 35°C
EN 50091-3EN 50091-1, IEC 60950
EN 50091-2, EN 55022/B, EN 55011/BIEC 61000-4, IEC 61000-3-2
CE,TÜV/GS, UL, cUL,ISO 9001, ISO 14001
177(4HU)x483x462 (rack)31 (rack) 38 (rack)26 (rack) 32 (rack)41 (rack) 54 (rack)
Extended 3-year guarantee
Pulsar EXtreme 2000 VA 3000 VA
Article numbersOrder no., UPS 06.100.630.1 06.100.631.1
Order no., EXB module, LA 06.100.632.1 06.100.634.1
Order no., EXB module, XLA 06.100.633.1 06.100.635.1
Order no., WEB SNMP card 06.100.639.1 06.100.639.1
Order no., relay card 06.100.637.1 06.100.637.1
9Electro-Mechanical
Components9.2 to 9.5
9.1
E L E C T R O - M E C H A N I C A L C O M P O N E N T S
Electro-Mechanical
Components
Distribution Box 9.2Rack Lighting 9.3Door Contact Switch 9.4Cable Junction Box 9.4Equipotential Bonding Bar 9.5Earthing Bar 9.5Contact Clamp 9.5
9.2
E L E C T R O - M E C H A N I C A L C O M P O N E N T S
Distribution Box
W H D Model Order no. UP
19” 3 HU 150 mm Pull-out 03.013.385.1 1 unit
19” 3 HU 158 mm Fixed installation 03.013.470.1 1 unit
- For mounting DIN rail components of theinstallation technology, such as fuses,clamps, relays etc.
- In the built-in status, the mounting level canbe pulled out at the front, locked in position,and as a result, significantly simplifies thewiring of the individual componentsNot with “fixed installation” versionOn request: Can be delivered ready equippedand wiredOther variations and versions on request
- Installation space for up to 22 pieces ofequipment with 18 mm width each
- Mounting of the TS35 DIN rail on severallevels with simple plug-in connectionNot with “fixed installation” version
- “Snap-in” mounting of DIN rail components
- Easy access to the protective earth andneutral conductor rails from the front
- Various positioning options prepared for Nand PE railsNot with "fixed installation” version
- Cable entry at the rear via double brushstrip (optionally via bushing sockets)
- Cable strain relief on the inside and there-fore accessible from the front
- Labelling strips on the front, above andbelow the installation space
- Installation options for power distributionwith 230 V AC, but also in the low voltagerange (e.g. 48 V DC)
- 19” Chassis, 3 HU, depth 150 mm
Material / Finish- Covers, powder-coated texture,
RAL 7035 light-grey- Main unit, sheet steel, zinc-passivated
Supply schedule1 Distribution boxIncluding N and PE rails, cable entry,cable strain relief, empty panel coversand earth set
How suppliedFully assembled
HEI00379
HEI20282
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
9.3
E L E C T R O - M E C H A N I C A L C O M P O N E N T S
W H D Model Order no. UP
03.013.386.1 1 unitHEI00234
Cable Ports
Material / FinishSheet steel, zinc-passivated
Supply schedule1 Cable routing board11 Bushing socketsMounting material
Alternative to cable entry via brush strip withmounting of distribution box in open racks.
Compact Rack Lamp
W H D HU/U h d b Model Order no. UP
65 65 365 01.131.465.9 1 unit
ELM00135
FeaturesWith magnetic mountingEnergy-saving lampProtective contact socketOn/off switch3 m power supply cableWith cover panel
ApprovalsVDE, ICE
Protection rating IP20
Technical data- Operating voltage:
230 V / 50-60 Hz- Lighting:
compact fluorescent tube withintegrated starter
- Power consumption11 W =̂ 75 W bulb
- Light intensity:900 Lm
- Interference suppression:in accordance with VDE 0712, IEC 82
- Socket:230 VAC / 16A
- Connections:3-pole screw clamp, 2.5 mm2
with strain relief
Luminestra Rack Lamp
W H D HU/U h d b Model Order no. UP
70 20 555 01.131.227.9 1 unit
ELM00058
- Only for rack type miracel W 700, W 800- Mounting is made on the basic rack above
the vertical extrusions- With 13 watt fluorescent tube- With on/off rocker switch- With 2 m power supply lead and protective
contact plug- Complete with mounting material- Only with 123 mm front jumpering space
ColourWhite
Supply schedule1 Luminestra rack lamp2 Mounting bracketsMounting material
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
9.4
E L E C T R O - M E C H A N I C A L C O M P O N E N T S
Cable Junction Box
W H D HU/U h d b Model Order no. UP
00.078.720.9 1 unit
ELM00033
- For 230V electro-installation on-site- As fixed-location exchange point- Simple and quick mounting- Complete with mounting material
Supply schedule1 Cable junction box1 Mounting bracketMounting material
Door Contact Switch
W H S HU/U h d b Model Order no. UP
01.110.722.9 1 unit
ELM00137
- On/off switch, 4 A, 230 V ~- Activation with opening and closing of the
door
Supply schedule1 Door contact switch (not wired)1 Mounting bracketMounting material
ELM00034
Modular Terminal Boxes
W H S HU/U h d b Model Order no. UP
01.117.521.9 1 unit
ELM00128
- For 230V electro-installation on-site- With series terminal, 8 x 42
- Pg 11/16 entry- IP 54
MaterialHigh-impact, fire-resistant polystyrene
Supply schedule1 Modular terminal box4 Pg compression glands, Pg11
9.5
E L E C T R O - M E C H A N I C A L C O M P O N E N T S
Equipotential Bonding Bar
W H S HU/U h d b Model Order no. UP
01.117.524.3 1 unit
- For central earthing of all protectiveconductors
- With sealing cover- Connection options:- 1 x Round conductor 8-10 mm Ø- 1 x Flat conductor up to 30 mm wide or
round conductor 8-10 mm Ø- 7 x one or several-wire conductors up to
16 mm2 or fine wire conductor up to 10 mm2
MaterialBase and cover, high-impact plasticContact strip, brass, nickel-plated
Supply schedule1 Equipotential bonding bar
ELM00114
Earthing Bar
W H S HU/U h d b Model Order no. UP
24 for doubleprorack 01.240.546.9 1 unit
21 for doubleprorack 01.240.545.9 1 unit
18 for doubleprorack 01.240.544.9 1 unit
15 for doubleprorack 01.240.543.9 1 unit
45 for miracel 01.110.709.9 1 unit
41 for miracel 01.110.708.9 1 unit
12 for miracel 01.110.703.9 1 unit
- For safe earthing and equipotential bondingof equipment and installation components
MaterialElectrolyte copper, 9x9
Supply schedule1 Earthing bar2 BracketsMounting material
Contact Clamp
W H S HU/U h d b Model Order no. UP
01.110.715.9 20 units
DOP20016
- For secure connection of equipment andinstallation components with the earthingbar
- For cables up to 25 mm2
Supply schedule20 Contact clamps
ELM00068
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
E X P R E S S I T E M
Rapid Service
Express itemSwift express delivery service,smooth ordering process,attractive pricing and a market-oriented offer – that’s Knürrreliability!
Each express item that ismarked accordingly in thiscatalogue, leaves ourEuropean central store24 hours after your order isreceived. High-grade qualityand standardised solutionsthat always leave you thatdecisive step ahead of thecompetition!
Global sales offices whereexpert application techniciansand sales engineers specifi-cally apply themselves to yourspecial requirements andpersonally advise you are alsoavailable for you around theworld.Don’t hesitate in using themto your advantage!
Express itemin 24 hours ex plant:
With Knürr you arealways ahead
of the competition
10RMS compact 10.2 to 10.6
@Lock 10.7 to 10.14
KVM 10.15 to 10.40
10.1
A C T I V E C O M P O N E N T S
ActiveComponents
RMS compactStrong points 10.2RMS compact 10.419” Adapter Panel 10.4Sensors 10.5
@LockSolutions 10.6Strong points 10.9@Lock 10.9Access administration 10.10
Combi Lock 10.10
KVMStrong points 10.12KVM Switches 10.13KVM Connection Cable 10.15
KVMSwitchMan 10.13Z-Series 10.16Paragon 10.17KVM Remote Control 10.18
RMS20013
The options for system monitoring were previously limited to activecomponents. With SNMP management systems, parameters such as datavolumes, fault rates, equipment configuration and, of course, downtimes/failure of individual connections or hardware components are all monitored.The causes for downtimes/failures of this kind, however, mostly remainunclear or are only first detected on-site (i.e. in the server or network rack).Observance of the required environmental parameters is extremely impor-tant for fault-free operation of high-grade components. Inadmissiblefluctuations in temperature or humidity are frequently the cause of hard-ware defects. A constant automated monitoring of these parameters istherefore a basic requirement for assurance of proper functioning operability.
With the rack monitoring systems that are available on the market today,these and other values can be recorded, and often directly forwarded to asuperordinate management system.
RMS compactThe safety system fornetwork and server racks,and computer centres
A C T I V E C O M P O N E N T S
10.2
Recording of conditions alone is, however, often not sufficient to avertdamages, as the time from occurrence of a critical condition until introduc-tion of countermeasures can often be “tight”, especially with larger networkenvironments. In such cases it is very helpful if the monitoring system canautomatically perform actions (e.g. activate additional fans); the equipmentshould at least be able to immediately send a message (trap) to the man-agement system when defined results emerge, and the management systemwill then send a message to the corresponding network supporter perSNMP trap, e-mail or pager. This enables sufficiently short reaction timesand rapid fault localisation and clearance. With the option of connectingadditional sensors to the monitoring system, such as smoke detectors, doorcontacts, shock sensors, etc., not only racks, but also complete rooms orbuilding sections can be monitored. All relevant environmental parametersof a computer centre can consequently be recorded and evaluated in an easyand straightforward way.
Please address any questions to: [email protected]
10.3
A C T I V E C O M P O N E N T S
The main functions of a modernrack monitoring system are:
• Guaranteeing fault-free operation• Early detection of fault influences• Logging of events - simplification of service work
with automatic monitoring• Activation of countermeasures in the event of a fault• Central control of consumption material statuses (filters, fill levels,
meter readings, inspection intervals, etc.)
A C T I V E C O M P O N E N T S
10.4
RMS20013
Description- Compact design - Zero unit solution
(to mount outside the 19” installationspace)
- 19” Installation with 1HU adapter frontpanel (optional)
- Safe clamping of all connected cableswith integrated cable clamping bracket
- Cost-effective tidy installation with Plug& Play concept
- Convenient cabling with plug-incontacts
- TCP/IP connection via Ethernet(10 Base T)
- Configuration via SNMP, Telnet andweb browser
- Serial configuration via terminalemulation (e.g. hyper terminal)
- Telnet and web access are password-protected
- Viewer and configuration software(free of charge in the supply schedule)
- Freely programmable filter system(boolean logic) for implementing allalarm conditions
- Compatible with current networkmanagement systems – HPOpenView,Cabletron Spectrum, Castlerock, IBMNetview, IBM Tivoli, MG-Soft, CompaqInsight Manager, SUN NetManager, etc.
- Sensors for monitoring all currentenvironmental influences (optional)
- Internal power supply for sensorequipment (no additional power supplynecessary)
- Alarm warning via LED, relay or networkmanagement
- Firmware upgrade via serial interfaceor TFTP
- Integration of external equipment viaV.24 possible (on request)
Technical data- 2 Sensor inputs for temperature sen-
sors or temperature/humidity sensors- 8 Digital inputs, can be configured using
software- 8 Outputs, 12 VDC for power supply of
external sensor systems- 3 Digital outputs (relay, max. 5A with
230 VAC)- Power supply: 100 – 240 VAC- Operating voltage: 12VDC
Approvals- CE Label in accordance with low voltage
guideline 73/23/EWG, EMC guideline89/336/EWG
Colour- RAL 7021, dark-grey
Supply schedule1 RMS compact1 Power supply1 Mounting bracket1 Power supply mounting bracket1 Serial cable1 CD ROM (with manual, viewer and
configuration software, MIB file)
How supplied- Flat-packed kit
RMS compact
RMS compact
W H D Model Order no. UP
280 40 140 RMS compact 06.108.100.8 1 set
RMS20015
RMS20014
19” Adapter Front Panel
Description- Enables 19” installation in racks and
enclosures- Prepared for easy and safe mounting
of RMS compact
Material- Sheet steel, 1.5 mm
Finish- Powder-coated, RAL 7021 dark-grey
Supply schedule1 19” Adapter Front Panel, 1 HU
19” Adapter Front Panel
W H D HU Model Order no. UP
19” 44 1 06.108.130.8 1 unit
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
10.5
A C T I V E C O M P O N E N T S
RMS20019 (similar figure)
Temperature/Humidity Sensor
Description- Insensitive to disturbances- No additional power supply required- Standard cable length, 4 m- Recalibration of the sensor not
necessary. Calibration possible viaconfiguration software.
Technical data- Temperature measuring range, 0-60°C- Accuracy: +/- 5%- Humidity measuring range, 30-90%- Accuracy: +/- 5%
Supply schedule1 Sensor with 4 m connection cable1 Mounting kit
Temperature/Humidity Sensor
Model Order no. UP
06.108.112.9 1 unit
RMS20005
Smoke Detector
Description- Optical smoke detector
with VdS approval- For early fire detection with smoke
emission- Power supply provided via RMS compact- Standard cable length, 4 m
Technical data- Operates from -20°C to +75°C
Supply schedule1 Sensor with 4 m connection cable1 Mounting kit
Smoke Detector
W H D Model Order no. UP
Ø 90 75 06.108.111.9 1 unit
RMS20019 (similar figure)
Temperature Sensor
Description- Insensitive to disturbances- No additional power supply required- Standard cable length, 4 m- Recalibration of the sensor not
necessary. Calibration possible viaconfiguration software.
Technical data- Temperature measuring range, 0-60°C- Accuracy: +/- 5%
Supply schedule1 Sensor with 4 m connection cable1 Mounting kit
Temperature sensor
Model Order no. UP
06.108.110.9 1 unit
LUF20069
ECO Temperature Sensor
Description- Insensitive to disturbances- No additional power supply required- Standard cable length, 4 m- Recalibration of the sensor not
necessary. Calibration possible viaconfiguration software.
Technical data- Temperature measuring range, 0-60°C- Accuracy: +/- 5%
Supply schedule1 Sensor with 4 m connection cable1 Mounting kit
W H D HU/U h d kg Model Order no. UP
ECO 06.108.120.9 1 unit
S Y S T E M M O N I T O R I N G
10.6
RMS20031
Water Sensor
Description- Detects presence of water
Technical data- Operating voltage: max. 24 VDC
Supply schedule1 Sensor with 2 m connection cable1 Mounting bracket
W H D HU/U h d kg Model Order no. UP
06.108.117.9 1 unit
RMS20019
Vibration Sensor
Description- Detects vibrations- Theft protection- Reset possible via viewer software
Supply schedule1 Sensor with 4 m connection cable
W H D HU/U h d kg Model Order no. UP
06.108.113.9 1 unit
RMS20032
Passive Infrared Movement Sensor
Description- Room monitoring with the latest
state-of-the-art technology
Technical data- VdS approval: Classes A + B- Volumetric lens
range 2 -16 m
- Long lens range 29 -50 m- Curtain lens range 17 -30 m- Manipulation monitoring- Digital fault evaluation- Corner or wall mounting
Supply schedule1 Sensor with 4 m connection cable1 Mounting kit
W H D HU/U h d kg Model Order no. UP
06.108.114.9 1 unit
RMS20033
AC Voltage Monitoring
Description- Monitors the AC power supply via an
IEC Euro connector- Signals the status via an integrated
signal cable to the RMSCompact
Technical dataMonitored AC voltage: 230 V AC 50/60 HZConnections: IEC plug,
fixed connectioncable
Supply schedule1 Sensor with 4 m data cable1 Mounting kit
W H D HU/U h d kg Model Order no. UP
06.108.122.9 1 unit
RMS20006
Door Contact Sensor
Description- Magnet bridge sensor, works on every
magnetic conductive material(no special mating part required)
- Can also be used for monitoring sidepanels and roof
- Standard cable length, 4 m
Technical data- Operates from -20°C to +70°C- Switching voltage, max. 200 VDC- Switching current, max. 500mA
Supply schedule1 Sensor with 4 m connection cable1 Mounting kit
Door Contact Sensor
W H D Model Order no. UP
06.108.115.9 1 unit
10@Lock 100.8 to 10.14
10.7
1 9 ” R a c k
A C T I V E C O M P O N E N T S
10.8
Unauthorized access- by own employees- by external companies- uncontrolled access- decentralised access authorizations- key problem- loss of key- single key system- many different keys
Problem outline with locking systems
Cylinder lock systems+ Simple technical version+ Cost-effective with individual locking+ No power supply required- Easily duplicated- Replacement (among other factors)
problematic- Code conversion expensive with locking
systems- Key-connected, which means
transferrable with key hand-over (theft)- Logging and monitoring very
expensive/time-consuming
Electronic systems+ Various locking options+ Opening permission possible without
a key being required+ Opening permission can be
granted/withdrawn almost immediately+ Lock control / logging possible+ Remote opening per PC / Internet /
mobile phone / SMS+ Expandable and easy code conversion
lock system- Power supply required
The mechanical/electro-mechanical comparison
MIR20107
Electronic locking systems
Mechanical combination lock
Standard locking with half-cylinder
Locking solutionsControl components to choose from
MIR20113
MIR20134MIR20285
10.9
A C T I V E C O M P O N E N T S
Transponder
Network (server)
Interlocking: security with multi-pointinterlocking mechanism
ModulesControl components for electronic locking systems
MIR00423
Decentralised rack suite
- Each rack/each door can be openedseparately - via own address
Access authorization administration
Access monitoring
Locking mechanism control
Access logging
MIR20102
A C T I V E C O M P O N E N T S
10.10
Embedded solution
Administration
Monitoring
Logging
Remote access
MIR20099
● Network● LAN● WAN● Internet
● Network● LAN● WAN● Internet
Individual Locking / Stand-Alone Solution
Access authorization administration
Monitored access
Interlocking mechanism control
Access logging
MIR20094
10.11
A C T I V E C O M P O N E N T S
MIR20109
The very small and modulardesign means that no additionalspace or greater installationdepths is required in the rack.
Contacts for emergency powersupply that can be activatedexternally using trade standardbatteries are integrated into eachswing handle.
An integrated light-emittingdiode signals with differentcolours to inform whether or notthe current access is authorised.
Each device of the series can benetworked with the other devices,which results in numerous possi-ble combinations and options.
Every opening process can beprotocolled in the network.Existing network structures canbe used for networking.
@Lock®
Strong points
- Conventional keys are replaced byelectro-mechanical locking components.
- A servomotor pulls the retaining awl backand releases the handle.
- Actively opening the door is, however,made with the hand as before.
- Easy exchange of the swing handle withlater installation using unchangedinstallation opening.
- Intended for standardised installationopenings of conventional swing handle.
- Can be easily and quickly upgraded tolocking system.
- Convenient administration of accessauthorizations.
@Lock Swing Handle, HID/IP- The swing handle opens after a regis-
tered transponder card has been read.- With the HID variant, the communication
between swing handle and PC runs via ajunction box and a server.
- The IP swing handle, by contrast, isconfigured via an IP address and isconnected directly via the network tothe PC.
- Up to 2,048 HID cards per swing handlecan be configured using a registeredmaster card.
- Configuration of the cards via thenetwork is also possible with theincluded software.
Technical data@Lock Swing Handle, HID(optional IP remote connection)- 100...240VAC, power supply not included
in the supply schedule- Operation with 12VDC/40mA
(max. 430mA)- Multi-colour status – LED- Real-time clock- Network communication is made
via external server (gateway)- Up to 250 handles can be administered
per server (IP address)
@Lock Swing Handle, IP- 100...240VAC, power supply not included
in the supply schedule- Operation with 12VDC/40mA
(max. 430mA)- Multi-colour status – LED- Real-time clock- Network communication with cabled
connection via integrated Ethernet10/100 Base T
Function- Opens after reading a registered card- Memory for 32 time segments- Memory for 2,048 cards per lever- Integrated logbook for 500 events- Result-related communication- 125 kHz transponder with unique code
(HID 26 bit system)
Supply schedule@Lock Swing Handle, HID1 Swing handle, HID1 Reader1 Reader connection cable1 Network node, CX20011 Network cable, CN2001
Supply schedule@Lock Swing Handle, IP1 Swing handle, IP1 Reader1 Reader connection cable1 Data CD
@Lock®Swing HandleSecurity for racks in the data and networking area
MIR20284
A C T I V E C O M P O N E N T S
10.12
The junction box is used to consecutivelyswitch the swing handle of the HID series andconnect with the server. The junction box hasthree ports – INPUT, MODULE and OUTPUT.INPUT – The INPUT is connected with theoutput of the previous junction box of the pre-vious handle of the strand. The INPUT port ofthe first junction box box is connected withthe server. These connections are set up withthe CN2001 cable.MODULE – The MODULE port is connectedvia a CN2001 cable with the reader moduleof the HID series.OUTPUT – The OUTPUT port is connectedwith the INPUT of the next junction box of thestrand. If the junction box is the last of thestrand, the termination pull-up resistor isattached to the OUTPUT port (included in theserver supply schedule).
Technical data- Operating voltage, 12V DC/throughput
current, 1.5 A max.- 3 Outputs, modular plug, 8p/8c (RJ45)- 1 Input, DC socket with 2.1 mm pin- Earthing screw, M4, earth connected
with GND
Function/applications- @Lock electrical connection- Lightening and overvoltage protection
module- EMC fault attenuation- Installation simplification- Voltage connection (with circuit breaker)- Interconnection of HID equipment- HID equipment power supply
@Lock® junction box, CX2001
The @Lock Server is the interface betweenthe HID swing handles connected via theRS485 cable and the network connected viaX-Port. It is used for intermediary storage ofresults and tasks and can administer up to250 users (swing handle).The X-Port can be configured using theRS 232 interface. The @Lock Server has anintegrated real-time clock, which is bufferedwhen power fails for up to 1 hour.
Technical data- Power supply: via an external plug-in
power supply, 12V (DC)- Nominal current: 80mA (DC)- Max. power consumption: 200mA (DC)
- Main board RS 485 -interface: Cable
(A, B, GND,+12V), max.length tothe nextgateway 5m
- PC interface: RS 232 cable(RXD, TXD, DTR,RTS, GND, +12V),RJ 45 plug,8-pole
- Network interface: X-Port, RJ 34 plug, 8-pole
- Memory space for max. 10 x 250tasks: Tasks
- Memory space for max. 100events: events
- Max. number of 250 unitsswing handles:
- Integrated real-time clock: with bufferingof up to 60 minat 25ºC
@Lock Server
MIR20280
MIR20283
10.13
A C T I V E C O M P O N E N T S
Model Order no. UP
@Lock Server, HID 01.180.011.9 1 unit
@Lock®Swing Handle, HID 01.180.022.9 1 unit
@Lock®Swing Handle, IP 01.180.023.9 1 unit
@Lock Network Node, CX2001 01.180.030.9 1 unit
@Lock Network Cable, CN2001 01.180.031.9 1 unit
@Lock Desktop Reader, HID 01.180.028.9 1 unit
@Lock Transponder Card 01.180.040.9 1 unit
Power Supply, PMI 2001, EU 01.180.035.9 1 unit
Power Supply, PMI 2001, UK 01.180.036.9 1 unit
Power Supply, PMI 2001, US 01.180.037.9 1 unit
Power Supply, PMI 2001, Japan 01.180.038.9 1 unit
Power Supply, PMI 2001, Australia 01.180.039.9 1 unit
The @Lock software is the user interface forcontrolling and configuring the @Lock SwingHandle. Using this software, the administratorcan create access codes and HID cards andassign users. The handle can be controlled inreal-time from the software platform. Allactions that are directly related with the swinghandles are stored in an SQL database (e.g.opening, closing, granted accesses and access-es rejected on the basis of non-authorization).
Technical data- MS Windows 2000/NT etc.- SQL database- TCP/IP network connection to the swing
handles- The number of handles and gateways
is only restricted by the capacity of thecomputer
- Communication with swing handle viaserver (gateways) or directly with @LockSwing Handle, IP
Functions/applications- Stand-alone administration programme
for the @Lock system- Requires max. 3-4 seconds for a status
update- Administration of users and rights- Administration of HID cards, opening of
active keys and access codes, closing,activation or deactivation of swinghandles
- Observation of authorised andunauthorised access attempts
- Recording of all events connected withswing handles
- Central observation of swing handle- Combination of all swing handles and
servers- Recording of events
@Lock® Software Programme
The transponder cards are read into theadministration software using the desktopreader. This enables the later configuration ofthe access media in the system (lock plancreation). The desktop reader is connected viathe RS-232 interface with the PC on which theadministration software is installed. Thetransponder card is inserted in the read-outunit for reading the transponder ID. Thereading process can be initiated in theadministration software by then clicking a key.
Technical data- Power supply: 12V +- 10%
(DC max. 400mA)via low voltagesocket
- Nominal current: 80mA (DC)- RS232 interface: RS 232 cable
(RXD, TXD, GND,Reader present,PC present),38,400 baud
- Connection cable: (reader – read-out unit) 8-pole,250 cm, ULstranded wireAWG 26
@Lock® Desktop Reader
MIR20282
MIR20281
A C T I V E C O M P O N E N T S
10.14
MIR20095
Model Order no. UP
Combi Lock 01.137.013.9 1 unit
- This additional lock, the aptly named“Override”, produces a combination swinghandle with particularly special advantages
- Innovative combination swing handle withtwo activation options
- Independent opening and closing of theswing handle via combination or cylinderlock
- General key function possible with racksuites
- Can be used for right and left closing doors
InstallationIn the standard installation opening of themiracel rack doors. Quick mounting withplug-in connections and screw fittings
Technical data- Cylinder lock- Combination lock can be individually
set with 3 digits- Independent activation
Supply schedule1 Swing handle with combi lock1 Mounting material set
Combi LockSecurity and flexibility realised mechanically
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
10KVM 10.16 to 10.40
10.15
A C T I V E C O M P O N E N T S
A C T I V E C O M P O N E N T S
10.16
KVMStrong points
Selection criteria / Strong points
Analogue KVM solutions Users Servers/PCs- SwitchMan 1 2/4 PCs- MasterConsole 1/2 4/8/16 servers
(up to 256 servers can be cascaded)- Z-Series 1 42 servers- Paragon II 2/4/8/16 32/42/64 servers
(up to 10,000 servers can be cascaded)
IP – Extender UsersIP Reach LARAeco 1IP Reach, M-Series 1-2IP Reach, TR-Series 1-4
Digital KVM solutions Users Servers- Dominion KX 1/2 16/32 servers- MasterConsole IP 1 8/16 servers
Serial console server Users Ports- Dominion SX 1 16/32 serial ports
Digital KVM solution + Users Portsserial console server- Dominion KSX 1 4/8 serial ports
4/8 KVM ports
Remote power managementIEC320 socket Control
PCR 8/12/20 serialSmart start 1x8 / 2x4 IP
CommandCentre 2.0
10.17
A C T I V E C O M P O N E N T S
KVMStrong points
KVM stands for “Keyboard, Videoand Mouse”. These three elementsare referred to collectively as aKVM console.
The main usage purpose of aKVM switch is to connect a singleKVM console with several pieces ofequipment. This enables access toand control of several computers orservers for users via the console.
KVM switches provide organisationsand companies of all sizes with thefollowing advantages with individualor multi-user access to severalservers:
Reduced costsAs the need to connect a keybo-ard, a monitor and a mouse nolonger applies with integration ofa KVM switch, only very few keyboard, monitor and mouse
components are required for administering numerous servers.This not only reduces hardwarecosts, but rather also savesvaluable space and simplifiespower supply, heating andcooling.
Improved business continuityKVM switches enable “out-of-band” access to servers andother IT equipment requiredwithin a company. They are notindependent as such from thecompany backbone or companynetwork. The access, administra-tion and control of the serversare consequently also guaranteedwith a downtime of the companynetwork. A complete systemrestart can even be performedvia a KVM switch from a remotelocation.
Independent of hardwareplatforms and operatingsystemsKVM switches are designed forheterogenous server environ-ments. They are not dependenton the hardware or the operatingsystem of a specific manufactur-er. They can be used in IT envi-ronments with servers of diffe-rent manufacturers, such as HP,IBM and Sun, and various opera-ting systems, such as Solaris,Unix or Windows.
Analogue and digitalKVM switches:Which switch do your requirefor your organisations?There is no one “right” answer tothis question. Both analogueswitch solutions with modularKVM via IP functions and digitalswitch solutions with integratedKVM via IP provide specificadvantages. An analogue “out-of-band” KVM solution is generallybest suited for small to medium-sized computer centres. Digital“in-band” KVM solutions by con-trast are the best choice for largenational or globally distributedcomputer centres.
Digital and analogue solutionscan be used independently of oneanother, or combined, dependingon the requirements of your com-pany. With one or two integratedswitches in an analogue solution,you can set up a connection witha small number of servers. Adigital KVM solution enablesconnection with a large numberof computer centres at severallocations. Depending on therequirement, you can howeveralso design a combined solutionwith analogue and digital KVMswitches.
Analogue KVM Switch Digital KVM Switch
Access/ • Out-of-band • In-bandconnection • Network-independent • Network-dependent
Advantages • Better • Fewer cablesvideo capacity/ • Easier andutilization cost-efficient
• Unblocked access scalability• Requires less • Uses existing
network bandwidth LAN infrastructure
Disadvantages • More Cat5 cables • Users are subjectrequired to the KVM via IP
• More components restrictions:• Video quality reduced - Latency
by distance - Unwantedimage changes
• Busy networkbandwidth
• Access blocking(restrictedconsole availability)
Typical Computer centre with up Companies (500 andapplications to 300 servers and up to more servers, 50 and
32 simultaneous users more simultaneous usersor several locations/remote environment)
The table summarises some of the more important differences between analogue and digitalKVM solutions.
A C T I V E C O M P O N E N T S
10.18
SwitchManControls 4 PCs from one keyboard, one monitor and one mouse
Organise your desk! Save space, time andmoney. SwitchMan is the desktop KVM switchfor everyone that wants to operate 2 or morePCs from their workstation. Just connect thePCs and the selected keyboard, monitor andmouse to the SwitchMan. It’s that easy! Younow have access to and control of the PCs viayour central keyboard, your monitor and yourmouse.
Use SwitchMan to:- Save space by avoiding superfluous
periphery equipment- Avoid costs of new periphery equipment
for new PCs- Save time with central access to each PC
SwitchMan is perfect for:- People that operate several PCs at work
or at home- Software developers- PC test procedures- Network administrators
Features- Works with all PS2 and AT computers- Fault-free booting and operation- Complete keyboard/mouse emulation- Dedicated processors for each channel- Individual selector switches with LED
displays- 1600 x 1200 resolution- PCs AutoScan with user-defined rate- Supports Microsoft “IntelliMouse”- Switching with the buttons on the front
or with a simple HotKey command- Power supply through connected PCs
(with USB version, power supply includ-ed in supply schedule)
SwitchMan PS2 specificationsDimensions256 mm (W) x 140 mm (D) x 53 mm (H),weight 0.7 kg
User connectionVGA monitor HD15 femalePS/2 keyboard mini-DIN 6 pin, femalePS/2 mouse mini-DIN 6 pin, femalePC connection VGA monitorHD 15 femalePS/2 keyboard mini-DIN 6 pin, femalePS/2 mouse mini-DIN 6 pin, femaleSerial mouse DB9 female
CertificationFCC Class B
SwitchMan CP specificationsDimensions76 mm (W) x 98 mm (D) x 25 mm (H),weight 0.54 kg
User connectionVGA monitor HDDB15 femalePS/2 keyboard mini-DIN 6 pin, femalePS/2 mouse mini-DIN 6 pin, femalePC connectionVGA monitor HDDB15 femalePS/2 keyboard mini-DIN 6 pin, femalePS/2 mouse mini-DIN 6 pin, female
SwitchMan USB specificationsDimensionsSwitchMan:1/2 USB 184 mm (W) x 123 mm (D)x 45 mm (H)SwitchMan:1/4 USB 235 mm (W) x 142 mm (D)x 45 mm (H)
SwitchMan 1/2 USB, weight 0.72 kgSwitchMan 1/4 USB, weight 1.05 kg
User connectionVGA monitor HDDB15 femaleKeyboard USB Type AMouse USB Type APC connectionVGA monitor HDDB15 femaleKeyboard USB Type BMouse USB Type B
KVM HU Consoles Computers Connections Order no. UP
SwitchMan 1/2 PS2 0 1 2 VGA/PS2/PS2 06.005.000.1 1 unit
SwitchMan 1/4 PS2 0 1 4 VGA/PS2/PS2 06.005.001.1 1 unit
SwitchMan 1/2 CP 0 1 2 VGA/PS2/PS2 06.005.002.1 1 unit
Fixed cable connection
SwitchMan 1/2 USB 0 1 2 VGA/USB/USB 06.005.003.9 1 unit
SwitchMan 1/4 USB 0 1 4 VGA/USB/USB 06.005.004.9 1 unit
Connection cable Length Connections Order no. UP
CSW18 1.8 m PS2 06.005.200.9 1 unit
CSW30 3 m PS2 06.005.201.9 1 unit
CSW USB 18 1.8 m USB 06.005.205.9 1 unit
CSW USB 30 3.0 m USB 06.005.206.9 1 unit
KVM20063
SIG20029
KVM20263
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
10.19
A C T I V E C O M P O N E N T S
KVM Switch MasterConsole
Control your servers with this simpleand completely equipped KVM solu-tion. Recover valuable space andincrease productivity.
Area of applicationBy using this switch you canremove expensive and super-fluous equipment by awardingcentralised control from onesingle workstation to 1 or 2 users.Individual models control 4, 8or 16 servers and the switchescan be cascaded in such a waythat you can administrate up to256 servers.The solution functions with allleading server types:
PC, Sun®, Mac®, Alpha,RS/6000, HP/9000, SGI andserial-controlled equipment;it also provides USB support.The solution is compatible withall combinations of computersthat run with Windows NT,Windows 2000, Novell NetWare®,Solaris,UNIX or Linux.
Especially thin coxial cables areused for connecting computers/servers. These require lessspace and ensure simple andstraightforward cable manage-ment. The cable is available inlengths, 0.6, 2, 4, 6 or 9 meters.
System componentsMasterConsole II- Enables access for a single
user to up to 256 servers bycascading several units
- Password protection integrated- Offers selection of
3 models:— MCC4 for up to 4 servers— MCC8 for up to 8 servers— MCC16 for up to 16 servers
MasterConsole MXU2- Enables access for 2 simulta-
neous users to up to 128 ser-vers by cascading several units
- Connection of the 2nd user ismade via a Cat5 e-cable andenables a remote access over adistance of up to 300 meters(with the URKVMG model re-ceiver at a remote workstation).
- Saves up to 120 usernames andprofiles:— MXU28 for up to 8 servers.— MXU216 for up to 16 servers.
Component specifications
W H D kg Power Supply Model Order no. UP
268 44 225 2.0 115V/230V 20 Watt Auto Sensing MCC4
390 44 225 2.8 115V/230V 20 Watt Auto Sensing MCC8
390 88 225 3.8 115V/230V 20 Watt Auto Sensing MCC16
390 44 200 2.4 115V/230V 20 Watt Auto Sensing MXU28
390 88 200 3.3 115V/230V 20 Watt Auto Sensing MXU216
KVM20293
Two-level configuration. Cascade theMasterConsole unit and administer up to128 or 256 servers, depending on the model.
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
A C T I V E C O M P O N E N T S
10.20
KVM Switch MasterConsole
HU Model Model Order no. UP
MasterConsole II (desktop)
MCC4 1 user x 4 server ports 06.005.020.1 1 unit
MCC8 1 user x 8 server ports 06.005.021.1 1 unit
MCC16 1 user x 16 server ports 06.005.022.1 1 unit
MasterConsole II (rack installation)
1 MCC4R 1 user x 4 server ports 06.005.023.1 1 unit
2 MCC16R 1 user x 16 server ports 06.005.025.1 1 unit
MasterConsole MXU2
1 MXU28 2 users x 8 server ports 06.005.040.1 1 unit
2 MXU216 2 users x 16 server ports 06.005.041.1 1 unit
MasterConsole MXU2 + URKVMG
1 MXU28G 2 users x 8 server ports 06.005.042.1 1 unit
2 MXU216G 2 users x 16 server ports 06.005.043.1 1 unit
Connection cable, PS/2 Server to MasterConsole
Model Length Model Order no. UP
CCP06 0.6 m 06.005.210.1 1 unit
CCPT20 2.0 m 06.005.211.9 1 unit
CCPT40 4.0 m 06.005.212.9 1 unit
CCPT60 6.0 m 06.005.213.9 1 unit
CCPT90 9.0 m 06.005.214.9 1 unit
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
10.21
A C T I V E C O M P O N E N T S
KVM Switch - Z-SeriesThe ultimate space-saver
Raritan’s innovative Z-Series provides a “switchless” solution for access to and controlof several servers. The access is made from auser console (keyboard, monitor and mouse)without causing valuable space in serverracks or shelves to be occupied in theprocess. The Z-Series 4200U works withRaritan’s unique data transmission technolo-gy, with which up to 42 servers can be con-trolled with this switch. The previously usedSingle Access KVM Switches with their expen-sive server-to-server cabling are no longerrequired.The system supports the demanding require-ments in the server management area. TheZ-Series also proves its value through the lowspace requirement and the CAT5(E) cablingtechnology, which enables remote access tocomputer systems up to an overall distanceof 300 meters.
Area of application- High number of 1 HU and 2 HU
rackmount servers in the 19” racks- Condensed data centre, external
business premises, ISPs, ASPs- Computer test labs, call centre, help
desk, training rooms
Simplified installation and operationThe Z-Series replaces the traditionalcabling of KVM switches for servers withthe innovative, chain-like “server-to-ser-ver” cabling. This significantly reduces theexpense for cabling while simultaneouslyincreasing the access distances. Small“Computer Interface Modules (Z-CIM)”are connected to the KVM ports of thecomputers and connected with oneanother with CAT5(E) cable. The Z-CIMstransmit the keyboard, monitor andmouse signals to the Z-Series user sta-tion, to which monitor, keyboard (PS/2 orSUN) and mouse are connected. The usercan select and control up to 42 serverswith the easy to operate on-screen menu.The Z-Series system is a “Plug & Play”system, with which individual servers canbe added during running operation. Theserver operation is not affected.
Seamless interface to Raritan’s“Paragon System”Server management system in theenterprise class.The Z-Series ist Paragon™ compatible.
The system enables the cluster-oriented, convenient access to and control of servergroups in data centres in which a numberof server racks with a high server densityare installed. A cluster is easily set up byconnecting the first Z-CIM module of theZ-Series to the Paragon basic unit.
System componentsA Z-Series system consists of twocomponents:the user console and the computerinterface modules (Z-CIMs).
The Computer Interface Module (Z-CIM)is connected to the keyboard, monitor andmouse outputs of the respective computerand provides failure-safe access to thecomputer with the Raritan keyboard/mouse emulation. The Z-CIMs areconnected via one single CAT5(E) cablerespectively with the next module; thefirst Z-CIM in the chain is connected tothe user console.
The user consoleenables the selection and control of upto 42 servers via a simple on-screen userinterface from the user console (PC orSUN keyboard, mouse and monitor).
Component specifications
User console USTSDimensions 290mm (W) x 255mm (D)
x 44mm (H)Weight 0.6 KgPower 100V/240V 50/60 Hz 5VA
Z-Series Computer Interface Modules
UKVMSPD (for PC)Dimensions 62mm (W) x 89mm (D) x
25mm (H)Weight 0.33 KgOutputs RJ45 IN/OUT
Additional for local PC KVM ports
UKVMSC (for PC)Dimensions 108mm (W) x 91mm (D) x
25mm (H)Weight 0.31 KgPower (optional) 100V/240V 50/60 Hz 5VAOutputs RJ45 IN/OUT
RACKDR1
KVM20052
KVM20033
HU Model Model Order no. UP
0 Z4200U Starter Kit (incl. 1x USTS, 3xUKVMSPD,1xTER-RJ45) 06.005.030.1 1 unit
0 Z4200U US TS Z4200U User Station 06.005.031.1 1 unit
0 Z4200U UKVMSPD Z4200 U PS/2 Interface Module (direct connect) 06.005.032.1 1 unit
0 Z4200U UKVMSC Z4200 U PS/2 Interface Module with local KVM 06.005.033.1 1 unit
0 Z4200U Bulk Pack with 20 UKVMSPD 06.005.034.1 10 unit
0 Z4200U UKVMSPD-40PAC Bulk Pack with 40 UKVMSPD 06.005.035.1 40 unit
0 Z4200U TER-RJ45 RJ 45 Terminator (1 required per suite) 06.005.036.1 1 unit
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
A C T I V E C O M P O N E N T S
10.22
KVM Switch Paragon IIThe stackable CAT5 KVM solution
Paragon II, is the leading stackableCat5 KVM (keyboard/video/mouse)solution. It enables control access toservers and other equipment at alltimes and from everywhere.With Paragon II you can stack up to128 ports per switch, and usingmultidimensional expansion you canadd up to 10,000 ports. Equipmentcosts are significantly reduced andexisting space is optimally used withthe advanced Paragon II KVM switchtechnology. This Paragon generationalso provides the highest degree ofoperating convenience, security andvideo quality for easy administrationof computer centres.
Area of application
“Non blocked” access – Up to64 users receive direct access toup to 10,000 servers.
“Stackable” Each master switchcan also be expanded by 128ports via slave equipment. Subsequent advantages:- Reduced cable requirement
between Paragon II units.- Reduces costs by more than
30%.- Reduces the space in the server
rack and the required HVACresources by a third.
A Paragon system consists of atleast three components. All compo-nents are connected with one ano-ther with a category 5 e-cable.
Master Unit (P2-UMTxxxxM)- A secure, intelligent and
“non-blocked” control unit forconnecting users and servers.Its stackable architecture ena-bles an extremely high portdensity, which is why thisswitch is ideally suited for com-prehensive computer centres.
User Station (P2-UST)- Connects each user console
(keyboard, monitor, mouse)with the Master Unit andconsequently provides theuser interface to computers.
Computer Interface Module(P2CIM)- Connects each computer with
the Master Unit and deliversdedicated “keep-alive” key-board/mouse emulation andfailure-safe server access.
Optional
Stacking Unit (P2-UMTxxxxS)- The cost-effective and space-
saving expansion unit withwhich the KVM system can beexpanded to up to 128 portswithout any difficulty withmaintenance of a “non-blocked”access, whereby 90% less cableper switch is required. Thestacking units are compatiblewith the Paragon II models,UMT832M and UMT1664M.
KVM20266
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
10.23
A C T I V E C O M P O N E N T S
KVM20255
KVM Switch Paragon IIThe stackable CAT5 KVM solution
Features- Connection of all components is
made with one single category5 UTP cable
- Localises users and computersup to 300 meters from one an-other
- Cross-platform support withseamless access to all opera-ting systems, platforms andconnections: Linux, Windows®NT, UNIX®, Novell, Sun®,IBM® RS/6000 and pSeries™,HP9000, Alpha™,SGI, ASCII/serial USB or PS/2.
- High video quality over furtherdistances. The automaticParagon II video optimisationprovides the best possible videoquality.
- Optional flexible server accessboth in and outside the compu-ter centre, worldwide via IP
- Easy plug-and-play installationwith automatic configuration
- “Keep-alive” keyboard/mouseemulation for fault-free opera-tion
- “Hot-swappable” componentswith no effect on server opera-tion
- User station supports PS/2and Sun keyboard
- High-performance, intuitiveon-screen user interface foreasy operation
- Tailor-made user profiles- Flexible, multi-level security
for guaranteeing authorisedcomputer access
- Three system operation modes:Private mode - Exclusive usercontrol of the selected compu-ter
- PublicView mode - Users canhave shared use of the videoof the selected computer PCShare mode - Users can useshared operation of the selec-ted computer
- Flash firmware update
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
A C T I V E C O M P O N E N T S
10.24
Component specifications
W H D kg Power Supply Model Order no. UP
440 44 290 4.54 110V/240V 50/60 Hz/0.6A P2-UMT 242
440 44 290 4.59 110V/240V 50/60 Hz/0.6A P2-UMT 442
440 44 290 4.46 110V/240V 50/60 Hz/0.6A P2-UMT 832M
440 89 290 5.68 110V/240V 50/60 Hz/0.6A P2-UMT 1664M
440 44 290 4.08 110V/240V 50/60 Hz/0.6A P2-UMT 832S
440 89 290 5.44 110V/240V 50/60 Hz/0.6A P2-UMT 1664S
290 44 255 1.90 110V/240V 50/60 Hz/0.6A PS-UST
32 15.6 77.4 0.07 P2-CIM-x
HU Model Model Order no. UP
Master Unit
1 P2-UMT242 2 users x 42 server ports 06.005.500.1 1 unit
1 P2-UMT442 4 users x 42 server ports 06.005.501.1 1 unit
1 P2-UMT832M 8 users x 32 server ports 06.005.502.1 1 unit
2 P2-UMT1664M 16 users x 64 server ports 06.005.503.1 1 unit
Stacking Unit
1 P2-UMT832S 32 expansion server ports for P2-UMT832M 06.005.512.1 1 unit
2 P2-UMT1664S 64 expansion server ports for P2-UMT1664M 06.005.513.1 1 unit
User station
1 P2-UST Analogue access with PS/2, USB or SUN console 06.005.520.1 1 unit
Computer Interface Module
P2CIM-PS2 CIM for PS/2 06.005.530.1 1 unit
P2CIM-PS2-32PAC CIMs for PS/2 06.005.531.1 32 units
P2CIM-PS2-64PAC CIMs for PS/2 06.005.532.1 64 units
P2CIM-SUN CIM for SUN 06.005.533.1 1 unit
P2CIM-USB CIM for USB 06.005.534.1 1 unit
P2CIM-SUSB CIM for SUN USB 06.005.535.1 1 unit
KVM20227
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
10.25
A C T I V E C O M P O N E N T S
IP Extender / IP ReachKVM IP remote access via Internet, LAN/WAN or modem/ISDN
With IP Reach you can easily, quicklyand extremely reliably access re-mote-controlled to several serversthat are connected with a KVM(keyboard, video, mouse) switch andoperate them regardless of whereyou or your servers are.
Area of applicationIP Reach can be connected tooutputs for keyboard, monitorand mouse of a server or to aKVM switch. It uses a high-per-formance realtime video-digital-ised and video compression algo-rithm, with which the video signalis received, digitalised and com-pressed and then transmitted toa remote PC.
The remote user has theability to directly access and fullycontrol the destination server.Use IP Reach at any time andfrom anywhere for convenientserver access:- Server control from inside and
outside a building- Central administration of
servers in branch offices- Provides remote support for
global data centres- Problem-free, reconfiguration
and restart of servers fromyour house
- Provides convenient and securelights-out server administration
Specification of components, IP-Reach, TR-Series
W H D Model Order no. UP
482 89 540 2 HE, IPR-TRX 1 unit
- Up to 4 IP access ports for KVMswitches or servers and up to4 direct, analogue access ports.
- Web-based KVM access viaInternet, LAN/WAN or dial-inmodem.
- Web-based access to serialconsole.
- Web-based administration ofIP Reach environments.
- DHCP or fixed IP configuration.- Network-independent access
via integrated modem(TR Series) or dedicated modemport (M Series).
- High-performance energysupply and fault-free Ethernet(TR Series)
- SNMP-capable- Keyboard macro mapping
- No effect on the performancecapacity of the destinationserver
- Upgrades of firmware possiblevia network
- SSL 128 bit, RSA public key,128 bit private input encryption
- User confirmation with optionalRADIUS support
- Use of only one additional, opennetwork port for protectingfirewall settings.
- Individually configurable userprofiles for multi-level security
- Private security button andIP filtering
- User event logging- Ability to deactivate modem and
browser access- Automatic log-out of inactive
users
Features (TR and M Series)
KVM20259
KVM20261
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
A C T I V E C O M P O N E N T S
10.26
IP Extender / IP ReachKVM IP remote access via Internet, LAN/WAN or modem/ISDN
Weight:13.4 Kg
Power supply:Redundant, 110/220V auto-switching; 50-60 Hz
KVM ports:DB25 female —for servers or KVM switchIPR-TR364 — 4 portsIPR-TR362 — 2 portsIPR-TR361 — 1 port
Users connections:DB25 male —For user consolesDirect analogue accessIPR-TR364 — 4 PortsIPR-TR362 — 2 portsIPR-TR361 — 1 port
Serial connection:DB9M (DTE)
Admin connection:PS/2 keyboard; PS/2 mouse;HD15 VGA Video
Remote accessNetwork: Dual failover 10/100
Ethernet (RJ45)Modem: Integrated 56K V.90
(RJ11 port)Protocols: TCP/IP, UDP, RADIUS,
SNMP, SNTP,DHCP,PAP, CHAP, HTTP
Screen resolutionPC text mode: 720x400PC graphic mode: 640x480,
800x600,1024x768,1152x864, 1280x1024
Sun® video mode: 1024x768,1152x900,1280x1024
Accessories(included in the supply schedule)Cable: All cables for
connection to thePC or a KVM switch
Remote access Raritan RemoteSoftware: Control software
or access via webbrowser (Win32)
KVM20259
Model: 1HU, wall rackincluding Rackmountbracket
Dimensions: 436mm (W) x264mm (D) x 44mm(H)
Weight: 3.91 Kg — IPR-M23.82 Kg — IPR-M1
Power 110/220V auto-swit-supply: ching; 50-60 HzKVM DB25 female —connections: For servers or KVM
switchIPR-M2 — 2 portsIPR-M1 — 1 port
Users: PS/2 keyboard; PS/2 Connections: Mouse, HD15 VGA
video; for userconsoles, directanalogue accessIPR-M2 — 2 portsIPR-M1 — 1 port
Serial DB9M (DTE)connection: Admin PS/2 keyboard; PS/2 connection: Mouse; HD15 VGA
video
IP Reach, M Series
KVM20261
KVM20260
IP Reach works using standard web browsersand enables simultaneous observation of theserver across the platforms.It is compatible with KVM switches fromRaritan and other manufacturers.
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
10.27
A C T I V E C O M P O N E N T S
KVM20259
Dimensions: 107mm (W) x177mm (D) x 22mm(H)
Weight: 0.5 kgPower Ext. plug-in powersupply: 3.3V / 2.5A
KVM transmissionTransmission: Keyboard, video
and mouse signalsScreen Max. 1280x1024resolution: pixels with 75 Hz
frame frequencyData rate: Automatic
adjustment to thetransmissionchannel
Operation: Via all Java-capablebrowsers
PortsLocal port: 2 x PS/2 for keybo-
ard and mouseHD 15 connector formonitor
Serial port: Configuration,external modem
Remote accessNetwork: 10/100 Ethernet
(RJ45)IP configu- With DHCP/bootpration: or static
Protocols:HTTP/1.1 andHTTPS (secure) WebServer ProprietaryConsole VideoProtocol
IP Reach, Lara ECO
HU Model Model Order no. UP
1 IPR LARA eco 1 user 06.005.162.1 1 unit
1 IPR – M1 1 user 06.005.160.1 1 unit
1 IPR – M2 2 users 06.005.161.1 1 unit
2 IPR – TR361 1 user 06.005.120.1 1 unit
2 IPR – TR362 2 users 06.005.125.1 1 unit
2 IPR – TR364 4 users 06.005.128.1 1 unit
TR36X-FG 1 channel upgrade for TR361, TR362 06.005.126.1 1 unit
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
A C T I V E C O M P O N E N T S
10.28
KVM Switch, Dominion KXKVM control using web browser
The Dominion KX is a secure, digitalKVM device in the enterprise classthat combines analogue switchingwith the high performance KVM viaIP technology (remote access).
Area of applicationOn the server rack the DominionKX enables control at BIOS levelof up to 32 servers and otherIT devices via just one keyboard,one monitor and one mouse.In contrast to most other KVMsolutions the Dominion KX hasadditional integrated capacitiesfor remote access. Using a webbrowser you consequently obtainthe same control at BIOS level ofthe servers from everywhere.TheDominion KX, which is designedfor all IT areas, combinesunrestricted access with a highdegree of security, integratedinterface for power supplycontrol, easy administration andthe highest possible video quality.This is all combined in one devicewith only 1 HU that can be eitheroperated as “stand alone” or withother solutions, includingCommandCenter.
System componentsThe Dominion KX consists oftwo components: the digital KVMSwitch and the ComputerInterface Module (CIM).Each CIM is connected withthe KVM ports of a server anddelivers a “keep alive” keyboard/mouse emulation, which ensuresthat the server never crashes.The CIMs also convert videosignals for transmission via UTPcable (Cat5/5e/6).The Dominion KX Switch isconnected with each CIM andprovides KVM via IP capacitiesfor remote access and a portfor local access for controllingthe servers in the server rack.Remote users can access theDominion KX via each networkedworkstation with a standard webbrowser.
Features- Easy to install in server rack
with a form factor of 1HU- Local user port for access in
the server rack- Integrated user interface for
power supply control- UTP cabling (Cat5/5e/6)- Highest port density- Plug&Play installation- Multi-platform CIMs for PS/2,
Sun and USB equipment- Dual Fail Over 10/100 Ethernet- Public SSL 128 bit RSA “public
key”, 128 bit “private key”encryption
- All data, including videotransmission, is encrypted
- Central authentification withLDAP, RADIUS or activedirectory support
- Protocolling and authentifica-tion of the local access andremote access
- Use of only one configurableTCP port for maintenance ofstrict firewall settings
- Adjusted user profiles- Flash firmware updates- Integrated web-based solution
for access and administration- Intuitive graphic user interface
(GUI)- High colour support
(15-Bit+)- Adjustable video settings for
various bandwidths- Lowest bandwidth requirement- Quickest mouse synchronisation
KVM20256
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
10.29
A C T I V E C O M P O N E N T S
Component specifications
W H D kg Power Supply Model Order no. UP
429 44 290 100V/240V, 50/60Hz, 0.6A KXx
33 15 76 100V/240V, 50/60Hz, 0.6A DCIM-x
3.90 100V/240V, 50/60Hz, 0.6A KX116
3.90 100V/240V, 50/60Hz, 0.6A KX216
4.10 100V/240V, 50/60Hz, 0.6A KX232
0.09 100V/240V, 50/60Hz, 0.6A DCIM-x
KVM Switch, Dominion KXKVM control via web browser
Model:1HU/19” width(19” brackets also supplied)Operating temperature: 0º – 40ºCHumidity: 20% -
85% RH
Remote connectionNetwork: Dual Fail Over
10/100 Ethernet(RJ45)
Modem port: DB9(F) DTEProtocols: TCP/IP, HTTP,
HTTPS, UDP,RADIUS, LDAP(S),SNTP, DHCP,PAP, CHAP
Port for local accessVideo: HD15(F) VGAKeyboard/ Mini DIN6(F) PS/2Mouse: USB A (F)
Screen resolutionsPC text mode: 720x400PC graphic 640x480, 800x600,mode: 1024x768,
1152x864, 1280x1024
Sun® video 1024x768, mode: 1152x900,
1280x1024
HU Model Model Order no. UP
1 KX116 1 remote user x 16 server ports 06.005.170.1 1 unit
1 KX216 2 remote users x 16 server ports 06.005.171.1 1 unit
1 KX232 2 remote users x 32 server ports 06.005.172.1 1 unit
Computer Interface Module
DCIM-PS2 CIM for PS/2 06.005.173.1 1 unit
DCIM-SUN CIM for SUN 06.005.174.1 1 unit
DCIM-USB CIM for USB 06.005.175.1 1 unit
DCIM-SUSB CIM for SUN USB 06.005.176.1 1 unit
KVM20256
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
A C T I V E C O M P O N E N T S
10.30
KVM Switch MasterConsole, IPKVM control via web browser
The Dominion IP provides an 8 or16-port high performance KVM switchthat combines analogue switchingwith the high performance KVM viaIP technology (remote access).
Area of applicationThe MasterConsole IP requiresonly 1 HU. It reliably controls upto 8 or 16 servers locally orremotely, and provides completeweb browser-based remoteaccess, also for local access viastandard monitor, keyboard andmouse. And all this with the bestpossible picture quality.The switch is operated via anon-screen display or a web-basedinterface.
Features- Compact solution in only 1 HU- No additional software or
licenses required- Quickest browser-based screen
video- Real power management
can be integrated using Powerover KVM
- Highest possible securitythanks to SSL Standard upto 256 bit
- Auto calibration and automaticadjustment of the display win-dow on the screen resolutionof the remote computer
- Support of all Vesa graphic andtext modes
- Intuitive on-screen display- Individual user access to speci-
fic KVM ports can be restricted- Up to 200 user profiles can be
individually defined with individ-ual rights
- Certificate management- Configurable TCP/IP port
numbers
- Individual user access to speci-fic KVM ports can be restricted
- 16-Port solution cascadeable upto 136 ports
Component specifications
Dimensions: 438mm (W) x185mm (D) x 44mm(H)
Power external plug-insupply: Power supply, 12V,
3.75A
Remote connectionNetwork: 10/100 BaseT –
Ethernet withautosensing (RJ45)LEDs for link,10/100 Mbit/s andactivity
Protocols: TCP/IP, HTTP,HTTPS, SNTP, DHCP
Port for local accessVideo: HD15(F) VGAKeyboard/ Mini DIN6(F) PS/2Mouse:
Serial portConnection: Sub D9Application: Configuration,
external modem,control of serialdevices via TelNet
KVM Port18IP 8 x HD 15
Comboconnector116IP 16 x HD 15
Comboconnector
Screen resolutionsLocal port: 1920x1440 with
60HzIP Port: 1280x1024 with 75Hz
10.31
A C T I V E C O M P O N E N T S
HU Model Model Order no. UP
1 MasterConsole 18IP 1 remote user x 8 server ports 06.005.550.1 1 unit
1 MasterConsole 18IP+ 1 remote user x 8 server ports 06.005.551.1 1 unit
Including all cables
1 MasterConsole 116IP 1 remote user x 16 server ports 06.005.552.1 1 unit
1 MasterConsole 116IP+1 1 remote user x 16 server ports 06.005.553.1 1 unit
Including all cables
Connection cable Length Connections Order no. UP
MCIP system cable 1.8 1.8 m 06.005.560.9 1 unit
MCIP system cable, 3.0 3.0 m 06.005.561.9 1 unit
MCIP system cable, 6.0 6.0 m 06.005.562.9 1 unit
MCIP system cable, 10.0 10.0 m 06.005.563.9 1 unit
MCIP16-port cascading 06.005.564.9 1 unitKVM20294
See also: the current
Telecom Special Catalogue!Where you will find more products:
• Indoor 19” rack systems
• Outdoor 19” rack systems
• Free-standing and wall cabinets
• Power supply systems
• Thermal management
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
A C T I V E C O M P O N E N T S
10.32
Serial Console Server SXStrong points
Dominion SX enables IT employeesto safely monitor and control allserial equipment at all times andfrom anywhere.
Area of applicationThe Dominion SX Series includeseverything that you could everexpect from a secure consoleserver - and more: a secure andscalable solution, easy to installand easy to use. The DominionSX enables central administrationof all users, servers and IT equip-ment, including:- Servers and headless servers:
Sun Solaris®, Sun Cobalt®,HP-UX®, UNIX®, Linuxservers, IBM®/AIX® servers,Windows® 2003 servers
- WAN equipment ISDN terminal adapter, channelbanks, CSU/DSU, PBX/PABX
- Network equipment Routers, Ethernet switches,Ethernet firewalls, Ethernetload balancer
- Power management:All serial controlled powerstrips and UPS equipment
System componentsDepending on the model, thedevices have 16 or 32 ports.Connection of the serial devicesis made via Cat5(E)/6 with anassociated adapter as 9DB or25DB plug-in.
Features- Light and convenient point-and-
click access via a web browserfrom a desktop computer orlaptop.
- Procurement, administrationand maintenance of SSH and/or terminal client software forhost and client not required.
- TCL scripts for remote monito-ring and results notificationsimplify the system administra-tion tasks.
- Can be put into operation withinminutes using Plug-and-Playand without client software.
- Maximum security-Encryptsthe entire communication withthe 128 bit secure socket layer(SSL) handshake protocol andRC4
- The architecture preventsunauthorized and unintentionaladding, changing and deletionand does not enable access tothe operating system of theconsole server.
- All users and administratorsuse the same type of authentifi-cation, authorization andaccounting (AAA).
- Supports user-defined securitycertificates.
- Encrypts and saves user namesand IDs with the MD5 hashcode.
KVM20256
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
10.33
A C T I V E C O M P O N E N T S
Serial Console Server SXSecure control via web browser
- Provides IP access lists (ACL)that prevent access via specificIP addresses.
- Contains “SecureChat”, a func-tion that enables collaborationwith the 128 bit SSL encryptionfor up to 10 users per port.
- Up to 10,000 devices can beadministered in conjunctionwith RaritanCommandCenter™.
- Supports up to 320 usersper unit.
- Integrated modem- Multi-platform: Solaris®,
HP-UX, UNIX®, Linux andWindows® 2003 servers.
Component specificationsDimensions: 44mm (H) x 438mm
(W) x 288mm (D)Weight: KX 16 4.35 kg
KX 32 4.53 kgPower 110/240V automaticsupply: adjustment: 50-60
HzOperating 0°C – 40°Ctemperature:Humid- 20 – 85 % HRity: Network: 10/100 Ethernet
(RJ45)Protocols: TCP/IP, RADIUS,
PAP, CHAP, HTTP,HTTPS, SSL, SSH
Modem Integrated 56K V.90connection: (RJ11 port)
HU Model Model Order no. UP
1 SX16 16 serial ports 06.005.134.1 1 unit
1 SX32 32 serial ports 06.005.135.1 1 unit
Serial Adapter
ASCSDB9F RJ45 on DB9 (F) 06.005.136.1 1 unit
ASCSDB9M RJ45 on DB9 (M) 06.005.137.1 1 unit
ASCSDB25F RJ45 on DB25 (F) 06.005.138.1 1 unit
ASCSDB25M RJ45 on DB25 (M) 06.005.139.1 1 unit
KVM20256
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
A C T I V E C O M P O N E N T S
10.34
Serial/KVM Switch, Dominion KSXStrong points
Dominion KSX is the first hardwaresolution that combine an IP accessvia web browser on KVM and serialdevice management in one singledevice.
Area of applicationWith the Dominion KSX you nolonger have to be personallypresent in your branch office.In contrast to software-basedremote management solutions,the Dominion KSX provides:- A complete overview of all
IT devices that are operated in abranch office.
- A single operating system-inde-pendent solution that enables acentralised and secure controlfor you.
- A network-independent accessvia a built-in modem for accessin emergency situations, evenwhen the network has beenshutdown.
- Control of your KVM equipmentat BIOS level and serial equip-ment at console level.
System componentsDepending on the model, thedevices have 4 or 8 serial portsand 4 or 8 KVM ports. Connectionof the serial devices is made viaCat5(E)/6 with an associatedadapter as 9DB or 25DB plug-in. Connection of the KVM ports ismade via CCPT cable, which isavailable in lengths, 0.6m, 2m,4m, 6m and 9m.
Features- Complete overview via a web
browser of all servers andnetwork equipment from onesingle screen. No additionalsoftware required.
- One single log-in and interfaceensure easy access to serversand other network equipment.
- Built-in modem for emergencyaccess in the event of a networkdowntime
- Equipment control using cursor,clicking or with command lines
- Secure centralised monitoringand displays
- Easy Plug and Play installationand operation
- Convenient flash upgrades - Dedicated interface for remote
power control- Port integrated for local access- One height unit (1HU) —
19” rack- Multi-platform, PS/2, Sun and
USB server- 64K intermediate storage
per serial port- SSL 128 bit, RSA public key,
128 bit private input encryption- User identification with RADIUS- Use of a single open network
port in conjunction with firewallsettings
- Individually set user profiles- Automatic logout of inactive
users- Option of deactivating the
modem and user access- To choose from: 4 or 8 KVM
console ports and serial ports
KVM20264
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
10.35
A C T I V E C O M P O N E N T S
Serial/KVM Switch, Dominion KXRemote office solution, KVM and serial in one device
Component specificationsModel: 1 HU, 19” rack can
be mountedDimensions: 44mm (H) x 440mm
(W) x 540mm (D)Weight: 11KgPower 110/240V, auto-supply: switching; 50-60 HzKVM 4 (KSX 440) / 8connections: (KSX 880)Serial 4 (KSX 440) / 8connections: (KSX 880)Admin port: PS/2 Keyboard;
VGA VideoOperating 0°C to 40°Ctemperature:
Remote accessNetwork: 10/100 Ethernet
(RJ45)Modem: Integrated 56K V.90
(RJ11 port)Protocols: TCP/IP, UDP, RADI-
US, SNMP, SNTP,DHCP, PAP, CHAP,HTTP, HTTPS
Screen resolutionPC text mode: 720x400PC graphic mode: 640x480,
800x600,1024x768,1152x864,1280x1024
Sun® video mode: 1024x768,1152x900,1280x1024
HU Model Model Order no. UP
1 KSX440 1 remote user x 4 serial ports 06.005.132.1 1 unit
x 4 KVM ports
1 KSX880 1 remote user x 8 serial ports 06.005.133.1 1 unit
x 8 KVM ports
Serial adapter
ASCSDB9F RJ45 on DB9 (F) 06.005.136.1 1 unit
ASCSDB9M RJ45 on DB9 (M) 06.005.137.1 1 unit
ASCSDB25F RJ45 on DB25 (F) 06.005.138.1 1 unit
ASCSDB25M RJ45 on DB25 (M) 06.005.139.1 1 unit
Connection cable Length Connections Order no. UP
CCP06 0.6 m 06.005.210.1 1 unit
CCPT20 2.0 m 06.005.211.9 1 unit
CCPT40 4.0 m 06.005.212.9 1 unit
CCPT60 6.0 m 06.005.213.9 1 unit
CCPT90 9.0 m 06.005.214.9 1 unit
KVM20265
KVM20264
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
A C T I V E C O M P O N E N T S
10.36
KVM Remote Power Control Socket StripsStrong points
These socket strips for remote con-trol enable system administrators tosafely monitor and control the powerfor computer centre equipment fromany location via web browser, serialor via an “out-of-band” access.
Area of applicationIn the event of a system faultand/or a system blocking, reboot-ing is often the only option andis of decisive importance.The remote socket strips makemanual interruption and dispatch-ing personnel unnecessary;the downtimes and the averagerepair times (MTTR) are reducedand productivity is ultimatelyincreased. The socket stripsprovide full compatibility withParagon, IP -Reach™, andDominion™, the solutions formanaging computer centres,and therefore enable remotemonitoring, rebooting andshutdown of all of the equipment,without requiring procurement ofadditional equipment, navigationof several different menus ormaintenance of different levelsof passwords or IDs. Access andcontrol of the Remote PowerControl units is attained usingone of the following options: - Via a serial interface with the
AUATC serial terminal converteror the SCS232 ConsoleSwitch™.
- Via the dedicated power controlinterface with the Dominion.
- Via a Raritan remote client withIP Reach.
System componentsDepending on the model, thesocket strips have 8, 12 or 20IEC-320 sockets. Each strip hasindividually controllable relays,which enable the user to monitorcurrent, voltage and energy.Control is made via a category5E cable that is connected to anEIA-232 port. This port can beconnected with every terminalserver and/or every externalmodem for access per dial-in.
Features- Absolute compatibility with
Paragon, IP Reach andDominion
- “True RMS” power monitoringwith alarm signal with over-loading and LED indicators
- Switching status remains withpower failure
- Individual or multiple control-ling of individual sockets
- Programmable unit IDs andname assignment of the individ-ual socket strip connections
- Voltage monitoring - Available in 1 HU or zero HU
model- 10 or 16 amp current intensity- Acoustic over voltage signal
KVM20317
10.37
A C T I V E C O M P O N E N T S
Component specifications
W H D kg Power Supply Model Order no. UP
425 44 134 PCR8
45 1423 45 PCS12
45 1671 45 PCS20
KVM Remote Power Control Socket StripsPower control for computer centres
Power supply:PCR8 230V, 10 A, 8 x
IEC320PCS12 230V, 10A 10 x
IEC320PCS20 230V, 16A 20 x
IEC320Operating 0° to 40°Ctemperature:Approvals: Part 15 A, CE, ETL
Entered inCSA C22.2 60950,UL 60950
HU Model Model Order no. UP
PCR8A-15 8 x IEC320 230V/10A 06.005.182.1 1 unit
PCR12A-20 12 x IEC320 230V/10A 06.005.180.1 1 unit
PCR20A-20 20 x IEC320 230V/16A 06.005.181.1 1 unit
Paragon, Dominion version
PCR8A-15-PK 8 x IEC320 230V/10A 06.005.185.1 1 unit
PCR12A-20-PK 12 x IEC320 230V/10A 06.005.183.1 1 unit
PCR20A-20-PK 20 x IEC320 230V/16A 06.005.184.1 1 unit
KVM20262
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
A C T I V E C O M P O N E N T S
10.38
IP Remote Smart Start Socket StripsPower control for computer centres
These socket strips for remote con-trol enable system administrators tosafely monitor and control the powerfor computer centre equipment fromany location via web browsers.
Area of applicationIn the event of a system faultand/or a system blocking, reboot-ing is often the only option andis of decisive importance. Theremote socket strips makemanual interruption and dispatch-ing personnel unnecessary;the downtimes and the averagerepair times (MTTR) are reducedand productivity is ultimatelyincreased. Access and controlof the units is made via an IPremote access.
System componentsDepending on the model, thesocket strips have 2x4 or 1x8IEC-320C13 sockets. Each striphas individually controllablerelays, which enable the userto monitor current, voltage andenergy. Control is made via anRJ45 port with IP access.Up to 64 switching channelscan be cascaded via the integrat-ed RS485/422 interface.
Features- Cascading of up to 64 channels- Operation via web frontend,
Windows software or emergen-cy switch on the front
- Overvoltage protection (15 A)with electric fuses on thefront that can also be used asswitches
- FCC, CE, UL and TÜV certified- Two programmable external
contacts: warning possible withlow voltage and overvoltage
- Power-on power restriction:prevents activation of electricfuse when switching on
- Local emergency control viaswitch on the front
- Automatic monitoring of mainsvoltage, current and frequency
- Controllable alarm contacts
Component specifications
W H D kg Power Supply Model Order no. UP
438 44 209 3,7 1x8IP 230V, 7.5A, 8 x IEC320C13
2x4 230V, 2x7.5A, 2x4 x IEC320C13
Power input plug, IEC 320C14
HU Model Model Order no. UP
Smart Start 1x8IP 8 x IEC320 230V/7.5A 06.005.800.1 1 unit
Smart Start 2x4IP 2 x 4 x IEC320 230V/7.5A 06.005.801.1 1 unit
KVM20318
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
10.39
A C T I V E C O M P O N E N T S
CommandCenter™Strong points
CommandCenter is the administra-tion solution from Raritan.The CommandCenter designed forthe complete control of the entirecompany combines the administra-tion of the Raritan Dominion™Series, the Paragon® and IP-Reach™Switches and all servers andIT equipment connected to Raritanequipment. CommandCenter™enables secure access to eachdevice in the entire network andtheir display via just one IP address.With the integration of serversand network equipment into onesingle structure view, CommandCentre enables user access andcentral administration of a globalnetwork, at all times and from anylocation.
Area of applicationCommandCenter™ is the idealsolution for companies with atleast one computer centre orseveral remote branch officesand provides:- Access to all equipment in the
computer centre and controlof all devices via an intuitivegraphic interface.
- Time and spatially unrestrictedoptions for monitoring, diagno-sis and solution of networkproblems.
- Secure and centralised admin-istration in several computercentres, branch offices/subsidi-aries and at remote locationsvia a secure and network-inde-pendent device.
FeaturesCentralised server administration- Single IP address reduces the
complexity of the administrationof several Raritan Dominion,Paragon and IP Reach devices,including firmware updates anduser access authorizations
- Combines KVM, serial consoles,power strips and devices inremote branch offices/subsidi-aries into a single structureview
- Selection between secureremote access using webbrowser or SSH via the Internet,intranet or VPN to all connecteddevices
Complete security- CommandCenter™ combines
efficient security features thatenable integration into existingauthentification tools such asActive Directory, LDAP-S,RADIUS and TACACS+ as wellas the use of central securityguidelines
- An integrated authentificationserver provides the downtimesecurity in the event of aproblem with an external serveror the network
- Robust security guidelines forthe authorization of individualusers up to port level
- 128 bit-SSL “private” and“public key” encryption
- IP-based access control listsand IP filtering grant or restrictuser access
- Flexible options for the sessiontimeout and expiry of passwords
- “Strict” authentification ofusernames and passwords
- Application architecture execu-ted under embedded, securedLinux operating system
KVM20258
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
A C T I V E C O M P O N E N T S
10.40
CommandCenterCentral control of global IT devices via a web interface
Hardware features- Two power supplies with
separate mains cables thatcan be swapped out duringoperation
- Two network cards for improv-ing the Ethernet downtimesecurity
- Two mirrored hard disks forhigher availability
- LED indicators for activity/status
- Port for local administrationand maintenance on theserver rack
- Integrated modem for accessin emergency cases
Software features- Plug&Play devices – No server
or client software installationrequired
- All features such as access,configuration and administra-tion are accessible via the webbrowser
- High-performance portalinterface enables adjustablegroupings and device viewsbased on authorizations
- Automatic detection of Raritandevices with information ondevice availability, device statusand alarm signals
- Flexible user access licensemodel
- Syslog and SNMP integration
HardwareProcessor: Intel® Pentium® III
1 GHzRAM: 512 MB ECC working
memory(Error Checking andCorrecting)
Ethernet Two 10/100 Ethernetinterfaces:network interfacesHard disk ATA RAID 1 card withand 2 40-GB-ATA controller: hard disksCD-ROM Slot load 40x, read-Hard disk: onlyConsole: DB-9 RS232 console
port
Remote connectionNetwork: 10/100 Ethernet (RJ45)Modem: V.92 (56 Kbit/s)
modem; RJ-11 portProtocols: TCP/IP, UDP, RADIUS,
SNMP, SNTP, SSH,HTTP, HTTPS
Component specifications
W H D kg HU Power Supply Order no. UP
1 CommandCenter 06.005.164.1 1 unit
440 44 563 Redundant power supplies
that can be swapped out during operation
with automatic voltage adjustment,
110/220 V – 2.0 A
KVM administration port: 1
Serial administration port: 1
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
11TFT 11.2 to 11.8
11.1
A C T I V E C O M P O N E N T S
A C T I V E C O M P O N E N T S
11.2
TFT Drawer, 1 HU, TD15/TD17For 19” installation
- Space-saving with only 1 HU installationheight
- Low installation depth- Integrated country-specific laptop keyboard
with touchpad- TFT in the pushed-in status protected from
below- Mechanical switch turns off power to display
in folded position- Interlocking full extension rails- With 2 snap lock catches on the front
(transport and pushed-in status safety)- Hand support of sponge rubber for relaxed
writing- Touchpad with left and right mouse button- Integrated wide range input power supply
(100 - 240 VAC ) with IEC 320 socket andprotected contact mains cable
15” Display Technical Data (TD15)- 15” TFT LCD display- Resolution, 1024 x 768 (XGA)- Typical brightness, 250cd/m22
- Contrast ratio 400:1 (typical)- 16.7 million colours- On-screen menu- Changes that stay abreast of technical
progress
17” Display Technical Data (TD17)- 17” TFT LCD display- Resolution, 1280x 1024 (SXGA)- Typical brightness, 250cd/m22
- Contrast ratio 500:1 (typical)- 16.7 million colours- On-screen menu- Changes that stay abreast of technical
progress
ColourReplace .x with the colour of your choiceFinal digit of order number .1,RAL 7035 light-greyFinal digit of order number .8,RAL 7021 , dark-grey
Supply schedule1 VGA cable1 Mouse cable PS/21 Keyboard cable PS/21 TFT Drawer1 Mains cableTelescopic slides with mounting set(D 800 mm - 1000 mm /d 550 mm - 850 mm)1 2-point hinged cable router Operating instructions
W H D HU Display Model Order no. UP
19” 390 1 15” LCD Germany 06.100.730.x 1 unit
19” 390 1 15” LCD Sweden 06.100.730.x000001 1 unit
19” 390 1 15” LCD England 06.100.730.x000002 1 unit
19” 390 1 15” LCD France 06.100.730.x000003 1 unit
19” 390 1 15” LCD Italy 06.100.730.x000004 1 unit
19” 390 1 15” LCD Spain 06.100.730.x000005 1 unit
19” 390 1 15” LCD Denmark 06.100.730.x000006 1 unit
19” 390 1 15” LCD Belgium 06.100.730.x000007 1 unit
19” 390 1 15” LCD USA 06.100.731.x 1 unit
19” 390 1 15” LCD Switzerland 06.100.732.x 1 unit
19” 420 1 15” LCD-48V DC Germany 06.100.850.x 1 unit
19” 420 1 15” LCD-48V DC England 06.100.851.x 1 unit
19” 420 1 15” LCD-48V DC Switzerland 06.100.852.x 1 unit
W H D HU Display Model Order no. UP
19” 430 1 17” LCD Germany 06.110.000.x 1 unit
19” 430 1 17” LCD Sweden 06.110.000.x000001 1 unit
19” 430 1 17” LCD England 06.110.000.x000002 1 unit
19” 430 1 17” LCD France 06.110.000.x000003 1 unit
19” 430 1 17” LCD Italy 06.110.000.x000004 1 unit
19” 430 1 17” LCD Spain 06.110.000.x000005 1 unit
19” 430 1 17” LCD Denmark 06.110.000.x000006 1 unit
19” 430 1 17” LCD Belgium 06.110.000.x000007 1 unit
19” 430 1 17” LCD USA 06.110.001.x 1 unit
19” 430 1 17” LCD Switzerland 06.110.002.x 1 unit
VHP20098
VHP20148
VHP20047
TFT Drawer, 1 HU, TD15
TFT Drawer, 1 HU, TD17
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
11.3
A C T I V E C O M P O N E N T S
TFT Drawer with KVM Switch, TDK 16-15/TDK 8-15
KVM description- Integrated KVM switch for controlling
up to 8 or 16 computers- Enables access to servers up to 10 m
away per port with CAT5 cable- Space-saving with only 1 HU installation
height- Selection and control of the computer is
made via an easy to use on-screen userinterface on the TFT console
- The RICC module is connected to thekeyboard, monitor and mouse outputsof the respective computer.The RICCs are connected via a CAT5cable with the switch.
- Multi-platform capable RICCs(in accessories range) enable thecombination of PCs, SUNs and deviceswith USB interface
- The keyboard and mouse emulationis integrated in the RICC for fault-freeoperation with interrupted cableconnection
TFT description- Integrated, country-specific laptop
keyboard with touchpad and integratednumbers block
- TFT in the pushed-in status protectedfrom below
- Interlocking full extension rails- Hand support of sponge rubber for
relaxed writing- Touchpad with integrated right mouse
button function- Right and left mouse button- Integrated wide range input power
supply (100 - 240 VAC ) with IEC 320socket and protected contact mainscable
- With German keyboard layout (88 keys)- On-screen menu for setting monitor
parameters- Installation depth 590 mm for racks
from 800 to 1000 mm
15” Display Technical Data-15” TFT LCD display- Resolution, 1024 x 768 (XGA)- Typical brightness, 250cd/m22
- Contrast ratio 400:1 (typical)- 16.7 million colours- On-screen menu- Changes that stay abreast of technical
progress
17” Display Technical Data- 17” TFT LCD display- Resolution, 1280x 1024 (SXGA)- Typical brightness, 250cd/m22
- Contrast ratio 500:1 (typical)- 16.7 million colours- On-screen menu- Changes that stay abreast of technical
progress
ColourFinal digit of order number .1:RAL 7035, light-greyFinal digit of order number .8:RAL 7021, dark-grey
Supply schedule1 TFT drawer with 8-way or 16-way
KVM switch1 Mains cable1 19” Mounting set for installation
depth 590 – 850 mm2 Mounting bracketsOperating instructions
How suppliedFully assembledWithout RICC module
NoteRICC modules required for connecting thecomputer (06.100.882.9 VGA-PS/2-PS/2).Optionally available as accessory.
W H D HU Display KVM Model Order no. UP
19” 590 1 15” LCD 8-way Germany TDK 8-15 06.110.025.x 1 unit
19” 590 1 15” LCD 8-way USA TDK 8-15 06.110.026.x 1 unit
19” 590 1 15” LCD 8-way Switzerland TDK 8-15 06.110.027.x 1 unit
19” 590 1 17” LCD 8-way Germany TDK 8-17 06.110.028.x 1 unit
19” 590 1 17” LCD 8-way USA TDK 8-17 06.110.029.x 1 unit
19” 590 1 17” LCD 8-way Switzerland TDK 8-17 06.110.030.x 1 unit
19” 590 1 15” LCD 16-way Germany TDK 16-15 06.110.031.x 1 unit
19” 590 1 15” LCD 16-way USA TDK 16-15 06.110.032.x 1 unit
19” 590 1 15” LCD 16-way Switzerland TDK 16-15 06.110.033.x 1 unit
19” 590 1 17” LCD 16-way Germany TDK 16-17 06.110.034.x 1 unit
19” 590 1 17” LCD 16-way USA TDK 16-17 06.110.035.x 1 unit
19” 590 1 17” LCD 16-way Switzerland TDK 16-17 06.110.036.x 1 unit
Further national versions on request
RICC PS/2-PS/2-VGA 06.100.882.9 1 unit
VHP20148
VHP20284
VHP20292
A C T I V E C O M P O N E N T S
11.4
TFT Drawer, 1 HU, TD-KZ 15/TD-KZ 17With KVM switch
- Space-saving with only 1 HU installationheight
- Low installation depth- Integrated, country-specific laptop keyboard
with touchpad- TFT in the pushed-in status protected from
below- Mechanical switch turns off power to the
display in the folded status- Interlocking full extension rails- With 2 snap lock catches on the front
(transport and pushed-in status safety)- Hand support of sponge rubber for relaxed
writing- Touchpad with left and right mouse button- Integrated wide range input power supply
(100 240 VAC ) with IEC 320 socket andprotected contact mains cable
KVM Switch description- 1 User, can be expanded from 1 to 42
computers - Ideal as multiport KVM solution for all
current systems, such as PS/2-VGA,USB, Sun-13W3, serial devices
- Max. cable length of 300 meters viaCat5 UTP cable
- Easy installation and expansion withplug and play
- Expansion of the computers is possibleat all times at any point of the chain
- TFT in pushed-in status protected frombelow
- Computer Interface Module, the directand secure connection to the computerif the connection cable to the switch isinterrupted.
15” Display Technical Data-15” TFT LCD display- Resolution, 1024 x 768 (XGA)- Typical brightness, 250cd/m22
- Contrast ratio 400:1 (typical)- 16.7 million colours- On-screen menu- Changes that stay abreast of technical
progress
17” Display Technical Data- 17” TFT LCD display- Resolution, 1280x 1024 (SXGA)- Typical brightness, 250cd/m22
- Contrast ratio 500:1 (typical)- 16.7 million colours- On-screen menu- Changes that stay abreast of technical
progress
ColourReplace .x with the colour of your choiceFinal digit of order number .1,RAL 7035 light-greyFinal digit of order number .1,RAL 7021, dark-grey
Supply schedule1 TFT Drawer1 Mains cable1 Terminator1 Mounting kit2 Telescopic slides with mounting set
(D 800 mm - 1000 mm /d 550 mm - 850 mm)
1 2-point hinged cable router
W H D HU Display Model Order no. UP
19” 465 1 15” LCD Germany TD-KZ 15 06.110.010.x 1 unit
19” 465 1 15” LCD Sweden TD-KZ 15 06.110.010.x000001 1 unit
19” 465 1 15” LCD England TD-KZ 15 06.110.010.x000002 1 unit
19” 465 1 15” LCD France TD-KZ 15 06.110.010.x000003 1 unit
19” 465 1 15” LCD Italy TD-KZ 15 06.110.010.x000004 1 unit
19” 465 1 15” LCD Spain TD-KZ 15 06.110.010.x000005 1 unit
19” 465 1 15” LCD Denmark TD-KZ 15 06.110.010.x000006 1 unit
19” 465 1 15” LCD Belgium TD-KZ 15 06.110.010.x000007 1 unit
19” 465 1 15” LCD TD-KZ 15 06.110.010.x000008 1 unit
19” 465 1 15” LCD USA TD-KZ 15 06.110.011.x 1 unit
19” 465 1 15” LCD Switzerland TD-KZ 15 06.110.012.x 1 unit
19” 505 1 17” LCD Germany TD-KZ 17 06.110.015.x 1 unit
19” 505 1 17” LCD Sweden TD-KZ 17 06.110.015.x000001 1 unit
19” 505 1 17” LCD England TD-KZ 17 06.110.015.x000002 1 unit
19” 505 1 17” LCD France TD-KZ 17 06.110.015.x000003 1 unit
19” 505 1 17” LCD Italy TD-KZ 17 06.110.015.x000004 1 unit
19” 505 1 17” LCD Spain TD-KZ 17 06.110.015.x000005 1 unit
19” 505 1 17” LCD Denmark TD-KZ 17 06.110.015.x000006 1 unit
19” 505 1 17” LCD Belgium TD-KZ 17 06.110.015.x000007 1 unit
19” 505 1 17” LCD TD-KZ 17 06.110.015.x000008 1 unit
19” 505 1 17” LCD USA TD-KZ 17 06.110.016.x 1 unit
19” 505 1 17” LCD Switzerland TD-KZ 17 06.110.017.x 1 unit
Z-Cim for PS/2 PS/2 VGA 06.005.032.1 1 unit
Z-Cim for PS/2 PS/2 VGA 06.005.034.1 20 units
Z-Cim for PS/2 PS/2 VGA 06.005.035.1 40 units
* Please note! TFT drawer supply schedule without Z-Cim.
VHP20098
VHP20161
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
11.5
A C T I V E C O M P O N E N T S
LCD TFT Monitors, TM 15/TM 17/TM 19For 19” installation
- Space-saving with installation depth ofonly 100 mm
- Installation height, 8 HU (15”)- Installation height, 9 HU (17”)- 2 Handles for easy installation in
19” racks- Monitor level, horizontal, pivot adjustable,
+/-10º- VESA (100 mm) adaption on the rear- Integrated wide range input power supply
(100 - 240 VAC ) with IEC 320 socket andprotected contact mains cable
Display Technical Data (see table)- 16.7 million colours- On-screen menu- Changes that stay abreast of technical
progress
ColourReplace .x with the colour of your choiceFinal digit of order number .1,RAL 7035 light-greyFinal digit of order number .1,RAL 7021 , dark-grey
Supply schedule1” TFT LCD monitor1 Mains cable1 Power supply1 19” mounting set1.5 m VGA connection cable
W H D HU Display Resolution Brightness Contrast Order no. UP
19” 100 8 15” LCD 768x1024 350 cd/m2 300:1 06.110.050.x 1 unit
19” 100 9 17” LCD 1280x1024 250 cd/m2 500:1 06.110.051.x 1 unit
19” 100 9 19” LCD 1280x1024 250 cd/m2 500:1 06.110.052.x 1 unit
LCD TFT Monitors, TM-T 15/TM-T 17/TM-T 19For 19” installation with touchscreen
- Space-saving with installation depth ofonly 100 mm
- Installation height, 8 HU (15”)- Installation height, 9 HU (17”)- 2 Handles for easy installation in
19” racks- Monitor level, horizontal, pivot adjustable,
+/-10º- VESA (100 mm) adaption on the rear- Integrated wide range input power supply
(100 - 240 VAC ) with IEC 320 socket andprotected contact mains cable
Touchscreen Technical Data- Resistive 4 wire touch- With USB port- Supports Windows XP, Windows 2000,
Windows 95/98, Windows ME, WindowsNT 4.0, Windows CE 2.13/3.0.net, DOS,Linux RedHat, LinuxMandrake, Mac/OS9
ColourReplace .x with the colour of your choiceFinal digit of order number .1,RAL 7035 light-greyFinal digit of order number .1,RAL 7021, dark-grey
Supply schedule1” TFT LCD monitor1 Mains cable1 Power supply1 19” mounting set1.5 m VGA connection cable1.5 m USB connection cable fortouchscreen1 CD ROM with drivers and software
W H D HU Display Resolution Brightness Contrast Order no. UP
19” 100 8 15” LCD 768x1024 350 cd/m2 300:1 06.110.065.x 1 unit
19” 100 9 17” LCD 1280x1024 250 cd/m2 500:1 06.110.066.x 1 unit
19” 100 9 19” LCD 1280x1024 250 cd/m2 500:1 06.110.067.x 1 unit
VHP20175
VHP20174
VHP20176
VHP20203
A C T I V E C O M P O N E N T S
11.6
LCD TFT Desktop Monitor, TM-V 15/TM-V 17/TM-V 19Without 19” frame
- Suitable for workstation and industrialapplications
- Robust metal enclosure- OSD menu, front, monitor swivel arm, rear- Integrated wide range input power supply
(100 240 VAC) with IEC 320 socket andprotected contact mains cable
Technical data (see table)- 16.7 million colours- On-screen menu- Changes that stay abreast of technical
progress- VGA input with 2 meter connection
cable 17” and 19” also with DVI input
ColourReplace .x with the colour of your choiceFinal digit of order number .1,RAL 7035 light-greyFinal digit of order number .1,RAL 7021, dark-grey
Supply schedule1 TFT LCD monitor1 Mains cable1 Power supply1 19” mounting set1.5 m VGA connection cable (15”)
NotePlease note that a base or a monitor armis required for these monitors.
W H D HU Display Resolution Brightness Contrast Order no. UP
440 320 52 15” LCD 768x1024 350 cd/m2 300:1 06.110.056.x 1 unit
440 364 52 17” LCD 1280x1024 250 cd/m2 500:1 06.110.057.x 1 unit
440 364 52 19” LCD 1280x1024 250 cd/m2 500:1 06.110.058.x 1 unit
VHP20157
VHP20272
- Monitor is horizontally pivot adjustable,+90º/-25º- Stable and robust metal model
Further swivel monitor arms can be found inour Technical Furniture Catalogue.
W H D HU Model Order no. UP
250 300 200 tiltable monitor stand 15”/17”/19” 06.110.060.x 1 unit
Flight Case
- The ideal protection for all Knürr TFTdrawers
- Especially developed for mobile use asservice and diagnostics unit
- Solid aluminium case, lockable- Sturdy carrying handle- Fitted with special absorption mats
- Removable cover- Additional storage space for all connection
cables and any possibly required accesso-ries, such as file folders or tools
- Folding front panel guarantees ergonomicoperation of the TFT drawer at all times
W H D kg Order no. UP
700 525 105 9 06.110.020.1 1 unit
VHP20286
VHP20287
11.7
A C T I V E C O M P O N E N T S
19” Keyboard Drawer, 1 HU/UWith extension for PC mouse
W H D HU/U d L For rack type Order no. UP
19” 43.6 800/900 1 miracel/smaract 01.136.379.1 1 unit
- With hand support- Mouse surface optionally right/left pull-out- Storage drawer for PC mouse
DimensionsUseable storage surface: dimensions without hand support W 372 mm x D 209 mm x H 32 mm
Finish / ColourPowder-coated texture, RAL 7035,light-grey
Supply schedule1 Keyboard drawer1 Pair of telescopic slides1 Hand supportMounting material
How suppliedFlat packed kit
NoteKeyboard not included in supply scheduleNot for rack depth D 600
MEC00116
19” Keyboard Drawer, 1 HU/UFor touchpad keyboard
W H D HU/U d L For rack type Order no. UP
19” 43.6 800/900 1 miracel/smaract 01.136.380.1 1 unit
- With hand support
DimensionsUseable storage surface: dimensionswithout hand support, W 418 mm x D 263mm x H 32 mm
Finish / ColourPowder-coated texture, RAL 7035,light-grey
Supply schedule1 Keyboard drawer1 Pair of telescopic slides1 Hand supportMounting material
How suppliedFlat packed kit
NoteKeyboard not included in supply scheduleNot for rack depth D 600
MEC00107
Compact Keyboard
W H S HU/U A1 A2 Pmax Model Order no. UP
Germany 06.002.165.3 1 unit
- Suitable for keyboard drawer 01.136.379.1- Flat compact keyboard with 86 keys for AT
and PS/2 systems- Low space requirement and low weight- Ideal for portable and 19” systems- High reliability with “gold crosspoint
contacts”- For Windows 98/ME/NT/2000/XP
Electrical data- Power supply
+3.3-5 V/DC max. 10 mA- Mains cable (1.7 m),
mini DIN plug (PS/2)
DimensionsLength x width x height281.5 x 131.5 x 24 mm
VHP00157
19” Compact KeyboardFlat, IBM-compatible keyboard with integrated touchpad
W H S HU/U A1 A2 Pmax Model Order no. UP
Germany 06.002.177.3 1 unit
VHP00203
- Suitable for keyboard drawer 01.136.380.1- Model with 105 keys- Integrated mouse function
Electrical data- Power supply
+5 V/DC max. 18 mA- Connection cable: (1.8 m)
round cable with tapping for two 6-pin mini DIN plugs (PS/2)
- For Windows 98/ME/NT/2000/XP
DimensionsLength x width x height415 x 193 x 37 mm
A C T I V E C O M P O N E N T S
11.8
19” Keyboard Drawer, 1 HU/UFor 19” keyboard
W H D HU/U d L For rack type Order no. UP
19” 43.6 600 1 440 miracel/smaract 19” 02.011.101.1 1 unit
19” 43.6 800 1 565 miracel/smaract LAN 02.011.101.1 1 unit
19” 43.6 800 1 640 miracel/smaract 19” 02.011.101.1 1 unit
19” 43.6 900 1 665 miracel/smaract LAN 02.011.101.1 1 unit
19” 43.6 900 1 740 miracel/smaract 19” Server 02.011.101.1 1 unit
19” 43.6 1000 1 740 miracel 19” Server 02.011.101.1 1 unit
19” 43.6 600 1 435 doubleprorack LAN 02.011.101.1 1 unit
19” 43.6 800 1 635 doubleprorack LAN 02.011.101.1 1 unit
- With hand support- With cable strain relief
MaterialMain unit, sheet steel, 1.0 mmFront panel, sheet steel, 1.0 mm
Finish/ColourPowder-coated texture, RAL 7035,light-grey
Supply schedule1 19” keyboard drawer, 1 HU1 Pair of telescopic slidesVelcro strip for keyboard mountingMounting material
How suppliedPreassembled
SCH00059
SCH00055
19” Keyboard Drawer, 1 HU/UWithout extension for PC mouse
W H D HU/U d L For rack type Order no. UP
19” 43.6 800/900 1 miracel/smaract 01.136.378.1 1 unit
- With hand support
Material / FinishSheet steel, 1.25 mmHand support, sponge rubber
DimensionsUseable storage surface: dimensions without hand support W 372 mm x D 209 mm x H 32 mm
Finish / ColourPowder-coated texture, RAL 7035,light-grey
Supply schedule1 Keyboard drawer1 Pair of telescopic slides1 Hand supportMounting material
How suppliedFlat packed kit
NoteKeyboard not included in supply scheduleNot for rack depth D 600
MEC00109
19” Compact KeyboardIBM-compatible keyboard with trackball
W H S HU/U A1 A2 Pmax Model Order no. UP
Germany 06.002.048.3 1 unit
VHP00155
- Suitable for keyboard drawer 01.136.378.1- Flat keyboard with 84 keys and
integrated trackball
Electrical data- Power supply
+5 V/DC max. 18 mA- Mains cable (1.6 m) with tapping for
two 6-pin mini DIN plugs (PS/2)- For Windows 98/ME/NT/2000/XP
DimensionsLength x width x height370 x 138.5 x 20 mm
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
12Thermal Management
12.2 to 12.12
12.1
T H E R M A L M A N A G E M E N T
LUF200521LUF200611
Thermal Management
CoolBlast fan unitStrong points 12.3
CoolBlast fan unit19” Fan Unit 12.4Air Conduction System 12.619” Filter Unit 12.6Fantable 12.7Filter Fan 12.8Temperature Module 12.9Thermostat 12.9
Cooling Units19” Cooling Unit 12.10Cooling Units 12.11
T H E R M A L M A N A G E M E N T
12.2
12.3
T H E R M A L M A N A G E M E N T
The Knürr CoolBlast adjusts itscooling airflow to the power lossof the equipment. The tempera-ture-regulated control of the fanspeed optimises the noise emis-sion and the lifespan of the fans.The maximum reference tempe-rature is set at the front panel.
A fan failure detector ensureshigh operational security.Exceeding the reference temper-ature is also detected in thesame way. The fault signalingcan be connected with the rackmonitoring system, RMS.
A simple thermostat-controlledmodel is also available.
Optimum heat dissipation of thecooled module is attained withthe high airflow volumes andpressure rises in the CoolBlastfan unit. CFD simulations canoptimise each customer thermalmanagement application.
Air guideing components,optional with filter, round offthe product range. The filter matprotects the electronics in useagainst dirt and dust and can bechanged during running operation.
In addition to the CoolBlast fanunit, a number of other compo-nents and accessory parts arealso available for rack thermalmanagement.
5
4
3The constantly increasing of powerlosses of electronic modules makehigh demands on the effectivecooling of electronic modules.Large airflow volumes ensuresecured heat dissipation, wherebyhigher airflow speeds reach thecomponents, which leads to betterheat transfer.
The packing density of the electro-nics in the racks is also increasing.Fans with high pressure rise over-come the resulting higher pressureloss.
The space-saving 1 HU constructionguarantees maximum installationspace for our customers' equipment.
The CoolBlast fan unit fromKnürr is available as fan plug-infor vertical cooling of moduleswith 3 and 6 fans. The airflowrequired for cooling is primarilydetermined by the fan selection.Fans in three different perfor-mance classes are available(Standard, High, and Ultra HighPerformance). Selection can bemade between quiet axial fansand special diagonal fans with anespecially high support rate forcooling air.
To ensure that plenty of coolingair reaches the electroniccomponents, CoolBlast has anIP protective grid with high freecross-section surface. The gridform minimises the pressure lossof the streaming airflow andreduces the streaming noise.
2
1
CoolBlast fan unitStrong points
LUF200562
LUF800014
LUF200543
LUF200685
T H E R M A L M A N A G E M E N T
12.4
CoolBlast fan unitUncontrolled
Name W H D kg n Elec. connection W m3/h Pa dB(A) Order no.
CoolBlast 230V 3-fan 440 43.6 230 3 3 207 ... 253VAC; 50/60Hz 45 495 74 45.2 03.027.001.1
CoolBlast 230V 6-fan 440 43.6 390 6 6 207 ... 253VAC; 50/60Hz 90 990 74 48.8 03.027.002.1
CoolBlast 115V 3-fan 440 43.6 230 3 3 103.5 ... 126.5VAC; 50/60Hz 44 576 88 47.3 03.027.004.1
CoolBlast 115V 6-fan 440 43.6 390 6 6 103.5 ... 126.5VAC; 50/60Hz 88 1152 88 50.8 03.027.005.1
CoolBlast 24V 3-fan SP 440 43.6 230 2.5 3 12 ... 27VDC 23 553 68 49.6 03.027.031.1
CoolBlast 24V 6-fan SP 440 43.6 390 5 6 12 ... 27VDC 46 1106 68 53.3 03.027.032.1
CoolBlast 24V 3-fan HP 440 43.6 230 3 3 12 ... 25VDC 33 711 160 55.8 03.027.034.1
CoolBlast 24V 6-fan HP 440 43.6 390 6 6 12 ... 25VDC 66 1422 160 59.1 03.027.035.1
CoolBlast 24V 3-fan UP 440 43.6 230 3 3 16 ... 26VDC 69 825 310 61.8 03.027.037.1
CoolBlast 24V 6-fan UP 440 43.6 390 6 6 16 ... 26VDC 138 1650 310 65.1 03.027.038.1
CoolBlast 48V 3-fan SP 440 43.6 230 3 3 36 ... 55VDC 23 553 68 49.6 03.027.041.1
CoolBlast 48V 6-fan SP 440 43.6 390 6 6 36 ... 55VDC 46 1106 68 53.2 03.027.042.1
CoolBlast 48V 3-fan HP 440 43.6 230 3 3 36 ... 55VDC 54 826 160 58.6 03.027.044.1
CoolBlast 48V 6-fan HP 440 43.6 390 6 6 36 ... 55VDC 108 1652 160 62 03.027.045.1
CoolBlast 48V 3-fan UP 440 43.6 230 3 3 36 ... 53VDC 69 825 310 61.9 03.027.047.1
CoolBlast 48V 6-fan UP 440 43.6 390 6 6 36 ... 53VDC 138 1650 310 65.3 03.207.048.1
- Fan unit for vertical cooling of modules in19” racks
- Chassis rails are recommended formounting. Chassis rails are required withCoolBlast 6-way.
MaterialSheet steel, high-grade steel grid
Finish / ColourHousing, zinc-passivatedFront panel, powder-coated, smoothin RAL 7035 light-grey
How suppliedAssembled, wired and tested
ApprovalsCE label in accordance withthe low potential guideline 73/23/EWG,EMC guideline 89/366/EWG
Scope of delivery1 CoolBlast fan unit,
packed with operating instructions
NoteOnly with DC devices1 Connection cable, 2 m with connector
plug and free endsAC connection cables not included insupply schedule (see also, page 7.23)
LUF20052
LUF20053
CoolBlast fan unitThermostat-controlled
- Fan unit for vertical cooling of modulesin 19” racks
- Fan function (ON/OFF) thermostat-controlled, setting from 0°C to 60°C
- Chassis rails are recommended formounting. Chassis rails are required withCoolBlast 6-way.
MaterialSheet steel, high-grade steel grid
Finish / ColourHousing, zinc-passivatedFront panel, powder-coated, smoothin RAL 7035 light-grey
How suppliedAssembled, wired and tested
ApprovalsCE label in accordance withthe low potential guideline 73/23/EWG,EMC guideline 89/366/EWG
Scope of delivery1 CoolBlast fan unit,
packed with operating instructions
NoteAC connection cables not included insupply schedule (see also, page 7.23)
Name W H D kg n Elec. connection W m3/h Pa dB(A) Order no.
CoolBlast 230V 3-fan, thermostat 440 43.6 230 3 3 207 ... 253VAC; 50/60Hz 45 495 74 45.2 03.027.011.1
CoolBlast 230V 6-fan, thermostat 440 43.6 390 6 6 207 ... 253VAC; 50/60Hz 90 990 74 48.8 03.027.012.1
CoolBlast 115V 3-fan, thermostat 440 43.6 230 3 3 103,5 ... 126.5VAC; 50/60Hz 44 576 88 47.3 03.027.014.1
CoolBlast 115V 6-fan, thermostat 440 43.6 390 6 6 103,5 ... 126.5VAC; 50/60Hz 88 1152 88 50.8 03.027.015.1
LUF20049
LUF20060
12.5
T H E R M A L M A N A G E M E N T
LUF20059
LUF20061
LUF20073
CoolBlast fan unitSpeed-controlled
- Fan unit for vertical cooling of modulesin 19” racks
- Reference temperature can be set(20°C to 55°C)
- Fan speed regulation 30% to 100%of the nominal speed, with sensor failure100% speed
- Individual fan monitoring- Digital alarm output for excess temperature
alarm and fan failure- Optical status display for O.K.,
excess temperature and fan failure- Acoustic warning - Chassis rails are recommended for
mounting. Chassis rails are required withCoolBlast 6-way.
MaterialSheet steel, high-grade steel grid
Finish / ColourHousing, zinc-passivatedFront panel, powder-coated, smoothin RAL 7035 light-grey
ApprovalsCE label in accordance withthe low potential guideline 73/23/EWG,EMC guideline 89/366/EWG
Scope of delivery1 CoolBlast fan unit,
packed with operating instructions1 Sensor cable, 2 m (plug-in)1 Signal cable, 2 m (plug-in)
NoteOnly with DC devices1 Connection cable, 2 m with connector
plug and free endsAC connection cables not included insupply schedule (see also, page 7.23)
How suppliedAssembled, wired and tested
Name W H D kg n Elec. connection W m3/h Pa dB(A) Order no.
CoolBlast 115/230V, 3-fan, controlled SP 440 43.6 230 3.2 3 100 to 260VAC; 50/60Hz 25 553 68 49.6 03.027.021.1
CoolBlast 115/230V, 6-fan, controlled SP 440 43.6 390 6.2 6 100 to 260VAC; 50/60Hz 50 1106 68 53.3 03.027.022.1
CoolBlast 115/230V, 3-fan, controlled HP 440 43.6 230 3.2 3 100 to 260VAC; 50/60Hz 37 711 173 55.8 03.027.024.1
CoolBlast 115/230V, 6-fan, controlled HP 440 43.6 390 6.2 6 100 to 260VAC; 50/60Hz 74 1422 173 59.1 03.027.025.1
CoolBlast 230/300V, 3-fan, controlled UP 440 43.6 230 3.4 3 190 to 260VAC; 50/60Hz* 76 825 310 61.8 03.027.027.1
CoolBlast 230/300V, 6-fan, controlled UP 440 43.6 390 6.4 6 190 to 260VAC; 50/60Hz* 152 1650 310 65.1 03.027.028.1
CoolBlast 24/48V, 3-fan, controlled SP 440 43.6 230 3.1 3 20 to 60VDC 25 553 68 49.6 03.027.051.1
CoolBlast 24/48V, 6-fan, controlled SP 440 43.6 390 6.1 6 20 to 60VDC 50 1106 68 53.3 03.027.052.1
CoolBlast 24/48V, 3-fan, controlled HP 440 43.6 230 3.1 3 20 to 60VDC 37 711 173 55.8 03.027.054.1
CoolBlast 24/48V, 6-fan, controlled SP 440 43.6 390 6.1 6 20 to 60VDC 74 1422 173 59.1 03.027.055.1
CoolBlast 24/48V, 3-fan, controlled UP 440 43.6 230 3.3 3 20 to 60VDC 76 825 310 61.8 03.027.057.1
CoolBlast 24/48V, 6-fan, controlled UP 440 43.6 390 6.3 6 20 to 60VDC 152 1650 310 65.1 03.027.058.1
* Wide-range feeding on request
Standard Performance = SP n = number of fansHigh Performance = HP W = Power consumption (W)Ultra High Performance = UP m3/h = Air volume stream
Pa = Pressure increaseI nom = Nominal current (A)I max = Residual current (A)P = Power consumption (W)V = Voltage (400V=3-phase)dB(A) = Sound pressure 1 mm
from the rack(600 mm x 600 mm;raised cover)
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
T H E R M A L M A N A G E M E N T
12.6
19” Filter unit, 1 HU/U
W H D kg W n Model Order no. UP
19” 43.6 230 03.027.092.1 1 unit
19” 43.6 390 03.027.093.1 1 unit
- For mounting the filter- For CoolBlast vertical airflow- Use as cooling baffle- For CoolBlast 3-way and 6-way
MaterialSheet steel
Finish / ColourFront panel, powder-coated, smoothin RAL 7035 light-greyFilter support, zinc-passivated
How suppliedAssembled, with filter
LUF00205
Vent Airflow for Front Intake, 1 HU
W H D kg W n Model Order no. UP
19” 43.6 230 03.027.094.1 1 unit
19” 43.6 390 03.027.095.1 1 unit
- For CoolBlast as vent airflow for front intake- Use as cooling baffle- For CoolBlast 3-way and 6-way
MaterialSheet steel
Finish / ColourFront panel, powder-coated,smooth in RAL 7035 light-greyFilter support, zinc-passivated
How supplied1 unit
Replacement Filter
W H D kg W n Model Order no. UP
440 8 230 03.027.098.1 1 unit
440 8 390 03.027.099.1 1 unit
- Replacement filter for CoolBlast filter unit Material1 Filter, filedon P15/150
Front Panel for Front Intake
W H D kg W n Model Order no. UP
19” 43.6 03.027.097.1 1 unit
LUF20068
Filter Unit for Front Intake, 1 HU
W H D kg W n Model Order no. UP
19” 43.6 230 03.027.090.1 1 unit
19” 43.6 390 03.027.091.1 1 unit
- For mounting the filter- For CoolBlast as airflow for front intake- Use as cooling baffle- For CoolBlast 3-way and 6-way
MaterialSheet steel
Finish / ColourFront panel, powder-coated,smooth in RAL 7035 light-greyFilter support, zinc-passivated
How suppliedAssembled, with filter
LUF20067
Standard Performance = SP n = number of fansHigh Performance = HP W = Power consumption (W)Ultra High Performance = UP m3/h = Air volume stream
Pa = Pressure increaseI nom = Nominal current (A)I max = Residual current (A)P = Power consumption (W)V = Voltage (400V=3-phase)
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
12.7
T H E R M A L M A N A G E M E N T
miracel miracel
Ventilation unit miracel Ventilation unit smaract doubleprorack
Replacement fan for: 3 Fans Fan inst. set 6 Fans Ventilation unit Ventilated rear panel
On page:
Article: 03.026.333.9 04.001.194.9 03.210.245.9 04.001.194.9 04.001.193.0
Dimen.: L x W x H 119 x 119 x 25 mm 119 x 119 x 38 mm 119 x 119 x 25 mm 119 x 119 x 38 mm 119 x 119 x 38 mm
Max. volume flow:
Free-blowing: 108 m3/h 160 m3/h 117 m3/h 160 m3/h 160 m3/h
Voltage: 230 V 230 V 230 V 230 V 230 V
Frequency: 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz
Power consumption:
Noise, free-blowing: 34 dB(A) 46 dB(A) 37 dB(A) 46 dB(A) 46 dB(A)
Bearing system: Ball bearing Solid bearing Solid bearing Solid bearing Solid bearing
Nominal speed: 2300 min-1 2650 min-1 2450 min-1 2650 min-1 2650 min-1
Permissible
Environmental temperature: -40 °C to +70 °C -10 °C to +55 °C -20 °C to +70 °C -10 °C to +55 °C -10 °C to +55 °C
Lifespan, L10 at 40°C: 60,000 h 37,500 h 47,500 h 37,500 h 37,500 h
Approvals: CE, UL, CSA, VDE CE, UL, CSA, VDE CE, UL, CSA, VDE CE, UL, CSA, VDE CE, UL, CSA, VDE
Replacement fan for: ConAct Cover CoolBlast CoolBlast CoolBlast CoolBlast
On page:
Article: 04.001.197.0 01.914.070.9 01.914.075.9 01.914.090.9 01.914.071.9
Dimen.: L x W x H 92 x 92 x 25 mm 119 x 119 x 38 119 x 119 x 38 119 x 119 x 38 119 x 119 x 38
Max. volume flow:
Free-blowing: 59 m3/h 184.2 m3/h 237 m3/h 275 m3/h 184.2 m3/h
Voltage: 230 V 24 VDC 24 VDC 24 VDC 48 VDC
Frequency: 50 Hz
Power consumption: 11 W 7.4 W 11 W 23 W 7.7 W
Noise, free blowing: 35 dB(A) 43 dB(A) 59 dB(A) 60 dB(A) 43 dB(A)
Bearing system: Solid bearing Ball bearing Ball bearing Ball bearing Ball bearing
Nominal speed: 2650 min-1 2950 min-1 4400 min-1 6000 min-1 2950 min-1
Permissible
Environmental temperature -20 °C to +80 °C -10 °C to +70 °C -30 °C to +55 °C -20 °C to +65 °C -10 °C to +70 °C
Lifespan, L10 at 40°C: 55,000 h 75,000 h 70,000 h 70,000 h 75,000 h
Approvals: CE, UL, CSA, VDE CE, VDE CE, VDE CE, VDE CE, VDE
Replacement fan for: – 03.027.031.1 03.027.034.1 03.027.037.1 03.027.041.1
03.027.032.1 03.027.035.1 03.027.038.1 03.027.042.1
03.027.021.1 03.027.024.1 03.027.027.1
03.027.022.1 03.027.025.1 03.027.028.1
03.027.051.1 03.027.054.1 03.027.057.1
03.027.052.1 03.027.055.1 03.027.058.1
Replacement fan for:
On page:
Article: 01.914.076.9 01.914.091.9 01.914.050.9
Dimen.: L x W x H 119 x 119 x 38 119 x 119 x 38 119 x 119 x 38
Max. volume flow:
Free-blowing: 275.4 m3/h 275 m3/h 192 m3/h
Voltage: 48 VCD 48 VCD 115 VDC
Frequency: 50 Hz
Power consumption: 17.4 W 23 W 14.5 W
Noise, free blowing: 57 dB(A) 60 dB(A) 41 dB(A)
Bearing system: Ball bearing Ball bearing Ball bearing
Nominal speed: 4200 min-1 6000 min-1 2900 min-1
Permissible
Environmental temperature: -10 °C to +70 °C -20 °C to +65 °C -40 °C to +60 °C
Lifespan, L10 at 40°C: 105,000 h 70,000 h 43,500 h
Approvals: CE, VDE CE, VDE CE, VDE
Replacement fan for: 03.027.044.1 03.027.047.1 03.027.004.1
03.027.045.1 03.027.048.1 03.027.005.1
03.027.014.1
03.027.015.1
T H E R M A L M A N A G E M E N T
12.8
Filter Fan
LxW T/d/x y/z kg max. VS Elec.conn. L G N Ld/40º Model Order no. UP
150x150 71/120/5 125/131 0.812 57 m3/h 230V / 50/60Hz 20 W 43 dB(A) 2650/min 40,000 h Filter fan 03.026.501.9 1 unit
204x204 90/120/5.7 177/185 1 90 m3/h 230V / 50/60Hz 20 W 43 dB(A) 2650/min 40,000 h Filter fan 03.026.502.9 1 unit
250x250 113/172/6 223/230 1.690 240m3/h 230V / 50/60Hz 29 W 50 dB(A) 2800/min 40,000 h Filter fan 03.026.503.9 1 unit
325x325 125/208/7 291/302 3.620 520m3/h 230V / 50/60Hz 67 W 63 dB(A) 2770/min 50,000 h Filter fan 03.026.504.9 1 unit
150x150 24/5 125/131 0.140 Exit filter 03.026.511.9 1 unit
204x204 20.5/5.7 177/185 0.275 Exit filter 03.026.512.9 1 unit
250x250 25/6 233/230 0.440 Exit filter 03.026.513.9 1 unit
325x325 26/7 291/302 0.780 Exit filter 03.026.514.9 1 unit
150x150 Replacement filter mat 03.026.521.9 6 unit
204x204 Replacement filter mat 03.026.522.9 6 unit
250x250 Replacement filter mat 03.026.523.9 6 unit
325x325 Replacement filter mat 03.026.524.9 6 unit
- For specific use with hot spots- Also suitable for later mounting, quick
and easy- The filter mats provide high filtering-out
properties, are easily exchanged and canbe cleaned
- The fans do not require maintenance andtheir value is especially emphasised bytheir long lifespan and low noise factor
- Airflow: blowing in the rack (pre-setting)- Can be used as blowing-out or taking-in
MaterialHeat-resistant ABS plastic,UL 94 V-0
ColourRAL 7035, light-grey
ApprovalsCE Symbol
Protection ratingIP 54
LUF80011 LUF80012
LUF800040
LUF20057
LUF20058
Standard Performance = SP n = number of fansHigh Performance = HP W = Power consumption (W)Ultra High Performance = UP m3/h = Air volume stream
Pa = Pressure increaseI nom = Nominal current (A)I max = Residual current (A)P = Power consumption (W)V = Voltage (400V=3-phase)
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
12.9
T H E R M A L M A N A G E M E N T
LUF20000
Thermostat
W H D LxW kg W n Model Order no. UP
01.113.384.3 1 unit
- For controlling the inside temperature ofthe rack in conjunction with fan units andheating fans
- Setting range: +10°C ... +60°C)- Switching temperature difference
(hysteresis) 2K- Contact type: 1 changeover contact- Sensor: thermostatic bimetal- Contact rating: 230 VAC/10 A (heating),
5 A (cooling)- Interference suppression: in accordance
with DIN 55014
MaterialPlastic
Protection ratingIP 30
ApprovalsCE Label in accordance with the lowpotential guideline 73/23/EWG,EMC guideline 89/336/EWG
Dimensions74 x 74 x 23 mm
Supply schedule1 Thermostat1 Mounting bracketMounting material
LUF00237a
LUF00256
Temperature Module
W H D LxW kg W n Model Order no. UP
01.117.525.1 1 unit
- For monitoring the inside temperatureof the rack
- Temperature display (+ 10°C... +70°C)- Setting the alarm temperature via frontal
potentiometer- Optical alarm display (LED red)- Alarm signaling via floating switching
contact (1 changeover contact 250 VAC / 8 A)- Power supply 230 V / 50Hz
MaterialPlastic
ApprovalsCE Label in accordance with the lowpotential guideline 73/23/EWG,EMC guideline 89/336/EWG
Supply schedule1 Temperature module1 Temperature sensor (3 m)
How suppliedAssembled, wired and tested
19” Front Panel 1 HU for Temperature Module
W H D LxW kg W n Model Order no. UP
01.117.526.1 1 unit
- For installing the temperature module
Material / FinishSheet steel 1.5 mm, powder-coated
ColourRAL 7035, light-grey
Supply schedule1 19” Front panel
Mounting for Temperature Module
W H D LxW kg W n Model Order no. UP
01.117.527.0 1 unit
- For non-standard installation of temperaturemodule, e.g. laterally on the 19” extrusion
Material / FinishAluminium, 2 mm, polished
Supply schedule1 MountingMounting material
How suppliedFlat packed kit
LUF00255
T H E R M A L M A N A G E M E N T
12.10
19” Cooling Unit, 6 HU 1000 W
W H D kg W Model Order no. UP
482.6 265.9 570 45 1000 03.032.300.1 1 unit
- Service-free operation with patentedconstruction without filter
* High cooling performance with compactconstruction
- CFC-free refrigerant, R 134a- Even temperature distribution in the rack
MaterialHousing, high-grade steelFront panel, aluminium, 3 mm
FinishFront panel, powder-coated textureRAL 7035, light-greyHandle, powder-coated texture,RAL 5008, grey-blue
ApprovalsCE
Supply scheduleCooling unitMains cableOperating instructions
Technical dataElectrical connection valuesNom. voltage: 230 VNom. frequency: 50 HzNominal current: 4.5 AIn rush current: 9 APower consumption: 850 W
Installation Set for 19” Cooling Unit
W H D kg W For rack type Order no. UP
600 800 miracel 01.131.610.1 1 set
800 800 miracel 01.131.612.1 1 set
- With PG screw fittings for cable routing
FinishPowder-coated texture,RAL 7035 light-grey
Supply schedule1 Bottom cover1 Connection board, 9 HU2 Chassis railsMounting material
How suppliedFlat packed kit
NotePlease order a rear door shortenedby 9 HU. Installation of this set is notpossible in a rack with plinth!
LUF20002
LUF00114
LUF00249
LUF00213b
Power dataEffective cooling output, L35L35: 1000 WAir flow internal loop:
max. 360 m3/h, speed-controlledAir flow external loop:
max. 720 m3/h, speed-controlledTemperature range:
+20°C to +55°CRefrigerant: R134 a (CFC-free)Protection rating: IP 44Weight: 45 kg)Noise level: 70 dB (A) at 1 m
with max. air output
Output signals(microcontroller functions):Reference and alarm temperaturecan be set per potentiometerAlarm output per relay(digital contact)Floating door contact switch as breakcontactPreconnectable test mode
12.11
T H E R M A L M A N A G E M E N T
Cooling UnitWall mounting and wall installation
W H D kg W I nom I max P Fuse Order no. UP
395 980 135 39 820 2.7 13 600 10A 03.032.302.1 1 unit
395 1550 135 50 1400 4 18 900 10A 03.032.304.1 1 unit
395 1550 220 80 2000 7 30 1600 16A 03.032.305.1 1 unit
525 1550 225 95 2600 3x2.7 18 1130 3x6A 03.032.307.1 1 unit
- Service-free operation with patentedconstruction without filter
- For mounting on rear panel, rear dooror side panel of rack
- Sunken installation possible- No loss of 19” installation space- Temperature regulation using microcontroller- CFC-free refrigerant, R 134a- No danger to your electronic components
from dirt buildups and spray water:IP 55 rack
- Even temperature distribution in the rack
MaterialHousing, sheet steel
Finish / ColourHousing, powder-coated texture,RAL 7035, light-grey
ApprovalsCE, UL; CSA
Supply schedule1 Cooling unit
Mounting materialOperating instructions
Technical data- Mains voltage: 230V
/400V 3 ~ with 2600W cooling power- Mains frequency: 50Hz/60Hz- Temperature range:
+20°C to +55°C- Refrigerant: R134a (CFC-free)- Protection rating: IP54- Sound pressure at 1 m distance: 65dB(A)
Output signals(microcontroller function)- Reference temperature
(internal rack temperature)can be set between 20°C and 50°C
- Excess temperature alarm(can be set between 25°C and 55°C)
- Alarm output via relay(changeover contact)
- Door contact switch- Test mode switch
LUF20014
Standard Performance = SP n = number of fansHigh Performance = HP W = Power consumption (W)Ultra High Performance = UP m3/h = Air volume stream
Pa = Pressure increaseI nom = Nominal current (A)I max = Residual current (A)P = Power consumption (W)V = Voltage (400V=3-phase)
LUF20016 LUF20017
LUF20070LUF20071
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
LUF20072
LUF20076
T H E R M A L M A N A G E M E N T
12.12
LUF20004
Cooling Unit, Top-mounting
- Service-free operation with patentedconstruction without filter
- For mounting on rear panel, rear dooror side panel of rack
- Sunken installation possible- No loss of 19’’ installation space- Temperature regulation using microcontroller- CFC-free refrigerant, R134a- No danger to your electronic components
from dirt buildups and spray water:IP 55 rack
- Even temperature distribution in the rack
MaterialHousing, sheet steel
FinishHousing, powder-coated texture,RAL 7035, light-grey
ApprovalsCE, UL, CSASupply scheduleCooling unit
Mounting materialOperating instructions
Technical data- Mains frequency: 50Hz/60Hz- Temperature range:
+20°C to +55°C- Refrigerant: R134a (CFC-free)- Protection rating: IP54- Sound pressure at 1 m distance: 65dB(A)
Output signals(microcontroller function)- Reference temperature
(internal rack temperature)can be set between 20°C and 50°C
- Excess temperature alarm(can be set between 25°C and 55°C)
- Alarm output via relay(floating changeover contact)
- Floating door contact switch- Test mode switch
LUF20013
Door Contact Switch
W H S HU/U h d b Model Order no. UP
01.110.722.9 1 unit
ELM00137
- On/off switch, 4 A, 230 V ~- Activation with opening and closing
of the door
Supply schedule1 Door contact switch (not wired)1 Mounting bracketMounting material
W H D kg W I nom I max P Fuse Order no. UP
600 400 400 55 1100 4 15 800 10A 03.032.310.1 1 unit
600 400 400 55 2000 7 33.5 1600 10A 03.032.312.1 1 unit
575 460 760 80 3000 3.8 20 2000 3x6A 03.032.314.1 1 unit
Standard Performance = SP n = number of fansHigh Performance = HP W = Power consumption (W)Ultra High Performance = UP m3/h = Air volume stream
Pa = Pressure increaseI nom = Nominal current (A)I max = Residual current (A)P = Power consumption (W)V = Voltage (400V=3-phase)
Dimensions in mm: W = Width HU = Standard height unitH = Height 1 HU = 44.45 mmD = Depth UP = Unit of packagingh = Installation height kg = Weightd = Useable depthL = Length = Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
13TechnicalSection 13.2 to 13.7
13.1
T E C H N I C A L S E C T I O N
TechnicalSection
Communication/Data Networks
Structure 13.2Components 13.3Standards / Specifications 13.4Areas of Application 13.10Technical Abbreviations 13.13
Hierarchical structure of the universal cabling (in accordance with prEN 50173:2001)
Transmission path (in accordance with prEN 50173:2001)
Communication/Data Networks
Cabling areas (in accordance with prEN 50173:2001)
SD: Site Distributor miracelBD: Building Distributor miracel, smaractFD: Floor Distributor miracel, smaract, ConActSC: Subscriber Connection SOHO
Communication/data network structure
Application-neutral cabling-systemsIn accordance with EN 50173,ISO/IEC 11801
Sub-system of theprimary cabling
Sub-system of thesecondary cabling
Sub-system of thetertiary cabling
Sub-systemprimarycabling
Sub-systemsecondarycabling
Sub-systemtertiarycabling
Equipmentconnectioncabling Terminal device
T E C H N I C A L S E C T I O N
13.2
13.3
T E C H N I C A L S E C T I O N
Small Office Home Office (SOHO)In accordance with Draft ISO/IEC 15018
Setup and operation ofcommunications cablingIn accordance with EN 50174
Communication/Data Network Components
Modular setup in four levels (in accordance with DIN 41494, supplement 1:1992)
External and internal dimensions for racks and frames(in accordance with DIN 41494, supplement 1:1992)
Level 4Mounting
Level 3Modularchassis
Level 2Modules
Level 1ComponentsParts
Equipotential Bonding andEarthingIn accordance EN 50310, VDE 0100-444
• Structure for electronic installations:25 mm constructionEN/IEC 60917
Classification oftransmission pathsIn accordance with prEN 50173:2001
• Symmetrical cablingClass A up to 100 kHzClass B up to 1 MHzClass C up to 16 MHzClass D up to 100 MHzClass E up to 250 MHzClass F up to 600 MHz
• Fibre optic cablingClass OF-300 Transmission path,
min. 300 m)Class OF-500 Transmission path,
min. 500 m)Class OF-2000 Transmission path,
min. 2,000 m)Cable and plug connector
• Communication cableEN 50288, 50289, 50290IEC 61156 (symmetrical cable)EN 60794 (fibre optic cable)
• Plug connector for symmetrical cableEN 60603, IEC 61076
• Plug connector for fibre optic cableEN 60874, IEC 60874
Equipment and systems
• Structure for electronic installations:482.6 mm (19”) constructionDIN 41494, EN/IEC 60297
T E C H N I C A L S E C T I O N
13.4
Standards and Specifications
Protection ratings accordingto racks/enclosures (IP code)EN/IEC 60529
EMC emitted interference andEMC interference immunity
EN 61000/55011/55022Protection of electronic equipmentand systems against electro-magneticdisturbances.The shielding protects against both thedanger of electro-magnetic disturbancesfrom outside and the outward emissionof electro-magnetic energy.The shielding requires detailed know-howand comprehensive experience.
• Attention must be paid to:- EMC-compatible construction- Highly conductive surfaces- Material combinations with low potential
difference- Low-impedance material connections- Seals- EMC cable entry
Shielding measures on, for example, primusmodular chassis:
• Surfaces- Highly conductive zinc-passivated sheet
steel
– Shielding and optimum ventilation withcorresponding perforation
– Excellent contact points on side panelsto top cover/bottom cover
– The contact points of the front panelsand rear panel on the modular chassisare made via the EMC spring.
AD E
F
H
G
B
C
BGT00085
First Foreign matter Seconddigit Contact protection protection digit Water protection
0 No special protection 0 No specialprotection
1 Against large Large foreign 1 Against verticallymatter body matter, falling drop
diameter water› 50 mm
2 Against finger or Medium-size foreign 2 Against drop watersimilar size body matter, falling at anobjectives diameter angle
› 12 mm (up to 15° deviation from the vertical)
3 Against tools, wires, Small foreign 3 Against spray waterand similar with body matter, (any direction up toa thickness of diameter 60º deviation from› 2.5 mm › 2.5 mm the vertical)
4 Against tools, wires, Grain shape 4 Against spray waterand similar with foreign matter from all directionsa thickness of diameter› 1 mm › 1 mm
5 Complete Dust protected; 5 Against spray waterprotection dust buildups from a nozzle
are permissible, from all directionsbut their amount may not endangerthe function of theequipment.
6 Completeprotection Dust-proof 6 Against flooding
7 Against immersion
8 Against submersion
13.5
T E C H N I C A L S E C T I O N
Heat TransferVDE 0660 Part 507, procedure fordetermining heat buildup,(identical to IEC 60890)
LUF00083
LUF00087
Definition via chart (alternative)
P0 = k x A x (Ti – Te) (W)
- P0 Dissipation transferred through racksurface
- c Heat transmission coefficient ~ 5 W/m2 K- A Effective rack surface- Ti Internal rack temperature- Te Environmental temperature- ∆T = Ti - Td (K) Temperature difference- P0 › 0 : Heat release- P0 › 0 : Heat absorption
Examplec = 5 W/m2 K (sheet steel)A = 5.38 m2
Ti = 40º CTd = 20º C
P0 = 5 x 5.38 x (40 – 20) = 538 W
5 Heat transfer options are availabledepending on the value of the power loss.Selection and dimensioning are made takingconsideration of the framework conditions inaccordance with the installation site(IP protection, noise level, room size andthermal management, etc.) into account.
1. Through rack surface
Individual enclosure, free-standingA = 1.8xHx(W+D) + 1.4xWxD
Individual enclosure forwall mountingA = 1.4xHx(W+D) + 1.8xWxD
Start-end enclosure,free-standingA = 1.4xDx(H+W) + 1.8xWxH
Start-end enclosure,for wall mountingA = 1.4xHx(W+D) + 1.4xWxD
In-between enclosure,free-standingA = 1.8xWxH + 1.4xWxD + DxH
In-between enclosure forwall mountingA = 1.4xWx(H+D) + DxH
In-between enclosure forwall mounting with coveredtop surfaceA = 1.4xWxH + 0.7xWxD + DxH
Enclosure configuration in accordance with IEC 60890
W = Control rack widthH = Control rack heightD = Control rack depth
Calculation of the effective rack surface
P0 (W)
A (m2)
∆T
T E C H N I C A L S E C T I O N
13.6
2. Direct heat exchange using fans
Calculation of the required air volumestream
V = f (a) x Pl / ∆T (m3/h)
- V Required air volume stream- Pl Power dissipation in the rack- Ti Internal rack temperature- Te Environmental temperature- ∆ T = Ti - Te (K) Temperature difference, Ti › Te
- fa Auxiliary factor
ExamplePL = 1500 WTi = 35º CTe = 25º Ca = 1000 m
V = 3.5 x 1500/(35 – 25) = 525 m3/h
LUF00075 LUF00075
LUF00088
Definition via chart
3. Air-to-air heat exchanger
Calculation of the required cooling output
QC = Pl – PD (W)
- QC Required cooling output of the heatexchanger
- PL Power dissipation in the rack- PD Dissipation through rack surface
ExamplePL = 1300 WPD = 538 WTi = 40º CTe = 20º C (Ti › Te)A = 5.38 m2
QC = 1300 – 538 = 762 W
LUF00080
V (m3/h)
Pl (W)
∆T
h to f ratio
h (m) f (m3k/wh)
0-100 3,1
100-250 3,2
250-500 3,3
500-750 3,4
750-1000 3,5
13.7
T E C H N I C A L S E C T I O N
i.e., the device is sufficiently dimensionedfor the abovementioned use
LUF00089
As defined by chartQC = - 1200 W
4. Cooling unit with cooling agent
Calculation of the required cooling output
QC = Pl – PD (W)
- QC Required cooling output of the coolingunit
- PL Power dissipation in the rack- PD Dissipation through rack surface
Special caseAs in this case Ti = Te › Ti is possible, theheat dissipation PD can become negative
Examplec = 5 W/m2 KA = 5.38 m2
Ti = 30º CTe = 35º CPL = 500 W
PD = k x A x (Ti – Te) = – 134.5 WQc = PL – PD = 500 – (– 134.5) = 634.5 W
LUF00080LUF00082
d.h. the device is sufficiently dimensionedfor the abovementioned use
LUF00090
As defined by chartQC = -800 W
Qc (W)
Td (°C)
Qc (W)
Td (°C)
Ti
Ti
T E C H N I C A L S E C T I O N
13.8
Calculation of the required cooling output
QC = Pl – PD (W)
- QC Required cooling output of the heatexchanger
- PL Power dissipation in the rack- PD Dissipation through rack surface
Special caseAs in this case Ti = Te › Ti is possible, theheat dissipation PD can become negative
Examplec = 5 W/m2 kA = 5.38 m2
PL = 1000 WTi = 30º CTe = 35º C
PD = k x A x (Ti – Td) = – 134.5 WQc = PL – PD = 1000 – (– 134.5) = 1134.5 W
Ti = 30º CTe = 35º)TW = 15º C
Environmental temperature does nothave any influence on the cooling output ofthe air/water heat exchanger. It does,however, on the water temperature, TW.
LUF20066
5. Air-to-water heat exchanger
d.h. the device is sufficiently dimensionedfor the above mentioned use
LUF00091
As defined by chartQC = -1500 W
Qc (W)
TW (°C)
Ti
13.9
T E C H N I C A L S E C T I O N
Fire Behaviour
• FlammabilityUL 94, The Standard for Flammability ofPlastic Materials for Parts in Devices andApplications harmonised with IEC 60607,60695-11-10, 60695-11-20, ISO 9772 and9773
• Ignition Resistance UL 746A, TheStandard for Polymeric Materials, similarto IEC 60112, 60695 and 60950.
Wire mesh
ca.45°
Wire mesh
Test piece
FTI20F
100 ± 1mm
25 ± 1mm
45 ± 2°
10 ± 1 mm
Setup for determining horizontal and vertical fire behaviour
Horizontal fire behaviour Vertical fire behaviour
Test piece
100 ± 1mm20 ± 1 mm
300 ± 10 mm
6 mm max.
ca. 50 mm
Cotton
Bunsen burner
Main criteria for foam material: Main criteria:
HBFBurning speed not › 40 mm / min. over100 mm burn length; self-extinguishingbefore the 125 mm mark
• Fire load in escape/rescue routesVDE 0108Fire load in escape/rescue routesmax. 7 kWh/m2, with use of halogen-freethermowells and cables (VDE 0250, 0266)with improved fire behaviour, 14 kWh/m2
HF-1 HF-2
Afterburn time 80% ‹2s ‹2s
100% ‹10s ‹10s
Afterglow time ‹30s ‹30s
Burning dripping no allowed
• Classifications in acc. with UL 94Vertical: Six classes for materials
that are frequently used inenclosures, structuralcomponents and insulation:5VA, 5VB, V-0, V-1, V-2, HB.Three classes for thin films:VTM-0, VTM-1, VTM-2
Horizontal: Three classes for foammaterial: HF-1, HF-2, HBF
V-0 V-1 V-2
Afterburn time ‹10s ‹30s ‹30s
Total burn time ‹50s ‹250s ‹250s
Burning dripping no allowed
T E C H N I C A L S E C T I O N
13.10
Mains application Source Date Other names Comm.
Class A for symmetrical cable (up to 100 kHz defined)
PBX National requirements
X.21 ITU-T Recommendation X.21 1984 ISDN basic connection(physical layer)
V.11 ITU-T Recommendation X.21 1984 ISDN basic connection(physical layer)
Class B symmetrical cable (up to 1 MHz defined)
S0 bus (extended) ITU-T Recommendation 1.430 1993 ISDN basic connection(physical layer)
S0 Point-to-Point ITU-T Recommendation 1.430 1993 ISDN basic connection(physical layer)
S1/S2 ITU-T Recommendation 1.431 1993 ISDN primary multiplexes(physical layer)
CSMA/CD 1BASE5 ISO/IEC 8802-3 1996 Star Lan
Class C for symmetrical cable (up to 16 MHz defined)
CSMA/CD 10Base-T ISO/IEC 8802-3 1996 Ethernet
CSMA/CD ISO/IEC 8802-3 1997 Fast Ethernet100BASE-T4
CSMA/CD ISO/IEC 8802-3 1997 Fast Ethernet100BASE-T2 ISO/IEC 8802-3 1997 Fast Ethernet
Token Ring 4 Mbit/s ISO/IEC 8802-5 1998
ISLAN ISO/IEC 8802-9 1996 Integrated Services LAN
ISLAN16-T ISO/IEC 8802-9 DAM 1 1997 Isochronous Ethernet
Demand Priority ISO/IEC 8802-12 1998 VGAnyLAN
ATM LAN 25.60 Mbit/s ATM Forum af-phy-0040.000 1995 ATM-25/Category 3
ATM LAN 51.84 Mbit/s ATM Forum af-phy-0018.000 1994 ATM-52/Category 3
ATM LAN 155.52 Mbit/s ATM Forum af-phy-0047.000 1995 ATM-155/Category 3
Class D for symmetrical cable (up to 100 MHz defined)
CSMA/CD ISO/IEC 8802-3 1997 Fast Ethernet100BASE-TX
Token Ring ISO/IEC 8802-5t 1999 High Speed Token Ring100 Mbit/s
CSMA/CD ISO/IEC 8802-3 1999 Gigabit Ethernet1000BASE-T
Token Ring 16 Mbit/s ISO/IEC 8802-5 1998
TP-PMD ISO/IEC FCD 9314-10 2000 Media-dependentphysical layer fortwisted pairs
ATM LAN 155.52 Mbit/s ATM Forum af-phy-0015.000 1994 ATM-155/Category 5
Areas of application
Supported mains applicationsFor symmetrical copper cabling(in acc. with prEN 50173:2001)
13.11
T E C H N I C A L S E C T I O N
Supported mains applicationsfor fibre optic cabling (in acc. with EN 50173-1:2002)
ISO/IEC 8802-3: FOIRL 2) 9.0 (3.3) - - OF-500 OF-500 OF-500ISO/IEC 8802-3: 10BASE-FL, FP & FB 2) 12.5 (6.8) - - OF-2000 OF-2000 OF-2000ISO/IEC TR 11802-4: 13.0 (8.0) - - OF-2000 OF-2000 OF-20004 & 16 Mbit/s Token Ring 2)
ISO/IEC 8802-12: Demand Priority 2) 7.5 (2.8) 7.0 (2.3) - OF-500 OF-500 OF-500 OF-2000ATM with Mbit/s 3) N/A 10.0 (5.3) 10.0 OF-2000 OF-2000 OF-2000 OF-2000ATM with Mbit/s 3) 7.2 10.0 (5.3) 7.0 OF-500 OF-2000 OF-500 OF-2000 OF-500 OF-2000 OF-2000ATM with Mbit/s 2) 3) 4) 4.0 6.0 (2.0) 7.0 OF-300 OF-500 OF-300 OF-500 OF-300 OF-500 OF-2000DIS 14165-111: Fibre Channel (FC-PH) NA 6.0 - OF-2000 OF-2000 OF-2000with 133 Mbit/s 2)
DIS 14165-111: Fibre Channel (FC-PH) 12.0 6.0 (5.5) 6.0 OF-2000 OF-2000 OF-2000 OF-2000 OF-2000 OF-2000 OF-2000with 266 Mbit/s 3)
DIS 14165-111: Fibre Channel (FC-PH) 8.0 - 14.0 OF-500 OF-500 OF-500 OF-2000with 531 Mbit/s 3)
DIS 14165-111: Fibre Channel (FC-PH) 4.0 - 6.0 OF-500 OF-500 OF-500 OF-2000ISO/IEC 8802-3: 1000BASE-SX 4) 2.6 (3.56) - - 7 OF-500 OF-500ISO/IEC 8802-3: 1000BASE-LX 3) 4) - 2.35 4.56 OF-500 OF-500 OF-500 OF-2000ISO/IEC 9314-9: FDDI LCF-PMD 2) - 7.0 (2.0) - OF-500 OF-500 OF-500ISO/IEC 9314-3: FDDI PMD 2) - 11.0 (6.0) - OF-2000 OF-2000 OF-2000ISO/IEC 9314-4: FDDI SMF-PMD 3) - - 10.0 OF-2000ISO/IEC 8802-3: 100BASE-FX 2) - 11.0 (6.0) - OF-2000 OF-2000 OF-2000IEEE 802.3: 100BASE-LX4 6) 2.0 2.0 6.2 OF-300 OF-300IEEE 802.3: 10GBASE-ER/EW 3) 6) - - 10.9 OF-2000IEEE 802.3: 10GBASE-SR/SW 6) 1.60 (OM1, - - OF-300
62.5 µm)1.80 (OM2,50 µm)2.60 (OM3)
IEEE 802.3: 10GBASE-LR/LW 3) 6) - - 6.2 OF-2000
1) The values apply for both 50/125 µm fibres andfor 62.5/125 µm fibres; with different valuesthe numbers in brackets apply for 50/125 µmoptic fibre cables.
2) The length of the transmission path can berestricted with 50 µm fibres. For details seethe corresponding mains application standard.
3) The length of the transmission path can begreater with single-mode fibres, howeverthis is not in the area of application of thisstandard. For details see the correspondingmains application standard.
4) The given transmission path lengths resultin a mains application with limited bandwidth.Use of components with lower attenuation forcreating transmission paths that exceed thegiven values is not to be recommended.
5) Not guaranteed by the mains applicationstandard.
6) Mains application being developed.7) Length of transmission path depending on
application Cas in Table E. 4, EN 50173-1:2002
Mains application Optical transmission budget (dB) Transmission path in acc. with EN 50173-1 supported byMulti- Multi- One- OM1- OM2- OM3- OS1-mode 1) mode 1) mode optic fibre optic fibre optic fibre optic fibre850 nm 1300 nm 1310 nm 850 nm 1300 nm 850 nm 1300 nm 850 nm 1300 nm 1310 nm 1550 nm
T E C H N I C A L S E C T I O N
13.12
• Components- Servers- Mass storage systems- Patch panels- Fibre optic distributor (splice box)- UPSs- Large cable volumes- Telecommunication and data
communication equipment
• Essential features/criteria- Dimensions- Height units- Cable management
• Rack/enclosure requirements- Heavy-duty shelves- Pull-out shelves- Cooling/ thermal management
MIR00383
Tertiary Area / Floor or Office Distributor(installation site generally in office environment)
• Components- Patch panels
• Essential features- Design- Safety- Noise generation- Mobility
• Enclosure requirements- Easy assembly/mounting- Accessibility
SMA20019
Quality, Environment, Safety
TÜV QM Certificate, DIN EN ISO 9001
TÜV UM Certificate, DIN EN ISO 14001
Service / Support
• Our customers’ requirementsare always the focus of our work. Whichmeans that, on request, we deliver abuilding block-designed accessory range,support the user with professionalassembly and provide customer-specificsupport.
• The advantage!Our customers can fully concentrateon their application.
SON00012 SON20038
Primary and Secondary AreaSite and building distributors and data centres
13.13
T E C H N I C A L S E C T I O N
1 HU One height unit 44.45 mm3 HU Three height units 3x 44.45 mmACR Attenuation to Crosstalk Ratio ANSI American National Standard InstituteATM Asynchronous Transfer ModeATT AttenuationAWG American Wire GaugeBit/s Bits per secondCATV Community Antenna TelevisionCCITT International Telegraph and Telephone Consultative Committee.CSMA/CD Carrier Sense Multipie Access with Collision Detectioncu CopperWP Wire pairdB DecibelDCE Data Circuit Equipment DIN Deutsches Institut für Normung e.V. (German standardisation institute)DTE Data Terminal EquipmentEC Earth ConductorEMI Electromagnetic InterferenceEMC Electro-Magnetic CompatibilityEN CENELEC StandardFD Floor DistributorFDDI Fiber Distributed Data InterfaceFTTD Fiber To The DeskFTTO Fiber To The OfficeFITL Fiber In The LoopFTP Foiled Twisted PairBD Building DistributorHz HertzIEC International Electrotechnical CommissionISDN Integrated Services Digital NetworklSO International Standards OrganizationLAN Local Area NetworkLCL Longitudinal Conversion LossSSISF Solder, Screw, Insulation Strip-FreeFO Fibre OpticMAC Media Access ControlMAU Multi Access UnitEIA Electronics Industries AssociationN NewtonNEXT Near End CrosstalkNT Network Terminator OE Operating EarthOF Optical FiberPE Protective EarthSOHO Small Office / Home OfficeSTP Shielded Twisted PairSD Site DistributorITS IT SocketTDR Time Domain ReflectometerRL Return LossTE Terminal EquipmentTPPMD Twisted Pair Physical Layer Medium DependentTPDDI Twisted Pair Distributed Data Interface.PBX Private Branch ExchangeUL Underwriters Laboratories Inc. (publisher of standards in the U.S.A)UTP Unshielded Twisted PairWAN Wide Area NetworkWI Wave Impedance
Technical Abbreviations
S E R V I C E S E C T I O N
It really is almost totally unimportant where you happen to be on the face of the earth! If you wantto let yourself be impressed by the Knürr Group range of product and services, numerous platformsare always available at your fingertips. Internationally represented in 32 countries world-wide andwith domestic companies and overseas affiliates, we are strategically best positioned for you and yourrequirements.
On the Internet at www.knuerr.com, in addition to current newsand updates, you will find our entire product range, includingtechnical data, press releases and background information andspecialist articles. Knürr product experts are always present atnumerous national and international trade fairs to answer yourquestions and provide you with specialist advice.
If you want to implement your workstation systems with theKnürr Group, we’re ready and waiting to come to you!
Want to get to knowus better?We are always justa click away.
www.knuerr.com
13.14
13.15
I N D E X
@Lock 10.9@lock Desktop Reader 10.13@lock Junction Box 10.12@lock Server 10.12@lock Software Programme 10.13@lock Swing Handle 10.113 Phase GST18i5 plug-in systems 7.193-Phase socket strips 7.7
7.193-Phase UPS systems 8.25-Pin connection 7.7
7.19
A
Access control 10.6Accessories 6.1Active racks 1.35Adapter front panel, 19” for RMSCompact 10.4Analogue KVM switch 10.17ASP rack 1.35Assembly crossbar 5.9Axial fan 12.2AC Power Monitoring 10.6
B
Base fixing, doubleprorack 3.11Base fixing, miracel 1.17Base fixing, smaract 2.12Basic rack, miracel 1.12Battery modules 8.6
8.98.13
Bellcore rack 1.56Blackline socket strips 7.41Blanking panel 6.16Blanking panel, 10” 4.13Blanking panel, 19” 6.16Bottom cover, ConAct 4.8Bottom cover, miracel 1.26Bottom cover, smaract 2.10Brush strip, cover, miracel 1.31
C
Cable cantilever girder 5.256.7
Cable clamping frame 5.25Cable clamping frame 5.26Cable clamping rail, ConAct 4.8Cable clamping strip 5.12Cable clamping, swing frame 5.26Cable clips 2.26Cable duct 5.27Cable duct, on the side 5.15Cable junction box 9.4Cable management 5.1Cable ports 9.3Cable roller 5.26Cable routing board 5.5Cable routing board, 10” 4.13Cable routing panel 5.6Cable routing panel, 10” 4.13Cable routing ring 5.23Cable routing set 5.23Cable routing strut 5.7Cable tie clip 5.24Cable tray, miracel W700 1.45Cable trough between racks 5.13Cable trough 5.8Cable trough, 19” 5.13Cables for KVM 10.13
10.15
Cables for socket strips 7.197.237.34
Cabling 5.1Caged nut 6.28Cascading 5.8Castors, doubleprorack 3.12Castors, miracel 1.25Castors, smaract 2.12Chassis rail, hook-on 6.15Chassis rail, screw-on 6.14Chassis rail, swing frame 6.14CIM 10.21
10.2410.28
Circuit breaker, socket strips 7.107.267.37
Classic DI-STRIP 7.8Cleaner DI-STRIP 7.12
7.187.28
Colocation rack, miracel 1.48Combi lock 10.14Combi lock, miracel 1.48Combi sensor 10.5CommandCenter 10.40Compact rack, 19”, smaract 2.1ConAct 4.1Connection panel, doubleprorack 3.9Connection cables 7.20
7.237.34
Console switching system 10.11Contact clamp 9.5Contact clamp, SOHO 4.12Controlled remote opening 10.7CoolBlast 12.2Cooling unit with cooling agent 13.7Cooling unit 12.10Cooling 12.1CoolTherm 1.51Cover extrusion for miracel rack suite 1.13Cover, ConAct 4.8Cover, miracel 1.30Cover, smaract 2.10C-shaped runner 5.10Cylinder lock, miracel 1.27
1.49
D
Design doors 1.18Design expertise 1.18Diagonal fan 12.2Digital KVM switch 10.17Display drawer, 1 HU 11.19Distribution box 9.2Distribution rack, miracel 1.1DI-STRIP Combi 7.16
7.32DI-STRIP Compact 7.9Document holder 6.19Dominion KSX 10.34Dominion KX 10.28Dominion SX 10.32Door contact sensor 10.6Door contact switch 9.4
11.12Door snib, miracel 1.23Door stop, miracel 1.23Doors, miracel 1.21Double conversion technology 8.3Double doors, miracel 1.21
1.23doubleprorack 3.1doubleprorack 6.27
Drawer 6.96.10
Drawer, TFT 11.1
E
Earthing bar 9.5Earthing bar, SOHO 4.12Earthing bracket 5.26Earthing set, ConAct 4.8Earthing set, doors, miracel 1.27Earthing set, doubleprorack 3.10Earthing set, miracel 1.27Earthing set, SOHO 4.11Earthquake rack 1.56Electro-mechanical components 9.1Electronic locking 10.6EMC emitted interference 13.4EMC interference immunity 13.4Emergency off socket strips 7.11
7.27Enclosures, 19” 2.1
3.14.1
Equipment rack, miracel 1.11Equipotential bonding bar 9.5Euro socket system, socket strips 7.7
7.187.21
EXB module, UPS 8.68.98.13
Excess cable storage 5.16Express item 7.42Extension kit, miracel 1.50Extrusions, ConAct, 19” 4.7Extrusions, doubleprorack, 19” 3.7Extrusions, miracel, 19” 1.14Extrusions, smaract, 19” 2.8Eyebolts, doubleprorack 3.12Eyebolts, smaract 2.12
F
Fan cover 1.32Fan for fan cover 1.32Fan inst. set 1.33Fan unit 12.3Fan units, miracel 1.32Fans 12.7Fibre optic cable router 5.23Fibre optic cable routing panel 5.6Filter fan 12.8Filter mat, plinth, miracel 1.25Filter unit 12.6Fire behaviour 13.9Fluorescent tube 9.3Frame, miracel 1.12French socket strips 7.24Front intake 12.6Front panel mounting kit 6.23Front panel mounting kit, ConAct 6.27Front panel mounting kit, MaxLoad 6.27Front panel mounting kit, miracel 6.27Front panel mounting kit, smaract 6.27Front panel mounting kit, SoHo 6.27Front panel, 19” 6.16Front panel, adjustable 6.18Front panel, miracel, pivots 1.34Front panel, perforated 12.6Front ventilation panel 6.19
13.16
G
Glass doors, miracel 1.22GST18 connector system 7.17
7.33
H
Half cylinder, miracel 1.27Handle 6.7Heat exchanger, air-to-air 13.6Heat exchanger, air-to-water 13.8Heat transfer 13.5Heavy duty rack 1.56Heavy-duty shelf, fixed 6.6Heavy-duty shelf, full pull-out 6.6Heavy-duty rack, MaxLoad 1.56High availability 8.7
8.11Hinged cable carrier 5.25
6.7Hot swap batteries 8.5
8.9HU tape measure 1.15Humidity sensor 10.5
I
IEC320 socket strips 7.77.187.21
Infrared movement sensor 10.6IP code 13.4IP Reach LARAeco, M Series, TR Series 10.25IP Remote Power Control 10.38ISP rack, miracel 1.47Jumper crossbar 5.21Jumpering bracket 5.18
K
Keyboard drawer 11.76.12
Keyboard lock 10.6Keyboard 11.7
6.12KVM remote power control 10.36KVM switch 10.15KVM drawer 11.3
L
Lab rack, miracel 1.12Label, HU 1.15Lighting 9.3Line interactive technology 8.3Line Interactive UPS 8.5Lock sets, miracel 1.49Locking set, miracel 1.27
1.49Locking solutions 10.6Locking system 10.6Locks, mechanical 10.10LCD Monitor 11.5
M
Mains distribution 9.2Mains filter socket strips 7.12
7.147.167.287.307.327.37
Mains fuse protection 9.2Master Console 10.19Master Console, Ir 10.30Mechanical accessories 6.1Metal doors, miracel 1.21Mini distributor 9.2Mobile plinth, miracel 1.25Modular terminal box 9.4Monitor 11.5Monitoring system 10.2Mounting adapter for server extrusions 1.15
2.9Mounting extrusions, miracel 1.14Mounting kit 6.23Mounting kit, 19” extrusions, miracel 1.15Mounting kit, ConAct 6.26Mounting kit, doubleprorack 6.26Mounting kit, miracel 6.25Mounting kit, smaract 6.25Mounting panel, SOHO 4.12Movement sensor 10.6Multifunctional strut 5.7
N
Network equipment Rack, miracel 1.11Network rack 1.1Network stand-alone enclosure,doubleprorack 3.5Network stand-alone enclosure, smaract 2.6Network wall-mounting 4.1Network wall-mounting 4.9NG 800 1.11NO 19 1.12NS 19.8 D 1.10NS 19.8 1.8NS 25 1.6NS 26 1.7
O
Online technology 8.3Online UPS 8.7
8.11Overvoltage protection socket strips 7.13
7.167.297.327.377.39
P
Panel filter 6.19Panel, side, pivots, miracel 1.34Paragon II 10.22Passive racks 1.1Plinth trim with brush strip, miracel 1.25Plinth with tilt restraint, miracel 1.46Plinth, doubleprorack 3.9Plinth, smaract 2.11Plug-in system socket strips, Wieland 7.17
7.33Plug-in systems, GST18 7.17
7.33Power cleaner, DI-STRIP 7.12
7.187.28
Power distribution 7.1Power distribution 9.2Protection ratings according to racks/enclosures (IP code) 13.4Protector emergency off, DI-STRIP 7.11
7.27Protector FI, DI-STRIP 7.10
7.26Protector LS, DI-STRIP 7.10
Pulsar Evolution UPS LI 8.5Pulsar EXtreme C UPS 8.7Pulsar EXtreme UPS 8.11
R
Rack connector, doubleprorack 3.11Rack connector, miracel 1.13
1.48Rack lamp, Luminestra 9.3Rack lighting 9.3Rack monitoring system 10.2Rack monitoring 10.2Rack system, miracel 19” 1.1Rack, 19”, miracel 1.1Radial limit 5.14Rear door, smaract 2.9Rear fan panel, doubleprorack 3.7Rear panel, doubleprorack 3.8Rear panel, miracel 1.29Redundant power feed 7.6
7.19Relay card, UPS 8.6
8.108.14
Remote opening 10.7Remote Power Control 10.36Replacement fan 12.7Replacement filter, CoolBlast 12.6Replacement filter, smaract 2.10RICC 11.3RMS compact 10.2
S
Safety basic, DI-STRIP 7.137.177.297.33
Safety standard, DI-STRIP 7.147.177.307.337.37
Screws 6.29Seismic rack 1.56Sensors 10.5Serial console server 10.32
10.34Server extrusions 1.15
2.9Server rack 1.35Server rack, high density 1.51Server rack, water-cooled 1.51Servers, compact rack 2.1Sheet steel door, ConAct 4.7Sheet steel door, doubleprorack 3.8Sheet steel doors, miracel 1.21Shelf 6.9Shelf, 10” 4.13Shelf, adjustable 6.8Shelf, fixed 6.3Shelf, fixed 6.8Shelf, full pull-out 6.5Shelf, partial pull-out 6.4Side panel screw fixing, miracel 1.28Side panel, miracel 1.28Signal switch 10.15Small Office - Home Office 4.9smaract 2.1Smoke detector 10.5SNMP web card, UPS 8.6
8.108.14
Socket strip connection cables 7.197.237.34
Socket strip, 10” 4.14
I N D E X
13.17
I N D E X
Socket strips - USA 7.38Socket strips 7.1Socket strips, DI-STRIP 7.2Socket strips, Master – Slave 7.15
7.177.317.33
Socket strips, Serimat 7.40SOHO 4.9Solid bearing telescopic slide 6.22Spring nut 6.28Stacking set, smaract 2.12Standards and specifications 13.4Stationary plinth, miracel 1.24Surge protector, AC 10.6Surge protector, DI-STRIP 7.39Swing frame rack, miracel 1.10Swing frame, miracel 1.16Swiss socket strips 7.35SwitchMan 10.18System accessories 6.1System locks 10.6System switch-on field 9.2
T
Tape measure, HU 1.15Technical abbreviations 13.13Telescopic slide 6.20Temperature module 11.9
Temperature sensor, ECO 10.5TFT accessories 11.1TFT drawer 11.1Thermal management 12.1Thermal overload protection 7.38TFT Monitor 11.5Thermostat 11.9Threaded plate 5.12Tilt restraint, Miracel 1.46Top-mounting cooling unit 12.12Top-mounting fan, miracel 1.32Top-mounting for cabling 5.11Touchscreen Monitor 11.5Tower UPS 8.2Transponder, locking systems 10.7TriplePower DI-STRIP 7.6Twin castor, doubleprorack 3.12Twin castor, smaract 2.12
U
U-Clamp 5.12Uninterruptible power supply 8.1UPS › 3000VA Online 8.2UPS 1000VA – 3200VA Online 8.7UPS 2000VA – 3000VA Online 8.11UPS 800VA – 3000VA LI 8.5UPS bypass 8.3UPS 8.1User protection socket strips 7.10
7.26
V
Velcro strip 5.24Vent lid, miracel 1.31Vent unit, ConAct 4.8Ventilation front panel 6.18Ventilation unit, miracel 1.32Ventilation unit, smaract 2.8Ventilation 12.1VFI-SS-111 IEC 6204-3 UPS 8.3Vibration sensor 10.6VI-SS-313 IEC 62040-3 UPS 8.3
W
Wall enclosure 4.1Wall enclosure, 10” 4.9Wall enclosure, 19”, ConAct 4.1Wall mounted cooling unit 12.11Wall mounting bracket, smaract 2.13Water sensor 10.6Wide range input 10.24
Z
Z Cim 10.21Z Series 10.21Z Series TFT Drawer 11.4
Knürr AGGlobal Headquarters
Mariakirchener Straße 3894424 Arnstorf • GermanyTel. +49 (0) 87 23 / 27 - 0Fax +49 (0) 87 23 / 27 - 154www.knuerr.com
World-wide... and close
to thecustomer
www.knuerr.com
09.9
97.5
24.9
• II
10G
G30
5 •
Pri
nted
in G
erm
any
• Id
ea, G
raph
ics,
Edi
tori
al: G
ropp
/Hub
erSu
bjec
t to
tech
nica
l cha
nges
, err
ors
and
omis
sion
s.
HamburgTel. +49 (0) 41 01 / 40 01-0Fax +49 (0) 41 01 / 40 01-99
CologneTel. +49 (0) 22 36 / 89 00-0Fax +49 (0) 22 36 / 89 00-99
LeipzigTel. +49 (0) 3 41 / 2 45 15-0Fax +49 (0) 3 41 / 2 45 15-99
MunichTel. +49 (0) 89 - 4 20 04-200Fax +49 (0) 89 - 4 20 04-199
StuttgartTel. +49 (0) 71 52 / 93 67-0Fax +49 (0) 71 52 / 93 67-99
Regional Sales Offices
NorwayTel. +47 ( ) 64 83 84 40Fax +47 ( ) 64 83 84 50
PolandTel. +48 (22) 6 76 94 62Fax +48 (22) 6 76 98 10
PortugalTel. +351 (21) 3 22 41 63Fax +351 (21) 3 22 41 69
Russia ICSTel. +7 (095) - 755 68 19Fax +7 (095) - 913 99 87
Russia OCSTel. +7 (095) - 995 25 75Fax +7 (095) - 324 28 70
Russia UNITel. +7 (095) - 780 95 55Fax +7 (812) - 780 95 56
SingaporeTel. +65 ( ) 67 73 - 1583Fax +65 ( ) 67 73 - 1582
SlovakiaTel. +421 (0) 2 - 64 28 78 81Fax +421 (0) 2 - 64 28 78 91
SpainTel. +34 91 - 8 89 89 61Fax +34 91 - 8 89 84 92
SwedenTel. +46 (0) 8 - 58 74 27 70Fax +46 (0) 8 - 58 74 28 88
Sweden LBWTel. +46 (0) 8 - 58 41 08 80Fax +46 (0) 8 - 58 02 67 69
SwitzerlandTel. +41 (0) 1 8 06 54 54Fax +41 (0) 1 8 06 54 64
TaiwanTel. +886 (0) 2 - 22 76 - 10 19Fax +886 (0) 2 -22 79 -88 83
United Arab EmiratesTel. +971 (0) 4 - 335 29 95Fax +971 (0) 4 - 334 99 51
United KingdomTel. +44 (0) 1480 49 61 25Fax +44 (0) 1480 49 63 73
USATel. +1 (805) 5 26 - 77 33Fax +1 (805) 5 84 - 83 71
AustraliaTel. +61 (0) 2 96 66 - 48 66Fax +61 (0) 2 96 66 - 48 68
AustriaTel. +43 (0) 1 - 9 70 22 - 0Fax +43 (0) 1 - 9 70 22 - 29
BelgiumTel. +32 (0) 3 - 450 7777Fax +31 (0) 76 - 542 1015
BrazilTel. +55 (0) 15 - 3263 - 2444Fax +55 (0) 15 - 3263 - 1024
ChinaTel. +86 (0) 10 62 38 58 28Fax +86 (0) 10 62 38 58 29
Czech RepublicTel. +420 (0) 596 152 392Fax +420 (0) 596 152 112
DenmarkTel. +45 ( ) 44 85 04 85Fax +45 ( ) 44 94 99 89
FinlandTel. +358 (0) 19 - 8711 1Fax +358 (0) 19 - 8711 500
FranceTel. +33 (0) 1 43 77 85 85Fax +33 (0) 1 43 39 02 10
GreeceTel. +30 2310 - 69 11 90Fax +30 2310 - 69 11 80
Hong KongTel. +852 28 51 22 11Fax +852 28 51 20 60
HungaryTel. +36 (0) 1 4 21 - 30 08Fax +36 (0) 1 4 21 - 30 00
IndiaTel. +91 20 - 712 01 21-4Fax +91 20 - 712 03 16
IsraelTel. +972 (0) 9 - 892 44 44Fax +972 (0) 9 - 892 44 55
ItalyTel. +390 (0) 2 95 34 30 80Fax +390 (0) 2 95 34 31 04
JapanTel. +81 (0) 4 26 - 56 - 58 11Fax +81 (0) 4 26 - 56 - 58 08
NetherlandsTel. +31 (0) 76 - 54 22 92 2Fax +31 (0) 76 - 54 21 01 5