Islands Collection by Knoll...628 Dark Mahogany 639 Light Cherry 641 Black Oak 506 Maple 509 Cherry...

Price ListMarch 2020

Islands Collection by Knoll®

Table of Contents

Introduction Knoll and Sustainable Design 2Materials and Finish Options 3

Straight Leg Tables Straight Leg, Occasional Heights 5Straight Leg - Desk Height 16

X-Base Tables X-Base Tables - Occasional Heights 28X-Base Tables - Desk Height 35X-Base Tables - Standing Height 38X-Base Tables - Conference 43

MX Base Tables MX Base Tables - Occasional Heights 58MX Base Tables - Desk Height 66MX Base Tables - Standing Height 70MX Base Tables - Conference 76

Accessories Electrical Units - Drop-in 90Electrical Units - Power Square 93Electrical Units - Clamp-On 96Electrical Units - Offset Clamp-On 98Electrical Units - for Chicago 100Electrical Units - Undermount 104Electrical Units - Wide Channel Desktop Outlets 105Wire Management 107

Alpha-Numeric Index 110

Selling Policy 115

General Ordering Information 118


PLILT01211

Copyright � 2020 Knoll, Inc.All rights reserved.All prices effective 03/15/2020.

Knoll and Sustainable Design

Each year Knoll sets key initiatives in the journey to sustainability. Focused on our impact to people and planet, Knoll reports materialhealth product attributes and sets operational targets to reduce greenhouse gas emissions, waste generation and water use (in our NorthAmerican facilities.)

Material transparency is a core Knoll sustainable design value, enabling us to optimize the design and performance of our products.Our material health program utilizes independent third-party certifications that provide an impartial and trustworthy foundation forindustry-wide transparency. Certification by respected third parties ensures that all manufacturers are held to the same high standards.Knoll certifications include: Forest Stewardship Council (FSC�), Intertek’s Clean Air Program, Business and Institutional FurnitureManufacturer’s Association (BIFMA) LEVEL� certification, International Living Future Institute’s (ILFI) Declare labelling and CertifiedEnvironmental Product Declarations. In addition, Knoll is aligned with the U.S. Green Building Council and can help organizationsachieve credits for Leadership in Energy and Environmental Design (LEED�), WELL and the Living Building Challenge (LBC) buildingcertifications.

In our manufacturing operations, we focus on efficiency and impact. Knoll Office and Knoll Europe manufacturing locations are ISO14001:2015 certified. Knoll sets objectives and targets to reduce energy, water and waste. These initiatives are part of a long-termstrategy to further reduce energy consumption and lower our carbon footprint.

We also believe in helping our customers find viable options when decommissioning furniture or other related assets. ANEW’s FullCircle Program, in partnership with Knoll, allows customers to leverage buy-back and re-sale programs as well as explore options forrepurposing or recycling that mitigate landfill impact through energy-from-waste conversion.

For more information about Knoll and sustainable design, visit www.knoll.com/environment.

2

Materials and Finish Options

For specific product applications for eachfinish refer to the finish matrix on the followingpages.

KNOLL CORE LAMINATESSolid Colors111 Jet Black* **114 Folkstone Grey* **115 Medium Grey* **117 Soft Grey* **118 Bright White* **119 Pumice* **128 Fog* **

Patterned121 Micro Grey122 Brushed Sand123 Brushed Grey129 Micro Sand

Wood Grain124 Medium Cherry* **125 Natural Maple* **126 Natural Cherry* **127 Walnut* **139 Light Ash* **140 Warm Ash* **141 Whitened Ash*142 Grey Ash* **143 Classic Oak* **144 Graphite Pear* **145 Zebra*147 Silverwood**148 Smokewood**149 Barnwood**

*Matching edgeband available**Melamine worksurface finish

POLISHED FINISHPD ChromeAL Aluminum

KNOLL CORE PAINTS111T Jet Black112T Brown113T Dark Grey114T Folkstone Grey115T Medium Grey116T Sandstone117T Soft Grey118T Bright White611T Beige Mist Metallic612T Medium Metallic Grey613T Silver

EDGE OPTIONS FOR LAMINATEWORKSURFACESSPLY Ply Edge Synthetic (L pricing)

GRAIN DIRECTIONHorizontal (H)Vertical (V):

Grain direction applies to wood grain laminates,techwoods and natural veneers.

IslandsCollectionbyKnoll

3

Materials and Finish Options

Wood FinishesCodes begin with a three digit numeric sequence, followed by a letter suffix. Each letter suffix (A-F) represents a different combination of pore fill options andgloss levels.

Code V1 TECHWOOD

638 Blond Maple628 Dark Mahogany639 Light Cherry641 Black Oak506 Maple509 Cherry512 Medium Walnut513 Medium Teak514 Espresso637 Natural644 Light Walnut645 Dove Grey

Code V2 PREMIUM TECHWOOD

647 White Pine640 Ebony642 Grigio

V2 Natural Veneer020 Natural Oak038 Rustic Walnut017 Light Walnut002 Bronze Cherry006 Maple021 Peacock Green Walnut022 Old English Walnut037 Birch

Code V3 PREMIUM VENEER

039 Pippy Oak044 Figured Sycamore

Gloss Level Fill LevelA Low Gloss Closed PoreB Medium Gloss Closed PoreC High Gloss Closed Pore

D Low Gloss Open PoreE Medium Gloss Open PoreF High Gloss Open Pore

Edge Options for VeneersSYN Complementary SyntheticSPLY Synthetic Ply Edge *

* Ply Edge available on Birch (037) worksurfaces.

Note:For more detailed information on Veneer finishes, please refer to the Wood Finish Matrix on the Knoll.com site.

IslandsCollectionbyKnoll

4

Straight Leg, Occasional Heights12�, 15� and 18� HighRound Tables

description d w h pattern no. L V1 V2 V3

Round Table12� High

30� 30� 12� ILTRD(S/B4/T4)SG301( )( )( )( )( )( )( ) $1,171. $1,369. $1,455. $1,676.36� 36� 12� ILTRD(S/B4/T4)SG361( )( )( )( )( )( )( ) 1,206. 1,404. 1,490. 1,711.42� 42� 12� ILTRD(S/B4/T4)SG421( )( )( )( )( )( )( ) 1,241. 1,439. 1,525. 1,746.48� 48� 12� ILTRD(S/B4/T4)SG481( )( )( )( )( )( )( ) 1,276. 1,474. 1,560. 1,781.54� 54� 12� ILTRD(S/B4/T4)SG541( )( )( )( )( )( )( ) 1,313. 1,525. 1,628. 1,869.60� 60� 12� ILTRD(S/B4/T4)SG601( )( )( )( )( )( )( ) 1,359. 1,587. 1,709. 1,974.

*Available with Glides only.


30� 30� 15� ILTRD(S/B4/T4)SG302( )( )( )( )( )( )( ) 1,196. 1,394. 1,480. 1,701.36� 36� 15� ILTRD(S/B4/T4)SG362( )( )( )( )( )( )( ) 1,231. 1,429. 1,515. 1,736.42� 42� 15� ILTRD(S/B4/T4)SG422( )( )( )( )( )( )( ) 1,266. 1,464. 1,550. 1,771.48� 48� 15� ILTRD(S/B4/T4)SG482( )( )( )( )( )( )( ) 1,301. 1,499. 1,585. 1,806.54� 54� 15� ILTRD(S/B4/T4)SG542( )( )( )( )( )( )( ) 1,338. 1,550. 1,653. 1,894.60� 60� 15� ILTRD(S/B4/T4)SG602( )( )( )( )( )( )( ) 1,384. 1,612. 1,734. 1,999.



30� 30� 18� ILTRD(S/B4/T4)(SG/SC)303( )( )( )( )( )( )( ) 1,196. 1,394. 1,480. 1,701.36� 36� 18� ILTRD(S/B4/T4)(SG/SC)363( )( )( )( )( )( )( ) 1,231. 1,429. 1,515. 1,736.42� 42� 18� ILTRD(S/B4/T4)(SG/SC)423( )( )( )( )( )( )( ) 1,266. 1,464. 1,550. 1,771.48� 48� 18� ILTRD(S/B4/T4)(SG/SC)483( )( )( )( )( )( )( ) 1,301. 1,499. 1,585. 1,806.54� 54� 18� ILTRD(S/B4/T4)(SG/SC)543( )( )( )( )( )( )( ) 1,338. 1,550. 1,653. 1,894.60� 60� 18� ILTRD(S/B4/T4)(SG/SC)603( )( )( )( )( )( )( ) 1,384. 1,612. 1,734. 1,999.

*Available with Glides and Casters.

Order Code

Example: ILTRDSSG301IL Islands Collection by

Knoll�T TableRD RoundS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish

Specification Information

To order please specify patternnumber including:1. Grommet option:

N = None (no grommet)D4 = Narrow slot 4�W (30�, 36�,42�)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)

2. Grommet finish:N = Not applicableD4/D8/D12 = B=Black,W=White (textured)S = 111, 114, 115, 117

3. Worksurface finish:L, V1, V2, V3

4. Edge finish:Complementary synthetic

5. Top plate finish:Painted/texturedPolished aluminum

6. Leg finishPainted/texturedPolished aluminum

All Worksurfaces are 1 1/4� thick.

Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides

*Foot:SG = GlideSC = Caster

Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H

Application Notes

The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8 & D12: $80Polished finish: $125 (Top plate,leg or both)

All electrical accessories arespecified separately.

Refer to Accessories section forelectrical component pricing.


5

Straight Leg, Occasional Heights12�, 15� and 18� HighSquare Table


Square Table12� High

30� 30� 12� ILTSQ(S/B4/T4)SG301( )( )( )( )( )( ) $1,027. $1,150. $1,206. $1,331.36� 36� 12� ILTSQ(S/B4/T4)SG361( )( )( )( )( )( ) 1,062. 1,185. 1,241. 1,366.42� 42� 12� ILTSQ(S/B4/T4)SG421( )( )( )( )( )( ) 1,094. 1,229. 1,299. 1,441.48� 48� 12� ILTSQ(S/B4/T4)SG481( )( )( )( )( )( ) 1,127. 1,301. 1,386. 1,554.54� 54� 12� ILTSQ(S/B4/T4)SG541( )( )( )( )( )( ) 1,168. 1,356. 1,459. 1,649.60� 60� 12� ILTSQ(S/B4/T4)SG601( )( )( )( )( )( ) 1,213. 1,418. 1,540. 1,755.



30� 30� 15� ILTSQ(S/B4/T4)SG302( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 15� ILTSQ(S/B4/T4)SG362( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,341.42� 42� 15� ILTSQ(S/B4/T4)SG422( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 15� ILTSQ(S/B4/T4)SG482( )( )( )( )( )( ) 1,152. 1,304. 1,390. 1,552.54� 54� 15� ILTSQ(S/B4/T4)SG542( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 15� ILTSQ(S/B4/T4)SG602( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.



30� 30� 18� ILTSQ(S/B4/T4)(SG/SC)303( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 18� ILTSQ(S/B4/T4)(SG/SC)363( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,431.42� 42� 18� ILTSQ(S/B4/T4)(SG/SC)423( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 18� ILTSQ(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,152. 1,304. 1,390. 1,552.54� 54� 18� ILTSQ(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 18� ILTSQ(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.


Order Code


Knoll�T TableSQ SquareS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish













Application Notes





6

Straight Leg, Occasional Heights12�, 15� and 18� HighSquare Table with Curved Corners


Square Table, 12� HighCurved corners

30� 30� 12� ILTSC(S/B4/T4)SG301( )( )( )( )( )( ) $1,027. $1,150. $1,206. $1,331.36� 36� 12� ILTSC(S/B4/T4)SG361( )( )( )( )( )( ) 1,062. 1,185. 1,241. 1,366.42� 42� 12� ILTSC(S/B4/T4)SG421( )( )( )( )( )( ) 1,094. 1,229. 1,299. 1,441.48� 48� 12� ILTSC(S/B4/T4)SG481( )( )( )( )( )( ) 1,127. 1,301. 1,386. 1,554.54� 54� 12� ILTSC(S/B4/T4)SG541( )( )( )( )( )( ) 1,168. 1,356. 1,459. 1,649.60� 60� 12� ILTSC(S/B4/T4)SG601( )( )( )( )( )( ) 1,213. 1,418. 1,540. 1,755.


Square Table, 15� HighCurved corners

30� 30� 15� ILTSC(S/B4/T4)SG302( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 15� ILTSC(S/B4/T4)SG362( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,431.42� 42� 15� ILTSC(S/B4/T4)SG422( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 15� ILTSC(S/B4/T4)SG482( )( )( )( )( )( ) 1,152. 1,304. 1,390. 1,552.54� 54� 15� ILTSC(S/B4/T4)SG542( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 15� ILTSC(S/B4/T4)SG602( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.


Square Table, 18� HighCurved Corners

30� 30� 18� ILTSC(S/B4/T4)(SG/SC)303( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 18� ILTSC(S/B4/T4)(SG/SC)363( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,431.42� 42� 18� ILTSC(S/B4/T4)(SG/SC)423( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 18� ILTSC(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,152. 1,304. 1,390. 1,552.54� 54� 18� ILTSC(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 18� ILTSC(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.


Order Code

Example: ILTSCSSG301IL Islands Collection by

Knoll�T TableSC Square with Curved

CornersS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish









All Worksurfaces are 1 1/4� thick .




Application Notes





7

Straight Leg, Occasional Heights12�, 15� and 18� HighSoft Square Tables


Soft square Table12� High

30� 30� 12� ILTSS(S/B4/T4)SG301( )( )( )( )( )( ) $1,027. $1,150. $1,206. $1,331.36� 36� 12� ILTSS(S/B4/T4)SG361( )( )( )( )( )( ) 1,062. 1,185. 1,241. 1,366.42� 42� 12� ILTSS(S/B4/T4)SG421( )( )( )( )( )( ) 1,094. 1,229. 1,299. 1,441.48� 48� 12� ILTSS(S/B4/T4)SG481( )( )( )( )( )( ) 1,127. 1,301. 1,386. 1,554.54� 54� 12� ILTSS(S/B4/T4)SG541( )( )( )( )( )( ) 1,168. 1,356. 1,459. 1,649.60� 60� 12� ILTSS(S/B4/T4)SG601( )( )( )( )( )( ) 1,213. 1,418. 1,540. 1,755.



30� 30� 15� ILTSS(S/B4/T4)SG302( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 15� ILTSS(S/B4/T4)SG362( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,431.42� 42� 15� ILTSS(S/B4/T4)SG422( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 15� ILTSS(S/B4/T4)SG482( )( )( )( )( )( ) 1,152. 1,304. 1,390. 1,552.54� 54� 15� ILTSS(S/B4/T4)SG542( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 15� ILTSS(S/B4/T4)SG602( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.



30� 30� 18� ILTSS(S/B4/T4)(SG/SC)303( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 18� ILTSS(S/B4/T4)(SG/SC)363( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,431.42� 42� 18� ILTSS(S/B4/T4)(SG/SC)423( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 18� ILTSS(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,152. 1,254. 1,324. 1,466.54� 54� 18� ILTSS(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 18� ILTSS(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.


Example: ILTSSSSG301IL Islands Collection by

Knoll�T TableSS Soft SquareS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish

Specification Notes












Application Notes





8

Straight Leg, Occasional Heights12�, 15� and 18� HighSoft Pentagon Tables


Soft pentagon Tables12� High

36� 36� 12� ILTPT(S/B4/T4)SG361( )( )( )( )( )( ) $1,412. $1,607. $1,692. $1,924.42� 42� 12� ILTPT(S/B4/T4)SG421( )( )( )( )( )( ) 1,447. 1,642. 1,727. 1,959.48� 48� 12� ILTPT(S/B4/T4)SG481( )( )( )( )( )( ) 1,482. 1,677. 1,762. 1,994.54� 54� 12� ILTPT(S/B4/T4)SG541( )( )( )( )( )( ) 1,517. 1,712. 1,797. 2,029.60� 60� 12� ILTPT(S/B4/T4)SG601( )( )( )( )( )( ) 1,558. 1,767. 1,870. 2,124.



36� 36� 15� ILTPT(S/B4/T4)SG362( )( )( )( )( )( ) 1,497. 1,692. 1,777. 2,009.42� 42� 15� ILTPT(S/B4/T4)SG422( )( )( )( )( )( ) 1,532. 1,727. 1,812. 2,044.48� 48� 15� ILTPT(S/B4/T4)SG482( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 15� ILTPT(S/B4/T4)SG542( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 15� ILTPT(S/B4/T4)SG602( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.



36� 36� 18� ILTPT(S/B4/T4)(SG/SC)363( )( )( )( )( )( ) 1,497. 1,692. 1,777. 2,009.42� 42� 18� ILTPT(S/B4/T4)(SG/SC)423( )( )( )( )( )( ) 1,532. 1,727. 1,812. 2,044.48� 48� 18� ILTPT(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 18� ILTPT(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 18� ILTPT(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.


Order Code

Example: ILTPTSSG301IL Islands Collection by

Knoll�T TablePT Soft PentagonS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)










Application Notes





9

Straight Leg, Occasional Heights12�, 15� and 18� HighSoft Pentagon Tables, Type 2


Soft Pentagon TablesType 2, 12� High

48� 48� 12� ILTP2(S/B4/T4)SG481( )( )( )( )( )( ) $1,517. $1,712. $1,797. $2,029.54� 54� 12� ILTP2(S/B4/T4)SG541( )( )( )( )( )( ) 1,558. 1,767. 1,870. 2,124.60� 60� 12� ILTP2(S/B4/T4)SG601( )( )( )( )( )( ) 1,603. 1,829. 1,951. 2,229.



48� 48� 15� ILTP2(S/B4/T4)SG482( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 15� ILTP2(S/B4/T4)SG542( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 15� ILTP2(S/B4/T4)SG602( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.



48� 48� 18� ILTP2(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 18� ILTP2(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 18� ILTP2(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.


Order Code

Example: ILTP2SSG301IL Islands Collection by

Knoll�T TableP2 Soft Pentagon Type 2S Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)










Application Notes

The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D8 & D12: $80Polished finish: $175 (Top plate,leg or both)




10

Straight Leg, Occasional Heights12�, 15� and 18� HighOrganic Pentagon Tables, Type A


Organic Pentagon TableType A, 12� High

48� 48� 12� ILTOPA(S/B4/T4)SG481( )( )( )( )( )( ) $1,517. $1,712. $1,797. $2,029.54� 54� 12� ILTOPA(S/B4/T4)SG541( )( )( )( )( )( ) 1,558. 1,767. 1,870. 2,124.60� 60� 12� ILTOPA(S/B4/T4)SG601( )( )( )( )( )( ) 1,603. 1,829. 1,951. 2,229.



48� 48� 15� ILTOPA(S/B4/T4)SG482( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 15� ILTOPA(S/B4/T4)SG542( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 15� ILTOPA(S/B4/T4)SG602( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.



48� 48� 18� ILTOPA(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 18� ILTOPA(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 18� ILTOPA(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.


Order Code

Example: ILTOPASSG301IL Islands Collection by

Knoll�T TableOPA Organic pentagon Type

AS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish

Specification Notes



2. Grommet finish:N = Not applicableD8/D12 = B=Black, W=White(textured)S = 111, 114, 115, 117









Application Notes





11

Straight Leg, Occasional Heights12�, 15� and 18� HighOrganic Pentagon Tables, Type B


Organic Pentagon TableType B, 12� High

48� 48� 12� ILTOPB(S/B4/T4)SG481( )( )( )( )( )( ) $1,517. $1,712. $1,797. $2,029.54� 54� 12� ILTOPB(S/B4/T4)SG541( )( )( )( )( )( ) 1,558. 1,767. 1,870. 2,124.60� 60� 12� ILTOPB(S/B4/T4)SG601( )( )( )( )( )( ) 1,603. 1,829. 1,951. 2,229.



48� 48� 15� ILTOPB(S/B4/T4)SG482( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 15� ILTOPB(S/B4/T4)SG542( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 15� ILTOPB(S/B4/T4)SG602( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.



48� 48� 18� ILTOPB(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 18� ILTOPB(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 18� ILTOPB(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.


Order Code

Example: ILTOPBSSG301IL Islands Collection by

Knoll�T TableOPB Organic Pentagon Type

BS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish













Application Notes





12

Straight Leg, Occasional Heights12�, 15� and 18� HighOrganic Triangle Tables, Left and Right


Organic triangle Table12� High

Left hand shown

36� 44� 12� ILTOT(L/R)(S/B4/T4)SG36441( )( )( )( )( )( ) $1,269. $1,448. $1,512. $1,718.42� 51� 12� ILTOT(L/R)(S/B4/T4)SG42511( )( )( )( )( )( ) 1,306. 1,498. 1,578. 1,804.48� 59� 12� ILTOT(L/R)(S/B4/T4)SG48591( )( )( )( )( )( ) 1,352. 1,560. 1,660. 1,911.54� 66� 12� ILTOT(L/R)(S/B4/T4)SG54661( )( )( )( )( )( ) 1,401. 1,625. 1,747. 2,024.60� 74� 12� ILTOT(L/R)(S/B4/T4)SG60741( )( )( )( )( )( ) 1,459. 1,704. 1,851. 2,154.



Left hand shown

36� 44� 15� ILTOT(L/R)(S/B4/T4)SG36442( )( )( )( )( )( ) 1,294. 1,473. 1,537. 1,743.42� 51� 15� ILTOT(L/R)(S/B4/T4)SG42512( )( )( )( )( )( ) 1,331. 1,523. 1,603. 1,829.48� 59� 15� ILTOT(L/R)(S/B4/T4)SG48592( )( )( )( )( )( ) 1,377. 1,585. 1,685. 1,936.54� 66� 15� ILTOT(L/R)(S/B4/T4)SG54662( )( )( )( )( )( ) 1,426. 1,650. 1,772. 2,049.60� 74� 15� ILTOT(L/R)(S/B4/T4)SG60742( )( )( )( )( )( ) 1,484. 1,729. 1,876. 2,184.



Left hand shown

36� 44� 18� ILTOT(L/R)(S/B4/T4)(SG/SC)36443( )( )( )( )( )( ) 1,294. 1,473. 1,537. 1,743.42� 51� 18� ILTOT(L/R)(S/B4/T4)(SG/SC)42513( )( )( )( )( )( ) 1,331. 1,523. 1,603. 1,829.48� 59� 18� ILTOT(L/R)(S/B4/T4)(SG/SC)48593( )( )( )( )( )( ) 1,377. 1,585. 1,685. 1,936.54� 66� 18� ILTOT(L/R)(S/B4/T4)(SG/SC)54663( )( )( )( )( )( ) 1,426. 1,650. 1,772. 2,049.60� 74� 18� ILTOT(L/R)(S/B4/T4)(SG/SC)60743( )( )( )( )( )( ) 1,484. 1,729. 1,876. 2,184.


Order Code

Example: ILTOTLSSG36441IL Islands Collection by

Knoll�T TableOT Organic TriangleL Left hand, (R=Right)S Edge (S/B4/T4)SG Foot (SG/SC)36 Depth44 Width1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)










Application Notes





13

Straight Leg, Occasional Heights12�, 15� and 18� HighOrganic Elongated Pentagon Tables, Left and Right


Organic elongatd pentagonTable, 12� High

Left hand shown

35� 60� 12� ILTOE(L/R)(S/B4/T4)SG35601( )( )( )( )( )( )( ) $1,303. $1,494. $1,573. $1,797.39� 66� 12� ILTOE(L/R)(S/B4/T4)SG39661( )( )( )( )( )( )( ) 1,335. 1,537. 1,629. 1,870.42� 72� 12� ILTOE(L/R)(S/B4/T4)SG42721( )( )( )( )( )( )( ) 1,365. 1,577. 1,683. 1,940.45� 78� 12� ILTOE(L/R)(S/B4/T4)SG45781( )( )( )( )( )( )( ) 1,397. 1,620. 1,740. 2,015.48� 84� 12� ILTOE(L/R)(S/B4/T4)SG48841( )( )( )( )( )( )( ) 1,432. 1,667. 1,802. 2,095.



Left hand shown

35� 60� 15� ILTOE(L/R)(S/B4/T4)SG35602( )( )( )( )( )( )( ) 1,328. 1,519. 1,598. 1,822.39� 66� 15� ILTOE(L/R)(S/B4/T4)SG39662( )( )( )( )( )( )( ) 1,360. 1,562. 1,654. 1,895.42� 72� 15� ILTOE(L/R)(S/B4/T4)SG42722( )( )( )( )( )( )( ) 1,390. 1,602. 1,708. 1,965.45� 78� 15� ILTOE(L/R)(S/B4/T4)SG45782( )( )( )( )( )( )( ) 1,422. 1,645. 1,765. 2,040.48� 84� 15� ILTOE(L/R)(S/B4/T4)SG48842( )( )( )( )( )( )( ) 1,457. 1,692. 1,827. 2,120.



Left hand shown

35� 60� 18� ILTOE(L/R)(S/B4/T4)(SG/SC)35603( )( )( )( )( )( )( ) 1,328. 1,519. 1,598. 1,822.39� 66� 18� ILTOE(L/R)(S/B4/T4)(SG/SC)39663( )( )( )( )( )( )( ) 1,360. 1,562. 1,654. 1,895.42� 72� 18� ILTOE(L/R)(S/B4/T4)(SG/SC)42723( )( )( )( )( )( )( ) 1,390. 1,602. 1,708. 1,965.45� 78� 18� ILTOE(L/R)(S/B4/T4)(SG/SC)45783( )( )( )( )( )( )( ) 1,422. 1,645. 1,765. 2,040.48� 84� 18� ILTOE(L/R)(S/B4/T4)(SG/SC)48843( )( )( )( )( )( )( ) 1,457. 1,692. 1,827. 2,120.


Order Code

Example: ILTOELSSG35601IL Islands Collection by

Knoll�T TableOE Organic Elongated

PentagonL Left Hand, (R=Right)S Edge (S/B4/T4)SG Foot (SG/SC)35 Depth60 Width1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)All grommets are centered on theworksurfaces.

2. Grommet finish:N = Not applicableD12 = B=Black, W=White(textured)S = 111, 114, 115, 117









Application Notes

The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D12: $80Polished finish: $125 (Top plate,leg or both)




14

Straight Leg, Occasional Heights12�, 15� and 18� HighOrganic Rectangle Table, Left and Right


Organic rectangle Table12� High

Left hand shown

33� 60� 12� ILTOR(L/R)(S/B4/T4)SG33601( )( )( )( )( )( )( ) $1,295. $1,483. $1,559. $1,779.33� 72� 12� ILTOR(L/R)(S/B4/T4)SG33721( )( )( )( )( )( )( ) 1,321. 1,519. 1,606. 1,840.39� 60� 12� ILTOR(L/R)(S/B4/T4)SG39601( )( )( )( )( )( )( ) 1,319. 1,516. 1,601. 1,834.39� 72� 12� ILTOR(L/R)(S/B4/T4)SG39721( )( )( )( )( )( )( ) 1,350. 1,558. 1,657. 1,907.



Left hand shown

33� 60� 15� ILTOR(L/R)(S/B4/T4)SG33602( )( )( )( )( )( )( ) 1,320. 1,508. 1,584. 1,804.33� 72� 15� ILTOR(L/R)(S/B4/T4)SG33722( )( )( )( )( )( )( ) 1,346. 1,544. 1,631. 1,865.39� 60� 15� ILTOR(L/R)(S/B4/T4)SG39602( )( )( )( )( )( )( ) 1,344. 1,541. 1,626. 1,859.39� 72� 15� ILTOR(L/R)(S/B4/T4)SG39722( )( )( )( )( )( )( ) 1,375. 1,583. 1,682. 1,932.



Left hand shown

33� 60� 18� ILTOR(L/R)(S/B4/T4)(SG/SC)33603( )( )( )( )( )( )( ) 1,320. 1,508. 1,584. 1,804.33� 72� 18� ILTOR(L/R)(S/B4/T4)(SG/SC)33723( )( )( )( )( )( )( ) 1,346. 1,544. 1,631. 1,865.39� 60� 18� ILTOR(L/R)(S/B4/T4)(SG/SC)39603( )( )( )( )( )( )( ) 1,344. 1,541. 1,626. 1,859.39� 72� 18� ILTOR(L/R)(S/B4/T4)(SG/SC)39723( )( )( )( )( )( )( ) 1,375. 1,583. 1,682. 1,932.


Order Code

Example: ILTORLSSG36441IL Islands Collection by

Knoll�T TableOR Organic RectangleL Left hand, (R=Right)S Edge (S/B4/T4)SG Foot (SG/SC)33 Depth60 Width1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)S = Power square (All sizes)All grommets are center on theworksurface.










Application Notes





15

Straight Leg - Desk Height29� HighRound Tables



48� 48� 29� ILTRD(S/B4/T4)(SG/SC)484( )( )( )( )( )( )( ) $1,351. $1,549. $1,635. $1,856.54� 54� 29� ILTRD(S/B4/T4)(SG/SC)544( )( )( )( )( )( )( ) 1,388. 1,600. 1,703. 1,944.60� 60� 29� ILTRD(S/B4/T4)(SG/SC)604( )( )( )( )( )( )( ) 1,434. 1,662. 1,784. 2,049.


Order Code


Knoll�T TableRD RoundS Edge (S/B4/T4)SG Foot (SG/SC)48 Size4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish












Height 29� is to top of worksurface.

Application Notes





16

Straight Leg - Desk Height29� HighSquare Tables with Square and Curved Corners



36� 36� 29� ILTSQ(S/B4/T4)(SG/SC)364( )( )( )( )( )( )( ) $1,137. $1,260. $1,316. $1,391.42� 42� 29� ILTSQ(S/B4/T4)(SG/SC)424( )( )( )( )( )( )( ) 1,169. 1,304. 1,374. 1,466.48� 48� 29� ILTSQ(S/B4/T4)(SG/SC)484( )( )( )( )( )( )( ) 1,202. 1,376. 1,461. 1,579.54� 54� 29� ILTSQ(S/B4/T4)(SG/SC)544( )( )( )( )( )( )( ) 1,243. 1,431. 1,534. 1,674.60� 60� 29� ILTSQ(S/B4/T4)(SG/SC)604( )( )( )( )( )( )( ) 1,288. 1,493. 1,615. 1,780.


Square Table with curved corners29� High

36� 36� 29� ILTSC(S/B4/T4)(SG/SC)364( )( )( )( )( )( )( ) 1,137. 1,260. 1,316. 1,391.42� 42� 29� ILTSC(S/B4/T4)(SG/SC)424( )( )( )( )( )( )( ) 1,169. 1,304. 1,374. 1,466.48� 48� 29� ILTSC(S/B4/T4)(SG/SC)484( )( )( )( )( )( )( ) 1,202. 1,376. 1,461. 1,579.54� 54� 29� ILTSC(S/B4/T4)(SG/SC)544( )( )( )( )( )( )( ) 1,243. 1,431. 1,534. 1,674.60� 60� 29� ILTSC(S/B4/T4)(SG/SC)604( )( )( )( )( )( )( ) 1,288. 1,493. 1,615. 1,780.


Order Code

Example: ILTSQSSG364IL Island Collection by

Knoll�T TableSQ Square,

SC=Square with Curvedcorners

S Edge (S/B4/T4)SG Foot (SG/SC)36 Size4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)All grommets are centered on theworksurface.










Application Notes

The following upcharges apply:Beveled Edge (B4 & T4): $650 forSquare TableBeveled Edge (B4 & T4): $500 forSoft Square TableCasters: $30Grommets D4, D8 & D12: $80Polished finish: $225 (Top plate,leg or both)




17

Straight Leg - Desk Height29� HighSoft Square Tables


Soft Square Table29� High

42� 42� 29� ILTSS(S/B4/T4)(SG/SC)424( )( )( )( )( )( )( ) $1,169. $1,304. $1,374. $1,516.48� 48� 29� ILTSS(S/B4/T4)(SG/SC)484( )( )( )( )( )( )( ) 1,207. 1,354. 1,440. 1,602.54� 54� 29� ILTSS(S/B4/T4)(SG/SC)544( )( )( )( )( )( )( ) 1,243. 1,431. 1,534. 1,724.60� 60� 29� ILTSS(S/B4/T4)(SG/SC)604( )( )( )( )( )( )( ) 1,288. 1,493. 1,615. 1,830.


Example: ILTSSSSG424IL Island Collection by

Knoll�T TableSS Soft SquareS Edge (S/B4/T4)SG Foot (SG/SC)42 Size4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish

Specification Notes


N = None (no grommet)D4 = Narrow slot 4�W (42� only)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)All grommets are centered on theworksurface.










Application Notes





18

Straight Leg - Desk Height29� HighSoft Pentagon and Soft Pentagon Type 2 Tables


Soft Pentagon Table29� High

48� 48� 29� ILTPT(S/B4/T4)(SG/SC)484( )( )( )( )( )( ) $1,642. $1,837. $1,922. $2,154.54� 54� 29� ILTPT(S/B4/T4)(SG/SC)544( )( )( )( )( )( ) 1,683. 1,892. 1,995. 2,249.60� 60� 29� ILTPT(S/B4/T4)(SG/SC)604( )( )( )( )( )( ) 1,728. 1,954. 2,076. 2,354.



48� 48� 29� ILTP2(S/B4/T4)(SG/SC)484( )( )( )( )( )( ) 1,642. 1,837. 1,922. 2,154.54� 54� 29� ILTP2(S/B4/T4)(SG/SC)544( )( )( )( )( )( ) 1,683. 1,892. 1,995. 2,249.60� 60� 29� ILTP2(S/B4/T4)(SG/SC)604( )( )( )( )( )( ) 1,728. 1,892. 1,995. 2,249.


Order Code

Example: ILTPTSSG484IL Islands Collection by

Knoll�T TablePT Soft PentagonS Edge (S/B4/T4)SG Foot (SG/SC)48 Size4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)All grommets are centered on theworksurface.










Application Notes





19

Straight Leg - Desk Height29� HighOrganic Pentagon Type A and B



48� 48� 29� ILTOPA(S/B4/T4)(SG/SC)484( )( )( )( )( )( ) $1,642. $1,837. $1,922. $2,154.54� 54� 29� ILTOPA(S/B4/T4)(SG/SC)544( )( )( )( )( )( ) 1,683. 1,892. 1,995. 2,249.60� 60� 29� ILTOPA(S/B4/T4)(SG/SC)604( )( )( )( )( )( ) 1,728. 1,954. 2,076. 2,354.



48� 48� 29� ILTOPB(S/B4/T4)(SG/SC)484( )( )( )( )( )( ) 1,642. 1,837. 1,922. 2,154.54� 54� 29� ILTOPB(S/B4/T4)(SG/SC)544( )( )( )( )( )( ) 1,683. 1,892. 1,995. 2,249.60� 60� 29� ILTOPB(S/B4/T4)(SG/SC)604( )( )( )( )( )( ) 1,728. 1,954. 2,076. 2,354.


Order Code

Example: ILTOPASSG484IL Islands Collection by

Knoll�T TableOPA Organic Pentagon Type

AS Edge (S/B4/T4)SG Foot (SG/SC)48 Size4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)All grommets are centered on theworksurface.










Application Notes





20

Straight Leg - Desk Height29� HighOrganic Triangle, Left and Right



Left hand shown

36� 44� 29� ILTOT(L/R)(S/B4/T4)(SG/SC)36444( )( )( )( )( )( ) $1,344. $1,523. $1,587. $1,793.42� 51� 29� ILTOT(L/R)(S/B4/T4)(SG/SC)42514( )( )( )( )( )( ) 1,381. 1,573. 1,653. 1,879.48� 59� 29� ILTOT(L/R)(S/B4/T4)(SG/SC)48594( )( )( )( )( )( ) 1,427. 1,635. 1,735. 1,986.54� 66� 29� ILTOT(L/R)(S/B4/T4)(SG/SC)54664( )( )( )( )( )( ) 1,476. 1,700. 1,822. 2,099.60� 74� 29� ILTOT(L/R)(S/B4/T4)(SG/SC)60744( )( )( )( )( )( ) 1,534. 1,779. 1,926. 2,234.



Order Code

Example: ILTOTLSSG36444IL Islands Collection by

Knoll�T TableOT Organic TriangleL Left hand (R=Right

hand)S Edge (S/B4/T4)SG Foot (SG/SC)36 Depth44 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D8 = Narrow slot 8�W (3644,4251)D12 = Narrow slot 12�W (4859,5460, 6074)S = Power square (All sizes)All grommets are centered on theworksurface.










Application Notes





21

Straight Leg - Desk Height29� HighOrganic Elongated Pentagon, Left and Right



Left hand shown

35� 60� 29� ILTOE(L/R)(S/B4/T4)(SG/SC)35604( )( )( )( )( )( )( ) $1,378. $1,569. $1,648. $1,872.39� 66� 29� ILTOE(L/R)(S/B4/T4)(SG/SC)39664( )( )( )( )( )( )( ) 1,410. 1,612. 1,704. 1,945.42� 72� 29� ILTOE(L/R)(S/B4/T4)(SG/SC)42724( )( )( )( )( )( )( ) 1,440. 1,652. 1,758. 2,015.42� 72� 29� ILTOE(L/R)(S/B4/T4)(SG/SC)45784( )( )( )( )( )( )( ) 1,472. 1,695. 1,815. 2,090.48� 84� 29� ILTOE(L/R)(S/B4/T4)(SG/SC)48844( )( )( )( )( )( )( ) 1,507. 1,742. 1,877. 2,170.


Order Code

Example: ILTOELSSG35604IL Islands Collection by

Knoll�T TableOE Organic Elongated

PentagonL Left hand (R=Right

hand)S Edge (S/B4/T4)SG Foot (SG/SC)35 Depth60 Width4 271/2� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D12 = Narrow slot 12�W (Allsizes)S = Power square (All sizes)

2. Grommet Location:CB = Centered Back Edge (Shortedge)CF = Centered Front Edge (Longedge)










Application Notes





22

Straight Leg - Desk Height29� HighOrganic Rectangle, Left and Right



Left hand shown

33� 60� 29� ILTOR(L/R)(S/B4/T4)(SG/SC)33604( )( )( )( )( )( )( ) $1,370. $1,558. $1,634. $1,854.33� 72� 29� ILTOR(L/R)(S/B4/T4)(SG/SC)33724( )( )( )( )( )( )( ) 1,396. 1,594. 1,681. 1,915.39� 60� 29� ILTOR(L/R)(S/B4/T4)(SG/SC)39604( )( )( )( )( )( )( ) 1,394. 1,591. 1,676. 1,909.39� 72� 29� ILTOR(L/R)(S/B4/T4)(SG/SC)39724( )( )( )( )( )( )( ) 1,425. 1,633. 1,732. 1,982.


Order Code

Example: ILTORLSSG33604IL Islands Collection by

Knoll�T TableOR Organic RectangleL Left hand (R=Right

hand)S Edge (S/B4/T4)SG Foot (SG/SC)33 Depth60 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D8 = Narrow slot 8�W (All sizes)S = Power square (All sizes)

2. Grommet location:CB = Centered Back Edge (Shortedge)CF = Centered Front Edge (Longedge)










Application Notes





23

Straight Leg - Desk Height29� HighRectilinear Tables with Square Corners


Rectilnear Table withsquare corners

24� 48� 29� ILTRL(S/B4/T4)(SG/SC)48244( )( )( )( )( )( )( ) $1,125. $1,216. $1,264. $1,373.54� 29� ILTRL(S/B4/T4)(SG/SC)54244( )( )( )( )( )( )( ) 1,137. 1,229. 1,282. 1,397.60� 29� ILTRL(S/B4/T4)(SG/SC)60244( )( )( )( )( )( )( ) 1,148. 1,243. 1,300. 1,420.66� 29� ILTRL(S/B4/T4)(SG/SC)66244( )( )( )( )( )( )( ) 1,162. 1,281. 1,346. 1,480.72� 29� ILTRL(S/B4/T4)(SG/SC)72244( )( )( )( )( )( )( ) 1,173. 1,294. 1,363. 1,502.78� 29� ILTRL(S/B4/T4)(SG/SC)78244( )( )( )( )( )( )( ) 1,184. 1,308. 1,381. 1,525.78� 29� ILTRL(S/B4/T4)(SG/SC)84244( )( )( )( )( )( )( ) 1,197. 1,351. 1,428. 1,586.

30� 48� 29� ILTRL(S/B4/T4)(SG/SC)48304( )( )( )( )( )( )( ) 1,148. 1,423. 1,300. 1,420.54� 29� ILTRL(S/B4/T4)(SG/SC)54304( )( )( )( )( )( )( ) 1,162. 1,260. 1,323. 1,450.60� 29� ILTRL(S/B4/T4)(SG/SC)60304( )( )( )( )( )( )( ) 1,176. 1,278. 1,345. 1,479.66� 29� ILTRL(S/B4/T4)(SG/SC)66304( )( )( )( )( )( )( ) 1,192. 1,318. 1,394. 1,542.72� 29� ILTRL(S/B4/T4)(SG/SC)72304( )( )( )( )( )( )( ) 1,206. 1,335. 1,416. 1,571.78� 29� ILTRL(S/B4/T4)(SG/SC)78304( )( )( )( )( )( )( ) 1,219. 1,351. 1,438. 1,599.84� 29� ILTRL(S/B4/T4)(SG/SC)84304( )( )( )( )( )( )( ) 1,234. 1,397. 1,488. 1,664.

36� 48� 29� ILTRL(S/B4/T4)(SG/SC)48364( )( )( )( )( )( )( ) 1,171. 1,271. 1,336. 1,467.54� 29� ILTRL(S/B4/T4)(SG/SC)54364( )( )( )( )( )( )( ) 1,188. 1,291. 1,363. 1,502.60� 29� ILTRL(S/B4/T4)(SG/SC)60364( )( )( )( )( )( )( ) 1,205. 1,312. 1,390. 1,537.66� 29� ILTRL(S/B4/T4)(SG/SC)66364( )( )( )( )( )( )( ) 1,222. 1,355. 1,442. 1,605.72� 29� ILTRL(S/B4/T4)(SG/SC)72364( )( )( )( )( )( )( ) 1,239. 1,375. 1,469. 1,640.78� 29� ILTRL(S/B4/T4)(SG/SC)78364( )( )( )( )( )( )( ) 1,255. 1,395. 1,495. 1,674.84� 29� ILTRL(S/B4/T4)(SG/SC)84364( )( )( )( )( )( )( ) 1,272. 1,443. 1,549. 1,744.


Order Code

Example: ILTRLSSG48244IL Islands Collection by

Knoll�T TableRL Rectilinear Square

CornerS Edge (S/B4/T4)SG Foot (SG/SC)48 Width24 Depth4 29� HighN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D12 = Narrow slot 12�W (Allsizes)D30 = Narrow slot 30�W(Available on 60� and 96�w tops)S = Power square (All sizes)


3. Grommet location:CC = Centered/Centered(Centered on both length andwidth)CB = Centered/Back(Centered across the width,recessed from back edge)









Application Notes

The following upcharges apply:Beveled Edge (B4 & T4): $650Casters: $30Grommets D12: $80Grommets D30: $100Polished finish: $225 (Top plate,leg or both)




24

Straight Leg - Desk Height29� HighRectilinear Tables with Curved Corners


Rectilinear Table withCurved corners

24� 48� 29� ILTRC(S/B4/T4)(SG/SC)48244( )( )( )( )( )( )( ) $1,125. $1,396. $1,394. $1,607.54� 29� ILTRC(S/B4/T4)(SG/SC)54244( )( )( )( )( )( )( ) 1,137. 1,409. 1,412. 1,631.60� 29� ILTRC(S/B4/T4)(SG/SC)60244( )( )( )( )( )( )( ) 1,148. 1,423. 1,430. 1,654.66� 29� ILTRC(S/B4/T4)(SG/SC)66244( )( )( )( )( )( )( ) 1,162. 1,448. 1,459. 1,692.72� 29� ILTRC(S/B4/T4)(SG/SC)72244( )( )( )( )( )( )( ) 1,173. 1,462. 1,477. 1,715.72� 29� ILTRC(S/B4/T4)(SG/SC)78244( )( )( )( )( )( )( ) 1,184. 1,475. 1,494. 1,737.84� 29� ILTRC(S/B4/T4)(SG/SC)84244( )( )( )( )( )( )( ) 1,197. 1,523. 1,550. 1,810.

30� 48� 29� ILTRC(S/B4/T4)(SG/SC)48304( )( )( )( )( )( )( ) 1,148. 1,423. 1,430. 1,654.54� 29� ILTRC(S/B4/T4)(SG/SC)54304( )( )( )( )( )( )( ) 1,162. 1,440. 1,453. 1,684.60� 29� ILTRC(S/B4/T4)(SG/SC)60304( )( )( )( )( )( )( ) 1,176. 1,458. 1,475. 1,713.66� 29� ILTRC(S/B4/T4)(SG/SC)66304( )( )( )( )( )( )( ) 1,192. 1,485. 1,507. 1,754.72� 29� ILTRC(S/B4/T4)(SG/SC)72304( )( )( )( )( )( )( ) 1,206. 1,502. 1,529. 1,783.78� 29� ILTRC(S/B4/T4)(SG/SC)78304( )( )( )( )( )( )( ) 1,219. 1,518. 1,551. 1,811.84� 29� ILTRC(S/B4/T4)(SG/SC)84304( )( )( )( )( )( )( ) 1,234. 1,569. 1,610. 1,888.

36� 48� 29� ILTRC(S/B4/T4)(SG/SC)48364( )( )( )( )( )( )( ) 1,171. 1,451. 1,466. 1,701.54� 29� ILTRC(S/B4/T4)(SG/SC)54364( )( )( )( )( )( )( ) 1,188. 1,471. 1,493. 1,736.60� 29� ILTRC(S/B4/T4)(SG/SC)60364( )( )( )( )( )( )( ) 1,205. 1,492. 1,520. 1,771.66� 29� ILTRC(S/B4/T4)(SG/SC)66364( )( )( )( )( )( )( ) 1,222. 1,522. 1,556. 1,818.72� 29� ILTRC(S/B4/T4)(SG/SC)72364( )( )( )( )( )( )( ) 1,239. 1,542. 1,582. 1,852.78� 29� ILTRC(S/B4/T4)(SG/SC)78364( )( )( )( )( )( )( ) 1,255. 1,562. 1,609. 1,887.84� 29� ILTRC(S/B4/T4)(SG/SC)84364( )( )( )( )( )( )( ) 1,272. 1,615. 1,671. 1,967.


Order Code

Example: ILTRCSSG48244IL Islands Collection by

Knoll�T TableRC Rectilinear with

Curved CornerS Edge (S/B4/T4)SG Foot (SG/SC)48 Width24 Depth4 29� HighN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D12 = Narrow slot 12�W (Allsizes)D30 = Narrow slot 30�W(Available on 60� to 84�w tops)S = Power square (All sizes)


3. Grommet location:CC = Centered/Centered(Centered on both length andwidth)CB = Centered/Back(Centered across the width,recessed from back edge)









Application Notes

The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D12: $80Grommets D30: $100Polished finish: $225 (Top plate,leg or both)




25

Straight Leg - Desk Height29� High120° Degree Tables


120° Degree Table withSquare corners

24� 33� 29� ILTVS(S/B4/T4)(SG/SC)24334( )( )( )( )( )( )( ) $1,291. $1,452. $1,493. $1,671.30� 36� 29� ILTVS(S/B4/T4)(SG/SC)30364( )( )( )( )( )( )( ) 1,310. 1,477. 1,527. 1,715.


120° Degree Table withCurved corners

24� 33� 29� ILTVR(S/B4/T4)(SG/SC)24334( )( )( )( )( )( )( ) 1,291. 1,452. 1,493. 1,671.30� 36� 29� ILTVR(S/B4/T4)(SG/SC)30364( )( )( )( )( )( )( ) 1,310. 1,477. 1,527. 1,715.


Order Code

Example: ILTVSSSG24334IL Islands Collection by

Knoll�T TableVS 120° Table with Square

corners(CY=with Curvedcorners)

S Edge (S/B4/T4)SG Foot (SG/SC)24 Depth33 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D8 = Narrow slot 8�W (All sizes)S = Power square










Application Notes





26

Straight Leg - Desk Height29� HighCairo Shaped Tables


Cairo Shaped Table withSquare corners

30� 52� 29� ILTCS(S/B4/T4)(SG/SC)52304( )( )( )( )( )( )( ) $1,342. $1,521. $1,584. $1,789.36� 63� 29� ILTCS(S/B4/T4)(SG/SC)63364( )( )( )( )( )( )( ) 1,389. 1,584. 1,668. 1,898.

Cairo Shaped Table withCurved corners

30� 52� 29� ILTCY(S/B4/T4)(SG/SC)52304( )( )( )( )( )( )( ) 1,342. 1,521. 1,584. 1,789.36� 63� 29� ILTCY(S/B4/T4)(SG/SC)63364( )( )( )( )( )( )( ) 1,389. 1,584. 1,668. 1,898.

Order Code

Example: ILTCSSSG52304IL Islands Collection by

Knoll�T TableCS Cairo with Square

cornersCY=with Curvedcorners)

S Edge (S/B4/T4)SG Foot (SG/SC)52 Width30 Depth4 29� HighN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D12 = Narrow slot 12�W (Allsizes)S = Power square


3. Grommet location:CB = Centered back edge (shortedge)CF = Centered front edge (longedge)









Application Notes





27

X-Base Tables - Occasional Heights12�, 15� and 18� HighRound Tables



30� 12� ILTRD(S/B/T)X301( )( )( )( )( )( ) $954. $1,121. $1,165. $1,335.36� 12� ILTRD(S/B/T)X361( )( )( )( )( )( ) 982. 1,157. 1,213. 1,397.42� 12� ILTRD(S/B/T)X421( )( )( )( )( )( ) 1,014. 1,200. 1,269. 1,470.



30� 15� ILTRD(S/B/T)X302( )( )( )( )( )( ) 954. 1,121. 1,165. 1,335.36� 15� ILTRD(S/B/T)X362( )( )( )( )( )( ) 982. 1,157. 1,213. 1,397.42� 15� ILTRD(S/B/T)X422( )( )( )( )( )( ) 1,014. 1,200. 1,269. 1,470.



30� 18� ILTRD(S/B/T)(X/XC)303( )( )( )( )( )( ) 954. 1,121. 1,165. 1,335.36� 18� ILTRD(S/B/T)(X/XC)363( )( )( )( )( )( ) 982. 1,157. 1,213. 1,397.42� 18� ILTRD(S/B/T)(X/XC)423( )( )( )( )( )( ) 1,014. 1,200. 1,269. 1,470.


Order Code

Example: ILTRDSX301IL Islands Collection by

Knoll�T TableRD RoundS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish



N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)




5. Cone finish (36� & 42�):Painted/texturedPolished aluminum

6. Column finishPainted/texturedPolished aluminum

7. Foot finishPainted/texturedPolished aluminum


Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides

*Foot:X = GlideXC = Caster


Application Notes

The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)




28

X-Base Tables - Occasional Heights12�, 15� and 18� HighSquare Tables



30� 12� ILTSQ(S/B/T)X301( )( )( )( )( )( ) $809. $924. $968. $1,078.36� 12� ILTSQ(S/B/T)X361( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 12� ILTSQ(S/B/T)X421( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.



30� 15� ILTSQ(S/B/T)X302( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 15� ILTSQ(S/B/T)X362( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 15� ILTSQ(S/B/T)X422( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.



30� 18� ILTSQ(S/B/T)(X/XC)303( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 18� ILTSQ(S/B/T)(X/XC)363( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 18� ILTSQ(S/B/T)(X/XC)423( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.


Order Code

Example: ILTSQSX301IL Islands Collection by

Knoll�T TableSQ SquareS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish














Application Notes





29

X-Base Tables - Occasional Heights12�, 15� and 18� HighSoft Square Tables



30� 12� ILTSS(S/B/T)X301( )( )( )( )( )( ) $809. $924. $968. $1,078.36� 12� ILTSS(S/B/T)X361( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 12� ILTSS(S/B/T)X421( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.



30� 15� ILTSS(S/B/T)X302( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 15� ILTSS(S/B/T)X362( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 15� ILTSS(S/B/T)X422( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.



30� 18� ILTSS(S/B/T)(X/XC)303( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 18� ILTSS(S/B/T)(X/XC)363( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 18� ILTSS(S/B/T)(X/XC)423( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.


Order Code

Example: ILTSSSX301IL Islands Collection by

Knoll�T TableSS Soft SquareS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish














Application Notes





30

X-Base Tables - Occasional Heights12�, 15� and 18� HighSquare Tables with Curved Corners



30� 12� ILTSC(S/B/T)X301( )( )( )( )( )( ) $809. $924. $968. $1,078.36� 12� ILTSC(S/B/T)X361( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 12� ILTSC(S/B/T)X421( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.



30� 15� ILTSC(S/B/T)X302( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 15� ILTSC(S/B/T)X362( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 15� ILTSC(S/B/T)X422( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.



30� 18� ILTSC(S/B/T)(X/XC)303( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 18� ILTSC(S/B/T)(X/XC)363( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 18� ILTSC(S/B/T)(X/XC)423( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.


Order Code

Example: ILTSCSX301IL Islands Collection by

Knoll�T TableSC Square table with curved

cornersS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish














Application Notes





31

X-Base Tables - Occasional Heights12�, 15� and 18� HighSoft Pentagon



30� 12� ILTSP(S/B/T)X301( )( )( )( )( )( ) $998. $1,161. $1,205. $1,387.36� 12� ILTSP(S/B/T)X361( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 12� ILTSP(S/B/T)X421( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.



30� 15� ILTSP(S/B/T)X302( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 15� ILTSP(S/B/T)X362( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 15� ILTSP(S/B/T)X422( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.



30� 18� ILTSP(S/B/T)(X/XC)303( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 18� ILTSP(S/B/T)(X/XC)363( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 18� ILTSP(S/B/T)(X/XC)423( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.


Order Code

Example: ILTSPSX301IL Islands Collection by

Knoll�T TableSP Soft PentagonS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish














Application Notes





32

X-Base Tables - Occasional Heights12�, 15� and 18� HighOrganic Pentagon Type A



30� 30� 12� ILTOPA(S/B/T)X301( )( )( )( )( )( )( ) $998. $1,161. $1,205. $1,387.36� 36� 12� ILTOPA(S/B/T)X361( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 12� ILTOPA(S/B/T)X421( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.



30� 30� 15� ILTOPA(S/B/T)X302( )( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 36� 15� ILTOPA(S/B/T)X362( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 15� ILTOPA(S/B/T)X422( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.



30� 30� 18� ILTOPA(S/B/T)(X/XC)303( )( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 36� 18� ILTOPA(S/B/T)(X/XC)363( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 18� ILTOPA(S/B/T)(X/XC)423( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.


Order Code

Example: ILTOPASX301IL Islands Collection by

Knoll�T TableOPA Organic Pentagon Type

AS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish














Application Notes





33

X-Base Tables - Occasional Heights12�, 15� and 18� HighOrganic Pentagon Type B



30� 30� 12� ILTOPB(S/B/T)X301( )( )( )( )( )( )( ) $998. $1,161. $1,205. $1,387.36� 36� 12� ILTOPB(S/B/T)X361( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 12� ILTOPB(S/B/T)X421( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.



30� 30� 15� ILTOPB(S/B/T)X302( )( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 36� 15� ILTOPB(S/B/T)X362( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 15� ILTOPB(S/B/T)X422( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.



30� 30� 18� ILTOPB(S/B/T)(X/XC)303( )( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 36� 18� ILTOPB(S/B/T)(X/XC)363( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 18� ILTOPB(S/B/T)(X/XC)423( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.


Order Code

Example: ILTOPBSX301IL Islands Collection by

Knoll�T TableOPB Organic Pentagon Type

BS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish














Application Notes





34

X-Base Tables - Desk Height29� HighRound Tables



30� 30� 29� ILTRD(S/B/T)(X/XC)304( )( )( )( )( )( )( ) $979. $1,146. $1,190. $1,360.36� 36� 29� ILTRD(S/B/T)(X/XC)364( )( )( )( )( )( )( ) 1,007. 1,182. 1,238. 1,422.42� 42� 29� ILTRD(S/B/T)(X/XC)424( )( )( )( )( )( )( ) 1,039. 1,225. 1,294. 1,495.


Order Code

Example: ILTRDSX304IL Islands Collection by

Knoll�T TableRD RoundS Edge (S/B/T)X Foot (X/XC)30 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish







5. Cone finish:Painted/texturedPolished aluminum

6. Column finish:Painted/texturedPolished aluminum






Application Notes





35

X-Base Tables - Desk Height29� HighSquare, Soft Square and Square with Curved Corners Tables



30� 29� ILTSQ(S/B/T)(X/XC)304( )( )( )( )( )( ) $834. $949. $993. $1,103.36� 29� ILTSQ(S/B/T)(X/XC)364( )( )( )( )( )( ) 862. 985. 1,041. 1,166.42� 29� ILTSQ(S/B/T)(X/XC)424( )( )( )( )( )( ) 894. 1,029. 1,099. 1,241.



30� 29� ILTSS(S/B/T)(X/XC)304( )( )( )( )( )( ) 834. 949. 993. 1,103.36� 29� ILTSS(S/B/T)(X/XC)364( )( )( )( )( )( ) 862. 985. 1,041. 1,166.42� 29� ILTSS(S/B/T)(X/XC)424( )( )( )( )( )( ) 894. 1,029. 1,099. 1,241.



30� 29� ILTSC(S/B/T)(X/XC)304( )( )( )( )( )( ) 834. 949. 993. 1,103.36� 29� ILTSC(S/B/T)(X/XC)364( )( )( )( )( )( ) 862. 985. 1,041. 1,166.42� 29� ILTSC(S/B/T)(X/XC)424( )( )( )( )( )( ) 894. 1,029. 1,099. 1,241.


Order Code

Example: ILTSQSX304IL Islands Collection by

Knoll�T TableSQ Square

SS=Soft SquareS Edge (S/B/T)X Foot (X/XC)30 Width / Depth4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge fi

Islands Collection by Knoll...628 Dark Mahogany 639 Light Cherry 641 Black Oak 506 Maple 509 Cherry...

Documents

Transcript of Islands Collection by Knoll...628 Dark Mahogany 639 Light Cherry 641 Black Oak 506 Maple 509 Cherry...