Ishiriya Technology-4G Protoclos

8/11/2019 Ishiriya Technology-4G Protoclos

1/19

[Type text]MOBILE APPLICATION DEVELOPMENT

WIRELESS COMMUNICATION CHIPSETS AND MOBILE DE

DIGITAL SIGNAL PROCESSING AND DATA ACQUISTION

WIRELESS TEST AND MEASUREMENT

M COMMUNICATIONS

RELESS APPLICATIONS

4G

M COMMUNICATIONS

RELESS APPLICATIONS


2/19





M COMMUNICATIONS

RELESS APPLICATIONS

Contents1. Introduction ............................................................................................................................................. 3

1.1 Introduction to 4G .............................................................................................................................. 3

1.2 4G Network Hierarchy ........................................................................................................................ 4

1.3 Features of 4G Networks .................................................................................................................... 5

2. Introduction to LTE ................................................................................................................................... 6

2.1 Introduction ........................................................................................................................................ 6

2.2 Overall Architecture Overview ........................................................................................................... 7

2.2.1 Core Network .............................................................................................................................. 8

2.2.2 The Access Network ........................................................................................................................ 9

2.2.3 The Roaming Architecture ........................................................................................................... 10

3. Protocol Architecture .............................................................................................................................. 11

3.1 User Plane ......................................................................................................................................... 11

3.2 Control Plane ..................................................................................................................................... 12

4. The EUTRAN Network interfaces: S1 Interface ................................................................................... 13

4.1 Protocol Structure Over S1 ............................................................................................................... 13

4.1.1 Control Plane ............................................................................................................................. 13

4.1.2 User Plane ................................................................................................................................. 14

4.2 Context Management over S1 .......................................................................................................... 15

4.3 Mobility over S1 ................................................................................................................................ 16

4.3.1 Intra LTE mobility ...................................................................................................................... 16

4.3.2 InterRadio Access Technology Mobility ............................................................................... 17

5. The EUTRAN Network interfaces: X2 Interface ................................................................................... 18

5.1 Protocol Structure Over X2 ............................................................................................................... 18

5.2 Mobility Over X2 ............................................................................................................................... 19


3/19





M COMMUNICATIONS

RELESS APPLICATIONS

1. Introduction1.1 Introduction to 4G

The 4G Mobile Networks are being developed with 2 main objectives. One of the Objectives is to

overcome the shortcomings and limitations of 3G.

The 4G Mobile Networks are being envisioned to offer higher bandwidths upto value of 100Mbps.

Unlike the predecessor networks of 4G(i.e 2G and 3G) which consisted of welldefined cellular

network components, 4G are expected to consist of a collection of wireless networks.

These include the Personal Area Network using, for example Bluetooth, the local area networks

using WLAN, the satellitebased mobile networks, and enhanced 3G cellular networks.


4/19





M COMMUNICATIONS

RELESS APPLICATIONS

1.2 4G Network Hierarchy

Satellite Network Level

Horizontal Handovers

Cellular Network Level

Local Network Level

Personal Network Level

VerticalHandovers

At the Lowest Layer are the personal networks, which constitute of smart devices communicating

with each other over wireless links.

At the next level are the local networks. These could consist of local area networks using the

wireless LAN technology.

The Cellular Network level comes next, which will consist of existing 2G and 3Gcellular networks, as

well as enhanced 3G cellular networks.

At the topMost level will be satellitebased mobile networks, which have a much greater

coverage area than the cellular networks, or any of the networks at the lowest levels.

Horizontal Handovers will take place within one network.

Vertical Handovers will be performed between different network levels.


5/19





M COMMUNICATIONS

RELESS APPLICATIONS

1.3 Features of 4G Networks

Higher bandwidths4G networks provides higher bandwidths to support multimedia services.

PacketSwitched Network4G Networks are based on PacketSwitched networks.

Stringent Network SecurityNetwork Security in 4G Networks is expected to be improvised.

Global Mobility and Network ScalabilityThis is Requirements of 4G networks.


6/19





M COMMUNICATIONS

RELESS APPLICATIONS

2. Introduction to LTE

2.1 Introduction

LTE has been designed to support only packetswitched services.

It aims to provide seamless internet protocol (IP) connectivity between User Equipment and Packet

data n/w (PDN).

LTE encompasses the evolution of universal Mobile Telecommunication System (UMTS) Radio

Access through the evolved UTRAN (E-UTRAN) , it is accompanied by an evolution of the non radioaspects under the term System Architecture Evolution (SAE) which include the evolved packet

core (EPC) n/w.

Together the LTE and SAE Comprises the evolved packet system (EPS).

EPS uses the concept of EPS bearers to route IP traffic from a gateway in the PDN to UE.

A bearer is an IP Packet flow with a defined (QoS) between Gateway and UE.


7/19





M COMMUNICATIONS

RELESS APPLICATIONS

2.2 Overall Architecture Overview

UE eNode B S - GW

MME

HSS

P -GW

PCRF

Operators

IP services( for eg.IMS, PSS)LTE - Uu

S1 - MME

SI - U

S6a

S11

S5/S8

Gx Rx

SGi

Network Architecture

Network Architecture Includes the network elements and the standardized interfaces.

At a high level, the n/w is comprised of CN (EPC) and the access n/w E- UTRAN.

CN consists of many logical nodes access n/w is made up of one node the evolved node B (e-Node B)

Which connects to UEs.

Functional Split between E-UTRAN and EPC

PHY

RLC

MAC

PDCP

RRC

Dynamic Resource Allocation (Scheduler)

eNB measurement configuration and

provision

Radio Admission Control

Connection Mobility Control

RB Control

Inter-cell RRM

eNode B

E - UTRAN

NAS Security

Idle State Mobility handling

EPS Bearer Control

MME

Mobile Anchoring

S - GW

UE IP Address Allocation

P - GW

EPC

S1

Internet

Packet Filtering

Functional Spit between E-UTRAN and UE


8/19





M COMMUNICATIONS

RELESS APPLICATIONS

2.2.1 Core Network

The Core N/w (Called EPC in SAE) is responsible for overall control of UE and establishment of

bearers.

The main nodes of EPC are

o PDN Gateway ( PGW)

o Serving Gateway (SGW)

o Mobility Management Entity (MME)

EPC includes logical nodes and functions such as Home Subscriber server (HSS) and the Policy

control and charging Rules function (PCRF).

The Logical CN Nodes

PCRF

o The policy control and charging rules function is responsible for policy control decision-

making as well as for controlling functionalities in policy control enforcement function

(PCEF) which resides in PGW.

HSS

o The Home Subscriber Server contains users SAE subscription data such as the EPS-

subscribed QoS profile and any access restrictions for roaming.

o It also holds information about the PDNs to which the user can connect.

o This could be in the form of an access point name (APN) or a PDN address.

o The HSS holds dynamic information such as the identity of the MME to which the user is

currently attached or registered.

PGW

o The PDN Gateway is responsible for IP address allocation for the UE.

o It is responsible for the filtering ofdownlink user IP packets into the different QoS-based

bearers. SGW

o All user IP packets are transferred through the Serving Gateway, which serves as the local

mobility anchor for the data bearers when the UE moves between eNodeBs.

MME

o The Mobility Management Entity (MME) is the control node that processes the signaling

between the UE and the CN.

o The protocols running between the UE and the CN are known as the Non Access Stratum

(NAS) protocols.


9/19





M COMMUNICATIONS

RELESS APPLICATIONS

2.2.1.1 Non Access Stratum Procedures

The Non Access Stratum procedures are connection management procedures and similar to UMTS.

The main Change from UMTS is that EPS allows concatenation of some procedure to allow faster

establishment of the connection and the bearers.

The MME creates a UE context when UE is turned on and attaches to the network.

It assigns a unique identity termed the SAE Temporary mobile subscriber identity (STMSI) to the

UE that identifies the UE context in the MME.

This UE context holds user subscription downloaded from the HSS.

The UE context also holds the dynamic information such as list of bearers that are established and

the terminal capabilities.

2.2.2 The Access Network

MME/S -GW MME/S -GW

eNode B #1 eNode B #3

eNode B #2

S1 S1

X2

S1 S1

X2X2

E -UTRAN

EUTRAN Architecture

The Access Network of LTE and E- UTRAN consists of a network of eNodeBs.

The eNodeB is interconnected with each other by means of interface known as X2 and to the EPC

by means of S1 interface to the MME by means of S1-MME interface and to the S-GW by means of

S1U interface.

The protocols that run between eNodeBs and UE are known as AS Protocols.

EUTRAN is responsible for all radio related functions.


10/19





M COMMUNICATIONS

RELESS APPLICATIONS

2.2.3 The Roaming Architecture

UE E - UTRAN S - GW

MME

HSS

P - GW

PCRF

Operators IP services(for

example, IMS, PSS)

HPMN

VPLMN

LTE - Uu S1 - U

S1 - MMES11

S8

SGi

Gx Rx

Roaming Architecture

The network run by one operator in one country is known as Public land Mobile Network .

Roaming is where users are allowed to connect to PLMNs.

A Roaming user is connected to the EUTRAN , MME and SGW of the visited LTE Network.

LTE/SAE allows the PGW of either visited or the home network to be used.

Using the home networks P GW allows user to access the home operators service even in the

visited network.

A PGW in a visited network allows a local breakout to the internet in the visited network.


11/19





M COMMUNICATIONS

RELESS APPLICATIONS

3. Protocol Architecture

3.1 User Plane

L1

MAC

RLC

PDCP

IP

Application

L1

MAC

RLC

L1

L2

UDP/IP

L1 L1`

L2 L2

UDP/IP UDP/IP

L1

L2

UDP/IP

GTP - U

IP

PDCP GTP - U GTP - U GTP - U

Relay Relay

UE eNode B S - GW P - GWLTE - Uu S1 - U S5/S8 SG

E -UTRAN User Plane Protocol Stack

IP Packet for UE is encapsulated in an EPC Specific protocol and tunneled between the P-GW and the

eNodeB for transmission to the UE.

Different Tunneling protocol are used across the different interfaces.

The EUTRAN user plane protocol stack of the Packet Data Convergence Protocol (PDCP) , Radio

Link Controller (RLC) and Medium Access Control (MAC) sublayers are terminated in the eNodeB on

the network side.


12/19





M COMMUNICATIONS

RELESS APPLICATIONS

3.2 Control Plane

L1

MAC

RLC

PDCP

RRC

NAS

L1

MAC

RLC

L1

L2

IP

L1

L2

IP

SCTP

S1 -APRelay

UE eNode B MMELTE - Uu

E -UTRAN Control Plane Protocol Stack

PDCP SCTP

RRC S1 - AP

NAS

S1 - MME

The protocol stack for the control plane between the UE and MME is shown above.

The AS protocol are L1, MAC, RLC, PDCP and RRC.

The lower layers perform the same functions as for user plane with the exception that there is noheader compression function for control plane.

The Radio Resource Control (RRC) Protocol is known as layer 3in the AS protocol stack.

It is the main controlling function in AS, responsible for establishing the radio bearers and

configuring all the lower layers using RRC Signalling between eNodeB and the UE.


13/19





M COMMUNICATIONS

RELESS APPLICATIONS

4. The E UTRAN Network interfaces: S1 Interface

4.1 Protocol Structure Over S1

The Protocol Structure Over S1 is based on a full IP transport stack as used in GSM or UMTS

networks.

4.1.1 Control Plane

Physical Layer

SCTP

IP

Data Link Layer

S1 - AP

Transport

Network Layer

Radio Network

Layer

S1 Control Plane Protocol Stack

The protocol structure is based on Stream Control Transmission Protocol/IP (SCTP/IP) Stack.

The SCTP is known for its advanced features inherited from TCP that ensures the required delivery

of signaling messages.

An area of simplification in LTE is the direct mapping of S1 Application Protocol (S1AP) on top of

SCTP.

This results in simplified protocol stack with no intermediate connection management protocol ,

since connection are handled in application layer.

Multiplexing takes place between S1AP and SCTP.


14/19





M COMMUNICATIONS

RELESS APPLICATIONS

4.1.2 User Plane

Physical Layer

UDP

IPv6(IETF RFC 2460)

And/or

IPv4(IETF RFC 791)

Data Link Layer

S1U User Plane Protocol Stack

GTP - U

The Protocol structure of S1 User plane is based on the GTP/UDP5/IP stack which is known to UTMS

networks.

One of the advantage of using GPRS tunneling protocol user plane (GTPU) is its inherent facility to

identify tunnels.

A transport bearers is identified by the GTP tunnels endpoints and the IP address.

The S-GW sends the downlink packets of a given bearer to the eNodeB IP address.


15/19





M COMMUNICATIONS

RELESS APPLICATIONS

4.2 Context Management over S1

UE is associated with one particular MME for all its communications during its stay in pool area.

This creates context in MME for the UE.

This Particular MME is selected by the NAS Node Selection Function (NNSF) in the first eNodeB from

which the UE entered the pool area.

eNodeB MME

Initial Context Setup Request

Initial Context Setup Request

Initial Context Setup procedure

The UE becomes active under the coverage of a particular eNodeB in the pool area, the MME

provides the UE context information to this eNodeB using initial context Setup request message.

This enables eNodeB turn to create a context and manage the UE for the duration of its activity in

active mode.

The creation of the eNodeB context by the initial Context setup procedure also includes the creation

of one or several bearers including the default bearer.

UE context release command message sent from the MME, the UE context in the eNodeB is erased

and only the UE context in the MME remains.


16/19


17/19





M COMMUNICATIONS

RELESS APPLICATIONS

4.3.2 Inter Radio Access Technology Mobility

eNodeB MME

Uplink S1 CDMA 2000 Tunneling

Uplink S1 CDMA 2000 Tunneling procedure

Mobility toward CDMA 2000 dedicated uplink and Downlink procedures have been introduced inLTE.

The CDMA 2000 signalling between the UE and the CDMA 2000 system over S1 interface.


18/19





M COMMUNICATIONS

RELESS APPLICATIONS

5. The E UTRAN Network interfaces: X2 Interface

The X2 interface is used to interconnect eNodeBs.

5.1 Protocol Structure Over X2

Physical Layer

Data Link Layer

IP

SCTP

X2 - APRadio

Network

Layer

Transport

Network

Layer

X2 Signalling Bearer Protocol Stack

Physical Layer

Data Link Layer

IPv6 (IETF RFC 2460)

And orIPv4(IETF RFC 791)

UDP

GTP - U

Transport Network Layer for data streams over X2

The Control and User plane Stack over the X2 interface is shown in fig are same as those for the S1

Interface, with the exception that X2AP is substituted for S1AP.


19/19

[Type text]MOBILE APPLICATION DEVELOPMENT DIGITAL SIGNAL PROCESSING AND DATA ACQUISTIONM COMMUNICATIONS

5.2 Mobility Over X2

UESource LTE

eNodeBTarget LTE eNodeB MME/S-GW

1. Provisions of Area Restrictions2. Measurement Control

3. Handover Decision

5. Resource Setup

4. Handover Request

6. Handover Request ACK

7. Handover Command

8. Status Transfer

9. Handover Complete

10. Path Switch Request

11. Path Switch Request

ACK

12. Release Resource

Data Forwarding

Over X2 Interfaceto avoid data loss

X2 based handover procedure

Ishiriya Technology-4G Protoclos

Documents

Transcript of Ishiriya Technology-4G Protoclos