Isuzu_transtrom_READ_WR.pdf
of 4
-
Upload
alexandre-da-silva-pinto -
Category
Documents
-
view
213 -
download
0
Transcript of Isuzu_transtrom_READ_WR.pdf
-
8/18/2019 Isuzu_transtrom_READ_WR.pdf
1/4
Connect as below:
Serial Suite: ECU Plug:
Red to 1 Pins Red (Power Supply +12 Volt)Black to 1 Pins Black (Ground)
Piasiniengineering [email protected] – http://www.piasiniengineering.it Tel: +39 0342 489060 - Fax: +39 0342 488298
mailto:[email protected]://www.piasiniengineering.it/http://www.piasiniengineering.it/mailto:[email protected]
-
8/18/2019 Isuzu_transtrom_READ_WR.pdf
2/4
Where to connect the flat cable:
Backside:
Piasiniengineering [email protected] – http://www.piasiniengineering.it Tel: +39 0342 489060 - Fax: +39 0342 488298
mailto:[email protected]://www.piasiniengineering.it/http://www.piasiniengineering.it/mailto:[email protected]
-
8/18/2019 Isuzu_transtrom_READ_WR.pdf
3/4
-
8/18/2019 Isuzu_transtrom_READ_WR.pdf
4/4
WRITE the ECU:Front
For write the ECU put 1 capacitor(1uF) and connect the flat cable following thenumber in the picture.
Back
For write the ECU put 1 wire(bridge) and connect the flat cable following the numberin the picture.
Piasiniengineering [email protected] – http://www.piasiniengineering.it Tel: +39 0342 489060 - Fax: +39 0342 488298
mailto:[email protected]://www.piasiniengineering.it/http://www.piasiniengineering.it/mailto:[email protected]
