A j a x I . S .A j a x I . S .A j a x I . S .A j a x I . S .A j a x I . S .

1 0 0 % A U S T R A L I A N M A D E

Now up to 2000 kPa

2

I.S. Selection Chart - Direct Coupled - 1450 RPM

I.S. Selection Chart - Direct Coupled - 2900 RPM

I.S. Type Series Booklet

I.S. Type Series Booklet

1. Spheroidai Graphite (S.G.) Iron casing andbackcover is designed for 2000kPa pressures.

2. High efficiency enclosed (fully shrouded) impellerswith front and rear seals for lower hydraulicthrusts.

3. Double row rear bearings.

4. Dynamically balanced impeller.

5. Back pull out (B.P.O.) design.

● Greater resistance to hydraulic shock loading.● Increases the casing pressure limitations.

● Promotes longer pump life.● Lower bearing loads mean longer bearing life.● High efficiency means lower running costs.

● Allows pump to withstand higher suction pressures.● Longer bearing life.

● Smoother vibration free operation.● Lower shaft and bearing stress.● Longer pump life.

● Quick, easy withdrawal of the pump’s rotatingelement - time saving.

● End Suction Pump fully designed, cast, machined and assembled in Australia.● Produced in different materials, using different types of mechanical seals and lubricated with oil or grease.● Now available with 2000 kPa pressure rating.● Neither bulk-manufactured nor pre-ordered. Options available are provided to suit individual situations.● Flanges can be drilled to AS, ISO or ANSI standard.● Unmatched extended 24 month warranty from delivery at no extra cost.● 24 Hour Emergency Service Hotline to reduce downtime and for fast parts delivery.

BenefitsFeatures

3

Now up to 2000 kPa

Application

The KSB Ajax I.S. pump is suitable for handling water,condensate, oil, aggressive chemical products andother liquids mainly used in the following applications:● Water supply● Irrigation● Air conditioning● Fire fighting● Drainage● Heating● Chemical and petrochemical● Mining

Design

● Horizontal, single stage, end suction centrifugalpump generally in compliance to ISO 2858 and ISO5199.● The I.S. back pull out design allows for easy mainte-nance and repair as the rotating element maybe removed without disturbing the pipework.● Multiple options and domestic manufacturing allows

Designation: Standard Arrangement

125 - 500 A 10 B 2

Discharge diameter (mm)

Nominal impeller diameter (mm)

Mechanical Arrangement

Shaft Sealing

Materials of construction

Series

Size: Discharge branch size refers to the nominal bore.e.g. the 150mm discharge branch is suitably sized toaccept 6 inch pipe.

Shaft sealing: 10 Single mechanical sealX0 Packed stuffing box

Operating Data

I.S. Type Series Booklet

4

Pump Specifications

CasingsCasings are foot mounted, single stage, end suctiontype. All pump casings are radially split to permitremoval of the rotating assembly without disturbing thepump casing, suction and discharge piping, driver andcoupling alignment. The vertical centreline dischargemakes the casing self venting. Casings are suppliedwith a tapped drain plug at the lowest point for liquiddrainage. The back cover is held to the casing withstuds to facilitate rapid removal of rotating assembly.The pressure joint is sealed with a fully confinedgasket.

FlangesStandard pump flanges are drilled to AS2129-1978 -Table E with alternate drillings available. Gaugetappings are supplied on both suction and dischargeflanges.

ImpellersShrouded impellers have front and rear seals tominimize leakage and balance axial thrust otherwisecaused by the pump’s generated head. Impellers arefitted with balancing holes that return leakage tosuction and reduce the pressure acting on the stuffingbox to suction pressure. Impellers are dynamicallybalanced. Impellers are keyed to the shaft, and lockedaxially between sleeve and impeller nut. Direction ofrotation is clockwise as viewed from motor end.

Impeller NutImpeller nut tightens on the shaft in the direction ofnormal rotation. Fine pitched metric threads ensurelocking under most service conditions.

ShaftShafts are ground to fit the impeller, sleeve, bearingsand coupling. Large radius stress reducing fillets areprovided at shoulders.

BearingsDouble row rear and single row front deep groove ballbearings are grease lubricated through a grease nipplelocated in each bearing cover. A slinger is mounted onthe shaft to further protect the impeller and bearing.

Packed GlandFitted with removable stuffing box washer, lantern ringand square plaited packing. See page 7 for moreinformation.

Mechanical SealMost types and brands are available. See page 7 formore information.

for the particular application.

I.S. Type Series Booklet

5

Mechanical SealsIS range can be fitted with a wide range of propriety mechanical seals to eliminate glandleakage. KSB Ajax Pumps work in close co-operation with all major mechanical sealmanufacturers to ensure our customers obtain the optimal seal solutions for hazardousfluids, abrasive fluids or high temperature and pressure applications. Quench glands andcyclone Separators can be supplied as optional extras if required.

Oil LubricationThe bearing arrangement for the IS pump can easily be supplied with oil lubrication shouldthis be preferred due to the operating conditions.

Wear Rings & Shaft SleeveIn situations where abrasive liquids are being pumped, the close clearances betweenimpeller and casing can become worn resulting in reduced pumping efficiency. The ISrange can be fitted with renewable casing and cover wear rings in a variety of materials sothat the pumps can be refurbished quickly and inexpensively. For larger sizes KSB Ajaxcan also fit impeller wear rings. Shaft sleeves are available in a variety of materialsdepending on operating conditions.

Flange Options

KSB Ajax IS Casings are produced in local foundry so we have the flexibility to modifypattern equipment to produce a variety of flange configurations. Pumps can be suppliedwith Table E, Table F, ASA and ANSI; depending on clients plant standards to matchpreferred pipework codes.

Testing CapabilitiesWith increased emphasis on reliable performance many clients prefer their pumps to besubjected to hydrostatic and hydraulic testing. KSB Ajax Pumps have in-house testingcapabilities and will perform either witnessed or non-witnessed testing depending oncustomer requirements. Testing is performed to AS2417 Grade 2 unless otherwisespecified.

Mechanical Options

Pump Selection

For pump selection the hydraulic performance curvesshould be used. These curves are based on water at15OC and SG equal to 1.0.NPSH values are indicated on the performance curves.At least 0.5m should be added as a safety margin. Toovercome variations between actual and design systemrequirements it is recommended that the driver powerexceeds the absorbed pump shaft power.

Peripheral SpeedAfter determining the pump operating speed andchecking its maximum discharge pressure, the impellermaterial must be checked to ensure that it is suitablewith regards to its peripheral speed.Observing the following limits.

Drive PowerRating

Absorbed PumpShaft kW

Below 22 Approx. 125%

Approx 115%Approx 110%Above 55

Between 22 - 55

Cast IronBronze

Stainless Steel

up to 40m/secup to 60m/secup to 80m/sec

Impeller PeripheralMaterial Speed

H6C:Dedicated pattern equipment allows us to producecastings in steels where increased shrinkage occursduring casting. Stainless steel is often required for thefood industry or chemical process industry for hygienicand corrosive applications.

H9A:In the transfer of liquids that are used in the chemicalindustry, your IS pump may be required to handleliquids that are highly corrosive and kept at very hightemperatures. H9A will handle for example allconcentrations of H2SO4 at up to 50OC. H9A contains20% chromium and 30% nickel.

NI Resist:Reasonably inexpensive solution to handling seawaterand can also handle similar liquids with mildly corrosiveand erosive properties.

Materials of Construction

I.S. Type Series Booklet

6

Material Specifications and Options

● SG Iron - Grade 400-12,AS 1831 - 1985

● H6C - Austenitic Stainless Steel Grade H6C,AS 2074 - 1982, Equivalent 316 S/S

● H9A - Grade H9A, AS 2074 - 1982,Equivalent Durimet - 20

● Ni-Resist - Grade S - Ni Cr 20 - 2,AS 1833 - 1986

Material Limitations

Note: For operating pressures above 1600 kPa thefollowing is required:- special flanges- heavy duty oil lubricated bearings- special mechanical seal

03 04 05 06 07 08 O9 10 11A10B2 A10C2 A10D2 AX0B2 AX0C2 AX0D2 AXOJJ2 SX0KK2 SX0DD2

CASING S.G. IRON S.G. IRON N/A S.G. IRON S.G. IRON N/A H6C H9A NI-RESISTIMPELLER CAST IRON Z.F.BRONZE N/A CAST IRON Z.F.BRONZE N/A H6C H9A NI-RESIST

SHAFT 431 SS 431 SS N/A 431 SS 431 SS N/A 316 SS INCOLLOY 316 SSSHAFT SLEEVE N/A 316 SS 316 SS N/A 316 SS INCOLLOY 316 SSSPRING SLEEVE 316 SS 316 SS N/A N/A

SEAL M/SEAL M/SEAL N/A P/GLAND P/GLAND N/A P/GLAND P/GLAND P/GLAND

SGI

H6C

H9A

0

180-20 100 1400 20 60

400

2000

1600

1200

800

1000

NI - RESIST

Temperature OC

Casing Pressure kPa

Maximum operating pressure = pump shut off + suction pressure.

I.S. Type Series Booklet

7

Shaft Sealing Arrangement

Gland Packing● Fitted with removable stuffing box washer, lantern

ring and square plaited packing.● Gland is retained by two studs set at 45O to

centrelines.● Bearing Housing has a tapped hole for piping away

gland leakage.● Pump temperature: -20 to 100OC● Maximum suction pressure: 300 kPa to 700 kPa

(depending on pump mechanical element).● Restrictor bush can be fitted, reducing pressure on

the stuffing box and reducing gland leakage.● External flush recommended when pumping dirty

liquids.The external flush allows for the connectionof clean liquid to the stuffing box which reduceswear.

Mechanical Seal● Standard single mechanical seal has carbon vs.

ceramic faces, nitrile elastomers and 304 S/S metalcomponents.

● Flushing is adjacent to seal faces from highpressure region of casing.

● Standard seal operating temperature: -20OC to 90OC● Maximum suction pressure:800 kPa

4 5

600

700

800

900

100

500

400

300

200

1 2 3

Suction Pressure kPa

RESTRICTOR BUSH

STANDARD PACKED GLAND

MECHANICAL PUMP ELEMENT

M1 M2 M3 M4 M5

BALANCED Yes No No Yes Yes

SINGLE Yes Yes Yes Yes Yes

MATERIAL BQ1PGG BVVFF Q1Q1PFF

FACES carbon v carbon v silicon carbide v silicon carbide v silicon carbide v

silicon carbide ceramic silicon carbide silicon carbide carbon v

ELASTOMERS nitrile vitol nitrile nitrile ethylene propylene

METAL PARTS 316 SS or equal 304 SS or equal 304 SS or equal 316 SS or equal 316 SS or equal

M1 - Single acting balanced seal.M2 - High temperature seal.

Suitable for temperatures up to 105OC (for water).Suitable for some hydrocarbon based products(i.e. diesel fuel).

M3 - Seal with ‘hard faces’.Table shows the min. material requirementsused in this option, some sizes supplied withethylene propylene elastomers and 316 SS parts.

M4 - Balanced seal with ‘hard faces’. M4 seal is suitable for seawater application.

M5 - Cartridge seal. Single balanced cartridge sealwhich is ‘hook sleeve drive’.The design protects the pump bare shaft from thepumped medium.Suitable for temperatures up to 105OC (for water).

S1 - Cyclone separator, material nylon, c/w copperpiping.Max. allowable temperature 110OC.Max. operating pressure 1600 kPa (API Plan 31).

S2 - Seal/Gland flush for external source, internal flushis blocked.

S3 - Recirculation from pump casing through orifice toseal (API Plan 11).

● External mechanical seals can be provided foraggressive chemical applications.

● Double mechanical seals can be provided forabrasive, dangerous and toxic liquids.

Note: Auxilliary cooling may be required above 120OC.

Codes Description

Faces: B carbon

Q1 silicon carbide

V ceramic

Elastomers: E ethylene propylene

P nitrile

V viton

Material: GG 316 SS or equalFF 304 SS or equal

Seal Options are available to suit most applications.

I.S. Type Series Booklet

8

Technical Data

Moments of Inertia and Coupling Size(Jm) IN Kg.m2

Note: The value of Jmr listed is with a CAST IRON impeller.

For a BRONZE impeller multiply Jmr by 1.25.For a STAINLESS STEEL impeller multiply Jmr by 1.1.

Jm for a rotating assembly with coupling is found by adding the appropriate values.i.e. Jm = Jmr + Jm (coupling)

SC10 SC20 SC30 SC40 SC41 SC500.0050 0.0140 0.0440 0.1110 0.1100 0.2810

Spacer Coupling SizeJm

Bearing Selection

Grease Lubricated - Standard● Pump temperature: -20 to 120OC● Maximum suction pressure: 800 kPa● The bearing arrangement consists of double row

rear and single row front deep groove ball bearingslubricated by grease.

● Grease nipples are provided to enable regreasing atregular intervals.

Oil Lubricated - Option● Pump temperature: -20 to 180OC● Maximum suction pressure: 800 kPa● The bearing arrangement consists of double row

rear and single row front deep groove ball bearings● Constant level oiler is provided to ensure optimum

level is maintained.

Heavy Duty Oil Lubricated - Option● Pump temperature: -20 to 180OC● Maximum suction pressure: 1600 kPa● The bearing arrangement consists of double row

tapered ball rear bearing and roller front bearing.● Heavy duty bearing arrangement is recommended

for high suction pressure and for V-belt driveapplication.

Model Jmr Coupling Model Jmr Coupling Model Jmr Coupling032 - 125 0.0026 10 065 - 315 0.0945 30 125 - 200 0.0810 30032 - 160 0.0058 10 H065 - 315 0.0945 30 150 - 250 0.1080 40032 - 200 0.0157 10 080 - 200 0.0310 30 150 - 315 0.1830 40050 - 125 0.0031 10 080 - 250 0.0550 30 150 - 400 0.3280 40

050 - 160 0.0087 10 080 - 315 0.1260 30 150 - 500 0.8890 50040 - 200 0.0147 20 H080 - 315 0.1280 40 200 - 200 0.0990 40*040 - 250 0.0380 20 080 - 400 0.2760 30 200 - 250 0.1420 40065 - 125 0.0047 10 100 - 200 0.0320 30 200 - 315 0.1930 40

065 - 160 0.0099 20 100 - 250 0.0640 30 200 - 400 0.4350 50050 - 200 0.0158 20 100 - 315 0.1220 30 200 - 500 0.9090 50050 - 250 0.0323 20 H100 - 315 0.1250 40 250 - 200 0.1170 40*050 - 315 0.1180 30 100 - 400 0.2590 40 250 - 250 0.2510 40*

H050 - 315 0.1180 30 125 - 200 0.0430 30 250 - 315 0.3040 50080 - 125 0.0074 20 125 - 250 0.0700 30 250 - 400 0.5570 50080 - 160 0.0110 20 125 - 315 0.1740 40 300 - 200 0.6410 50065 - 200 0.0196 20 125 - 400 0.2400 40065 - 250 0.0441 30 125 - 500 0.5730 50

* Spacer Coupling Size 41

Technical Information - Impeller Details(Dimensions in mm)

I.S. Type Series Booklet

9

Pump Casing Diameter No. of Vane Max.Size Volume Max/Min Vanes Width Sphere

Size

Pump End Drive End Litres A B Nominal032 - 125 6304 3304 0.8 136 / 90 0.17 / 0.12 0.29 / 0.25 6 6 3.0032 - 160 6304 3304 1 166 / 136 0.17 / 0.12 0.29 / 0.25 6 7 3.0032 - 200 6304 3304 1 210 / 170 0.17 / 0.12 0.29 / 0.25 5 5.2 3.5050 - 125 6304 3304 1.2 136 / 106 0.17 / 0.12 0.29 / 0.25 6 12 3.5050 - 160 6304 3304 1.3 166 / 126 0.17 / 0.12 0.29 / 0.25 6 7.5 3.5

040 - 200 6306 3306 1.9 208 / 178 0.20 / 0.15 0.33 / 0.28 6 5 3.5040 - 250 6306 3306 1.8 262 / 222 0.20 / 0.15 0.33 / 0.28 5 7 5.5065 - 125 6304 3304 1.9 137 / 110 0.20 / 0.15 0.33 / 0.28 6 18 4.0065 - 160 6306 3306 2.3 173 / 133 0.20 / 0.15 0.33 / 0.28 6 13.5 5.0050 - 200 6306 3304 2.6 208 / 180 0.20 / 0.15 0.33 / 0.28 6 9 5.0

050 - 250 6306 3304 5.9 262 / 222 0.20 / 0.15 0.33 / 0.28 6 6 4.5050 - 315 6308 3308 5.8 330 / 270 0.20 / 0.15 0.33 / 0.28 8 10 7.5

H050 - 315 6308 3308 5.8 330 / 270 0.20 / 0.15 0.33 / 0.28 8 10 7.5080 - 125 6306 3306 3.1 148 / 94* 0.20 / 0.15 0.33 / 0.28 6 25.5 7.0080 - 160 6306 3306 3.3 173 / 145 0.20 / 0.15 0.33 / 0.28 6 21 5.5

065 - 200 6306 3306 3.4 210 / 170 0.20 / 0.15 0.33 / 0.28 6 16.5 6.0065 - 250 6308 3308 5.5 266 / 226 0.20 / 0.15 0.33 / 0.28 6 9.8 6.5065 - 315 6308 3308 5.7 330 / 270 0.20 / 0.15 0.33 / 0.28 6 7 5.5

H065 - 315 6308 3308 5.7 330 / 270 0.20 / 0.15 0.33 / 0.28 6 7 5.5080 - 200 6308 3308 5.4 218 / 178 0.23 / 0.18 0.36 / 0.30 6 20 7.5

080 - 250 6308 3308 6.1 268 / 218 0.23 / 0.18 0.36 / 0.30 6 13.8 8.0080 - 315 6308 3308 7.2 330 / 270 0.23 / 0.18 0.36 / 0.30 5 11 8.5

H080 - 315 NU308 3308 7.2 330 / 270 0.23 / 0.18 0.36 / 0.30 5 11 8.5080 - 400 6310 3310 9.2 410 / 350 0.23 / 0.18 0.36 / 0.30 6 7.7 6.0100 - 200 6308 3308 8.2 216 / 185 0.23 / 0.18 0.36 / 0.30 6 30 8.5

100 - 250 6308 3308 8.3 268 / 228 0.23 / 0.18 0.36 / 0.30 6 21 9.5100 - 315 6308 3308 9.5 328 / 270 0.23 / 0.18 0.36 / 0.30 6 14.7 9.5

H100 - 315 NU310 3310 9.5 328 / 270 0.23 / 0.18 0.36 / 0.30 6 14.7 9.5100 - 400 6310 3310 13 408 / 328 0.23 / 0.18 0.36 / 0.30 5 12.3 11.0125 - 200 6308 3308 10 219 / 170* 0.23 / 0.18 0.36 / 0.30 7 41 12.5

125 - 250 6308 3308 13 268 / 232 0.23 / 0.18 0.36 / 0.30 6 31 10.5125 - 315 6310 3310 13 338 / 278 0.23 / 0.18 0.36 / 0.30 6 20.2 11.0125 - 400 6310 3310 15 405 / 345 0.23 / 0.18 0.36 / 0.30 6 15 10.5125 - 500 6313 3313 22 510 / 450 0.23 / 0.18 0.36 / 0.30 6 10.5 9.0150 - 200 6308 3308 19 225 / 153* 0.27 / 0.20 0.39 / 0.33 6 54.5 11.5

150 - 250 6310 3310 18 278 / 238 0.27 / 0.20 0.39 / 0.33 6 40.5 13.0150 - 315 6310 3310 19 336 / 280 0.27 / 0.20 0.39 / 0.33 6 29.5 11.5150 - 400 6310 3310 21 410 / 335 0.27 / 0.20 0.39 / 0.33 6 23.2 12.0150 - 500 6313 3313 31 518 / 438 0.29 / 0.23 0.42 / 0.35 6 14 12.5200 - 200 6310 3310 32 235 / 155* 0.29 / 0.23 0.42 / 0.35 6 54 16.0

200 - 250 6310 3310 28 278 / 160* 0.29 / 0.23 0.42 / 0.35 6 59.5 13.0200 - 315 6310 3310 31 338 / 280 0.29 / 0.23 0.42 / 0.35 6 45 12.0200 - 400 6313 3313 31 420 / 340 0.29 / 0.23 0.42 / 0.35 6 30.2 13.0200 - 500 6313 3313 43 518 / 438 0.29 / 0.23 0.42 / 0.35 6 21.3 13.0250 - 200 6310 3310 55 239 / 180* 0.29 / 0.23 0.42 / 0.35 5 58.5 18.0

250 - 250 6310 3310 51 288 / 188* 0.32 / .025 0.45 / 0.38 6 64 18.0250 - 315 6313 3313 48 350 / 275* 0.32 / .025 0.45 / 0.38 6 60 17.0250 - 400 6313 3313 59 425 / 365 0.32 / .025 0.45 / 0.38 6 44 12.0300 - 200 6313 3313 105 352 / 290* 0.32 / .025 0.45 / 0.38 6 78.5 18.0

*Special angle**Nominal clearance for materials listed:

A - Cast IronB - Stainless Steel; Zinc Free Bronze; Ni-Resist

Radial Clearance**Nominal

Bearings

I.S. Type Series Booklet

10

Parts List

Packed Gland (AXO) Mechanical Seal (A1O)

1A Casing2A Impeller3A Back cover10 Bearing housing11 Bearing cover20 Shaft21 Impeller nut25 Slinger28.1 Key impeller28.2 Key coupling29 BearingA Plug

For Packed Gland (AXO)30 Gland31 Lantern ring32 Shaft sleeve

33 Stuffing box washer34 Gland packing

For Mechanical Seal (A10)35 Mechanical seal

Stationary faceRotating faceResilients

36 Spring sleeve40 Gasket casing*42.1 Ring, casing*42.2 Ring, back cover+42.3 Ring, impeller rear+42.4 Ring, impeller front73 Bearing housingbracket (optional)82.1 Plug, casing drain

82.2 Plug, flange85.1 Grease nipple90.1 Stud, casing90.2 Stud, back cover90.3 Stud, gland92 Capscrew, bearing

cover93 Setscrew, bracket

(optional)94.1 Nut, casing94.2 Nut, back cover94.3 Nut, gland94.4 Nut, bracket

(optional)

*Parts 42.1, 42.2 standard on 200 x 200 and larger, optional on smaller sizes.+Parts 42.3, 42.4 optional on sizes 200 x 150 and larger, not available for smaller sizes.

When ordering parts quote complete designation from nameplate followed by part number.

Dimensions(in mm)

I.S. Type Series Booklet

11

Suction

Discharge

Rotation

2 x dia. 15 holes

y *d1 l A B C032 - 125 1 50 32 80 290 112 140 50 100 70 190 140 14 M12 190 100 19 40 6 x 6 1/4 1/4 3/8 21032 - 160 1 50 32 80 290 132 160 50 100 70 240 190 14 M12 190 100 19 40 6 x 6 1/4 1/4 3/8 26032 - 200 1 50 32 80 290 160 180 50 100 70 240 190 14 M12 190 100 19 40 6 x 6 1/4 1/4 3/8 31

050 - 125 1 65 50 80 290 112 140 50 100 70 210 160 14 M12 190 100 19 40 6 x 6 1/4 1/4 3/8 25050 - 160 1 65 50 80 290 132 160 50 100 70 240 190 14 M12 190 100 19 40 6 x 6 1/4 1/4 3/8 27040 - 200 2 65 40 100 360 160 180 50 100 70 265 212 14 M12 235 100 24 47 8 x 7 1/4 1/4 3/8 40040 - 250 2 65 40 100 360 180 225 65 125 95 320 250 18 M12 235 100 24 47 8 x 7 1/4 1/4 3/8 53

065 - 125 1 80 65 100 290 132 160 50 100 70 240 190 14 M12 190 100 19 40 6 x 6 1/4 1/4 3/8 26065 - 160 2 80 65 100 360 160 180 50 100 70 265 212 14 M12 235 100 24 47 8 x 7 1/4 1/4 3/8 38050 - 200 2 80 50 100 360 160 200 50 100 70 265 212 14 M12 235 100 24 47 8 x 7 1/4 1/4 3/8 42050 - 250 2 80 50 100 360 180 225 65 125 95 320 250 18 M12 235 100 24 47 8 x 7 1/4 1/4 3/8 53050 - 315 3 80 50 125 470 225 280 65 125 95 345 280 18 M12 300 140 32 76 10 x 8 1/4 3/8 1/2 95

H050 - 315 3 80 50 125 470 225 280 65 125 95 345 280 18 M12 300 140 32 76 10 x 8 1/4 3/8 1/2 95

080 - 125 2 100 80 100 360 160 180 65 125 95 280 212 18 M12 235 100 24 47 8 x 7 1/4 1/4 3/8 42080 - 160 2 100 80 100 360 160 200 65 125 95 280 212 18 M12 235 100 24 47 8 x 7 1/4 1/4 3/8 43065 - 200 2 100 65 100 470 180 225 65 125 95 320 250 18 M12 235 100 24 47 8 x 7 1/4 1/4 3/8 49065 - 250 3 100 65 125 470 200 250 80 160 120 360 280 22 M16 300 140 32 76 10 x 8 1/4 3/8 1/2 77065 - 315 3 100 65 125 470 225 280 80 160 120 400 315 22 M16 300 140 32 76 10 x 8 1/4 3/8 1/2 98

H065 - 315 3 100 65 125 470 225 280 80 160 120 400 315 22 M16 300 140 32 76 10 x 8 1/4 3/8 1/2 98

080 - 200 3 125 80 125 470 180 250 65 125 95 345 280 18 M12 300 140 32 76 10 x 8 1/4 3/8 1/2 66080 - 250 3 125 80 125 470 200 280 80 160 120 400 315 22 M16 300 140 32 76 10 x 8 1/4 3/8 1/2 87080 - 315 3 125 80 125 470 250 315 80 160 120 400 315 22 M16 300 140 32 76 10 x 8 1/4 3/8 1/2 104

H080 - 315 4 125 80 125 550 250 315 80 160 120 400 315 22 M16 340 140 42 106 12 x 8 1/4 3/8 1/2 140080 - 400 3 125 80 125 550 280 355 80 160 120 435 355 22 M16 300 140 32 76 10 x 8 1/4 3/8 1/2 155

100 - 200 3 125 100 125 470 200 280 80 160 120 360 280 22 M16 300 140 32 76 10 x 8 1/4 3/8 1/2 72100 - 250 3 125 100 140 470 225 280 80 160 120 400 315 22 M16 300 140 32 76 10 x 8 1/4 3/8 1/2 82100 - 315 3 125 100 140 550 250 315 80 160 120 400 315 22 M16 300 140 32 76 10 x 8 1/4 3/8 1/2 110

H100 - 315 4 125 100 140 550 250 315 80 160 120 400 315 22 M16 340 140 42 105 12 x 8 1/4 3/8 1/2 188100 - 400 4 125 100 140 630 280 355 100 200 150 500 400 28 M20 340 140 42 106 12 x 8 1/4 1/2 1/2 155

125 - 200 3 150 125 140 500 225 280 80 160 120 400 315 22 M16 300 140 32 76 10 x 8 1/4 3/8 1/2 70125 - 250 3 150 125 140 550 250 355 80 160 120 400 315 22 M16 300 140 32 76 10 x 8 1/4 3/8 1/2 104125 - 315 4 150 125 140 550 280 355 100 200 150 500 400 28 M20 340 140 42 106 12 x 8 1/4 1/2 1/2 150125 - 400 4 150 125 140 630 315 400 100 200 150 500 400 28 M20 340 140 42 106 12 x 8 1/4 1/2 1/2 140125 - 500 5 150 125 160 630 355 450 120 250 180 620 500 35 M20 400 180 55 104 16 x 10 1/4 3/4 3/4 300

150 - 200 3 200 150 180 500 225 315 80 160 120 400 315 22 M16 330 140 32 76 10 x 8 1/4 3/8 1/2 130150 - 250 4 200 150 160 550 280 355 100 200 150 500 400 28 M20 340 140 42 106 12 x 8 1/4 1/2 1/2 150150 - 315 4 200 150 160 550 280 400 100 200 150 550 450 28 M20 340 140 42 106 12 x 8 1/4 1/2 1/2 170150 - 400 4 200 150 160 550 315 450 100 200 150 550 450 28 M20 340 140 42 106 12 x 8 1/4 1/2 1/2 195150 - 500 5 200 150 160 630 400 500 120 250 180 670 550 35 M20 400 180 55 104 16 x 10 1/4 3/4 3/4 350

200 - 200 4 200 200 200 600 280 355 100 200 150 500 400 28 M20 390 200 42 106 12 x 8 1/4 1/2 1/2 185200 - 250 4 200 200 180 550 280 400 100 200 150 550 450 28 M20 340 140 42 106 12 x 8 1/4 1/2 1/2 180200 - 315 4 200 200 180 550 315 450 100 200 150 550 450 28 M20 340 140 42 106 12 x 8 1/4 1/2 1/2 186200 - 400 5 200 200 180 630 355 450 120 250 180 620 500 35 M20 400 180 55 104 16 x 10 1/4 3/4 3/4 300200 - 500 5 200 200 180 630 400 500 120 250 180 670 550 35 M20 400 180 55 104 16 x 10 1/4 3/4 3/4 370

250 - 200 4 250 250 233 600 280 410 100 200 150 550 450 28 M20 390 200 42 106 12 x 8 3/8 1/2 1/2 220250 - 250 4 250 250 225 600 315 450 100 200 150 550 450 28 M20 390 200 42 106 12 x 8 3/8 1/2 1/2 300250 - 315 5 250 250 200 630 355 450 120 250 180 620 500 35 M20 400 180 55 104 16 x 10 3/8 3/4 3/4 370250 - 400 5 250 250 200 630 400 515 120 250 180 670 550 35 M20 400 180 55 104 16 x 10 3/8 3/4 3/4 400

300 - 200 5 300 300 250 700 400 510 120 250 180 670 550 35 M20 470 180 55 104 16 x 10 3/8 3/4 3/4 400

Pump Size

Ele

men

t No.

Pump Pump Feet

a f h1 h2 m2 n1Dis

char

ge

Suc

tion

Spa

cer

Sha

ft E

nd

Flange

b m1

*d1 tolerances : 19 = + .009 - 0.04; 24 = + .009 - .004; 32 = +.018, + .002; 42 = + .018, + .002; 55 = + .030, + .011

ConnectionsService

B.S.P.

Net

Wei

ght k

g

Cou

plin

g K

ey

h3n2 s1 w

2 4 h r s e r v i c eKSB support their products offering a 24 houremergency breakdown service: 1300 301 356

C o u n s e l l i n g a t s i t eWith the benefits of KSB being a global player wecan offer a comprehensive network of manufacturingsites and sales offices giving us a comprehensivedistribution network throughout the world assuringour customers that we offer on site advice.

C o m p e t e n c e a n d e x p e r i e n c eWith pumping experience over more than onecentury KSB has built up a strong knowledge baseand tradition in all pump manufacturing require-ments and with this rich 125 year experience hasdeveloped and linked the latest technologicalknow-how to their systems.

S e r v i c e a r o u n d t h e g l o b eKSB maintains service facilities in virtually everycountry around the globe. Contact your nearestAustralian office for international service contacts.

K S B p r o v i d e s w o r l d w i d e :

WEBSITE: www.ksbajax.com.au 24 HOUR EMERGENCY SERVICE LINE: 1300 301 356

Due to our policy of constant research and development, product specification may change without notice. Publication 2014 6/05 2K

AP

Victorian Head Office27 Indwe St,Tottenham, 3012Tel: +61 (03) 9314 0611Fax: +61 (03) 9314 7435ksbvicsales@ksbajax.com.au

New South WalesUnit 1, 28 Skinner Ave,Riverwood, 2210Tel: +61 (02) 9584 2099Fax: +61 (02) 9584 2111ksbnswsales@ksbajax.com.au

QueenslandCarberry St,Ebbw Vale, 4304Tel: +61 (07) 3282 1766Fax: +61 (07) 3816 0225ksbqldsales@ksbajax.com.au

South AustraliaUnit 4, 348 Richmond Rd,Netley, 5037Tel: +61 (08) 8234 0066Fax: +61 (08) 8443 5411ksbsasales@ksbajax.com.au

Western AustraliaUnit 2, 86 Catalano Circuit,Canning Vale, 6155Tel: +61 (08) 9455 7900Fax: +61 (08) 9455 7800ksbwasales@ksbajax.com.au

New ZealandUnit 2, 5 Civil Place,Albany, AucklandTel: +64 (09) 476 4047Fax: +64 (09) 476 4048pumps@ksbajax.co.nz

KSB Ajax Pumps Pty Ltd ABN: 29 006 414 642