ISO Update - sutn.sk · ISO Update, Supplement to ISO Focus -- September 2013 1 International...
Transcript of ISO Update - sutn.sk · ISO Update, Supplement to ISO Focus -- September 2013 1 International...
ISO Update
Supplement to ISO Focus+
September 2013
ISO Update, Supplement to ISO Focus -- September 2013 1
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 August to 31 August 2013
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 4 Rolling bearings
ISO/CD 104 Rolling bearings — Thrust bearings — Bound-ary dimensions, general plan
TC 8 Ships and marine technology
ISO/CD 29400 Ships and marine technology — Offshore wind energy — Ports and marine operations
TC 10 Technical product documentation
ISO/CD 13715 Technical drawings — Edges of undefined shape — Vocabulary and indications
ISO/CD 81346-12
Industrial systems, installations and equip-ment and industrial products — Structuring principles and reference designations — Part 12: Buildings and building services
TC 17 Steel
ISO/CD 22034-2
Steel wire and wire products — Part 2: Toler-ances on wire dimensions
TC 20 Aircraft and space vehicles
ISO/CD 2100 Aircraft — Electrical connectors — Tests
ISO/CD 6858 Aircraft — Ground support electrical supplies — General requirements
ISO/CD 15699 Aerospace vehicle interconnection installation practices
ISO/CD 17689 Space systems — Interface control documents between ground technological equipment, launch site systems and launch vehicle with payload
TC 21 Equipment for fire protection and fire fighting
ISO/CD 7240-8 Fire detection and alarm systems — Part 8: Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor
TC 22 Road vehicles
ISO/CD 17536-2
Road vehicles — Aerosol separator perfor-mance test for internal combustion engines — Part 2: Laboratory gravimetric test method
ISO/DTS 17536-3
Road vehicles — Aerosol separator perfor-mance test for internal combustion engines — Part 3: Engine gravimetric test method
ISO/DTS 13499
Road vehicles — Multimedia data exchange format for impact tests
ISO/DTS 17242
Quasi-static Calibration Procedure for Belt Force Transducers
TC 23 Tractors and machinery for agriculture and forestry
ISO/CD 17989-1
Tractors and machinery for agriculture and forestry — Sustainability — Part 1: Principles
ISO/CD 4254-7 Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters and cotton harvesters
TC 28 Petroleum products and lubricants
ISO/CD 20844 Petroleum products and lubricants — De-termination of the shear stability of polymer-containing oils using a diesel injector nozzle — Complementary element
ISO/CD 26422 Petroleum and related products — Determina-tion of shear stability of lubricating oils contain-ing polymers — Method using a tapered roller bearing
TC 34 Food products
ISO/CD 19046-1
Cheese — Determination of propionic acid by chromatography — Part 1: Reference method
ISO/CD 19046-2
Cheese — Determination of propionic acid by chromatography — Part 2: Routine method
TC 35 Paints and varnishes
ISO/CD 3668 Paints and varnishes — Visual comparison of the colour of paints
ISO/CD 8502-3 Preparation of steel substrates before applica-tion of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
ISO/CD 8502-4 Preparation of steel substrates before applica-tion of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application
ISO/CD 8502-9 Preparation of steel substrates before applica-tion of paints and related products — Tests for the assessment of surface cleanliness — Part 9: Field method for the conductometric deter-mination of water-soluble salts
TC 38 Textiles
ISO/CD 137 Wool — Determination of fibre diameter — Projection microscope method
ISO/CD 1136 Wool — Determination of mean diameter of fibres — Air permeability method
TC 43 Acoustics
ISO/CD 1996-2 Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of environmental noise levels
ISO 3745:2012/CD Amd 1
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms — Amendment 1
2 ISO Update, Supplement to ISO Focus -- September 2013
ISO/CD 17534-1
Acoustics — Software for the calculation of sound outdoors — Part 1: Quality requirements and quality assurance
ISO/DTR 17534-2
Acoustics — Software for the calculation of sound outdoors — Part 2: General recommen-dations for test cases and quality assurance interface
TC 45 Rubber and rubber products
ISO/DTS 22762-4
Elastomeric seismic-protection isolators — Part 4: Guidance on the application of ISO 22762-3
TC 92 Fire safety
ISO/DTR 17755
Fire Safety — Statistical data
TC 108 Mechanical vibration, shock and condi-tion monitoring
ISO/CD 16063-32
Methods for the calibration of vibration and shock transducers — Part 32: Resonance testing — Testing the frequency and the phase response of accelerometers by means of shock excitation
ISO/CD 16063-33
Methods for the calibration of vibration and shock transducers — Part 33: Testing of mag-netic field sensitivity
TC 113 Hydrometry
ISO/DTR 9212 Hydrometry — Methods of measurement of bedload discharge
TC 131 Fluid power systems
ISO/CD 1219-3 Fluid power systems and components — Graphical symbols and circuit diagrams — Part 3: Symbol modules and connected symbols in circuit diagrams
ISO/CD 8434-1 Metallic tube connections for fluid power and general use — Part 1: 24 degree cone connectors
ISO/CD 8434-2 Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
ISO/CD 8434-6 Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connec-tors with or without O-ring
TC 133 Clothing sizing systems - size designa-tion, size measurement methods and digital fittings
ISO/CD 18825-1
Clothing — Digital fittings — Part 1: Vocabulary and terminology used for the virtual human body
ISO/CD 18825-2
Clothing — Digital fittings — -- Part 2: Vo-cabulary and terminology used for virtual body dimensions of the virtual human body
ISO/CD 18825-3
Clothing — Digital fittings — Part 3: Vocabulary and terminology used for virtual bones and joints of the virtual human body
ISO/CD 18825-4
Clothing — Digital fittings — Part 4: Vocabulary and terminology used for the virtual torso, arms and legs of the virtual human body
ISO/CD 18825-5
Clothing — Digital fittings — Part 5: Vocabulary and terminology used for the virtual head and face of the virtual human body
ISO/CD 18825-6
Clothing — Digital fittings — Part 6: Vocabulary and terminology used for the virtual hand of the virtual human body
ISO/CD 18825-7
Clothing — Digital fittings — Part 7: Vocabulary and terminology used for the virtual foot of the virtual human body
ISO/CD 18831 Clothing — Digital fittings — Attributes of virtual garments
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/CD 16611 Plastics piping systems for drainage and sew-erage without pressure — Non-circular pipes and joints made of glass-reinforced thermo-setting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, require-ments and tests
ISO/DTS 18853
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Guidance for the assessment of conformity
TC 146 Air quality
ISO/CD 12219-6
Interior air of road vehicles — Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials — Small chamber method
TC 160 Glass in building
ISO/CD 18178 Glass in building — Laminated solar PV glass
TC 164 Mechanical testing of metals
ISO/CD 148-1 Metallic materials — Charpy pendulum impact test — Part 1: Test method
ISO/CD 148-2 Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
ISO/CD 148-3 Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characteriza-tion of Charpy V-notch test pieces for indirect verification of pendulum impact machines
ISO/CD 14556 Steel — Charpy V-notch pendulum impact test — Instrumented test method
TC 171 Document management applications
ISO/CD 18160 Document management — Digital preservation — Analog recording to silvergelatin microform
TC 180 Solar energy
ISO/CD 22975-1
Solar Energy — Collector components and ma-terials — Part 1: Evacuated tubes — Durability and performance
ISO/CD 22975-2
Solar Energy — Collector components and materials — Part 2: Heat-pipe for evacuated tubes — Durability and performance
TC 193 Natural gas
ISO/CD 6976 Natural gas — Calculation of calorific values, density, relative density and Wobbe index from composition
TC 201 Surface chemical analysis
ISO/CD 18337 Surface chemical analysis — Measurement of lateral resolution of confocal fluorescence microscope
TC 206 Fine ceramics
ISO/CD 15733 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for tensile stress-strain behaviour of continuous, fibre- reinforced composites at room temperature
ISO/CD 17942 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of boron nitride powders
ISO/CD 17947 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of fine silicon nitride powders
TC 210 Quality management and correspond-ing general aspects for medical devices
ISO Update, Supplement to ISO Focus -- September 2013 3
ISO/CD 16142-1
Medical devices — Recognized essential prin-ciples of safety and performance of medical devices — Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards
TC 215 Health informatics
ISO/DTS 17439
Health informatics — Development of terms and definitions for health informatics and glossaries
ISO/CD 21549-5
Health informatics — Patient healthcard data — Part 5: Identification data
TC 229 Nanotechnologies
ISO/DTR 16197
Nanotechnologies - Guidance on toxico-logical screening methods for manufactured nanomaterials
JTC 1 Information technology
ISO/IEC CD 15026-3
Systems and software engineering — Systems and software assurance — Part 3: System integrity levels
ISO/IEC/IEEE CD 15288
Systems and software engineering — System life cycle processes
ISO/IEC CD 25066
Systems and software engineering — Systems and software Quality Requirements and Evalu-ation (SQuaRE) — Common industry Format for Usability — Evaluation Report
ISO/IEC CD 29110-1
Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 1: Overview
ISO/IEC CD 29110-2
Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 2: Framework and taxonomy
ISO/IEC CD 29110-3-1
Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 3-1: Capabil-ity assessment guide
ISO/IEC CD 29110-3-2
Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 3-2: Con-formity Audit Guide
ISO/IEC 18013-3:2009/PDAM 3
Information technology — Personal identifica-tion — ISO-compliant driving licence — Part 3: Access control, authentication and integrity validation — Amendment 3: PACE
ISO/IEC CD 17825
esting methods for the mitigation of non-invasive attack classes against cryptographic modules
ISO/IEC CD 24711
Method for the determination of ink cartridge yield for colour inkjet printers and multi-func-tion devices that contain printer components
ISO/IEC CD 29102
Information technology — Office equipment — Method for the determination of ink cartridge photo yield for colour printing with inkjet printers and multi-function devices that contain inkjet printer components
ISO/IEC CD 29167-13
Information technology — Automatic identifica-tion and data capture techniques — Part 13: Air Interface for security services crypto suite Grain-128A
ISO/IEC 19794-6:2011/PDAM 2
Information technology — Biometric data interchange formats — Part 6: Iris image data — Amendment 2: XML Encoding
DIS circulated
Period from 01 August to 31 August 2013
These documents have obtained substantial support within the ap-propriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 6 Paper, board and pulps
ISO/DIS 5630-7
* Paper and board — Accelerated ageing — Part 7: Exposure to light
2013-11-24
ISO/DIS 12625-15
* Tissue paper and tissue prod-ucts — Part 15: Determination of optical properties — Meas-urement of brightness and colour with C/2° (indoor daylight) illuminant
2014-01-30
ISO/DIS 12625-16
* Tissue paper and tissue prod-ucts — Part 16: Determination of optical properties — Opacity (paper backing) — Diffuse reflec-tance method
2014-01-30
TC 8 Ships and marine technology
ISO/DIS 17325-1
* Ships and marine technology — Marine environment protection — Oil booms — Part 1: Design requirements
2013-11-26
TC 17 Steel
ISO/DIS 630-5 * Structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
2013-11-09
(Revision of ISO 4952:2006)
ISO/DIS 630-6 * Structural steels — Part 6: Technical delivery conditions for seismic improved structural steels for building
2013-11-09
(Revision of ISO 24314:2006)
ISO/DIS 4998 * Continuous hot-dip zinc-coated carbon steel sheet of structural quality
2013-11-06
(Revision of ISO 4998:2011)
ISO/DIS 4999 * Continuous hot-dip terne (lead alloy) coated cold-reduced car-bon steel sheet of commercial, drawing and structural qualities
2013-11-06
(Revision of ISO 4999:2011)
ISO/DIS 5954 * Cold-reduced carbon steel sheet according to hardness requirements
2013-11-06
(Revision of ISO 5954:2007)
ISO/DIS 6932 * Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
2013-11-06
(Revision of ISO 6932:2008)
TC 20 Aircraft and space vehicles
ISO/DIS 16457 * Space systems — Space envi-ronment (natural and artificial) — The Earth's ionosphere model: international reference iono-sphere (IRI) model and exten-sions to the plasmasphere
2013-11-26
(Revision of ISO/TS 16457:2009)
4 ISO Update, Supplement to ISO Focus -- September 2013
ISO/DIS 16709 * Realtime solar activity and space environment information for spacecraft operation
2013-11-29
TC 22 Road vehicles
ISO/DIS 17447-1
* Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 1: Basic characteristics and dimen-sions for metal-sheath-type glow-plugs
2013-11-13
(Revision of ISO 6550-1:1994, ISO 6550-2:1994, ISO 6550-3:2009, ISO 7578:2008, ISO 6550-4:2009, ISO/NP 17447)
ISO/DIS 17447-2
* Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 2: Basic characteristics and dimen-sions for ceramic-sheath-type glow-plugs
2013-11-13
(Revision of ISO 6550-1:1994, ISO 6550-2:1994, ISO 6550-3:2009, ISO 7578:2008, ISO 6550-4:2009, ISO/NP 17447)
ISO/DIS 17447-3
* Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 3: Tests and requirements
2013-11-13
TC 24 Particle characterization including sieving
ISO/DIS 17867 * Particle size analysis — Small-angle X-ray scattering
2013-11-13
TC 28 Petroleum products and lubricants
ISO/DIS 3679 * Determination of flash no-flash and flash point — Rapid equilib-rium closed cup method
2014-01-23
(Revision of ISO 3679:2004, ISO 3680:2004)
TC 29 Small tools
ISO/DIS 12164-3
* Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools
2013-11-29
(Revision of ISO 12164-3:2008)
ISO/DIS 12164-4
* Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools
2013-11-29
(Revision of ISO 12164-4:2008)
TC 34 Food products
ISO/DIS 22004 * Food safety management systems — Guidance on the ap-plication of ISO 22000
2013-11-20
(Revision of ISO/TS 22004:2005)
TC 38 Textiles
ISO/DIS 17617 * Textiles — Determination of moisture drying rate
2013-11-23
TC 43 Acoustics
ISO 3743-2:1994/DAmd 1
* Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms — Amendment 1
2014-01-09
TC 44 Welding and allied processes
ISO/DIS 13469 * Mechanical joining — Form-fit blind rivets and (lock) bolt joints — Specifications and qualifica-tion of testing procedures
2013-11-24
ISO 2503:2009/DAmd 1
* Gas welding equipment — Pres-sure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) — Amendment 1
2014-01-09
ISO 5172:2006/DAmd 2
* Gas welding equipment — Blow-pipes for gas welding, heating and cutting — Specifications and tests — Amendment 2
2014-01-09
ISO 5175:1987/DAmd 1
* Equipment used in gas welding, cutting and allied processes — Safety devices for fuel gases and oxygen or compressed air — General specifications, require-ments and tests — Amendment 1
2013-11-09
ISO 7291:2010/DAmd 1
* Gas welding equipment — Pres-sure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) — Amendment 1
2014-01-09
TC 45 Rubber and rubber products
ISO/DIS 16301.2
Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic jacks and for hydraulic power units used in hydraulic tools — Specification
2013-10-06
ISO 2440:1997/DAmd 2
* Flexible and rigid cellular poly-meric materials — Accelerated ageing tests — Amendment 2
2014-01-23
TC 59 Buildings and civil engi-neering works
ISO/DIS 16745 * Environmental performance of buildings — Carbon Metric of a building — Use stage
2013-11-14
TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries
ISO/DIS 16961 * Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel stor-age tanks
2014-01-23
ISO/DIS 15551-1
Petroleum and natural gas indus-tries — Drilling ans production equipment — Part 1: Electric submersible pump systems for artificial lift
2014-01-30
ISO Update, Supplement to ISO Focus -- September 2013 5
ISO/DIS 19901-1
* Petroleum and natural gas indus-tries — Specific requirements for offshore structures — Part 1: Metocean design and operating considerations
2014-01-23
(Revision of ISO 19901-1:2005)
TC 85 Nuclear energy, nuclear technologies, and radio-logical protection
ISO/DIS 17099 * Radiation Protection — Perfor-mance criteria for laboratories using the cytokinesis-blocked micronucleus assay in blood lymphocytes for biological dosimetry
2013-11-26
ISO/DIS 18589-3
* Measurement of radioactivity in the environment — Soil — Part 3: Measurement of gamma-emitting radionuclides
2013-11-29
(Revision of ISO 18589-3:2007)
TC 87 Cork
ISO/DIS 20752 * Cork stoppers — Determination of releasable 2, 4, 6-trichloroani-sol (TCA)
2013-11-06
(Revision of ISO 20752:2007)
TC 106 Dentistry
ISO/DIS 6872 * Dentistry — Ceramic materials
2014-01-30
(Revision of ISO 6872:2008)
TC 107 Metallic and other inorgan-ic coatings
ISO/DIS 4528 * Vitreous and porcelain enamel finishes — Guide to selection of test methods for vitreous and porcelain enamelled areas of articles
2014-01-30
(Revision of ISO 4528:2000)
TC 121 Anaesthetic and respiratory equipment
ISO/DIS 80601-2-72
* Medical electrical equipment — Part 2-72: Particular require-ments for basic safety and essential performance of home healthcare environment ventila-tors for ventilator-dependent patients
2014-01-23
(Revision of ISO 10651-2:2004)
TC 131 Fluid power systems
ISO/DIS 10766 * Hydraulic fluid power — Cylin-ders — Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
2013-11-29
(Revision of ISO 10766:2006)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/DIS 3458 * Plastics piping systems — Me-chanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure
2014-01-23
(Revision of ISO 3458:1976)
ISO/DIS 3501 * Plastics piping systems — Me-chanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force
2014-01-23
(Revision of ISO 3501:1976)
ISO/DIS 3503 * Plastics piping systems — Me-chanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure of assemblies subjected to bending
2014-01-23
(Revision of ISO 3503:1976)
ISO/DIS 13844 * Plastics piping systems — Elas-tomeric-sealing-ring-type socket joints for use with plastic pipes — Test method for leaktightness under negative pressure, angular deflection and deformation
2014-01-23
(Revision of ISO 13844:2000)
ISO/DIS 13845 * Plastics piping systems — Elas-tomeric-sealing-ring-type socket joints for use with thermoplastic pipes — Test method for leak-tightness under internal pressure and with angular deflection
2014-01-23
(Revision of ISO 13845:2000)
TC 150 Implants for surgery
ISO/DIS 16061 * Instrumentation for use in association with non-active surgical implants — General requirements
2014-01-23
(Revision of ISO 16061:2008)
TC 171 Document management applications
ISO/DIS 24517-2
* Document management — Engi-neering document format using PDF — Part 2: Use of 32000-2 including support for long-term preservation (PDF/E-2)
2013-11-22
TC 173 Assistive products for per-sons with disability
ISO/DIS 17069 * Accessible design — Considera-tion and assistive products for accessible meeting
2013-11-06
TC 182 Geotechnics
ISO/DIS 18674 * Geotechnical investigation and testing — Geotechnical monitor-ing by field instrumentation — General rules
2014-01-09
TC 184 Automation systems and integration
ISO/DIS 22400-1
* Automation systems and integration — Key performance indicators (KPIs) for manufactur-ing operations management — Part 1: Overview, concepts and terminology
2013-11-22
TC 199 Safety of machinery
ISO 13849-1:2006/DAmd 1
* Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design — Amendment 1
2014-01-30
ISO/DIS 14120 * Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards
2014-01-23
(Revision of ISO 14120:2002)
TC 204 Intelligent transport systems
ISO/DIS 12855 * Electronic fee collection — Infor-mation exchange between ser-vice provision and toll charging
2014-01-30
(Revision of ISO 12855:2012, ISO 12855:2012/Cor 1:2013)
6 ISO Update, Supplement to ISO Focus -- September 2013
TC 206 Fine ceramics
ISO/DIS 17138 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Mechanical properties of ceramic composites at room temperature — Determination of flexural strength
2013-11-10
ISO/DIS 17139 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Ceramic compos-ites — Thermophysical proper-ties — Determination of thermal expansion
2013-11-10
ISO/DIS 17140 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Mechanical properties of ceramic composites at room temperature — Determination of fatigue properties at constant amplitude
2013-11-10
ISO/DIS 17142 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure — Determination of fatigue properties at constant amplitude
2013-11-10
ISO/DIS 17161 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Ceramic composites — Guide to the determination of the degree of misalignment in uniaxial mechanical tests
2013-11-10
ISO/DIS 17170 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Test method for sphere indentation of porous ceramics
2013-11-14
ISO/DIS 20507 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Vocabulary
2013-11-15
(Revision of ISO 20507:2003)
TC 210 Quality management and corresponding general as-pects for medical devices
ISO/DIS 80369-20
* Small-bore connectors for liquids and gases in healthcare applica-tions — Part 20: Common test methods
2014-01-23
TC 211 Geographic information/Geomatics
ISO/DIS 19135-1
* Geographic information — Pro-cedures for item registration — Part 1: Fundamentals
2014-01-30
(Revision of ISO 19135:2005)
TC 218 Timber
ISO/DIS 13061-1.2
* Physical and mechanical proper-ties of wood - Test methods for small clear specimen — Part 1: Determination of moisture con-tent for physical and mechanical tests
2013-10-09
(Revision of ISO 3130:1975)
ISO/DIS 13061-2.2
* Physical and mechanical proper-ties of wood - Test methods for small clear specimen — Part 2: Determination of density for physical and mechanical tests
2013-10-09
(Revision of ISO 3130:1975)
ISO/DIS 13061-3.2
* Physical and mechanical proper-ties of wood - Test methods for small clear specimen — Part 3: Determination of ultimate strength in static bending
2013-10-09
(Revision of ISO 3130:1975)
ISO/DIS 13061-4.2
* Physical and mechanical proper-ties of wood - Test methods for small clear specimen — Part 4: Determination of modulus of elasticity in static bending
2013-10-09
(Revision of ISO 3130:1975)
ISO/DIS 13061-6.2
* Physical and mechanical proper-ties of wood - Test methods for small clear specimen — Part 6: Determination of ultimate tensile stress parallel to grain
2013-10-09
(Revision of ISO 3130:1975)
ISO/DIS 13061-7.2
* Physical and mechanical proper-ties of wood - Test methods for small clear specimen — Part 7: Determination of ultimate tensile stress perpendicular to grain
2013-10-09
(Revision of ISO 3130:1975)
ISO/DIS 17959 * General requirements for solid wood flooring
2013-11-06
TC 223 Societal security
ISO/DIS 22315 * Societal security — Mass evacu-ation — Guidelines for planning
2013-11-24
ISO/DIS 22397 * Societal security — Guidelines for establishing partnering arrangements
2013-11-24
TC 228 Tourism and related services
ISO/DIS 17680 * Thalassotherapy — Service requirements
2013-11-20
JTC 1 Information technology
ISO/IEC DIS 33001
* Information technology — Pro-cess assessment — Concepts and terminology
2013-11-24
ISO/IEC DIS 33002
* Information Technology — Pro-cess Assessment — Require-ments for performing process assessment
2013-11-24
ISO/IEC DIS 33003
* Information technology — Pro-cess assessment — Require-ments for process measurement frameworks
2013-11-24
ISO/IEC DIS 33004
* Information technology — Pro-cess assessment — Require-ments for process reference, process assessment and matu-rity models
2013-11-24
ISO/IEC DIS 33020
* Information technology — Pro-cess assessment — Process measurement framework for as-sessment of process capability
2013-11-24
ISO/IEC DIS 30100-3
* Information technology — Home network resource manage-ment — Part 3: Management applications
2013-11-14
ISO Update, Supplement to ISO Focus -- September 2013 7
ISO/IEC DIS 18014-4
* Information technology — Secu-rity techniques — Time-stamping services — Part 4: Traceability of time sources
2013-11-14
ISO/IEC 14496-4:2004/DAmd 41
* Information technology — Cod-ing of audio-visual objects — Part 4: Conformance testing — Amendment 41: Conformance testing of MVC plus depth exten-sion of AVC
2013-11-29
ISO/IEC DIS 29167-1
* Information technology — Au-tomatic identification and data capture techniques — Part 1: Security services for RFID air interfaces
2013-11-10
(Revision of ISO/IEC 29167-1:2012)
ISO/IEC DIS 29167-11
* Information technology — Au-tomatic identification and data capture techniques — Part 11: Air Interface for security services crypto suite PRESENT-80
2013-11-10
FDIS circulated
Period from 01 August to 31 August 2013
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 6 Paper, board and pulps
ISO/FDIS 535 * Paper and board — Determina-tion of water absorptiveness — Cobb method
2013-11-23
(Revision of ISO 535:1991)
TC 21 Equipment for fire protec-tion and fire fighting
ISO/FDIS 6182-1
* Fire protection — Automatic sprinkler systems — Part 1: Requirements and test methods for sprinklers
2013-10-08
(Revision of ISO 6182-1:2004)
TC 23 Tractors and machinery for agriculture and forestry
ISO/FDIS 12934
* Tractors and machinery for agriculture and forestry — Basic types — Vocabulary
2013-10-03
TC 28 Petroleum products and lubricants
ISO/FDIS 8311 * Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — Calibration of membrane tanks and independ-ent prismatic tanks in ships — Manual and internal electro-opti-cal distance-ranging methods
2013-10-09
(Revision of ISO 8311:1989)
TC 38 Textiles
ISO/FDIS 2076 * Textiles — Man-made fibres — Generic names
(Revision of ISO 2076:2010)
ISO/FDIS 13934-2
* Textiles — Tensile properties of fabrics — Part 2: Determination of maximum force using the grab method
2013-11-30
(Revision of ISO 13934-2:1999)
TC 41 Pulleys and belts (including veebelts)
ISO/FDIS 11749
* Belt drive — V-ribbed belts for the automotive industry — Fa-tigue test
2013-10-27
(Revision of ISO 11749:1995, ISO 11749:1995/Cor 1:2003)
TC 44 Welding and allied processes
ISO 9539:2010/FDAmd 1
* Gas welding equipment — Materials for equipment used in gas welding, cutting and allied processes — Amendment 1
2013-10-09
ISO/FDIS 10225
* Gas welding equipment — Marking for equipment used for gas welding, cutting and allied processes
2013-10-03
TC 54 Essential oils
ISO/FDIS 9235 * Aromatic natural raw materials — Vocabulary
2013-10-16
(Revision of ISO 9235:1997)
TC 58 Gas cylinders
ISO/FDIS 10462
* Gas cylinders — Acetylene cylin-ders — Periodic inspection and maintenance
2013-10-23
(Revision of ISO 10462:2005)
TC 61 Plastics
ISO/FDIS 306 * Plastics — Thermoplastic ma-terials — Determination of Vicat softening temperature (VST)
(Revision of ISO 306:2004)
ISO/FDIS 29221
* Plastics — Determination of mode I plane-strain crack-arrest toughness
2013-10-16
ISO/FDIS 15791-1
* Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance
2013-10-30
(Revision of ISO 15791-1:2002)
TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries
ISO/FDIS 11960
* Petroleum and natural gas indus-tries — Steel pipes for use as casing or tubing for wells
2013-11-30
(Revision of ISO 11960:2011)
TC 94 Personal safety -- Pro-tective clothing and equipment
8 ISO Update, Supplement to ISO Focus -- September 2013
ISO/FDIS 17491-5
* Protective clothing - Test meth-ods for clothing providing pro-tection against chemicals — Part 5: Determination of resistance to penetration by a spray of liquid (manikin spray test)
2013-10-07
(Revision of ISO 17491:2002)
TC 106 Dentistry
ISO/FDIS 17304
* Dentistry — Polymerization shrinkage: Method for determi-nation of polymerization shrink-age of polymer-based restorative materials
TC 121 Anaesthetic and respiratory equipment
ISO/FDIS 27427
* Anaesthetic and respiratory equipment — Nebulizing sys-tems and components
2013-10-24
(Revision of ISO 27427:2010)
TC 130 Graphic technology
ISO/FDIS 12647-1
* Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 1: Parameters and measurement methods
2013-10-20
(Revision of ISO 12647-1:2004)
ISO/FDIS 12647-2
* Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 2: Offset lithographic processes
2013-10-20
(Revision of ISO 12647-2:2004, ISO 12647-2:2004/Amd 1:2007)
ISO/FDIS 12647-3
* Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 3: Coldset offset lithography on newsprint
2013-10-20
(Revision of ISO 12647-3:2005)
ISO/FDIS 15397
Graphic technology — Com-munication of graphic paper properties
2013-10-30
TC 135 Non-destructive testing
ISO/FDIS 5579 * Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules
2013-10-16
(Revision of ISO 5579:1998)
TC 150 Implants for surgery
ISO/FDIS 15309
* Implants for surgery — Differen-tial scanning calorimetry of poly ether ether ketone (PEEK) poly-mers and compounds for use in implantable medical devices
2013-10-21
TC 164 Mechanical testing of metals
ISO/FDIS 14577-1
* Metallic materials — Instrument-ed indentation test for hardness and materials parameters — Part 1: Test method
2013-10-16
(Revision of ISO 14577-1:2002)
ISO/FDIS 14577-2
* Metallic materials — Instrument-ed indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
2013-10-16
(Revision of ISO 14577-2:2002)
ISO/FDIS 14577-3
* Metallic materials — Instrument-ed indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
2013-10-16
(Revision of ISO 14577-3:2002)
TC 201 Surface chemical analysis
ISO/FDIS 18115-1
* Surface chemical analysis — Vocabulary — Part 1: Gen-eral terms and terms used in spectroscopy
2013-10-07
(Revision of ISO 18115-1:2010, ISO 18115-1:2010/DAmd 1)
ISO/FDIS 18115-2
* Surface chemical analysis — Vo-cabulary — Part 2: Terms used in scanning-probe microscopy
2013-10-07
(Revision of ISO 18115-2:2010, ISO 18115-2:2010/DAmd 1)
TC 202 Microbeam analysis
ISO/FDIS 15932
* Microbeam analysis — Ana-lytical electron microscopy — Vocabulary
2013-10-23
TC 211 Geographic information/Geomatics
ISO/FDIS 19157
* Geographic information — Data quality
2013-10-09
(Revision of ISO 19113:2002, ISO 19114:2003, ISO/TS 19138:2006)
TC 213 Dimensional and geometri-cal product specifications and verification
ISO/FDIS 10360-8
* Geometrical product specifica-tions (GPS) — Acceptance and reverification tests for coordi-nate measuring systems (CMM) — Part 8: CMMs with optical distance sensors
2013-10-16
IULTCS International Union of Leather Technologists and Chemists Societies
ISO/FDIS 11646
* Leather — Measurement of area
2013-10-16
(Revision of ISO 11646:1993)
JTC 1 Information technology
ISO/IEC/IEEE 8802-11:2012/FDAmd 1
* Information technology — Tel-ecommunications and informa-tion exchange between systems — Local and metropolitan area networks — Specific require-ments — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications — Amendment 1: Prioritization of management frames (adoption of IEEE Std 802-11ae-2012)
2014-01-29
ISO Update, Supplement to ISO Focus -- September 2013 9
ISO/IEC/IEEE 8802-11:2012/FDAmd 2
* Information technology — Tel-ecommunications and informa-tion exchange between systems — Local and metropolitan area networks — Specific require-ments — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) speci-fications — Amendment 2: MAC enhancements for robust audio video streaming (adoption of IEEE Std 802.11aa-2012)
2014-01-29
ISO/IEC/IEEE 8802-11:2012/FDAmd 3
* Information technology — Tele-communications and information exchange between systems — Local and metropolitan area net-works — Specific requirements — Part 11: Wireless LAN me-dium access control (MAC) and physical layer (PHY) specifica-tions — Amendment 3: Enhance-ments for very high throughput in the 60 GHz band (adoption of IEEE Std 802.11ad-2012)
2014-01-29
ISO/IEC FDIS 9594-1
* Information technology — Open Systems Interconnection — The Directory — Part 1: Overview of concepts, models and services
2013-10-23
(Revision of ISO/IEC 9594-1:2008, ISO/IEC 9594-1:2008/DAmd 2, ISO/IEC 9594-1:2008/DAmd 1, ISO/IEC 9594-1:2008/DAmd 3)
ISO/IEC FDIS 9594-2
* Information technology — Open Systems Interconnection — The Directory — Part 2: Models
2013-10-23
(Revision of ISO/IEC 9594-2:2008, ISO/IEC 9594-2:2008/DAmd 2, ISO/IEC 9594-2:2008/DAmd 1, ISO/IEC 9594-2:2008/Cor 1:2011, ISO/IEC 9594-2:2008/DAmd 3, ISO/IEC 9594-2:2008/Cor 2:2012)
ISO/IEC FDIS 9594-3
* Information technology — Open Systems Interconnection — The Directory — Part 3: Abstract service definition
2013-10-23
(Revision of ISO/IEC 9594-3:2008, ISO/IEC 9594-3:2008/DAmd 2, ISO/IEC 9594-3:2008/DAmd 1, ISO/IEC 9594-3:2008/Cor 1:2011, ISO/IEC 9594-3:2008/DAmd 3, ISO/IEC 9594-3:2008/Cor 2:2012)
ISO/IEC FDIS 9594-4
* Information technology — Open Systems Interconnection — The Directory — Part 4: Procedures for distributed operation
2013-10-23
(Revision of ISO/IEC 9594-4:2008, ISO/IEC 9594-4:2008/DAmd 2, ISO/IEC 9594-4:2008/DAmd 1, ISO/IEC 9594-4:2008/Cor 1:2011)
ISO/IEC FDIS 9594-5
* Information technology — Open Systems Interconnection — The Directory — Part 5: Protocol specifications
2013-10-23
(Revision of ISO/IEC 9594-5:2008, ISO/IEC 9594-5:2008/DAmd 2, ISO/IEC 9594-5:2008/DAmd 1, ISO/IEC 9594-5:2008/Cor 1:2011, ISO/IEC 9594-5:2008/Cor 2:2012)
ISO/IEC FDIS 9594-6
* Information technology — Open Systems Interconnection — The Directory — Part 6: Selected at-tribute types
2013-10-23
(Revision of ISO/IEC 9594-6:2008, ISO/IEC 9594-6:2008/DAmd 2, ISO/IEC 9594-6:2008/DAmd 1, ISO/IEC 9594-6:2008/Cor 1:2011, ISO/IEC 9594-6:2008/DAmd 3, ISO/IEC 9594-6:2008/Cor 2:2012, ISO/IEC 9594-6:2008/Cor 3:2013)
ISO/IEC FDIS 9594-7
* Information technology — Open Systems Interconnection — The Directory — Part 7: Selected object classes
2013-10-23
(Revision of ISO/IEC 9594-7:2008, ISO/IEC 9594-7:2008/DAmd 2, ISO/IEC 9594-7:2008/DAmd 1, ISO/IEC 9594-7:2008/DAmd 3, ISO/IEC 9594-7:2008/Cor 1:2012)
ISO/IEC FDIS 9594-8
* Information technology — Open Systems Interconnection — The Directory — Part 8: Public-key and attribute certificate frameworks
2013-10-23
(Revision of ISO/IEC 9594-8:2008, ISO/IEC 9594-8:2008/DAmd 2, ISO/IEC 9594-8:2008/DAmd 1, ISO/IEC 9594-8:2008/Cor 1:2011, ISO/IEC 9594-8:2008/DAmd 3, ISO/IEC 9594-8:2008/Cor 2:2012, ISO/IEC 9594-8:2008/Cor 3:2013)
ISO/IEC FDIS 9594-9
* Information technology — Open Systems Interconnection — The Directory — Part 9: Replication
2013-10-23
(Revision of ISO/IEC 9594-9:2008, ISO/IEC 9594-9:2008/DAmd 2, ISO/IEC 9594-9:2008/DAmd 1, ISO/IEC 9594-9:2008/Cor 1:2011)
ISO/IEC FDIS 18025
* Information technology — Envi-ronmental Data Coding Specifi-cation (EDCS)
2013-10-17
(Revision of ISO/IEC 18025:2005)
ISO/IEC FDIS 19775-1
* Information technology — Com-puter graphics, image process-ing and environmental data representation — Extensible 3D (X3D) — Part 1: Architecture and base components
2013-10-17
(Revision of ISO/IEC 19775-1:2008)
ISO/IEC FDIS 20009-2
* Information technology — Secu-rity techniques — Anonymous entity authentication — Part 2: Mechanisms based on signa-tures using a group public key
2013-10-23
ISO/IEC FDIS 27036-3
* Information technology — Se-curity techniques — Information security for supplier relation-ships — Part 3: Guidelines for information and communication technology supply chain security
2013-10-06
ISO/IEC 19794-2:2011/FDAmd 1
* Information technology — Bio-metric data interchange formats — Part 2: Finger minutiae data — Amendment 1: Conformance testing methodology and clarifi-cation of defects
2013-10-29
10 ISO Update, Supplement to ISO Focus -- September 2013
Standards published
New International Standards published between 01 August and 31 August 2013
* Available in English only
** French version of standard previously published in English only
Price
group
TC 4 Rolling bearings
ISO 1206:2001/Amd 1:2013
Rolling bearings — Needle roller bear-ings, dimension series 48, 49 and 69 — Boundary dimensions and toler-ances — Amendment 1: Tolerances for shaft raceway
XZ
ISO 10317:2008/Amd 1:2013
Rolling bearings — Tapered roller bear-ings — Designation system — Amend-ment 1: Design variant designation and comparison of tolerance class designations for single-row tapered roller bearings
XZ
TC 8 Ships and marine technology
ISO 18421:2013
* Ships and marine technology — In-land navigation vessels — Lifebuoy housings
C
TC 20 Aircraft and space vehicles
ISO 14186:2013
* Air cargo — Fire containment covers — Design, performance and testing requirements
M
TC 22 Road vehicles
ISO 19072-2:2013
* Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 2: Test methods and general performance requirements
K
ISO 13044-2:2013
* Road vehicles — Fully automatic cou-pling systems 24 V (FACS) for heavy commercial vehicle combinations — Part 2: 50 mm fifth wheel couplings — Electrical and pneumatic interface
N
TC 23 Tractors and machinery for agri-culture and forestry
ISO 5395-1:2013
Garden equipment — Safety require-ments for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests
T
ISO 5395-2:2013
Garden equipment — Safety require-ments forcombustion-engine-powered lawn-mowers — Part 2: Pedestrian-con-trolled lawnmowers
Q
ISO 5395-3:2013
Garden equipment — Safety require-ments for combustion-engine-powered lawn-mowers — Part 3: Ride-on lawnmow-ers with seated operator
S
ISO 10517:2009/Amd 1:2013
Powered hand-held hedge trimmers — Safety — Amendment 1
XZ
TC 24 Particle characterization includ-ing sieving
ISO 20998-2:2013
* Measurement and characterization of particles by acoustic methods — Part 2: Guidelines for linear theory
P
ISO 3310-2:2013
* Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate
E
TC 28 Petroleum products and lubricants
ISO 4261:2013 Petroleum products — Fuels (class F) — Specifications of gas turbine fuels for industrial and marine applications
J
TC 29 Small tools
ISO 3338-2:2013
* Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks
C
ISO 8404:2013 * Tools for moulding — Angle pins
B
ISO 883:2013 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions
G
ISO 7755-1:2013
Hardmetal burrs — Part 1: General specifications
D
ISO 7755-2:2013
Hardmetal burrs — Part 2: Cylindrical burrs (style A)
B
ISO 7755-3:2013
Hardmetal burrs — Part 3: Cylindrical round- (ball-) nose burrs (style C)
B
ISO 7755-4:2013
Hardmetal burrs — Part 4: Spherical burrs (style D)
B
ISO 7755-5:2013
Hardmetal burrs — Part 5: Oval burrs (style E)
B
ISO 7755-6:2013
Hardmetal burrs — Part 6: Arch round- (ball-) nose burrs (style F)
B
ISO 7755-7:2013
Hardmetal burrs — Part 7: Arch pointed-nose burrs (style G)
B
ISO 7755-8:2013
Hardmetal burrs — Part 8: Flame burrs (style H)
B
ISO 7755-9:2013
Hardmetal burrs — Part 9: 60 degrees and 90 degrees cone burrs (styles J and K)
B
ISO Update, Supplement to ISO Focus -- September 2013 11
ISO 7755-10:2013
Hardmetal burrs — Part 10: Conical round- (ball-) nose burrs (style L)
B
ISO 7755-11:2013
Hardmetal burrs — Part 11: Conical pointed-nose burrs (style M)
B
ISO 7755-12:2013
Hardmetal burrs — Part 12: Inverted cone burrs (style N)
B
TC 33 Refractories
ISO 16334:2013
Monolithic refractory products — De-termination of resistance to explosive spalling
B
TC 34 Food products
ISO 9622:2013 Milk and liquid milk products — Guide-lines for the application of mid-infrared spectrometry
G
ISO 4833-1:2013
Microbiology of the food chain — Horizontal method for the enumeration of microorganisms — Part 1: Colony count at 30 degrees C by the pour plate technique
E
ISO 4833-2:2013
Microbiology of the food chain — Horizontal method for the enumeration of microorganisms — Part 2: Colony count at 30 degrees C by the surface plating technique
F
TC 35 Paints and varnishes
ISO 11997-2:2013
Paints and varnishes — Determina-tion of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light
D
ISO 15528:2013
Paints, varnishes and raw materials for paints and varnishes — Sampling
F
TC 36 Cinematography
ISO 4241:2013 * Cinematography — Projection leader (time-based), trailer and cue marks — Specifications
F
TC 44 Welding and allied processes
ISO 9692-1:2013
Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels
G
TC 45 Rubber and rubber products
ISO/TS 17796:2013
Rubber — Trapping and identification of volatile components of rubber fumes with active sampling on a poly(2,6-diphenylphenylene oxide) type sorbent, using thermodesorption and gas chromatographic method with mass spectrometric detection
G
ISO 17278:2013
* Rubber, raw natural — Determination of the gel content of technically speci-fied rubber (TSR)
D
ISO 5999:2013 Flexible cellular polymeric materials — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification
J
TC 46 Information and documentation
ISO 2789:2013 * Information and documentation — International library statistics
W
ISO 27729:2012/Cor 1:2013
* Information and documentation — International standard name identifier (ISNI) — Technical Corrigendum 1
free
TC 58 Gas cylinders
ISO 3807:2013 Gas cylinders — Acetylene cylinders — Basic requirements and type testing
N
ISO 12209:2013
* Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air
J
TC 60 Gears
ISO 1328-1:2013
Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of de-viations relevant to flanks of gear teeth
T
TC 61 Plastics
ISO 4892-3:2013
Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
H
ISO 4892-4:2013
* Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
E
TC 63 Glass containers
ISO 12821:2013
* Glass packaging — 26 H 180 crown finish — Dimensions
C
TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries
ISO 12211:2012
Petroleum, petrochemical and natural gas industries — Spiral plate heat exchangers
R
ISO 12212:2012
Petroleum, petrochemical and natural gas industries — Hairpin-type heat exchangers
S
ISO 13705:2012
Petroleum, petrochemical and natural gas industries — Fired heaters for general refinery service
XC
TC 69 Applications of statistical methods
ISO 22514-2:2013
* Statistical methods in process man-agement — Capability and perfor-mance — Part 2: Process capability and performance of time-dependent process models
L
ISO 3951-1:2013
* Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
X
12 ISO Update, Supplement to ISO Focus -- September 2013
ISO 3951-2:2013
* Sampling procedures for inspection by variables — Part 2: General specifica-tion for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
X
TC 70 Internal combustion engines
ISO 4548-13:2013
Methods of test for full-flow lubricating oil filters for internal combustion en-gines — Part 13: Static burst pressure test for composite filter housings
C
TC 92 Fire safety
ISO 29904:2013
Fire chemistry — Generation and measurement of aerosols
W
TC 93 Starch (including derivatives and by-products)
ISO 5379:2013 * Starches and derived products — De-termination of sulfur dioxide content — Acidimetric method and nephelometric method
E
ISO 10504:2013
* Starch derivatives — Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups — Method using high-performance liquid chromatography
D
TC 94 Personal safety -- Protective clothing and equipment
ISO 12312-1:2013
Eye and face protection — Sunglasses and related eyewear — Part 1: Sun-glasses for general use
L
TC 106 Dentistry
ISO 21563:2013
Dentistry — Hydrocolloid impression materials
S
TC 108 Mechanical vibration, shock and condition monitoring
ISO 21940-31:2013
* Mechanical vibration — Rotor balanc-ing — Part 31: Susceptibility and sensi-tivity of machines to unbalance
K
ISO 20958:2013
Condition monitoring and diagnostics of machine systems — Electrical signa-ture analysis of three-phase induction motors
M
TC 110 Industrial trucks
ISO 3691-1:2011/Cor 1:2013
Industrial trucks — Safety require-ments and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks — Technical Corrigendum 1
free
ISO 3691-6:2013
Industrial trucks — Safety requirements and verification — Part 6: Burden and personnel carriers
M
TC 118 Compressors and pneumatic tools, machines and equipment
ISO 11011:2013
Compressed air — Energy efficiency — Assessment
U
TC 120 Leather
ISO 5433:2013 * Leather — Bovine wet blue — Specification
C
TC 121 Anaesthetic and respiratory equipment
IEC 80601-2-30:2009/Amd 1:2013
* Medical electrical equipment — Part 2-30: Particular requirements for basic safety and essential performance of automated non-invasive sphygmoma-nometers — Amendment 1
XZ
TC 122 Packaging
ISO 13274:2013
Packaging — Transport packaging for dangerous goods — Plastics compat-ibility testing for packaging and IBCs
N
ISO 16495:2013
Packaging — Transport packaging for dangerous goods — Test methods
U
TC 126 Tobacco and tobacco products
ISO 20774:2013
Cigarettes — Determination of carbon monoxide in sidestream smoke — Method using a routine analytical linear smoking machine equipped with a fishtail chimney
L
TC 127 Earth-moving machinery
ISO 6747:2013 Earth-moving machinery — Doz-ers — Terminology and commercial specifications
P
TC 135 Non-destructive testing
ISO 16811:2012
Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
R
TC 147 Water quality
ISO 13164-1:2013
* Water quality — Radon-222 — Part 1: General principles
M
ISO 13164-2:2013
Water quality — Radon-222 — Part 2: Test method using gamma-ray spectrometry
G
ISO 13164-3:2013
Water quality — Radon-222 — Part 3: Test method using emanometry
L
TC 153 Valves
ISO 10631:2013
Metallic butterfly valves for general purposes
H
TC 156 Corrosion of metals and alloys
ISO/TR 16335:2013
* Corrosion of metals and alloys — Cor-rosion tests in artificial atmospheres — Guidelines for selection of accelerated corrosion test for product qualification
J
TC 164 Mechanical testing of metals
ISO 20032:2013
* Method for evaluation of tensile prop-erties of metallic superplastic materials
F
TC 182 Geotechnics
ISO 14688-1:2002/Amd 1:2013
* Geotechnical investigation and test-ing — Identification and classification of soil — Part 1: Identification and description — Amendment 1
XZ
ISO Update, Supplement to ISO Focus -- September 2013 13
ISO 14688-2:2004/Amd 1:2013
* Geotechnical investigation and testing — Identification and classification of soil — Part 2: Principles for a classifi-cation — Amendment 1
XZ
TC 188 Small craft
ISO 10088:2013
Small craft — Permanently installed fuel systems
H
TC 190 Soil quality
ISO 11916-1:2013
Soil quality — Determination of select-ed explosives and related compounds — Part 1: Method using high-perfor-mance liquid chromatography (HPLC) with ultraviolet detection
M
ISO 11916-2:2013
Soil quality — Determination of select-ed explosives and related compounds — Part 2: Method using gas chroma-tography (GC) with electron capture detection (ECD) or mass spectrometric detection (MS)
M
ISO/TS 16727:2013
* Soil quality — Determination of mercu-ry — Cold vapour atomic fluorescence spectrometry (CVAFS)
C
ISO/TS 16965:2013
* Soil quality — Determination of trace elements using inductively coupled plasma mass spectrometry (ICP-MS)
G
ISO 29200:2013
Soil quality — Assessment of geno-toxic effects on higher plants — Vicia faba micronucleus test
J
TC 204 Intelligent transport systems
ISO/TS 15638-6:2013
* Intelligent transport systems --- Frame-work for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 6: Regu-lated applications
S
ISO/TS 15638-8:2013
* Intelligent transport systems — Frame-work for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 8: Vehi-cle access monitoring (VAM)
T
ISO/TS 15638-11:2013
* Intelligent transport systems — Frame-work for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 11: Driver work records (work and rest hours compliance) (DWR)
U
ISO/TS 15638-12:2013
* Intelligent transport systems — Frame-work for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 12: Vehicle mass monitoring (VMM)
U
ISO/TS 15638-14:2013
* Intelligent transport systems — Frame-work for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 14: Vehicle access control (VAC)
T
ISO/TS 15638-15:2013
* Intelligent transport systems — Frame-work for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 15: Vehi-cle location monitoring (VLM)
T
ISO/TS 15638-16:2013
* Intelligent transport systems — Frame-work for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 16: Vehicle speed monitoring (VSM)
U
ISO/TS 15638-17:2013
* Intelligent transport systems — Frame-work for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 17: Consignment and location monitoring (CLM)
T
ISO/TR 24014-2:2013
* Public transport — Interoperable fare management system — Part 2: Busi-ness practices
M
TC 213 Dimensional and geometrical product specifications and verification
ISO 286-2:2010/Cor 1:2013
Geometrical product specifications (GPS) — ISO code system for toler-ances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts — Technical Corrigendum 1
free
ISO 14253-1:2013
Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equip-ment — Part 1: Decision rules for prov-ing conformity or nonconformity with specifications
H
ISO/TS 15530-1:2013
Geometrical product specifications (GPS) — Coordinate measuring ma-chines (CMM): Technique for determin-ing the uncertainty of measurement — Part 1: Overview and metrological characteristics
G
ISO 16610-85:2013
Geometrical product specifications (GPS) — Filtration — Part 85: Morpho-logical areal filters: Segmentation
M
TC 226 Materials for the production of primary aluminium
ISO 2926:2013 * Aluminium oxide used for the produc-tion of primary aluminium — Particle size analysis for the range 45 µm to 150 µm — Method using electroformed sieves
E
TC 228 Tourism and related services
ISO/TR 21102:2013
* Adventure tourism — Leaders — Per-sonnel competence
D
TMB Technical Management Board
ISO/IEC Guide 98-4:2012
Uncertainty of measurement — Part 4: Role of measurement uncertainty in conformity assessment
T
JTC 1 Information technology
ISO/IEC 25064:2013
* Systems and software engineering — Software product Quality Requirements and Evaluation (SQuaRE) — Common Industry Format (CIF) for usability: User needs report
L
ISO/IEC 26550:2013
* Software and systems engineering — Reference model for product line engineering and management
Q
ISO/IEC/IEEE 29119-1:2013
* Software and systems engineering — Software testing — Part 1: Concepts and definitions
U
ISO/IEC/IEEE 29119-2:2013
* Software and systems engineer-ing — Software testing — Part 2: Test processes
U
14 ISO Update, Supplement to ISO Focus -- September 2013
ISO/IEC/IEEE 29119-3:2013
* Software and systems engineer-ing — Software testing — Part 3: Test documentation
XB
ISO/IEC TR 29154:2013
* Software engineering — Guide for the application of ISO/IEC 24773:2008 (Certification of software engineer-ing professionals — Comparison framework)
G
ISO/IEC 10373-3:2010/Cor 1:2013
* Identification cards — Test methods — Part 3: Integrated circuit cards with contacts and related interface devices — Technical Corrigendum 1
free
ISO/IEC 10373-6:2011/Cor 1:2013
* Identification cards — Test methods — Part 6: Proximity cards — Technical Corrigendum 1: R2 value range, start of PICC transmission and program for EMD level measurement
free
ISO/IEC/IEEE 9945:2009/Cor 1:2013
* Information technology — Portable Operating System Interface (POSIX®) Base Specifications, Issue 7 — Techni-cal Corrigendum 1
free
ISO/IEC 14496-5:2001/Amd 24:2009/Cor 2:2013
* Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 24: Reference software for AAC-ELD — Technical Corrigendum 2
free
ISO/IEC 14496-10:2012/Cor 1:2013
* Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Technical Corrigendum 1
free
ISO/IEC 14496-12:2012/Cor 1:2013
* Information technology — Coding of audio-visual objects — Part 12: ISO base media file format — Technical Corrigendum 1
free
ISO/IEC 14496-26:2010/Cor 7:2013
* Information technology — Coding of audio-visual objects — Part 26: Audio conformance — Technical Corrigen-dum 7
free
ISO/IEC 14496-28:2012/Cor 1:2013
* Information technology — Coding of audio-visual objects — Part 28: Com-posite font representation — Technical Corrigendum 1
free
ISO/IEC 23003-3:2012/Cor 2:2013
* Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Technical Cor-rigendum 2
free
ISO/IEC 23005-3:2013/Cor 1:2013
* Information technology — Media context and control — Part 3: Sensory information — Technical Corrigendum 1
free
ISO/IEC 24730-62:2013
* Information technology — Real time lo-cating systems (RTLS) — Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface
U
Standards confirmed
The following International Standards are confimred for a five year period:
TC 2 Fasteners
ISO 8734:1997 (reconfirmed)
ISO 8735:1997 (reconfirmed)
ISO 23429:2004 (reconfirmed)
ISO 4757:1983 (reconfirmed)
TC 20 Aircraft and space vehicles
ISO 14961:2002 (reconfirmed)
ISO 15395:1998 (reconfirmed)
ISO 21961:2003 (reconfirmed)
ISO 21962:2003 (reconfirmed)
ISO 22645:2005 (reconfirmed)
ISO 14302:2002 (reconfirmed)
ISO 14303:2002 (reconfirmed)
ISO 14620-3:2005 (reconfirmed)
ISO 14711:2003 (reconfirmed)
ISO 14954:2005 (reconfirmed)
ISO 15387:2005 (reconfirmed)
ISO 15864:2004 (reconfirmed)
ISO 21351:2005 (reconfirmed)
TC 27 Solid mineral fuels
ISO 10086-2:2004 (reconfirmed)
ISO 15117-1:2004 (reconfirmed)
TC 28 Petroleum products and lubricants
ISO 1516:2002 (reconfirmed)
ISO 1523:2002 (reconfirmed)
ISO 2207:1980 (reconfirmed)
ISO 3013:1997 (reconfirmed)
ISO 3448:1992 (reconfirmed)
ISO/TR 3666:1998 (reconfirmed)
ISO 6297:1997 (reconfirmed)
ISO 6618:1997 (reconfirmed)
ISO 7537:1997 (reconfirmed)
ISO 7624:1997 (reconfirmed)
ISO 8973:1997 (reconfirmed)
ISO 9120:1997 (reconfirmed)
ISO 14935:1998 (reconfirmed)
ISO 15029-1:1999 (reconfirmed)
ISO 15167:1999 (reconfirmed)
ISO 20763:2004
ISO 10337:1997 (reconfirmed)
ISO 11223:2004 (reconfirmed)
TC 34 Food products
ISO/TS 16634-2:2009
ISO/TS 17996:2006
(reconfirmed)
TC 38 Textiles
ISO 4912:1981 (reconfirmed)
ISO 4913:1981 (reconfirmed)
ISO 8160:1987 (reconfirmed)
ISO 10132:1993 (reconfirmed)
TC 60 Gears
ISO 701:1998 (reconfirmed)
TC 61 Plastics
ISO 1060-1:1998 (reconfirmed)
ISO 1068:1975 (reconfirmed)
ISO 1628-2:1998 (reconfirmed)
ISO 1628-5:1998 (reconfirmed)
ISO 1875:1982 (reconfirmed)
ISO Update, Supplement to ISO Focus -- September 2013 15
ISO 2897-2:2003 (reconfirmed)
ISO 6186:1998 (reconfirmed)
ISO 8257-1:1998 (reconfirmed)
ISO 8985:1998 (reconfirmed)
ISO 10366-2:2003 (reconfirmed)
ISO 13000-1:2005 (reconfirmed)
ISO 13000-2:2005 (reconfirmed)
ISO 13741-1:1998 (reconfirmed)
ISO 13741-2:1998 (reconfirmed)
ISO 15023-2:2003 (reconfirmed)
ISO 16152:2005 (reconfirmed)
ISO 22498:2005 (reconfirmed)
ISO 1268-8:2004 (reconfirmed)
TC 96 Cranes
ISO 4304:1987 (reconfirmed)
TC 108 Mechanical vibration, shock and condi-tion monitoring
ISO 1925:2001
ISO 1940-1:2003
TC 127 Earth-moving machinery
ISO 6015:2006
ISO 6016:2008
ISO 6484:1986 (reconfirmed)
ISO 7457:1997 (reconfirmed)
ISO 9248:1992 (reconfirmed)
ISO 9249:2007
ISO 10265:2008
ISO 10266:1992 (reconfirmed)
ISO 10567:2007
ISO 14397-1:2007
ISO 14397-2:2007
ISO 16754:2008
TC 159 Ergonomics
ISO 10075:1991 (reconfirmed)
TC 168 Prosthetics and orthotics
ISO 15032:2000 (reconfirmed)
TC 186 Cutlery and table and decorative metal hollow-ware
ISO 8442-1:1997 (reconfirmed)
ISO 8442-2:1997 (reconfirmed)
ISO 8442-3:1997 (reconfirmed)
ISO 8442-4:1997 (reconfirmed)
ISO 8442-5:2004 (reconfirmed)
ISO 8442-6:2000 (reconfirmed)
ISO 8442-7:2000 (reconfirmed)
ISO 8442-8:2000 (reconfirmed)
TC 194 Biological evaluation of medical devices
ISO 10993-14:2001
(reconfirmed)
ISO 10993-15:2000
(reconfirmed)
Standards withdrawn
Period from 01 August to 31 August 2013
TC 23 Tractors and machinery for agriculture and forestry
ISO 5395:1990 (replaced by ISO 5395-1:2013, ISO 5395-2:2013, ISO 5395-3:2013)
ISO 5395:1990/Amd 1:1992
(replaced by ISO 5395-1:2013, ISO 5395-2:2013, ISO 5395-3:2013)
TC 34 Food products
ISO 4833:2003 (replaced by ISO 4833-1:2013, ISO 4833-2:2013)
TC 58 Gas cylinders
ISO 3807-1:2000 (replaced by ISO 3807:2013)
ISO 3807-2:2000 (replaced by ISO 3807:2013)
ISO 12209-1:2000 (replaced by ISO 12209:2013)
ISO 12209-2:2000 (replaced by ISO 12209:2013)
ISO 12209-3:2000 (replaced by ISO 12209:2013)
TC 69 Applications of statistical methods
ISO 21747:2006 (replaced by ISO 22514-2:2013)
TC 106 Dentistry
ISO 1563:1990 (replaced by ISO 21563:2013)
ISO 1564:1995 (replaced by ISO 21563:2013)
ISO 13716:1999 (replaced by ISO 21563:2013)
TC 108 Mechanical vibration, shock and condi-tion monitoring
ISO 10814:1996 (replaced by ISO 21940-31:2013)
TC 122 Packaging
ISO 16101:2004 (replaced by ISO 13274:2013)
ISO 16104:2003 (replaced by ISO 16495:2013)
ISO 16467:2003 (replaced by ISO 16495:2013)
ISO 23667:2007 (replaced by ISO 13274:2013)
Meeting calendar
(update at 01 August 2013)
Meetings called for the month of July are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
September 2013
1-4 Moscow (Rus-sian Federation)
TC 20/SC 10 Aircraft and space vehicles/Aerospace fluid systems and components
3-6 Hangzhou (China)
TC 172/SC 5 Optics and photon-ics/Microscopes and endoscopes
16 ISO Update, Supplement to ISO Focus -- September 2013
4 Geneva (Switzerland)
CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
8-13 Suzhou (China) TC 61 Plastics
9 Victoria (Canada) TC 33 Refractories
9 Oslo (Norway) TC 138/SC 4 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply of gaseous fuels
9-10 Moscow (Rus-sian Federation)
JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
9-10 London (United Kingdom)
TC 21/SC 8 Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas
9-10 Paris (France) TC 26 Copper and copper alloys
9-11 London (United Kingdom)
TC 21/SC 5 Equipment for fire protection and fire fighting/Fixed firefighting systems using water
9-11 Gaithersburg (USA)
TC 172/SC 9 Optics and photon-ics/Electro-optical systems
9-13 Delft (Netherlands)
JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages
9-13 Edmonton (Canada)
TC 94/SC 14 Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment
9-13 Montreal (Canada)
TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to me-chanical vibration and shock
9-13 Tallberg (Sweden)
TC 258 Project, programme and portfolio management
10 London (United Kingdom)
TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems using foam and powder
10 Suzhou (China) TC 61/SC 1 Plastics/Terminology
10 Paris (France) TC 79/SC 11 Light metals and their alloys/Titanium
10-13 Stockholm (Sweden)
TC 205 Building environment design
11 London (United Kingdom)
TC 21/SC 3 Equipment for fire protection and fire fighting/Fire detection and alarm systems
11 London (United Kingdom)
TC 21/SC 11 Equipment for fire protection and fire fighting/Smoke and heat control systems and components
11 Suzhou (China) TC 61/SC 2 Plastics/Mechanical properties
11 Suzhou (China) TC 61/SC 5 Plastics/Physical-chemical properties
11 Suzhou (China) TC 61/SC 10 Plastics/Cellular plastics
11 Suzhou (China) TC 61/SC 11 Plastics/Products
11 Suzhou (China) TC 61/SC 12 Plastics/Thermoset-ting materials
11 Paris (France) TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium
11 Stockholm (Sweden)
TC 163/SC 2 Thermal performance and energy use in the built environment/Cal-culation methods
11 Stockholm (Sweden)
TC 163/SC 3 Thermal performance and energy use in the built environment/Thermal insulation products
11-12 Stockholm (Sweden)
TC 119/SC 3 Powder metallurgy/Sampling and testing methods for sintered metal materials (ex-cluding hardmetals)
12 London (United Kingdom)
TC 21/SC 2 Equipment for fire protection and fire fighting/Manu-ally transportable fire extinguishers
12 Suzhou (China) TC 61/SC 4 Plastics/Burning behaviour
12 Suzhou (China) TC 61/SC 6 Plastics/Ageing, chemical and environ-mental resistance
12 Suzhou (China) TC 61/SC 9 Plastics/Thermoplas-tic materials
12 Suzhou (China) TC 61/SC 13 Plastics/Composites and reinforcement fibres
12 Paris (France) TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium
12 Paris (France) TC 79/SC 6 Light metals and their alloys/Wrought aluminium and alu-minium alloys
12 Stockholm (Sweden)
TC 119/SC 2 Powder metallurgy/Sampling and testing methods for powders (including powders for hardmetals)
12 Stockholm (Sweden)
TC 119/SC 4 Powder metallurgy/Sampling and test-ing methods for hardmetals
12 Vienna (Austria) TC 146/SC 3 Air quality/Ambient atmospheres
12 Stockholm (Sweden)
TC 163/SC 1 Thermal performance and energy use in the built environment/Test and measurement methods
12-13 Stockholm (Sweden)
TC 163 Thermal performance and energy use in the built environment
ISO Update, Supplement to ISO Focus -- September 2013 17
13 London (United Kingdom)
TC 21 Equipment for fire protection and fire fighting
13 Singapore (Singapore)
TC 59/SC 17 Buildings and civil en-gineering works/Sus-tainability in buildings and civil engineering works
13 Paris (France) TC 79 Light metals and their alloys
13 Stockholm (Sweden)
TC 119 Powder metallurgy
13 Stockholm (Sweden)
TC 119/SC 5 Powder metallurgy/Specifications for powder metallurgical materials (excluding hardmetals)
13 Vienna (Austria) TC 146/SC 5 Air quality/Meteorology
13 Vienna (Austria) TC 146/SC 6 Air quality/Indoor air
13 Munich (Germany)
TC 244 Industrial furnaces and associated pro-cessing equipment
16-17 St. Peters-burg (Russian Federation)
DEVCO Committee on developing countries matters
16-17 St. Peters-burg (Russian Federation)
TMB Technical Manage-ment Board
16-20 Copenhagen (Denmark)
TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures
16-20 London (United Kingdom)
TC 150 Implants for surgery
16-20 Fukuoka (Japan) TC 190 Soil quality
17 Fukuoka (Japan) TC 190/SC 1 Soil quality/Evaluation of criteria, terminol-ogy and codification
17 Paris (France) TC 254 Safety of amusement rides and amusement devices
17-18 Jiangyin (China) TC 105 Steel wire ropes
17-18 Belo Horizonte (Brazil)
TC 155 Nickel and nickel alloys
17-19 Tokyo (Japan) JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
17-19 Velsen (Netherlands)
TC 164/SC 5 Mechanical testing of metals/Fatigue testing
17-19 Chengdu (China) TC 256 Pigments, dyestuffs and extenders
18 St. Peters-burg (Russian Federation)
CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
18 Velsen (Netherlands)
TC 164/SC 4 Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
18-19 Velsen (Netherlands)
TC 164/SC 2 Mechanical testing of metals/Ductility testing
18-20 St. Peters-burg (Russian Federation)
GA General Assembly
18-20 Shanghai (China) TC 232 Learning services outside formal education
19 Atlanta (USA) TC 142 Cleaning equipment for air and other gases
19 Velsen (Netherlands)
TC 164/SC 3 Mechanical testing of metals/Hardness testing
19 Fukuoka (Japan) TC 190/SC 4 Soil quality/Biological methods
19-20 Graz (Austria) TC 172/SC 6 Optics and photonics/Geodetic and survey-ing instruments
20 Brescia (Italy) TC 22/SC 25 Road vehicles/Vehi-cles using gaseous fuels
20 Velsen (Netherlands)
TC 164/SC 1 Mechanical testing of metals/Uniaxial testing
20 Fukuoka (Japan) TC 190/SC 2 Soil quality/Sampling
20 Fukuoka (Japan) TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics
20 Fukuoka (Japan) TC 190/SC 7 Soil quality/Soil and site assessment
21 St. Peters-burg (Russian Federation)
COUNCIL Council
23 San Remo (Italy) TC 8/SC 12 Ships and marine technology/Ships and marine technology - Large yachts
23-24 Paris (France) PC 277 Sustainable purchasing
23-27 Kobe (Japan) JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)
23-27 Milan (Italy) TC 120 Leather
23-27 Milan (Italy) TC 120/SC 1 Leather/Raw hides and skins, including pickled pelts
23-27 Milan (Italy) TC 120/SC 2 Leather/Tanned leather
23-27 Milan (Italy) TC 120/SC 3 Leather/Leather products
23-27 Vienna (Austria) TC 218 Timber
23-27 Chicago (USA) TC 262 Risk management
24-25 Beijing (China) TC 265 Carbon dioxide capture, transporta-tion, and geological storage
24-26 Gaithersburg (USA)
TC 172/SC 1 Optics and photon-ics/Fundamental standards
25-26 Oslo (Norway) TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries
25-27 Tokyo (Japan) TC 267 Facilities management
26 Freiburg (Germany)
TC 180/SC 1 Solar energy/Climate - Measurement and data
18 ISO Update, Supplement to ISO Focus -- September 2013
26 Freiburg (Germany)
TC 180/SC 4 Solar energy/Systems - Thermal perfor-mance, reliability and durability
26-27 Rotterdam (Netherlands)
TC 260 Human resource management
26-27 Toulouse (France)
TC 264 Fireworks
27 Seoul (Korea, Republic of)
TC 44/SC 12 Welding and allied processes/Soldering materials
27 Bromont (Québec) (Canada)
TC 153/SC 1 Valves/Design, manu-facture, marking and testing
27 Freiburg (Germany)
TC 180 Solar energy
27 Helsinki (Finland) TC 213 Dimensional and geometrical product specifications and verification
29 Jeju (Korea, Republic of)
TC 201/SC 6 Surface chemi-cal analysis/Sec-ondary ion mass spectrometry
September-October 2013
30-4 Kista (Stock-holm) (Sweden)
JTC 1/SC 25 Information technolo-gy/Interconnection of information technol-ogy equipment
30-4 Stockholm (Sweden)
PC 248 Project committee: Sustainability criteria for bioenergy
30-1 Tampere (Finland)
TC 23/SC 17 Tractors and machin-ery for agriculture and forestry/Manu-ally portable forest machinery
30-2 Berlin (Germany) TC 34/SC 15 Food products/Coffee
30-4 Stockholm (Sweden)
TC 148 Sewing machines
October 2013
2-3 Tampere (Finland)
TC 23/SC 15 Tractors and machin-ery for agriculture and forestry/Machinery for forestry
2-3 St. John, Newfoundland (Canada)
TC 67/SC 8 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Arctic operations
3-4 Chantilly (USA) TC 58/SC 2 Gas cylinders/Cylin-der fittings
5 Incheon (Korea, Republic of)
TC 106 Dentistry
6-11 Kobe (Japan) TC 204 Intelligent transport systems
7 Berlin (Germany) TC 10/SC 10 Technical product documentation/Process plant documentation
7 Istanbul (Turkey) TC 38/SC 1 Textiles/Tests for coloured textiles and colorants
7-8 Milan (Italy) TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes
7-8 Sparks, Nevada (USA)
TC 209 Cleanrooms and as-sociated controlled environments
7-8 Stockholm (Sweden)
TC 238 Solid biofuels
7-9 Tokyo (Japan) TC 70 Internal combustion engines
7-9 Tokyo (Japan) TC 70/SC 8 Internal combus-tion engines/Ex-haust gas emission measurement
7-9 Istanbul (Turkey) TC 126 Tobacco and tobacco products
7-10 Paris (France) JPC 2 Joint Project Commit-tee - Energy efficiency and renewable energy sources - Common terminology
7-11 Beijing (China) CASCO Committee on con-formity assessment
7-11 Cambridge, Massachusetts (USA)
TC 121/SC 4 Anaesthetic and res-piratory equipment/Terminology and semantics
7-11 Oslo (Norway) TC 138 Plastics pipes, fittings and valves for the transport of fluids
7-11 Colorado Springs (USA)
TC 247 Fraud countermeas-ures and controls
8 Istanbul (Turkey) TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests
8 Boulder (USA) TC 202/SC 1 Microbeam analysis/Terminology
8-9 Berlin (Germany) TC 263 Coalbed methane (CBM)
8-10 Berlin (Germany) TC 59/SC 8 Buildings and civil engineering works/Sealants
8-10 Boulder (USA) TC 202 Microbeam analysis
9 Istanbul (Turkey) TC 38/SC 23 Textiles/Fibres and yarns
9 Oslo (Norway) TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies
9 Oslo (Norway) TC 138/SC 6 Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for all applications
9 Boulder (USA) TC 202/SC 2 Microbeam analy-sis/Electron probe microanalysis
9 Boulder (USA) TC 202/SC 3 Microbeam analysis/Analytical electron microscopy
9-10 Seogwipo-si (Korea, Repub-lic of)
TC 159 Ergonomics
10 Lyon (France) TC 22/SC 5 Road vehicles/Engine tests
10 Istanbul (Turkey) TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics
ISO Update, Supplement to ISO Focus -- September 2013 19
10 Oslo (Norway) TC 138/SC 3 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial applications
10 Oslo (Norway) TC 138/SC 5 Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications
10 Oslo (Norway) TC 138/SC 7 Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary equipment of plastics materials
10 Boulder (USA) TC 202/SC 4 Microbeam analysis/Scanning electron microscopy (SEM)
11 Istanbul (Turkey) TC 38 Textiles
11 Berlin (Germany) TC 59/SC 13 Buildings and civil engineering works/Organization of information about construction works
11 Garching (Germany)
TC 60 Gears
11 Garching (Germany)
TC 60/SC 1 Gears/Nomenclature and wormgearing
11 Garching (Germany)
TC 60/SC 2 Gears/Gear capacity calculation
11 Venice (Italy) TC 146/SC 2 Air quality/Workplace atmospheres
11 Jeju (Korea, Republic of)
TC 159/SC 5 Ergonomics/Ergo-nomics of the physi-cal environment
13-17 London (United Kingdom)
TC 59/SC 15 Buildings and civil engineering works/Performance descrip-tion of houses
14-15 Troy (USA) TC 22/SC 11 Road vehicles/Safety glazing materials
14-15 Frankfurt (Germany)
TC 39/SC 10 Machine tools/Safety
14-15 Paris (France) TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding
14-15 Brussels (Belgium)
TC 122/SC 4 Packaging/Packaging and environment
14-17 Charlottenlund (Denmark)
TC 46/SC 8 Information and documentation/Quality - Statistics and performance evaluation
14-17 Stuttgart (Germany)
TC 165 Timber structures
14-18 Paris (France) PC 271 Compliance manage-ment systems
14-18 Seoul (Korea, Republic of)
TC 108 Mechanical vibration, shock and condition monitoring
14-18 Sydney (Australia)
TC 157 Non-systemic con-traceptives and STI barrier prophylactics
15 Halifax (Canada) TC 31/SC 6 Tyres, rims and valves/Off-the-road tyres and rims
15 Paris (France) TC 44/SC 5 Welding and allied processes/Testing and inspection of welds
15 Paris (France) TC 44/SC 7 Welding and allied processes/Represen-tation and terms
15-16 Paris (France) TC 2/SC 7 Fasteners/Reference standards
15-18 Berlin (Germany) TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments
16 Paris (France) TC 2/SC 11 Fasteners/Fasteners with metric external thread
16 Halifax (Canada) TC 31/SC 7 Tyres, rims and valves/Industrial tyres and rims
16 La Plaine St-Denis (France)
TC 44/SC 9 Welding and allied processes/Health and safety
16 Jeju (Korea, Republic of)
TC 123/SC 2 Plain bearings/Materi-als and lubricants, their properties, characteristics, test methods and testing conditions
16 Jeju (Korea, Republic of)
TC 123/SC 3 Plain bearings/Dimen-sions, tolerances and construction details
16-18 Munich (Germany)
TC 58/SC 3 Gas cylinders/Cylin-der design
16-25 Beijing (China) TC 184/SC 2 Automation systems and integration/Robots and robotic devices
17 Paris (France) TC 2/SC 14 Fasteners/Surface coatings
17 Halifax (Canada) TC 31/SC 5 Tyres, rims and valves/Agricultural tyres and rims
17 London (United Kingdom)
TC 59/SC 3 Buildings and civil engineering works/Functional/user requirements and performance in build-ing construction
17 Jeju (Korea, Republic of)
TC 123/SC 5 Plain bearings/Quality analysis and assurance
17 Jeju (Korea, Republic of)
TC 123/SC 6 Plain bearings/Terms and common items
17 Milan (Italy) TC 216 Footwear
17-18 Paris (France) TC 44 Welding and allied processes
18 Paris (France) TC 2 Fasteners
18 Paris (France) TC 2/SC 12 Fasteners/Fasteners with metric internal thread
18 Berlin (Germany) TC 22/SC 7 Road vehicles/Injec-tion equipment and filters for use on road vehicles
20 ISO Update, Supplement to ISO Focus -- September 2013
18 London (United Kingdom)
TC 59/SC 2 Buildings and civil engineering works/Terminology and harmonization of languages
18 Jeju (Korea, Republic of)
TC 123 Plain bearings
18 Jeju (Korea, Republic of)
TC 123/SC 7 Plain bearings/Spe-cial types of plain bearings
19-20 Jacksonville (USA)
TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization
21 Singapore (Singapore)
TC 8/SC 3 Ships and marine technology/Piping and machinery
21 Singapore (Singapore)
TC 8/SC 6 Ships and ma-rine technology/Navigation and ship operations
21 Singapore (Singapore)
TC 8/SC 7 Ships and marine technology/Inland navigation vessels
21 Singapore (Singapore)
TC 8/SC 11 Ships and marine technology/Inter-modal and Short Sea Shipping
21 Berlin (Germany) TC 147/SC 1 Water quality/Terminology
21-25 London (United Kingdom)
PC 283 Occupational health and safety man-agement systems - Requirements
21-25 Singapore (Singapore)
TC 8 Ships and marine technology
21-25 Hudders-field (United Kingdom)
TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
21-25 Berlin (Germany) TC 154 Processes, data elements and documents in com-merce, industry and administration
21-25 Sao Paulo (Brazil)
TC 181 Safety of toys
21-25 Sydney (Australia)
TC 215 Health informatics
22-24 Stockholm (Sweden)
TC 20/SC 9 Aircraft and space vehicles/Air cargo and ground equipment
23 Paris (France) TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete
23 Berlin (Germany) TC 22/SC 9 Road vehicles/Vehicle dynamics and road-holding ability
23 London (United Kingdom)
TC 25 Cast irons and pig irons
23 Courbevoie, Paris (France)
TC 111 Round steel link chains, chain slings, components and accessories
23 Berlin (Germany) TC 173/SC 2 Assistive products for persons with disabil-ity/Classification and terminology
23 Berlin (Germany) TC 173/SC 7 Assistive products for persons with disabil-ity/Accessible design
23 Tokyo (Japan) TC 206 Fine ceramics
24 Paris (France) TC 17/SC 7 Steel/Methods of testing (other than mechanical tests and chemical analysis)
24 Vienna (Austria) TC 83 Sports and other recreational facilities and equipment
24 Berlin (Germany) TC 147/SC 5 Water quality/Biologi-cal methods
24 Berlin (Germany) TC 147/SC 6 Water quality/Sampling (general methods)
24-25 Sarajevo (Bosnia and Herzegovina)
TC 34/SC 12 Food products/Sen-sory analysis
24-25 Berlin (Germany) TC 173 Assistive products for persons with disability
25 Vienna (Austria) TC 22/SC 22 Road vehicles/Motorcycles
25 Vienna (Austria) TC 22/SC 23 Road vehicles/Mopeds
25 Boston (USA) TC 92/SC 4 Fire safety/Fire safety engineering
25 Tokyo (Japan) TC 146/SC 1 Air quality/Stationary source emissions
25 Berlin (Germany) TC 147/SC 2 Water quality/Physi-cal, chemical and biochemical methods
25 Berlin (Germany) TC 147/SC 4 Water quality/Micro-biological methods
26 Berlin (Germany) TC 147 Water quality
28 Karlsruhe (Germany)
TC 117 Fans
28-29 Düsseldorf (Germany)
TC 17/SC 4 Steel/Heat treatable and alloy steels
28-31 Bali (Indonesia) TC 45/SC 1 Rubber and rubber products/Hoses (rub-ber and plastics)
29 Kochi (India) TC 234 Fisheries and aquaculture
30 Prague (Czech Republic)
TC 266 Biomimetics
31 Bali (Indonesia) TC 45/SC 2 Rubber and rubber products/Testing and analysis
31 Bali (Indonesia) TC 45/SC 4 Rubber and rubber products/Products (other than hoses)
October-December 2013
7-11 Oslo (Norway) TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (includ-ing land drainage)
October-November 2013
28-1 Bali (Indonesia) TC 45 Rubber and rubber products
28-1 Cambridge, Massachusetts (USA)
TC 121/SC 2 Anaesthetic and res-piratory equipment/Airways and related equipment
28-2 Berlin (Germany) TC 130 Graphic technology
ISO Update, Supplement to ISO Focus -- September 2013 21
November 2013
1 Bali (Indonesia) TC 45/SC 3 Rubber and rubber products/Raw materi-als (including latex) for use in the rubber industry
2-9 Porto (Portugal) TC 176 Quality management and quality assurance
2-9 Porto (Portugal) TC 176/SC 1 Quality management and quality assur-ance/Concepts and terminology
2-9 Porto (Portugal) TC 176/SC 3 Quality management and quality assur-ance/Supporting technologies
3-8 Gyeongju (Ko-rea, Republic of)
TC 184/SC 4 Automation systems and integration/Indus-trial data
4-8 Sydney (Australia)
TC 34/SC 17 Food products/Man-agement systems for food safety
4-8 Porto (Portugal) TC 176/SC 2 Quality management and quality assur-ance/Quality systems
4-8 Bangkok (Thailand)
TC 217 Cosmetics
4-8 Nairobi (Kenya) TC 285 Clean cookstoves and clean cooking solutions
4-9 Perros-Guirec (France)
JTC 1 Information technology
6-8 Paris (France) TC 275 Sludge recovery, recycling, treatment and disposal
7 Vienna (Austria) TC 83/SC 4 Sports and other rec-reational facilities and equipment/Snows-ports equipment
7 Okinawa (Japan) TC 201/SC 1 Surface chemical analysis/Terminology
7 Okinawa (Japan) TC 201/SC 2 Surface chemical analysis/General procedures
7 Okinawa (Japan) TC 201/SC 9 Surface chemical analysis/Scanning probe microscopy
7-9 Okinawa (Japan) TC 201 Surface chemical analysis
8 Delft (Netherlands)
TC 92/SC 1 Fire safety/Fire initia-tion and growth
8 Shenzen (China) TC 160 Glass in building
8 Shenzen (China) TC 160/SC 1 Glass in build-ing/Product considerations
8 Shenzen (China) TC 160/SC 2 Glass in building/Use considerations
8 Okinawa (Japan) TC 201/SC 3 Surface chemi-cal analysis/Data management and treatment
8 Okinawa (Japan) * TC 201/SC 4 Surface chemi-cal analysis/Depth profiling
8 Okinawa (Japan) TC 201/SC 7 Surface chemical analysis/Electron spectroscopies
8 Washington, D.C (USA)
TC 227 Springs
9 Okinawa (Japan) TC 201/SC 8 Surface chemical analysis/Glow dis-charge spectroscopy
11 Mexico City (Mexico)
TC 113/SC 1 Hydrometry/Velocity area methods
11-15 Mexico City (Mexico)
TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices
11-15 Tokyo (Japan) TC 98 Bases for design of structures
11-15 Mexico City (Mexico)
TC 113 Hydrometry
12-13 Guangzhou (China)
TC 137 Footwear sizing des-ignations and marking systems
13 Tokyo (Japan) TC 110/SC 1 Industrial trucks/Gen-eral terminology
13 Mexico City (Mexico)
TC 113/SC 2 Hydrometry/Flow measurement structures
14 Tokyo (Japan) TC 110/SC 2 Industrial trucks/Safety of powered industrial trucks
14 Mexico City (Mexico)
TC 113/SC 5 Hydrometry/In-struments, equip-ment and data management
14 Mexico City (Mexico)
TC 113/SC 6 Hydrometry/Sediment transport
14-15 Redlands (USA) TC 211 Geographic in-formation/Geomatics
15 Tokyo (Japan) TC 110 Industrial trucks
15 Mexico City (Mexico)
TC 113/SC 8 Hydrometry/Ground water
15 Belo Horizonte (Brazil)
TC 229 Nanotechnologies
18 Berlin (Germany) TC 20/SC 4 Aircraft and space vehicles/Aerospace fastener systems
18 Mumbay (India) TC 135/SC 8 Non-destructive test-ing/Infrared thermog-raphy for non-de-structive testing
18-20 Berlin (Germany) TC 20 Aircraft and space vehicles
18-21 Exton (USA) TC 84 Devices for adminis-tration of medicinal products and intra-vascular catheters
19-20 Tokyo (Japan) * TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres
19-21 Singapore (Singapore)
TC 212 Clinical laboratory testing and in vitro di-agnostic test systems
20-22 Tokyo (Japan) * TC 269 Railway applications
27 Milan (Italy) TC 221 Geosynthetics
30 Miami (USA) TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining
Berlin (Germany) ** TC 41 Pulleys and belts (including veebelts)
December 2013
22 ISO Update, Supplement to ISO Focus -- September 2013
1-5 Tel Aviv (Israel) ** TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems
4-5 La Plaine St-Denis (France)
* TC 279 Innovation process: interaction, tools and methods
5 Brussels (Belgium)
TC 94/SC 3 Personal safety -- Protective clothing and equipment/Foot protection
5-6 Paris (France) * TC 197 Hydrogen technologies
9-11 Geneva (Switzerland)
PC 284 Management System for Quality of Private Security Company (PSC) Operations - Requirements with Guidance
11 Frankfurt (Germany)
TC 270 Plastics and rubber machines
11-12 Kyoto (Japan) TC 281 Fine Bubble Technology
12-13 New York (USA) TC 171/SC 2 Document manage-ment applications/Application issues
12-13 Berlin (Germany) * TC 276 Biotechnology
16-20 Winterthur (Switzerland)
** TC 121/SC 3 Anaesthetic and res-piratory equipment/Lung ventilators and related equipment
Month unknown 2013
Bratislava (Slovakia)
** TC 44/SC 11 Welding and allied processes/Qualifica-tion requirements for welding and allied processes personnel
January 2014
13-16 New Delhi (India) * TC 69/SC 4 Applications of statis-tical methods/Appli-cations of statistical methods in process management
23 Paris (France) TC 17/SC 3 Steel/Steels for struc-tural purposes
28-31 Sydney (Australia)
* TC 71 Concrete, reinforced concrete and pre-stressed concrete
February 2014
10-11 Paris (France) * TC 44/SC 3 Welding and allied processes/Welding consumables
10-14 Paris (France) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders
(South America) ** JTC 1/SC 35 Information technol-ogy/User interfaces
(Sweden) ** TC 213 Dimensional and geometrical product specifications and verification
March 2014
11-14 London (United Kingdom)
TC 118 Compressors and pneumatic tools, ma-chines and equipment
11-14 London (United Kingdom)
* TC 118/SC 3 Compressors and pneumatic tools, machines and equip-ment/Pneumatic tools and machines
11-14 London (United Kingdom)
* TC 118/SC 6 Compressors and pneumatic tools, machines and equip-ment/Air compressors and compressed air systems
13 London (United Kingdom)
* TC 118/SC 1 Compressors and pneumatic tools, machines and equipment/Process compressors
13 London (United Kingdom)
* TC 118/SC 4 Compressors and pneumatic tools, machines and equip-ment/Compressed air purity specification and compressed air treatment equipment
23-27 Warsaw (Poland) * TC 107 Metallic and other inorganic coatings
23-27 Warsaw (Poland) * TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
23-27 Warsaw (Poland) * TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
23-27 Warsaw (Poland) * TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests
23-27 Warsaw (Poland) * TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings
27-28 Geneva (Switzerland)
* COUNCIL Council
(Europe) ** TC 134 Fertilizers and soil conditioners
March-April 2014
31-4 Vienna (Austria) ** PC 271 Compliance manage-ment systems
1st Quarter 2014
(Netherlands) ** TC 257 General technical rules for determina-tion of energy savings in renovation projects, industrial enterprises and regions
April 2014
7-11 Delft (Netherlands)
* TC 6 Paper, board and pulps
7-11 Delft (Netherlands)
* TC 6/SC 2 Paper, board and pulps/Test methods and quality specifica-tions for paper and board
7-11 Lund (Sweden) * TC 92 Fire safety
7-11 Vitoria (Brazil) * TC 102 Iron ore and direct reduced iron
7-11 Vitoria (Brazil) * TC 102/SC 1 Iron ore and direct re-duced iron/Sampling
ISO Update, Supplement to ISO Focus -- September 2013 23
7-11 Vitoria (Brazil) * TC 102/SC 2 Iron ore and direct reduced iron/Chemi-cal analysis
7-11 Vitoria (Brazil) * TC 102/SC 3 Iron ore and direct reduced iron/Physical testing
7-11 Bologna (Italy) * TC 110/SC 4 Industrial trucks/Rough-terrain trucks
7-11 Amsterdam (Netherlands)
* TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
8-9 (Japan) ** TC 199 Safety of machinery
8-10 (Brazil) ** TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems
9-11 Jeju (Korea, Republic of)
* TC 112 Vacuum technology
14-15 Hong Kong (Hong Kong, China)
* JTC 1/SC 27 Information tech-nology/IT Security techniques
23-24 (Europe) ** TC 167 Steel and aluminium structures
24-25 Bangkok (Thailand)
** TC 34 Food products
Berlin (Germany) ** TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals
Berlin (Germany) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils
May 2014
5-9 Washington, D.C (USA)
* TC 46 Information and documentation
5-9 Washington, D.C (USA)
* TC 46/SC 9 Information and documentation/Identification and description
5-9 Washington, D.C (USA)
* TC 46/SC 11 Information and doc-umentation/Archives/records management
5-10 St. Petersburg, Florida (USA)
* TC 96 Cranes
8 Santa María de Lamas (Portugal)
** TC 87 Cork
8 Wiesbaden (Germany)
* TC 226 Materials for the production of primary aluminium
9-16 London (United Kingdom)
* TC 10 Technical product documentation
9-16 London (United Kingdom)
* TC 10/SC 1 Technical product documentation/Basic conventions
9-16 London (United Kingdom)
* TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation
12-16 Milan (Italy) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
12-16 London (United Kingdom)
** TC 68/SC 4 Financial services/Securities and related financial instruments
12-16 Zhangjiajie (China)
** TC 195 Building construc-tion machinery and equipment
12-16 Zhangjiajie (China)
** TC 195/SC 1 Building construc-tion machinery and equipment/Machinery and equipment for concrete work
14-16 Rosslyn (USA) ** TC 145 Graphical symbols
14-16 Rosslyn (USA) ** TC 145/SC 1 Graphical symbols/Public information symbols
14-16 Rosslyn (USA) ** TC 145/SC 2 Graphical symbols/Safety identification, signs, shapes, sym-bols and colours
14-16 Rosslyn (USA) ** TC 145/SC 3 Graphical symbols/Graphical symbols for use on equipment
15 London (United Kingdom)
TC 68 Financial services
15-20 Berlin (Germany) * TC 34/SC 5 Food products/Milk and milk products
19-23 Berlin (Germany) ** TC 43 Acoustics
19-23 Berlin (Germany) ** TC 43/SC 1 Acoustics/Noise
19-23 Berlin (Germany) ** TC 43/SC 2 Acoustics/Building acoustics
19-24 Karuizawa (Japan)
** TC 215 Health informatics
20-21 Prague (Czech Republic)
* TC 122 Packaging
21-22 (USA) ** TC 22/SC 3 Road vehicles/Elec-trical and electronic equipment
23 Toronto (Canada) * TC 268 Sustainable develop-ment in communities
23-24 Beijing (China) ** TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization
26-29 Kyoto (Japan) * TC 249 Traditional chinese medicine
27-30 (USA) ** TC 156 Corrosion of metals and alloys
June 2014
1-6 (Sweden) ** TC 127 Earth-moving machinery
5-6 Berlin (Germany) * TC 211 Geographic in-formation/Geomatics
9-14 Moscow (Rus-sian Federation)
* TC 85/SC 2 Nuclear energy, nuclear technologies, and radiological pro-tection/Radiological protection
16-20 Incheon (Korea, Republic of)
* TC 121 Anaesthetic and res-piratory equipment
17-18 Stockholm (Sweden)
* TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers
17-18 Berlin (Germany) * TC 220 Cryogenic vessels
23-27 London (United Kingdom)
* TC 193 Natural gas
Düsseldorf (Germany)
** TC 17/SC 17 Steel/Steel wire rod and wire products
London (United Kingdom)
** TC 193/SC 1 Natural gas/Analysis of natural gas
24 ISO Update, Supplement to ISO Focus -- September 2013
July 2014
8-11 Boulder (USA) * REMCO Committee on refer-ence materials
September 2014
8-9 Madrid (Spain) * JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
8-12 Paris (France) ** TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machine systems
10-12 Rio de Janeiro (Brazil)
* GA General Assembly
13 Rio de Janeiro (Brazil)
* COUNCIL Council
18-19 Manches-ter (United Kingdom)
** TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization
20 Manches-ter (United Kingdom)
** TC 281 Fine Bubble Technology
22-26 Durban (South Africa)
** TC 146 Air quality
22-26 Durban (South Africa)
** TC 146/SC 1 Air quality/Stationary source emissions
24-25 Geneva (Switzerland)
* CASCO Committee on con-formity assessment
Stockholm (Sweden)
** TC 17/SC 11 Steel/Steel castings
(USA) ** TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis
Milan (Italy) ** TC 39/SC 4 Machine tools/Wood-working machines
Seattle (USA) ** TC 89 Wood-based panels
Montreal (Canada)
** TC 213 Dimensional and geometrical product specifications and verification
3rd Quarter 2014
London (United Kingdom)
** TC 48 Laboratory equipment
2nd-3rd Quarter 2014
Ljimuden (Netherlands)
** TC 17/SC 9 Steel/Tinplate and blackplate
October 2014
5-10 Berlin (Germany) ** TC 215 Health informatics
20-24 Nunspeet (Netherlands)
TC 149/SC 1 Cycles/Cycles and major sub-assemblies
20-24 Berlin (Germany) * TC 190 Soil quality
20-24 Berlin (Germany) * TC 190/SC 1 Soil quality/Evaluation of criteria, terminol-ogy and codification
20-24 Berlin (Germany) * TC 190/SC 2 Soil quality/Sampling
20-24 Berlin (Germany) * TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics
20-24 Berlin (Germany) * TC 190/SC 4 Soil quality/Biological methods
20-24 Berlin (Germany) * TC 190/SC 5 Soil quality/Physical methods
20-24 Berlin (Germany) * TC 190/SC 7 Soil quality/Soil and site assessment
23-24 (South Africa) ** TC 178 Lifts, escalators and moving walks
Miami (USA) ** TC 44/SC 3 Welding and allied processes/Welding consumables
Toronto (Canada) ** TC 59 Buildings and civil engineering works
Prague (Czech Republic)
** TC 135 Non-destructive testing
November 2014
3-7 Cape Town (South Africa)
** TC 45 Rubber and rubber products
4th Quarter 2014
(Portugal) ** TC 34/SC 4 Food products/Cere-als and pulses
2nd Semester 2014
Madrid (Spain) ** TC 34/SC 7 Food products/Spic-es, culinary herbs and condiments
Month unknown 2014
(Australia) ** TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition
(Brazil) ** TC 28 Petroleum products and lubricants
Beijing (China) ** TC 36 Cinematography
(Germany) ** TC 37 Terminology and other language and content resources
(Japan) ** TC 44 Welding and allied processes
Nairobi (Kenya) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids
(United Kingdom)
** TC 142 Cleaning equipment for air and other gases
Suzhou (China) ** TC 164 Mechanical testing of metals
February 2015
3-13 London (United Kingdom)
* TC 213 Dimensional and geometrical product specifications and verification
St. Petersburg, Florida (USA)
** TC 115 Pumps
1st Quarter 2015
Foshan (China) ** TC 107 Metallic and other inorganic coatings
Foshan (China) ** TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
Foshan (China) ** TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
Foshan (China) ** TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests
ISO Update, Supplement to ISO Focus -- September 2013 25
Foshan (China) ** TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings
April 2015
(France) ** TC 29 Small tools
(France) ** TC 29/SC 9 Small tools/Tools with cutting edges made of hard cutting materials
Tienjin (China) ** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
(Europe) ** TC 215 Health informatics
May 2015
18-22 London (United Kingdom)
** TC 4 Rolling bearings
June 2015
Beijing (China) ** TC 46 Information and documentation
2nd Quarter 2015
(China) ** TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments
September 2015
14-25 Berlin (Germany) * TC 213 Dimensional and geometrical product specifications and verification
3rd Quarter 2015
Sao Paulo (Brazil)
** TC 215 Health informatics
November 2015
(China) ** JTC 1 Information technology
Month unknown 2015
(South Africa) ** REMCO Committee on refer-ence materials
(Switzerland) ** TC 17/SC 17 Steel/Steel wire rod and wire products
(Finland) ** TC 44 Welding and allied processes
(France) ** TC 45 Rubber and rubber products
(Russian Federation)
** TC 96 Cranes
Berlin (Germany) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids
(Japan) ** TC 142 Cleaning equipment for air and other gases
(China) ** TC 155 Nickel and nickel alloys
(United Kingdom)
** TC 164 Mechanical testing of metals
(Austria) ** TC 190 Soil quality
February 2016
(USA) ** TC 213 Dimensional and geometrical product specifications and verification
April 2016
Seoul (Korea, Republic of)
** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
(Australia) ** TC 178 Lifts, escalators and moving walks
November 2016
(Norway) ** JTC 1 Information technology
Month unknown 2016
(Russian Federation)
** REMCO Committee on refer-ence materials
(Australia) ** TC 44 Welding and allied processes