ISO Update · PDF fileISO Update, Supplement to ISO Focus+ ... de l'Industrie, de l'Artisanat...
Transcript of ISO Update · PDF fileISO Update, Supplement to ISO Focus+ ... de l'Industrie, de l'Artisanat...
People and places
ISO Update, Supplement to ISO Focus+– April 2013
ISO Members
Since the March 2013 issue the following changes affecting ISO members have occurred:
New CEOs
Member body
AUSTRIA (ASI) Managing Director: Dr Elisabeth Stampfl-Blaha
COSTA RICA (INTECO) Executive Director: Mr Mauricio Céspedes MEXICO (DGN) Director General: Mr Alberto Ulises Esteban Marina PANAMA (COPANIT) General Director: Mr Ahmed Elias Morón SLOVAKIA (SUTN) General Director: Mr. Igor Hladik THAILAND (TISI) Secretary-General: Mr Suraphong Chiengtong
Correspondent members
KYRGYZSTAN (KYRGYZST) Director: Mr Muhamat Kaparov
Address changes:
Member bodies
EGYPT (EOS) E-mail [email protected]
Correspondent members
MAURITANIA (DNPQ)
Direction de la Normalisation et de la Promotion de la Qualité Ministère du Commerce, de l'Industrie, de l'Artisanat et du Tourisme BP : 3003 Nouakchott
ISO Update, Supplement to ISO Focus -- April 2013 1
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Stand-ard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 March to 31 March 2013
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 4 Rolling bearings
ISO/CD 464 Rolling bearings — Radial bearings with locat-ing snap ring — Dimensions and tolerances
TC 20 Aircraft and space vehicles
ISO/CD 16457 Space systems — Space environment (natural and artificial) — The Earth's ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere
ISO/CD 17540 Space systems — Liquid rocket engines and test stands — Terms and definitions
TC 22 Road vehicles
ISO/DTR 10982
Road vehicles — Test procedures for evaluat-ing out-of-position vehicle occupant interac-tions with deploying air bags
TC 23 Tractors and machinery for agriculture and forestry
ISO/CD 16411 Tractors and machinery for agriculture and forestry - Slow moving vehicle identification emblem (SMV emblem)
ISO/CD 9635-1 Agricultural irrigation equipment — Irrigation valves — Part 1: General requirements
ISO/CD 9635-2 Agricultural irrigation equipment — Irrigation valves — Part 2: Isolating valves
ISO/CD 9635-3 Agricultural irrigation equipment — Irrigation valves — Part 3: Check valves
ISO/CD 9635-4 Agricultural irrigation equipment — Irrigation valves — Part 4: Air valves
ISO/CD 9635-5 Agricultural irrigation equipment — Irrigation valves — Part 5: Control valves
TC 27 Solid mineral fuels
ISO/CD 5074 Hard coal — Determination of Hardgrove grind-ability index
TC 29 Small tools
ISO/DTS 13399-2
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items
ISO/DTS 13399-3
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items
ISO/DTS 13399-4
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items
ISO/DTS 13399-5
Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items
ISO/DTS 13399-50
Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts
ISO/DTS 13399-60
Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems
ISO/CD 9138 Abrasive grains — Sampling and splitting
TC 34 Food products
ISO/CD 6495-1 Animal feeding stuffs — Determination of water-soluble chlorides content — Part 1: Titrimetric method
ISO/CD 12966-1
Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 1: Guidelines on gas chromatography
TC 38 Textiles
ISO/CD 13629-2
Determination of antifungal axctivity of textile products — Part 2: Plate count method
ISO/CD 17299-5
Textiles — Determination of deodorant property — Part 5: Metal-oxide semiconductor sensors method
TC 39 Machine tools
ISO/CD 230-7 Test code for machine tools — Part 7: Geomet-ric accuracy of axes of rotation
ISO/CD TR 16907
Machine tools — Numerical compensation of geometric errors
TC 42 Photography
ISO/CD 18938 Imaging materials — Optical discs — Care and handling for extended storage
TC 45 Rubber and rubber products
ISO/CD 4097 Rubber, ethylene-propylene-diene (EPDM) — Evaluation procedure
TC 46 Information and documentation
ISO/CD 5127 Information and documentation — Vocabulary
TC 58 Gas cylinders
ISO/CD 14456 Gas cylinders — Gas properties and associ-ated classification (FTSC) codes
TC 59 Buildings and civil engineering works
ISO/DTS 12720
Sustainability in buildings and civil engineering works — Guidelines for the application of the general principles on sustainability
TC 67 Materials, equipment and offshore structures for petroleum, petrochemi-cal and natural gas industries
ISO/DTS 16901
Guidance on performing risk assessment in the design of onshore LNG installations including the ship/shore interface
TC 68 Financial services
ISO/CD 12812-2
Mobile Financial Services — Part 2: Secu-rity and data protection for mobile financial services
ISO/CD 12812-3
Mobile Financial Services — Part 3: Financial application management
2 ISO Update, Supplement to ISO Focus -- April 2013
ISO/CD 12812-4
Mobile Financial Services — Part 4: Mobile Person-to-Person Payments
TC 102 Iron ore and direct reduced iron
ISO/CD 11536 Iron ores — Determination of loss on ignition — Gravimetric method
TC 106 Dentistry
ISO/CD 3630-3 Dental root-canal instruments — Part 3: Con-densers, pluggers and spreaders
TC 110 Industrial trucks
ISO/CD 10896-2
Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing trucks
TC 121 Anaesthetic and respiratory equipment
ISO/CD 18190 Anaesthetic and respiratory equipment — General requirements for airways and related equipment
TC 122 Packaging
ISO/CD 17451-1
Alphanumeric Codification of Inventories for Shipments of Household Goods and Personal Effects Shipments — Part 1: Titre manque
TC 130 Graphic technology
ISO/CD 16760 Preparation and visualization of RGB images to be used in RGB-based graphic arts workflows
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/DTR 4191 Plastics piping systems for water supply — Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) — Guidance for installation
ISO/CD 6259-1 Thermoplastics pipes — Determination of ten-sile properties — Part 1: General test method
ISO/CD 6259-3 Thermoplastics pipes — Determination of ten-sile properties — Part 3: Polyolefin pipes
TC 142 Cleaning equipment for air and other gases
ISO/CD 16891 Test methods for evaluating the durability of the cleanable dust control filter media
TC 150 Implants for surgery
ISO/CD 5840-2 Cardiovascular implants — Cardiac valve pros-theses — Part 2: Surgically implanted valve substitutes
ISO/CD 7198 Cardiovascular implants — Tubular vascular prostheses
ISO/CD 11491 Implants for surgery — Test method for impact resistance of ceramic femoral head for hip joint prostheses
ISO 27186:2010/CD Amd 1
Active implantable medical devices — Four-pole connector system for implantable cardiac rhythm management devices - Dimensional and test requirements — Amendment 1
ISO/DTR 16379
Tissue-engineered medical products — Evalu-ation of anisotropic structure of articular carti-lage using DT (Diffusion Tensor)-MR Imaging
TC 159 Ergonomics
ISO/CD 24505 Ergonomics — Accessible design — Method for creating colour combinations taking ac-count of age-related changes in human colour vision
TC 163 Thermal performance and energy use in the built environment
ISO/CD 10077-2
Thermal performance of windows, doors and shutters — Calculation of thermal transmit-tance — Part 2: Numerical method for frames
TC 165 Timber structures
ISO/CD 16598 Timber structures — Structural classification for sawn timber
TC 171 Document management applications
ISO/CD TR 17797
Electronic archiving - Selection of digital stor-age media for long term preservation
TC 172 Optics and photonics
ISO/CD 17123-8
Optics and optical instruments — Field proce-dures for testing geodetic and surveying instru-ments — Part 8: GNSS field measurement systems in real-time kinematic (RTK)
ISO/CD 18259 Ophthalmic optics — Contact lens care prod-ucts — Method to assess contact lens care products with contact lenses in a lens case, challenged with bacterial and fungal organisms
TC 173 Assistive products for persons with disability
ISO/CD 17966 Assistive products for personal hygiene
TC 184 Automation systems and integration
ISO/CD 8000-8 Data quality — Part 8: Information and data quality: Concepts and measuring
TC 189 Ceramic tile
ISO/CD 16575 Test methods and specifications for Cementi-tious Backer Units (CBUs)
TC 193 Natural gas
ISO/DTR 22302
Natural gas — Calculation of methane number
TC 207 Environmental management
ISO/CD 14001 Environmental management systems — Re-quirements with guidance for use
TC 234 Fisheries and aquaculture
ISO/CD 16488 Marine finfish farms — Requirement for infra-structure, dimensioning, design, installation, operation and management of open net cage systems
CASCO Committee on conformity assessment
ISO/IEC DTS 17021-4
Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 4: Competence requirements for auditing and certification of event sustainability management
JTC 1 Information technology
ISO/IEC CD 30101
Information technology — Sensor Networks: Sensor Network and its interfaces for smart grid system
ISO/IEC CD 30128
Information technology — Sensor Networks — Generic Sensor Network Application Interface
ISO/IEC PDTR 29181-5
Information technology — Future Network — Problem statement and requirements — Part 5: Security
ISO/IEC CD 24748-5
Systems and software engineering — Life cycle management — Part 5: Software development planning
ISO/IEC CD 29155-3
Systems and software engineering — Informa-tion technology project performance bench-marking framework — Part 3: Guidance for reporting
ISO/IEC CD 17839-2
Information technology — Identification cards — Biometric system on card — Part 2: Physical characteristics
ISO/IEC CD 30129
Application of equipotential bonding and earth-ing in buildings with information technology equipment
ISO/IEC CD 24734
Information technology — Office equip-ment — Method for measuring digital printing productivity
ISO Update, Supplement to ISO Focus -- April 2013 3
DIS circulated
Period from 01 March to 31 March 2013
These documents have obtained substantial support within the ap-propriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 6 Paper, board and pulps
ISO/DIS 12625-7.2
* Tissue paper and tissue prod-ucts — Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight)
2013-05-15
(Revision of ISO 12625-7:2007)
TC 8 Ships and marine technology
ISO/DIS 16554.2
Ships and marine technology — Marine environment protection — Measurement and reporting of underwater sound radiated from merchant ships
2013-05-16
ISO/DIS 18421 * Ships and marine technology - Inland navigation vessels - Lifebuoy housings
2013-06-22
ISO/DIS 18422 * Ships and marine technology - Inland navigation vessels - Plate with instructions for rescue, resuscitation and first aid for drowning persons
2013-06-22
TC 17 Steel
ISO/DIS 683-17
* Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels
2013-08-29
(Revision of ISO 683-17:1999)
ISO/DIS 16124 * Steel wire rod — Dimensions and tolerances 2013-06-19
(Revision of ISO 16124:2004)
TC 20 Aircraft and space vehicles
ISO/DIS 10327 * Air cargo - Main deck containers - Design and testing 2013-06-19
(Revision of ISO 10327:1995)
ISO/DIS 16691 * Space systems — Thermal Control Coatings for satel-lites and spacecraft — General requirements
2013-06-26
TC 22 Road vehicles
ISO/DIS 8820-3
* Road vehicles — Fuse-links — Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)
2013-06-22
(Revision of ISO 8820-3:2010)
ISO/DIS 11452-8
* Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 8: Immunity to magnetic fields
2013-07-01
(Revision of ISO 11452-8:2007)
ISO/DIS 13674-2
* Road vehicles — Test method for the quantification of on-centre handling — Part 2: Transition test
2013-06-09
(Revision of ISO 13674-2:2006)
ISO/DIS 12405-3
* Electrically propelled road vehi-cles - Test specification for Lith-ium-ion traction battery packs and systems — Part 3: Safety performance requirements
2013-06-23
TC 23 Tractors and machinery for agriculture and forestry
ISO/DIS 16119-4
* Agricultural and forestry machin-ery — Environmental require-ments for sprayers — Part 4: Fixed and semi-mobile sprayers
2013-08-29
ISO/DIS 16122-4
* Agricultural and forestry ma-chines — Inspection of sprayers and liquid fertilizer distributors in use — Part 4: Fixed and semi mobile sprayers
2013-08-29
ISO/DIS 11783-12
* Tractors and machinery for agriculture and forestry — Se-rial control and communications data network — Part 12: Diag-nostics services
2013-06-04
(Revision of ISO 11783-12:2009)
TC 24 Particle characterization including sieving
ISO/DIS 13099-3
* Methods for zeta potential determination — Part 3: Acoustic methods
2013-06-26
TC 34 Food products
ISO/DIS 16779 * Sensory analysis — Assessment (determination and verification) of the shelf life of foodstuffs
2013-06-30
TC 44 Welding and allied processes
ISO/DIS 5826.2
* Resistance welding equipment — Transformers — General specifications applicable to all transformers
2013-05-22
(Revision of ISO 5826:1999)
ISO/DIS 9453 * Soft solder alloys — Chemical compositions and forms 2013-08-29
(Revision of ISO 9453:2006)
TC 45 Rubber and rubber products
ISO/DIS 8030 * Rubber and plastics hoses — Method of test for flammability 2013-08-29
(Revision of ISO 8030:1995)
ISO/DIS 11346 * Rubber, vulcanized or thermo-plastic — Estimation of life-time and maximum temperature of use
2013-06-30
(Revision of ISO 11346:2004)
ISO/DIS 17403 * Rubber — Determination of magnesium content of field and concentrated natural rubber latex by titration (cyanide-free method)
2013-06-16
4 ISO Update, Supplement to ISO Focus -- April 2013
ISO/DIS 3302-1
* Rubber — Tolerances for products — Part 1: Dimensional tolerances
2013-06-19
(Revision of ISO 3302-1:1996, ISO 3302-1:1996/Amd 1:2001)
TC 46 Information and documentation
ISO/DIS 25577 * Information and documentation — MarcXchange 2013-06-29
(Revision of ISO 25577:2008)
TC 54 Essential oils
ISO/DIS 16928 * Essential oil of ginger [Zingiber officinale Rosc.] 2013-06-30
TC 58 Gas cylinders
ISO/DIS 21172-1
* Gas cylinders — Welded steel pressure drums up to 3 000 litres capacity for the transport of gases — Design and construc-tion — Part 1: Capacities up to 1 000 litres
2013-06-16
TC 59 Buildings and civil engi-neering works
ISO/DIS 11617 * Buildings and Civil Engineering Works - Sealants - Determina-tion of changes in adhesion, cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weather-ing and mechanical cycling
2013-06-16
ISO/DIS 15686-4
* Building Construction - Service Life Planning — Part 4: Service Life Planning using Building Information Modelling
2013-06-16
TC 61 Plastics
ISO/DIS 11358-3.2
* Plastics — Thermogravimetry (TG) of polymers — Part 3: De-termination of the activation en-ergy using the Ozawa-Friedman plot and analysis of the reaction kinetics
2013-05-20
ISO/DIS 15512 * Plastics — Determination of water content 2013-08-29
(Revision of ISO 15512:2008)
ISO/DIS 22007-2
* Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
2013-08-29
(Revision of ISO 22007-2:2008)
ISO/DIS 4895 * Plastics — Liquid epoxy resins — Determination of tendency to crystallize
2013-08-29
(Revision of ISO 4895:1997)
ISO/DIS 15028 * Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of hydrolysable chlorine
2013-06-30
(Revision of ISO 15028:2004)
ISO/DIS 21048 * Plastics — Epoxy resins — De-termination of 1,2-glycol content 2013-06-04
(Revision of ISO 21048:2004)
ISO/DIS 25761 * Plastics — Polyols for use in the production of polyurethanes — Determination of basicity (total amine value), expressed as percent nitrogen
2013-06-30
(Revision of ISO 25761:2008)
TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries
ISO/DIS 16904 * Petroleum and natural gas indus-tries - Design and testing of LNG marine transfer arms for conven-tional onshore terminals
2013-08-15
ISO/DIS 19901-8
* Petroleum and natural gas indus-tries — Specific requirements for offshore structures — Part 8: Marine soil Investigations
2013-08-22
TC 83 Sports and recreational equipment
ISO/DIS 23537 * Requirements for sleeping bags2013-08-22
TC 85 Nuclear energy, nuclear technologies, and radio-logical protection
ISO/DIS 11665-10
* Measurement of radioactiv-ity in the environment — Air: radon-222 — Part 10: Determi-nation of diffusion coefficient in waterproof materials using activ-ity concentration measurement
2013-06-29
TC 106 Dentistry
ISO/DIS 7494-2
* Dentistry — Dental units — Part 2: Media channels and connections
2013-08-29
(Revision of ISO 11144:1995, ISO 7494-2:2003)
TC 112 Vacuum technology
ISO/DIS 3529-3
* Vacuum technology — Vocabu-lary — Part 3: Vacuum gauges 2013-06-18
(Revision of ISO 3529-3:1981)
TC 121 Anaesthetic and respiratory equipment
IEC/DIS 60601-1-12.2
Medical Electrical Equipment — Part 1-12: General requirements for basic safety and essential performance - Collateral Stand-ard: Requirements for medical electrical equipment and medical electrical systems used in the emergency medical services environment
2013-06-29
ISO/DIS 80601-2-70
* Medical Electrical Equip-ment — Part 2-70: Particular requirements for basic safety and essential performance of sleep apneoa breathing therapy equipment
2013-08-29
(Revision of ISO 17510-1:2007)
TC 130 Graphic technology
ISO/DIS 12647-3.2
Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 3: Coldset offset lithography on newsprint
2013-05-12
(Revision of ISO 12647-3:2005)
TC 131 Fluid power systems
ISO/DIS 3320 * Fluid power systems and com-ponents - Cylinder bores and piston rod diameters and area ratios - Metric series
2013-06-16
ISO Update, Supplement to ISO Focus -- April 2013 5
(Revision of ISO 3320:1987, ISO 7181:1991)
ISO/DIS 18413 * Hydraulic fluid power — Cleanli-ness of parts and components — Inspection document and principles related to contaminant collection, analysis and data reporting
2013-06-04
(Revision of ISO 18413:2002)
TC 145 Graphical symbols
ISO 7010:2011/DAmd 168
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 168: Safety sign W037: Warning; Run over by remote operator controlled machine
2013-06-16
ISO 7010:2011/DAmd 169
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 169: Safety sign P009: No climbing
2013-06-16
ISO 7010:2011/DAmd 170
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 170: Safety sign M047: Use self-contained breathing appliance
2013-06-16
ISO 7010:2011/DAmd 171
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 171: Safety sign M046: Secure gas cylinders
2013-06-16
ISO 7010:2011/DAmd 173
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 173: Safety sign E035: Liferaft knife
2013-06-16
ISO 7010:2011/DAmd 174
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 174: Safety sign E059: Escape ladder
2013-06-16
ISO 7010:2011/DAmd 175
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 175: Safety sign E060: Evacuation chair
2013-06-16
ISO 7010:2011/DAmd 176
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 176: Safety sign M048: Use gas detector
2013-06-16
ISO 7010:2011/DAmd 177
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 177: Safety sign M049: Wear protective roller sport equipment
2013-06-16
ISO 7010:2011/DAmd 178
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 178: Safety sign P039: Hot works prohibited
2013-06-16
TC 150 Implants for surgery
ISO/DIS 11663 * Quality of dialysis fluid for hae-modialysis and related therapies 2013-06-23
(Revision of ISO 11663:2009)
ISO/DIS 13958 * Concentrates for haemodialysis and related therapies 2013-06-23
(Revision of ISO 13958:2009)
ISO/DIS 13959 * Water for haemodialysis and related therapies 2013-06-23
(Revision of ISO 13959:2009)
ISO/DIS 23500 * Guidance for the preparation and quality management of fluids for haemodialysis and related therapies
2013-06-23
(Revision of ISO 23500:2011)
ISO/DIS 26722 * Water treatment equipment for haemodialysis applications and related therapies
2013-06-23
(Revision of ISO 26722:2009)
TC 154 Processes, data ele-ments and documents in commerce, industry and administration
ISO/DIS 9735-10
* Electronic data interchange for administration, commerce and transport (EDIFACT) — Applica-tion level syntax rules (Syntax version number: 4, Syntax release number: 1) — Part 10: Syntax service directories
2013-06-19
(Revision of ISO 9735-10:2002)
TC 161 Control and protective devices for gas and/or oil burners and appliances
ISO/DIS 23551-6
* Safety and control devices for gas burners and gas-burning appliances - Particular require-ments — Part 6: Thermoelectric flame supervision controls
2013-06-22
TC 163 Thermal performance and energy use in the built environment
ISO/DIS 9972 * Thermal performance of build-ings — Determination of air permeability of buildings — Fan pressurization method
2013-08-15
(Revision of ISO 9972:2006, ISO 9972:2006/Amd 1:2009)
TC 164 Mechanical testing of metals
ISO/DIS 6506-1
* Metallic materials — Brinell hard-ness test — Part 1: Test method 2013-08-08
(Revision of ISO 6506-1:2005)
ISO/DIS 6506-2
* Metallic materials — Brinell hardness test — Part 2: Verifica-tion and calibration of testing machines
2013-08-08
(Revision of ISO 6506-2:2005)
ISO/DIS 6506-3
* Metallic materials — Brinell hard-ness test — Part 3: Calibration of reference blocks
2013-08-08
(Revision of ISO 6506-3:2005)
ISO/DIS 6506-4
* Metallic materials — Brinell hardness test — Part 4: Table of hardness values
2013-08-08
(Revision of ISO 6506-4:2005)
ISO/DIS 6508-1
* Metallic materials — Rockwell hardness test — Part 1: Test method
2013-08-15
(Revision of ISO 6508-1:2005)
ISO/DIS 6508-2
* Metallic materials — Rockwell hardness test — Part 2: Verifica-tion and calibration of testing machines and indenters
2013-08-15
(Revision of ISO 6508-2:2005)
6 ISO Update, Supplement to ISO Focus -- April 2013
ISO/DIS 6508-3
* Metallic materials — Rockwell hardness test — Part 3: Calibra-tion of reference blocks
2013-08-15
(Revision of ISO 6508-3:2005)
ISO/DIS 16859-1
* Metallic materials — Leeb hard-ness test — Part 1: Test method 2013-08-08
ISO/DIS 16859-2
* Metallic materials — Leeb hard-ness test — Part 2: Verification and calibration of the testing devices
2013-08-08
ISO/DIS 16859-3
* Metallic materials — Leeb hard-ness test — Part 3: Calibration of reference test blocks
2013-08-08
TC 165 Timber structures
ISO/DIS 12122-1
* Timber structures — Determina-tion of Characteristic values — Part 1: Basic requirements
2013-06-16
(Revision of ISO/PWI 12122)
ISO/DIS 12122-2
* Timber structures — Determina-tion of Characteristic values — Part 2: Sawn timber
2013-06-16
(Revision of ISO/PWI 12122)
TC 172 Optics and photonics
ISO/DIS 8038 * Microscopes — Screw threads for objectives and related nosepieces
2013-06-12
(Revision of ISO 8038:2011)
TC 173 Assistive products for per-sons with disability
ISO/DIS 7176-22
* Wheelchairs - Technical sys-tems and aids for disabled or handicapped persons — Part 22: Set-up procedures
2013-06-26
(Revision of ISO 7176-22:2000)
TC 181 Safety of toys
ISO/DIS 8124-5
* Safety of toys — Part 5: Deter-mination of total concentration of certain elements in toys
2013-06-26
ISO/DIS 8124-6
* Safety of toys — Part 6: Toys and children's products — Determination of phthalate plasticizers in polyvinyl chloride plastics
2013-06-19
TC 198 Sterilization of health care products
ISO 11607-1:2006/DAmd 1
* Packaging for terminally steri-lized medical devices — Part 1: Requirements for materials, ster-ile barrier systems and packag-ing systems — Amendment 1
2013-08-15
ISO 11607-2:2006/DAmd 1
* Packaging for terminally steri-lized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes — Amendment 1
2013-08-15
TC 201 Surface chemical analysis
ISO/DIS 13083 * Surface chemical analysis - Scanning Probe Microscopy- Standards on the definition and calibration of spatial resolution of Scanning Spreading Resist-ance Microscopy and Scanning Capacitance Microscopy
2013-06-19
TC 204 Intelligent transport systems
ISO/DIS 17572-1
* Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 1: General requirements and conceptual model
2013-06-24
(Revision of ISO 17572-1:2008)
ISO/DIS 17572-2
* Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 2: Pre-coded location references (pre-coded profile)
2013-06-24
(Revision of ISO 17572-2:2008)
ISO/DIS 17572-3
* Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 3: Dynamic location references (dynamic profile)
2013-06-24
(Revision of ISO 17572-3:2008, ISO 17572-3:2008/Cor 1:2009)
TC 206 Fine ceramics
ISO/DIS 17094 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Test method for antibac-terial activity of semiconducting photocatalytic materials under indoor lighting environment
2013-06-19
TC 207 Environmental management
ISO/DIS 14046 * Environmental management — Water footprint — Principles, requirements and guidelines
2013-06-19
TC 211 Geographic information/Geomatics
ISO/DIS 19147 * Geographic information — Transfer Nodes 2013-06-16
TC 213 Dimensional and geometri-cal product specifications and verification
ISO 1101:2012/DAmd 1
* Geometrical product specifica-tions (GPS) — Geometrical tol-erancing — Tolerances of form, orientation, location and run-out — Amendment 1
2013-08-29
TC 214 Elevating work platforms
ISO/DIS 18893 * Mobile elevating work platforms — Safety principles, inspection, maintenance and operation
2013-06-16
(Revision of ISO 18893:2004)
TC 220 Cryogenic vessels
ISO/DIS 21029-2
* Cryogenic vessels — Transport-able vacuum insulated vessels of not more than 1 000 litres volume — Part 2: Operational requirements
2013-06-24
(Revision of ISO 21029-2:2004)
TC 238 Solid biofuels
ISO/DIS 16993 * Solid biofuels — Conversion of analytical results from one basis to another
2013-08-15
ISO/DIS 16994 * Solid biofuels — Determination of total content of sulphur and chlorine
2013-08-15
ISO/DIS 16995 * Solid biofuels — Determination of the water soluble content of chloride, sodium and potassium
2013-08-15
TC 247 Fraud countermeasures and controls
ISO Update, Supplement to ISO Focus -- April 2013 7
ISO/DIS 34001 * Security Management System2013-06-26
TC 249 Traditional chinese medicine
ISO/DIS 17218 * Sterile acupuncture needles for single use 2013-06-19
JTC 1 Information technology
ISO/IEC DIS 24771
* MAC/PHY standard for ad hoc wireless network to support QoS in an industrial work environment
2013-06-23
(Revision of ISO/IEC 24771:2009)
ISO/IEC DIS 15026-1
* Systems and software engineer-ing — Systems and software assurance — Part 1: Concepts and vocabulary
2013-06-19
(Revision of ISO/IEC TR 15026-1:2010)
ISO/IEC 15414:2006/DAmd 1
* Information technology — Open distributed processing — Ref-erence model — Enterprise language — Amendment 1: ODP — The expression of Obligations and Policies
2013-06-16
ISO/IEC DIS 25051
* Software engineering — Soft-ware product Quality Require-ments and Evaluation (SQuaRE) — Requirements for quality of Commercial Off-The-Shelf (COTS) software product and instructions for testing
2013-06-23
(Revision of ISO/IEC 25051:2006, ISO/IEC 25051:2006/Cor 1:2007)
ISO/IEC DIS 25063.3
* Systems and software engineer-ing — Systems and software product Quality Requirements and Evaluation (SQuaRE) — Common Industry Format (CIF) for usability: Context of use description
2013-05-21
ISO/IEC DIS 29121
* Information technology — Digi-tally recorded media for informa-tion interchange and storage — Data migration method for DVD-R, DVD-RW, DVD-RAM, +R, and +RW disks
2013-06-30
(Revision of ISO/IEC 29121:2009)
ISO/IEC DIS 14776-251
* Information technology -Small computer system interface (SCSI) — Part 251: USB at-tached SCSI (UAS)
2013-06-24
ISO/IEC 13818-1/DAmd 3
* Information technology — Ge-neric coding of moving pic-tures and associated audio information: Systems — Part 1: — Amendment 3: Transport of HEVC video over MPEG-2 systems
2013-06-22
ISO/IEC DIS 23000-13
* Information technology - Mul-timedia application format (MPEG-A) — Part 13: Augment-ed reality application format
2013-06-12
ISO/IEC DIS 23005-7
* Information technology — Me-dia context and control — Part 7: Conformance and reference software
2013-06-25
(Revision of ISO/IEC 23005-7:2011)
ISO/IEC DIS 23009-2
* Information technology — Dy-namic adaptive streaming over HTTP (DASH) — Part 2: Con-formance and reference software
2013-06-23
ISO/IEC 19788-1:2011/DAmd 1
* Information technology — Learn-ing, education and training — Metadata for learning resources — Part 1: Framework — Amend-ment 1
2013-06-19
ISO/IEC DIS 19794-7
* Information technology — Bio-metric data interchange formats — Part 7: Signature/sign time series data
2013-06-23
(Revision of ISO/IEC 19794-7:2007, ISO/IEC 19794-7:2007/Cor 1:2009)
FDIS circulated
Period from 01 March to 31 March 2013
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
CIE International Commission on Illumination
ISO/FDIS 11664-6
Colorimetry — Part 6: CIEDE2000 Colour-difference formula
2013-08-29
TC 4 Rolling bearings
ISO/FDIS 3290-1
* Rolling bearings — Balls — Part 1: Steel balls 2013-05-07
(Revision of ISO 3290-1:2008, ISO 3290-1:2008/Cor 1:2009)
ISO/FDIS 3290-2
* Rolling bearings — Balls — Part 2: Ceramic balls 2013-05-07
(Revision of ISO 3290-2:2008)
TC 6 Paper, board and pulps
ISO/FDIS 3037 * Corrugated fibreboard — Deter-mination of edgewise crush re-sistance (unwaxed edge method)
2013-06-15
(Revision of ISO 3037:2007)
TC 10 Technical product documentation
ISO/FDIS 128-15
* Technical product documenta-tion (TPD) — General principles of presentation — Part 15: Pres-entation of shipbuilding drawings
2013-05-26
ISO/FDIS 128-24
* Technical drawings — General principles of presentation — Part 24: Lines on mechanical engi-neering drawings
2013-05-16
(Revision of ISO 128-24:1999)
ISO/FDIS 129-4
* Technical product documenta-tion (TPD) — Indication of di-mensions and tolerances — Part 4: Dimensioning of shipbuilding drawings
2013-05-26
8 ISO Update, Supplement to ISO Focus -- April 2013
TC 17 Steel
ISO/FDIS 377 * Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
2013-05-29
(Revision of ISO 377:1997, ISO 377:1997/Cor 1:1997)
ISO/FDIS 404 * Steel and steel products — General technical delivery requirements
2013-05-29
(Revision of ISO 404:1992)
ISO/FDIS 10474
* Steel and steel products — In-spection documents 2013-05-29
(Revision of ISO 10474:1991)
TC 20 Aircraft and space vehicles
ISO/FDIS 6517 * Air cargo — Certified lower deck containers — Design and testing 2013-05-26
(Revision of ISO 6517:1992)
TC 22 Road vehicles
ISO/FDIS 18669-1
* Internal combustion engines — Piston pins — Part 1: General specifications
2013-05-14
(Revision of ISO 18669-1:2004)
ISO/FDIS 13044-2
* Road vehicles — Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations — Part 2: 50 mm fifth wheel couplings — Electrical and pneumatic interface
2013-05-13
ISO/FDIS 23273-2
* Fuel cell road vehicles — Safety specifications — Part 2: Protec-tion against hydrogen hazards for vehicles fuelled with com-pressed hydrogen
2013-05-09
(Revision of ISO 23273-2:2006)
TC 27 Solid mineral fuels
ISO/FDIS 23499
* Coal — Determination of bulk density for the use in charging of coke ovens
2013-05-28
(Revision of ISO 23499:2008)
ISO/FDIS 1170 * Coal and coke — Calculation of analyses to different bases 2013-05-26
(Revision of ISO 1170:2008)
ISO/FDIS 11722
* Solid mineral fuels — Hard coal — Determination of moisture in the general analysis test sample by drying in nitrogen
2013-05-26
(Revision of ISO 11722:1999)
TC 34 Food products
ISO 7218:2007/FDAmd 1
* Microbiology of food and animal feeding stuffs — General requirements and guidance for microbiological examinations — Amendment 1
2013-05-15
TC 36 Cinematography
ISO/FDIS 4241 * Cinematography — Theatre projection leader, trailer and cue marks — Specifications
2013-05-26
(Revision of ISO 4241:2001)
TC 38 Textiles
ISO/FDIS 20743
* Textiles — Determination of antibacterial activity of textile products
2013-05-22
(Revision of ISO 20743:2007)
TC 43 Acoustics
ISO 2922:2000/FDAmd 1
* Acoustics — Measurement of airborne sound emitted by ves-sels on inland waterways and harbours — Amendment 1
2013-05-08
TC 44 Welding and allied processes
ISO/FDIS 12996
* Mechanical joining — Destruc-tive testing of joints — Specimen dimensions and test procedure for tensile shear testing of single joints
2013-05-15
TC 45 Rubber and rubber products
ISO/FDIS 18899
* Rubber — Guide to the calibra-tion of test equipment 2013-05-27
(Revision of ISO 18899:2004)
TC 58 Gas cylinders
ISO 11120:1999/FDAmd 1
* Gas cylinders — Refillable seam-less steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l — Design construction and testing — Amendment 1: Requirements for design of tubes for embrit-tling gases
2013-05-22
TC 61 Plastics
ISO/FDIS 13931
* Carbon fibre — Determination of volume resistivity 2013-05-26
TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries
ISO/FDIS 14998
* Petroleum and natural gas indus-tries — Downhole equipment — Completion accessories
2013-05-22
TC 79 Light metals and their alloys
ISO/FDIS 7583 * Anodizing of aluminium and its alloys — Terms and definitions 2013-05-20
(Revision of ISO 7583:1986)
TC 85 Nuclear energy, nuclear technologies, and radio-logical protection
ISO/ASTM FDIS 51539
* Guide for use of radiation-sensi-tive indicators 2013-05-20
(Revision of ISO/ASTM 51539:2005)
ISO/ASTM FDIS 51939
* Practice for blood irradiation dosimetry 2013-05-20
(Revision of ISO/ASTM 51939:2005)
ISO/FDIS 13304-1
* Radiological protection — Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation — Part 1: General principles
2013-05-16
TC 94 Personal safety -- Pro-tective clothing and equipment
ISO/FDIS 12311
* Personal protective equipment — Test methods for sunglasses and related eyewear
2013-05-29
ISO Update, Supplement to ISO Focus -- April 2013 9
ISO/FDIS 12312-1
* Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use
2013-05-29
ISO/FDIS 12609-1
* Eyewear for protection against intense light sources used on hu-mans and animals for cosmetic and medical applications — Part 1: Specification for products
2013-05-12
ISO/FDIS 12609-2
* Eyewear for protection against intense light sources used on hu-mans and animals for cosmetic and medical applications — Part 2: Guidance for use
2013-05-12
TC 96 Cranes
ISO/FDIS 16625
* Cranes and hoists — Selec-tion of wire ropes, drums and sheaves
2013-05-06
(Revision of ISO 4308-2:1988, ISO 8087:1985, ISO 4308-1:2003)
TC 104 Freight containers
ISO/FDIS 1496-1
* Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes
2013-05-19
(Revision of ISO 1496-1:1990, ISO 1496-1:1990/Amd 2:1998, ISO 1496-1:1990/Amd 1:1993, ISO 1496-1:1990/Amd 3:2005, ISO 1496-1:1990/Amd 4:2006, ISO 1496-1:1990/Amd 5:2006)
TC 106 Dentistry
ISO/FDIS 21563
* Dentistry — Hydrocolloid im-pression materials 2013-05-22
(Revision of ISO 1563:1990, ISO 13716:1999, ISO 1564:1995)
TC 108 Mechanical vibration, shock and condition monitoring
ISO/FDIS 20958
* Condition monitoring and diagnostics of machine systems — Electrical signature analysis of three-phase induction motors
2013-05-08
TC 130 Graphic technology
ISO/FDIS 12647-7
* Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 7: Proofing processes working directly from digital data
2013-05-16
(Revision of ISO 12647-7:2007)
ISO/FDIS 16759
* Graphic technology — Quanti-fication and communication for calculating the carbon footprint of print media products
2013-05-16
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 10928:2009/FDAmd 1
* Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fit-tings — Methods for regression analysis and their use — Amend-ment 1
2013-05-16
TC 164 Mechanical testing of metals
ISO/FDIS 20032
* Method for evaluation of tensile properties of metallic superplas-tic materials
2013-05-14
(Revision of ISO 20032:2007)
ISO/FDIS 12110-1
* Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 1: General principles, test method and re-porting requirements
2013-05-27
ISO/FDIS 12110-2
* Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 2: Cycle counting and related data reduc-tion methods
2013-05-27
TC 182 Geotechnics
ISO 14688-1:2002/FDAmd 1
* Geotechnical investigation and testing — Identification and classification of soil — Part 1: Identification and description — Amendment 1
2013-06-29
ISO 14688-2:2004/FDAmd 1
* Geotechnical investigation and testing — Identification and classification of soil — Part 2: Principles for a classification — Amendment 1
2013-06-29
TC 184 Automation systems and integration
IEC/FDIS 62264-1
Enterprise-control system integration — Part 1: Models and terminology
2013-05-09
(Revision of IEC 62264-1:2003)
IEC/FDIS 62264-2
Enterprise-control system inte-gration — Part 2: Objects and attributes for enterprise-control system integration
2013-05-09
(Revision of IEC 62264-2:2004)
TC 188 Small craft
ISO/FDIS 7840 * Small craft — Fire-resistant fuel hoses 2013-05-08
(Revision of ISO 7840:2004)
ISO/FDIS 8469 * Small craft — Non-fire-resistant fuel hoses 2013-05-08
(Revision of ISO 8469:2006)
ISO/FDIS 10088
* Small craft — Permanently installed fuel systems 2013-05-08
(Revision of ISO 10088:2009)
TC 189 Ceramic tile
ISO/FDIS 10545-9
* Ceramic tiles — Part 9: Determi-nation of resistance to thermal shock
2013-05-29
(Revision of ISO 10545-9:2004)
TC 190 Soil quality
ISO/FDIS 17380
* Soil quality — Determination of total cyanide and easily liberat-able cyanide — Continuous-flow analysis method
2013-05-08
(Revision of ISO 17380:2004)
TC 198 Sterilization of health care products
ISO 11137-1:2006/FDAmd 1
* Sterilization of health care products — Radiation — Part 1: Requirements for development, validation and routine control of a sterilization process for medi-cal devices — Amendment 1
2013-05-29
TC 204 Intelligent transport systems
10 ISO Update, Supplement to ISO Focus -- April 2013
ISO/FDIS 15623
* Intelligent Transport Systems — Forward vehicle collision warning systems — Performance require-ments and test procedures
2013-05-26
(Revision of ISO 15623:2002)
TC 213 Dimensional and geometri-cal product specifications and verification
ISO/FDIS 2538-1
* Geometrical product specifica-tions (GPS) — Wedges — Part 1: Series of angles and slopes
2013-05-29
(Revision of ISO 2538:1998)
ISO/FDIS 2538-2
* Geometrical product specifica-tions (GPS) — Wedges — Part 2: Dimensioning and tolerancing
2013-05-29
(Revision of ISO 2538:1998)
JTC 1 Information technology
ISO/IEC FDIS 18180
* Information technology — Speci-fication for the Extensible Con-figuration Checklist Description Format (XCCDF) Version 1.2
2013-05-09
ISO/IEC FDIS 21000-21
* Information technology — Mul-timedia framework (MPEG-21) — Part 21: Media Contract Ontology
2013-05-23
ISO/IEC FDIS 23001-8
* Information technology — MPEG systems technologies — Part 8: Coding-independent code points
2013-05-28
ISO/IEC FDIS 23009-4
* Information technology — Dy-namic adaptive streaming over HTTP (DASH) — Part 4: Segment encryption and authentication
2013-05-28
ISO/IEC FDIS 24730-61
* Information technology — Real time locating systems (RTLS) — Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface
2013-05-16
Standards published
New International Standards published between 01 March and 31 March 2013
* Available in English only
** French version of standard previously published in English only
Price group
IIW International Institute of Welding
ISO 14346:2013
* Static design procedure for welded hollow-section joints — Recommendations
U
TC 2 Fasteners
ISO 4034:2012/Cor 1
Hexagon regular nuts (style 1) — Prod-uct grade C — Technical Corrigendum 1
free
ISO 7719:2012/Cor 1
Prevailing torque type all-metal hexa-gon regular nuts — Property classes 5, 8 and 10 — Technical Corrigendum 1
free
ISO 10511:2012/Cor 1
Prevailing torque type hexagon thin nuts (with non-metallic insert) — Tech-nical Corrigendum 1
free
TC 6 Paper, board and pulps
ISO 12625-11:2012
Tissue paper and tissue products — Part 11: Determination of wet ball burst strength
E
TC 8 Ships and marine technology
ISO 16304:2013
* Ships and marine technology — Marine environment protection — Arrange-ment and management of port waste reception facilities
L
ISO 16446:2013
* Ships and marine technology — Ma-rine environment protection — Adapter for joining dissimilar boom connectors
C
TC 17 Steel
ISO 14404-1:2013
* Calculation method of carbon dioxide emission intensity from iron and steel production — Part 1: Steel plant with blast furnace
M
ISO 14404-2:2013
* Calculation method of carbon dioxide emission intensity from iron and steel production — Part 2: Steel plant with electric arc furnace (EAF)
K
TC 20 Aircraft and space vehicles
ISO 13832:2013
* Aerospace — Wire, aluminium alloy and copper-clad aluminium conductors — General performance requirements
F
ISO 16049-1:2013
* Air cargo equipment — Restraint straps — Part 1: Design criteria and testing methods
K
TC 22 Road vehicles
ISO 11451-4:2013
Road vehicles — Vehicle test methods for electrical disturbances from narrow-band radiated electromagnetic energy — Part 4: Bulk current injection (BCI)
D
ISO 14229-1:2013
* Road vehicles — Unified diagnostic services (UDS) — Part 1: Specification and requirements
XC
ISO 14229-6:2013
* Road vehicles — Unified diagnostic services (UDS) — Part 6: Unified diag-nostic services on K-Line implementa-tion (UDSonK-Line)
E
ISO 14230-2:2013
* Road vehicles — Diagnostic commu-nication over K-Line (DoK-Line) — Part 2: Data link layer
U
ISO 12345:2013
* Diesel engines — Cleanliness assess-ment of fuel injection equipment R
ISO 14451-1:2013
* Pyrotechnic articles — Pyrotech-nic articles for vehicles — Part 1: Terminology
G
ISO 14451-2:2013
Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 2: Test methods
M
ISO 14451-3:2013
Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 3: Labelling C
ISO 14451-4:2013
Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 4: Require-ments and categorization for micro gas generators
B
ISO 14451-5:2013
Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 5: Require-ments and categorization for airbag gas generators
C
ISO Update, Supplement to ISO Focus -- April 2013 11
ISO 14451-6:2013
Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 6: Require-ments and categorization for airbag modules
C
ISO 14451-7:2013
Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 7: Require-ments and categorization for seatbelt pretensioners
B
ISO 14451-8:2013
Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 8: Require-ments and categorization for igniters
B
ISO 14451-9:2013
Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 9: Require-ments and categorization for actuators
B
ISO 14451-10:2013
Pyrotechnic articles — Pyrotech-nic articles for vehicles — Part 10: Requirements and categorization for semi-finished products
A
TC 29 Small tools
ISO 525:2013 Bonded abrasive products — General requirements G
ISO 23480:2013
Tools for pressing — Sliding platesC
ISO 5609-1:2012
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 1: Designation, styles, dimen-sions and calculation for corrections
L
ISO 5609-2:2012
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 2: Style F
D
ISO 5609-3:2012
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 3: Style K
D
ISO 5609-4:2012
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 4: Style L
D
ISO 5609-5:2012
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 5: Style U
D
ISO 5609-6:2012
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 6: Style Q
D
TC 34 Food products
ISO 6887-6:2013
Microbiology of food and animal feed — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 6: Specific rules for the preparation of samples taken at the primary produc-tion stage
E
ISO/TS 15216-1:2013
Microbiology of food and animal feed — Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR — Part 1: Method for quantification
P
ISO/TS 15216-2:2013
Microbiology of food and animal feed — Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR — Part 2: Method for qualitative detection
N
ISO 21571:2005/Amd 1:2013
Foodstuffs — Methods of analysis for the detection of genetically modified organisms and derived products — Nucleic acid extraction — Amendment 1
XZ
TC 35 Paints and varnishes
ISO 11890-2:2013
Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 2: Gas-chromatograph-ic method
J
ISO 15110:2013
Paints and varnishes — Artificial weathering including acidic deposition G
TC 38 Textiles
ISO 105-E01:2013
Textiles — Tests for colour fastness — Part E01: Colour fastness to water C
ISO 105-E02:2013
Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water C
ISO 105-E04:2013
Textiles — Tests for colour fast-ness — Part E04: Colour fastness to perspiration
C
TC 41 Pulleys and belts (including veebelts)
ISO 340:2013 Conveyor belts — Laboratory scale flammability characteristics — Require-ments and test method
D
ISO 21178:2013
Light conveyor belts — Determination of electrical resistances K
ISO 21179:2013
Light conveyor belts — Determination of the electrostatic field generated by a running light conveyor belt
C
TC 42 Photography
ISO 2721:2013 * Photography — Film-based cameras — Automatic controls of exposure F
ISO 18927:2013
* Imaging materials — Recordable compact disc systems — Method for estimating the life expectancy based on the effects of temperature and rela-tive humidity
M
TC 43 Acoustics
ISO/PAS 11819-4:2013
* Acoustics — Method for measuring the influence of road surfaces on traffic noise — Part 4: SPB method using backing board
E
TC 44 Welding and allied processes
ISO 15012-1:2013
Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 1: Requirements for testing and mark-ing of separation efficiency
G
ISO/TR 15608:2013
Welding — Guidelines for a metallic materials grouping system D
ISO 15609-6:2013
Specification and qualification of weld-ing procedures for metallic materials — Welding procedure specification — Part 6: Laser-arc hybrid welding
E
TC 45 Rubber and rubber products
ISO 3384-1:2011/Amd 1:2013
Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 1: Testing at constant temperature — Amendment 1: Revised calibration schedule
XZ
TC 46 Information and documentation
ISO 25964-2:2013
* Information and documentation — Thesauri and interoperability with other vocabularies — Part 2: Interoperability with other vocabularies
X
TC 54 Essential oils
12 ISO Update, Supplement to ISO Focus -- April 2013
ISO 4719:2012 Essential oil of spike lavender (Lavan-dula latifolia Medikus), Spanish type D
ISO 4731:2012 Essential oil of geranium (Pelargonium x ssp.) E
TC 58 Gas cylinders
ISO 11114-2:2013
Gas cylinders — Compatibility of cylin-der and valve materials with gas con-tents — Part 2: Non-metallic materials
G
TC 59 Buildings and civil engineering works
ISO 16354:2013
* Guidelines for knowledge libraries and object libraries W
TC 61 Plastics
ISO 11357-5:2013
Plastics — Differential scanning calorimetry (DSC) — Part 5: Determina-tion of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
E
ISO 307:2007/Amd 1:2013
Plastics — Polyamides — Determina-tion of viscosity number — Amend-ment 1: Corrections, and update to reference to JIS K 6920-2
XZ
ISO 12817:2013
* Fibre-reinforced plastic composites — Determination of open-hole compres-sion strength
J
TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries
ISO 13628-5:2009
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 5: Subsea umbilicals
XC
ISO 14692-2:2002
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture
X
TC 69 Applications of statistical methods
ISO 7870-2:2013
* Control charts — Part 2: Shewhart control charts S
ISO 11843-6:2013
* Capability of detection — Part 6: Meth-odology for the determination of the critical value and the minimum detect-able value in Poisson distributed meas-urements by normal approximations
K
TC 70 Internal combustion engines
ISO 8528-5:2013
Reciprocating internal combustion en-gine driven alternating current generat-ing sets — Part 5: Generating sets
R
TC 83 Sports and recreational equipment
ISO 5902:2013 Alpine skis — Determination of elastic properties E
TC 85 Nuclear energy, nuclear tech-nologies, and radiological protection
ISO/ASTM 51261:2013
* Practice for calibration of routine dosimetry systems for radiation processing
J
ISO/ASTM 51631:2013
* Practice for use of calorimetric dosim-etry systems for electron beam dose measurements and dosimetery system calibrations
E
ISO/ASTM 51702:2013
* Practice for dosimetry in a gamma facility for radiation processing D
ISO/ASTM 51940:2013
* Guide for dosimetry for sterile insects release programs F
ISO/ASTM 52116:2013
* Practice for dosimetry for a self-con-tained dry-storage gamma irradiator F
TC 92 Fire safety
ISO 14934-2:2013
Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods
T
ISO/TS 13447:2013
* Fire safety engineering — Guidance for use of fire zone models K
TC 94 Personal safety -- Protective clothing and equipment
ISO 20471:2013
High visibility clothing — Test methods and requirements L
TC 98 Bases for design of structures
ISO 3898:2013 * Bases for design of structures — Names and symbols of physical quan-tities and generic quantities
S
TC 106 Dentistry
ISO 6873:2013 Dentistry — Gypsum productsK
ISO 1797-3:2013
Dentistry — Shanks for rotary instru-ments — Part 3: Shanks made of ceramics
D
ISO 16635-1:2013
* Dentistry — Dental rubber dam tech-nique — Part 1: Hole punch B
TC 108 Mechanical vibration, shock and condition monitoring
ISO 18436-8:2013
* Condition monitoring and diagnostics of machines — Requirements for quali-fication and assessment of personnel — Part 8: Ultrasound
E
TC 112 Vacuum technology
ISO 3567:2011 Vacuum gauges — Calibration by direct comparison with a reference gauge
G
ISO 27893:2011
Vacuum technology — Vacuum gauges — Evaluation of the uncertainties of results of calibrations by direct com-parison with a reference gauge
H
TC 117 Fans
ISO 12759:2010/Amd 1:2013
Fans — Efficiency classification for fans — Amendment 1 XZ
TC 119 Powder metallurgy
ISO 4492:2013 Metallic powders, excluding powders for hardmetals — Determination of dimensional changes associated with compacting and sintering
D
TC 122 Packaging
ISO 13127:2012/Cor 1:2012
Packaging — Child resistant packaging — Mechanical test methods for reclos-able child resistant packaging systems — Technical Corrigendum 1
free
ISO Update, Supplement to ISO Focus -- April 2013 13
ISO/TR 16218:2013
* Packaging and the environment — Processes for chemical recovery F
TC 126 Tobacco and tobacco products
ISO 10315:2013
Cigarettes — Determination of nicotine in smoke condensates — Gas-chroma-tographic method
D
TC 127 Earth-moving machinery
ISO 7133:2013 * Earth-moving machinery — Scrap-ers — Terminology and commercial specifications
K
TC 131 Fluid power systems
ISO 14540:2013
* Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)
C
ISO 14541:2013
* Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
C
ISO/TR 17209:2013
Hydraulic fluid power — Two-, three- and four-port screw-in cartridge valves — Cavities with ISO 725 (UN and UNF) threads
F
TC 142 Cleaning equipment for air and other gases
ISO 10121-2:2013
Test methods for assessing the perfor-mance of gas-phase air cleaning media and devices for general ventilation — Part 2: Gas-phase air cleaning devices (GPACD)
R
ISO 29462:2013
Field testing of general ventilation filtra-tion devices and systems for in situ removal efficiency by particle size and resistance to airflow
S
TC 146 Air quality
ISO 13833:2013
Stationary source emissions — De-termination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide — Radiocarbon sampling and determination
R
ISO 16911-1:2013
Stationary source emissions — Manual and automatic determination of veloc-ity and volume flow rate in ducts — Part 1: Manual reference method
X
ISO 16911-2:2013
Stationary source emissions — Manual and automatic determination of veloc-ity and volume flow rate in ducts — Part 2: Automated measuring systems
U
ISO 25597:2013
* Stationary source emissions — Test method for determining PM2,5 and PM10 mass in stack gases using cy-clone samplers and sample dilution
V
TC 147 Water quality
ISO 27108:2010
Water quality — Determination of selected plant treatment agents and biocide products — Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS)
R
ISO 5667-3:2012
Water quality — Sampling — Part 3: Preservation and handling of water samples
S
TC 150 Implants for surgery
ISO 5840-3:2013
Cardiovascular implants — Cardiac valve prostheses — Part 3: Heart valve substitutes implanted by transcatheter techniques
XA
ISO 8637:2010/Amd 1:2013
* Cardiovascular implants and extra-corporeal systems — Haemodialys-ers, haemodiafilters, haemofilters and haemoconcentrators — Amendment 1: Revision to Figure 2 — Main fitting dimensions of dialysis fluid inlet and outlet ports
XZ
TC 155 Nickel and nickel alloys
ISO 11433:1993/Amd 1:2013
* Nickel alloys — Determination of titanium content — Diantipyrylmethane molecular absorption spectrometric method — Amendment 1: Alternative procedure for the preparation of the titanium standard solution
XZ
TC 156 Corrosion of metals and alloys
ISO 7539-1:2012
Corrosion of metals and alloys — Stress corrosion testing — Part 1: Gen-eral guidance on testing procedures
K
ISO 7539-10:2013
* Corrosion of metals and alloys — Stress corrosion testing — Part 10: Reverse U-bend method
F
ISO 13174:2012
Cathodic protection of harbour installations P
ISO 21601:2013
Corrosion of metals and alloys — Guidelines for assessing the sig-nificance of stress corrosion cracks detected in service
K
TC 159 Ergonomics
ISO 9241-154:2013
Ergonomics of human-system interac-tion — Part 154: Interactive voice response (IVR) applications
Q
TC 163 Thermal performance and en-ergy use in the built environment
ISO 12655:2013
* Energy performance of buildings — Presentation of measured energy use of buildings
G
ISO 18096:2013
* Thermal insulating products for build-ing equipment and industrial installa-tions — Determination of maximum service temperature for preformed pipe insulation
H
TC 165 Timber structures
ISO/TR 18267:2013
* Timber structures — Review of design standards M
TC 172 Optics and photonics
ISO/TR 16743:2013
* Optics and photonics — Wavefront sensors for characterising optical sys-tems and optical components
N
ISO 8600-1:2013
* Endoscopes — Medical endoscopes and endotherapy devices — Part 1: General requirements
G
ISO 11553-3:2013
Safety of machinery — Laser process-ing machines — Part 3: Noise reduc-tion and noise measurement methods for laser processing machines and hand-held processing devices and as-sociated auxiliary equipment (accuracy grade 2)
F
TC 178 Lifts, escalators and moving walks
ISO 22201-2:2013
* Lifts (elevators), escalators and moving walks — Programmable electronic systems in safety related applications — Part 2: Escalators and moving walks (PESSRAE)
M
14 ISO Update, Supplement to ISO Focus -- April 2013
ISO/TR 22201-3:2013
* Lifts (elevators), escalators and moving walks — Programmable electronic systems in safety related applications — Part 3: Life cycle guideline for pro-grammable electronic systems related to PESSRAL and PESSRAE
E
TC 184 Automation systems and integration
ISO 16739:2013
* Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries
L
TC 188 Small craft
ISO 16180:2013
Small craft — Navigation lights — In-stallation, placement and visibility E
ISO 15027-1:2012
Immersion suits — Part 1: Constant wear suits, requirements including safety
J
ISO 15027-2:2012
Immersion suits — Part 2: Abandon-ment suits, requirements including safety
K
ISO 15027-3:2012
Immersion suits — Part 3: Test methods J
TC 190 Soil quality
ISO 13196:2013
Soil quality — Screening soils for se-lected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
F
TC 195 Building construction machinery and equipment
ISO 15688:2012
Road construction and maintenance equipment — Soil stabilizers — Termi-nology and commercial specifications
J
TC 198 Sterilization of health care products
ISO 13408-6:2005/Amd 1:2013
Aseptic processing of health care products — Part 6: Isolator systems — Amendment 1
XZ
TC 201 Surface chemical analysis
ISO/TR 19319:2013
* Surface chemical analysis — Funda-mental approaches to determination of lateral resolution and sharpness in beam-based methods
XA
TC 204 Intelligent transport systems
ISO 12855:2012/Cor 1:2013
* Electronic fee collection — Information exchange between service provision and toll charging — Technical Cor-rigendum 1
free
ISO/TS 13141:2010/Cor 1:2013
* Electronic fee collection — Localisa-tion augmentation communication for autonomous systems — Technical Corrigendum 1
free
ISO/TR 13184-1:2013
* Intelligent transport systems — Guid-ance protocol via personal ITS station for advisory safety systems — Part 1: General information and use case definitions
M
ISO 14906:2011/Cor 1:2013
* Electronic fee collection — Application interface definition for dedicated short-range communication — Technical Corrigendum 1
free
ISO/TS 17575-1:2010/Cor 1:2013
* Electronic fee collection — Application interface definition for autonomous systems — Part 1: Charging — Techni-cal Corrigendum 1
free
ISO/TS 17575-3:2011/Cor 1:2013
* Electronic fee collection — Application interface definition for autonomous systems — Part 3: Context data — Technical Corrigendum 1
free
ISO 26683-1:2013
* Intelligent transport systems — Freight land conveyance content identification and communication — Part 1: Context, architecture and referenced standards
X
TC 206 Fine ceramics
ISO 11894-1:2013
* Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for conductivity measure-ment of ion-conductive fine ceramics — Part 1: Oxide-ion-conducting solid electrolytes
D
ISO 14574:2013
Fine ceramics (advanced ceramics, ad-vanced technical ceramics) - Mechani-cal properties of ceramic composites at high temperature - Determination of tensile properties
J
ISO 23146:2012
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for fracture toughness of monolithic ceramics — Single-edge V-notch beam (SEVNB) method
J
TC 207 Environmental management
ISO 14065:2013
Greenhouse gases — Requirements for greenhouse gas validation and verifica-tion bodies for use in accreditation or other forms of recognition
N
TC 209 Cleanrooms and associated controlled environments
ISO 14644-10:2013
Cleanrooms and associated controlled environments — Part 10: Classifica-tion of surface cleanliness by chemical concentration
P
TC 212 Clinical laboratory testing and in vitro diagnostic test systems
ISO 15189:2012
Medical laboratories — Requirements for quality and competence T
ISO 19001:2013
In vitro diagnostic medical devices — Information supplied by the manufac-turer with in vitro diagnostic reagents for staining in biology
G
TC 215 Health informatics
ISO 13120:2013
Health informatics — Syntax to represent the content of healthcare classification systems — Classification Markup Language (ClaML)
R
ISO/TS 13582:2013
* Health informatics — Sharing of OID registry information N
JTC 1 Information technology
ISO/IEC 17568:2013
* Information technology — Telecom-munications and information ex-change between systems — Close proximity electric induction wireless communications
X
ISO/IEC 18092:2013
* Information technology — Telecom-munications and information exchange between systems — Near Field Com-munication — Interface and Protocol (NFCIP-1)
S
ISO/IEC 18450:2013
* Information technology — Telecom-munications and information exchange between systems — Web Services Description Language (WSDL) for CSTA Phase III
XC
ISO Update, Supplement to ISO Focus -- April 2013 15
ISO/IEC 19770-1:2012
Information technology — Software as-set management — Part 1: Processes and tiered assessment of conformance
W
ISO/IEC TR 24772:2013
* Information technology — Program-ming languages — Guidance to avoiding vulnerabilities in programming languages through language selection and use
XC
ISO/IEC TR 29108:2013
* Information technology — Terminology for intelligent homes W
ISO/IEC 24761:2009/Cor 1:2013
* Information technology — Security techniques — Authentication context for biometrics — Technical Corrigen-dum 1
free
ISO/IEC 29115:2013
* Information technology — Security techniques — Entity authentication assurance framework
R
ISO/IEC 29142-1:2013
* Information technology — Print cartridge characterization — Part 1: General: terms, symbols, notations and cartridge characterization framework
N
ISO/IEC 29142-2:2013
* Information technology — Print car-tridge characterization — Part 2: Car-tridge characterization data reporting
H
ISO/IEC 15444-11:2007/Amd 1:2013
* Information technology — JPEG 2000 image coding system: Wireless — Part 11: — Amendment 1: IP based wire-less networks
XZ
ISO/IEC 23005-6:2013
* Information technology — Media context and control — Part 6: Common types and tools
XB
ISO/IEC 23006-5:2013
* Information technology — Multimedia service platform technologies — Part 5: Service aggregation
U
ISO/IEC 15961-1:2013
* Information technology — Radio frequency identification (RFID) for item management: Data protocol — Part 1: Application interface
XB
ISO/IEC 15962:2013
* Information technology — Radio frequency identification (RFID) for item management — Data protocol: data encoding rules and logical memory functions
XC
ISO/IEC 29160:2012
Information technology — Radio fre-quency identification for item manage-ment — RFID Emblem
K
ISO/IEC 19794-9:2011/Amd 1:2013
* Information technology — Biometric data interchange formats — Part 9: Vascular image data — Amendment 1: Conformance testing methodology
XZ
ISO/IEC 19794-14:2013
* Information technology — Biometric data interchange formats — Part 14: DNA data
R
Standards confirmed
The following International Standards are confimred for a five year period:
TC 2 Fasteners
ISO 16047:2005
TC 10 Technical product documentation
ISO 129-1:2004
TC 20 Aircraft and space vehicles
ISO 14950:2004 (reconfirmed)
ISO 15390:2004 (reconfirmed)
ISO 16458:2004 (reconfirmed)
ISO 17401:2004 (reconfirmed)
TC 22 Road vehicles
ISO 10605:2008
ISO 15764:2004 (reconfirmed)
TC 23 Tractors and machinery for agriculture and forestry
ISO 2057:1981 (reconfirmed)
ISO 6489-1:2001 (reconfirmed)
ISO 8759-1:1998 (reconfirmed)
ISO 20019:2001 (reconfirmed)
ISO 26322-1:2008
ISO 14131:2005 (reconfirmed)
TC 30 Measurement of fluid flow in closed conduits
ISO 2975-1:1974 (reconfirmed)
TC 34 Food products
ISO/TS 2963:2006 (reconfirmed)
ISO/TS 27105:2009
ISO/TS 27106:2009
TC 35 Paints and varnishes
ISO 8502-5:1998 (reconfirmed)
TC 36 Cinematography
ISO 8567:2002 (reconfirmed)
TC 38 Textiles
ISO 7771:1985 (reconfirmed)
TC 39 Machine tools
ISO 5169:1977 (reconfirmed)
ISO/TR 230-9:2005
ISO 13041-7:2004 (reconfirmed)
TC 41 Pulleys and belts (including veebelts)
ISO 5290:2001 (reconfirmed)
TC 45 Rubber and rubber products
ISO 11193-1:2008
TC 48 Laboratory equipment
ISO 4785:1997 (reconfirmed)
ISO 4798:1997 (reconfirmed)
ISO 12771:1997 (reconfirmed)
ISO 12772:1997 (reconfirmed)
ISO 15212-2:2002 (reconfirmed)
ISO 718:1990 (reconfirmed)
ISO 720:1985 (reconfirmed)
ISO 1776:1985 (reconfirmed)
ISO 12775:1997 (reconfirmed)
TC 59 Buildings and civil engineering works
ISO 3443-3:1987 (reconfirmed)
ISO 3443-5:1982 (reconfirmed)
TC 63 Glass containers
ISO 7459:2004 (reconfirmed)
ISO 8113:2004 (reconfirmed)
16 ISO Update, Supplement to ISO Focus -- April 2013
TC 72 Textile machinery and accessories
ISO 98:2001 (reconfirmed)
ISO 344:1981 (reconfirmed)
ISO 8114:1990 (reconfirmed)
ISO 8115:1986 (reconfirmed)
ISO 8489-1:1995 (reconfirmed)
ISO 8489-2:1995 (reconfirmed)
ISO 8489-3:1995 (reconfirmed)
ISO 8489-4:1995 (reconfirmed)
ISO 8489-5:1995 (reconfirmed)
ISO 28239:2008
ISO 363-1:2006
ISO 363-2:2006
ISO 366-4:2005
ISO 366-5:2006
ISO 5247-3:1993 (reconfirmed)
ISO 7506:1984 (reconfirmed)
ISO 7839:2005
ISO 8116-1:1995 (reconfirmed)
ISO 8117:2003
ISO 8118-1:2006
ISO 8118-2:2006
ISO 8119-1:1989 (reconfirmed)
ISO 8119-2:1989 (reconfirmed)
ISO 8121:2007
ISO 8122:2003
ISO 8188:2007
ISO 8640-1:2004 (reconfirmed)
ISO 8640-2:2004 (reconfirmed)
ISO 8640-3:2002 (reconfirmed)
ISO 9473-1:2006
ISO 9473-2:2006
ISO 10223:2005
ISO 11675:2005
ISO 13990-1:2006
ISO 13990-2:2006
ISO 13990-3:2006
ISO 14500:2003
ISO 15228:2005
TC 83 Sports and recreational equipment
ISO 13993:2001 (reconfirmed)
TC 92 Fire safety
ISO 5925-1:2007
TC 94 Personal safety -- Protective clothing and equipment
ISO 9150:1988 (reconfirmed)
TC 100 Chains and chain sprockets for power transmission and conveyors
ISO 3512:1992 (reconfirmed)
TC 123 Plain bearings
ISO 12301:2007
TC 131 Fluid power systems
ISO 4407:2002 (reconfirmed)
ISO 3601-2:2008
ISO 3601-4:2008
ISO 6194-1:2007
ISO 4392-1:2002 (reconfirmed)
TC 135 Non-destructive testing
ISO 11699-1:2008
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 8361-1:1991 (reconfirmed)
ISO 8361-3:1991 (reconfirmed)
TC 147 Water quality
ISO 6107-6:2004 (reconfirmed)
TC 192 Gas turbines
ISO 2314:2009
ISO 3977-1:1997 (reconfirmed)
ISO 3977-2:1997 (reconfirmed)
ISO 3977-3:2004 (reconfirmed)
ISO 3977-7:2002 (reconfirmed)
ISO 3977-8:2002 (reconfirmed)
TC 195 Building construction machinery and equipment
ISO 15878:2008
ISO 19433:2008
ISO 19452:2008
TC 211 Geographic information/Geomatics
ISO 19106:2004 (reconfirmed)
ISO 19113:2002
ISO 19116:2004 (reconfirmed)
ISO 19125-1:2004 (reconfirmed)
ISO 19125-2:2004 (reconfirmed)
JTC 1 Information technology
ISO/IEC 7816-2:2007
ISO/IEC 10967-2:2001
ISO 1861:1975 (reconfirmed)
ISO 4057:1986 (reconfirmed)
ISO 8063-1:1986 (reconfirmed)
ISO 8063-2:1986 (reconfirmed)
ISO 8378-2:1986 (reconfirmed)
ISO 8378-3:1986 (reconfirmed)
ISO 8462-1:1986 (reconfirmed)
ISO 8462-2:1986 (reconfirmed)
ISO 8630-2:1987 (reconfirmed)
ISO 2132:1972 (reconfirmed)
ISO 2133:1976 (reconfirmed)
ISO 3066:1986 (reconfirmed)
ISO 4232-2:1980 (reconfirmed)
ISO 4232-3:1984 (reconfirmed)
ISO 5138-1:1978 (reconfirmed)
ISO 5138-2:1980 (reconfirmed)
ISO 5138-3:1981 (reconfirmed)
ISO 5138-4:1981 (reconfirmed)
ISO 5138-5:1981 (reconfirmed)
ISO 5138-7:1986 (reconfirmed)
ISO 5138-9:1984 (reconfirmed)
ISO/IEC 10561:1999
(reconfirmed)
ISO/IEC 14473:1999
(reconfirmed)
ISO Update, Supplement to ISO Focus -- April 2013 17
ISO/IEC 15404:2000
(reconfirmed)
ISO/IEC 15775:1999
(reconfirmed)
ISO/IEC TR 19797:2004
ISO/IEC 19799:2007
ISO/IEC 24700:2005
ISO/IEC TR 24705:2005
ISO/IEC 24712:2007
ISO/IEC TR 22250-1:2002
Standards withdrawn
Period from 01 March to 31 March 2013
TC 38 Textiles
ISO 2649:1974 (replaced by )
TC 45 Rubber and rubber products
ISO 5945:1989 (replaced by )
ISO 8054:1996 (replaced by )
TC 46 Information and documentation
ISO 2788:1986 (replaced by ISO 25964-1:2011, ISO 25964-2:2013)
ISO 5964:1985 (replaced by ISO 25964-1:2011, ISO 25964-2:2013)
TC 59 Buildings and civil engineering works
ISO 15686-6:2004 (replaced by )
TC 61 Plastics
ISO 3167:2002 (replaced by )
TC 69 Applications of statistical methods
ISO 8258:1991 (replaced by ISO 7870-2:2013)
TC 70 Internal combustion engines
ISO 4548-11:1997 (replaced by )
TC 84 Devices for administration of medicinal products and intravascular catheters
ISO 595-1:1986 (replaced by )
ISO 595-2:1987 (replaced by )
TC 108 Mechanical vibration, shock and condi-tion monitoring
ISO 8569:1996 (replaced by )
TC 112 Vacuum technology
ISO 3669:1986 (replaced by )
TC 184 Automation systems and integration
ISO/PAS 16739:2005
(replaced by ISO 16739:2013)
TC 204 Intelligent transport systems
ISO/TS 26683-1:2012
(replaced by ISO 26683-1:2013)
JTC 1 Information technology
ISO/IEC 9594-10:2008
(replaced by )
Meeting calendar
(update at 01 March 2013)
* Information definite but meeting not yet formally convened
** Provisional
April 2013
2-5 Vienna (Austria) TC 85/SC 2 Nuclear energy, nuclear technologies, and radiological pro-tection/Radiological protection
4 Rotterdam (Netherlands)
TC 67/SC 8 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Arctic operations
8-10 London (United Kingdom)
TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis
8-12 Madrid (Spain) JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)
8-12 Sydney (Australia)
PC 271 Compliance programs
9 Helsinki (Finland) TC 117 Fans
12 Gaithersburg (USA)
TC 84 Devices for adminis-tration of medicinal products and intra-vascular catheters
12 Paris (France) TC 92/SC 1 Fire safety/Fire initia-tion and growth
15 Peterbor-ough (United Kingdom)
TC 23/SC 2 Tractors and machin-ery for agriculture and forestry/Common tests
15-16 Stuttgart (Germany)
TC 39/SC 4 Machine tools/Wood-working machines
15-19 Seattle (USA) TC 204 Intelligent transport systems
16-17 Peterbor-ough (United Kingdom)
TC 23/SC 14 Tractors and machin-ery for agriculture and forestry/Operator controls, operator symbols and other displays, operator manuals
16-17 Frankfurt (Germany)
TC 48 Laboratory equipment
17-18 Paris (France) TC 17/SC 3 Steel/Steels for struc-tural purposes
18 ISO Update, Supplement to ISO Focus -- April 2013
17-18 Xian (China) TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems
19 Paris (France) TC 86/SC 8 Refrigeration and air-conditioning/Refriger-ants and refrigeration lubricants
20 Moscow (Rus-sian Federation)
TC 92/SC 3 Fire safety/Fire threat to people and environment
20 Moscow (Rus-sian Federation)
TC 92/SC 4 Fire safety/Fire safety engineering
21-23 Vancouver (Canada)
TC 34/SC 4 Food products/Cere-als and pulses
21-26 Mexico (Mexico) TC 215 Health informatics
22-26 Winches-ter (United Kingdom)
JTC 1/SC 37 Information technology/Biometrics
22-26 Berlin (Germany) TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machine systems
23-24 Dresden (Germany)
TC 219 Floor coverings
25-26 Lünen (Germany) TC 82 Mining
25-26 Frankfurt (Germany)
TC 83/SC 5 Sports and recrea-tional equipment/Ice hockey equipment and facilities
25-26 New York (USA) ** TC 178 Lifts, escalators and moving walks
26 Pavia (Italy) TC 194 Biological evaluation of medical devices
26 Cape Town (South Africa)
TC 242 Energy Management
26-27 Clausthal-Zeller-feld (Germany)
TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization
29-30 Sophia Antipolis (France)
* JTC 1/SC 27 Information tech-nology/IT Security techniques
April-May 2013
29-2 Sydney (Australia)
PC 272 Forensic sciences
29-3 Calgary (Canada) TC 251 Project committee: Asset management
May 2013
2 Calgary (Canada) TC 23/SC 19 Tractors and machin-ery for agriculture and forestry/Agricultural electronics
4 Sydney (Australia)
TC 110/SC 4 Industrial trucks/Rough-terrain trucks
7 Milan (Italy) TC 138/SC 3 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial applications
13 Berlin (Germany) TC 29/SC 9 Small tools/Tools with cutting edges made of hard cutting materials
13 Guangzhou (China)
TC 68/SC 2 Financial services/Financial Services, security
13 Guangzhou (China)
TC 68/SC 4 Financial services/Securities and related financial instruments
13-14 Brussels (Belgium)
TC 122/SC 4 Packaging/Packaging and environment
13-17 Tokyo (Japan) TC 114 Horology
13-17 Vienna (Austria) TC 171 Document manage-ment applications
14 Berlin (Germany) TC 29/SC 2 Small tools/High speed steel cut-ting tools and their attachments
14 Guangzhou (China)
* TC 68/SC 7 Financial services/Core banking
14 Burr Ridge (USA) TC 195/SC 1 Building construc-tion machinery and equipment/Machinery and equipment for concrete work
15 Santa María de Lamas (Portugal)
TC 87 Cork
15 Tokyo (Japan) TC 114/SC 6 Horology/Precious metal coverings
15 Tokyo (Japan) TC 114/SC 14
Horology/Table and wall clocks
15-16 Tokyo (Japan) TC 22/SC 1 Road vehicles/Ignition equipment
16 Hangzhou (China)
TC 10/SC 1 Technical product documentation/Basic conventions
16 Hangzhou (China)
TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation
16 Berlin (Germany) TC 29/SC 8 Small tools/Tools for pressing and moulding
16 Guangzhou (China)
TC 68 Financial services
16-17 Frankfurt (Germany)
TC 184/SC 5 Automation systems and integration/Inter-operability, integra-tion, and architec-tures for enterprise systems and automa-tion applications
17 Hangzhou (China)
TC 10 Technical product documentation
17 Berlin (Germany) TC 22/SC 10 Road vehicles/Impact test procedures
17 Berlin (Germany) TC 22/SC 12 Road vehicles/Pas-sive safety crash protection systems
17 Berlin (Germany) TC 29 Small tools
17 Burr Ridge (USA) TC 195 Building construc-tion machinery and equipment
19-24 Shenzen (China) TC 130 Graphic technology
20-23 Durban (South Africa)
TC 249 Traditional chinese medicine
21-24 Berlin (Germany) TC 43/SC 3 Acoustics/Underwa-ter acoustics
ISO Update, Supplement to ISO Focus -- April 2013 19
22 Vancouver (Canada)
TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe
22 Stockholm (Sweden)
TC 145/SC 1 Graphical symbols/Public information symbols
22-23 La Valetta (Malta) * COPOLCO Committee on con-sumer policy
23 Stockholm (Sweden)
TC 145/SC 2 Graphical symbols/Safety identification, signs, shapes, sym-bols and colours
23 Stockholm (Sweden)
TC 145/SC 3 Graphical symbols/Graphical symbols for use on equipment
23-25 Moscow (Rus-sian Federation)
* TC 20/SC 8 Aircraft and space vehicles/Aerospace terminology
24 Salzburg (Austria)
TC 89 Wood-based panels
24 Stockholm (Sweden)
TC 145 Graphical symbols
24 Delft (Netherlands)
TC 158 Analysis of gases
25-31 Montreal (Canada)
JTC 1/SC 7 Information technol-ogy/Software and systems engineering
27-31 Moscow (Rus-sian Federation)
* TC 20/SC 14 Aircraft and space ve-hicles/Space systems and operations
27-31 Paris (France) * TC 133 Clothing sizing sys-tems - size designa-tion, size measure-ment methods and digital fittings
27-31 Delft (Netherlands)
TC 223 Societal security
28-31 Helsinki (Finland) TC 257 General technical rules for determina-tion of energy savings in renovation projects, industrial enterprises and regions
29 Bilbao (Spain) TC 147/SC 3 Water qual-ity/Radioactivity measurements
30-31 Busan (Korea, Republic of)
TC 211 Geographic in-formation/Geomatics
31 Shanghai (China) TC 4 Rolling bearings
31 Berlin (Germany) TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining
31 Porto (Portugal) TC 228 Tourism and related services
June 2013
3-5 Berlin (Germany) TC 44/SC 3 Welding and allied processes/Welding consumables
3-5 Paris (France) TC 46/SC 9 Information and documentation/Identification and description
3-6 Milan (Italy) TC 22/SC 13 Road vehicles/Ergo-nomics applicable to road vehicles
3-7 Auburn Hills (USA)
* TC 22/SC 21 Road vehicles/Electri-cally propelled road vehicles
3-7 Rotterdam (Netherlands)
TC 34/SC 5 Food products/Milk and milk products
3-7 McLean, Virginia (USA)
TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
3-7 Copenhagen (Denmark)
TC 42 Photography
3-7 Paris (France) TC 46/SC 11 Information and doc-umentation/Archives/records management
3-7 Milwaukee (USA) ** TC 69 Applications of statis-tical methods
3-7 San Francisco (USA)
* TC 173/SC 1 Assistive products for persons with disability/Wheelchairs
3-8 Warsaw (Poland) TC 96 Cranes
3-8 Paris (France) TC 184/SC 4 Automation systems and integration/Indus-trial data
4-5 Amsterdam (Netherlands)
TC 259 Project committee: Outsourcing
5 Berlin (Germany) TC 29/SC 5 Small tools/Grinding wheels and abrasives
5 Prague (Czech Republic)
** TC 115 Pumps
5-7 Paris (France) ** TC 46/SC 4 Information and documentation/Tech-nical interoperability
6 Lysaker (Norway) TC 8/SC 2 Ships and marine technology/Ma-rine environment protection
6-7 Milan (Italy) * TC 22/SC 17 Road vehicles/Visibility
6-7 Paris (France) TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection
10-13 London (United Kingdom)
* TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements
10-14 Tel Aviv (Israel) * TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
11 Geneva (Switzerland)
* CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)
11 Chantilly (USA) * TC 220 Cryogenic vessels
11-12 Brugge (Belgium) TC 17/SC 17 Steel/Steel wire rod and wire products
11-12 Burr Ridge (USA) TC 23/SC 3 Tractors and machin-ery for agriculture and forestry/Safety and comfort
11-13 Gothenburg (Sweden)
* TC 22 Road vehicles
20 ISO Update, Supplement to ISO Focus -- April 2013
11-14 Sydney (Australia)
REMCO Committee on refer-ence materials
12 Munich (Germany)
* TC 118/SC 4 Compressors and pneumatic tools, machines and equip-ment/Compressed air purity specification and compressed air treatment equipment
12-13 Burr Ridge (USA) TC 23/SC 4 Tractors and machin-ery for agriculture and forestry/Tractors
12-13 Geneva (Switzerland)
* TMB Technical Manage-ment Board
13 Atlanta (USA) TC 85/SC 5 Nuclear energy, nuclear technolo-gies, and radiological protection/Nuclear fuel cycle
13 Berlin (Germany) TC 156 Corrosion of metals and alloys
13-14 Burr Ridge (USA) TC 23 Tractors and machin-ery for agriculture and forestry
13-14 Barcelona (Spain)
TC 91 Surface active agents
14 Pretoria (South Africa)
* TC 37/SC 1 Terminology and other language and content resources/Principles and methods
14 Pretoria (South Africa)
TC 37/SC 2 Terminology and other language and content resources/Terminographical and lexicographical work-ing methods
14 Pretoria (South Africa)
* TC 37/SC 3 Terminology and other language and content resources/Systems to manage terminology, knowl-edge and content
14 Pretoria (South Africa)
* TC 37/SC 4 Terminology and other language and content resources/Language resource management
14 Pretoria (South Africa)
* TC 37/SC 5 Terminology and other language and content resources/Translation, inter-preting and related technology
14 Paris (France) TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
14-15 Atlanta (USA) TC 85/SC 6 Nuclear energy, nuclear technolo-gies, and radiological protection/Reactor technology
17-19 (Europe) ** TC 252 Project committee: Natural gas fuelling stations for vehicles
17-21 Seoul (Korea, Republic of)
JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems
17-21 Bellevue (USA) JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages
17-21 Shanghai (China) TC 121 Anaesthetic and res-piratory equipment
17-21 Berlin (Germany) ** TC 149 Cycles
18-19 Düsseldorf (Germany)
TC 17/SC 4 Steel/Heat treatable and alloy steels
18-19 Louvain-la-Neuve (Belgium)
TC 17/SC 11 Steel/Steel castings
18-19 Courbevoie, Paris (France)
TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers
18-19 (Spain) ** TC 137 Footwear sizing des-ignations and marking systems
19 Porto de Galin-has (Brazil)
TC 135/SC 9 Non-destructive test-ing/Acoustic emission testing
19-20 Prague (Czech Republic)
TC 17/SC 12 Steel/Continuous mill flat rolled products
19-20 London (United Kingdom)
** TC 22/SC 3 Road vehicles/Elec-trical and electronic equipment
24-26 Berlin (Germany) * TC 34/SC 9 Food products/Microbiology
24-26 Calgary (Canada) * TC 253 Project committee: Treated wastewater re-use for irrigation
24-27 Istanbul (Turkey) TC 189 Ceramic tile
24-28 Montreal (Canada)
TC 35 Paints and varnishes
24-28 Moscow (Rus-sian Federation)
* TC 193 Natural gas
24-28 Gaborone (Botswana)
TC 207 Environmental management
25-26 Tokyo (Japan) TC 17/SC 9 Steel/Tinplate and blackplate
26 Montreal (Canada)
* TC 35/SC 14 Paints and varnishes/Protective paint systems for steel structures
26-27 Paris (France) TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding
27 Montreal (Canada)
* TC 35/SC 9 Paints and varnishes/General test meth-ods for paints and varnishes
27-28 Tokyo (Japan) TC 67/SC 6 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Processing equip-ment and systems
28 Stockholm (Sweden)
TC 51 Pallets for unit load method of materials handling
28 Espoo (Helsinki) (Finland)
TC 188 Small craft
ISO Update, Supplement to ISO Focus -- April 2013 21
Washington, D.C (USA)
** TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements
July 2013
1-5 Bornholm (Denmark)
TC 268 Sustainable develop-ment in communities
2 Berlin (Germany) TC 274 Light and lighting
2-4 Bornholm (Denmark)
** TC 268/SC 1 Sustainable develop-ment in communities/Smart community infrastructures
15-17 Vienna (Austria) PC 273 Customer contact centres
15-19 Paris (France) * JTC 2 Joint Project Commit-tee - Energy efficiency and renewable energy sources - Common terminology
Notting-ham (United Kingdom)
** TC 261 Additive manufacturing
August 2013
12-15 Moscow (Rus-sian Federation)
* TC 20/SC 10 Aircraft and space vehicles/Aerospace fluid systems and components
21-23 (USA) ** TC 134 Fertilizers and soil conditioners
26-30 (Canada) ** JTC 1/SC 35 Information technol-ogy/User interfaces
September 2013
3-6 Hangzhou (China)
* TC 172/SC 5 Optics and photon-ics/Microscopes and endoscopes
8-9 Victoria (Canada) * TC 33 Refractories
8-13 Moscow (Rus-sian Federation)
* JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
8-13 Suzhou (China) TC 61 Plastics
9-10 London (United Kingdom)
* TC 21/SC 8 Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas
9-10 Paris (France) * TC 26 Copper and copper alloys
9-11 Gaithersburg (USA)
** TC 172/SC 9 Optics and photon-ics/Electro-optical systems
9-13 Delft (Netherlands)
* JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages
9-13 Montreal (Canada)
** TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to me-chanical vibration and shock
9-14 Stockholm (Sweden)
* TC 163 Thermal performance and energy use in the built environment
10 London (United Kingdom)
* TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems using foam and powder
10 Paris (France) * TC 79/SC 11 Light metals and their alloys/Titanium
10-13 Vienna (Austria) ** TC 146/SC 6 Air quality/Indoor air
11 London (United Kingdom)
TC 21/SC 3 Equipment for fire protection and fire fighting/Fire detection and alarm systems
11 London (United Kingdom)
* TC 21/SC 11 Equipment for fire protection and fire fighting/Smoke and heat control systems and components
11 Suzhou (China) * TC 61/SC 1 Plastics/Terminology
11 Suzhou (China) * TC 61/SC 2 Plastics/Mechanical properties
11 Suzhou (China) * TC 61/SC 4 Plastics/Burning behaviour
11 Suzhou (China) * TC 61/SC 5 Plastics/Physical-chemical properties
11 Suzhou (China) * TC 61/SC 10 Plastics/Cellular plastics
11 Suzhou (China) * TC 61/SC 11 Plastics/Products
11 Suzhou (China) * TC 61/SC 12 Plastics/Thermoset-ting materials
11 Paris (France) * TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium
11-12 Stockholm (Sweden)
* TC 119/SC 3 Powder metallurgy/Sampling and testing methods for sintered metal materials (ex-cluding hardmetals)
12 London (United Kingdom)
* TC 21/SC 2 Equipment for fire protection and fire fighting/Manu-ally transportable fire extinguishers
12 Suzhou (China) * TC 61/SC 6 Plastics/Ageing, chemical and environ-mental resistance
12 Suzhou (China) * TC 61/SC 9 Plastics/Thermoplas-tic materials
12 Suzhou (China) * TC 61/SC 13 Plastics/Composites and reinforcement fibres
12 Paris (France) ** TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium
12 Paris (France) ** TC 79/SC 6 Light metals and their alloys/Wrought aluminium and alu-minium alloys
12 Stockholm (Sweden)
* TC 119/SC 2 Powder metallurgy/Sampling and testing methods for powders (including powders for hardmetals)
22 ISO Update, Supplement to ISO Focus -- April 2013
12 Stockholm (Sweden)
* TC 119/SC 4 Powder metallurgy/Sampling and test-ing methods for hardmetals
13 London (United Kingdom)
* TC 21 Equipment for fire protection and fire fighting
13 Paris (France) ** TC 79 Light metals and their alloys
13 Stockholm (Sweden)
TC 119 Powder metallurgy
13 Stockholm (Sweden)
* TC 119/SC 5 Powder metallurgy/Specifications for powder metallurgical materials (excluding hardmetals)
13 Frankfurt (Germany)
** TC 244 Industrial furnaces and associated pro-cessing equipment
15-20 Velsen (Netherlands)
TC 164 Mechanical testing of metals
16-17 St. Peters-burg (Russian Federation)
* DEVCO Committee on developing countries matters
16-17 St. Peters-burg (Russian Federation)
* TMB Technical Manage-ment Board
16-20 Copenhagen (Denmark)
* TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures
16-20 London (United Kingdom)
* TC 150 Implants for surgery
16-20 Fukuoka (Japan) * TC 190 Soil quality
16-20 Fukuoka (Japan) * TC 190/SC 1 Soil quality/Evaluation of criteria, terminol-ogy and codification
16-20 Fukuoka (Japan) * TC 190/SC 2 Soil quality/Sampling
16-20 Fukuoka (Japan) * TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics
16-20 Fukuoka (Japan) * TC 190/SC 4 Soil quality/Biological methods
16-20 Fukuoka (Japan) * TC 190/SC 7 Soil quality/Soil and site assessment
17 Paris (France) * TC 254 Safety of amusement rides and amusement devices
17-18 Belo Horizonte (Brazil)
** TC 155 Nickel and nickel alloys
17-19 Tokyo (Japan) * JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
17-19 Chengdu (China) * TC 256 Pigments, dyestuffs and extenders
18-20 St. Peters-burg (Russian Federation)
* GA General Assembly
19 Atlanta (USA) * TC 142 Cleaning equipment for air and other gases
19-20 Graz (Austria) * TC 172/SC 6 Optics and photonics/Geodetic and survey-ing instruments
21 St. Peters-burg (Russian Federation)
* COUNCIL Council
23-26 (Canada) ** TC 153/SC 1 Valves/Design, manu-facture, marking and testing
23-27 Kobe (Japan) * JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)
23-27 Milan (Italy) ** TC 120 Leather
23-27 Vienna (Austria) * TC 218 Timber
25-26 Oslo (Norway) * TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries
26-27 Toulouse (France)
* TC 264 Fireworks
27 Seoul (Korea, Republic of)
** TC 44/SC 12 Welding and allied processes/Soldering materials
27 (Canada) ** TC 153/SC 1 Valves/Design, manu-facture, marking and testing
27 Helsinki (Finland) * TC 213 Dimensional and geometrical product specifications and verification
St. Peters-burg (Russian Federation)
** CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
London (United Kingdom)
** TC 21/SC 5 Equipment for fire protection and fire fighting/Fixed firefighting systems using water
13 Paris (France) ** TC 79/SC 4 Light metals and their alloys/Unalloyed (refined) aluminium ingots
13 Paris (France) ** TC 79/SC 7 Light metals and their alloys/Aluminium and cast aluminium alloys
13 Paris (France) ** TC 79/SC 9 Light metals and their alloys/Symbolization
(Germany) ** TC 180 Solar energy
Tokyo (Japan) ** TC 267 Facilities management
September-October 2013
30-4 (Sweden) ** JTC 1/SC 25 Information technolo-gy/Interconnection of information technol-ogy equipment
October 2013
2-3 Tampere (Finland)
TC 23/SC 15 Tractors and machin-ery for agriculture and forestry/Machinery for forestry
3-4 Chantilly (USA) * TC 58/SC 2 Gas cylinders/Cylin-der fittings
7 Istanbul (Turkey) * TC 38/SC 1 Textiles/Tests for coloured textiles and colorants
7-8 Milan (Italy) ** TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes
ISO Update, Supplement to ISO Focus -- April 2013 23
7-9 Tokyo (Japan) * TC 70 Internal combustion engines
7-9 Tokyo (Japan) * TC 70/SC 8 Internal combus-tion engines/Ex-haust gas emission measurement
7-9 Istanbul (Turkey) ** TC 126 Tobacco and tobacco products
7-11 Beijing (China) * CASCO Committee on con-formity assessment
7-11 Istanbul (Turkey) * TC 38 Textiles
7-11 Oslo (Norway) * TC 138 Plastics pipes, fittings and valves for the transport of fluids
8 Istanbul (Turkey) * TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests
9 London (United Kingdom)
* TC 8/SC 7 Ships and marine technology/Inland navigation vessels
9 Istanbul (Turkey) * TC 38/SC 23 Textiles/Fibres and yarns
9-10 Seogwipo-si (Korea, Repub-lic of)
** TC 159 Ergonomics
10 Istanbul (Turkey) * TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics
11 Garching (Germany)
** TC 60 Gears
11 Garching (Germany)
** TC 60/SC 1 Gears/Nomenclature and wormgearing
11 Garching (Germany)
** TC 60/SC 2 Gears/Gear capacity calculation
14-15 Miami (USA) ** TC 44/SC 3 Welding and allied processes/Welding consumables
14-17 Stuttgart (Germany)
TC 165 Timber structures
14-18 Paris (France) * TC 2 Fasteners
14-18 Seoul (Korea, Republic of)
* TC 108 Mechanical vibration, shock and condition monitoring
16-18 Munich (Germany)
* TC 58/SC 3 Gas cylinders/Cylin-der design
16-18 (Korea, Repub-lic of)
** TC 123 Plain bearings
16-18 (Korea, Repub-lic of)
** TC 123/SC 2 Plain bearings/Materi-als and lubricants, their properties, characteristics, test methods and testing conditions
16-18 (Korea, Repub-lic of)
** TC 123/SC 3 Plain bearings/Dimen-sions, tolerances and construction details
16-18 (Korea, Repub-lic of)
** TC 123/SC 5 Plain bearings/Quality analysis and assurance
16-18 (Korea, Repub-lic of)
** TC 123/SC 6 Plain bearings/Terms and common items
16-18 (Korea, Repub-lic of)
** TC 123/SC 7 Plain bearings/Spe-cial types of plain bearings
17-18 (South Africa) ** TC 44 Welding and allied processes
18 Berlin (Germany) * TC 22/SC 7 Road vehicles/Injec-tion equipment and filters for use on road vehicles
21-25 (Europe) * TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
21-25 Sao Paulo (Brazil)
* TC 181 Safety of toys
21-25 Sydney (Australia)
* TC 215 Health informatics
21-26 Berlin (Germany) * TC 147 Water quality
22-25 Tokyo (Japan) * TC 146/SC 1 Air quality/Stationary source emissions
23 Paris (France) * TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete
23 Tokyo (Japan) ** TC 206 Fine ceramics
24-25 Sarajevo (Bosnia and Herzegovina)
** TC 34/SC 12 Food products/Sen-sory analysis
24-25 Berlin (Germany) TC 173 Assistive products for persons with disability
28-31 Bali (Indonesia) * TC 45/SC 1 Rubber and rubber products/Hoses (rub-ber and plastics)
31 Bali (Indonesia) * TC 45/SC 2 Rubber and rubber products/Testing and analysis
31 Bali (Indonesia) TC 45/SC 4 Rubber and rubber products/Products (other than hoses)
Berlin (Germany) ** TC 34/SC 15 Food products/Coffee
(South Africa) ** TC 44/SC 9 Welding and allied processes/Health and safety
(France) ** TC 111 Round steel link chains, chain slings, components and accessories
(France) ** TC 111/SC 1 Round steel link chains, chain slings, components and ac-cessories/Chains and chain slings
Berlin (Germany) ** TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments
Beijing (China) ** TC 184/SC 2 Automation systems and integration/Robots and robotic devices
Boulder (USA) ** TC 202 Microbeam analysis
Carson City (USA)
** TC 209 Cleanrooms and as-sociated controlled environments
October-December 2013
7-11 Oslo (Norway) * TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (includ-ing land drainage)
October-November 2013
28-1 Bali (Indonesia) TC 45 Rubber and rubber products
24 ISO Update, Supplement to ISO Focus -- April 2013
November 2013
1 Bali (Indonesia) * TC 45/SC 3 Rubber and rubber products/Raw materi-als (including latex) for use in the rubber industry
4-8 Sydney (Australia)
* TC 34/SC 17 Food products/Man-agement systems for food safety
4-8 Shenzen (China) * TC 160 Glass in building
4-9 Perros-Guirec (France)
** JTC 1 Information technology
6-9 Washington, D.C (USA)
* TC 227 Springs
7-9 Okinawa (Japan) ** TC 201 Surface chemical analysis
8 Paris (France) * TC 92/SC 1 Fire safety/Fire initia-tion and growth
10-15 Mexico (Mexico) * TC 113 Hydrometry
11-15 Tokyo (Japan) * TC 98 Bases for design of structures
13 Tokyo (Japan) ** TC 110/SC 1 Industrial trucks/Gen-eral terminology
14 Tokyo (Japan) ** TC 110/SC 2 Industrial trucks/Safety of powered industrial trucks
14-15 Redlands (USA) * TC 211 Geographic in-formation/Geomatics
15 Tokyo (Japan) ** TC 110 Industrial trucks
19-21 Singapore (Singapore)
* TC 212 Clinical laboratory testing and in vitro di-agnostic test systems
20-22 Tokyo (Japan) * TC 269 Railway applications
30 Berlin (Germany) ** TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining
Berlin (Germany) ** TC 41 Pulleys and belts (including veebelts)
4th Quarter 2013
New Delhi (India) ** TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems
(Europe) ** TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization
London (United Kingdom)
** TC 59/SC 2 Buildings and civil engineering works/Terminology and harmonization of languages
(Korea, Repub-lic of)
** TC 106 Dentistry
Paris (France) ** TC 275 Sludge recovery, recycling, treatment and disposal
Month unknown 2013
(South Africa) ** TC 27 Solid mineral fuels
(Unknown) ** TC 38/SC 1 Textiles/Tests for coloured textiles and colorants
Bratislava (Slovakia)
** TC 44/SC 11 Welding and allied processes/Qualifica-tion requirements for welding and allied processes personnel
(Unknown) ** TC 173/SC 2 Assistive products for persons with disabil-ity/Classification and terminology
(Sweden) ** TC 205 Building environment design
February 2014
10-14 Paris (France) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders
(South America) ** JTC 1/SC 35 Information technol-ogy/User interfaces
Delft (Netherlands)
** TC 6/SC 2 Paper, board and pulps/Test methods and quality specifica-tions for paper and board
(Sweden) ** TC 213 Dimensional and geometrical product specifications and verification
March 2014
13 London (United Kingdom)
* TC 118/SC 1 Compressors and pneumatic tools, machines and equipment/Process compressors
13 London (United Kingdom)
* TC 118/SC 3 Compressors and pneumatic tools, machines and equip-ment/Pneumatic tools and machines
13 London (United Kingdom)
* TC 118/SC 4 Compressors and pneumatic tools, machines and equip-ment/Compressed air purity specification and compressed air treatment equipment
13 London (United Kingdom)
* TC 118/SC 6 Compressors and pneumatic tools, machines and equip-ment/Air compressors and compressed air systems
14 London (United Kingdom)
TC 118 Compressors and pneumatic tools, ma-chines and equipment
23-27 Warsaw (Poland) * TC 107 Metallic and other inorganic coatings
23-27 Warsaw (Poland) * TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
23-27 Warsaw (Poland) * TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
23-27 Warsaw (Poland) * TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests
23-27 Warsaw (Poland) * TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings
ISO Update, Supplement to ISO Focus -- April 2013 25
27-28 Geneva (Switzerland)
* COUNCIL Council
April 2014
7-11 Bologna (Italy) * TC 110/SC 4 Industrial trucks/Rough-terrain trucks
8-9 (Japan) ** TC 199 Safety of machinery
14-15 Hong Kong (Hong Kong, China)
* JTC 1/SC 27 Information tech-nology/IT Security techniques
Berlin (Germany) ** TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals
Berlin (Germany) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils
(Brazil) ** TC 102 Iron ore and direct reduced iron
May 2014
9-16 London (United Kingdom)
** TC 10 Technical product documentation
12-16 London (United Kingdom)
** TC 68/SC 4 Financial services/Securities and related financial instruments
15 London (United Kingdom)
* TC 68 Financial services
19-23 Berlin (Germany) ** TC 43 Acoustics
19-23 Berlin (Germany) ** TC 43/SC 1 Acoustics/Noise
19-24 Karuizawa (Japan)
** TC 215 Health informatics
Beijing (China) ** TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization
Washington, D.C (USA)
** TC 46/SC 11 Information and doc-umentation/Archives/records management
June 2014
1-6 (Sweden) ** TC 127 Earth-moving machinery
5-6 Berlin (Germany) * TC 211 Geographic in-formation/Geomatics
September 2014
8-9 Madrid (Spain) * JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
10-12 Rio de Janeiro (Brazil)
* GA General Assembly
13 Rio de Janeiro (Brazil)
* COUNCIL Council
(South Africa) ** TC 178 Lifts, escalators and moving walks
Montreal (Canada)
** TC 213 Dimensional and geometrical product specifications and verification
October 2014
5-10 Berlin (Germany) ** TC 215 Health informatics
Prague (Czech Republic)
** TC 135 Non-destructive testing
November 2014
3-7 Cape Town (South Africa)
** TC 45 Rubber and rubber products
4th Quarter 2014
(South Africa) ** TC 146 Air quality
Month unknown 2014
(USA) ** REMCO Committee on refer-ence materials
(Australia) ** TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition
(Brazil) ** TC 28 Petroleum products and lubricants
Beijing (China) ** TC 36 Cinematography
(Germany) ** TC 37 Terminology and other language and content resources
(Japan) ** TC 44 Welding and allied processes
(United Kingdom)
** TC 142 Cleaning equipment for air and other gases
Suzhou (China) ** TC 164 Mechanical testing of metals
(Germany) ** TC 190 Soil quality
February 2015
London (United Kingdom)
** TC 213 Dimensional and geometrical product specifications and verification
1st Quarter 2015
Foshan (China) ** TC 107 Metallic and other inorganic coatings
Foshan (China) ** TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
Foshan (China) ** TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
Foshan (China) ** TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests
Foshan (China) ** TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings
April 2015
(Europe) ** TC 215 Health informatics
2nd Quarter 2015
(China) ** TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments
3rd Quarter 2015
Sao Paulo (Brazil)
** TC 215 Health informatics
November 2015
(China) ** JTC 1 Information technology
Month unknown 2015
(South Africa) ** REMCO Committee on refer-ence materials
(Finland) ** TC 44 Welding and allied processes
(France) ** TC 45 Rubber and rubber products
26 ISO Update, Supplement to ISO Focus -- April 2013
(Japan) ** TC 142 Cleaning equipment for air and other gases
(China) ** TC 155 Nickel and nickel alloys
(United Kingdom)
** TC 164 Mechanical testing of metals
(Austria) ** TC 190 Soil quality
November 2016
(Norway) ** JTC 1 Information technology
Month unknown 2016
(Russian Federation)
** REMCO Committee on refer-ence materials
(Australia) ** TC 44 Welding and allied processes