GlobalFilter.com Issue 2015 · Absolute Grade Polypropylene Meltblown Cartridges – GATB ..... 41...

1

GlobalFilter.com | Issue 2015

Validated Filtration Solutions To Industry Leaders®

FILTRATION ISESSENTIAL.Global Filter is your filtration partner.

2

3

Global Filter is now part of Filtration Group!

About Filtration Group

The fastest-growing filtration company in the world, Filtration Group is passionate about cleaning air, reducing carbon emissions, increasing energy efficiency and keeping food, water and medical procedures safe through its wide range of filtration solutions. Delivering outstanding value to industry leaders around the globe, Filtration Group operates facilities in 20 countries under four operating divisions: Liquid/Process, Environmental Air, Fluid and Bio/Medical.

Headquartered in Chicago, Illinois, Filtration Group provides solutions to customers in the food and beverage; water, micro-electronics and telecommunications; environmental air; medical, pharma and bioscience; hydraulic fluid; mining and minerals; industrial finishing and energy industries.

For more comprehensive information, visit our website at FiltrationGroup.com.

Filtering SOLUTIONS

Our Company About Filtration Group ..............................................................................3Our Cleanroom...........................................................................................6Our Products ............................................................................................10

Our ProductsCartridge End Cap Configurations ........................................................11

PLEATED DEPTH CARTRIDGESHigh Purity – PP Pleated Cartridges ....................................................12Economy – PP Pleated Cartridges .......................................................13High Purity – FG Pleated Cartridges ....................................................14Economy – FG Pleated Cartridges .......................................................15Economy – PEE Pleated Cartridges .....................................................16LiquidClear – GF Synthetic Pleated Cartridges .................................17

PLEATED MEMBRANE CARTRIDGESHigh Purity – Hydrophilic Polysulfone (PS) Membranes ..................18High Purity – Water Service Grade Polyethersulfone (PES) Membranes ..........................................................................19High Purity – Water Clear Polyethersulfone (PES) Membranes ..........................................................................20High Purity – General Grade Polyethersulfone (PES) Membranes .........................................................................21High Purity – Electronics Grade Polyethersulfone (PES) Membranes ..........................................................................22High Purity – Food and Beverage Grade Polyethersulfone (PES) Membranes ...........................................23High Purity – Wine and Beverage Grade Polyethersulfone (PES) Membranes ...........................................24High Purity – Bio-Reduction Grade Polyethersulfone (PES) Membranes ...........................................25High Purity – Pharmaceutical Grade Polyethersulfone (PES) Membranes ...........................................26High Purity – General Grade Nylon 6,6 and Plus+ Nylon 6,6 Membranes .................................................27High Purity – Electronics Grade Nylon 6,6 and Plus+ Nylon 6,6 Membranes .........................................................28High Purity – Food and Beverage Grade Nylon 6,6 and Plus+ Nylon 6,6 Membranes .................................................29High Purity – General Grade PTFE Membranes ................................30High Purity – Electronics Grade PTFE Membranes ..........................31High Purity – Pharmaceutical Grade PTFE Membranes ..................32High Purity – Hydrophobic Polysulfone (PSH) Membranes ............33High Purity – FluoroClear All-Fluorocarbon Membranes .................34

HIGH FLOW PLEATED DEPTH CARTRIDGESHF Series High Flow Cartridges ............................................................35HFB Series High Flow Pleated Filter Cartridges ................................36

DEPTH CARTRIDGESBi-Component Cartridges – GPB ..........................................................37Water Grade Polypropylene Meltblown Cartridges – GWTB ..........38Water Grade BB-Size Polypropylene Meltblown Cartridges – GWTB ....................................................39High Performance Grade Polypropylene Meltblown Cartridges – GCTB .....................................................40Absolute Grade Polypropylene Meltblown Cartridges – GATB ......41 Resin-Bonded Cartridges – GRB ..........................................................42Wound Depth Cartridges .......................................................................43

REVERSE OSMOSIS MEMBRANESG.E.M. Reverse Osmosis Membranes .................................................44

LIQUID FILTER BAGSStandard Felt Liquid Filter Bags............................................................45Standard Mesh Liquid Filter Bags ........................................................46High Efficiency Microfiber Liquid Filter Bags ....................................47

LIQUID FILTER VESSELSSingle-Cartridge Liquid Vessels – GFHD .............................................48Multi-Cartridge Liquid Vessels – GTCH ...............................................49Multi-Cartridge Band-Clamp Liquid Vessels – GTCHB .....................50Single-Bag Liquid Vessels – GBFV .......................................................51Single-Bag Liquid Vessels – GBFE4 .....................................................52Twin-Bag Liquid Vessels – GBFV82......................................................53Multi-Bag Liquid Vessels – GMBV .......................................................54Carbon Steel Single & Multi-Bag Liquid Vessels – GBFV & GMBE ..............................................................55

4 5

Our warehouse in Marion, Iowa: The vessels you need, in stock. And 300,000 meltblown cartridges ready for same-day shipment.

From modest beginnings as a family, home-based business, Global Filter now serves customers—as our name implies—around the globe. Some of the

biggest names in liquid filtration trust their reputations to Global Filter.

We provide liquid filtration solutions for a wide range of industries, including:

The inventory you need to keep your processes flowing.

Founded in 1999 in Cedar Rapids, Iowa,Global Filter produces high-purity pleated

filter cartridges in our state-of-the-art production facility.

• Food & Beverage • Pharmaceutical • Enzymes • Ethanol • Microelectronics• Water Service

• Automotive • Chemical • Petro-Chemical• Refining• Ink/Paint• Cosmetics

ABOUT US

The vessels you need, in stock, ready to ship. Problem solved!

6 7Our cleanroom: Improving cleanliness and optimizing your workflows.

At Global Filter, we continually strive to improve the quality of our products as well as the processes

that develop and produce them. We’ve recently invested in doubling the total footprint of our

cleanroom production environment. As part of this project, we have added a Class 10,000-certified area and commissioned an ultrapure water system that offers greater capacity and higher water quality to

enhance the cleanliness of our rinsed products.These and other investments will allow us to continue to meet our customers’ delivery requirements

while enhancing their ability to control and improve the quality of their finished goods.

We’ll meet your specs—guaranteed.

CLEANROOM

Customized solutions, precision, satisfaction.

8

Our commitment to excellence in cleanliness, efficiency, quality and

service is driven by our goal to exceed the requirements of our customers.

Our goal is complete customer satisfaction and it is reflected

in everything we do.

9

COMMITMENT

10 11

Our ProductsImprove cleanliness and optimize your process with our full line of products:

• Pleated Depth and Membrane Cartridges • Depth Cartridges • Swing-Bolt Cartridge and Bag Vessels • Band-Clamp Cartridge and Bag Vessels • Custom Filtration Systems

Featured Products

PRODUCTS

• Validated Bio-Reduction and Pharmaceutical (Sterilizing) Grade Polyethersulfone (PES) Membrane Cartridges• Validated Pharmaceutical (Sterilizing) Grade PTFE Membrane Cartridges

Global Filter LLC • 7201 Mt. Vernon Rd. SE • Cedar Rapids, IA 52403Phone: 319-743-0110 • Fax: 319-743-0220 • Toll free: 877-603-1003 • www.GlobalFilter.com

Validated Filtration Solutions to Industry Leaders™

Filter Data Sheet

Cartridge End Cap Configurations

Global Filter LLC . 7201 Mt. Vernon Rd. SE . Cedar Rapids, IA 52403Phone: (319) 743-0110 . Fax: (319) 743-0220 . Toll Free: 877-603-1003 . www.globalfilter.com

1Rev. 13.3

Open (DOE) Spring PP Core Ext. 213 Internal O-Ring

Flat (for 213) 222 222 (w/SS Insert) 226

226 (w/SS Insert) Flat Cap Fin 316ss Compression Spring


11

12 13Global Filter LLC • 7201 Mt. Vernon Rd. SE • Cedar Rapids, IA 52403

Phone: 319-743-0110 • Fax: 319-743-0220 • Toll free: 877-603-1003 • www.GlobalFilter.com12

Validated Filtration Solutions to Industry Leaders®

Filter Data Sheet

High Purity - PPPleated Polypropylene Cartridge

DISCLAIMER: Filtration data presented is representative of performance observed in controlled laboratory testing. It is not given as a warranty, specification or statement of fitness for use. Specific performance can vary widely depending on contaminant type, fluid properties, flow rates and environmental conditions. It is recommended that users conduct thorough qualification testing to assure the product functions as required.

Global Filter LLC . 7201 Mt. Vernon Rd. SE . Cedar Rapids, IA 52403

Phone: (319) 743-0110 . Fax: (319) 743-0220 . Toll Free: 877-603-1003 . www.globalfilter.com1Rev. 14.1

Pleated Polypropylene Cartridges are designed for use in most applications where absolute rated pleated filtration is needed. Designed to hold 6.5 square feet of filtration media, our High Purity - PP cartridges are a great value. These cartridges are constructed with 100% polypropylene materials and assembled using the latest thermal bonding equipment. PP cartridges are offered in both absolute (to 99.98%) and nominal (90%) retention efficiencies.

0 1 2 3 4 5 6 7 8Water Flow Rate (GPM)

20

18

16

14

12

10

8

6

4

20.0

Diff

eren

tial P

ress

ure

(PSI

D)

0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4

Water Flow Rate (LPM)per 10” cartridge

Flow Rate vs Pressure Drop

• Food & Beverage• Photographic• Deionized Water• R.O. Membrane• Pre-Filtration

• Process Water• Fine Chemicals • Plating Chemicals • Wastewater

Construction MaterialsFiltration Media ............................PolypropyleneSupport Media ..............................PolypropyleneEnd Caps ...........................................PolypropyleneCenter Core .....................................PolypropyleneOuter Support Cage ....................PolypropyleneO-Rings/Gaskets .............Buna, EPDM, Silicone,

Viton®, Teflon® Encapsulated Viton®

Sanitization/SterilizationFiltered Hot Water..................... 80˚C for 30 min.Steam Sterilization ................121˚C for 30 min.,

multiple cyclesChemicals: Cartridges are chemically compatible with most chemicals and sanitizing agents.Note: Stainless steel insert option needed for all cartridges being hot water sanitized or steam sterilized.

DimensionsLength:10 to 40 inches (25.4 to 101.6 cm) nominal Outside Diameter:2.70 inches (7.0 cm) nominal

Maximum Recommended Operating ConditionsChange Out ............................................... ΔP 35 PSITemperature ........................................176˚F (80˚C)

FDA Listed MaterialsManufactured from materials which are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations.

ToxicityAll polypropylene components meet the specifications for biological safety per USP Class VI – 121˚C for plastics.

Typical Applications

PP Rating (µ) Retention Length C End Cap Style O-Rings/Gaskets - Adders

0.2 A = Absolute 10” (25.4 cm) 2 = DOE Flat Gasket B = Buna I = Stainless Steel Insert

0.45 N = Nominal 20” (50.8 cm) 3 = 222 w/ Fin E = EPDM HP = Heavy Poly Core

1.0 30” (76.2 cm) 4 = 222 w/ Flat Cap S = Silicone FG = Glass Reinforced PP Core

2.0 40” (101.6 cm) 5 = 222 w/ Spring V = Viton® SS = Stainless Steel Core

5.0 6 = 226 w/ Flat Cap T = Teflon® Encapsulated Viton® R = 18 Megohm Rinse

10.0 7 = 226 w/ Fin Z = Teflon® Encapsulated Silicone CS = 316ss Compression Spring

20.0 8 = 226 w/ Spring

40.016 = 213 Internal

O-Ring

Ordering Information

*All data is based on absolute rated medias. Nominally rated medias will result in a pressure drop reduction of approximately 10%.

Global Filter LLC • 7201 Mt. Vernon Rd. SE • Cedar Rapids, IA 52403Phone: 319-743-0110 • Fax: 319-743-0220 • Toll free: 877-603-1003 • www.GlobalFilter.com 13

Validated Filtration Solutions To Industry Leaders® Validated Filtration Solutions To Industry Leaders®Validated Filtration Solutions to Industry Leaders®

Filter Data Sheet

Economy - PPPleated Polypropylene Cartridge

Economy Pleated Polypropylene Cartridges offer a highly efficient and cost-effective filtration option for use in a wide variety of applications. These cartridges are constructed of 100% polypropylene materials and are assembled using the latest thermal-bonding equipment. Cartridges are offered in DOE and 222 end configurations as well as in both nominal (90%) and absolute (to 99.98%) retention efficiencies.


20

18

16

14

12

10

8

6

4

20.0

Diff

eren

tial P

ress

ure

(PSI

D)

0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4

Water Flow Rate (LPM)per 10” cartridge Construction Materials

Filtration Media ............................PolypropyleneSupport Media ..............................PolypropyleneEnd Caps ...........................................PolypropyleneCenter Core .....................................PolypropyleneOuter Support Netting ..............PolypropyleneO-Rings/Gaskets .............Buna, EPDM, Silicone,

Viton®, Teflon® Encapsulated Viton®DimensionsLength:10 to 40 inches (25.4 to 101.6 cm) nominal Outside Diameter:2.50 inches (6.35 cm) nominal

Maximum Recommended Operating ConditionsChange Out ...............................................ΔP 35 PSITemperature .......................................176˚F (80˚C)





3


Typical Applications• Food & Beverage• Photographic• Deionized Water• R.O. Membrane• Pre-Filtration• Process Water

• Fine Chemicals • Process• Plating Chemicals • Wastewater• Produced Water• Cosmetics

PPE Rating (µ) Retention Length N End Cap Style O-Rings/Gaskets - Adders

0.2 A = Absolute 10” (25.4 cm) 2 = DOE Flat Gasket B = Buna SS = Stainless Steel Core

0.45 N = Nominal 20” (50.8 cm) 3 = 222 w/ Fin E = EPDM CS = 316ss Compression Spring

1.0 30” (76.2 cm) 4 = 222 w/ Flat Cap S = Silicone

2.0 40” (101.6 cm) 5 = 222 w/ Spring V = Viton®

5.0 T = Teflon® Encapsulated Viton®

10.0

20.0

40.0



Rev. 14.0

Global Filter LLC • 7201 Mt. Vernon Rd. SE • Cedar Rapids, IA 52403Phone: 319-743-0110 • Fax: 319-743-0220 • Toll free: 877-603-1003 • www.GlobalFilter.com14



Filter Data Sheet

High Purity - FGPleated Microglass Cartridge

Pleated Microglass Cartridges offer an economical, absolute rated, filtration solution for both liquids and gases. They offer excellent flow rates and long service life with an exceptional ability to retain both deformable and non-deformable particles.FG cartridges are constructed with absolute rated borosilicate microglass media that offers high dirt-loading capacities. The natural positive charge of the glass also aids in the retention of negatively charged particulates such as bacteria, endotoxins and a variety of colloidal materials. FG cartridges are offered in both absolute (to 99.98%) and nominal (90%) retention efficiencies.


0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0

Diff

eren

tial P

ress

ure

(PSI

D)

0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4


• Membrane• Pre-Filtration• Sterile Air• Corn Syrup

• R.O. Pre-Filtration• Wine Clarification• Aromatic• Hydrocarbons

Construction MaterialsFiltration Media - FDA Borosilicate Microglass with acrylic binder.Support Media - Spun-bonded polyester laminated on both upstream and downstream sides.End Caps ...........................................PolypropyleneCenter Core ................................. Glass-reinforced

PolypropyleneOuter Support Cage ....................PolypropyleneO-Rings/Gaskets .............Buna, EPDM, Silicone,



multiple cyclesChemicals: Cartridges are chemically compatible with most chemicals and sanitizing agents.Note: Stainless steel insert option needed for all cartridges being hot water sanitized or steam sterilized.


Maximum Recommended Operating ConditionsChange Out ............................................... ΔP 35 PSITemperature ........................................200˚F (93˚C)





1

Note: Contact factory for information on high- temperature stainless construction options.


FG Rating (µ) Retention Length C End Cap Style O-Rings/Gaskets - Adders

0.2 A = Absolute 10” (25.4 cm) 2 = DOE Flat Gasket B = Buna I = Stainless Steel Insert

0.45 N = Nominal 20” (50.8 cm) 3 = 222 w/ Fin E = EPDM SS = Stainless Steel Core

1.0 30” (76.2 cm) 4 = 222 w/ Flat Cap S = Silicone CS = 316ss Compression Spring


5.0 6 = 226 w/ Flat Cap T = Teflon® Encapsulated Viton®

10.0 7 = 226 w/ Fin Z = Teflon® Encapsulated Silicone

20.0 8 = 226 w/ Spring

40.0 16 = 213 Internal O-Ring


Note: Optional High Temperature Construction available.


R = 18 Megohm Rinse

Rev. 14.1


Filter Data Sheet

Economy - FGPleated Microglass Cartridge

Economy Pleated Microglass Cartridges offer a highly efficient and cost-effective filtration option for use in a wide variety of applications. These cartridges are constructed of FDA materials and are assembled using the latest thermal-bonding equipment. Cartridges are offered in DOE and 222 end configurations as well as in both nominal (90%) and absolute (to 99.98%) retention efficiencies.

0 1 2 3 4 5 6 7 8

Water Flow Rate (GPM)

Diff

eren

tial P

ress

ure

(PSI

D)

0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4


• Food & Beverage• Photographic• Deionized Water• R.O. Membrane• Pre-Filtration• Process Water• Solvents• Fine Chemicals

• Process• Plating Chemicals • Wastewater• Produced Water• Cosmetics• Hydrocarbons• Synthetic Lubricants

Construction MaterialsFiltration Media ........................ FDA Borosilicate

Microglass with an acrylic binderSupport Media ............Spun-bonded PolyesterEnd Caps ......................................................PolyesterCenter Core ................................................PolyesterOuter Support Netting .........................PolyesterO-Rings/Gaskets .............Buna, EPDM, Silicone,



Maximum Recommended Operating ConditionsChange Out ............................................... ΔP 35 PSITemperature ..................................... 235˚F (113˚C)




5


0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0

0.2µ 0.45µ 1.0µ + 2.0µ5.0µ + 10.0µ 20.0µ + 40.0µ


FGE Rating (µ) Retention Length N End Cap Style O-Rings/Gaskets - Adders






10.0

20.0

40.0



Rev. 14.0




Filter Data Sheet

Economy - PEEPleated Polyester Meltblown Cartridge

Economy Pleated Polyester Meltblown

Cartridges offer a highly efficient and cost-

effective filtration option for use in a wide

variety of applications. These cartridges

are constructed of FDA materials and are

assembled using the latest thermal-bonding

equipment. Cartridges are offered in DOE

and 222 end configurations as well as in both

nominal (90%) and absolute (to 99.98%)

retention efficiencies.

Construction MaterialsFiltration Media .............FDA Pleated Polyester

MeltblownSupport Media ............Spun-bonded PolyesterEnd Caps ......................................................PolyesterCenter Core ................................................PolyesterOuter Support Netting .........................PolyesterO-Rings/Gaskets .............Buna, EPDM, Silicone,



Maximum Recommended Operating ConditionsChange Out ............................................... ΔP 35 PSITemperature ..................................... 235˚F (113˚C)




6

• Food & Beverage• Photographic• Deionized Water• R.O. Membrane• Pre-Filtration• Process Water• Solvents• Fine Chemicals

• Process • Plating Chemicals • Wastewater • Produced Water• Cosmetics• Hydrocarbons• Synthetic Lubricants


PEE Rating (µ) Retention Length N End Cap Style O-Rings/Gaskets - Adders






20.0


Rev. 14.0


Filter Data Sheet

LiquidClear GF - Synthetic Pleated Cartridge

• 100% cellulose-free construction• Pleated design offers significantly increased

surface area and loading capacity when compared to depth cartridges (string-wound, meltblown and resin-bonded)

• Excellent compatibility with a wide range of chemicals and sanitizing agents

• High flow rates at low pressure drops• Plastisol (PVC) end caps / gaskets offer

positive seal• All cartridges are manufactured with

polypropylene outer netting• Wide variety of micron ratings (0.35 - 50) and

lengths (9.75”– 40”) available

• Process Water • Plating Chemicals• Cooling Water • Wastewater• Drinking Water • Food & Beverage• R.O. Pre-Filtration • Deionized Water

Construction MaterialsFiltration Media ..............Polypropylene, PolyesterEnd Caps/Gaskets ...........................................PlastisolCore ........................................................... PolypropyleneOuter Netting ....................................... Polypropylene

DimensionsOutside Diameter................2.7 or 4.5 inch Inside Diameter ...................................1 inchLengths .................................. 9.75 to 40 inch

Maximum Recommended Operating ConditionsDifferential Pressure .................................20-25 PSIDTemperature ..............................................140˚F (60˚C)




7

PurityLiquidClear cartridges are produced using 100% synthetic fibers, which are free of binders or adhesives.

Performance SpecificationsMicron Ratings ....................0.35,1,1A,5,10,20,30,50Efficiencies ...................................0.35-50µ = Nominal

1A = 99%

Cross-ReferencePentek® .......................................... R-Series, ECP-SeriesWatts® ................................................................FM-Series


GF - Diameter - Rating (µ) - Length End Cap Style

Blank = 2.7 0.35 9.75” Blank = DOE

BB = 4.5 1 10” (BB Only)

1A 19.5”

5 20”

10 29.25”

20 30”

30 40”

50


Rev. 14.0





1Rev. 14.1

Filter Data Sheet

High Purity - Polysulfone (PS) Membrane Hydrophilic Polysulfone Membrane for Water and Aqueous Solutions

Hydrophilic Polysulfone Membrane Cartridges are an exceptional choice for ultra-high purity water and aqueous fluid appli-cations. GHPS series cartridges offer extremely high flowrates and service-life while filtering to 0.05-1.2µm. GHPS cartridges are constructed using high purity polypropylene support ma-terials and hardware and assembled using the latest thermal-bonding equipment. This results in an exceptionally clean cartridge that rinses to 18 MΩ with minimal throughput. The Extended Area option (GHPSX) offers up to 40% more surface area. This additional areas results in significant increases in flowrate and loading capacity in the same footprint.

Typical Applications• Deionized Water Systems• General-Use Water Filtration• Liquid Clarification• Recirculating Fluids• Chemical Filtration


multiple cycles

Chemicals: Cartridges are chemically compatible with most chemicals and sanitizing agents.Note: Stainless steel insert option needed for all cartridges being hot water sanitized or steam sterilized.


Maximum Recommended Operating ConditionsTemperature ........................................176˚F (80˚C)




Flow Rate vs Pressure Drop Construction MaterialsMembrane .............................................Polysulfone Support Media ..............................PolypropyleneEnd Caps ...........................................PolypropyleneCenter Core .....................................PolypropyleneOuter Support Cage ....................PolypropyleneO-Rings/Gaskets .............Buna, EPDM, Silicone,


Maximum Differential PressuresForward ............................. 50 PSI (3.4 bar) at 20˚CReverse .............................. 40 PSI (2.7 bar) at 20˚C

GHPS Rating (µ) A Length C End Cap Style O-Rings/Gaskets - Adders

GHPSX 0.05 10” (25.4 cm) 2 = DOE Flat Gasket B = Buna I = Stainless Steel Insert

0.1 20” (50.8 cm) 3 = 222 w/ Fin E = EPDM HP = Heavy Poly Core

0.2 30” (76.2 cm) 4 = 222 w/ Flat Cap S = Silicone R = 18 Megohm Rinse

0.45 40” (101.6 cm) 6 = 226 w/ Flat Cap V = Viton® CS = 316ss Compression Spring

0.65 7 = 226 w/ Fin T = Teflon® Encapsulated Viton®

0.8 16 = 213 Internal O-Ring Z = Teflon® Encapsulated Silicone

1.2


Rating (µ) DI Water Flowper 1 PSID (gpm/10” (25.4cm) equivalent

0.05 1.1 (4.2 lpm)

0.1 1.9 (7.2 lpm)

0.2 3.3 (12.5 lpm)

0.45 6.0 (22.7 lpm)

0.65 6.6 (24.9 lpm)

0.8 7.7 (29.1 lpm)

1.2 8.4 (31.8 lpm)*Data represents GHPS. For GHPSX option, multiply given flowrate by 1.4.


Filter Data Sheet

High Purity - Water Service Grade PESHydrophilic Polyethersulfone (PES) Membrane for Water Purification

Water Service Grade PES Cartridges are cost

effective alternatives to General and Electronic

Grade cartridges for a variety of aqueous

based fluids. Water Service cartridges are

manufactured from an inherently hydrophilic

PES membrane. These cartridges offer

excellent flow characteristics, extended

service life and broad chemical compatibility.



multiple cycles








1

Construction MaterialsMembrane ..................................PolyethersulfoneSupport Media ..............................PolypropyleneEnd Caps ...........................................PolypropyleneCenter Core .....................................PolypropyleneOuter Support Cage ....................PolypropyleneO-Rings/Gaskets .............Buna, EPDM, Silicone,




5

4

3

2

1

0

Diff

eren

tial P

ress

ure

(PSI

D)

0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4


0.04µ + 0.1µ

0.2µ

0.45µ0.65µ

0.8µ

Rev. 14.1

GWPES Rating (µ) A Length C End Cap Style O-Rings/Gaskets - Adders

0.04 10” (25.4 cm) 2 = DOE Flat Gasket B = Buna I = Stainless Steel Insert


0.2 30” (76.2 cm) 4 = 222 w/ Flat Cap S = Silicone CS = 316ss Compression Spring

0.45 40” (101.6 cm) 6 = 226 w/ Flat Cap V = Viton® R = 18 Megohm Rinse







Validated Filtration Solutions To Industry Leaders® Validated Filtration Solutions To Industry Leaders®Validated Filtration Solutions to Industry Leaders™

Filter Data Sheet

High Purity - WaterClear PESHydrophilic Polyethersulfone (PES) Membrane Cartridges for Water Purification Applications



1

WaterClear PES Cartridges are constructed

of continuous length* polyethersulfone

membrane with polypropylene supports. This

combination offers extremely cost effective

membrane filtration for aqueous solution

applications. WaterClear cartridges deliver

excellent flow rates at a low pressure drops.




multiple cycles








6

5

4

3

2

1

0

Diff

eren

tial P

ress

ure

(PSI

D)

0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4


Typical ApplicationsDeionized Water SystemsGeneral-Use Water FiltrationLiquid ClarificationChemical Filtration

Rev. 14.1

WCPES Rating (µ) A Length C End Cap Style O-Rings/Gaskets - Adders


0.2 40” (101.6 cm) 6 = 226 w/ Flat Cap V = Viton® CS = 316ss Compression Spring




* Continuous length up to 30” (40” cartridges have (2) 20” segments).


0.1µ0.2µ 0.45µ 0.65µ

Validated Filtration Solutions to Industry Leaders® Validated Filtration Solutions to Industry Leaders®

Filter Data Sheet

High Purity - General Grade PESHydrophilic Polyethersulfone (PES) Membrane for Liquid Applications



1

General Grade PES Cartridges are designed for general purpose use wherever a cost-effective membrane filter is required. General Grade PES cartridges are inherently hydrophilic. These cartridges offer excellent flow characteristics, excellent service life and broad chemical compatibility. The Extended Area option (GGPESX) offers up to 40% more surface area. This additional area results in significant increases in flowrate and loading capacity in the same footprint.




multiple cycles







0.04µ + 0.1µ

0.2µ

0.45µ0.65µ

0.8µ


5

4

3

2

1

0

Diff

eren

tial P

ress

ure

(PSI

D)

0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4



Rev. 14.1

GGPES Rating (µ) A Length C End Cap Style O-Rings/Gaskets - Adders

GGPESX 0.04 10” (25.4 cm) 2 = DOE Flat Gasket B = Buna I = Stainless Steel Insert

0.1 20” (50.8 cm) 3 = 222 w/ Fin E = EPDM CS = 316ss Compression Spring


0.45 40” (101.6 cm) 6 = 226 w/ Flat Cap V = Viton®





* Data represents GGPES. For GGPESX option, multiply given flowrate by 1.4.




Filter Data Sheet

High Purity - Electronics Grade PESHydrophilic Polyethersulfone (PES) Membrane for Electronics Applications

Electronics Grade PES Cartridges are designed to meet the special needs of the electronics and high purity chemical industries. GGPES membrane cartridges are resistant to most acids and bases and are compatible with most sanitizing agents. The GGPES series delivers high flowrates at low pressure drops; making it an excellent choice for Ultra-Pure water systems. Each cartridge is flushed to 18 MΩ with UPW and 100% integrity tested to deliver ultra-clean effluent as well as ultra-low extractables. The Extended Area option (GGPESX) offers up to 40% more surface area. This additional area results in significant increases in flowrate and loading capacity in the same footprint.

Typical Applications• Ultra-Pure Water Systems• Fine Chemical Filtration• Photoresist Chemicals


multiple cycles








1





5

4

3

2

1

0

Diff

eren

tial P

ress

ure

(PSI

D)

0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4


0.04µ + 0.1µ

0.2µ

0.45µ0.65µ

0.8µ

Rev. 14.1

GGPES Rating (µ) A Length C End Cap Style O-Rings/Gaskets - Adders

GGPESX 0.04 10” (25.4 cm) 2 = DOE Flat Gasket B = Buna I = Stainless Steel Insert








Data represents GGPES. For GGPESX options, multiply given flowrate by 1.4.


Filter Data Sheet

High Purity - Food and Beverage Grade PESHydrophilic Polyethersulfone (PES) Membrane Developed for the Food and Beverage Industry



1

Food and Beverage Grade PES Cartridges have been designed to comply with all FDA requirements for the food industry. The polyethersulfone membrane exhibits low protein-binding characteristics; making the GFPES series an excellent choice for fermented beverage applications. Each cartridge is flushed with high purity DI water and 100% integrity tested to ensure the delivery of clean effluent as well as low extractables. The Extended Area option (GFPESX) offers up to 40% more surface area. This additional area results in significant increases in flowrate and loading capacity in the same footprint.




multiple cycles








5

4

3

2

1

0

Diff

eren

tial P

ress

ure

(PSI

D)

0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4


Typical Applications• Wine • Beer• Juices• Soft Drinks• Bottled Water

0.04µ + 0.1µ

0.2µ

0.45µ0.65µ

0.8µ

Rev. 14.1

GFPES Rating (µ) A Length C End Cap Style O-Rings/Gaskets - Adders

GFPESX 0.04 10” (25.4 cm) 2 = DOE Flat Gasket B = Buna I = Stainless Steel Insert








* Data represents GFPES. For GFPESX option, multiply given flowrate by 1.4.


Phone: 319-743-0110 • Fax: 319-743-0220 • Toll free: 877-603-1003 • www.GlobalFilter.com24Global Filter LLC • 7201 Mt. Vernon Rd. SE • Cedar Rapids, IA 52403

Phone: 319-743-0110 • Fax: 319-743-0220 • Toll free: 877-603-1003 • www.GlobalFilter.com 25


Filter Data Sheet



1Rev. 14.1

Wine and Beverage Grade PES cartridges remove all yeast and significantly reduce microorganisms prior to wine and beverage bottling. The removal of spoilage organisms is of critical importance. By incorporating a polypropylene prefiltration stage, Global Filter’s GBPES series filter cartridges provide exceptional retention of these organisms, while delivering long service life. Each cartridge is flushed to 18 MΩ with high purity water and 100% integrity tested to ensure the delivery of clean effluent as well as low extractables.

Typical Applications• Wine• Beer • Juices• Soft Drinks• Bottled Water

Construction MaterialsMembrane ........................... PolyethersulfoneSupport Media ..............................PolypropylenePrefilter .............................................PolypropyleneEnd Caps ...........................................PolypropyleneCages and Cores ...........................PolypropyleneO-Rings/Gaskets .............Buna, EPDM, Silicone,


Sanitization/SterilizationFiltered Hot Water............................ 88˚C at 5 PSISteam Sterilization:121˚C for 30 min. (@ 2 PSI up to 40 cycles) 121˚C for 60 min. (@ 2 PSI up to 25 cycles)

Chemicals: Peracetic acid, chlorinated alkaline products, bleach, sulfur dioxide and hydrogen peroxide at typical sanitization concentrations and temperatures.Note: Stainless steel insert option needed for all cartridges being hot water sanitized or steam sterilized.




Multi-log Microbiological Reduction

GBPES Rating (µ) A Length C End Cap Style O-Rings/Gaskets - Adders




40” (101.6 cm) 6 = 226 w/ Flat Cap V = Viton®

7 = 226 w/ Fin T = Teflon® Encapsulated Viton®

Z = Teflon® Encapsulated Silicone


Rating Challenge Microorganism LRV

0.45µ Serratia marcescens 6.6

0.65µ Lactobacillus plantarumand Saccharomyces cerevisiae 10

0.2µ

0.45µ

0.65µ


Diff

eren

tial P

ress

ure

(PSI

D)

0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4


5

4

3

2

1

0 Maximum Recommended Operating ConditionsTemperature ........................................176˚F (80˚C)


* Results of testing in accordance with ASTM F838 “Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration”.


High Purity - Wine and Beverage Grade PESHydrophilic Polyethersulfone (PES) Membrane Developed Specifically for the Wine and Beverage Industries


Filter Data Sheet

High Purity - Bio-Burden Reduction Grade PESHydrophilic Polyethersulfone Membrane Cartridges for Bio-Burden Reduction in Food & Beverage and Pharmaceutical Applications

BRPES Bio-Burden Reduction Grade filter cartridges are validated and 100% integrity-tested; providing bio-burden and small particle removal across a wide range of food & beverage, biological liquids and intermediate bulk pharmaceutical fluids. The BRPES series is constructed using a unique single-layer hydrophilic asymmetric polyethersulfone membrane. This construction offers broad chemical compatibility, high flow-rates at low pressure drops and low extractables.

BRPES cartridges are ideal as either a final filtration stage or as an extremely effective prefilter to a sterilizing stage. BRPES cartridges have exhibited average log-reduction values of >8 when challenged with the following microorganisms:

• 0.2μm Brevundimonas diminuta• 0.45μm Lactobacillus lindneri , Serratia marcescens• 0.65μm Lactobacillus lindneri, Saccharomyces

cerevisiae

Typical Applications• Cell Culture Media• Large Volume Parenterals (LVP’s)• Pharmaceutical Bulk Chemical Solutions• Diagnostics• Blood and Serum Fractions• Purified Water• Beer, Wine and Spirits• Juice & Soft Drinks• Bottled Water

Construction MaterialsMembrane ................................. PolyethersulfoneSupport Media ............................. PolypropyleneEnd Caps .......................................... PolypropyleneCenter Core .................................... PolypropyleneOuter Support Cage ................... PolypropyleneO-Rings/Gaskets .............Buna, EPDM, Silicone,


SterilizationHot Water ...... 85°- 95°C, 30 min., max. ΔP 7 psiIn-Line Steaming ......................... 134°C, 30 min.,

max. ΔP 7 psi; 100 cycles





BRPES Rating (µ) A Length, Nominal C End Cap Style O-Rings/Gaskets0.2 10” (25.4 cm) 2 = DOE Flat Gasket B = Buna-N

0.45 20” (50.8 cm) 3 = 222 w/ Fin E = EPDM






1Rev. 14.1

Maximum Recommended Operating ConditionsTemperature ....................................... 176°F (80°C)Forward ....................72 PSI (5 bar) at 68˚F (20°C)

29 PSI (2 bar) at 176°F (80°C)Reverse .................................................29 PSI (2 bar)


0.2µ

0.45µ

0.65µ

Diff

eren

tial P

ress

ure

(PSI

D)

4.0

3.0

2.0

1.0

0.0



0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4


NEW


Filter Data Sheet





cerevisiae











0.45 20” (50.8 cm) 3 = 222 w/ Fin E = EPDM






1Rev. 14.1




0.2µ

0.45µ

0.65µ

Diff

eren

tial P

ress

ure

(PSI

D)

4.0

3.0

2.0

1.0

0.0



0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4



Filter Data Sheet





cerevisiae











0.45 20” (50.8 cm) 3 = 222 w/ Fin E = EPDM






1Rev. 14.1




0.2µ

0.45µ

0.65µ

Diff

eren

tial P

ress

ure

(PSI

D)

4.0

3.0

2.0

1.0

0.0



0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4





Validated Filtration Solutions To Industry Leaders® Validated Filtration Solutions To Industry Leaders®Validated Filtration Solutions to Industry Leaders™

Filter Data Sheet

High Purity - Pharmaceutical Grade PESHydrophilic Polyethersulfone Membrane Cartridges for Pharmaceutical and Biological Applications

PPES Pharmaceutical Grade filter cartridges are ideal for sterile filtration and clarification of pharmaceutical and biological solutions. Each PPES cartridge is integrity tested during manufacturing and is supported by a validation guide for regulatory compliance. Low protein binding and the broad chemical compatibility characteristics of the polyethersulfone membrane, along with exceptional flow rate vs pressure drop, makes the PPES series the ideal choice for a variety of valuable and/or critical pharmaceutical solutions.

PPES cartridges are fully validated as sterilizing grade filters in accordance with HIMA and ASTM F838-05 guidelines. Sterile effluent was achieved with challenge concentration levels in excess of 107 Brevundimonas diminuta organisms per cm2 of filter area.

Typical Applications• Vaccines• Large Volume Parenteral (LVP’s)• Water for Injection (WFI)• Diagnostics• Ophthalmics• Cell and Tissue Culture Media• Protein Solutions• Serum and Blood Products









PPES Rating (µ) A Length, Nominal C End Cap Style O-Rings/Gaskets0.2 10” (25.4 cm) 2 = DOE Flat Gasket B = Buna-N

20” (50.8 cm) 3 = 222 w/ Fin E = EPDM

30” (76.2 cm) 4 = 222 w/ Flat Cap S = Silicone





1Rev. 14.1




0.2µ

Diff

eren

tial P

ress

ure

(PSI

D)

4.0

3.0

2.0

1.0

0.0 0 1 2 3 4 5 6 7 8Water Flow Rate (GPM)

0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4



0.2µm

NEW

1


Filter Data Sheet

High Purity - General Grade Nylon 6,6 and Plus+ Nylon 6,6Hydrophilic Nylon 6,6 for Liquid Applications

General Grade Nylon 6,6 Cartridges are designed for general purpose use wherever a cost-effective membrane filter is required. GFHNY cartridges are available in both standard and Plus+ grades. The Plus+ grade membrane is modified with a highly positive charge; allowing for the removal of particles that are significantly smaller than the membrane’s rating. The Extended Area option (GGHNYX) offers up to 40% more surface area. This additional area results in significant increases in flowrate and loading-capacity in the same footprint.

Typical Applications• Drinking Water• Wine• Soft Drinks• Pharmaceutical• Fermentation• Endotoxin Removal


multiple cycles







1

Construction MaterialsMembrane .................................................Nylon 6,6Support Media ..............................PolypropyleneEnd Caps ...........................................PolypropyleneCenter Core .....................................PolypropyleneOuter Support Cage ....................PolypropyleneO-Rings/Gaskets .............Buna, EPDM, Silicone,

Viton®, Teflon® Encapsulated Viton®Maximum Differential PressuresForward ............................. 50 PSI (3.4 bar) at 20˚CReverse .............................. 40 PSI (2.7 bar) at 20˚C


Rev. 14.1

GGHNY Rating (µ) A Length C End Cap Style O-Rings/Gaskets - Adders

GGHNY+ 0.03 10” (25.4 cm) 2 = DOE Flat Gasket B = Buna I = Stainless Steel Insert

GGHYNX 0.05 20” (50.8 cm) 3 = 222 w/ Fin E = EPDM CS = 316ss Compression Spring

GGHYNX+ 0.1 30” (76.2 cm) 4 = 222 w/ Flat Cap S = Silicone R = 18 Megohm Rinse




0.8 Z = Teflon® Encapsulated Silicone

1.2



0.03 0.75 (2.9 lpm)

0.05 0.8 (3.0 lpm)

0.1 1.2 (4.5 lpm)

0.2 2.4 (9.1 lpm)

0.45 4.0 (15.1 lpm)

0.65 6.0 (22.7 lpm)

0.8 6.5 (24.6 lpm)

1.2 7.0 (26.5 lpm)* Data represents GGHNY. For GGHNYX option, multiply given flowrate by 1.4.


Filter Data Sheet














20” (50.8 cm) 3 = 222 w/ Fin E = EPDM






1Rev. 14.1




0.2µ

Diff

eren

tial P

ress

ure

(PSI

D)

4.0

3.0

2.0

1.0


0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4



0.2µm


Filter Data Sheet














20” (50.8 cm) 3 = 222 w/ Fin E = EPDM






1Rev. 14.1




0.2µ

Diff

eren

tial P

ress

ure

(PSI

D)

4.0

3.0

2.0

1.0


0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4



0.2µm




Validated Filtration Solutions To Industry Leaders® Validated Filtration Solutions To Industry Leaders®

11


Filter Data Sheet

High Purity - Electronics Grade Nylon 6,6 and Plus+ Nylon 6,6Hydrophilic Nylon 6,6 for Electronics Applications

Electronics Grade Nylon 6,6 Cartridges aredesigned to meet the special needs of the electronics and high purity chemical industries. GEHNY cartridges are available in both standard and Plus+ grades. The Plus+ grade membrane is modified with a highly positive charge; allowing for the removal of particles that are significantly smaller than the membrane’s rating. Each cartridge is flushed to 18 MΩ with UPW and 100% integrity tested to deliver ultra-clean effluent as well as ultra-low extractables. The Extended Area option (GEHNYX) offers up to 40% more surface area. This additional area results in significant increases in flowrate and loading-capacity in the same footprint.

Typical Applications• Drinking Water• Wine• Soft Drinks• Pharmaceutical• Fermentation


multiple cycles







1




Rev. 14.1

GEHNY Rating (µ) A Length C End Cap Style O-Rings/Gaskets - Adders

GEHNY+ 0.03 10” (25.4 cm) 2 = DOE Flat Gasket B = Buna I = Stainless Steel Insert

GEHNYX 0.05 20” (50.8 cm) 3 = 222 w/ Fin E = EPDM CS = 316ss Compression Spring

GEHNY+X 0.1 30” (76.2 cm) 4 = 222 w/ Flat Cap S = Silicone




0.8

1.2



0.03 0.75 (2.9 lpm)

0.05 0.8 (3.0 lpm)

0.1 1.2 (4.5 lpm)

0.2 2.4 (9.1 lpm)

0.45 4.0 (15.1 lpm)

0.65 6.0 (22.7 lpm)

0.8 6.5 (24.6 lpm)

1.2 7.0 (26.5 lpm)* Data represents GEHNY. For GEHNYX option, multiply given flowrate by 1.4.


Filter Data Sheet

High Purity - Food and Beverage Grade Nylon 6,6 and Plus+ Nylon 6,6Hydrophilic Nylon 6,6 for the Food and Beverage Industry

Food and Beverage Grade Nylon 6,6 Cartridges have been designed to comply with all FDA requirements for the food industry. GFHNY cartridges are available in both standard and Plus+ grades. The Plus+ grade membrane is modified with a highly positive charge; allowing for the removal of particles that are significantly smaller than the membrane’s rating (such as endotoxins). Each cartridge is flushed with high purity DI water and 100% integrity tested to deliver clean effluent as well as low extractables.The Extended Area option (GFHNYX) offers up to 40% more surface area. This additional area results in significant increases in flowrate and loading-capacity in the same footprint.

• Drinking Water• Wine• Soft Drinks


multiple cycles







1




Rev. 14.1

• Pharmaceutical• Fermentation• Endotoxin Removal


GFHNY Rating (µ) A Length C End Cap Style O-Rings/Gaskets - Adders

GFHNY+ 0.03 10” (25.4 cm) 2 = DOE Flat Gasket B = Buna I = Stainless Steel Insert

GFHNYX 0.05 20” (50.8 cm) 3 = 222 w/ Fin E = EPDM CS = 316ss Compression Spring

GFHNY+X 0.1 30” (76.2 cm) 4 = 222 w/ Flat Cap S = Silicone




0.8

1.2



0.03 0.75 (2.9 lpm)

0.05 0.8 (3.0 lpm)

0.1 1.2 (4.5 lpm)

0.2 2.4 (9.1 lpm)

0.45 4.0 (15.1 lpm)

0.65 6.0 (22.7 lpm)

0.8 6.5 (24.6 lpm)

1.2 7.0 (26.5 lpm)

* Data represents GFHNY. For GFHNYX option, multiply given flowrate by 1.4.





Filter Data Sheet

High Purity - General Grade PTFEHydrophobic Teflon® Membrane for Liquid and Air Applications



1

General Grade PTFE Cartridges are designed

for multi-purpose use wherever a cost effective

PTFE membrane cartridge is required. GGPTFE

series cartridges are hydrophobic and resist

wetting in critical air/vent applications. Priced

well below special purpose PTFE membrane

cartridges, General Grade PTFE cartridges

are still manufactured with the same careful

attention to quality and performance.

The Extended Area option (GGPTFEX) offers up

to 40% more surface area. This additional area

results in significant increases in flowrate and

loading capacity in the same footprint.

Construction MaterialsMembrane ......................................................Teflon®Support Media ..............................PolypropyleneEnd Caps ...........................................PolypropyleneCenter Core .....................................PolypropyleneOuter Support Cage ....................PolypropyleneO-Rings/Gaskets .............Buna, EPDM, Silicone,



multiple cycles





Typical Applications• Aggressive Fluids• Fermentation Feed Air• Venting• Photo-resists• Inert gases


Rev. 14.1


GGPTFE Rating (µ) A Length C End Cap Style O-Rings/Gaskets - Adders

GGPTFEX 0.1 10” (25.4 cm) 2 = DOE Flat Gasket B = Buna I = Stainless Steel Insert





16 = 213 Internal O-Ring Z = Teflon® Encapsulated Silicone



0.1 1.25 (4.7 lpm)

0.2 2.8 (10.6 lpm)

0.45 5.7 (21.5 lpm)

*Data represents GGPTFE. For GGPTFEX option, multiply given flowrate by 1.4.

Filter Data Sheet

High Purity- Electronics Grade PTFEPTFE Membrane Cartridges for High Purity Process Fluids in Microelectronics Applications

Typical Applications• Solvent filtration

• Etching bath solutions

• High purity rinse water

• Photochemical solutions

• Bulk chemical delivery

• Ultrapure electronics - grade gases

Construction MaterialsMembrane .......................................................... PTFESupport Layers ..............................PolypropyleneCage/Core/Adapters ...................PolypropyleneSeals .....................................Buna, EPDM, Silicone,





EPTFE Rating (µ) A Length, Nominal C End Cap Style O-Rings/Gaskets Options

EPTFEX 0.02 / 20 (nm) 10” (25.4 cm) 2 = DOE Flat Gasket B = Buna-N I = Stainless Steel Insert

0.03 / 30 (nm) 20” (50.8 cm) 3 = 222 w/ Fin E = EPDM W = Wet-Packed






1Rev. 14.1

Maximum Recommended Operating ConditionsTemperature ....................................... 176°F (80°C)Forward .................50 PSI (3.4 bar) at 68˚F (20°C)

7 PSI (0.5 bar) at 176°F (80°C)Reverse ................. 40 PSI (2.7 bar) at 68°F (20°C)

7 PSI (0.5 bar) at 176°F (80°C)

EPTFE Electronics Grade filter cartridges

provide superior chemical resistance for

high-purity microelectronics applications

requiring contaminant removal to 0.02µ.

The EPTFE Series offers consistent removal

of contaminants from aggressive fluids and

organic solvents. In air and gas applications,

the single-layer PTFE membrane, delivers

superior hydrophobicity to polypropylene

or PVDF; offering the best option to prevent

water retention, flow blockage and microbial

growth. The extend-area option offers up to

40% more surface area. This additional area


loading capacity in the same footprint. Cartridges are available with wet-pack option

(60/40 IPA/DI water solution) to eliminate the

need to wet-out in the environment.

Diff

eren

tial P

ress

ure

(PSI

D)

8.0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0


IntegrityEach cartridge is flushed to 18MΩ UPW and

100% integrity tested to deliver ultra-clean

effluent as well as ultra-low extractables.


0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4


* Data represents EPTFE. For EPTFEX, multiply given flow rate by 1.4.

?


0.02µm

0.03µm

0.05µm

0.1µm

0.2µm

NEW

Filter Data Sheet

High Purity- Electronics Grade PTFEPTFE Membrane Cartridges for High Purity Process Fluids in Microelectronics Applications

Typical Applications• Solvent filtration

• Etching bath solutions

• High purity rinse water

• Photochemical solutions

• Bulk chemical delivery

• Ultrapure electronics - grade gases

Construction MaterialsMembrane .......................................................... PTFESupport Layers ..............................PolypropyleneCage/Core/Adapters ...................PolypropyleneSeals .....................................Buna, EPDM, Silicone,





EPTFE Rating (µ) A Length, Nominal C End Cap Style O-Rings/Gaskets Options

EPTFEX 0.02 / 20 (nm) 10” (25.4 cm) 2 = DOE Flat Gasket B = Buna-N I = Stainless Steel Insert

0.03 / 30 (nm) 20” (50.8 cm) 3 = 222 w/ Fin E = EPDM W = Wet-Packed






1Rev. 14.1

Maximum Recommended Operating ConditionsTemperature ....................................... 176°F (80°C)Forward .................50 PSI (3.4 bar) at 68˚F (20°C)

7 PSI (0.5 bar) at 176°F (80°C)Reverse ................. 40 PSI (2.7 bar) at 68°F (20°C)

7 PSI (0.5 bar) at 176°F (80°C)

EPTFE Electronics Grade filter cartridges

provide superior chemical resistance for

high-purity microelectronics applications

requiring contaminant removal to 0.02µ.

The EPTFE Series offers consistent removal

of contaminants from aggressive fluids and

organic solvents. In air and gas applications,

the single-layer PTFE membrane, delivers

superior hydrophobicity to polypropylene

or PVDF; offering the best option to prevent

water retention, flow blockage and microbial

growth. The extend-area option offers up to

40% more surface area. This additional area


loading capacity in the same footprint. Cartridges are available with wet-pack option

(60/40 IPA/DI water solution) to eliminate the

need to wet-out in the environment.

Diff

eren

tial P

ress

ure

(PSI

D)

8.0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0


IntegrityEach cartridge is flushed to 18MΩ UPW and

100% integrity tested to deliver ultra-clean

effluent as well as ultra-low extractables.


0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4


* Data represents EPTFE. For EPTFEX, multiply given flow rate by 1.4.

?


0.02µm

0.03µm

0.05µm

0.1µm

0.2µm





Filter Data Sheet

High Purity - Hydrophobic Polysulfone (PSH) MembraneHydrophobic Polysulfone Membrane for Air/Gas Applications



1

Hydrophobic Polysulfone Membrane Cartridges provide a highly cost-effective alternative to PTFE or PVDF membrane cartridges for air, bulk gas, and tank vent applications. PSH cartridges offer high moisture resistance and high flowrates at low pressure drops. Constructed using high purity polypropylene hardware and the latest thermal-bonding equipment, PSH series cartridges offer an outstanding value.

Construction MaterialsMembrane ................. Hydrophobic PolysulfoneSupport Media ..............................PolypropyleneEnd Caps ...........................................PolypropyleneCenter Core .....................................PolypropyleneOuter Support Cage ....................PolypropyleneO-Rings/Gaskets .............Buna, EPDM, Silicone,



multiple cycles

Chemicals: Cartridges are chemically com-patible with most chemicals and sanitizing agents.Note: Stainless steel insert option needed for all cartridges being hot water sanitized or steam sterilized.






0 20 40 60 80 100 120

3.0

2.0

1.0

0.0

Del

ta-P

(PSI

D)

Air Flow Rateper 10” cartridge

Air Flow Rate (SCFM)


0.02µ

0.03µ

Typical Applications• Tank Vent• Fermentation• Air, Nitrogen, Other Inert Gases

Rev. 14.1

PSH Rating (µ) A Length C End Cap Style O-Rings/Gaskets - Adders



30” (76.2 cm) 4 = 222 w/ Flat Cap S = Silicone CS = 316ss Compression Spring



16 = 213 Internal O-Ring Z = Teflon® Encapsulated Silicone



Filter Data Sheet

High Purity- Pharmaceutical Grade PTFEHydrophobic PTFE Membrane Cartridges for Sterilizing in Pharmaceuticals & Biotechnology Applications

Typical Applications• Sterile gas filtration of fermentor inlets• Off‐gassing downstream of fermentors and bioreactors• Autoclave vent filters• WFI tank vents• Sterile air supply for service gases (i.e. filling lines in blow‐fill‐seal systems)

Construction MaterialsMembrane .......................................................... PTFEPrefiltration Media ......................PolypropyleneSupport Layers ..............................PolypropyleneCage/Core/Adapters ...................PolypropyleneSeals .....................................Buna, EPDM, Silicone,


Sanitization/SterilizationIn-Line Steaming ........134°C, 30 min., max. ΔP

7 psiHot Water ...... 85°- 95°C, 30 min., max. ΔP 7 psi





PPTFE Rating (µ) A Length, Nominal C End Cap Style O-Rings/Gaskets0.2 5” (12.7 cm) 2 = DOE Flat Gasket B = Buna-N

10” (25.4 cm) 3 = 222 w/ Fin E = EPDM



40” (101.6 cm) 7 = 226 w/ Fin T = Teflon® Encapsulated Viton®



1Rev. 14.1

Maximum Recommended Operating ConditionsTemperature ................248°F (120°C) at 20 PSID Forward ....................72 PSI (5 bar) at 68˚F (20°C)

7 PSI (0.5 bar) at 284°F (140°C)Reverse .....................44 PSI (3 bar) at 68°F (20°C)

7 PSI (0.5 bar) at 284°F (140°C)


0 50 100 150 200 250 300


Del

ta-P

(PSI

D)

5.0

4.0

3.0

2.0

1.0

0.0

PPTFE Pharmaceutical Grade sterilizing

filter cartridges provide optimized filtration

performance in sterile air/gas and venting

applications. The single layer PTFE membrane,

with over double the hydrophobicity of

polypropylene or PVDF, is the best choice

to prevent water intrusion and resulting

microbial growth.

Each PPTFE cartridge is integrity tested

during manufacturing and is supported by a

validation guide for regulatory compliance.

PPTFE elements are fully validated as

sterilizing grade filters in liquids in accordance

with HIMA and ASTM F838-05 guidelines and

in gases through full retention of the MS2

phage in an aerosol challenge.

Forward Reverse5”

10”20”30”

Air Flow Rateper 10” Cartridge


NEW


20


Filter Data Sheet

High Purity- Pharmaceutical Grade PTFEHydrophobic PTFE Membrane Cartridges for Sterilizing in Pharmaceuticals & Biotechnology Applications

Typical Applications• Sterile gas filtration of fermentor inlets• Off‐gassing downstream of fermentors and bioreactors• Autoclave vent filters• WFI tank vents• Sterile air supply for service gases (i.e. filling lines in blow‐fill‐seal systems)

Construction MaterialsMembrane .......................................................... PTFEPrefiltration Media ......................PolypropyleneSupport Layers ..............................PolypropyleneCage/Core/Adapters ...................PolypropyleneSeals .....................................Buna, EPDM, Silicone,


Sanitization/SterilizationIn-Line Steaming ........134°C, 30 min., max. ΔP

7 psiHot Water ...... 85°- 95°C, 30 min., max. ΔP 7 psi




PPTFE Rating (µ) A Length, Nominal C End Cap Style O-Rings/Gaskets0.2 5” (12.7 cm) 2 = DOE Flat Gasket B = Buna-N

10” (25.4 cm) 3 = 222 w/ Fin E = EPDM



40” (101.6 cm) 7 = 226 w/ Fin T = Teflon® Encapsulated Viton®


Maximum Recommended Operating ConditionsTemperature ................248°F (120°C) at 20 PSID Forward ....................72 PSI (5 bar) at 68˚F (20°C)

7 PSI (0.5 bar) at 284°F (140°C)Reverse .....................44 PSI (3 bar) at 68°F (20°C)

7 PSI (0.5 bar) at 284°F (140°C)


0 50 100 150 200 250 300


Del

ta-P

(PSI

D)

5.0

4.0

3.0

2.0

1.0

0.0

PPTFE Pharmaceutical Grade sterilizing

filter cartridges provide optimized filtration

performance in sterile air/gas and venting

applications. The single layer PTFE membrane,

with over double the hydrophobicity of

polypropylene or PVDF, is the best choice

to prevent water intrusion and resulting

microbial growth.

Each PPTFE cartridge is integrity tested

during manufacturing and is supported by a

validation guide for regulatory compliance.

PPTFE elements are fully validated as

sterilizing grade filters in liquids in accordance

with HIMA and ASTM F838-05 guidelines and

in gases through full retention of the MS2

phage in an aerosol challenge.

Forward Reverse5”

10”20”30”

Air Flow Rateper 10” Cartridge


Rev. 14.0





Filter Data Sheet



1

HF Series High Flow Cartridges address your need for absolute rated filter cartridges in high flowrate applications. HF Series cartridges are designed for use as a direct replacement to the Highflow Ultipleat® and 3M 740 series elements. Filtration efficiencies exceed 99%.

Construction MaterialsFiltration Media ............................Polypropylene

or MicroglassSupport Media ..............................PolypropyleneEnd Caps ...........................................PolypropyleneCenter Core .....................................PolypropyleneOuter Support Cage ....................PolypropyleneO-Rings/Gaskets ...............................Buna, EPDM,

Viton®, Silicone

DimensionsLength:HF - 20, 40, 60 inchesHF3 - 39 inches Outside Diameter:6.25 inches

Maximum Recommended Operating ConditionsDifferential Pressure ................................... 35 PSI Polypropylene ...................................160ºF (71ºC)Microglass ...........................................200ºF (93ºC)


HF Series High Flow CartridgesPleated Polypropylene and Microglass

ΔP is based on a 20” filter cartridge* Pressure Drop for 40” element multiply by 0.5* Pressure Drop for 60” element multiply by 0.34

Rev. 14.1


Type Material Rating (µ) A Length O-Rings

HF PP - Polypropylene 1.0 20” = HF (50.8 cm) B = Buna

RetrofitsPall HF

FG - Microglass 5.0 39” = HF3 (99.1 cm) E = EPDM

10.0 40” = HF (101.6 cm) S = Silicone

HF3 20.0 60” = HF (152.4 cm) V = Viton®

Retrofits3M - 740

50.0

100.0

Clean Pressure Drop Versus Flow Rate (PSID)1 micron 5 micron 10 micron 20 micron 50 micron 100 micron

ΔP @ 40 GPM 2.0 1.0 0.5 0.3 0.2 0.2

ΔP @ 60 GPM 4.0 1.5 0.8 0.5 0.3 0.3

ΔP @ 80 GPM 5.0 2.0 1.2 0.7 0.5 0.5


Filter Data Sheet

High Purity - FluoroClear Pleated All-Fluorocarbon

FluoroClear Cartridges are designed for highly aggressive wet-etch and cleaning applications. FluoroClear cartridges are constructed with 100% fluorocarbon materials, providing broad chemical compatibility and temperature resistance. The PTFE membrane delivers high flow rates and high purity effluent at low pressure drops. Cartridges are available as flushed & dried or as wet-packed (High Purity DI water/hydrogen peroxide solution). FluoroClear cartridges are manufactured in a cleanroom environment to ensure product cleanliness.

Typical Applications• Wet-etch & cleaning chemicals: - Sulfuric Acid - Hydrofluoric Acid - Phosphoric Acid - Nitric Acid• Photo-resists• Ozonated Process Streams

Sanitization/SterilizationFluoroClear cartridges may be sanitized using compatible chemical agents.FluoroClear cartridges may not be autoclaved or steam sterilized.



ToxicityAll components meet the specifications for biological safety per USP Class VI – 121˚C for plastics.



1

Construction MaterialsMembrane .......................................................... PTFESupport Media .............................................. ECTFEEnd Caps ........................................................... ECTFECenter Core ..................................................... ECTFEOuter Support Cage .................................... ECTFEO-Rings/Gaskets ............. Teflon® Encapsulated

Viton®

Maximum Differential PressuresForward ..............60 PSI (4.14 bar) at 70˚C (21˚C)Reverse ...............30 PSI (2.07 bar) at 70˚C (21˚C)

Liquid Flow Specifications

Maximum Recommended Operating ConditionsTemperature ..................................... 215˚F (102˚C)

Integrity Testing0.05µ ≤ 5 cc \ min at 40 psig (2.76 bar) 0.1µ ≤ 5 cc \ min at 40 psig (2.76 bar)0.2µ ≤ 5 cc \ min at 30 psig (2.07 bar)0.45µ ≤ 5 cc \ min at 20 psig (1.38 bar)1µ ≤ 5 cc \ min at 15 psig (1.38 bar)

Rev. 14.1

GFL Rating (µ) A Length C End Cap Style O-Rings/Gaskets - Adders

0.05 10” (25.4 cm) 2 = DOE Flat Gasket T = Teflon® Encapsulated Viton® E = Flushed & Dried

0.1 20” (50.8 cm) 3 = 222 w/ Fin Z = Teflon® Encapsulated Silicone W = Wet-Packed

0.2 30” (76.2 cm) 4 = 222 w/ Flat Cap

0.45 40” (101.6 cm) 6 = 226 w/ Flat Cap

1.0 7 = 226 w/ Fin



0.05 0.7 (2.65 lpm)

0.1 1.75 (6.6 lpm)

0.2 3.2 (12.1 lpm)

0.45 4.3 (16.2 lpm)

1.0 5.7 (21.6 lpm)





Filter Data Sheet

Thermally-bonded polyolefin fibers are

used in the construction of Global Filter’s

Bi-component series filter cartridges. The

unique fiber-to-fiber bond forms a very stable

porosity. The patented construction process of

these Bi-Component filter cartridges provides

consistent filtration and eliminates pore size

variability and media migration.

The rigid construction also provides a

3-dimensional fiber network that offers a high

tolerance to differential pressures. This unique

feature also prevents changes in fiber matrix

throughout the life of the filter. This delivers

consistently precise filtration and ensures

against contaminant unloading.

PurityGPB series filter cartridges are free of additives,

wetting agents, binders and silicone.

DimensionsLength:9.75 to 40 inches (24.8 to 102 cm) nominal Outside Diameter:2.6 inches (6.6 cm)Inside Diameter:1.1 inch (2.8 cm)




24

Construction MaterialsFiltration Media .....................................PolyolefinEnd Caps ...........................................Polypropylene

Maximum Recommended Operating ConditionsDifferential Pressure ....................................80 PSITemperature ........................................176˚F (80˚C)

Bi-Component Filter Cartridge - GPBThermally-Bonded Polyolefin Filter Cartridge

Typical Applications• R.O. Pre-Filtration• Food and Beverage• Paints and Coatings

• High-purity Inks• Resins• Particle Classifications


GPB Rating (µ) - Length - End Cap Style O-Rings/Gaskets

Polyolefin 1 (Cuno “A”) 9.75” (24.76 cm) Blank = None Blank = None

3 (Cuno “B”) 10” (25.4 cm) 2 = DOE Flat Gasket B = Buna

5 (Cuno “C”) 19.5” (49.53 cm) 3 = 222 w/Fin E = EPDM

10 (Cuno “D”) 20” (50.8 cm) 4 = 222 w/Flat Cap S = Silicone

25 (Cuno “E”) 29.25” (74.29 cm) 5 = 222 w/Spring V = Viton®

50 (Cuno “G”) 30” (76.2 cm) 6 = 226 w/Flat Cap P = Polyfoam

75 (Cuno “L”) 39” (99.1 cm) 7 = 226 w/Fin

100 (Cuno “Q”) 40” (101.6 cm) 8 = 226 w/Spring

150 (Cuno “W”) 9 = SOE w/ Spring

200 10 = DOE w/ Core Extender

350

Rev. 14.0


Filter Data Sheet

HFB Series High Flow Pleated Filter CartridgesFor Installation in Bag Filter Vessels


Global Filter LLC . 7201 Mt. Vernon Rd. SE . Cedar Rapids, IA 52403Phone: (319) 743-0110 . Fax: (319) 743-0220 . Toll Free: 877-603-1003 . www.globalfilter.comRev. 14.1 1

HFB Series high flow pleated filter cartridges seal into most standard bag filter vessels. These cartridges deliver high efficiencies, flow-rates, and loading capacities at extremely low initial pressure drops. Due to the inside to outside flow design, all contaminants are captured on the inside of the element, avoiding potential contamination of filtered product during change-out. Utilizing polypropylene and microglass medias along with polypropylene hardware, the HFB series offers broad chemical compatibility. With up to 48.5 ft2 of media, the HFB series offers an exceptional value.

Construction MaterialsFiltration Media .......................Polypropylene or

Microglass

Support Media .........................Polypropylene or

Polyester

End Caps ...........................................Polypropylene

Center Core .....................................Polypropylene

Outer Netting/Wrap ....................Polypropylene

DimensionsLength:12 inches (#1-size)24 inches (#2-size)Outside Diameter:7.06 inches (flange) / 6 inches (cartridge)

Maximum Recommended Operating ConditionsTemperature ....................................... 140°F (60°C)

Change Out ................................................. 25 PSID


Water Flow Rate @ 70°F (LPM)per 24” cartridge

Typical Application• Process Water• Deionized Water• R.O. Membrane Pre-Filtration• Food & Beverage• Cosmetics• Fine Chemicals• Produced Water• Waste Water

• Amines

HFB Material Rating (µ) Retention Size Flange Style Hardware O-Rings (For B-Flange Only)

PP = Polypropylene 0.45 20.0 A = Absolute 1 = #1-size A = Global, FSI, Eaton, Rosedale P = Polypropylene B = Buna-N

FG = Microglass 1.0 40.0 N = Nominal 2 = #2-size B = Pentair S = Silicone

2.0 E = EPDM

5.0 V = Viton

10.0



ToxicityAll polypropylene components meet the specifications for biological safety per USP Class VI-121°C for plastics.


HFB-PP 0.45µ

HFB-PP 1.0µ

HFB-PP 2.0, 5.0µ

HFB-PP 10.0, 20.0µ

HFB-PP 40.0µ

HFB-FG 0.45µ

HFB-PP 1.0, 2.0µ

HFB-FG 5.0, 10.0µ

HFB-FG 20.0, 40.0µ

Diff

eren

tial P

ress

ure

(PSI

D)

4.0

3.0

2.0

1.0

0.0 0 1 2 3 4 5 6 7 8

Water Flow Rate @ 70°F (GPM)

0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4

NEW





Filter Data Sheet

DimensionsLength ...............................................10 & 20 inchesOutside Diameter..................................4.5 inchesInside Diameter ........................................ 1 inches




26

Construction MaterialsFiltration Media ............................Polypropylene

Water Grade BB - Size Polypropylene Meltblown Cartridge - GWTB

• Unique & proprietary process delivers

superior efficiency, life and economy

• Excellent compatibility with a wide range of

chemicals

• Graded density pore structure enhances dirt

holding capacity

• Easy cartridge incineration and disposal

• All polypropylene construction

Cross - ReferencePentek®:DGD2501 = GWTB1DGD5005 = GWTB5DGD7525 = GWTB25GE®:LD01 = GWTB1LD05 = GWTB5LD10 = GWTB10LD20 = GWTB20LD30 = GWTB30LD50 = GWTB50

Performance SpecificationsMicron Ratings:1, 3, 5, 10, 20, 25, 30, 50, 75, 100Efficiencies: 80%

PurityGWTB series filter cartridges are free of additives, wetting agents, binders and silicone.

Maximum Recommended Operating ConditionsForward ...........................................................35 PSIDReverse ............................................................25 PSIDChange Out Differential Pressure ......20 PSIDTemperature ....................................... 140°F (60°C)

Liquid Flow Specifications(Based on 10” Cartridges)Micron GPM/PSID1,3,5 .............................................................................1010,20,25,30 ................................................................1250,75,100 ...................................................................15


GWTB Rating (µ) BB Length

Water Grade 1 3 BB = 4.5” OD 10”

5 10 20”

20 25

30 50

75 100

Rev. 14.0


Filter Data Sheet



25

Water Grade Polypropylene Meltblown Cartridge - GWTB

• Unique & proprietary process delivers superior efficiency, life and economy

• Excellent compatibility with a wide range of chemicals

• Graded density pore structure enhances dirt holding capacity

• Easy cartridge incineration and disposal• All polypropylene construction• All end configurations available (glued or

thermally-bonded)

Flow Rate (GPM), Water at 68° (20°C)

Diff

eren

tial P

ress

ure

(PSI

D)


0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4.45

.4

.35

.3

.25

.2

.15

.1

.05

0

Bar (

x100

= k

Pa)

0 1 2 3 4 5 6 7 8

.03

.02

.01

0

Construction MaterialsFiltration Media ............................PolypropyleneEnd Caps ...........................................PolypropyleneO-Rings/Gaskets ...........................Silicone, Buna,

Polyfoam, EPDM, Viton®

Performance SpecificationsMicron Ratings:1, 3, 5, 10, 20, 30, 50, 75, 100Efficiencies:Water Grade = 80%


PurityGWTB series filter cartridges are free of additives, wetting agents, binders and silicone.

Maximum Recommended Operating ConditionsForward ..........................................................35 PSIDReverse ...........................................................25 PSIDChange Out Differential Pressure .....20 PSIDTemperature ....................................... 140°F (60°C)

Dimensions (Nominal)Length .......................................... 9.75 to 40 inches

(24.8 to 102 cm)Outside Diameter.................2.5 inches (6.4 cm)Inside Diameter ............................1 inch (2.6 cm)


GWTB Rating (µ) A Length - End Cap Style O-Rings/Gaskets - End Caps

Water Grade 1 A = 2.5” OD 9.75” (24.76cm) 2 = DOE Flat Gasket B = Buna Blank = Glued

3 9.875” (25.08 cm) 3 = 222 w/Fin E = EPDM TB = Thermally-Bonded

5 10” (25.4 cm) 4 = 222 w/Flat Cap S = Silicone CS = 316ss CompressionSpring (TB ONLY)

10 19.5” (49.53 cm) 5 = 222 w/Spring V = Viton® PC = Polypropylene core

20 20” (50.8 cm) 6 = 226 w/Flat Cap P = Polyfoam (Gaskets)

30 29.25” (74.29 cm) 7 = 226 w/Fin

50 29.5” (74.93 cm) 8 = 226 w/Spring

75 30” (76.2 cm) 9 = SOE w/ Spring

100 39” (99.1 cm) 10 = DOE w/Core Extender

40” (101.6 cm) 20 = SOE PP Ext. w/Spring


Rev. 14.0





Filter Data Sheet



28

• Controlled fiber diameter and density maximizes removal efficiency and ensures consistent performance



thermally-bonded)• Resists contaminant unloading, even at

elevated differential pressures• Grooved exterior increases surface area

Construction MaterialsFiltration Media ............................PolypropyleneEnd Caps ...........................................PolypropyleneO-Rings/Gaskets .............Buna, EPDM, Silicone,

Viton®, Polyfoam

Performance SpecificationsMicron Ratings:1, 3, 5, 10, 20, 30, 50, 75, 100Efficiencies:1 Micron: 95%5-100 Micron: 99%


PurityGATB series filter cartridges are free of additives, wetting agents, binders and silicone.




Ordering InformationGATB Rating (µ) A Length - End Cap Style O-Rings/Gaskets - End Caps

Absolute Grade 1 9.75” (24.76cm) 2 = DOE Flat Gasket B = Buna Blank = Glued


5 10” (25.4 cm) 4 = 222 w/Flat Cap S = SiliconeCS = 316ss Compression

Spring (TB ONLY)

10 19.5” (49.53 cm) 5 = 222 w/Spring V = Viton®


30 29.25” (74.29 cm) 7 = 226 w/Fin

50 29.5” (74.93 cm) 8 = 226 w/Spring

75 30” (76.2 cm) 9 = SOE w/ Spring

100 39” (99.1 cm) 10 = DOE w/PP Core Extender

40” (101.6 cm) 20 = SOE PP Ext. w/Spring

Absolute Grade Polypropylene Meltblown Cartridge - GATB


Diff

eren

tial P

ress

ure

(PSI

D)


0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4.45

.4

.35

.3

.25

.2

.15

.1

.05

0

Bar (

x100

= k

Pa)

0 1 2 3 4 5 6 7 8

.03

.02

.01

0


Rev. 14.0


Filter Data Sheet



High Performance Grade Polypropylene Meltblown Cartridge - GCTB

• Unique & proprietary process delivers superior efficiency, life and economy


• Graded density pore structure enhances dirt holding capacity


thermally-bonded)


Diff

eren

tial P

ress

ure

(PSI

D)


0 3.8 7.6 11.4 15.2 19.0 22.8 26.6 30.4.45

.4

.35

.3

.25

.2

.15

.1

.05

0

Bar (

x100

= k

Pa)

0 1 2 3 4 5 6 7 8

.03

.02

.01

0

Construction MaterialsFiltration Media ............................PolypropyleneEnd Caps ...........................................PolypropyleneO-Rings/Gaskets ...........................Silicone, Buna,

Polyfoam, EPDM, Viton®

Performance SpecificationsMicron Ratings:1, 3, 5, 10, 20, 30, 50, 75, 100Efficiencies:High Performance Grade = 90%


PurityGCTB series filter cartridges are free of additives, wetting agents, binders and silicone.




27


GCTB Rating (µ) A Length - End Cap Style O-Rings/Gaskets - End Caps

High Performance Grade

1 A = 2.5” OD 9.75” (24.76cm) 2 = DOE Flat Gasket B = Buna Blank = Glued


5 10” (25.4 cm) 4 = 222 w/Flat Cap S = SiliconeCS = 316ss Compression

Spring (TB ONLY)

10 19.5” (49.53 cm) 5 = 222 w/Spring V = Viton® PC = Polypropylene Core


30 29.25” (74.29 cm) 7 = 226 w/Fin

50 29.5” (74.93 cm) 8 = 226 w/Spring

75 30” (76.2 cm) 9 = DOE w/Spring

100 39” (99.1 cm) 10 = DOE w/ PP Core Extender

40” (101.6 cm) 20 = DOE PP Ext. w/Spring


Rev. 14.0





Filter Data Sheet



30

Wound Depth Cartridge

• Available in a wide variety of lengths and micron ratings from 9.75 to 50 inches and 0.5-400 µ

• Medias to fit all applications including: FDA polypropylene, bleached cotton, FDA bleached cotton, natural cotton, polyester, nylon and glass

• Core materials include: polypropylene, 304 & 316 stainless steel, tin and glass

• Performance-enhancing end-configurations available to fit every process requirement

Construction MaterialsFiltration Media ...................................... See TableEnd Caps ...........................................PolypropyleneCore ............................................................... See TableO-Rings/Gaskets ...............................Buna, EPDM,

Silicone, Viton®, Polyfoam, Teflon®

Maximum Recommended Operating ConditionsDifferential Pressure ....................................25 PSITemperature ............................. Dependent upon

materials of construction



4.5 inches (11.4 cm)

Typical Applications• Chemicals • Pharmaceutical• Consumer Products • Photographic• Food and Beverage • Plating Solutions• Oils • Vegetable Oils• Paints • Water• Inks • Waste Treatment• Petro Chemicals

1 µ

5 µ

10 µ25 µ

Flow Rate (GPM), Water at Ambient

Diff

eren

tial P

ress

ure

(PSI

D)


4.5

1.5

2.0

2.5

3.0

3.5

4.0

1.0

0

0.5

0 12108642 14 16


G Media Rating (µ) Diameter Length Core End Cap Style O-Rings/Gaskets

P = FDA Polypropylene 0.5 1 A = 2.5 9.75” (24.76cm) P = Polypro 2 = DOE Flat Gasket B = Buna

C = Bleached Cotton 3 5 BB = 4.5 9.875” (25.08 cm) A = 304 SS 3 = 222 w/Fin E = EPDM

CC = FDA Bleached Cotton 10 20 10” (25.4 cm) S = 316 SS 4 = 222 w/Flat Cap S = Silicone

CN = Natural Cotton 25 30 19.5” (49.53 cm) T = Tin 5 = 222 w/Spring V = Viton®

PE = Polyester 50 75 20” (50.8 cm) FG = Glass 6 = 226 w/Flat Cap P = Polyfoam

N = Nylon 100 200 29.25” (74.26 cm) 7 = 226 w/Fin T = Teflon®

G = Glass 250 400 30” (76.2 cm) 8 = 226 w/Spring

39” (99.1 cm) 9 = DOE w/ Spring

40” (101.6 cm) 10 = DOE w/PP Core Extender

50” (127 cm)10K = DOE w/ Crimped Ext. Core10X = DOE w/ SS Core Extender

Rev. 14.0


Filter Data Sheet



29

Resin - Bonded Cartridge

Features• Micron ratings from 2 to 150• High dirt holding capacity• Broad chemical compatibility• Rigid construction is ideal for high viscosity applications

Filtration Media ...............................Polyester & acrylic fibers with phenolic resinCore ............................................................................................. NoneEnd Caps ................................................................................... None

DimensionsDifferential pressure.......................................................... 50 PSITemperature ........................................................... 250ºF (121ºC)Flow Rate ...............................5-7 GPM /10” equivalent length (aqueous fluid)

Maximum Recommended Operating ConditionsOutside Diameter......................................2.56 inches (6.5cm) Inside Diameter .................................... 1.125 inches (2.88cm)Lengths ...............................................................9.75 to 40 inches

The unique design of GRB Series Resin-Bonded cartridges offers multi-stage filtration; delivering superior removal efficiencies and loading capacities in viscous liquid applications. Spiral outer wrap and long acrylic fibers minimize fiber-shedding while increasing surface area as well as minimizing loose debris caused by machine grooved competitive products. The continuous length design eliminates potential by-pass and void spaces created by glued increments. Full 2.56 inch diameter construction offers superior depth when compared to some smaller diameter competitive products.


GRB Rating (µ) N Length - End Cap Style

2 9.75” (24.76cm) 02 = Stainless Steel Core Ext.

5 10” (25.4 cm) 9 = SOE w/Poly Spring

10 19.5” (49.53 cm) 10 = DOE w/Poly Core Ext.

25 20” (50.8 cm)

50 29.25” (74.29 cm)

75 30” (76.2 cm)

125 39” (99.1 cm)

150 40” (101.6 cm)

Rev. 14.0





Filter Data Sheet



32

Standard Felt Liquid Filter Bags

• Micron ratings from 1 to 200• All industry-standard and custom sizes available• Broad chemical compatibility• High flow/low pressure drop media• Sewn or fully-welded construction• Handles standard on all bags• Choice of steel or molded plastic snap seal rings• Temperature ratings to 275°F (PE w/S, SS or V-seal

ring) and 425°F (HT w/S or SS ring)

Glazed/singedouter finish

Felt Filter media traps contaminantswithin its depth

Plaininnerfinish

DIRTYFLUIDCLEAN

FLUID

Felt Bag MaterialsConstructed using 100% synthetic fibers in polypropylene, polyester and Nomex®. The proper combination of fiber diameters, weights and thicknesses result in economical depth filter medias. Polypropylene & polyester bags are supplied with a singed or glazed finish to reduce fiber migration.• Polypropylene and Polyester materials meet FDA regulations for food

contact under CFR21, Section 177.1520• Glazed/singed finish on polyester & polypropylene reduces fiber-shedding• Ability to remove both solid and gelatinous particles• Silicone-free construction• High dirt holding capacity• Low cost

Welded ConstructionFully-welded bags are available in glazed polypropylene and polyester felt for #1 & #2 sizes with V-seal molded plastic rings.• No needle holes, thus increasing efficiencies by preventing by-pass• Elimination of threads further reduces fiber-shedding

Felt Bag StylesS-ring bags have a galvanized steel ring (stainless steel optional) sewn into the top of the bag. They are supplied with sewn seams standard.

V-ring bags have a specially-designed, high-temperature snap seal ring sewn into the top of the bag. They are supplied with sewn seams standard (fully -welded seams available upon request).Felt Materials Rating (µ)

1 3 5 10 15 25 50 75 100 150 200

Polyester • • • • • • • • • • •

Polypropylene • • • • • • • •

Nomex® • • • • • • • •



G Media Rating (µ) Cover/Jacket Bag Dimensions Ring Style Options

PE = Polyester 1-200P = Plain (No

Cover)Size Diam. Length S = Galvanized Steel

WE = Fully-Welded(PE and PP Only)

PO = PolypropylenePEM = Polyester

Multifilament Mesh1= 7.06 16.5” SS = Stainless Steel PL = No Outer Finish

HT = Nomex® 2= 7.06 32.0” V = High-temp Plastic Snap Seal NR = No Ring

3= 4.12 8.0”C = Commercial-Style Band

(C1 & C2 only)RC = Rev. Collar (S & SS only)

4= 4.12 14.0” PP = Polypropylene (rolled) A = Automotive Seam

7= 5.5 15.0”

8= 5.5 20.0”

9= 5.5 31.0”

C1= 7.31 16.5”

C2= 7.31 32.5”

12= 8.0 30.0”

Rev. 14.0


Filter Data Sheet



31

G.E.M. Reverse Osmosis Membrane

G.E.M. Reverse Osmosis Membranes provide the high salt rejection and flow rates typically available from competitive composite membranes while providing superior value. This gives the membrane user an edge by providing reduced reverse osmosis system operating costs. The pre-filtration program offered by Global Filter, in conjunction with the G.E.M. elements, can minimize the need for costly membrane cleanings. These elements are manufactured utilizing an ISO 9001:2000 Certified Quality Management System.

Application Data*Max. Applied Pressure ...........600 PSIG (4.16 MPa) Max. Chlorine Concentration ................. <0.1 PPMMax. Operating Temperature ............113˚F (45˚C)Feedwater pH Range ................................... 3.0 - 10.0Max. Feedwater Turbidity ............................1.0 NTUMax. Feedwater SDI (15 mins) ............................ 5.0Max. Feed Flow ..........................75 GPM (17.0 m3/h)Max. Ratio of Concentrate to Permeate Flow ........................................................... 5:1Max. Pressure Drop for Each Element ....... 10 PSI

* The limitations shown here are for general use. The values may be more conservative for specific projects to ensure the best performance and longest life of the membrane.

Typical Applications • Producing boiler make-up• Water for power plants• Blow-down from power plants• Desalting of well water for municipal drinking water supplies• Reducing TDS prior to ion-exchange• Purifying water to ultrapure standards for semiconductor and microelectronics manufacturing facilities

PerformancePermeate Flow .............8,900 to 14,000 GPDSalt Rejection Minimum .........................98%

Testing ConditionsThe stated performance is initial (data taken after 30 minutes of operation), based on the following conditions:NaCI Test Solution ........................... 1500 PPMApplied Pressure .............225 PSI (1.55 MPa)Operating Temperature ............. 77˚F (25˚C)Permeate Recovery ................................... 15%pH Range ..................................................6.5 - 7.0

TypeConfiguration .............................Spiral WoundMembrane Polymer .....................Composite

PolyamideDimensions

* Weight = 36 lbs (16.4kg)Ordering Information

GEM - Diameter (Nominal) - Length - RO

8 40”

A 40.0” (1016 mm)

B 7.95” (201.9 mm)

C 1.125” (28.6 mm)

Rev. 14.0





Filter Data Sheet



34

High Efficiency Microfiber Liquid Filter Bags

High Efficiency Microfiber Filter Bags• Micron ratings from 1.0 to 50.0• All industry-standard and custom sizes available• Choice of steel or molded plastic snap seal V-rings• Broad chemical compatibility• Excellent oil-absorbing capabilities (POMF)• Handles standard on all bags• Efficiency ratings to 95.0%

High Efficiency Bag Styles• Standard ring bags have a galvanized steel ring (stainless steel optional) sewn in the top of the bag• V-ring bags have a molded plastic ring sewn to the filter bag

Inner Layer Meltblown

Microfiber

Meltblown

Outer Cover

HIGH EFFICIENCY FILTER BAG

High Efficiency Bag MaterialsMicrofiber materials provide high efficiencies at low micron ratings. Multi-layer technology results in true graded-density filtration, delivering significantly increased loading capacities and lower overall filtration costs.• Polypropylene & polyester microfiber materials meet FDA regulations for food contact under CFR21, Section 177.1520• Silicone-free construction• High dirt holding capacity

High Efficiency Materials (95.0%) Rating (µ)

1A 2A 5A 10A 25A 50A

Polyester • • • • • •

Polypropylene • • • • • •



G Media Rating (µ) Cover/Jacket Bag Dimensions Ring Style

PEMF = Polyester 1A P = Standard Size Diam. Length S = Standard Steel Ring

POMF = Polypropylene 2A 1= 7.06 16.5” SS = Stainless Steel Ring

5A 2= 7.06 32.0” V = High-temp Plastic Snap Seal

10A 3= 4.12 8.0” C = Commercial-Style Band (C1 & C2 only)

25A 4= 4.12 14.0” PP = Polypropylene (rolled)

50A 7= 5.5 15.0”

8= 5.5 20.0”

9= 5.5 31.0”

C1= 7.31 16.5”

C2= 7.31 32.5”

12= 8.0 30.0”

Rev. 14.0


Filter Data Sheet



33

Standard Mesh Liquid Filter Bags

Multifilament Mesh media is woven from threads made of smaller fibers. Bags made from this material are low cost and disposable.

Monofilament Mesh is woven from single-fiber threads. The openings are square and uniform. Bags made from this material have excellent strength and some are cleanable.

Mesh Bag Materials

CLEAN FLUID DIRTY FLUID

Mesh Bag StylesS-ring bags have a galvanized steel ring (stainless steel optional) sewn into the top of the bag. They are supplied with sewn seams standard. V-ring bags have a specially-designed, high-temperature snap seal ring sewn into the top of the bag. They are supplied with sewn seams standard.

• Micron ratings from 1 to 1500• All industry-standard and custom sizes available• High flow/low pressure drop media• Surface-retention filtration• Wide chemical compatibility• Sewn construction• Handles standard on all bags• Non-fiber shedding• High removal efficiency• Temperature ratings to 400ºF (204ºC)• Silicone-free construction• Economical removal of non-deformable contaminants• Choice of steel or molded plastic snap seal rings• Meet FDA regulations for contact under Title 21, Section 177.1520



G Media Rating (µ) Cover/Jacket Bag Dimensions Ring Style Options

NMO = Nylon Monofilament 1-1500 P = Plain (No Cover) Size Diam. Length S = Standard Steel Ring NR = No Ring

POMO = Polypropylene Monofilament

1= 7.06 16.5” SS = Stainless Steel RingRC = Rev. Collar

(S & SS only)

PEMU = Polyester Multifilament 2= 7.06 32.0” V = High-temp Plastic Snap Seal EB = Edge Binding

NMU = Nylon Multifilament 3= 4.12 8.0”C = Commercial Type Snap

Steel BandDS = Draw-String

4= 4.12 14.0” PP = Polypropylene (rolled) A = Automotive Seam

7= 5.5 15.0”

8= 5.5 20.0”

9= 5.5 31.0”

C1= 7.31 16.5”

C2= 7.31 32.5”

12= 8.0 30.0”

Mesh Materials Rating (µ)

1 5 10 25 50 75 100 125 150 175 200 250 300 400 600 800 1000 1500

NMO • • • • • • • • • • • • • • • • •

POMO • • • • • • • •

PEMU/NMU • • • • • • • • • •

Rev. 14.0





Vessel Data Sheet



36

Multi - Cartridge Liquid VesselsGTCH Series

GTCH Series Multi-Round Cartridge Vessels are designed for industrial and high purity applications. Vessels are constructed of 304 or 316 stainless steel and accept DOE, 222/FLAT and 222/FIN end cartridges in 10, 20, 30 & 40 inch lengths.

Features

• 304 & 316 stainless steel construction

• 150 PSI pressure rating standard

• Single o-ring design (Buna-N standard)

• Easy-access eye-nuts/swing-bolt closure

• Universal seat cups and alternate

compression/hold-down plates allow

vessels to accept DOE, 222/FLAT or 222/

FIN cartridges

• Heavy-duty welded angle mounting/

support legs

• Bearing-assisted hand-wheel closure davit

(GTCH12 & larger)

Options

• ASME Code Stamp

• Electropolish

• Sanitary Porting

• Alternate Seal Materials

(EPDM, Viton, Silicone)

VentCompression/Hold Down Plate

Cartridge

V-Post

Dirty Drain

CleanDrain

GaugePortsContaminated

Fluid(Inlet) Clean

Fluid(Outlet)


GTCH # of Cartridges Length Inlet/Outlet

SizeInlet/Outlet

Style Outlet Material Pressure Rating Surface Finish ASME Code Stamp

3 1 = 10” 1 = 1” N = FNPT 1 = Bottom Outlet 4 = 304 SS 15 = 150 PSI @ 250°F GB = Glass Bead Blank = None

5 2 = 20” 1.5 = 1.5” F = RF Flange 2 = Opposite Outlet 6 = 316 SS EP = Electropolish U = ASME

7 3 = 30” 2 = 2” T = TC ferrule

12 4 = 40” 3 = 3”

21 4 = 4”

36 6 = 6”

51 8 = 8”

Rev. 14.0


Vessel Data Sheet



35

Single - Cartridge Liquid VesselsGFHD Series

4 - 1/4” ODHead

Ring Nut

Dual Seals

Sump

Cartridge

Pedestal & Spring

Drain Port Plug

GFHD Series Single-Cartridge Vessels are suited for a wide variety of filtration applications. A ring-nut closure provides easy access for change-out. Rated for 300 PSI service, models are available in either 304 or 316 stainless steel construction.

Alternate Seal Materials (Sold Separately)

• Viton®

• Buna-N

Features• DOE design features a spring-loaded bottom seat cup which allows for easy installation and positive seal

• Ring-nut allows for easy change-out (wrench pin is included as standard, spanner wrench is optional)

• 3/4” and 1“ inlet and outlet available in NPT and BSPP for ease of installation

• 1/4” dirty drain port allows for complete evacuation prior to change-out

• Available in 5”, 10“, 20”, 30“ lengths to accept cartridges up to 3” OD

• 304 or 316 stainless steel construction (passivated finish)

• Offered in DOE, 222/FLAT or 226/FLAT configurations

• Heavy-duty cast head with mounting bracket

• Dual closure seal (EPDM standard)

• 300 PSI pressure rating

• Inline design


GFHD1 Length Inlet/Outlet Size End Configuration Material Pressure Rating

05 = 5” 75N = 3/4” FNPT D = DOE 4 = 304 SS 30 = 300 PSI

1 = 10” 1N = 1” FNPT 2 = 222/FLAT * 6 = 316 SS

2 = 20” 75B = 3/4” BSPP** 6 = 226/FLAT*

3 = 30” 1B = 1” BSPP**

* Available in 316 SS only ** Available in 304 SS only

Rev. 14.0





Validated Filtration Solutions To Industry Leaders®Validated Filtration Solutions to Industry Leaders®

Vessel Data Sheet



38

Single - Bag Liquid VesselsGBFV Series

GBFV Series Bag Vessels are designed to meet and/or exceed nearly all application requirements. The V-ring design provides a positive snap-fit to ensure against by-pass and deliver clean effluent.

Features• NPT or RF Flanged inlet/outlet connections • Stainless steel perforated support baskets (9/64” perf. standard)• Adjustable tripod mounting/support leg assemblies• Easy-access eye-nut/swing-bolt closures with handle• 304 & 316 stainless steel construction• Uni-style (side & bottom outlet) offers increased piping flexibility• Single o-ring seal (Buna standard)• 150 PSI pressure rating standard• Snap-fit V-ring bag seal design

Options• ASME Code Stamp • Electropolish• Sanitary porting• Mesh-lined baskets• Alternate seal materials (EPDM, Viton, Silicone)

Flow Rate* Max flow rate is the maximum flow rate recommended through the vessel without a filter bag installed (using water). Any increase in viscosity and/or the installation of filter bags will reduce these flow rates significantly. Please refer to the sizing chart or consult with Global Filter when sizing these vessels.

VentPort

Easy AccessEye-Nuts/

Swing Bolts

Stainless SteelPerforated

Support Basket

CleanDrain

ContaminatedFluid(Inlet)

CleanFluid

(Outlet)

Gauge Port

CleanFluid

(Alternate Outlet)

AdjustableMounting/Support

Leg Assembly

Model Bag Size Basket Depth EFA (ft2) Max Flow Rate (GPM)*

GBFV815 1 15 2.0 90

GBFV830 2 30 4.4 200


GBFV8 Basket Depth

Inlet/Outlet Size

Inlet/OutletStyle Outlet Material Pressure Rating Surface Finish ASME

Code Stamp

15 = #1 Size 2 = 2” N = FNPT 1 = Bottom Outlet 4 = 304 SS 15 = 150 PSI @ 250°F GB = Glass Bead Blank = None

30 = #2 Size 3 = 3” F = RF Flange2 = Opposite Side Outlet

6 = 316 SS EP = Electropolish U = ASME

T = TC Ferrule3 = Bottom &

Opposite Outlet(2” FNPT ONLY)

Rev. 14.0


Vessel Data Sheet



37

Multi - Cartridge Band - Clamp Liquid VesselsGTCHB Series

GTCHB Series Multi-Cartridge Vessels are designed for industrial and commercial applications. Vessels are constructed of 304 or 316 stainless steel and accept DOE, 222/FLAT and 222/FIN end cartridges in 10, 20, 30 & 40 inch lengths.

Options

• Sanitary Porting

• Alternate Seal Materials

Features

• Easy-access heavy-duty band-clamp closure

• Heavy-duty welded mounting/support legs

• Single o-ring design (Buna-N standard)

• Universal seal cups and compression plates

allow vessels to accept DOE,

222/FLAT or 222/FIN cartridges

• Poly-coat finish (exterior only)

• 316 stainless steel cap/spring

assemblies and v-posts

150 PSI pressure rating

VentHeavy-DutyBand-Clamp

FINCartridge

V-Post

Gauge Port

CleanDrain

ContaminatedFluid

(Inlet)

CleanFluid

(Outlet)

Gauge/Dirty Drain Port

DOECartridge


GTCHB # of Cartridges Length Inlet/Outlet

SizeInlet/Outlet

Style Outlet Material Pressure Rating Surface Finish

4 1 = 10” 2 = 2” M = MNPT 2 = Opposite Outlet 4 = 304 SS 15 = 150 PSI @ 250°F PC = Poly-coat

5 2 = 20” 3 = 3” F = RF Flange 6 = 316 SS

7 3 = 30” 4 = 4”

12 4 = 40”

22

Rev. 14.0






Vessel Data Sheet



1

Twin - Capacity Bag Liquid VesselsGBFV82 Series

Features• 304 & 316 stainless steel construction

• 150 PSI pressure rating standard

• Snap-fit V-ring bag seal design

• Single o-ring seal (Buna standard)

• Two identical GBFV830 vessels working in tandem

• Adjustable tripod mounting/support leg assemblies

• High flow rates and loading capacity at low pressure drops

• Stainless steel perforated support baskets (9/64” perf. standard)

• Two easy-access eye-nut/swing-bolt closures with single handle

• RF Flanged inlet/outlet connections (same side and opposite side

options available)

Options• ASME Code Stamp • Electropolish• Mesh-lined Baskets• Alternate Seal Materials (EPDM, Viton, Silicone)

* Max flow rate is the maximum flow rate recommended through the vessel without a filter bag installed (using water). Any increase in viscosity and/or the installation of filter bags will reduce these flow rates significantly. Please refer to the sizing chart or consult with Global Filter when sizing these vessels.

Flow Rate

GBFV82 Series Twin-Capacity Bag Vessels are designed to meet and/or exceed nearly all application requirements. The V-ring design provides a positive snap-fit to ensure against by-pass and deliver clean effluent. Vessels of-fer the flow and loading capacity of a multi-bag vessel at a more economical cost.

Rev. 14.1


GBFV8230 2 30 8.8 400


GBFV82 Basket Depth

Inlet/Outlet Size Inlet/Outlet Outlet Material Pressure Rating Surface Finish ASME

Code Stamp

30 = #2 Size 3 = 3” F = RF Flange2 = Opposite Side Outlet

4 = 304 SS 15 = 150 PSI @ 250°F GB = Glass Bead Polish Blank = None

4 = 4”5 = Same Side

Outlet6 = 316 SS EP = Electropolish U = ASME


Vessel Data Sheet



1

Single - Bag Liquid VesselsGBFE4 Series

GBFE4 Series Bag Vessels offer an economical solution to your low-flow

bag filtration requirements. These vessels offer a cost-effective means of

removing solid contaminants from a process liquid stream. Vessels are

designed to a 300 PSIG rating with a swing bolt closure. Vessels accept (1)

# 4 - size filter bag.

Features

• 304 stainless steel construction with a glass bead finish

• 300 PSIG rating

• Buna-N seal

• Easy-access swing-bolt closure

• 1” NPT uni-style (side & bottom outlet) offers increased piping flexibility

• Stainless steel hold-down spring

• 1/4” NPT vent & gauge ports

• Adjustable stainless steel tripod mounting/support leg assembly

• Stainless steel perforated support basket (9/64” perf. Standard)

Options

• Alternate Seal Materials (EPDM, Viton, Silicone)


Flow Rate

Rev. 14.1


GBFE412 4 12 1.0 50


GBFE4 Basket Depth Inlet/Outlet Size Outlet Configuration Material Pressure Rating Surface Finish

12 = #4 Size 1N = 1” FNPT3 = Bottom &

Opposite Side Outlet4 = 304 SS 30 = 300 PSI @ 250°F GB = Glass Bead Polish



Validated Filtration Solutions To Industry Leaders® Validated Filtration Solutions to Industry Leaders®

Vessel Data Sheet



42

Carbon Steel Single & Multi - Bag Liquid VesselsGBFV & GMBE Series

GBFV & GMBE Series Carbon Steel Bag Vessels are designed to offer a high-quality and economical solution to applications that do not require stainless steel construction. The V-ring tubesheet design provides a positive snap-fit to ensure against by-pass.

Features (GBFV)• Carbon steel construction with epoxy-coated exterior

• 150 PSI pressure rating

• 2” NPT uni-style (side & bottom outlet) offers increased piping flexibility


• Stainless steel perforated support baskets (9/64” perf. standard)

• Adjustable tripod mounting/support leg assemblies

• Easy-access eye-nut/swing-bolt closures with handle

• Single o-ring seal (Buna-N standard)

Features (GMBE)• Carbon steel construction with epoxy-coated exterior 150 PSI pressure rating• RF Flanged “inline” inlet/outlet connections • Snap-fit V-ring bag seal design• Stainless steel perforated support baskets (9/64” perf. standard)• Permanent compression/hold-down plate• Heavy-duty welded angle mounting/support legs• Easy-access eye-nut/swing-bolt closure with bearing-assisted hand-wheel davit • Single o-ring seal (Buna-N standard)


Flow Rate

Model # of Bags

Bag Size

Basket Depth EFA (ft2) Max Flow Rate (GPM)*

GBFV815 1 1 15” 2.0 90

GBFV830 1 2 30” 4.4 200

GMBE430 4 2 30” 17.6 600

GMBE630 6 2 30” 26.4 1200


GBFV8 Basket Depth Inlet/Outlet Size Inlet/Outlet Material Pressure Rating Surface Finish

15 = 15” 2N = 2” FNPT 3 = Uni-Style C = Carbon Steel 15 = 150 PSI @ 300°F EC = Epoxy Coated (Ext)

30 = 30”

GMBE # of Bags/Baskets

Basket Depth Inlet/Outlet Size Inlet/Outlet Material Pressure Rating Surface Finish

4 30 = 30” 4F = 4” RF Flange Blank = Inline C = Carbon Steel 15 = 150 PSI @ 300°F EC = Epoxy Coated (Ext)

6 6F = 6” RF Flange

Rev. 14.0Global Filter LLC • 7201 Mt. Vernon Rd. SE • Cedar Rapids, IA 52403



Vessel Data Sheet



1

Multi - Bag Liquid VesselsGMBV Series

GMBV Series Multi-Bag Vessels are designed for high flow and/or high contaminant load applications where clean effluent is critical. The V-ring design provides a positive snap-fit to ensure against by-pass.

Features• Heavy-duty welded angle mounting/ support legs

• RF Flanged “inline” inlet/outlet connections

• Bearing assisted hand-wheel closure davit

• Permanent compression/hold-down plate• Stainless steel perforated support baskets (9/64” perf. standard)

• Easy-access eye-nut/swing-bolt closures

• 304 & 316 stainless steel construction


• 150 PSI pressure rating• Single o-ring seal (Buna-N standard)

Options• ASME Code Stamp • Mesh-lined Baskets• Alternate Seal Materials (EPDM, Viton, Silicone)


Flow Rate

Rev. 14.1

Gauge Port

Gauge Port

CleanDrain

Stainless SteelPerforated

Support Basket

V-RingEasy-access

Eye-nuts/Swing-bolts

Vent Port

Bearing AssistedHand Wheel Davit


GMBV # of Bags/Baskets

Basket Depth Inlet/Outlet Size Inlet/Outlet Material Pressure Rating Surface Finish ASME

Code Stamp

4 30 = 30” 4 = 4” F = RF Flange 4 = 304 SS 15 = 150 PSI @ 250°F GB = Glass Bead Blank = None

6 6 = 6” 6 = 316 SS U = ASME

8 8 = 8”

12

Model # of Bags

Bag Size

Basket Depth EFA (ft2) Max Flow Rate (GPM)*

GMBV430 4 2 30” 17.6 600

GMBV630 6 2 30” 26.4 1200

GMBV830 8 2 30” 35.2 1600

GMBV1230 12 2 30” 57.8 2400

Todd Younggreen President and CEO

[email protected]

Terry YounggreenVice President of Operations

[email protected]

Brian McSherryVice President of Sales and Marketing

[email protected]

Ed GiordanoVice President of Engineering and Quality

[email protected]

Jennifer HambrickDirector of Sales, Midwest USA

[email protected]

Mike SojkaRegional Sales Manager, OEM Accounts

[email protected]

Ned HurdDirector of Sales, Northwest USA

[email protected]

Tim CacchioneRegional Sales Manager, South Texas

[email protected]

Alicia HalphenRegional Sales Manager, Louisiana

[email protected]

Robbie FurlerRegional Sales Manager, Southeast USA

[email protected]

Abdelhak BouthirEuropean Sales Manager

[email protected]

KC LeeAPAC Sales [email protected]

Tom CislerCustomer Service Manager

[email protected]

Kirk GrimesProduct and Technical Support

[email protected]

www.GlobalFilter.com7201 Mt. Vernon Rd. SE | Cedar Rapids, Iowa 52403

Toll Free: 877-603-1003 | Ph: 319-743-0110 | Fx: 319-743-0220

GlobalFilter.com Issue 2015 · Absolute Grade Polypropylene Meltblown Cartridges – GATB ..... 41...

Documents

Transcript of GlobalFilter.com Issue 2015 · Absolute Grade Polypropylene Meltblown Cartridges – GATB ..... 41...