®

AMAÇLI YALITIM MALZEMESİ

Mail   : info@isonaturelle.com

Web : www.isonaturelle.com.tr

MULTIPURPOSE ISOLATION MATERIAL

Isonaturelle is a multipurpose insulating material which consists of 98 % natural component , can be applied easily and it provides

heat , fire and noise insulation.With Isonaturelle®, your buildings are protected for many years.

Isonaturelle, is multipurposed insulating material..

What is Isonaturelle ?

Against cold Against heat Against fire . Against must . Against water

Provides insulation against cold.

Provides insulation against heat

Durable against fire

Natural components

Water proofed

Provides noise insulation

Applied easily.

Adds comfort to building.

Nature friendly.

Very light

Durable against crushes

Provides provident

Product Qualities

Components are natural.isonaturelle®, is a natural part and complement of constructional component which is called wall. The

large part of the components are found as rich reserves in nature and they are natural materials

that provide heat insulation values which are provided by norms and standarts..

Product Qualities

Increases the life comfort of the buildings.Due to the continuous insulation , it prevents heat bridges and thus it prevents unhealthy moisture, must and sweating that are created by condensation in the inner surfaces of the building. It increases the life comfort in your building. Heat conductor degree (0,045-0,057 W/mk) stands steady according to the time.

Prevents Must and Moisture The most important feature of isonaturelle® ,

prevents water and moisture through the polymers and other repellent natural materials while using as

water isolation in exterior building.(feature of 3 % water absorbtion after 120 days )

Low steam diffusion resistance factor provides to ejaculate the moisture inside and provides the

breath of the building.

Product Qualities

Prevents Must and Moisture

İsonaturelle , emerges as an important problem in the water insulated buildings. It is possible to pprevent moisture , must and moist by jacketing .I also provides water insulation.When applied İsonaturelle starting from base of the building to the walls, terrace and roof , the building is covered with a protective layer which provides breath, water repellant , heat , noise ,fire insulation. No problem occurs in the building. To cover the area of the building with Isonaturelle by digging the soil until the base in the buildings which dehumidify from basement , is the rightest way. But it can be unpreferable by the building dwellers for its expensive price.In these cases , when applied Isonaturelle from the interior wall , it prevents moist,must and moisture. The paint can be applied on Isonaturelle. Life comfort is provided. The rightest solution for terrace is again Isonaturelle ‘dir. It is applied like cement parget.It can be applied in all kinds of details without jointing on . So there will be no dots that rain waters can pass. It prevents the loss of heat in winter and excessive heats in terrace. It prevents fire isolation.It helps noise isolation by preventing the outer noises come inside. It can be applied easily on roofs as terraces.

Provides Heat InsulationThe most important feature of isonaturelle® is to

provide insulation agains heat and cold. It prevents the heat bridges between inside and outer places by continuous insulation and it prevents loss of

heat. In applied buildings , it provides %40-45 heat provident.

Product Qualities

Environment friendly.isonaturelle®, which is consist of % 98

natural materials , does not include radioactive and radyoaktif ve carcinogenic.It can be recycled.It gives maximum importance to human health as being a environment friendly material.

Resistance to Fire , Does not burn

It takes part in A Class burnproof material group because it is durable until 600°C according to DIN

4102 and it is also used as firebarrier like its function as heat insulation. It does not eject

poisonous gas , fume and chocking smoke during fire. It can be applied on steel profiles in the buildings which are constructed with steel construction.It can make fire insulation.

Product Qualities

Provides Noise Insulation According to the researches (reports) made in ITU , it is proved that the structure of isonaturelle® which consisted of natural materials , has the quality of prevents the loud noises. The quality of noise insulation of isonaturelle® is more than the materials which are used gor jacketing.Human ear can hear the sounds between 16 Hz and 20.000 . The absorption vales is measured as maximum 12 db , minumum 4 db in frequency between 50 Hz and 6.400 Hz in the experiments done for 3 cm thickness.It helps increasing the comfort by the noise insulation feature in buildings.

Durable to Crushes

It can be applied as schappe on the layers between roof , laying schappe and floor because the

compressive strenght is high (28-33 kg/cm) .It is also a material which is durable to crushes. It does not cause shrinkage crack because of sudden heat

changes.

Product Qualities

Very light It is 6 times lighter than normal liquid.This feature is so important for earthquake safety.Also it provides an important provident of its base outfit because of the decreasing of the dead load of the building.

Easily PaintedIn outside of buildings , it gets ready for painting

after 72 hours in 20°C .It is an important advantage for the project which it must be painted quickly. It

can be applied paintless without using any protective cladding in outside of the buildings.

Product Qualities

Economic,provides providentIn inside and outside facades , it provides provident from time , material and labour by extinguishing the cost of plaster when applied directly after parget.

Application Heat

DensityThermal ConductivityCompressive StrenghtSplice StrenghtPackingAppearence Shelf LifeWay of ApplicationSteam DiffusionResistance FactorConsumptionQuality of Water Absorbtion

: All weather condition which normal parget can be applied : 3,20-3,60 kg/m3: 0,045-0,057 Kcal/mh°C: 28-33 kg/cm2: 0,95 N/mm2: 9 kg Kraft bag: White , powder: 18 Months (Dry , nonmoisture places): By machine or steel trowel:: 8,33: In 1 cm/m2 3-3,5 kg: <%3 (After 120 days)

Technical Details

TECHNICAL FEATURES OF ISONATURELLE

HEAT APPLICATION

:All weather condition which normal parget can be applied

DENSITY EN 1015- 10 360 kg/m³

COMPRESSIVE STRENGHT

EN 1015- 11 ≥ 10 kg/cm² (CS II)

SPLICE STRENGHT EN 1015- 12 ≥ 0,5 N / mm² (FP ; A)

WATER ABSORBTION

EN 1015- 18 ≥ 0,05 kg / m².min0,5 ( W 1)

WATER STEAM SU TRANSMITTENCE

EN 1015- 19 ≥ 15 µ

BOND STRENGHT EN 1015- 21 ≥ 0,5 N / mm² (FP;A)

THERMAL CONDUCTIVITY

EN 1745,4,2,2

0,055 Kcal/mh°c (T 1)

NONFLAMMABILITY EN 13501- 1 Iı is endured to A class fire.

CONSUMPTION OF MATERIAL

For 1 cm thickness

3,5 kg

PACKING Kraft Bag 9kg Kraft Bag

APPEARENCE White powder

SHELF LIFE 18 Months (Dry , nonmoisture places)

WAY OF APPLICATION

“The complete 9 kg bag is mixed with 6 liters water with beater. It is applied by spray with machine or hand by using steel trowel.

Applied Easily

In all kinds of buildings, it can be directly applied to different wall unites consist of ceramic , steel , OSB , brick, gas concrete , exposed concrete Homogen structure and the application as parget make easy to control. Application faults and damages which

are arised later , can be repaired easily. It is applied with machine in wide areas. So it provides

provident in time , labour and application. It can be applied in inside surfaces in the buildings where it is

hard to apply to the outer

Product Qualities

Other material must not be mixed during the mixing .

Isonaturella mixing which is prepared In the normal weather conditions which normal liquid can be applied , is applied with steel trowel or machine between laths which are prepared

before and cleared up byThe spaces after the laths are taken out , are filled with isomaturelle.After 2-3 hours , it is

finished by making floating. After 4-5 days , it is painted by requested housepaint.

Application

isonaturelle® is packed in 9 kg’lık packings Approximately, 3-3,5 kg and 1 cm thickness 1 m2

surface is covered.. It can be applied easily until 3 cm in all kinds of inside and outer. The laths which are prepared before , are applied with suitable spaces on the

application area. All of the package is poured into a bowl . Required quantity of water is mixed and

stirred with a mixer for 5-6 minutes.

Application

EXAMPLES FROM APPLICATIONS

EXAMPLES FROM APPLICATIONS

EXAMPLES FROM APPLICATIONS

EXAMPLES FROM APPLICATIONS

EXAMPLES FROM APPLICATIONS

Certificates

The product features and quality standarts of

isonaturelle® are certificated by Istanbul Technical

University reports , Iso certificates , CE Documents and GOST-R Certificates .

®

®

®