ISO 9001:2015 Silencer Catalog
Transcript of ISO 9001:2015 Silencer Catalog
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
1
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
Silencer Catalog
Your Exhaust System Components Solution
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
4010 NW 39th St, Lincoln, NE 68524www.inExhaust.com | 402.322.7022 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Rev030619-A
For products not included in the catalog, please contact us for a quote.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
CRITICAL GRADE 600C
600C Slim Series Silencer – No Packing
5601C Slim Series Silencer – 1” Packing
6602C Slim Series Silencer - 2” Packing
HOSPITAL GRADE 600H
601H Slim Series Silencer - 1” Packing
8 602H Slim Series Silencer - 2” Packing
9
RESIDENTIAL GRADE 700R
700R Disk Series Silencer - No Packing
10 701R Disk Silencer - 1” Packing
CRITICAL GRADE 700C
700C Disk Silencer – No Packing 11
701C Disk Silencer - 1” Packing 12
702C Disk Silencer - 2” Packing 13
HOSPITAL GRADE 700H
701H Disk Silencer - 1” Packing 14
702H Disk Silencer - 2” Packing
Silencer Series Page(s)
Table of Contents
INDUSTRIAL GRADE 900I
900I Cylindrical Silencer
RESIDENTIAL GRADE 900R
900R Cylindrical Silencer
CRITICAL GRADE 900C
900C Cylindrical Silencer
HOSPITAL GRADE 900H
900H Cylindrical Silencer
17
18
7
4
700SA SERIES
15
800 SERIES
16
90SA SERIES
19
20
21
22
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
3
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
TERMS & CONDITIONS
STANDARD WARRANTY
SILENCER INSTALLATION GUIDE 24-26
27-28
29-30
EXPLOSION RELIEF COVER KITS 23
Other Page(s)
Table of Contents
Schema Example
Family/Series
Inlet(s)
Packing
Grade
Style
Brackets
7
0
1
C
2
04
N
Disk Silencer
0 (Single inlet), 2 (Dual inlets)
0 (No packing), 1 (1” Packing), 2 (2” Packing)
R (Residential), C (Critical), H (Hospital)
1 (End in/end out), 2 (Side in/end out), 3 (Side in/side out)
Size in inches. Ex: 04 = 4 inches
N (No brackets), T (Top brackets), B (Bottom brackets)
Sub-Family SA SA (Spark Arrestor), AF (Annual Flow), T (Turbo)
Schema Example Available Options
Nominal Size
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
4
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E DSlim Series
INSER
TIO
N L
OSS
IN
DEC
IBEL
S
(Ref
. 0.
0002
Mic
roba
rs)
Typical Attenuation Curve 600C Series Silencer Octave Band Application
• Engineered to provide a high degree of attenuation in a low, space-saving design.
• Good where ambient noise levels are relatively low.
• Excellent for any application where size restriction is a critical factor.
• Standard finish is high heat black.• No internal packing.• Ideal for use where heat loss is not a
critical factor.• Typical Attenuation: 31 to 38 dBA
Part Number600C2-04
600C2-05
600C2-06
600C2-08
600C2-10
600C2-12
600C2-14
600C2-16
600C2-18
600C2-20
A
4
5
6
8
10
12
14
16
18
20
B
9
10
11
13
16
19
21
23
25
28
C
26
28
32
42
50
60
62
72
82
86
OAL 1
34
35
39
52
58
68
72
81
92
96
OAL 230
31
35
48
54
64
68
77
88
92
OAL 326
27
31
44
50
60
64
73
84
88
F min5
6
7
8
9
10
11
12
6
14
gmin5
6
7
8
9
10
11
12
6
14
H/J
8.5
9
9.5
10.5
12
13.5
14.5
15.5
16.5
18
WT
105
140
190
355
515
720
860
1,195
1,460
1,775
Style 1 Style 2 Style 3
CENTER FREQUENCY, Hz
F max
8
17
16
23
26
32
34
38
45
46
600C Dimensions (inches)
Critical Grade 600C
Critical Grade OptionsAll 600 series are all-welded heavy duty carbon steel. Available in three options: 600C, 601C, 602C.
125/150# ANSI Pattern flanged inlet and outlet. Side inlet, end outlet. (Style 2)Flush mount inlet good for applications where space is extremely limited. *Flanged connections can be replaced with ID cuff, OD tube, NPT, etc. *
Flush Mount Option
Connection OptionsAdditional OptionsStandard Connections
Options
• Available with mounting brackets. (See schema)
• Leak testing – per request, fee applicable
• Stainless steel *
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
5
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
Application• Engineered to provide a high degree
of attenuation in a low, space-saving design.
• Features compressed thermal/acoustical fiberglass packed shells.
• 1” thick packed shell design provides significant reduction of outer surface temp.
• Actual values depend on exhaust temp and ambient conditions.
• Ideal for enclosures or restricted areas where heat is critical.
• Typical Attenuation: 34 to 40 dBA
601C2-04
601C2-05
601C2-06
601C2-08
601C2-10
601C2-12
601C2-14
601C2-16
601C2-18
601C2-20
4
5
6
8
10
12
14
16
18
20
10
10
12
14
16
20
22
24
26
28
26
27
31
43
50
60
63
72
82
86
34
35
39
52
58
68
72
81
92
96
30
31
35
48
54
64
68
77
88
92
26
27
31
44
50
60
64
73
84
88
5
6
7
8
9
10
11
12
6
14
5
6
7
8
9
10
11
12
6
14
9
9
10
11
12
14
15
16
17
18
125
150
225
395
550
780
945
1,305
1,590
1,905
15
15
16
23
26
32
34
38
45
46
CENTER FREQUENCY, Hz
INSER
TIO
N L
OSS
IN
DEC
IBEL
S
(Ref
. 0.
0002
Mic
roba
rs)
601C Dimensions (inches)
Typical Attenuation Curve 601C Series Silencer Octave Band
Slim Series
Critical Grade 601C
Part Number A B C OAL
1OAL
2OAL
3F
ming
min H/J WTF max
Critical Grade Options
125/150# ANSI Pattern flanged inlet and outlet. Side inlet, end outlet. (Style 2)Flush mount inlet good for applications where space is extremely limited. *Flanged connections can be replaced with ID cuff, OD tube, NPT, etc. *
Flush Mount Option
Connection OptionsAdditional OptionsStandard Connections
Options
• Available with mounting brackets. (See schema)
• Leak testing – per request, fee applicable
• Stainless steel *
All 600C series are all-welded heavy duty carbon steel. Available in three options: 600C, 601C, 602C
Style 1 Style 2 Style 3
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
6
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
INSER
TIO
N L
OSS
IN
DEC
IBEL
S
(Ref
. 0.
0002
Mic
roba
rs)
Typical Attenuation Curve 602C Series Silencer Octave Band Application
• Engineered to provide a high degree of attenuation in a low, space-saving design.
• Features compressed thermal/acoustical fiberglass packed shells.
• 2” thick packed shell design provides significant reduction of outer surface temp.
• Actual values depend on exhaust temp and ambient conditions.
• Ideal for enclosures or restricted areas where heat is critical.
• Typical Attenuation: 35 to 42 dBA
602C2-04
602C2-05
602C2-06
602C2-08
602C2-10
602C2-12
602C2-14
602C2-16
602C2-18
602C2-20
4
5
6
8
10
12
14
16
18
20
12
12
14
16
18
22
24
26
28
30
28
29
33
45
52
62
65
74
84
88
36
37
41
54
60
70
74
83
94
98
32
33
37
50
56
66
70
79
90
94
28
29
33
46
52
62
66
75
86
90
6
6
8
9
10
11
12
14
7
15
6
6
8
9
10
11
12
14
7
15
8.5
9
9.5
10.5
12
13.5
14.5
15.5
16.5
18
135
165
245
425
605
850
1,024
1,365
1,750
2,055
15
15
17
24
27
33
34
39
46
47
CENTER FREQUENCY, Hz
602C Dimensions (inches)
Slim Series
Critical Grade 602C
Part Number A B C OAL
1OAL
2OAL
3F
ming
min H/J WTF max
Critical Grade OptionsAll 600 series are all-welded heavy duty carbon steel. Available in three options: 600C, 601C, 602C.
125/150# ANSI Pattern flanged inlet and outlet. Side inlet, end outlet. (Style 2)Flush mount inlet good for applications where space is extremely limited. *Flanged connections can be replaced with ID cuff, OD tube, NPT, etc. *
Flush Mount Option
Connection OptionsAdditional OptionsStandard Connections
Options
• Available with mounting brackets. (See schema)
• Leak testing – per request, fee applicable
• Stainless steel *
Style 1 Style 2 Style 3
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
7
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
Typical Attenuation Curve 601H Series Silencer Octave Band
INSER
TIO
N L
OSS
IN
DEC
IBEL
S
(Ref
. 0.
0002
Mic
roba
rs)
• Engineered to provide a high degree of attenuation in a low, space-saving design.
• Ideal where ambient noise levels are very low and/or where size restriction is a critical factor.
• Features compressed thermal/acoustical fiberglass packed shells.
• 1” thick packed shell design provides significant reduction of outer surface temp.
• Actual values depend on exhaust temp and ambient conditions.
• Typical Attenuation: 37 to 44 dBA
601H2-04
601H2-05
601H2-06
601H2-08
601H2-10
601H2-12
601H2-14
601H2-16
601H2-18
601H2-20
4
5
6
8
10
12
14
16
18
20
10
10
12
14
16
20
22
24
26
28
26
27
31
43
50
60
63
72
82
86
34
35
39
52
58
68
72
81
92
96
30
31
35
48
54
64
68
77
88
92
26
27
31
44
50
60
64
73
84
88
5
6
7
8
9
10
11
12
6
14
5
6
7
8
9
10
11
12
6
14
9
9
10
11
12
14
15
16
17
18
125
150
225
395
550
780
945
1,305
1,590
1,905
15
18
20
27
31
37
36
39
45
47
CENTER FREQUENCY, Hz
Application
601H Dimensions (inches)
Slim Series
Hospital Grade 601H
Part Number A B C OAL
1OAL
2OAL
3F
ming
min H/J WTF max
125/150# ANSI Pattern flanged inlet and outlet. Side inlet, end outlet. (Style 2)Flush mount inlet good for applications where space is extremely limited. *Flanged connections can be replaced with ID cuff, OD tube, NPT, etc. *
Flush Mount Option
Connection OptionsAdditional OptionsStandard Connections
Options
• Available with mounting brackets. (See schema)
• Leak testing – per request, fee applicable
• Stainless steel *
All 600H series are all-welded heavy duty carbon steel. Available in two options: 601H, 602H
Hospital Grade Options
Style 1 Style 2 Style 3
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
8
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
Typical Attenuation Curve 602H Series Silencer Octave Band
INSER
TIO
N L
OSS
IN
DEC
IBEL
S
(Ref
. 0.
0002
Mic
roba
rs)
• Engineered to provide a high degree of attenuation in a low, space-saving design.
• Ideal where ambient noise levels are very low and/or where size restriction is a critical factor.
• Features compressed thermal/acoustical fiberglass packed shells.
• 2” thick packed shell design provides significant reduction of outer surface temp.
• Actual values depend on exhaust temp and ambient conditions.
• Typical Attenuation: 39 to 46 dBA
602H2-04
602H2-05
602H2-06
602H2-08
602H2-10
602H2-12
602H2-14
602H2-16
602H2-18
602H2-20
4
5
6
8
10
12
14
16
18
20
12
12
14
16
18
22
24
28
30
34
34
34
38
53
59
70
70
75
86
92
42
42
46
60
67
78
78
84
96
102
38
38
42
56
63
74
74
80
92
98
34
34
38
52
59
70
70
76
88
94
6
7
8
9
10
11
12
14
7
15
6
7
8
9
10
11
12
14
7
15
10
10
11
12
13
15
16
18
19
21
195
215
295
575
790
1,065
1,220
1,450
1,875
2,220
16
19
21
28
32
38
37
40
47
48
CENTER FREQUENCY, Hz
Application
602H Dimensions (inches)
Slim Series
Part Number A B C OAL
1OAL
2OAL
3F
ming
min H/J WTF max
125/150# ANSI Pattern flanged inlet and outlet. Side inlet, end outlet. (Style 2)Flush mount inlet good for applications where space is extremely limited. *Flanged connections can be replaced with ID cuff, OD tube, NPT, etc. *
Flush Mount Option
Connection OptionsAdditional OptionsStandard Connections
Options
• Available with mounting brackets. (See schema)
• Leak testing – per request, fee applicable
• Stainless steel *
All 600H series are all-welded heavy duty carbon steel. Available in two options: 601H, 602H
Hospital Grade Options
Hospital Grade 602H
Style 1 Style 2 Style 3
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
9
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
Typical Attenuation Curve 700R Series Silencer Octave Band
INSER
TIO
N L
OSS
IN
DEC
IBEL
S
(Ref
. 0.
0002
Mic
roba
rs) • Engineered for applications where
ambient noise levels are moderate.• Good for use in enclosures, marines,
trailers or any application where size restriction is a critical factor and/or where heat loss is not a critical factor.
• Standard finish is high heat black.• Internal unpacked disk silencer.• Typical Attenuation: 19 to 26 dBA
Part Number700R2-04
700R2-05
700R2-06
700R2-08
700R2-10
700R2-12
700R2-14
700R2-16
700R2-18
A Inlet Size
4
5
6
8
10
12
14
16
18
B Diameter
C OAL
20
22
24
32
38
45
50
58
62
24
26
28
36
42
49
54
62
66
7
8
10
12
14
16
18
20
24
84
98
116
191
260
397
510
615
767
7.5
8
9
10
11
12
13
14
16
CENTER FREQUENCY, Hz
Application
700R Dimensions (inches)
H K WT
Disk Series
Residential Grade 700R
125/150# ANSI Pattern flanged inlet and outlet. Side inlet, end outlet. (Style 2)Flush mount inlet good for applications where space is extremely limited. *Flanged connections can be replaced with ID cuff, OD tube, NPT, etc. *
Flush Mount Option
Connection OptionsAdditional OptionsStandard Connections
Options
• Available with mounting brackets. (See schema)
• Leak testing – per request, fee applicable
• Stainless steel *
Residential Grade OptionsAll 700R feature all-welded heavy duty carbon steel construction. Available in two options: 700R, 701R
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
10
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
INSER
TIO
N L
OSS
IN
DEC
IBEL
S
(Ref
. 0.
0002
Mic
roba
rs) • Engineered for applications where
ambient noise levels are moderate.• Good for use in enclosures, marines,
trailers or any application where size restriction is a critical factor and/or where heat loss is not a critical factor.
• 1” thick packed shell design provides significant reduction of outer surface temp.
• Actual values depend on exhaust temp and ambient conditions.
• Standard finish is high heat black• Typical Attenuation: 22 to 28 dBA
701R2-04
701R2-05
701R2-06
701R2-08
701R2-10
701R2-12
701R2-14
701R2-16
701R2-18
4
5
6
8
10
12
14
16
18
22
24
26
34
40
47
52
60
64
26
28
30
38
44
51
56
64
68
7
8
11
13
15
17
19
21
25
96
116
131
222
310
415
545
660
820
7.5
8
9.5
10.5
11.5
12.5
13
14.5
15.5
CENTER FREQUENCY, Hz
Application
701R Dimensions (inches)
Typical Attenuation Curve 701R Series Silencer Octave Band
Disk Series
Residential Grade 701R
125/150# ANSI Pattern flanged inlet and outlet. Side inlet, end outlet. (Style 2)Flush mount inlet good for applications where space is extremely limited. *Flanged connections can be replaced with ID cuff, OD tube, NPT, etc. *
Flush Mount Option
Connection OptionsAdditional OptionsStandard Connections
Options
• Available with mounting brackets. (See schema)
• Leak testing – per request, fee applicable
• Stainless steel *
Residential Grade OptionsAll 700R feature all-welded heavy duty carbon steel construction. Available in two options: 700R, 701R
Part Number
A Inlet Size
B Diameter
C OAL H K WT
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
11
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
Typical Attenuation Curve 700C Series Silencer Octave Band
INSER
TIO
N L
OSS
IN
DEC
IBEL
S
(Ref
. 0.
0002
Mic
roba
rs) • Engineered for applications where
ambient noise levels are low.• Good for use in enclosures, marines,
trailers or any application where size restriction is a critical factor and/or where heat loss is not a critical factor.
• Internal unpacked disk silencer.• Typical Attenuation: 27 to 31dBA
700C2-04
700C2-05
700C2-06
700C2-08
700C2-10
700C2-12
700C2-14
700C2-16
700C2-18
4
5
6
8
10
12
14
16
18
26
28
32
45
52
60
65
74
84
30
32
36
49
56
64
69
78
88
7
8
10
12
14
16
20
22
24
102
132
176
332
481
662
800
1,105
1,354
7.5
8
9
10
11
12
14
15
16
CENTER FREQUENCY, Hz
Application
700C Dimensions (inches)
Disk Series
Critical Grade 700C
125/150# ANSI Pattern flanged inlet and outlet. Side inlet, end outlet. (Style 2)Flush mount inlet good for applications where space is extremely limited. *Flanged connections can be replaced with ID cuff, OD tube, NPT, etc. *
Flush Mount Option
Connection OptionsAdditional OptionsStandard Connections
Options
• Available with mounting brackets. (See schema)
• Leak testing – per request, fee applicable
• Stainless steel *
Critical Grade OptionsAll 700C feature all-welded heavy duty carbon steel. The Critical Grade 700C Line is available in three options: 700C, 701C, 702C
Part Number
A Inlet Size
B Diameter
C OAL H K WT
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
12
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
Typical Attenuation Curve 701C Series Silencer Octave Band
INSER
TIO
N L
OSS
IN
DEC
IBEL
S
(Ref
. 0.
0002
Mic
roba
rs)
• Engineered for applications where ambient noise levels are low.
• Good for use in enclosures, marines, trailers or any application where size restriction is a critical factor.
• Features compressed thermal/acoustical fiberglass packed shell.
• 1” thick packed shell design provides significant reduction of outer surface temp.
• Actual values depend on exhaust temp and ambient conditions.
• Standard finish is high heat black.• Typical Attenuation: 30 to 34 dBA
701C2-04
701C2-05
701C2-06
701C2-08
701C2-10
701C2-12
701C2-14
701C2-16
701C2-18
4
5
6
8
10
12
14
16
18
26
28
32
45
52
60
65
74
84
30
32
36
49
56
64
69
78
88
7
8
10
12
14
16
20
22
24
110
140
190
355
515
710
855
1,180
1,450
7.5
8
9
10
11
12
14
15
16
CENTER FREQUENCY, Hz
701C Dimensions (inches)
Application
Disk Series
Critical Grade 701C
125/150# ANSI Pattern flanged inlet and outlet. Side inlet, end outlet. (Style 2)Flush mount inlet good for applications where space is extremely limited. *Flanged connections can be replaced with ID cuff, OD tube, NPT, etc. *
Flush Mount Option
Connection OptionsAdditional OptionsStandard Connections
Options
• Available with mounting brackets. (See schema)
• Leak testing – per request, fee applicable
• Stainless steel *
Critical Grade OptionsAll 700C feature all-welded heavy duty carbon steel. The Critical Grade 700C Line is available in three options: 700C, 701C, 702C
Part Number
A Inlet Size
B Diameter
C OAL H K WT
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
13
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
Typical Attenuation Curve702C Series Silencer Octave Band
INSER
TIO
N L
OSS
IN
DEC
IBEL
S
(Ref
. 0.
0002
Mic
roba
rs)
• Engineered for applications where ambient noise levels are low.
• Good for use in enclosures, marines, trailers or any application where size restriction is a critical factor, and/or where heat loss is extremely critical.
• Features compressed thermal/acoustical fiberglass packed shell.
• 2” thick packed shell design provides significant reduction of outer surface temp.
• Actual values depend on exhaust temp and ambient conditions.
• Standard finish is high heat black• Typical Attenuation: 32 to 36 dBA
702C2-04
702C2-05
702C2-06
702C2-08
702C2-10
702C2-12
702C2-14
702C2-16
702C2-18
4
5
6
8
10
12
14
16
18
28
30
34
47
54
62
67
76
86
32
34
38
51
58
66
71
80
90
9
10
12
14
16
18
22
24
26
125
181
215
375
565
815
955
1,310
1,630
8.5
9
10
11
12
13
15
16
17
CENTER FREQUENCY, Hz
Application
702C Dimensions (inches)
Disk Series
Critical Grade 702C
125/150# ANSI Pattern flanged inlet and outlet. Side inlet, end outlet. (Style 2)Flush mount inlet good for applications where space is extremely limited. *Flanged connections can be replaced with ID cuff, OD tube, NPT, etc. *
Flush Mount Option
Connection OptionsAdditional OptionsStandard Connections
Options
• Available with mounting brackets. (See schema)
• Leak testing – per request, fee applicable
• Stainless steel *
Critical Grade OptionsAll 700C feature all-welded heavy duty carbon steel. The Critical Grade 700C Line is available in three options: 700C, 701C, 702C
Part Number
A Inlet Size
B Diameter
C OAL H K WT
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
14
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
Typical Attenuation Curve 701H Series Silencer Octave Band
INSER
TIO
N L
OSS
IN
DEC
IBEL
S
(Ref
. 0.
0002
Mic
roba
rs)
• Engineered for applications where ambient noise levels are very low, and a high degree of attenuation is required.
• Good for use in enclosures, marines, trailers or any application where size restriction is a critical factor
• Features compressed thermal/acoustical fiberglass packed shell
• 1” thick packed shell design provides significant reduction of outer surface temp.
• Actual values depend on exhaust temp and ambient conditions.
• Standard finish is high heat black.• Typical Attenuation: 33 to 38 dBA
701H2-04
701H2-05
701H2-06
701H2-08
701H2-10
701H2-12
701H2-14
701H2-16
701H2-18
4
5
6
8
10
12
14
16
18
30
32
36
50
58
70
72
74
84
34
36
40
54
60
74
76
78
88
8
9
10
12
14
16
22
26
28
146
179
235
492
575
908
1,039
1,138
1,597
8
8.5
9
10
11
12
15
17
18
CENTER FREQUENCY, Hz
Application
701H Dimensions (inches)
Disk Series
Hospital Grade 701H
125/150# ANSI Pattern flanged inlet and outlet. Side inlet, end outlet. (Style 2)Flush mount inlet good for applications where space is extremely limited. *Flanged connections can be replaced with ID cuff, OD tube, NPT, etc. *
Flush Mount Option
Connection OptionsAdditional OptionsStandard Connections
Options
• Available with mounting brackets. (See schema)
• Leak testing – per request, fee applicable
• Stainless steel *
Hospital Grade OptionsAll 700H feature all-welded heavy duty carbon steel. The Hospital Grade 700H Line is available in two options: 701H, 702H
Part Number
A Inlet Size
B Diameter
C OAL H K WT
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
15
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
Typical Attenuation Curve 702H Series Silencer Octave Band
INSER
TIO
N L
OSS
IN
DEC
IBEL
S
(Ref
. 0.
0002
Mic
roba
rs) • Engineered for applications where
ambient noise levels are low, and a high degree of attenuation is required.
• Good for use in enclosures, marines, trailers or any application where size restriction is a critical factor, and/or where heat loss is extremely critical.
• Features compressed thermal/acoustical fiberglass packed shell.
• 2” thick packed shell design provides significant reduction of outer surface temp.
• Actual values depend on exhaust temp and ambient conditions.
• Standard finish is high heat black.• Typical Attenuation: 34 to 40 dBA
702H2-04
702H2-05
702H2-06
702H2-08
702H2-10
702H2-12
702H2-14
702H2-16
702H2-18
4
5
6
8
10
12
14
16
18
32
34
38
52
60
72
74
76
86
36
38
42
56
64
76
78
80
90
10
11
12
14
16
18
24
28
30
170
205
276
550
756
1,005
1,144
1,364
1,755
9
9.5
10
11
12
13
16
18
19
CENTER FREQUENCY, Hz
Application
702H Dimensions (inches)
Disk Series
Hospital Grade 702H
125/150# ANSI Pattern flanged inlet and outlet. Side inlet, end outlet. (Style 2)Flush mount inlet good for applications where space is extremely limited. *Flanged connections can be replaced with ID cuff, OD tube, NPT, etc. *
Flush Mount Option
Connection OptionsAdditional OptionsStandard Connections
Options
• Available with mounting brackets. (See schema)
• Leak testing – per request, fee applicable
• Stainless steel *
Hospital Grade OptionsAll 700H feature all-welded heavy duty carbon steel. The Hospital Grade 700H Line is available in two options: 701H, 702H
Part Number
A Inlet Size
B Diameter
C OAL H K WT
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
16
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D700SA Series - Spark Arrestor
Disk Series
• Sound Attenuation: Residential Grade (18-25 dBA) Critical Grade (23-30 dBA) Hospital Grade (28-35 dBA)• Construction: Standard all welded heavy-duty carbon steel, ANSI Flange inlet/outlet, 1” and 2” internal
packing.• Standard finish is high heat black.• Stainless steel and custom design available upon request.
Application
A spark arresting Disk silencer ideal for applications in which overall height is critical and/or low radiated heat is necessary. For use on exhaust of internal combustion engines where fire hazards exist. Designed to utilize centrifugal force to separate solids from the exhaust gas stream and deposited in an easily accessible cleanout.
To place an order, please contact [email protected] or 402.322.7022
Standard specifications coming soon.
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
17
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D800 Series
Compact Series
Application• Sound Attenuation: Residential Grade (18-25 dBA) Critical Grade (23-28 dBA) Hospital Grade (25-30 dBA)• Construction: Standard all welded heavy-duty carbon steel, ID Slotted cuff inlet, OD plain tube outlet.• High-density compressed thermal/acoustical insulation-packed shell.• Standard finish is high heat black.• Stainless steel and custom design available upon request.
Advanced design provides high attenuation and low pressure drop in a space saving compact size.
To place an order, please contact [email protected] or 402.322.7022
Standard specifications coming soon.
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
18
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
Typical Attenuation Curve 900I Series Silencer Octave Band
INSER
TIO
N L
OSS
IN
DEC
IBEL
S
(Ref
. 0.
0002
Mic
roba
rs)
• Engineered for applications where ambient noise levels are high.
• May be installed in any position.• Standard finish is high heat black• Typical Attenuation: 14 to 20 dBA
CENTER FREQUENCY, Hz
Application
Part Number900I2-04
900I2-05
900I2-06
900I2-08
900I2-10
900I2-12
900I2-14
A
4
5
6
8
10
12
14
B
10
10
12
18
22
26
30
36
42
42
49
62
63
76
D
33
39
39
45
59
59
73
E
30
36
36
42
56
56
70
F min5
5
8
12
13
15
6
H
5
5
8
12
12
15
6
WT
24
27
35
110
164
259
346
F max13
16
16
18
25
23
31
900I Dimensions (inches)
G min5
5
6
8
12
13
15
C OAL 1
Cylindrical Series
Industrial Grade 900I
125/150# ANSI Pattern flanged inlet and outlet. Side inlet, end outlet.Flanged connections can be replaced with ID cuff, OD tube, NPT, etc. *
Connection OptionsAdditional OptionsStandard Connections
Options
Industrial Grade OptionsAll-welded heavy duty steel construction.
• Leak testing – per request, fee applicable
• Stainless steel *
Style 1 Style 2 Style 3
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
19
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
Style 1 Style 2 Style 3
Typical Attenuation Curve 900R Series Silencer Octave Band
INSER
TIO
N L
OSS
IN
DEC
IBEL
S
(Ref
. 0.
0002
Mic
roba
rs) • Engineered for applications where
ambient noise levels are moderate.• Good for use stationary, mobile, and
marine power units.• May be installed in any position.• Heavy-duty steel construction.• Standard finish is high heat black.• Typical Attenuation: 19 to 25 dBA
CENTER FREQUENCY, Hz
Application
900R2-04
900R2-05
900R2-06
900R2-08
900R2-10
900R2-12
900R2-14
900R2-16
900R2-18
900R2-20
4
5
6
8
10
12
14
16
18
20
10
10
12
18
22
26
30
36
36
42
46
54
54
61
74
75
100
114
126
139
43
51
51
57
71
72
97
111
123
136
40
48
48
54
67
69
94
109
119
133
5
6
6
8
12
13
15
17
18
20
20
26
23
31
30
44
56
55
24
72
5
6
8
12
13
15
17
18
6
20
29
34
43
124
182
299
413
585
733
1,013
8
9
9
13
15
17
19
22
22
25
900R Dimensions (inches)
900R2-22
900R2-24
22
24
48
54
141
142
138
139
136
137
22
24
65
64
22
24
1,192
1,404
29
31
Part Number A B WTC
OAL 1D
OAL 2E
OAL 3F
minF
max H G min
Cylindrical Series
Residential Grade 900R
125/150# ANSI Pattern flanged inlet and outlet. Side inlet, end outlet.Flanged connections can be replaced with ID cuff, OD tube, NPT, etc. *
Connection OptionsAdditional OptionsStandard Connections
Options
• Stainless steel *• Leak testing – per request,
fee applicable
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
20
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
• Engineered for areas where ambient noise levels are very low and a high degree of silencing is required.
• Suited for heavy duty stationary, mobile, and marine applications in both Critical and Residential.
• Heavy duty steel construction.• May be installed in any position.• Standard finish is high heat black.• Typical Attenuation: 25 to 33 dBA
ApplicationTypical Attenuation Curve
900C Series Silencer Octave Band
INSER
TIO
N L
OSS
IN
DEC
IBEL
S
(Ref
. 0.
0002
Mic
roba
rs)
900C2-04
900C2-05
900C2-06
900C2-08
900C2-10
900C2-12
900C2-14
900C2-16
900C2-18
900C2-20
4
5
6
8
10
12
14
16
18
20
14
16
20
24
28
36
36
42
48
48
55
61
73
75
99
100
136
139
141
164
52
57
70
71
95
97
133
136
138
161
49
53
66
67
92
93
130
132
134
158
6
7
8
10
12
13
15
17
18
20
22
23
29
43
39
62
60
61
30
34
6
7
10
12
13
15
17
18
8
20
66
92
150
195
340
586
890
1,070
1,240
1,610
11
12
14
16
18
22
22
25
28
28
900C2-22
900C2-24
22
24
54
60
164
166
161
163
159
161
22
24
33
71
22
24
1,860
2,455
31
34
CENTER FREQUENCY, Hz
900C Dimensions (inches)
Cylindrical Series
Critical Grade 900C
125/150# ANSI Pattern flanged inlet and outlet. Side inlet, end outlet.Flanged connections can be replaced with ID cuff, OD tube, NPT, etc. *
Connection OptionsAdditional OptionsStandard Connections
Options
Part Number A B WTC
OAL 1D
OAL 2E
OAL 3F
minF
max H G min
• Stainless steel *• Leak testing – per request,
fee applicable
Style 1 Style 2 Style 3
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
21
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
Typical Attenuation Curve 900H Series Silencer Octave Band
INSER
TIO
N L
OSS
IN
DEC
IBEL
S
(Ref
. 0.
0002
Mic
roba
rs)
CENTER FREQUENCY, Hz
• Engineered to provide a premium level of performance where ambient noise levels are very low and optimal attenuation is mandatory.
• Suited for heavy stationary, marine and mobile power applications where noise attenuation is critical.
• May be installed in any position.• Heavy-duty steel construction.• Standard finish is high heat black.• Internal fiberglass acoustical/
thermal insulation.• Typical Attenuation: 23 to 40 dBA
Application
900H2-05
900H2-06
900H2-08
900H2-10
900H2-12
900H2-14
900H2-16
900H2-18
900H2-20
900H2-22
5
6
8
10
12
14
16
18
20
22
18
20
26
30
36
42
42
48
54
60
62
75
76
100
102
138
140
142
165
166
58
71
72
96
99
135
137
139
162
163
54
67
68
93
95
132
133
135
159
161
23
30
42
40
61
60
59
72
30
71
10
10
12
14
16
16
20
19
10
24
178
220
365
585
920
1,275
1,810
2,115
3,120
3,660
13
14
17
19
22
25
25
29
32
34
900H Dimensions (inches)
900H2-04 4 16 55 52 49 21 8 15012
900H2-24 24 62 167 164 162 70 26 3,78035
10
10
12
14
16
16
20
19
10
24
8
26
Cylindrical Series
Hospital Grade 900H
125/150# ANSI Pattern flanged inlet and outlet. Side inlet, end outlet.Flanged connections can be replaced with ID cuff, OD tube, NPT, etc. *
Connection OptionsAdditional OptionsStandard Connections
Options
Part Number A B WTC
OAL 1D
OAL 2E
OAL 3F
minF
max H G min
• Stainless steel *• Leak testing – per request,
fee applicable
Style 1 Style 2 Style 3
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
22
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D90SA - Spark Arrestor
Cylindrical Series
• Sound Attenuation: Residential Grade (18-25 dBA) Critical Grade (23-30 dBA) Hospital Grade (28-35 dBA)• Construction: Standard all welded heavy-duty carbon steel, ANSI Flange inlet/outlet.• Standard finish is high heat black.• Stainless steel and custom design available upon request.
Application
A spark arresting cylindrical silencer for use on exhaust of internal combustion engines where fire hazards exist. Designed to utilized centrifugal force to separates solids from the exhaust gas stream and deposited in easily accessible cleanout.
To place an order, please contact [email protected] or 402.322.7022
Standard specifications coming soon.
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
23
Special items are not refundable. All catalog items are standard sizing. Call factory for pricing on non-standard items.All weights are approximate and in pounds. Contents subject to change without notice. Minimum order amount $50.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D68 Explosion Relief Cover Kits
68-19.5-KIT 19.5
Part Number
68-120-KIT
NS
12
AOD
COD
BBHC
68-150-KIT 154" through 8"
Recommended for Silencer
Nominal Sizes
10" through 16"18" through 40"
12 13.75 15.75 6 6
E OAL without
Springs
D Number of
Springs
Common ApplicationsTo protect atmospheric vessels such as exhaust silencers from damage due to sudden pressure rises. (Backfires, etc.)
Opening PressureApproximately 5 PSIG.
NOTE: Only kits installed at the factory are covered under warranty.
15 17 18.75 12 619.375 21.25 23 16 6
Explosion Relief Cover Kit
Kit ContentsCover: Carbon steel plate.Flange: Carbon steel plate with equally spaced holes.Springs: Carbon steel compression springs, zinc plated.
NOTE: Springs are compressed to 3.5" length. Heat will affect spring rate.Fasteners: Carbon steel, heavy hex, zinc plated, 1/2" x 6" long.
Includes hex nut, hex jam nut and washer.Gasket: Full face graphite.
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
Any procedures presented in this guide are suggestions only, and it is the responsibility of the owner/operator to ensure that the installation is done only by trained, qualified individuals, and performed according to all applicable codes including, but not limited to, local codes for your municipality, city, county and state; this includes all electrical and mechanical work. All workers must be trained in the proper safety procedures and appropriate PPE and attire must be worn at all times.
It is recommended that the user ensure the entire exhaust system has been received undamaged, is properly designed, and laid out before installing parts. Ensure that the necessary equipment to install the unit are available before beginning. (Support brackets, gaskets, nuts and bolts, outlet elbows, expansion joints, etc…),
The unit is designed to support its own weight and not designed to serve as a support for any piping or additional loads on the inlet or outlet. Ensure the unit is mounted evenly and securely and must be mounted on structural supports. For the final installation, do not support the unit by the flanges.
PRE-INSTALLATION• Prior to unpacking, check all components for shipping damage.• Verify the correct parts are received by comparing the nameplate with the packing list.• Locate nameplate and note direction (if applicable).• Keep shipping materials intact to protect the unit until installation is complete.• Verify that the silencer and recommended gaskets are of proper size for the mating surface
openings and ensure that all mating surfaces are clean and free of foreign material before installation.
• Observe all OSHA mandated regulations for the safe rigging of exhaust equipment. • When cleaning the surfaces, do not use abrasive materials such as steel wool or wire brushes.
Use only isopropyl alcohol and clean with soft rags. (Do not use chloride or halide-based cleaners.)
• Exhaust system components inside the enclosure may need to be covered with suitable insulation to protect personnel and reduce room temperature. Use only chloride and halide free insulation. (Removable Thermal Insulation Covers, aka Wrap, available from inExhaust™)
• Be sure to orient the unit in the proper manner for the indicated flow direction.• If supplied, use all lifting lugs when hoisting the silencer into place, use all mounting feet when
securing the silencer into its operating position. Ensure the unit is mounted evenly across the supports.
• To minimize turbulence and back-pressure, it is recommended that at least 5 tube diameters of straight pipe upstream of the silencer and 2.5 diameters downstream of the silencer be maintained.
INSTALLATION √ Align the unit with the engine and/or piping connections. Pre-loading flange connections due to
misalignment will result in premature failure and will void the warranty.
Flanged Connections:1. Flange faces must be parallel with each other and all mating surfaces must also be parallel. 2. Place the flange of the connector (floating flange, if applicable) over the exhaust outlet of the
engine, with the gasket between the two facing surfaces and bolt holes properly mated, so that the axial lines of the connector and mating orifice are concentrically aligned.
Silencer Installation Guide
Read Through the Entire Manual Before Proceeding with Installation
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected] 25
3. Secure the flange over the mating face of the outlet using the appropriate grade bolts and nuts or an appropriate Nut-Bolt-Gasket (NBG) kit, to aid in maintaining joint tightness over time. Higher grade fasteners may loosen as the system settles, causing failure. Do not use spring lock washers, as operating temperatures and pressures will cause them to degrade or disintegrate. Apply high temperature anti-seize to bolts – use Loctite® 34517 or equivalent.
4. Secure the opposite flange of the connector to the mating face of the receiving system, with the gasket between the two facing surfaces and bolt holes properly mated. Use the same grade of fasteners as previously described, ensuring that the axial lines of the engine outlet, connector, and mating orifice remain concentrically aligned. Caution:
a) The installation must be pre-aligned so that bolts for all mating surfaces can drop into place with no force, offsetting, bending, twisting or other form of distortion.
b) Pre-loading flange connections due to misalignment will result in premature failure and will void the warranty.
Cuffed Connections:1. Ensure the clamp is loosely attached to either the cuff or the exhaust piping prior to fitting the
exhaust piping to the cuff. 2. Insert the exhaust piping securely into the cuffed portion of the connection, ensuring that the
exhaust piping is uniformly bottomed out. 3. Position the clamp towards the edge of the cuff, allowing a minimum of 0.5” from the edge of
the clamp to the edge of the pipe. 4. Torque the clamp bolts until tight. Re-check tightness prior to and after initial engine start and
system commissioning. √ Install a suitable expansion joint (bellows or wye) between the silencer and the engine to reduce
thermal growth damage to the unit and reduce some vibration transfer that could cause damage. √ Make sure all ports, openings, and connections are clear from obstruction. √ Ensure runs of exhaust piping are sloped away from the engine to prevent condensation and
outside moisture from entering the engine. Drain traps should be installed at the lowest point in the line.
POST INSTALLATION• Review and ensure that all components of your exhaust system are properly installed and
ready for operation.• If there is any indication of leaks or damage, cease operation immediately and conduct a
broader inspection to determine the cause and resolve.• After the initial engine run and cool down, re-check all bolts for tightness and torque as
required.• Exhaust back-pressure must not exceed the allowable back-pressure specified by the engine
manufacturer. Excessive exhaust back-pressure reduces engine power and engine life and may lead to high exhaust temperatures and smoke. Engine exhaust back-pressure should be estimated before the layout of the exhaust system is finalized and is recommended to be measured at the exhaust outlet under full–load operation, as needed.
• Verify that the type and amount of movement generated by the system are identical with movements the expansion joint is designed for.
MAINTENANCEIt is recommended that maintenance is performed monthly, or every 10 hours of operation, (whichever comes first).
Continued
Silencer Installation Guide
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
26
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
Maintenance for a typical exhaust system installation will consist of physical and visual examination of the exhaust system for any sign of gas leakage, cracks, significant areas of damage or corrosion. Re-tighten any loose bolts if necessary.
Note: If there is any indication of leaks or damage, cease operation immediately and conduct a broader inspection to determine the cause and resolve.
Continued
Silencer Installation Guide
Thank you for choosing inExhaust as your exhaust system components solution!For any questions, please contact us at [email protected]
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
27
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E DTerms and Conditions
• Please review the quotation/order when received to ensure accuracy on agreed price and lead time
• Multiple parts and/or large quantity parts may extend lead times• Custom parts that are quoted and then ordered are non-refundable, non-restockable, and non-
returnable• Freight is Ex Works (EXW) Factory• Minimum order $50
Delivery from inExhaust™, hereafter referred to as Manufacturer, is defined as the date/time the equipment leaves the Manufacturer’s shipping dock.
Manufacturer provides two options for shipping terms. By default, the Manufacturer shall choose Option 1 unless directed by the Purchaser or otherwise specified.
OPTION 1Shipment is Ex Works (EXW) Factory, Freight Prepaid & Add
a) The Manufacturer pays and invoices Purchaser for freight chargesb) The Purchaser assumes the title and control of the equipment at the moment the carrier
signs the bill of ladingc) The Manufacturer reserves the right to select the freight carrierd) The Purchaser is responsible for filing and settling claims for loss or damage of equipment
OPTION 2Shipment is Ex Works (EXW) Origin Freight Collect.
a) The Purchaser pays and bears the freight chargesb) The Purchaser assumes title and control of the equipment at the moment the carrier signs
the bill of ladingc) The Purchaser is responsible for filing and settling claims for loss or damage of equipment
• All drawings and documents furnished to Purchaser by the Manufacturer is the work product of the Manufacturer who shall be deemed the author and shall retain all common law, statutory law and other rights of ownership, including copyrights. Purchaser may make and retain copies for informational purposes only.
• The Manufacturer will endeavor to make shipment of orders as scheduled whenever possible. However, all shipment dates are approximate only, and the Manufacturer reserves the right to adjust shipment schedules at its sole discretion.
UNDER NO CIRCUMSTANCES WILL THE MANUFACTURER BE RESPONSIBLE OR INCUR ANY LIABILITY FOR COSTS OR DAMAGES OF ANY NATURE (WHETHER GENERAL, CONSEQUENTIAL, AS A PENALTY OR LIQUIDATED DAMAGES, OR OTHERWISE) ARISING OUT OF OR OWING TO ANY DELAYS IN DELIVERY.
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
28
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E DTerms and Conditions
Continued
When the equipment is ready for shipment and shipment is delayed or postponed through any causes, or at Purchaser’s request, the Purchaser shall:
• Pay the Manufacturer’s invoice for the equipment as per payment terms, • Arrange for storage of the equipment covered by this agreement other than at the
Manufacturer’s facility, unless by separate written agreement the Manufacturer shall agree to store the equipment and the charges for such storage.
• The Manufacturer warrants to the Purchaser that it will repair or replace at Manufacturer’s option, any equipment, or parts of equipment, which, in the Manufacturer’s judgment is defective in material or workmanship for a period of one (1) year after the date of shipment from the Manufacturer’s facility.
• Equipment, accessories and other parts and components not manufactured by the Manufacturer are warranted only to the extent of and by the original manufacturer’s warranty to the Manufacturer, and in no event shall such other manufacturer’s warranty create any more extensive obligations of the Manufacturer to the Purchaser than the Manufacturer’s warranty covering equipment manufactured by the Manufacturer.
NOTE: Upon receipt of shipment, customer is responsible for inspection of items. Most carriers require immediate notification of damage. This means inspection must be made at time of delivery and any damage must be noted on the carrier’s paperwork. A signature without mention of damage is considered “clear” by the carrier and will not be covered under insurance.
Any missing or damaged goods must be reported in writing to the vendor within 30 days from date of receipt. Lack of notification within 30 days will be considered as complete and satisfactory delivery of goods.
Thank you for choosing inExhaust as your exhaust system components solution!For any questions, please contact us at [email protected]
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected] 29
inExhaust™, hereafter referred to as Manufacturer, warrants to the Purchaser that it will repair or replace at the Manufacturer’s option, any equipment, or parts of equipment, which, in the Manufacturer’s judgment is defective in material or workmanship for a period of one (1) year after the date of shipment from the Manufacturer’s facility.
Defects or failure due to improper or careless storage, handling, installation, non-manufacturing welding/hot-work, application, testing/cycling without correct amount of time to allow system to warm up stabilize, evaporate combustion moisture and improper moisture draining either from condensation, emission or environmental introduction of moisture inside exhaust components exclude Manufacturer from upholding warranty.
Other exclusions include undisclosed/unspecified/alternate application, or corrosion accelerated due to smog, salinity, or other corrosive environments or combustion emissions (i.e. alternative fuel sources), poor or inadequate maintenance, or acts of God.
Damage from backfires, or from other malfunctioning engine conditions is not covered. Damage from excessive exhaust temperature beyond information provided at time of quote is not covered. For exhaust temperatures near 1000F or higher purchaser must disclose intention to externally insulate exhaust products especially with carbon steel as material of construction. Damage from other chemical or flammable substances encountering exhaust products is not covered.
Equipment, accessories and other parts and components sold by but not manufactured by the Manufacturer are warranted only to the extent of and by the original manufacturer’s warranty to the Manufacturer, and in no event shall such other manufacturer’s warranty create any more extensive obligations of the Manufacturer to the Purchaser other than the Manufacturer’s warranty covering equipment manufactured by the Manufacturer. Manufacturer does not warrant any labor for removal, re-installation or maintenance of components.
SHIPPING
Manufacturer will endeavor to make shipment of orders as scheduled. However, all shipment dates are approximate only, and the Manufacturer reserves the right to adjust shipment schedules at its sole discretion. No liability is accepted for return transportation charges, following the repair or replacement, or for re-installation cost. No other expressed or implied warranties exist in the absence of special written agreement between the consumer and Manufacturer.
Under no circumstances will the Manufacturer be responsible or incur any liability for costs or damages of any nature (whether general, consequential, as a penalty or liquidated damages, or otherwise) arising out of or owing to any delays in delivery.
THE MANUFACTURER SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, DELAY OR CONSEQUENTIAL DAMAGES, OR FOR LOSS, DAMAGE OR EXPENSE, DIRECTLY OR INDIRECTLY ARISING FROM THE USE OF THE EQUIPMENT, SPARE OR REPLACEMENT PARTS, OR FROM ANY OTHER CAUSE WHETHER BASED ON WARRANTY (EXPRESSED OR IMPLIED) OR TORT OR CONTRACT AND THE MANUFACTURER’S TOTAL LIABILITY SHALL NOT EXCEED THE PURCHASE PRICE, regardless of any advices or recommendations that may have been rendered concerning the purchase, installation or use of the equipment.
Standard Product Warranty
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected]
©2019 Innovative Exhaust Solutions, Inc. Lincoln, NE USAUnauthorized reproduction in full or part is strictly prohibited. | Rev030619-A
30
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E DStandard Product Warranty
Continued
GOVERNING LAW
This agreement is made and entered in the State of Nebraska, County of Lancaster, and shall be construed and interpreted in accordance with the laws of the State of Nebraska (including the provisions of the Nebraska Uniform Commercial Code), without regard to its conflict of law’s provisions. Regarding any disputes which arise hereunder, Purchaser hereby submits to the exclusive jurisdiction and venue of the District Court of Lancaster County, Nebraska or the United States District Court for the District of Nebraska. Purchaser also agrees not to bring any action or proceeding arising out of this Agreement in any other court or jurisdiction. Purchaser waives any defense of inconvenient forum to the maintenance of any action or proceeding so brought and waives any bond, surety, or other security that might be required of the Manufacturer.
RETURN POLICY
Written notice must be given to Manufacturer immediately upon discovery of any defect. All returned products must be pre-approved in writing by Manufacturer and all return shipments must be prepaid by the Purchaser Ex Works (EXW) and identified with Return Material Authorization (RMA) number issued by Manufacturer. A 25% restocking fee will be made on goods returned within 6 months of shipment.
All defective products must be returned to receive a no-cost replacement. If defective components are not returned, Purchaser must pay for replacement. This can only be subjugated by written approval from Manufacturer.
NOTE: Upon receipt of shipment, customer is responsible for inspection of items. Most carriers require immediate notification of damage. This means inspection must be made at time of delivery and any damage must be noted on the carrier’s paperwork. A signature without mention of damage is considered “clear” by the carrier and will not be covered under insurance.
Any missing or damaged goods must be reported in writing to the vendor within 30 days from date of receipt. Lack of notification within 30 days will be considered as complete and satisfactory delivery of goods.
See Terms & Conditions for details.
inExhaust™ reserves the right to change the contents without notice. We do make every effort to have the most recent documents on our website. For latest revision please contact inExhaust™.
Thank you for choosing inExhaust as your exhaust system components solution!For any questions, please contact us at [email protected]
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
www.inExhaust.com | Phone 402.322.7022 | Fax 402.322.7032 | [email protected] 31
We are proud to announce that our Lincoln, Nebraska facility achieved ISO 2001:2015 certification on October 23, 2018!
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
Your Exhaust System Components Solution
INNOVATIVE EXHAUST SOLUTIONS, INC.
TM
ISO 9001:2015 C E R T I F I E D
inExhaust.com | 402.322.7022 | [email protected]
Silencer Catalog
©2019 Innovative Exhaust Solutions, Inc.