isovac 310-50 A€¦ · GOST 21427.2 ASTM A677 AISI IS648 GB/T2521.1 Material No. Abbreviation...
7
isovac 310-50 A Manufactured in the most modern production lines, this fully processed isovac ® grade exhibits highly homogeneous properties across the width and length of the entire strip. The result is excellent and consistent processability in the manufacture of highly efficient electrical components. Upon request, isovac 310-50 A can be supplied with an electrical steel insulation system and can be used directly in as-delivered condition. Convincing advantages: » Best processability through consistent mechan- ical properties and homogeneous, clean sur- faces » Excellent stackability resulting from high dimen- sional accuracy in rolling direction and perpen- dicular to rolling direction (thickness tolerance) » Innovative electrical steel insulation systems upon request The perfect solution for direct application Electrical Steel | Fully processed Data sheet isovac 310-50 A | page 1/7 | 01/2018 voestalpine Steel Division www.voestalpine.com/isovac
Transcript of isovac 310-50 A€¦ · GOST 21427.2 ASTM A677 AISI IS648 GB/T2521.1 Material No. Abbreviation...
Data sheet isovac 310-50 A | page 1/7 | 01/2018
isovac 310-50 A
Manufactured in the most modern production lines, this fully processed isovac® grade exhibits highly homogeneous properties across the width and length of the entire strip. The result is excellent and consistent processability in the manufacture of highly efficient electrical components.Upon request, isovac 310-50 A can be supplied with an electrical steel insulation system and can be used directly in as-delivered condition.
Convincing advantages: » Best processability through consistent mechan-ical properties and homogeneous, clean sur-faces
» Excellent stackability resulting from high dimen-sional accuracy in rolling direction and perpen-dicular to rolling direction (thickness tolerance)
» Innovative electrical steel insulation systems upon request
The perfect solution for direct application
Electrical Steel | Fully processed Data sheet isovac 310-50 A | page 1/7 | 01/2018
voestalpine Steel Division www.voestalpine.com/isovac
Data sheet isovac 310-50 A | page 2/7 | 01/2018
Grade namedaccording to isovac®
DIN EN 10106 IEC60404-8-4
JISC2552
GOST21427.2
ASTMA677
AISI IS648 GB/T2521.1Material No. Abbreviation
isovac 310-50 A 1.0808 M310-50A M310-50A 5 50A310 2412 47F180 M-22 50C310 50W310
Grade named according to conventional international standards:
Grade named according to isovac®
Yield strength ReH
[MPa]
0.2 %-Yield strength Rp0.2
[MPa]
Tensile strength Rm
[MPa]
ElongationA80 [%]
HardnessHV5
[-]
isovac 310-50 A 360 355 490 26 185
Mechanical properties: Tensile test according to DIN EN ISO 6892-1 and hardness according to DIN EN ISO 6507-1 (Typical values); Test direction: Transverse
Specific total loss Magnetic polarization Relative permeability
Grade namedaccording to isovac®
1.0 T P10
1.5 TP15
2500 A/mJ25
5000 A/mJ50
10000 A/mJ100
1.5 Tµr
50 Hz[W/kg]
60 Hz[W/lb]
50 Hz[W/kg]
60 Hz[W/lb] [T] [T] [T] [-]
isovac 310-50 A 1.10 0.63 2.70 1.54 1.57 1.66 1.78 1200
Magnetic properties: in as-delivered condition (Typical values)Test direction: Mean value from longitudinal and transverse measurements at 50 Hz (60 Hz), single-sheet test
Grade named according to isovac®
Densityρ
[g/cm3]
Specific electrical resistanceρs
[µΩcm]
Thermal conductivityλ
[W/mK]
isovac 310-50 A 7.68 52.0 25
Physical properties: Typical values
voestalpine supplies isovac 310-50 A, an electrical steel of the highest quality. We offer you a customer-focused overall package of products, service and logistics in addition to all the advantages of our integrated metallurgical facility and Steel Service Centers.
Data sheet isovac 310-50 A | page 3/7 | 01/2018
Characteristics Ps/J loss curve and characteristics J/H magnetization curveTest direction: Mean value from longitudinal and transverse measurements at indicated frequencies, single-sheet test
Characteristics µr/J permeability curveTest direction: Mean value from longitudinal and transverse measurements at 50 Hz, single-sheet test
0.0
0.1
1.0
10.0
100.0
1000.0
0 500 1000 1500
P S [W
/kg]
J [mT]
50 Hz 60 Hz 200 Hz 400 Hz 500 Hz 600 Hz 700 Hz 800 Hz 1000 Hz
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
10000
0 500 1000 1500 2000
µ r
J [mT]
50 Hz
0
200
400
600
800
1000
1200
1400
1600
1800
10 100 1000 10000
J [mT]
H [A/m]
50 Hz
Data sheet isovac 310-50 A | page 4/7 | 01/2018
Frequency dependence of magnetic propertiesTest direction: Mean value longitudinal and transverse at indicated frequencies and polarizations, single-sheet test
50 Hz 60 Hz 200 Hz
J [mT]
H[A/m]
Ps[W/kg]
µr[-]
J [mT]
H[A/m]
Ps[W/kg]
µr[-]
J [mT]
H[A/m]
Ps[W/kg]
µr[-]
100 31 0.11 2805
150 33 0.05 3648 150 33 0.07 3621 150 37 0.34 3189
200 37 0.09 4256 200 38 0.11 4190 200 43 0.57 3568
250 41 0.13 4851 250 42 0.16 4747 250 49 0.82 3938
300 45 0.17 5428 300 46 0.21 5286 300 55 1.08 4294
350 49 0.21 5980 350 51 0.27 5803 350 61 1.36 4632
400 53 0.26 6501 400 55 0.32 6292 400 67 1.67 4947
450 57 0.31 6986 450 59 0.39 6746 450 72 2.01 5235
500 60 0.36 7427 500 62 0.46 7160 500 77 2.39 5490
550 64 0.42 7822 550 66 0.53 7530 550 82 2.81 5709
600 67 0.49 8171 600 69 0.62 7858 600 87 3.27 5893
650 70 0.56 8478 650 73 0.71 8148 650 92 3.77 6043
700 74 0.63 8749 700 76 0.80 8402 700 97 4.32 6160
750 77 0.71 8986 750 80 0.90 8625 750 102 4.90 6246
800 81 0.79 9194 800 83 1.01 8820 800 107 5.52 6302
850 85 0.88 9371 850 87 1.12 8987 850 113 6.18 6329
900 89 0.97 9498 900 92 1.24 9117 900 119 6.88 6331
1000 100 1.16 9501 1000 102 1.49 9214 1000 133 8.43 6272
1050 108 1.27 9324 1050 109 1.62 9142 1050 140 9.29 6213
1100 117 1.38 8980 1100 118 1.77 8900 1100 149 10.21 6109
1150 129 1.50 8439 1150 129 1.92 8420 1150 159 11.21 5946
1200 146 1.63 7716 1200 146 2.08 7725 1200 173 12.28 5760
1250 171 1.77 6829 1250 171 2.26 6850 1250 192 13.43 5556
1300 206 1.92 5767 1300 205 2.46 5792 1300 218 14.68 5150
1350 259 2.10 4535 1350 258 2.68 4559 1350 262 16.04 4375
1400 391 2.30 3239 1400 388 2.94 3258 1400 386 17.56 3299
1450 677 2.53 2024 1450 673 3.23 2036 1450 668 19.26 2096
1500 1210 2.76 1099 1500 1206 3.53 1102 1500 1207 21.03 1103
1550 2075 2.96 608 1550 2074 3.79 609 1550 2085 22.77 592
1600 3299 3.16 402 1600 3298 4.05 402 1600 3322 24.61 398
1650 4869 3.36 289 1650 4862 4.33 290 1650 4895 26.65 294
1700 6683 3.58 217 1700 6668 4.63 217 1700 6705 28.87 221
Data sheet isovac 310-50 A | page 5/7 | 01/2018
Frequency dependence of magnetic propertiesTest direction: Mean value longitudinal and transverse at indicated frequencies and polarizations, single-sheet test
400 Hz 500 Hz 600 Hz
J [mT]
H[A/m]
Ps[W/kg]
µr[-]
J [mT]
H[A/m]
Ps[W/kg]
µr[-]
J [mT]
H[A/m]
Ps[W/kg]
µr[-]
100 34 0.33 2455 100 34 0.45 2420
150 43 0.95 2730 150 43 1.30 2665 150 45 1.68 2535
200 51 1.59 3000 200 52 2.18 2905 200 54 2.80 2750
250 59 2.26 3262 250 61 3.11 3135 250 64 3.99 2956
300 67 2.98 3509 300 69 4.10 3350 300 73 5.29 3146
350 75 3.77 3738 350 78 5.19 3546 350 83 6.73 3317
400 83 4.64 3944 400 87 6.40 3718 400 93 8.33 3463
450 90 5.61 4122 450 96 7.74 3860 450 102 10.14 3580
500 98 6.69 4269 500 104 9.25 3968 500 113 12.20 3662
550 106 7.91 4379 550 113 10.95 4039 550 123 14.52 3706
600 113 9.27 4457 600 122 12.85 4075 600 134 17.14 3717
650 121 10.76 4504 650 132 14.97 4081 650 145 20.06 3699
700 129 12.39 4524 700 142 17.35 4063 700 157 23.30 3660
750 137 14.17 4522 750 152 19.99 4024 750 169 26.87 3603
800 146 16.10 4499 800 164 22.91 3969 800 183 30.80 3537
850 156 18.18 4460 850 177 26.13 3903 850 198 35.09 3464
900 166 20.43 4408 900 190 29.60 3831 900 214 39.79 3388
1000 189 25.51 4279 1000 218 37.02 3685 1000 248 50.51 3227
1050 201 28.38 4208 1050 232 41.03 3614 1050 267 56.61 3145
1100 214 31.49 4128 1100 251 46.09 3515 1100 287 63.26 3063
1150 228 34.84 4037 1150 273 52.37 3385 1150 308 70.47 2982
1200 243 38.48 3953 1200 287 56.75 3342 1200 330 78.24 2901
1250 260 42.44 3879 1250 287 58.45 3417 1250 353 86.58 2820
1300 276 46.73 3757 1300 329 69.53 3153 1300 378 95.74 2743
1350 304 51.36 3492 1350 356 80.84 2855 1350 394 105.71 2666
1400 410 56.48 2926 1400 441 83.94 2613 1400 469 116.43 2402
1450 677 62.17 1999 1450 772 91.97 1792 1450 724 128.29 1781
1500 1204 68.26 1100 1500 1223 102.21 1074 1500 1198 141.77 1114
1550 2075 74.62 605
1600 3312 81.62 400
1650 4897 89.57 288
1700 6727 98.24 216
Data sheet isovac 310-50 A | page 6/7 | 01/2018
Frequency dependence of magnetic propertiesTest direction: Mean value longitudinal and transverse at indicated frequencies and polarizations, single-sheet test
700 Hz 800 Hz 1000 Hz
J [mT]
H[A/m]
Ps[W/kg]
µr[-]
J [mT]
H[A/m]
Ps[W/kg]
µr[-]
J [mT]
H[A/m]
Ps[W/kg]
µr[-]
100 38 0.76 2177
150 48 2.13 2375
200 58 3.54 2569
250 68 5.05 2753
300 78 6.69 2923
350 89 8.52 3074
400 100 10.57 3201 400 109 12.63 3016 400 121 17.88 2699
450 111 12.89 3299 450 120 15.78 3075 450 134 22.45 2727
500 122 15.53 3364 500 131 19.14 3118 500 148 27.34 2741
550 134 18.53 3392 550 143 22.92 3130 550 163 32.84 2733
600 146 21.91 3387 600 157 27.18 3114 600 180 39.05 2703
650 159 25.71 3357 650 172 31.96 3075 650 198 46.06 2657
700 173 29.95 3306 700 188 37.31 3018 700 217 53.95 2597
750 188 34.64 3241 750 205 43.28 2948 750 239 62.80 2527
800 204 39.83 3168 800 224 49.90 2870 800 262 72.70 2453
850 221 45.53 3091 850 245 57.22 2790 850 286 83.72 2377
900 240 51.78 3013 900 266 65.28 2709 900 313 95.91 2300
1000 280 66.11 2856 1000 313 83.80 2551 1000 370 123.98 2155
1050 302 74.27 2779 1050 338 94.34 2477 1050 401 139.95 2088
1100 325 83.15 2702 1100 365 105.79 2406 1100 433 157.29 2026
1150 350 92.76 2625 1150 393 118.19 2336 1150 466 176.07 1967
1200 375 103.12 2554 1200 421 131.54 2270 1200 501 196.33 1909
1250 400 114.28 2487 1250 450 145.87 2210 1250 539 218.17 1849
1300 430 126.53 2410 1300 482 161.22 2147 1300 574 241.98 1802
1350 443 139.84 2375 1350 501 178.04 2126
1400 500 154.06 2233 1400 550 196.31 2029
1450 738 169.79 1719 1450 743 215.90 1636
1500 1209 188.61 1110 1500 1193 240.48 1108
Data sheet isovac 310-50 A | page 7/7 | 01/2018
voestalpine Stahl GmbH voestalpine-Straße 34020 Linz, AustriaT. +43/50304/[email protected]/isovac
The information and product properties contained in this printed material are non-binding and serve the sole purpose of technical orientation. They do not replace individual advisory services provided by our sales and customer service teams. The product information and characteristics set forth herein shall not be considered as guaranteed properties unless explicitly stipulated in a separate contractual agreement. For this reason, voestalpine shall not grant any warranty nor be held liable for properties and/or specifications other than those subject to explicit agreement. This also applies to the suitability and applicability of products for certain applications as well as to the further processing of materials into final products. All application risks and suitability risks shall be borne by the customer. The General Terms of Sale for Goods and Services of the voestalpine Steel Division shall apply to all materials supplied by the voestalpine Steel Division and can be accessed using the following link: www.voestalpine.com/stahl/en/The-Steel-Division/General-Terms-of-Sale
Technical changes are reserved. Errors and misprints are excepted. No part of this publication may be reprinted without explicit written permission by voestalpine Stahl GmbH.
Please find further information and downloadable files at
www.voestalpine.com/isovac
Available Dimensions
Grade namedaccording to isovac®
Delivery form Width[mm]
Length[mm]
isovac 310-50 AWide strip / Slit strip 19 – 1590 -
Cut-to-length sheets 300 – 1590 300 – 5000
Grade namedaccording to isovac®
Uncoated C-3 Backlack C-5 C-6
isovac 310-50 A
Deliverable coating systems
Available On request
