ISO API Calibration Standards
-
Upload
john-green -
Category
Documents
-
view
1.048 -
download
1
Transcript of ISO API Calibration Standards
ISO/TC 28/SC 2
Measurement of petroleum and related products
Secretary: Paula Watkins, American Petroleum Institute, 1220 L Street NW, Washington, DC 20005, USA
Tel: +1 202 682 8197 Fax: +1 202 962 4797 E-Mail: [email protected]
2009-02-10
ISO/TC 28/SC 2 N 539
Report of ISO/TC 28/SC 2/WG 9 Tank calibration, to ISO/TC 28/SC 2 for plenary meeting, 17 February 2009, London Attached is the report provided the Convenor, Srini Sivaraman, which will be discussed under agenda item 6.4 at the forthcoming ISO/TC 28/SC 2 plenary meeting to be held on 17 February 2009 in London. Yours sincerely
Paula Watkins Paula Watkins Secretary to ISO/TC 28/SC 2
2
ISO TC 28/SC2/WG9: Report
ISO 7507 -4 Document - Revision and ballot comments- resolution completed. Document forwarded for
processing toward publication.
New work proposal has been submitted for approval in revising tank calibration standards on Horizontal Tanks
(12917 Parts 1 and 2) to include uncertainty analysis
Subject to approval of the new work items, next meeting is likely to be held in Vienna, Austria some time in
September 2009
Srini Sivaraman
February 10, 2009
3
Summary of the status of the ISO/TC 28/SC 2/WG 9 standards
ISO Status
Year of
publication
(confirmation)
Related
API
MPMS
Chapter
Title Additional comments
4269 IS/01 (06) 2555
Petroleum and liquid petroleum products
– Tank calibration by liquid
measurement – Incremental method
using volumetric meters
First edition published on 2001-03-15.
Due for ISO systematic review in 2011.
7507-1 IS/03 2.2A Petroleum and liquid petroleum products
– Calibration of vertical cylindrical tanks
– Part 1: Strapping method
Second edition published on 2003-12-15.
Under systematic review (ballot initiated
on 2008-10-15 and terminates on 2009-
03-16).
7507-2 IS/05 (08) 2.2B Petroleum and liquid petroleum products
– Calibration of vertical cylindrical tanks
– Part 2: Optical-reference-line method
Second edition published on 2005-06-01.
Confirmed following systematic review in
2008. Due for next ISO systematic review
in 2013.
7507-3 IS/06 2.2C Petroleum and liquid petroleum products
– Calibration of vertical cylindrical tanks
– Part 3: Optical-triangulation method
Second edition published on 2006-07-15.
Due for ISO systematic review in 2009.
7507-4 IS/95
DIS/08
2.2D Petroleum and liquid petroleum products
– Calibration of vertical cylindrical tanks
– Part 4: Internal electro-optical distance
ranging method
First edition published on 1995-07-15.
Under revision following ISO systematic
review in 2005. DIS ballot terminated on
2008-07-21. 0 negative votes. Comments
resolved by WG and final text under
preparation.
7507-5 IS/00 (08) – Petroleum and liquid petroleum products
– Calibration of vertical cylindrical tanks
– Part 5: External electro-optical distance
ranging method
First edition published on 2000-07-01.
Originally agreed to be revised following
systematic review in 2005, but listed as a
PWI while other projects were completed.
In 2008 WG recommended that a revision
was not progressed, and the standard was
listed as confirmed instead. Due for next
ISO systematic review in 2013.
7507-6 TR/97 – Petroleum and liquid petroleum products
– Calibration of vertical cylindrical tanks
– Part 6: Recommendations for
monitoring, checking and verification of
tank calibration and capacity table
Published as a type 2 TR on 1997-11-01.
TR withdrawn when incorporated as
Annex B of ISO 7507-1:2003.
12917-1 IS/02 (07) 2551
2.2E
Petroleum and liquid petroleum products
– Calibration of horizontal cylindrical
tanks – Part 1: Manual methods
First edition published on 2002-07-01.
Corrected and reprinted 2002-09-15.
Confirmed following systematic review in
2007 (SC 2 Res. 7/2007 – N501) but WG
requested to review comments in order to
consider initiating a revision as other
priorities allow. WG 9 developing an NP
to propose revision.
12917-2 IS/02 (08) 2.2F Petroleum and liquid petroleum products
– Calibration of horizontal cylindrical
tanks – Part 2: Internal electro-optical
distance-ranging method
First edition published on 2002-09-15.
Confirmed following systematic review in
2008. Due for next ISO systematic review
in 2013. WG 9 developing an NP to
propose revision.
16662 NP/97 – Petroleum and liquid petroleum products
– Tank calibration methods –
Uncertainty analysis
NP (28/SC 3 N 696) results reviewed by
AG (see 28/AG N 203). WG 1 invited to
prepare a WD (Res. 7 of 28/AG N 206).
However, SC 3/WG 1 decided on an
alternative approach to include an annex
on uncertainty analysis in ISO 7507 Parts
1-3.