ISO Library

Org ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

Doc # 1 2 3 4 5-1 5-2 5-3 5-4 6 7-1 CORR 1 7-1 7-2 8 9 11 14 15 16 17 18 21 22 23 25 26 28

Title Geometrical Product Specifications (GPS) - Standard Reference Temperature for Geometrical Product Specification and Verification Second Edition Textiles - Designation of the Direction of Twist in Yarns and Related Products First Edition Preferred Numbers - Series of Preferred Numbers First Edition; PNS 399: 1991 Information and Documentation - Rules for the Abbreviation of Title Words and Titles of Publications Third Edition Photography - Density Measurements - Part 1: Terms, Symbols and Notations Photgraphie - Mesurage des densites - Partie 1: Termes, symboles et notations First Edition Photography - Density Measurements - Part 2: Geometric Conditions for Transmission Density Fourth Edition Photography - Density Measurements - Part 3: Spectral Conditions Second Edition Photography - Density Measurements - Part 4: Geometric Conditions for Reflection Density Second Edition Photography - Black-and-White Pictorial Still Camera Negative Film/Process Systems - Determination of ISO Speed Second Edition Pipe Threads Where Pressure-Tight Joints Are Made on the Threads - Part 1: Dimensions, Tolerances and Designation Third Edition Pipe Threads Where Pressure-Tight Joints Are Made on the Threads - Part 1: Dimensions, Tolerances and Designation Third Edition Pipe Threads Where Pressure-Tight Joints Are Made on the Threads - Part 2: Verification by Means of Limit Gauges Second Edition Documentation - Presentation of Periodicals First Edition; Erratum-1979 Information and Documentation - Transliteration of Cyrillic Characters into Latin Characters - Slavic and Non-Slavic Languages Second Edition Aircraft - Ground Pressure Testing Connections for Pressure Cabins Second Edition Straight-Sided Splines for Cylindrical Shafts with Internal Centering - Dimensions, Tolerances and Verification Second Edition; JIS B 1601:1996 Rolling Bearings - Radial Bearings - Boundary Dimensions, General Plan Second Edition Acoustics - Standard Tuning Frequency (Standard Musical Pitch) First Edition (NZS/ISO 16: 1975) First Edition; NZS/ISO 16: 1975 Guide to the Use of Preferred Numbers and of Series of Preferred Numbers First Edition; PNS 400: 1991 Documentation - Contents List of Periodicals First Edition Shipbuilding - Inland Navigation - Cable-Lifters for Stud-Link Anchor Chains Second Edition Belt Drives - Flat Transmission Belts and Corresponding Pulleys - Dimensions and Tolerances Second Edition Cinematography - Camera Usage of 35 mm Motion-Picture Film - Specifications Second Edition Cinematography - Camera Usage of 16 mm Motion-Picture Film - Specifications Second Edition Cinematography - Projector Usage of 16 mm Motion-Picture Films for Direct Front Projection - Specifications Third Edition Cinematography - Camera Usage of 8 mm Type R Motion-Picture Film - Specifications First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

31-0 31-5 31-6 31-8 31-9 31-10 31-11 31-12 31-13 32 34-1 34-2 35 AMD 1 35 36 37 43 44 45 46 48 49 53 54 60 61 62 65 68-1 68-2

Quantities and Units - Part 0: General Principles Third Edition; Amendment 1: 12/15/1998; Amendment 2: 10/1/2005 Quantities and Units - Part 5: Electricity and Magnetism Second Edition; Corrected and Reprinted: 05/15/1993; Amendment 1: 12/15/1998 Quantities and Units - Part 6: Light and Related Electromagnetic Radiations Third Edition; Amendment 1: 12/15/1998 Quantities and Units - Part 8: Physical Chemistry and Molecular Physics Third Edition; Amendment 1: 12/15/1998 Quantities and Units - Part 9: Atomic and Nuclear Physics Third Edition; Amendment 1: 12/15/1998 Quantities and Units - Part 10: Nuclear Reactions and Ionizing Radiations Third Edition; Amendment 1: 12/15/1998 Quantities and Units - Part 11: Mathematical Signs and Symbols for Use in the Physical Sciences and Technology Second Edition Quantities and Units - Part 12: Characteristic Numbers Third Edition; Amendment 1: 12/15/1998 Quantities and Units - Part 13: Solid State Physics Third Edition; Amendment 1: 12/15/1998 Gas Cylinders for Medical Use - Marking for Identification of Content First Edition; Erratum-1979 Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces Second Edition Rubber, vulcanized or thermoplastic Determination of tear strength Part 2: Small (Delft) test pieces Second Edition Natural rubber latex concentrate Determination of mechanical stability AMENDMENT 1: Precision data Fifth Edition Natural rubber latex concentrate Determination of mechanical stability Fifth Edition Rubber, Vulcanized or Thermoplastic - Determination of Adhesion to Textile Fabric Fourth Edition Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties Fourth Edition Aircraft - Jacking Pads First Edition Aerospace - Lever-Operated, Two-Position, ON/OFF Switches - Directions of Operation First Edition Aircraft - Pressure Refuelling Connections Second Edition Aircraft - Fuel Nozzle Grounding Plugs and Sockets First Edition Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) Fourth Edition Malleable Cast Iron Fittings Threaded to ISO 7-1 Second Edition; Corrigendum 1 02/15/1997 Cylindrical Gears for General and Heavy Engineering - Standard Basic Rack Tooth Profile Second Edition Cylindrical Gears for General Engineering and for Heavy Engineering - Modules Second Edition Plastics - Determination of Apparent Density of Material That Can Be Poured from a Specified Funnel Second Edition Plastics - Determination of Apparent Density of Moulding Material That Cannot Be Poured from a Specified Funnel First Edition Plastics - Determination of Water Absorption Second Edition Carbon Steel Tubes Suitable for Screwing in Accordance with ISO 7/1 Second Edition ISO General Purpose Screw Threads - Basic Profile Part 1: Metric Screw Threads First Edition; This Standard Together with ISO 682 Cancels and Replaces ISO 68 ISO General Purpose Screw Threads - Basic Profile Part 2: Inch Screw Threads First Edition; This Standard Together with ISO 68-1 Cancels and Replaces ISO 68

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

69 70 71 74 75-1 75-2 75-3 76 78-2 78-3 78-4 90-1 90-2 90-3 91-1 91-2 92 93-1 93-2 94 96-1 96-2 98 102

Cinematography - 16 mm Motion-Picture and Magnetic Film - Cutting and Perforating Dimensions Third Edition Cinematography - Monophonic 35 mm Negative Photographic Sound Record on 35 mm Motion-Picture Film - Position and Maximum Width Dimensions Second Edition Cinematography - 16 mm Negative Photographic Sound Record on 16 mm, 35/16 mm and 35/32 mm Motion-Picture Film - Positions and Dimensions First Edition Cinematography - Image Area Produced by Camera Aperture and Maximum Projectable Image Area on 8 mm Type R Motion-Picture Film - Positions and Dimensions First Edition Plastics - Determination of Temperature of Deflection under Load - Part 1: General Test Method Second Edition Plastics - Determination of Temperature of Deflection under Load - Part 2: Plastics and Ebonite Second Edition [Superseded By: JSA JIS K 7191-2, JSA JIS K 7191-2] Plastics - Determination of Temperature of Deflection under Load - Part 3: High Strength Thermosetting Laminates and Long-FibreReinforced Plastics Second Edition Rolling Bearings - Static Load Ratings Third Edition Chemistry - Layouts for Standards - Part 2: Methods of Chemical Analysis Second Edition Chemistry - Layouts for Standards - Part 3: Standard for Molecular Absorption Spectrometry First Edition Layouts for Standards - Part 4: Standard for Atomic Absorption Spectrometric Analysis First Edition Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 1: Open-Top Cans Second Edition Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 2: General Use Containers Second Edition Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 3: Aerosol Cans Second Edition Petroleum Measurement Tables - Part 1: Tables Based on Reference Temperatures of 15 Degrees C and 60 Degrees F Second Edition Petroleum Measurement Tables - Part 2: Tables Based on a Reference Temperature of 20 Degrees C First Edition Textile Machinery and Accessories - Spinning Machinery - Definition of Side (Left or Right) First Edition Textile Machinery and Accessories - Cylindrical Sliver Cans - Part 1: Main Dimensions Fourth Edition Textile Machinery and Accessories - Cylindrical Sliver Cans - Part 2: Spring Bottoms Third Edition Textile Machinery and Accessories - Spindle Gauges for Ring-Spinning and Ring-Doubling Frames Second Edition Textile Machinery and Accessories - Rings and Travellers for Ring Spinning and Ring Doubling Frames - Part 1: T-Rings and Their Appropriate Travellers First Edition Textile Machinery and Accessories - Rings and Travellers for Ring Spinning and Ring Doubling Frames - Part 2: HZCH-, HZ- and JRings and Their Appropriate Travellers First Edition Textile Machinery and Accessories - Spinning Preparatory and Spinning Machinery - Main Dimensions of Coverings for Top Rollers Third Edition Aircraft - Gravity Filling Orifices Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

104 105-A01 105-A02 105-A03 105-A04 105-A05 105-A06 105-A08 105-B01 105-B02 105-B03 105-B04 105-B05 105-B06 105-B08 105-C06 105-C07

Rolling Bearings - Thrust Bearings - Boundary Dimensions, General Plan Third Edition Textiles - Tests for Colour Fastness - Part A01: General Principles of Testing Fifth Edition; CEN EN 20105-A03: 1994; CEN EN ISO 105-A01: 1995; CEN EN 20105-A03: 1994; CEN EN ISO 105-A01: 1995 Textiles - Tests for Colour Fastness - Part A02: Grey Scale for Assessing Change in Colour Fourth Edition; Corrigendum 2: 10/1/2005 Textiles - Tests for Colour Fastness - Part A03: Grey Scale for Assessing Staining Fourth Edition; Corrigendum 2: 10/1/2005 Textiles - Tests for Colour Fastness - Part A04: Method for the Instrumental Assessment of the Degree of Staining of Adjacent Fabrics First Edition Textiles - Tests for Colour Fastness - Part A05: Instrumental Assessment of Change in Colour for Determination of Grey Scale Rating First Edition; Corrigendum 1 02/15/1997 Textiles - Tests for Colour Fastness - Part A06: Instrumental Determination of 1/1 Standard Depth of Colour First Edition Textiles - Tests for Colour Fastness - Part A08: Vocabulary Used in Colour Measurement First Edition Textiles - Tests for Colour Fastness - Part B01: Colour Fastness to Light: Daylight Fifth Edition; Amendment 1-1998 Textiles - Tests for Colour Fastness - Part B02: Colour Fastness to Artificial Light: Xenon Arc Fading Lamp Test Fourth Edition; Amendment 1-1998; Amendment 2-2000 Textiles - Tests for Colour Fastness - Part B03: Colour Fastness to Weathering: Outdoor Exposure Fourth Edition Textiles - Tests for Colour Fastness - Part B04: Colour Fastness to Artificial Weathering: Xenon Arc Fading Lamp Test Fourth Edition Textiles - Tests for Colour Fastness - Part B05: Detection and Assessment of Photochromism Fourth Edition; CEN EN ISO 105-B05: 1995 Textiles - Tests for Colour Fastness - Part B06: Colour Fastness and Ageing to Artificial Light at High Temperatures: Xenon Arc Fading Lamp Test Second Edition; Amendment 1: 09/01/2002 Textiles - Tests for Colour Fastness - Part B08: Quality Control of Blue Wool Reference Materials 1 to 7 First Edition Textiles - Tests for Colour Fastness - Part C06: Colour Fastness to Domestic and Commercial Laundering Third Edition; Technical Corrigendum 1: 02/01/2002; Technical Corrigendum 2: 5/15/2002 Textiles - Tests for Colour Fastness - Part C07: Colour Fastness to Wet Scrubbing of Pigment Printed Textiles First Edition Textiles - Tests for Colour Fastness - Part C08: Colour Fastness to Domestic and Commercial Laundering Using a Non-Phosphate Reference Detergent Incorporating a Low Temperature Bleach Activator First Edition; Technical Corrigendum 1: 5/15/2002; Amendment 1: 5/15/2006 Textiles - Tests for Colour Fastness - Part C09: Colour Fastness to Domestic and Commercial Laundering - Oxidative Bleach Response Using a Non-Phosphate Reference Detergent Incorporating a Low Temperature Bleach Activator First Edition; Technical Corrigendum 1: 5/15/2002; Amendment 1: 12/01/2003 Textiles Tests for colour fastness Part C10: Colour fastness to washing with soap or soap and soda First Edition;: 1989

ISO

105-C08

ISO ISO ISO

105-C09 105-C10

105-C12 CORR 1 Textiles Tests for colour fastness Part C12: Colour fastness to industrial laundering TECHNICAL CORRIGENDUM 1 First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

105-C12 105-D01 105-D02 105-E01 105-E02 105-E03 105-E04 105-E05 105-E06 105-E07 105-E08 105-E09 105-E10 105-E11 105-E12 105-E13 105-E14 105-E16 105-F 105-F01 105-F03 105-F04 105-F05 105-F06 105-F07 105-F10

Textiles Tests for colour fastness Part C12: Colour fastness to industrial laundering First Edition Textiles - Tests for Colour Fastness - Part D01: Colour Fastness to Dry Cleaning Fourth Edition; CEN EN ISO 105-D01: 1995 Textiles - Tests for Colour Fastness - Part D02: Colour Fastness to Rubbing: Organic Solvents Fourth Edition; CEN EN ISO 105-D02: 1995 Textiles - Tests for Colour Fastness - Part E01: Colour Fastness to Water Fourth Edition; Technical Corrigendum 1: 02/01/2002; CEN EN ISO 105-E01: 1996 Textiles - Tests for Colour Fastness - Part E02: Colour Fastness to Sea Water Fourth Edition; Technical Corrigendum 1: 02/01/2002; CEN EN ISO 105-E02: 1996 Textiles - Tests for Colour Fastness - Part E03: Colour Fastness to Chlorinated Water (Swimming-Pool Water) Third Edition; CEN EN ISO 105-E03: 1996 Textiles - Tests for Colour Fastness - Part E04: Colour Fastness to Perspiration Fourth Edition; Technical Corrigendum 1: 02/01/2002; CEN EN ISO 105-E04: 1996 Textiles - Tests for Colour Fastness - Part E05: Colour Fastness to Spotting: Acid Fourth Edition Textiles Tests for colour fastness Part E06: Colour fastness to spotting: Alkali Fourth Edition Textiles - Tests for Colour Fastness - Part E07: Colour Fastness to Spotting: Water Third Edition; Technical Corrigendum 1: 02/01/2002 Textiles - Tests for Colour Fastness - Part E08: Colour Fastness to Hot Water Third Edition; CEN EN ISO 105-E08: 1996 Textiles - Tests for Colour Fastness - Part E09: Colour Fastness to Potting Third Edition; Technical Corrigendum 1: 02/01/2002 Textiles - Tests for Colour Fastness - Part E10: Colour Fastness to Decatizing Third Edition; CEN EN ISO 105-E10: 1996 Textiles - Tests for Colour Fastness - Part E11: Colour Fastness to Steaming Third Edition Textiles - Tests for Colour Fastness - Part E12: Colour Fastness to Milling: Alkaline Milling Third Edition; Technical Corrigendum 1: 02/01/2002; Amendment 1: 11/15/2002 Textiles - Tests for Colour Fastness - Part E13: Colour Fastness to Acid-Felting: Severe Third Edition; Corrigendum 1: 06/01/1999 Textiles - Tests for Colour Fastness - Part E14: Colour Fastness to Acid-Felting: Mild Third Edition Textiles Tests for colour fastness Part E16: Colour fastness to water spotting on upholstery fabrics First Edition Textiles - Tests for Colour Fastness - Part F: Standard Adjacent Fabrics Third Edition Textiles - Tests for Colour Fastness - Part F01: Specification for Wool Adjacent Fabric First Edition Textiles - Tests for Colour Fastness - Part F03: Specification for Polyamide Adjacent Fabric First Edition Textiles - Tests for Colour Fastness - Part F04: Specification for Polyester Adjacent Fabric First Edition Textiles - Tests for Colour Fastness - Part F05: Specification for Acrylic Adjacent Fabric First Edition Textiles - Tests for Colour Fastness - Part F06: Specification for Silk Adjacent Fabric First Edition Textiles - Tests for Colour Fastness - Part F07: Specification for Secondary Acetate Adjacent Fabric First Edition Textiles - Tests for Colour Fastness - Part F10: Specification for Adjacent Fabric: Multifibre First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

105-G01 105-G02 105-G03 105-G04 105-J01 105-J02 105-J03 105-J05 105-N01 105-N02 105-N03 105-N04 105-N05 105-P01 105-P02 105-S01 105-S02 105-S03 105-X01 105-X02 105-X04 105-X05

Textiles - Tests for Colour Fastness - Part G01: Colour Fastness to Nitrogen Oxides Second Edition; Corrigendum 1-1995; CEN EN ISO 105-G01: 1995 Textiles - Tests for Colour Fastness - Part G02: Colour Fastness to Burnt-Gas Fumes Second Edition; Corrigendum 1-1995 Textiles - Tests for Colour Fastness - Part G03: Colour Fastness to Ozone in the Atmosphere Second Edition Textiles - Tests for Colour Fastness Part G04: Colour Fastness to Oxides of Nitrogen in the Atmosphere at High Humidities First Edition Textiles - Tests for Colour Fastness - Part J01: General Principles for Measurement of Surface Colour Fourth Edition Textiles - Tests for Colour Fastness - Part J02: Instrumental Assessment of relative Whiteness Second Edition; Technical Corrigendum 1-1998 Textiles Tests for colour fastness Part J03: Calculation of colour differences First Edition; Technical Corrigendum 1: 06/01/1996; Technical Corrigendum 2: 04/01/2006 Textiles Tests for colour fastness Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02 First Edition Textiles - Tests for Colour Fastness - Part N01: Colour Fastness to Bleaching: Hypochlorite Second Edition; DIN EN 20105-N01: 1995 Textiles - Tests for Colour Fastness - Part N02: Colour Fastness to Bleaching: Peroxide Second Edition; CEN EN ISO 105-N02: 1995 Textiles - Tests for Colour Fastness - Part N03: Colour Fastness to Bleaching: Sodium Chlorite (Mild) Second Edition; CENELEC EN ISO 105-N04: 1995 Textiles - Tests for Colour Fastness - Part N04: Colour Fastness to Bleaching: Sodium Chlorite (Severe) Second Edition Textiles - Tests for Colour Fastness - Part N05: Colour Fastness to Stoving Second Edition; CEN EN ISO 105-N05: 1995 Textiles - Tests for Colour Fastness - Part P01: Colour Fastness to Dry Heat (Excluding Pressing) Second Edition; CEN EN ISO 105P01: 1995 Textiles - Tests for colour fastness - Part P02: Colour fastness to pleating: Steam pleating Third Edition Textiles - Tests for Colour Fastness - Part S01: Colour Fastness to Vulcanization: Hot Air Second Edition; CEN EN ISO 105-S01: 1995 Textiles - Tests for Colour Fastness - Part S02: Colour Fastness to Vulcanization: Sulfur Monochloride Second Edition; CEN EN ISO 105-S02: 1995 Textiles - Tests for Colour Fastness - Part S03: Colour Fastness to Vulcanization: Open Steam Second Edition; CEN EN ISO 105S03: 1995 Textiles - Tests for Colour Fastness - Part X01: Colour Fastness to Carbonizing: Aluminium Chloride Fourth Edition; CEN EN ISO 105-X01: 1995 Textiles - Tests for Colour Fastness - Part X02: Colour Fastness to Carbonizing: Sulfuric Acid Fourth Edition; CEN EN ISO 105-X02: 1995 Textiles - Tests for Colour Fastness - Part X04: Colour Fastness to Mercerizing Fourth Edition Textiles - Tests for Colour Fastness - Part X05: Colour Fastness to Organic Solvents Fourth Edition


105-X06 105-X07 105-X08 105-X09 105-X10 105-X11 105-X12 105-X13 105-X14 105-X16 105-X18 105-Z01 105-Z02 105-Z03 105-Z04 105-Z05 105-Z06 105-Z07 105-Z08 105-Z09 105-Z10 105-Z11 108 109 113 115

Textiles - Tests for Colour Fastness - Part X06: Colour Fastness to Soda Boiling Fourth Edition Textiles - Tests for Colour Fastness - Part X07: Colour Fastness to Cross-Dyeing: Wool Fourth Edition Textiles - Tests for Colour Fastness - Part X08: Colour Fastness to Degumming Fourth Edition Textiles - Tests for Colour Fastness - Part X09: Colour Fastness to Formaldehyde Fourth Edition; CEN EN ISO 105-X09: 1995 Textiles - Tests for Colour Fastness - Part X10: Assessment of Migration of Textile Colours into Polyvinyl Chloride Coatings Fourth Edition; CEN EN ISO 105-X10: 1995 Textiles - Tests for Colour Fastness - Part X11: Colour Fastness to Hot Pressing Fourth Edition; CEN EN ISO 105-X11: 1996 Textiles - Tests for Colour Fastness - Part X12: Colour Fastness to Rubbing Fifth Edition; Replaces GME 60330 [Replaced: GME GME 60330] Textiles - Tests for Colour Fastness - Part X13: Colour Fastness of Wool Dyes to Processes Using Chemical Means for Creasing, Pleating and Setting Fourth Edition Textiles - Tests for Colour Fastness - Part X14: Colour Fastness to Acid Chlorination of Wool: Sodium Dichloroisocyanurate Third Edition Textiles - Tests for Colour Fastness - Part X16: Colour Fastness to Rubbing - Small Areas First Edition Textiles Tests for colour fastness Part X18: Assessment of the potential to phenolic yellowing of materials First Edition Textiles - Tests for Colour Fastness - Part Z01: Colour Fastness to Metals in the Dye-Bath: Chromium Salts Second Edition; CEN EN ISO 105-Z01: 1995 Textiles - Tests for Colour Fastness - Part Z02: Colour Fastness to Metals in the Dye-Bath: Iron and Copper Second Edition; CEN EN ISO 105-Z02: 1995 Textiles - Tests for Colour Fastness - Part Z03: Intercompatibility of Basic Dyes for Acrylic Fibres First Edition Textiles - Tests for Colour Fastness - Part Z04: Dispersibility of Disperse Dyes First Edition Textiles - Tests for Colour Fastness - Part Z05: Determination of the Dusting Behaviour of Dyes First Edition Textiles - Tests for Colour Fastness - Part Z06: Evaluation of Dye and Pigment Migration First Edition Textiles - Tests for Colour Fastness Part Z07: Determination of Application Solubility and Solution Stability of Water-Soluble Dyes First Edition Textiles - Tests for Colour Fastness Part Z08: Determination of Solubility and Solution Stability of Reactive Dyes in the Presence of Electrolytes First Edition Textiles - Tests for Colour Fastness Part Z09: Determination of Cold Water Solubility of Water-Soluble Dyes First Edition Textiles - Tests for Colour Fastness - Part Z10: Determination of Relative Colour Strength of Dyes in Solution First Edition Textiles - Tests for Colour Fastness - Part Z11: Evaluation of Speckiness of Colorant Dispersions First Edition Textile Machinery and Accessories - Weaving Looms - Definition of Left and Right Sides First Edition Textile Machinery - Working Widths of Weaving Machines First Edition Rolling Bearings - Plummer Block Housings - Boundary Dimensions Second Edition Unalloyed Aluminium Ingots for Remelting - Classification and Composition First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

119 120 123 124 125 126 127 128-1 128-20 128-21 128-22 128-23 128-24 128-25 128-30 128-34 128-40 128-44 128-50 129-1 132 137 139

ISO ISO

140-1 140-2

Plastics - Phenol-Formaldehyde Mouldings - Determination of Free Phenols - Iodometric Method First Edition; Plastics - Phenol-Formaldehyde Mouldings - Determination of Free Ammonia and Ammonium Compounds - Colorimetric Comparison Method First Edition Rubber Latex - Sampling Third Edition Latex, Rubber - Determination of Total Solids Content Fourth Edition; Amendment 1: 2/01/2006 Natural Rubber Latex Concentrate - Determination of Alkalinity Fifth Edition Natural rubber latex concentrate Determination of dry rubber content Fifth edition Rubber, Natural Latex Concentrate - Determination of KOH Number Third Edition: Amendment 1: 02/01/2006 Technical Drawings - General Principles of Presentation - Part 1: Introduction and Index First Edition Technical Drawings - General Principles of Presentation - Part 20: Basic Conventions for Lines First Edition Technical Drawings - General Principles of Presentation - Part 21: Preparation of Lines by CAD Systems First Edition Technical Drawings - General Principles of Presentation - Part 22: Basic Conventions and Applications for Leader Lines and Reference Lines First Edition Technical Drawings - General Principles of Presentation - Part 23: Lines on Construction Drawings First Edition Technical Drawings - General Principles of Presentation - Part 24: Lines on Mechanical Engineering Drawings First Edition Technical Drawings - General Principles of Presentation - Part 25: Lines on Shipbuilding Drawings First Edition Technical Drawings - General Principles of Presentation - Part 30: Basic Conventions for Views First Edition; Cancels and Replaces ISO 128:1982 Technical Drawings - General Principles of Presentation - Part 34: Views on Mechanical Engineering Drawings First Edition Technical Drawings - General Principles of Presentation - Part 40: Basic Conventions for Cuts and Sections First Edition Technical Drawings - General Principles of Presentation - Part 44: Sections on Mechanical Engineering Drawings First Edition; Cancels and Replaces ISO 128:1982 Technical Drawings - General Principles of Presentation - Part 50: Basic Conventions for Representing Areas on Cuts and Sections First Edition; Cancels and Replaces ISO 128:1982 Technical drawings Indication of dimensions and tolerances Part 1: General principles First Edition; Supersedes ISO 129 Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia) Fourth Edition; Replaces ISO 133:1983 Wool - Determination of Fiber Diameter - Projection Microscope Method First Edition Textiles - Standard Atmospheres for Conditioning and Testing Second Edition Acoustics Measurement of sound insulation in buildings and of building elements Part 1: Requirements for laboratory test facilities with suppressed flanking transmission AMENDMENT 1: Specific requirements on the frame of the test opening for lightweight twin leaf partitions Third Edition; Amendment 1: 12/1/2004 Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 2: Determination, Verification and Application of Precision Data Second Edition; CEN EN 20140-2: 1993; Corrigendum-1993

ISO ISO ISO ISO ISO ISO

140-3 140-4 140-5 140-6 140-7 140-8

Acoustics Measurement of sound insulation in buildings and of building elements Part 3: Laboratory measurements of airborne sound insulation of building elements AMENDMENT 1: Installation guidelines for lightweight twin leaf partitions Second Edition; Amendment 1: 12/1/2004 Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 4: Field Measurements of Airborne Sound Insulation between Rooms SEcond Edition Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 5: Field Measurements of Airborne Sound Insulation of Facade Elements and Facades Second Edition Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 6: Laboratory Measurements of Impact Sound Insulation of Floors Second Edition Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 7: Field Measurements of Impact Sound Insulation of Floors Second Edition Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 8: Laboratory Measurements of the Reduction of Transmitted Impact Noise by Floor Coverings on a Heavyweight Standard Floor Second Edition Acoustics - Measurements of Sound Insulation in Buildings and of Building Elements - Part 9: Laboratory Measurement of Room-toRoom Airborne Sound Insulation of a Suspended Ceiling with a Plenum Above It First Edition; CEN EN 20140-9: 1993 Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 10: Laboratory Measurement of Airborne Sound Insulation of Small Building Elements First Edition Acoustics - Measurement of sound insulation in buildings and of building elements - Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors First edition Acoustics Measurement of sound insulation in buildings and of building elements Part 14: Guidelines for special situations in the field First Edition Acoustics Measurement of sound insulation in buildings and of building elements Part 14: Guidelines for special situations in the field First Edition Acoustics Measurement of sound insulation in buildings and of building elements Part 16: Laboratory measurement of the sound reduction index improvement by additional lining First Edition Acoustics Measurement of sound insulation in buildings and of building elements Part 18: Laboratory measurement of sound generated by rainfall on building elements First Edition Textile Machinery and Accessories - Pirn Winders and Cross Winders - Definition of Left and Right Sides First Edition Textile Machinery and Accessories - Weaving Preparatory Machines - Definition of Left and Right Sides First Edition Textile Machinery and Accessories - Weft Pirns for Automatic Looms First Edition Metallic materials Charpy pendulum impact test Part 1: Test method First Edition; Supersedes ISO 148:1983 and ISO 83:1976 Metallic Materials - Charpy Pendulum Impact Test - Part 2: Verification of Test Machines First Edition; Cancels and Replaces ISO/R 442: 1965

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

140-9 140-10 140-11 140-14 CORR 1 140-14 140-16 140-18 141 142 143 148-1 148-2

ISO ISO ISO ISO ISO ISO

148-3 150 155 157 161-1 161-2

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

162 171 172 175 176 177 178 179-1 179-2 180

Metallic Materials - Charpy Pendulum Impact Test - Part 3: Preparation and Characterization of Charpy V Reference Test Pieces for Verification of Test Machines First Edition Raw, Refined and Boiled Linseed Oil for Paints and Varnishes - Specifications and Methods of Test Second Edition Belt Drives - Pulleys - Limiting Values for Adjustment of Centres Third Edition Coal - Determination of Forms of Sulfur Second Edition Thermoplastics Pipes for the Conveyance of Fluids - Nominal Pressures - Part 1: Metric Series Third Edition Thermoplastics Pipes for the Conveyance of Fluids - Nominal Outside Diameters and Nominal Pressures - Part 2: Inch-Based Series Second Edition Cinematography - Head Gaps and Sound Records for Three-, Four-, or Six-Track Magnetic Sound Records on 35 mm and SingleTrack on 17,5 mm Motion-Picture Film Containing No Picture - Positions and Width Dimensions Second Edition; Replaces ISO 360: 1975 Plastics - Determination of Bulk Factor of Moulding Materials First Edition Plastics - Phenol - Formaldehyde Mouldings - Detection of Free Ammonia First Edition Plastics - Methods of Test for the Determination of the Effects of Immersion in Liquid Chemicals Second Edition Plastics - Determination of Loss of Plasticizers - Activated Carbon Method Second Edition Plastics - Determination of Migration of Plasticizers Second Edition Plastics - Determination of Flexural Properties Fourth Edition; Amendment 1: 02/15/2004 Plastics - Determination of Charpy Impact Properties - Part 1: Non-Instrumented Impact Test First Edition; Amendment 1: 7/15/2005 Plastics - Determination of Charpy Impact Properties - Part 2: Instrumented Impact Test First Edition; Technical Corrigendum 1: 1115-1998 Plastics - Determination of Izod Impact Strength Third Edition; Amendment 1: 12/1/2006 Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to Evolve Hydrogen Chloride and Any Other Acidic Products at Elevated Temperatures - Part 1: Congo Red Method First Edition Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to Evolve Hydrogen Chloride and Any Other Acidic Products at Elevated Temperatures - Part 2: pH Method First Edition Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to Evolve Hydrogen Chloride and Any Other Acidic Products at Elevated Temperatures - Part 3: Conductometric Method First Edition Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to Evolve Hydrogen Chloride and Any Other Acidic Products at Elevated Temperatures - Part 4: Potentiometric Method First Edition Grey Cast Iron - Classification Second Edition Paper and Board - Sampling to Determine Average Quality Fourth Edition

ISO

182-1

ISO

182-2

ISO

182-3

ISO ISO ISO

182-4 185 186

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

187 188 196 197-1 197-2 197-3 197-4 197-5 199 204 209 212 214 215 216 217 225 226 228-1 228-2 229 230-1 230-2 230-3 230-4 230-5 230-6

Paper, Board and Pulps - Standard Atmosphere for Conditioning and Testing and Procedure for Monitoring the Atmosphere and Conditioning of Samples Second Edition; CEN EN 20187: 1993; PNS 304: 1990 Rubber, Vulcanized or Thermoplastic - Accelerated Ageing and Heat Resistance Tests Fourth Edition Wrought Copper and Copper Alloys - Detection of Residual Stress - Mercury (I) Nitrate Test First Edition Copper and Copper Alloys - Terms and Definitions - Part 1: Materials First Edition Copper and Copper Alloys - Terms and Definitions - Part 2: Unwrought Products (Refinery Shapes) First Edition Copper and Copper Alloys - Terms and Definitions - Part 3: Wrought Products First Edition Copper and Copper Alloys - Terms and Definitions - Part 4: Castings First Edition Copper and Copper Alloys - Terms and Definitions - Part 5: Methods of Processing and Treatment First Edition Rolling Bearings - Thrust Bearings - Tolerances Third edition Metallic Materials - Uninterrupted Uniaxial Creep Testing in Tension - Method of Test First Edition Title not available [Cancelled: ISO 209-1, ISO 209-2] Essential Oils - Sampling Second Edition Documentation - Abstracts for Publications and Documentation First Edition Documentation - Presentation of Contributions to Periodicals and Other Serials First Edition Writing paper and certain classes of printed matter - Trimmed sizes - A and B series, and indication of machine direction Second Edition Paper - Untrimmed Sizes - Designation and Tolerances for Primary and Supplementary Ranges, and Indication of Machine Direction Second Edition Fasteners - Bolts, Screws, Studs and Nuts - Symbols and Designations of Dimensions Second Edition; Corrected and Reprinted 7/15/1992 Acoustics Normal equal-loudness-level contours Second edition; Supersedes NZS ISO 226: 1987 Pipe Threads Where Pressure-Tight Joints Are Not Made on the Threads - Part 1: Dimensions, Tolerances and Designation Fourth Edition Pipe Threads Where Pressure-Tight Joints Are Not Made on the Threads - Part 2: Verification by Means of Limit Gauges Second Edition Machine Tools - Speeds and Feeds First Edition Test Code for Machine Tools - Part 1: Geometric Accuracy of Machines Operating under No-Load or Finishing Conditions Second Edition Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes Third Edition Test Code for Machine Tools - Part 3: Determination of Thermal Effects Second Edition Test code for machine tools Part 4: Circular tests for numerically controlled machine tools Second Edition Test Code for Machine Tools - Part 5: Determination of the Noise Emission First Edition Test code for machine tools Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests) First edition


230-7 233 233-2 233-3 234-1 234-2 235 236-1 236-2 237 238 239 240 241 242 243 244 245 246 247 248 249 251 252 252-1 254 255 257 259 259-2

Test code for machine tools Part 7: Geometric accuracy of axes of rotation First edition Documentation - Transliteration of Arabic Characters into Latin Characters First Edition Information and Documentation - Transliteration of Arabic Characters - into Latin Characters - Part 2: Arabic Language - Simplified Transliteration First Edition Information and Documentation - Transliteration of Arabic Characters into Latin Characters - Part 3: Persian Language - Simplified Transliteration First Edition Files and Rasps - Part 1: Dimensions Files and Rasps - Part 2: Characteristics of Cut First Edition Parallel Shank Jobber and Stub Series Drills and Morse Taper Shank Drills Second Edition; Amendment Slip-1981; Corrigendum 11996 Hand Reamers First Edition; Amendment 1: 2/15/1977 Long Fluted Machine Reamers, Morse Taper Shanks First Edition; Amendment 1: 2/15/1977 Rotating Tools with Parallel Shanks - Diameters of Shanks and Sizes of Driving Squares First Edition Reduction Sleeves and Extension Sockets for Tools with Morse Taper Shanks First Edition Drill Chuck Tapers Second Edition Milling Cutters - Interchangeability Dimensions for Cutter Arbors or Cutter Mandrels Second Edition Shanks for Turning and Planing Tools - Shapes and Dimensions of the Section Second Edition Carbide Tips for Brazing on Turning Tools First Edition Turning Tools with Carbide Tips - External Tools Aircraft - Sealing Wire First Edition Aircraft - Lockwire - Diameters Second Edition Rolling bearings Cylindrical roller bearings, separate thrust collars Boundary dimensions Third Edition Rubber - Determination of Ash Fourth Edition Rubbers, raw - Determination of volatile-matter content Fourth Edition Rubber, Raw Natural - Determination of Dirt Content Third Edition Conveyor belts with textile carcass Widths and lengths Third Edition Conveyor belts Adhesion between constitutive elements Test methods Third Edition Textile Conveyor Belts - Adhesive Strength between Constitutive Elements - Part 1: Methods of Test First Edition; Partially Replaces ISO 252: 1988; Corrigendum 1: 11/15/2006 Belt Drives - Pulleys - Quality, Finish and Balance Third Edition Belt Drives - Pulleys for V-Belts (System Based on Datum Width) - Geometrical Inspection of Grooves Second Edition Pesticides and other agrochemicals Principles for the selection of common names Third Edition Documentation - Transliteration of Hebrew Characters into Latin Characters First Edition; Cancels and Replaces ISO R 259-1962 Information and Documentation - Transliteration of Hebrew Characters into Latin Characters - Part 2: Simplified Transliteration First Edition; Corrected and Reprinted - 1995


261 262 263 264 265-1 266 268 269 272 273 276 277 279 280 281 282 283 284 286-1 286-2 287 289-1 289-2 289-3 289-4 291

ISO General Purpose Metric Screw Threads - General Plan Second Edition ISO General Purpose Metric Screw Threads - Selected Sizes for Screws, Bolts and Nuts Second Edition ISO Inch Screw Threads - General Plan and Selection for Screws, Bolts and Nuts - Diameter Range 0,06 to 6 in First Edition Unplasticized Polyvinyl Chloride (PVC) Fittings with Plain Sockets for Pipes under Pressure - Laying Length - Metric Series First Edition; Addendum 1-1982 Pipes and Fittings of Plastics Materials - Fittings for Domestic and Industrial Waste Pipes - Basic Dimensions: Metric Series - Part 1: Unplasticized Poly(Vinyl Chloride) (PVC-U) First Edition Acoustics - Preferred Frequencies Second Edition Aircraft - Mechanical and Electromechanical Indicators - General Requirements First Edition Correspondence Envelopes - Designation and Sizes Second Edition; PNS 319: 1989 Fasteners - Hexagon Products - Widths Across Flats Second Edition Fasteners - Clearance Holes for Bolts and Screws First Edition; Amendment Slip-1979; NZS/ISO 273: 1979 Binders for Paints and Varnishes - Linseed Stand Oil - Requirements and Methods of Test Second Edition Binders for Paints and Varnishes - Raw Tung Oil - Requirements and Methods of Test Second Edition Essential Oils - Determination of Relative Density at 20 Degrees C - Reference Method second Edition Essential Oils - Determination of Refractive Index Second Edition Rolling bearings Dynamic load ratings and rating life Second Edition Conveyor Belts - Sampling Second Edition Textile conveyor belts Full thickness tensile strength, elongation at break and elongation at the reference load Test method Third Edition [Superseded: ISO 283-1, ISO 283-1] Conveyor Belts - Electrical Conductivity - Specification and Test Method Third Edition ISO System of Limits and Fits - Part 1: Bases of Tolerances, Deviations and Fits First Edition; CEN EN 20286-1: 1993; NZS/ISO 286.1: 1988 ISO system of limits and fits Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts First Edition; Technical Corrigendum 1: 09/15/2006 Paper and Board - Determination of Moisture Content - Oven-Drying Method Second Edition; CEN EN 20287: 1994 Rubber, Unvulcanized - Determinations Using a Shearing-Disc Viscometer - Part 1: Determination of Mooney Viscosity Second edition Rubber, Unvulcanized - Determinations Using a Shearing-Disc Viscometer - Part 2: Determination of Pre-Vulcanization Characteristics First Edition Rubber, Unvulcanized - Determinations Using a Shearing-Disc Viscometer - Part 3: Determination of the Delta Mooney Value for NonPigmented, Oil-Extended, Emulsion-Polymerized SBR First Edition Rubber, unvulcanized Determinations using a shearing-disc viscometer Part 4: Determination of the Mooney stress-relaxation rate First Edition; Corrected Version: 03/01/2004 Plastics Standard atmospheres for conditioning and testing Third Edition

ISO

293

Plastics Compression moulding of test specimens of thermoplastic materials Third Edition Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens First Edition; Supersedes ISO 294: 1995; Amendment 1: 01-15-2001; Amendment 2: 09-01-2005 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 2: Small Tensile Bars First Edition; Supersedes ISO 294: 1995; Amendment 1: 05/15/2004 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates AMENDMENT 1 Second Edition Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates Second Edition Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 4: Determination of Moulding Shrinkage Second Edition Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 5: Preparation of Standard Specimens for Investigating Anisotropy First Edition; Technical Corrigendum 1: 3/15/2003; Amendment 1: 05/01/2004 Plastics - Compression Moulding of Test Specimens of Thermosetting Materials Third Edition Machine Tools - Self-Holding Tapers for Tool Shanks Second Edition 7/24 Tapers for Tool Shanks for Manual Changing Second Edition Machine Tools - Lathe Centres - Sizes for Interchangeability First Edition Machine Tool Tables - T-Slots and Corresponding Bolts Second Edition Zinc Alloy Ingots Intended for Casting Second Edition Pulps Determination of Kappa number Second Edition Road vehicles Installation of lighting and light signalling devices for motor vehicles and their trailers TECHNICAL CORRIGENDUM 1 Second Edition Road vehicles Installation of lighting and light signalling devices for motor vehicles and their trailers Second Edition Surface Active Agents - Determination of Surface Tension by Drawing up Liquid Films Second Edition; Technical Corrigendum 11998 Plastics - Determination of Thermal Stability of Poly(Vinyl Chloride), Related Chlorine-Containing Homopolymers and Copolymers and Their Compounds - Discoloration Method Second Edition Plastics Thermoplastic materials Determination of Vicat softening temperature (VST) Fourth Edition Plastics Polyamides Determination of viscosity number Fifth Edition Plastics - Phenolic Moulding Materials - Determination of Acetone-Soluble Matter (Apparent Resin Content of Material in the Unmoulded State) Third Edition Manganese Ores and Concentrates - Determination of Hygroscopic Moisture Content in Analytical Samples - Gravimetric Method Third Edition Manganese Ores - Determination of Active Oxygen Content, Expressed as Manganese Dioxide - Titrimetric Method Third Edition Manganese Ores - Determination of Carbon Dioxide Content - Gravimetric Method Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

294-1 294-2 294-3 AMD 1 294-3 294-4 294-5 295 296 297 298 299 301 302 303 CORR 1 303 304 305 306 307 308 310 312 314


315 316 317 320 333 334 337 340 342 344 349 351 354 355 356 359 361 362-1 363-1 363-2 364 365 366-1 366-2 366-3 366-4

Manganese Ores and Concentrates - Determination of Nickel Content - Dimethylglyoxime Spectrometric Method and Flame Atomic Absorption Spectrometric Method First Edition Manganese Ores - Determination of Cobalt Content - Nitroso-R-Salt Photometric Method Second Edition Manganese Ores and Concentrates - Determination of Arsenic Content - Spectrometric Method First Edition Manganese Ores - Determination of Sulphur Content - Barium Sulphate Gravimetric Methods and Sulphur Dioxide Titrimetric Method After Combustion Second Edition Coal - Determination of Nitrogen - Semi-Micro Kjeldahl Method Fourth Edition; Corrigendum 1-1996 Solid Mineral Fuels - Determination of Total Sulfur - Eschka Method Second Edition Road Vehicles - 50 Semi-Trailer Fifth Wheel Coupling Pin - Basic and Mounting/Interchangeability Dimensions Second Edition; Corrigendum 1-1990 Conveyor belts Laboratory scale flammability characteristics Requirements and test method Third Edition Textile Machinery and Accessories - Worsted and Woollen Cards - Width of Cylinder and Width on the Wire Second Edition Textile Machinery and Accessories - Spinning Machines - Flyer Bobbins First Edition Hard Coal - Audibert-Arnu Dilatometer Test First Edition Solid Mineral Fuels - Determination of Total Sulfur - High Temperature Combustion Method Third Edition; Corrigendum 1-1996 Acoustics Measurement of sound absorption in a reverberation room Second Edition Rolling bearings Tapered roller bearings Boundary dimensions and series designations Second Edition Essential Oils - Preparation of Test Samples Second Edition Cinematography - Projectable Image Area on 16 mm Motion-Picture Prints - Dimensions and Location Second Edition Basic Ionizing Radiation Symbol First Edition Measurement of noise emitted by accelerating road vehicles Engineering method Part 1: M and N categories First Edition [Cancelled: ISO 362, ISO 362, ISO 7188] Textile machinery and accessories - Flat steel healds with closed end loops - Part 1: Dimensions of healds manufactured of rolled steel wire First Edition;:1992 Textile machinery and accessories Flat steel healds with closed end loops Part 2: Dimensions of healds manufactured of hardened strip steel First Edition Textile Machinery and Accessories - Twin Wire Healds for Weaving Machines with Heald Frames First Edition Textile Machinery and Accessories - Twin Wire Healds with Inset Mail for Jacquard Weaving Second Edition Textile Machinery and Accessories - Reeds - Part 1: Pitch Bound Reeds - Dimensions First Edition Textile Machinery and Accessories - Reeds - Part 2: Metal Reeds with Plate Baulk - Dimensions and Designation First Edition; Replaces ISO 367: 1976 Textile Machinery and Accessories - Reeds - Part 3: Metal Reeds with Double-Spring Baulk - Dimensions and Designation First Edition Textile machinery and accessories - Reeds - Part 4: Dimensions and designation of plasticbound metal reeds Second edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

366-5 368 376 377 378 379 383 384 385 386 387 389-1 389-2 389-3 389-4 389-5 389-6 389-7 389-8 390 404 406 407 413 415

Textile machinery and accessories Reeds Part 5: Dimensions and designation of profile capsules First Edition Spinning Preparatory, Spinning and Doubling (Twisting) Machinery - Tubes for Ring-Spinning, Doubling and Twisting Spindles, Taper 1:38 and 1:64 Fourth Edition Metallic Materials - Calibration of Force-Proving Instruments Used for the Verification of Uniaxial Testing Machines Third Edition Steel and Steel Products - Location and Preparation of Samples and Test Pieces for Mechanical Testing Second Edition; Corrigendum 1 09-15-1997 Gymnastic Equipment - Parallel Bars First Edition Gymnastic Equipment - Horizontal Bar First Edition Laboratory Glassware - Interchangeable Conical Ground Joints First Edition Laboratory Glassware - Principles of Design and Construction of Volumetric Glassware First Edition Laboratory glassware Burettes First Edition; Replaces ISO 385-1:1984, ISO 385-2:1984, ISO 385-3:1984 Liquid-in-Glass Laboratory Thermometers - Principles of Design, Construction and Use First Edition; Hydrometers - Principles of Construction and Adjustment First Edition; Acoustics - Reference Zero for the Calibration of Audiometric Equipment - Part 1: Reference Equivalent Threshold Sound Pressure Levels for Pure Tones and Supra-Aural Earphones First Edition Acoustics - Reference Zero for the Calibration of Audiometric Equipment - Part 2: Reference Equivalent Threshold Sound Pressure Levels for Pure Tones and Insert Earphones First Edition Acoustics - Reference Zero for the Calibration of Audiometric Equipment - Part 3: Reference Equivalent Threshold Force Levels for Pure Tones and Bone Vibrators First Edition; Corrigendum 1-1995; AS/NZS 1591.1: 1995 Acoustics - Reference Zero for the Calibration of Audiometric Equipment - Part 4: Reference Levels for Narrow-Band Masking Noise First Edition Acoustics Reference zero for the calibration of audiometric equipment Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz First Edition;:1998 Acoustics Reference zero for the calibration of audiometric equipment Part 6: Reference threshold of hearing for test signals of short duration First Edition Acoustics Reference zero for the calibration of audiometric equipment Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions Second Edition Acoustics Reference zero for the calibration of audiometric equipment Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones First Edition Products in Fibre-Reinforced Cement - Sampling and Inspection Second Edition Steel and Steel Products - General Technical Delivery Requirements Second Edition Technical Drawings - Tolerancing of Linear and Angular Dimensions Second Edition Small Medical Gas Cylinders - Pin-Index Yoke-Type Valve Connections Third Edition Aircraft - Heads of Lubricating Nipples First Edition Envelopes, Postcards and Similar Articles - Cancellation Area First Edition


416 418 420 422 423 424 431 432 433 437 439 441 445 446 447 449 451 456 457 458-1 458-2 461-1 461-2 463 CORR 1 463 464 466 472 476 477

Picture Postcards - Area Reserved for the Address First Edition Photography - Processing Chemicals - Specifications for Anhydrous Sodium Sulfite Third Edition Photography - Processing Chemicals - Specifications for Potassium Bromide Second Edition Photography - Processing Chemicals - Specifications for p-Menthylaminophenol Sulfate Second Edition Photography - Processing Chemicals - Specifications for Hydroquinone Second Edition Photography - Processing Chemicals - Specifications for Anhydrous Sodium Carbonate Monohydrate Second Edition Copper Refinery Shapes Second Edition Ply Type Conveyor Belts - Characteristics of Construction Second Edition Conveyor Belts - Marking Second Edition, Amendment 1: 01/15/2006 Steel and Cast Iron - Determination of Total Carbon Content - Combustion Gravimetric Method First Edition Steel and Cast Iron - Determination of Total Silicon Content - Gravimetric Method Second Edition Textile Machinery and Accessories - Drop Wires for Warp Stop Motions for Weaving Machines without Automatic Drawing-In Second Edition Pallets for Materials Handling - Vocabulary Second Edition Micrographics ISO character and ISO test chart No. 1 Description and use Third Edition Machine Tools - Direction of Operation of Controls Second Edition Ships and Marine Technology - Magnetic Compasses, Binnacles and Azimuth Reading Devices - Class A Second Edition; Corrected and Reprinted 04/01/1999 Aircraft - Pressure Re-Oiling Connection First Edition; Erratum-1980 Surface Active Agents - Analysis of Soaps - Determination of Free Caustic Alkali First Edition Soaps - Determination of Chloride Content - Titrimetric Method Second Edition Plastics - Determination of Stiffness in Torsion of Flexible Materials - Part 1: General Method First Edition Plastics - Determination of Stiffness in Torsion of Flexible Materials - Part 2: Application to Plasticized Compounds of Homopolymers and Copolymers of Vinyl Chloride First Edition Aircraft - Connectors for Ground Electrical Supplies - Part 1: Design, Performance and Test Requirements Second Edition Aircraft - Connectors for Ground Electrical Supplies - Part 2: Dimensions First Edition Geometrical Product Specifications (GPS) Dimensional measuring equipment Design and metrological characteristics of mechanical dial gauges CORR 1 First Edition;:1965 [Replaced: ISO R463] Geometrical Product Specifications (GPS) Dimensional measuring equipment Design and metrological characteristics of mechanical dial gauges First Edition;:1965 [Replaced: ISO R463] Rolling Bearings - Radial Bearings with Locating Snap Ring - Dimensions and Tolerances Second Edition Cinematography - Image Produced by 16mm Motion-Picture Camera Aperture - Position and Dimensions First Edition; Amendment Slip-1980 Plastics - Vocabulary Plastiques - Vocabulaire Third Edition Textile Machinery and Accessories - Pirn Winding Machines - Vocabulary First Edition Textile Machinery and Accessories - Cone and Cheese Winding Machines - Vocabulary First Edition


482 483 484-1 484-2 485 486 487 488 489 490 491 492 493 494 496 497 498 500-1 CORR 1 500-1 500-2 500-3 501 502 504 505 506 509

Aircraft - Propulsion Units and Components - Methods of Numbering and Describing Direction of Rotation First Edition Plastics - Small Enclosures for Conditioning and Testing Using Aqueous Solutions to Maintain Relative Humidity at a Constant Value Second Edition Shipbuilding - Ship Screw Propellers - Manufacturing Tolerances - Part 1: Propellers of Diameter Greater Than 2,50 m First Edition Shipbuilding - Ship Screw Propellers - Manufacturing Tolerances - Part 2: Propellers of Diameter between 0,80 and 2,50 m Inclusive First Edition Aircraft Water-Methanol Pressure Connections First Edition; Erratum-1980 Cinematography - 16 mm Motion-Picture Film Perforated 8 mm Type R - Cutting and Perforating Dimensions Third Edition Steel Roller Chains, Types S and C, Attachments and Sprockets Third Edition Milk - Determination of Fat Content - Gerber Butyrometers First Edition Plastics - Determination of the Refractive Index Second Edition Cinematography - Magnetic Stripes and Magnetic Recording Head Gaps for Sound Record on 16 mm Motion-Picture Film Perforated Along One Edge (Type 1) - Positions and Width Dimensions Second Edition Cinematography - 35 mm Motion-Picture Film and Magnetic Film - Cutting and Perforating Dimensions Sixth Edition Rolling Bearings - Radial Bearings - Tolerances Fourth Edition Aircraft - Dimensions for Single-Hole Mounting (Class 1 and Class 2) Lever-Operated Manual Switches First Edition Parallel Shank Twist Drills - Long Series First Edition Driving and Driven Machines - Shaft Heights First Edition Guide to the Choice of Series of Preferred Numbers and of Series Containing More Rounded Values of Preferred Numbers First Edition Natural Rubber Latex Concentrate - Preparation of Dry Films Second Edition Agricultural tractors Rear-mounted power take-off types 1, 2 and 3 Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone TECHNICAL CORRIGENDUM 1 First Edition Agricultural tractors Rear-mounted power take-off types 1, 2 and 3 Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone First Edition Agricultural tractors Rear-mounted power take-off types 1, 2 and 3 Part 2: Narrow-track tractors, dimensions for master shield and clearance zone First Edition; Together With ISO 500-1:2004 and ISO 500-3:2004 Replaces ISO 500:1991 Agricultural tractors Rear-mounted power take-off types 1, 2 and 3 Part 3: Main PTO dimensions and spline dimensions, location of PTO First Edition; Together With ISO 500-1:2004 and ISO 500-2:2004 Replaces ISO 500:1991 Hard Coal - Determination of the Crucible Swelling Number Third Edition Coal - Determination of Caking Power - Gray-King Coke Test Second Edition Turning Tools with Carbide Tips - Designation and Marking First Edition Conveyor Belts - Method for the Determination of the Tear Propagation Resistance of Textile Conveyor Belts Second Edition Rubber Latex, Natural, Concentrate - Determination of Volatile Fatty Acid Number Third Edition Pallet Trucks - Principal Dimensions First Edition; Replaces ISO R509: 1966

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

510 513 514 516 517 518 519 520 521 522 525 527-1 527-2 527-3 527-4 527-5 528 529 530 532 534 535 536 540 542 544 548 549

Red Lead for Paints First Edition Classification and application of hard cutting materials for metal removal with defined cutting edges Designation of the main groups and groups of application Third Edition; Turning Tools with Carbide Tips - Internal Tools First Edition Photography - Camera Shutters - Timing Third Edition Photography Apertures and related properties pertaining to photographic lenses Designations and measurements Second Edition; Technical Corrigendum: 10/01/2006 Photography Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units Specification Second Edition Photography - Hand-Held Cameras - Flash-Connector Dimensions Second Edition Cereals and Pulses - Determination of the Mass of 1000 Grains First Edition Machine Chucking Reamers with Parallel Shanks or Morse Taper Shanks First Edition Special Tolerances for Reamers First Edition Bonded Abrasive Products - General Requirements Third Edition Plastics - Determination of tensile properties - Part 1: General principles First Edition; Corrigendum 1-1994; Amendment 1: 09-012005 Plastics - Determination of Tensile Properties - Part 2: Test Conditions for Moulding and Extrusion Plastics First Edition Plastics - Determination of Tensile Properties - Part 3: Test Conditions for Films and Sheets First Edition; Technical Corrigendum 1:06-15-1998; Technical Corrigendum 2:04-15-2001 PLastics - Determination of Tensile Properties - Part 4: Test Conditions for Isotropic and Orthotropic Fibre-Reinforced Plastic Composites First Edition; Replaces ISO 3268:1978 Plastics - Determination of Tensile Properties - Part 5: Test Conditions for Unidirectional Fibre-Reinforced Plastic Composites First Edition; Replaces 3268:1978 Refractory Products - Determination of Pyrometric Cone Equivalent (Refractoriness) First Edition Short Machine Taps and Hand Taps Second Edition Aircraft - General Purpose Push-Pull Single-Pole Circuit-Breakers - Dimensions First Edition Acoustics - Method for Calculating Loudness Level First Edition Paper and Board - Determination of Thickness and Apparent Bulk Density or Apparent Sheet Density Third Edition Paper and Board - Determination of Water Absorptiveness - Cobb Method Second Edition; CEN EN 20535: 1994 Paper and Board - Determination of Grammage Second Edition Solid Mineral Fuels - Determination of Fusibility of Ash - High-Temperature Tube Method Third Edition Oilseeds - Sampling Second Edition; CEN EN ISO 542: 1995 Welding consumables Technical delivery conditions for welding filler materials Type of product, dimensions, tolerances and markings Third Edition Manganese Ores - Determination of Barium Oxide Content - Barium Sulphate Gravimetric Method Second Edition Manganese Ores - Determination of Combined Water Content - Gravimetric Method Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

553 554 556 558 559 561 562 565 567 570 572 575 576 579 580 582 583 583-1 584 585 587 589 590 591-1 592 594-1 594-2 595-1

Manganese Ores - Determination of Vanadium Content - Titrimetric Method and Phosphotungstovanadate Photometric Method Second Edition Standard Atmospheres for Conditioning and/or Testing - Specifications First Edition Coke (Greater Than 20 mm in Size) - Determination of Mechanical Strength First Edition Conditioning and Testing - Standard Atmospheres - Definitions First Edition Steel Tubes for Water and Sewage Second Edition Coal Preparation Plant - Graphical Symbols Second Edition; Corrected and Reprinted - 1992 Hard Coal and Coke - Determination of Volatile Matter Third Edition Test Sieves - Metal Wire Cloth, Perforated Metal Plate and Electroformed Sheet - Nominal Sizes of Openings Third Edition Coke - Determination of Bulk Density in a Small Container Second Edition Textile Machinery and Accessories - Heald Carrying Rods for Healds with ClosedO"-Shaped End Loops First Edition" Textile Machinery and Accessories - Shuttles for Pirn Changing Automatic Looms - Dimensions First Edition; Erratum-1976 Textile Machinery and Accessories - Transfer Cones - Half Angle of the Cone 4 Degrees 20 Feet First Edition Textile Machinery and Accessories - Paper Patterns for Dobbies - Dimensions First Edition Coke - Determination of Total Moisture Third Edition Plastics piping and ducting systems Injection-moulded thermoplastics fittings Methods for visually assessing the effects of heating Third Edition Rolling Bearings - Chamfer Dimensions - Maximum Values Third Edition Conveyor belts with a textile carcass Total belt thickness and thickness of constitutive elements Test methods Third Edition [Cancelled: ISO 583-1, ISO 583-1] Conveyor belts with a textile carcass Total thickness and thickness of elements Part 1: Methods of test First Edition; Technical Corrigendum 1: 12/01/2006; Together with 583-2 Replaces ISO 583:1990 [Cancelled By: ISO 583, ISO 583] Plastics - Unsaturated Polyester Resins - Determination of Reactivity at 80 Degrees C (Conventional Method) First Edition Plastics - Unplasticized Cellulose Acetate - Determination of Moisture Content Second Edition Solid Mineral Fuels - Determination of Chlorine Using Eschka Mixture Third Edition Hard coal Determination of total moisture Third Edition Oil of Brazilian Sassafras First Edition Titanium Dioxide Pigments for Paints - Part 1: Specifications and Methods of Tests First Edition; Replaces ISO 591 Essential Oils - Determination of Optical Rotation Second Edition Conical Fittings with a 6 % (Luer) Taper for Syringes, Needles and Certain Other Medical Equipment - Part 1: General Requirements First Edition; CEN EN 20594-1: 1993 Conical Fittings with a 6 % (Luer) Taper for Syringes, Needles and Certain Other Medical Equipment - Part 2: Lock Fittings Second Edition Reusable All-Glass or Metal-and-Glass Syringes for Medical Use - Part 1: Dimensions First Edition; Corrected and Reprinted - 1988

ISO ISO ISO

595-2 601 602

Reusable All-Glass or Metal-and-Glass Syringes for Medical Use - Part 2: Design, Performance Requirements and Tests First Edition; CEN EN ISO 595-2: 1994 Solid Mineral Fuels - Determination of Arsenic Content Using the Standard Silver Diethyldithiocarbamate Photometric Method of ISO 2590 First Edition Coal - Determination of Mineral Matter Second Edition Bonded Abrasive Products - Dimensions - Part 1: Grinding Wheels for External Cylindrical Grinding between Centres First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-2: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 2: Grinding Wheels for Centreless External Cylindrical Grinding Second Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 and ISO 603-3: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 3: Grinding Wheels for Internal Cylindrical Grinding First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999, ISO 603-2: 1999 and ISO 603-4: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 4: Grinding Wheels for Surface Grinding/Peripheral Grinding First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-3: 1999 and ISO 603-5: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 5: Grinding Wheels for Surface Grinding/Face Grinding First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-4: 1999 and ISO 603-6: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 6: Grinding Wheels for Tool and Tool Room Grinding First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-5: 1999 and ISO 603-7: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 7: Grinding Wheels for Manually Guided Grinding First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-6: 1999 and ISO 603-8: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976

ISO

603-1

ISO

603-2

ISO

603-3

ISO

603-4

ISO

603-5

ISO

603-6

ISO

603-7

ISO

603-8

ISO

603-9

ISO

603-10

Bonded Abrasive Products - Dimensions - Part 8: Grinding Wheels for Deburring and Fettling/Snagging First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-7: 1999 and ISO 603-9: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 9: Grinding Wheels for High-Pressure Grinding First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-8: 1999 and ISO 603-10: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 10: Stones for Honing and Superfinishings First Edition; Technical Corrigendum 1: 1115-1999; Together with ISO 603-1: 1999 to ISO 603-9: 1999 and ISO 603-11: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 11: Hand Finishing Sticks First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-10: 1999 and ISO 603-12: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 12: Grinding Wheels for Deburring and Fettling on a Straight Grinder First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-11: 1999 and ISO 603-13: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 13: Grinding Wheels for Deburring and Fettling on a Vertical Grinder First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-12: 1999 and ISO 603-14: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 14: Grinding Wheels for Deburring and Fettling/Snagging on an Angle Grinder First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-13: 1999, ISO 603-15: 1999 and ISO 60316: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 15: Grinding Wheels for Cutting-Off on Stationary or Mobile Cutting-Off Machines First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-14: 1999 and ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 16: Grinding Wheels for Cutting-Off on Hand Held Power Tools First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-15: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976

ISO

603-11

ISO

603-12

ISO

603-13

ISO

603-14

ISO

603-15

ISO

603-16

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

604 605 606 CORR 1 606 607 609 610 611 612 613 614 616 619 621 622 625 629 630 630-2 631 633 636 638 639-1 639-2

Plastics - Determination of Compressive Properties Third Edition Pulses - Determination of Impurities, Size, Foreign Odours, Insects, and Species and Variety - Test Methods Second Edition Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets TECHNICAL CORRIGENDUM 1 Third Edition Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets Third Edition Surface Active Agents and Detergents - Methods of Sample Division First Edition Solid Mineral Fuels - Determination of Carbon and Hydrogen - High Temperature Combustion Method Second Edition; Corrigendum 1-1996 High-Tensile Steel Chains (Round Link) for Chain Conveyors and Coal Ploughs Second Edition Road Vehicles - Braking of Automotive Vehicles and Their Trailers - Vocabulary Vehicules Routiers - Freinage des Vehicules Automobiles et de Leurs Remorques - Vocabulaire Fourth Edition Road Vehicles - Dimensions of Motor Vehicles and Towed Vehicles - Terms and Definitions First Edition; Erratum-1979; PNS 634: 1992 Ships and Marine Technology - Magnetic Compasses, Binnacles and Azimuth Reading Devices - Class B Second Edition Shipbuilding and Marine Structures - Toughened Safety Glass Panes for Rectangular Windows and Side Scuttles - Punch Method of Non-Destructive Strength Testing Third Edition Coke - Determination of Shatter Indices Second Edition Manganese Ores - Determination of Chromium Content - Diphenylcarbazide Photometric Method and Silver Persulphate Titrimetric Method Second Edition Manganese Ores - Determination of Metallic Iron Content (Metallic Iron Content Not Exceeding 2 %) - Sulphosalicylic Acid Photometric Method Second Edition Solid Mineral Fuels - Determination of Phosphorus Content - Reduced Molybdophosphate Photometric Method First Edition Solid Mineral Fuels - Determination of Carbon and Hydrogen - Liebig Method Second Edition; Corrigendum 1-1996 Steel and Cast Iron - Determination of Manganese Content - Spectrophotometric Method First Edition; PNS 557: 1993 Structural Steels - Plates, Wide Flats, Bars, Sections and Profiles Second Edition; AMENDMENT 1: 12/01/2003 Structural Steels - Part 2: Technical Delivery Requirements for Hot-Finished Hollow Sections First Edition Mosaic Parquet Panels - General Characteristics First Edition Cork - Vocabulary Lige Vocabulaire Second Edition Welding consumables Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels Classification Third Edition Pulps - Determination of Dry Matter Content First Edition; CEN EN 20638: 1993 Codes for the Representation of Names of Languages - Part 1: Alpha-2 Code Codes pour la Representation des Noms de Langue Partie 1: Code Alpha-2 First Edition; Replaces ISO 639 Codes for the Representation of Names of Languages - Part 2: Alpha-3 Code Codes Pour La Representation Des Noms De Langue Partie 2: Code Alpha-3 First Edition


639-3 641 642 643 646 647 648 649-1 649-2 650 651 652 653 654 655 656 657-1 657-2 657-5 657-11 657-14 657-15 657-16 657-18 657-19 657-21 658

Codes for the representation of names of languages Part 3: Alpha-3 code for comprehensive coverage of languages First Edition Laboratory Glassware - Interchangeable Spherical Ground Joints First Edition Steel - Hardenability Test by End Quenching (Jominy Test) Second Edition Steels - Micrographic Determination of the Apparent Grain Size Second Edition Information Technology - ISO 7-Bit Coded Character Set for Information Interchange Third Edition Brown Coals and Lignites - Determination of the Yields of Tar, Water, Gas and Coke Residue by Low Temperature Distillation First Edition Laboratory Glassware - One-Mark Pipettes First Edition Laboratory Glassware - Density Hydrometers for General Purposes - Part 1: Specification First Edition Laboratory Glassware - Density Hydrometers for General Purposes - Part 2: Test Methods and Use First Edition Relative Density 60/60 Degrees F Hydrometers for General Purposes First Edition Solid-Stem Calorimeter Thermometers First Edition Enclosed-Scale Calorimeter Thermometers First Edition Long Solid-Stem Thermometers for Precision Use First Edition Short Solid-Stem Thermometers for Precision Use First Edition; Erratum-1982 Long Enclosed-Scale Thermometers for Precision Use First Edition; Erratum-1982 Short Enclosed-Scale Thermometers for Precision Use First Edition Hot-Rolled Steel Sections - Part 1: Equal-Leg Angles - Dimensions First Edition Hot-Rolled Steel Sections - Part 2: Unequal-Leg Angles - Dimensions First Edition Hot-Rolled Steel Sections - Part V: Equal-Leg Angles and Unequal-Leg Angles - Tolerances for Metric and Inch Series First Edition Hot-Rolled Steel Sections - Part 11: Sloping Flange Channel Sections (Metric Series) - Dimensions and Sectional Properties First Edition Hot-Rolled Steel Sections - Part 14: Hot-Finished Structural Hollow Sections - Dimensions and Sectional Properties Third Edition Hot-Rolled Steel Sections - Part 15: Sloping Flange Beam Sections (Metric Series) - Dimensions and Sectional Properties First Edition Hot-Rolled Steel Sections - Part 16: Sloping Flange Column Sections (Metric Series) - Dimensions and Sectional Properties First Edition Hot-Rolled Steel Sections - Part 18: L Sections for Shipbuilding (Metric Series) - Dimensions, Sectional Properties and Tolerances First Edition Hot-Rolled Steel Sections - Part 19: Bulb Flats (Metric Series) - Dimensions, Sectional Properties and Tolerances First Edition Hot-Rolled Steel Sections - Part 21: T-Sections with Equal Depth and Flange Width - Dimensions First Edition Oilseeds - Determination of Content Impurities Third Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

659 660 661 662 663 664 665 666 668 669 671 672 673 675 676 677 678 679 680 683-1 683-9 683-10 683-11 683-14 683-15 683-17 683-18 684 685

Oilseeds - Determination of Oil Content (Reference Method) Third Edition Animal and Vegetable Fats and Oils - Determination of Acid Value and Acidity Second Edition; Amendment 1: 3/15/2003 Animal and vegetable fats and oils Preparation of test sample Third Edition Animal and Vegetable Fats and Oils - Determination of Moisture and Volatile Matter Content Second Edition Animal and vegetable fats and oils Determination of insoluble impurities content Fourth Edition Oilseeds - Reduction of Laboratory Sample to Test Sample Second Edition Oilseeds - Determination of Moisture and Volatile Matter Content Second Edition; Corrected Version: 04/01/2002 Machine tools Mounting of grinding wheels by means of hub flanges Third Edition Series 1 freight containers - Classification, dimensions and ratings Fifth Edition; Amendment 1: 09/15/2005; Amendment 2: 10/01/2005 Resistance Welding - Resistance Welding Equipment - Mechanical and Electrical Requirements Second Edition * Corrected and Reprinted 03/15/2001 Steel and Cast Iron - Determination of Sulphur Content - Combustion Titrimetric Method First Edition Soaps - Determination of Moisture and Volatile Matter Content - Oven Method First Edition Soaps - Determination of Content of Ethanol-Insoluble Matter Second Edition Textiles - Woven Fabrics - Determination of Dimensional Change on Commercial Laundering Near the Boiling Point First Edition; Corrigendum 1-1990 Spices and Condiments - Botanical Nomenclature Second Edition; Corrigendum 1-02/15/1997 Straight Bevel Gears for General Engineering and Heavy Engineering - Basic Rack First Edition Straight Bevel Gears for General Engineering and Heavy Engineering - Modules and Diametral Pitches First Edition Methods of Testing Cements - Determination of Strength First Edition Cement - Test Methods - Chemical Analysis First Edition Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 1: Direct-Hardening Unalloyed and Low-Alloyed Wrought Steel in Form of Different Black Products First Edition Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 9: Wrought Free-Cutting Steels First Edition Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 10: Wrought Nitriding Steels Second Edition Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 11: Wrought Case-Hardening Steels First Edition Heat-treatable steels, alloy steels and free-cutting steels Part 14: Hot-rolled steels for quenched and tempered springs Third Edition Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 15: Valve Steels for Internal Combustion Engines Second Edition Heat-Treated Steels, Alloy Steels and Free-Cutting Steels - Part 17: Ball and Roller Bearing Steels Second Edition Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 18: Bright Products of Unalloyed and Low Alloy Steels Second Edition Analysis of Soaps - Determination of Total Free Alkali First Edition Analysis of Soaps - Determination of Total Alkali Content and Total Fatty Matter Content First Edition


687 690 690-2 691 692 693 694 695 696 697 699 701 702-1 702-2 702-3 702-4 703 704 705 706 707 709 710-I 710-II 710-III 710-4 710-5

Solid mineral fuels Coke Determination of moisture in the general analysis test sample Second Edition Documentation - Bibliographic References - Content, Form and Structure Second Edition Information and Documentation - Bibliographic References - Part 2: Electronic Documents or Parts Thereof First Edition Assembly Tools for Screws and Nuts - Wrench and Socket Openings - Tolerances for General Use Fourth Edition Pulps - Determination of Alkali Solubility Second Edition Dimensions of Seam Welding Wheel Blanks First Edition Ships and Marine Technology - Positioning of Magnetic Compasses in Ships First Edition Glass - Resistance to Attack by a Boiling Aqueous Solution of Mixed Alkali - Method of Test and Classification Third Edition; PNS 1197: 1993 Surface Active Agents - Measurement of Foaming Power - Modified Ross-Miles Method First Edition Surface Active Agents - Washing Powders - Determination of Apparent Density - Method by Measuring the Mass of a Given Volume Second Edition Pulps - Determination of Alkali Resistance Second Edition International Gear Notation - Symbols for Geometrical Data Second Edition Machine Tools - Connecting Dimensions of Spindle Noses and Work Holding Chucks - Part 1: Conical Connection Second Edition Machine Tools - Spindle Noses and Face Plates - Sizes for Interchangeability - Part II: Camlock Type First Edition Machine Tools - Spindle Noses and Face Plates - Sizes for Interchangeability - Part III: Bayonet Type First Edition Machine tools Connecting dimensions of spindle noses and work holding chucks Part 4: Cylindrical connection First Edition Conveyor belts Transverse flexibility (troughability) Test method Third Edition [Superseded: ISO 703-1, ISO 703-1] Terminology Work - Principles and Methods Second Edition Rubber Latex - Determination of Density between 5 Degrees C and 40 Degrees C Second Edition Rubber Latex - Determination of Coagulum Content (Sieve Residue) Fourth Edition Milk and Milk Products - Guidance on Sampling Second Edition Essential Oils - Determination of Ester Value Second Edition Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part I: General Rules of Representation First Edition Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part II: Representation of Sedimentary Rocks First Edition Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part III: Representation of Magmatic Rocks First Edition Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part 4: Representation of Metamorphic Rocks First Edition Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part 5: Representation of Minerals Second Edition


710-6 710-7 711 712 713 714 715 717-1 717-2 718 719 720 721 722 723 724 727-1 727-2 728 729 730-1 730-2 732 734-1 734-2 735

Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part 6: Representation of Contact Rocks and Rocks Which Have Undergone Metasomatic, Pneumatolytic or Hydrothermal Transformation or Transformation by Weathering First Edition Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part 7: Tectonic Symbols First Edition Cereals and Cereal Products - Determination of Moisture Content (Basic Reference Method) Second Edition Cereals and Cereal Products - Determination of Moisture Content Routine Reference Method Third Edition Zinc - Determination of Lead and Cadmium Contents - Polarographic Method First Edition Zinc - Determination of Iron Content - Photometric Method First Edition Zinc - Determination of Lead Content - Polarographic Method First Edition Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation Second Edition; Amendment 1: 08/15/2006 Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation Second Edition; Amendment 1: 08/15/2006 Laboratory Glassware - Thermal Shock and Thermal Shock Endurance - Test Methods Second Edition Glass - Hydrolytic Resistance of Glass Grains at 98 Degrees C - Method of Test and Classification Second Edition Glass - Hydrolytic Resistance of Glass Grains at 121 Degrees C - Method of Test and Classification Second Edition Rock Drilling Equipment - Integral Stems Second Edition Rock Drilling Equipment - Hollow Drill Steels in Bar Form, Hexagonal and Round Third Edition Rock Drilling Equipment - Forged Collared Shanks and Corresponding Chuck Bushings for Hollow Hexagonal Drill Steels Second Edition ISO General-Purpose Metric Screw Threads - Basic Dimensions Second Edition Fittings Made From Unplasticized Poly(Vinyl Chloride) (PVC-U), Chlorinated Poly(Vinyl Chloride) (PVC-C) or Acrylonitrile/Butadiene/Styrene (ABS) With Plain Sockets for Pipes Under Pressure - Part 1: Metric Series First Edition Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure Part 2: Inch-based series Second edition Coke (Nominal Top Size Greater Than 20 mm) - Size Analysis by Sieving Third Edition Oilseeds - Determination of Acidity of Oils Second Edition Agricultural Wheeled Tractors - Rear-Mounted Three-Point Linkage - Part 1: Categories 1, 2, 3 and 4 Third Edition; Corrigendum 11995 Agricultural Wheeled Tractors - Three-Point Linkage - Part II: Category 1 N (Narrow Hitch) First Edition Photography - 120-Size and 220-Size Films - Dimensions Fourth Edition Oilseed meals Determination of oil content Part 1: Extraction method with hexane (or light petroleum) Second Edition Oilseed Residues - Determination of Oil Content - Part 2: Rapid Extraction Method First Edition; Together with ISO 734-1: 1998, it Cancels and Replaces ISO 734: 1979 Oilseed Residues - Determination of Ash Insoluble in Hydrochloric Acid First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

737 738 739 740 746 748 749 750 751 752 CORR 1 752 756-1 758 759 760 762 763 764 765 769 770 771 772 776 777 778 779 780 783 787-1 787-2

Coniferous Sawn Timber - Sizes - Methods of Measurement First Edition Coniferous Sawn Timber - Sizes - Permissible Deviations and Shrinkage First Edition Sodium Carbonate for Industrial Use - Preparation and Storage of Test Samples First Edition Sodium Carbonate for Industrial Use - Determination of Total Soluble Alkalinity - Titrimetric Method First Edition Sodium Carbonate for Industrial Use - Determination of Matter Insoluble in Water at 50 Degrees Celsius First Edition Measurement of Liquid Flow in Open Channels - Velocity-Area Methods Third Edition Oilseed Residues - Determination of Total Ash First Edition Fruit and Vegetable Products - Determination of Titratable Acidity Second Edition Fruit and Vegetable Products - Determination of Water-Insoluble Solids Second Edition Zinc ingots TECHNICAL CORRIGENDUM 1 Second Edition Zinc ingots Second Edition Propan-2-ol for Industrial Use - Methods of Test - Part 1: General First Edition Liquid Chemical Products for Industrial Use - Determination of Density at 20 Degrees Celsius First Edition Volatile Organic Liquids for Industrial Use - Determination of Dry Residue After Evaporation on a Water Bath - General Method First Edition Determination of Water - Karl Fischer Method (General Method) First Edition Fruit and vegetable products Determination of mineral impurities content Second Edition Fruit and vegetable products Determination of ash insoluble in hydrochloric acid Second Edition Horology - Magnetic Resistant Watches Third Edition Pesticides Considered Not to Require Common Names First Edition Fibre Building Boards - Hard and Medium Boards - Determination of Water Absorption and of Swelling in Thickness After Immersion in Water First Edition Crude or Rectified Oils of Eucalyptus Globulus (Eucalyptus Globulus Labil.) Second Edition Oilseed Residues - Determination of Moisture and Volatile Matter Content First Edition Hydrometric Determinations - Vocabulary and Symbols Fourth Edition; Amendment 1:11/15/2002; Amendment 2: 05/01/2004 Pulps - Determination of Acid-Insoluble Ash Second Edition Paper, board and pulp - Determination of acid-soluble calcium Third Edition Paper, board and pulp - Determination of acid-soluble copper Third Edition Paper, Board and Pulp - Determination of Iron Second Edition Packaging - Pictorial Marking for Handling of Goods Fourth Edition Metallic Materials - Tensile Testing at Elevated Temperature Second Edition General Methods of Test for Pigments and Extenders - Part 1: Comparison of Colour of Pigments First Edition General Methods of Test for Pigments and Extenders - Part 2: Determination of Matter Volatile at 105 Degrees Celsius First Edition; CEN

ISO Library

Documents

Transcript of ISO Library