Data Quality on Mars - ISO 80000 and other Standards - Apache Big Data Europe 2015
ISO standards – how will they arrive in Europe
description
Transcript of ISO standards – how will they arrive in Europe
© MSA 2014
Because every life has a purpose…
ISO standards – how will they arrive in Europe
Thomas Kruegerke/March 2014Chairman CEN/TC 79
1
MSAsafety.com© MSA 2014
ISO documents for RPD released so far:
General (2)
ISO 16972:2010 Terms, definitions, graphical symbols and units of measurement
ISO/TS 16974:2011 Marking and information supplied by the manufacturer
MSAsafety.com© MSA 2014
ISO documents for RPD released so far:
Human Factors (7)ISO/TS 16976-1:2007 Metabolic rates and respiratory flow rates
ISO/TS 16976-2:2010 Anthropometrics
ISO/TS 16976-3:2011 Physiological responses and limitations of oxygen and limitations of carbon dioxide in the breathing environment
ISO/TS 16976-4:2012 Work of breathing and breathing resistance: Physiologically based limits
ISO/TS 16976-5:2013 Thermal effects
ISO/TS 16976-7:2013 Hearing and speech
ISO/TS 16976-8:2013 Ergonomic factors
MSAsafety.com© MSA 2014
ISO documents for RPD released so far:
Test methods (4)
ISO 16900-2:2009 Test method - Determination of breathing resistance
ISO 16900-3:2012 Test method - Determination of particle filter penetration
ISO 16900-4:2011 Test method - Determination of gas filter capacity, migration, desorption and carbon monoxide dynamic testing
ISO 16900-11:2013 Test method - Determination of field of vision
MSAsafety.com© MSA 2014
ISO documents for RPD released so far:
Performance (1)
ISO 17420-3:2012 Performance requirements —Thread connection
MSAsafety.com© MSA 2014
ISO documents for RPD under development:
Human Factors (1)ISO/TS 16976-6 Psychophysiological effects
MSAsafety.com© MSA 2014
ISO documents for RPD under development:Test methods (9)ISO 16900-1 Determination of inward leakage
ISO 16900-6 Mechanical resistance/strength of components and connections
ISO 16900-8 Measurement of RPD air flow ratesISO 16900-9 Determination of the carbon dioxide content of inhaled
airISO 16900-10 Resistance to ignition, flame, radiant heat and heatISO 16900-11 Determination of field of visionISO 16900-12 Determination of volume-averaged work of breathing
and peak respiratory pressure
ISO 16900-13 RPD using regenerated breathable gas and special application mining escape RPD
ISO 16900-14 Measurement of sound level
MSAsafety.com© MSA 2014
ISO documents for RPD under development:
General (1)ISO/TS 16973 Classification for RPD, excluding RPD for
underwater application
MSAsafety.com© MSA 2014
ISO documents for RPD under development:
RPD programme (3)ISO 16975-1 Selection, use and maintenance — Establishing and
implementing a respiratory protective device programme
ISO 16975-2 Selection, use and maintenance — Overview to establishing and implementing a respiratory protective device programme
ISO 16975-3 Selection, use and maintenance —Part 3: Fit testing procedures
MSAsafety.com© MSA 2014
ISO documents for RPD under development:
RPD Performance (2)ISO 17420-1 Supplied breathable gas devices
ISO 17420-2 Filtering devices
MSAsafety.com© MSA 2014
ISO to EN
• ISO Standards are voluntary• EN standards are „mandatory“ under the PPE
Directive• No conflicting Standards are allowed
MSAsafety.com© MSA 2014
Committee Scope Secretariate Chairperson / Convenor
TC 79 RPD DE Thomas Kruegerke
SC1 General GB Charles Tracey
WG4 Filtering RPD DE Lars Ronner
WG6 Supplied breathable gas RPD DE Wolfgang Drews
SC7 Diving RPD DE Ian Maxwell
SC9 Test methods GB Graham Bostock
Proposed Structure of CEN/TC 79
MSAsafety.com© MSA 2014
Transition
period
EN ISO Standards
Evaluation period
3 years 3 years
today's EN Standards
ISO Standardsrevised ISO Standards
Revision
Roadmap
UAP voting
??? years
MSAsafety.com© MSA 2014
Roadmap – to do‘s
• Pre-Evaluation period:◘ Check if PPE directive requirements are covered
(key word: “Annex ZA”), if necessary attempt to influence ISO prior to FDIS
◘ Identify affected ENs
MSAsafety.com© MSA 2014
Roadmap – to do‘s
Evaluation period:• Impact assessment (to be done by a task group)• Guide 17: SME (to be done by a task group)• Readiness of test houses (to be done by WG Test
methods)• Gap analysis: is ISO covering all aspects of todays EN
Standards (ISO 17420, ISO 16900, ISO 16975) (to be done by the appropriate WG for products)
• Evaluation for the appropriate duration for the transition period (to be done by a task group)
MSAsafety.com© MSA 2014
Transition
period
EN ISO Standards
Evaluation period
3 years 3 years
today's EN Standards
ISO Standardsrevised ISO Standards
Revision
Roadmap
UAP voting
??? years