ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale •...
Transcript of ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale •...
![Page 1: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/1.jpg)
ISS – 4.5” 1:40 scale
• Building this model requires a moderate level of modeling skill and an intimate familiarity with the International Space Stationstructure – see http://www.nasa.gov/mission_pages/station/main/index.html
• Model is approximately 1:40 scale; sized to use 2 liter soda bottles to shape the modules. The finished model will be 6 feet high across the main solar arrays, just over 8 feet wide across the main truss, and about five feet long along the main spine where the modules mount.
• Most sections consist of a cylinder using a bottle as a form and two end caps. More complex shapes are formed from cones and boxes. Sections are assembled with 1 ¼ inch PVC tubing running though the part and connectors where needed. Most conics are formed by cutting on the solid radial lines, then forming and overlapping to the dotted line.
– Non-structural connections are made with either a paper tube rolled to the same outside diameter as the tubing (1.68 inch/43mm) or with slip-fit cylinders. These connections include the cupola, airlock, JEM small experiment module, the PIRS docking compartment and Soyuz spacecraft.
– To make a slip-fit docking connection, first close the open ends of the modules to be joined with a circular piece of card. Using a mandrel (cylindrical form), roll and glue a cylinder at least 1 inch long from card stock. When dry, roll a second cylinder over the first, wrapping tightly. When gluing the second cylinder, make sure you don’t glue it to the first (inner) piece. Cut a ½ inch (1 cm) section from both cylinders and glue one piece to each of the parts to be joined. When dry, the two cylinders should slip over each other for a friction fit. Secure with glue for a permanent display.
• The truss is assembled from hexagonal and rectangular box sections. Each section is capped and that end cap has a hole to allow the 1 ¼ inch PVC support tubing to pass through. The tubing runs off-center to accommodate the shape of the S1 and P1 truss sections.
• The main solar arrays are made from plain paper segments (to save weight) supported by a 3/16 inch dowel glued up the center of each array. The arrays are mounted to the truss using a 7/32 inch brass tube secured in a hole drilled through the main truss PVC support tube. The solar array dowels then slip into the tubing.
• The radiators for the solar arrays are suspended from a dowel attached to the main truss and attached to the outer end of the radiator.
• The main thermal radiators are suspended from a stiff wire that runs up the center of the mount, then bends 90 degrees and extends out to connect with the end of the top radiator panel. All three panels are tied together at the outer end with a strip of card to hold them up.
• The finished model should be suspended from (or supported at) at least four points: both ends of the truss, the center of the truss, and the back end (Progress/Zvezda) of the central spine.
Copyright 2009 – John Jogerst. Not for commercial use. For personal or educational use only.
![Page 2: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/2.jpg)
STRUCTURAL SUPPORTCEILING HANGER DISPLAY
TRUSS SUPPORT
1 ¼ INCH PVC
ZVEDZA ZARYA
NODE
Z1 TRUSSMAIN TRUSS
DESTINY
JEMMCOLUMBUS
SOLARARRAYSUPPORT3/16 dowel
Z1 TRUSS
ZVEDZA ZARYA
NODEDESTINY
JEMM
JEMM PALLET
COLUMBUS
NODE
1 ¼ INCH PVC
EYEBOLT
EYEBOLT
EYEBOLT
EYEBOLT
EYEBOLT
RADIATOR RADIATOR SUPPORTWIRE BENT INTO BASE.
ADDITIONAL NODE LATER
SOYUZATVETC.
PROGRESS
ADDITIONAL STRUCTURE (NODE, LS MODULES, CREW VEHICLES) ATTACHED WITHGLUED PAPER TUBING: NON-STRUCTURAL
EYEBOLT
SOLARARRAYSUPPORT7/32 4” brasstubing
Drill 7/32 hole through main tubeand epoxy brass tube in place.
Slip fit dowel into brass tube.
5 feet
8 feet
6 feet
Vertical connection must be glued
36 inches
54-60 inches
11.25 inches
13.5 inches
6.5 inches
36 inches
![Page 3: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/3.jpg)
![Page 4: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/4.jpg)
Modules
CYLINDER
END CAP END CAP
PVC SUPPORT TUBE
![Page 5: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/5.jpg)
NODE
![Page 6: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/6.jpg)
NODE
END CAPS
HATCHES
R. Fortezza -1999
![Page 7: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/7.jpg)
R. Fortezza -1999
![Page 8: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/8.jpg)
NODE – docking adapterR. Fortezza -1999
![Page 9: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/9.jpg)
NODE – cupola
NODE - AIRLOCK
SIDE BANDS
FOR CYLINDER
END BARREL
LARGE CAPS
R. Fortezza -1999
![Page 10: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/10.jpg)
NODE – airlock
LARGE CAPS
END BARREL
![Page 11: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/11.jpg)
NODE – airlock
GAS CANNISTERS (4)
SIDE BAND
![Page 12: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/12.jpg)
PIRS DOCKING COMPARTMENT
![Page 13: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/13.jpg)
FGB/UDMZarya (use radiator array)
Research Module(RM has two solar arraysset at 90 degree angle, noradiator, only aft set of narrowequipment boxes)
AFT TRANSITION CONES
BODY CYLINDER
CONIC FORMER
CONNECTOR/DOCK
SERVICE MODULEZvezdaMultipurpose Lab Module
AFT CYLINDER FWD CYLINDER CONNECTOR/DOCK
Cut out circular opening to attachdocked spacecraft or modules. Use slip-fit cylinders to form attachments.
AFTCAP
SEE NASA WEB SITE FOR DETAILS ON POSITIONING OF EQUIPMENT BOXES, RADIATOR, AND SOLAR PANELS.
MID-BODY TRANSITION
WIDE EQUIPMENTCABINETS
NARROW EQUIPMENTCABINETS
Detailed airlock if used. Use on second set ofmodules mounted below station, not on mainspine. If used on spine modules, enlarge endcap hole to fit armature.
![Page 14: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/14.jpg)
FGB/UDM
END CONE
AFT TRANSITION CONES
![Page 15: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/15.jpg)
FGB/UDM BODY CYLINDER
![Page 16: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/16.jpg)
FGB/UDM CONNECTOR/DOCK
![Page 17: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/17.jpg)
FGB/UDM
CONIC FORMERCUT OUT CENTER FOR ARMATURE
FOLD TABS IN ALTERNATE DIRECTIONSTO CONNECT TO CONES (2) FORE AND
AFT OF THE FORMER.
RADIATOR PANELS NEXT PAGETwo panels, cut long center line, foldon short verticals, pierce dots for support wire.
RUN U-SHAPED COAT HANGER WIRE FORSUPPORT. BEND UP INNER ENDS TO HOLDALIGNMENT.
TOP VIEW
SIDE VIEW
![Page 18: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/18.jpg)
FGB/UDM
![Page 19: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/19.jpg)
RESEARCH MODULE VARIANT – SOLAR ARRAYS
![Page 20: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/20.jpg)
RESEARCH MODULE VARIANT – SOLAR ARRAYS
![Page 21: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/21.jpg)
EQUIPMENT CABINETSFGB/UDM
![Page 22: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/22.jpg)
EQUIPMENT CABINETSFGB/UDM
![Page 23: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/23.jpg)
FGB/UDMEQUIPMENT CABINETS
![Page 24: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/24.jpg)
DETAILED AIRLOCK SECTIONFOR FGB/UDM OR SM
![Page 25: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/25.jpg)
DETAILED AIRLOCK SECTIONFOR FGB/UDM OR SM
BODY CYLINDEREND CAP
ROLL SLIP CYLINDERS (see page 1) – CUT APART ALONG LINES AFTER ROLLING
![Page 26: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/26.jpg)
SERVICE MODULE
INNER SOLAR PANEL
INSERT COATHANGER WIREFOR SUPPORT.RUN FULL LENGTHOF INNER AND OUTER PANELS.
FOLD AND GLUE.INSERT TABSBETWEEN LAYERSOF OUTER PANELS.
PRINT ON PLAIN PAPER
![Page 27: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/27.jpg)
SERVICE MODULE
INNER SOLAR PANEL
PRINT ON PLAIN PAPER
![Page 28: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/28.jpg)
SERVICE MODULE
OUTER SOLAR PANEL
PRINT ON PLAIN PAPER
![Page 29: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/29.jpg)
SERVICE MODULE
OUTER SOLAR PANEL
PRINT ON PLAIN PAPER
![Page 30: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/30.jpg)
SERVICE MODULEAFT CYLINDER
![Page 31: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/31.jpg)
SERVICE MODULE
AFT
MID-BODYTRANSITION
![Page 32: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/32.jpg)
SERVICE MODULE FORWARD CYLINDER
![Page 33: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/33.jpg)
SERVICE MODULECONNECTOR/DOCK
![Page 34: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/34.jpg)
DESTINY LAB
![Page 35: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/35.jpg)
DESTINY LAB
Destiny
![Page 36: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/36.jpg)
DESTINY LABEND CAPS
![Page 37: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/37.jpg)
COLUMBUS LAB Columbus lab is alsologistics module, typicallydismounted after loading/unloading and lands with Shuttle.
![Page 38: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/38.jpg)
COLUMBUS LAB
Columbus
![Page 39: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/39.jpg)
COLUMBUS LAB
END CAPS
![Page 40: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/40.jpg)
JEM LAB
![Page 41: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/41.jpg)
JEM LAB
![Page 42: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/42.jpg)
JEM LAB
END CAPS
![Page 43: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/43.jpg)
JEM EXPOSURE FACILITY
PALLET
![Page 44: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/44.jpg)
JEM EXPOSUREFACILITY
PALLET
EQUIPMENTBOXES
![Page 45: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/45.jpg)
JEM EXPOSUREFACILITY
EQUIPMENTBOXES
![Page 46: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/46.jpg)
JEM ELM
![Page 47: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/47.jpg)
JEM ELM
END CAPS
![Page 48: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/48.jpg)
LIFE SUPPORT MODULE (future)
END CONES
BODY CYLINDER
![Page 49: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/49.jpg)
RESEARCH MODULEDOCKING/STORAGEMODULE (future)
END CONES
OPTIONAL FLAT END CAP
END CAP FOR CONICIF NEEDED – COVER WITH HATCH IF EXPOSED
![Page 50: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/50.jpg)
BODY CYLINDERRESEARCH MODULE, DOCKING/STORAGE MODULE (future)
![Page 51: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/51.jpg)
MOBILE TRANSPORTER/BASE
TO TRUSS
BOX BOX BOTTOM
![Page 52: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/52.jpg)
MOBILE TRANSPORTER/BASE
ROBOT (CANADARM) ARM END FITTINGS
BOX – MOUNT ON BOX BOTTOM
MOUNTING PLATFORM – GLUE TO BOX, THEN ATTACH TO TRUSS
Flexible straws sleeved together – sections about7 inches long. Cover with white tape or paint.
![Page 53: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/53.jpg)
CANADARM DEXTRE
3 JOINTS – 1” ARM SECTIONS
ROLL
![Page 54: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/54.jpg)
Z1 TRUSS - enlarged
BOTTOMTRUSS SIDE
![Page 55: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/55.jpg)
Z1 TRUSS -enlarged
TOP
TO TR
USS
BACK – AWAY FROM TRUSS
![Page 56: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/56.jpg)
Z1 TRUSSenlarged
SIDES
![Page 57: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/57.jpg)
S0 TRUSSZ1 TRUSSenlarged
![Page 58: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/58.jpg)
TRUSS ALIGNMENTS0 S1 S 3-4 inner
S 3-4 i S 3-4 outer/S 5-6
![Page 59: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/59.jpg)
S0 TRUSSJEMM SIDE
![Page 60: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/60.jpg)
S0 TRUSSJEMM SIDE
![Page 61: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/61.jpg)
S0 TRUSSTO
PTO
P
![Page 62: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/62.jpg)
S0 TRUSSTO
PTO
P
![Page 63: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/63.jpg)
S1/P1 TRUSSINNER
![Page 64: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/64.jpg)
S1/P1 TRUSSINNER
![Page 65: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/65.jpg)
S1/P1 TRUSSINNER
BACK
TOP
![Page 66: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/66.jpg)
S1/P1 TRUSSINNER
BACK
TOP
![Page 67: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/67.jpg)
S1/P1 TRUSSOUTER
![Page 68: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/68.jpg)
S1/P1 TRUSSOUTER
![Page 69: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/69.jpg)
S1/P1 TRUSSOUTER
BACK
TOP
![Page 70: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/70.jpg)
S1/P1 TRUSSOUTER
BACK
TOP
![Page 71: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/71.jpg)
S/P 3-4 TRUSSINNER
TOP
![Page 72: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/72.jpg)
S/P 3-4 TRUSSINNER
TOP
![Page 73: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/73.jpg)
S/P 3-4 TRUSSINNER
TOP
TOP
![Page 74: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/74.jpg)
S/P 3-4 TRUSSINNER
TOP
![Page 75: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/75.jpg)
S/P 3-4 TRUSSOUTER
OUTBOARD
![Page 76: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/76.jpg)
S/P 3-4 TRUSSOUTER
OUTBOARD
![Page 77: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/77.jpg)
S/P 3-4 TRUSSOUTER
OUTBOARD
![Page 78: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/78.jpg)
S/P 3-4 TRUSSOUTER
OUTBOARD
![Page 79: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/79.jpg)
S/P 3-4 TRUSSOUTER
![Page 80: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/80.jpg)
S/P 5-6 TRUSSINNER
OUTBOARD
![Page 81: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/81.jpg)
S/P 5-6 TRUSSINNER
OUTBOARD
![Page 82: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/82.jpg)
S/P 5-6 TRUSSINNER
OUTBOARD
![Page 83: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/83.jpg)
S/P 5-6 TRUSSINNER
OUTBOARD
![Page 84: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/84.jpg)
S/P 5-6 TRUSSOUTER
OUTBOARD
![Page 85: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/85.jpg)
S/P 5-6 TRUSSOUTER
OUTBOARD
![Page 86: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/86.jpg)
S/P 5-6 TRUSSOUTER
OUTBOARD
![Page 87: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/87.jpg)
S/P 5-6 TRUSSOUTER
OUTBOARD
![Page 88: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/88.jpg)
S/P 5-6 TRUSSEND CAPS
OUTER CAPS
![Page 89: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/89.jpg)
S/P 5-6 TRUSSEND CAPS
OUTER CAPS
![Page 90: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/90.jpg)
MAIN SOLAR PANELS – PHOTO-VOLTAIC ARRAY (PVA) “GOLD” SIDE VIEW
Glue reinforcing beams at ends to gold side;cut hole to run mounting rod through bottom beam;butt-glue rod to top beam to support array
Glue up reinforcing beams from card stock rectangle sized to matchwidth of solar array. Beam profile – about ½” wide.
Mounting rod – 36” plus lengthto insert into truss.
![Page 91: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/91.jpg)
SOLAR PANEL – FRONT; ONE OF SIX PER ARRAY;EIGHT ARRAYS TOTAL. (48 PAGES)
PRINT ON PLAIN PAPER –back to back with next page, use“gold side” to guide cutting.
![Page 92: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/92.jpg)
SOLAR PANEL – BACK; ONE OF SIX PER ARRAY(48 PAGES)
PRINT ON PLAIN PAPER – cutout panel from this side.
Use overlap on bottom edge to connect to next segment
![Page 93: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/93.jpg)
SOLAR PANEL – FRONT; ONE OF SIX PER ARRAY;EIGHT ARRAYS TOTAL. (48 PAGES)
PRINT ON PLAIN PAPER –back to back with next page, use“gold side” to guide cutting.
ALTERNATE – PRINT ON BLUE PAPER; GLUE NEXT PAGE ON BACK
![Page 94: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/94.jpg)
SOLAR PANEL – BACK; ONE OF SIX PER ARRAY(48 PAGES)
PRINT ON PLAIN PAPER – cutout panel from this side.
Use overlap on bottom edge to connect to next segmentALTERNATE – PRINT ON YELLOW/GOLD PAPER
![Page 95: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/95.jpg)
SOLAR PANEL – RADIATOR. ONE OF FOUR; ONE PER ARRAY AXLE.TRUSS 4&6.
OVERLAPTO
CONNECT
ATTA
CH
TO B
AC
K S
IDE O
F TRU
SS
TRUSS
TUBE
ADD TO SUPPORTAND CONNECT
![Page 96: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/96.jpg)
THERMAL RADIATOR. EIGHT SECTIONS PER STRING; THREE STRINGSPER TRUSS; MOUNT ON TRUSS 1. (print page 12 times total)
CONNECTOR CONNECTOR
PRINT ON PLAIN PAPER
![Page 97: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/97.jpg)
THERMAL RADIATOR – HALF MOUNT. FOUR PARTS TOTAL TO MAKETWO MOUNTINGS. TRUSS 1 MOUNT.
This part will need a support – use stiff wire to hang radiators.Base of each radiator set attaches to mount. Mount attaches to truss (see NASA website for detail).
MO
UN
T
STIFF WIRE
ADD STRIP AT ENDTO CONNECT ALL3 RADIATORS ANDWRAP END OF WIREFOR SUPPORT
TRUSS
Overlap connection to second part of mount.
![Page 98: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/98.jpg)
PROGRESS
BODY CYLINDER
AFT
AFT
AFTCONIC
BODY CYLINDER
FWD CONIC
SOYUZ
AFT CONIC
BODYCYLINDER
FWD CYLINDER
AFT
FWD CONICS
BODY CONIC
![Page 99: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/99.jpg)
PROGRESS
FWD CONIC
PR
OG
RE
SS A
RR
AY
S
SO
YU
Z A
RR
AY
![Page 100: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/100.jpg)
PROGRESS
SOYUZ
AFT CONICS FORPROGRESS ANDSOYUZ (1 EACH)
AFT SOYUZ
![Page 101: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/101.jpg)
SOYUZ
BODY CONIC (USE 1)
FWD CYLINDER
![Page 102: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/102.jpg)
SOYUZBODY CYLINDER
FWD CONICS (2)
![Page 103: ISS – 4.5” 1:40 scalepapermodelingman.com/iss_jj/Big_ISS.pdf · ISS – 4.5” 1:40 scale • Building this model requires a moderate level of modeling skill and an intimate familiarity](https://reader034.fdocuments.in/reader034/viewer/2022050123/5f52ffdb6fd02b4d83234164/html5/thumbnails/103.jpg)
PARTS