iPRO Series - Sterowniki Dixell - DXL Sp. z o.o. (Dixell Can Protocol, not open) RS232 Config...
Transcript of iPRO Series - Sterowniki Dixell - DXL Sp. z o.o. (Dixell Can Protocol, not open) RS232 Config...
It is an hardware and software system, dedicated to regulate and
control a large number of applications
The main characteristic is that it can be programmed by people with
experienced in final application but not a specific experience in
programming
For Dixell, the Programmable Controller project has been designed
and developed as a new concept of configurable hardware, looking
at the same time to find the best environment to develop
applications
Introduction
iPro FAMILY
• Powerful Modular Platform
• High Flexibility/Expandibility
• High Connectivity
• Easy and Useful HMI
• Easy and Fast Programming Tools
Programmable Digital Controllers Applicable to:
REFRIGERATION – RETAIL – BMS – HVAC Markets
• CPU: ARM9 200Mhz – LINUX 2.6 Operating System
• 80 MB of free memory flash – 10 DIN format & IPL
4 MB of free memory flash – 4 DIN format
• 24 Vac-dc power-supply
• Up to 10 ANALOG INPUTs
• Up to 6 ANALOG OUTPUTs
• Up to 20 DIGITAL INPUTs
• Up to 15 DIGITAL OUTPUTs
The Analog Input and the Analog Output can be configured as Digital Input and
Digital Output.
Main Features
ISaGRAF® VISOPROG
iPro Hardware that control
the application
Visograph &
Visotouch User interace for the
applications
Visoprog Software to develop
the Visograph
& Visotouch
application
Web Server The integrated web
server lets the
development of a
custom website
Function Blocks
and Templates Dixell provide a lot of FB
usable for applications
ISaGRAF® Environment to develop
the iPro application
About Programmable Controller Structure
• IPG series
• IPC series
• IPR series
• IPL series
• IPX series
Programmable
version 10 or 4 DIN
rail
No application
inside
Chiller – Heat Pump
application Dixell application
Rack Controller
application Dixell application
Expansion Modules
10 or 4 DIN rail
Programmable
connectivity module
No application
inside
iPro RANGE
iPro RANGE
iPRO Programmable Controllers
iPro
GENIUS
IPG115D IPG215D
TF20D
DWB-30KIT
TF20D
IP-FC215CP
IP-FC215CT
IPC115D IPC315D IPC108D
IPC108E
TF20D
DWB-30KIT
TF20D
DWB-315KIT
IP-FC315
TF40D
DWS-30KIT
IP-FC108
USB-ETH-CONV
iPro
CHILL
Without
application
Black White
Bayonet
Screw
Black
With
chiller application
IPG315D
TF20D
DWB-315KIT
IP-FC315
IPG108D
IPG108E
TF40D
DWS-30KIT
IP-FC108
USB-ETH-CONV
IPG208D
IPG208E
TF40D
IP-FC208
USB-ETH-CONV
White
Disconnectable
Screw
Disconnectable
Screw
White Black Black Black
Bayonet
Screw
Disconnectable
Molex
Disconnectable
Screw
Disconnectable
Molex
Disconnectable
Molex
Black
Screw
IPL500D
TF20D
IP-FC500
iPro
LINK
Black
IPR215D
TF20D
IP-FC215CP
IP-FC215CT
iPro
RACK
Bayonet
Screw
Without
application
With rack
application
Black
Bayonet
Screw
TF40D
IP-FC208
USB-ETH-CONV
IPR208D
IPG100 & IPC100 (10 DIN)
IPG115D – IPC115D
Power supply 24Vac\dc from TF20D
Analogue inputs 10 x config (0÷1V - 0÷5V - 0÷10V - 0÷20mA - 4÷20mA - NTC - PTC - DI)
Digital inputs 20 x config (Potential free contacts - Opto-insulated)
Relay outputs 12 x5A + 3 x 8A
Analogue outputs 4 x config (0÷10V - ON\OFF - Not opto-insulated)
2 x config (0÷10V – 4÷20mA - ON\OFF - Non opto-insulated)
2 x PWM (for fan speed modules - Non opto-insulated)
Other outputs Remote keyboard (2 VGIPG/C)
RS485 MASTER
RS485 SLAVE
USB
ETHERNET
CANBus (Dixell Can Protocol, not open)
RS232 Config (optional)
Other functions Internal RTC
Logging memory (80M)
BACNet protocol (optional)
LON protocol with external device (optional)
IPG200 (10 DIN)
IPG215D
Power supply 24Vac\dc from TF20D
Analogue inputs 10 x config (0÷1V - 0÷5V - 0÷10V - 0÷20mA - 4÷20mA - NTC - PTC - DI)
Digital inputs 20 x config (Potential free contacts - Opto-insulated)
Relay outputs 15 x 5A
Analogue outputs 4 x config (0÷10V - ON\OFF - Not opto-insulated)
2 x config (0÷10V – 4÷20mA - ON\OFF - Non opto-insulated)
Other outputs Remote keyboard (2 VGIPG)
RS485 MASTER
RS485 SLAVE
USB
ETHERNET
CANBus (Dixell Can Protocol, not open)
RS232 Config (optional)
Other functions Internal RTC
Logging memory (80M)
BACNet protocol (optional)
LON protocol with external device (optional)
IPG300 & IPC300 (10 DIN)
IPG315D – IPC315D
Power supply 24Vac\dc from TF20D
Analogue inputs 10 x config (0÷1V - 0÷5V - 0÷10V - 0÷20mA - 4÷20mA - NTC - PTC - DI)
Digital inputs 20 x config (Potential free contacts - Opto-insulated)
Relay outputs 15 x 5A + 5 SSR
Analogue outputs 4 x config (0÷10V - ON\OFF - Not opto-insulated)
2 x config (0÷10V – 4÷20mA - ON\OFF - Non opto-insulated)
2 x PWM (for fan speed modules - Non opto-insulated)
Other outputs Remote keyboard (2 VGIPG/C)
RS485 MASTER
RS485 SLAVE
USB
ETHERNET
CANBus (Dixell Can Protocol, not open)
RS232 Config (optional)
Other functions Internal RTC
Logging memory (80M)
BACNet protocol (optional)
LON protocol with external device (optional)
IPG108D – IPG108E – IPG208D
IPG208E – IPC108D – IPC108E
Display Dual with icons on IPG108E, IPG208E, IPC108E
Power supply 24Vac\dc from TF40D
Analogue inputs 6 x config (0÷1V - 0÷5V - 0÷10V - 0÷20mA - 4÷20mA - NTC - PTC - DI)
Digital inputs 11 x config (Potential free contacts - Opto-insulated)
Relay outputs 8 x 5A
Analogue outputs 4 x config (0÷10V - ON\OFF - Not opto-insulated)
Other outputs Remote keyboard (VGIPG/C)
RS485 MASTER or LAN
RS485 SLAVE
USB
ETHERNET via USB-ETH-CONV
Other functions Internal RTC
Logging memory (80M)
BACNet protocol (optional)
LON protocol with external device (optional)
IPG100, IPG200 & IPC100 (4 DIN)
IPL500
IPL500D
Power supply 24Vac\dc from TF20D
Other outputs Remote keyboard (VGIPG/C)
RS485 MASTER or LAN
RS485 SLAVE
USB
CANBus (Dixell Can Protocol, not open)
ETHERNET
Other functions Internal RTC
Logging memory (80M)
BACNet protocol (optional)
LON protocol with external device (optional)
Internal GPRS modem (optional)
ETHERNET 10/100
• To connect PC and iPro
through ISaGRAF workbench you can download and debug the
application in your target (iPro)
• To connect more iPro
different applications on differents iPro exchanges variables
(Multimaster connection – no polling)
• To send mail and sms
you can program your iPro so it can sends mail/sms on time
or on demand
• Ethernet ModBUS Slave on TCP/IP
to download the map parameters through Wizmate
• To visit your own website
iPro Main Features
SERIAL BUS
• CAN-Bus (NOT CAN OPEN)
iPro is MASTER for a network of CAN devices made by Dixell
I/O expansion modules – electronic expansion valve drivers
• RS485 MASTER
iPro is the MASTER for a network of ModBUS RTU devices
(Dixell controllers and/or third party devices ModBUS RTU 485).
• RS485 SLAVE
To connect iPro to XWEB or standard ModBUS Scada
iPro reads/writes variables from/to these network
iPro Main Features
BUS RS485
(IPG-IPS-IPL series)
ETHERNET
(IPG-IPL series)
CAN BUS
(IPG-IPL series)
LAN
(IPS-IPL series)
Protocol
ModBUS RTU
(Master-Slave)
BacNet
ModBUS RTU TCP/IP
(Multi master)
BacNet
Dixell (no CAN open)
(Multi master)
Dixell
(Master-Slave)
External HW NO SWITCH NO NO
Devices
iPro
Dixell controllers
ModBUS devices
iPro
ModBUS TCP/IP
Devices
iPro
Expansion Module
Driver(XEV20D)
iPro
Expansion Module
Driver(XEV20D)
Number UP TO 100 NODES SWITCH INPUTS UP TO 4 NODES UP TO 4 NODES
Speed 9600-19200 bit/sec 100 Mbit 100 Kbit 19200 bit/sec
Max distance 1KM 50mt 400mt 100mt
Terminals MASTER for master
SLAVE for slave ETH CAN LAN
iPro Main Features
iPro Expansion/Driver
IPX106D Discon./Molex
TF10D
DWEX60-30KIT
(CANBUS + LAN)
IPX115/125D Discon./Molex
TF20D
DWX115-30KIT
DWEX70-30KIT
(CANBUS + LAN)
XEV20D TF20D ( 1 valve)
TF40D (2 valves)
DWXEV30
(CANBUS + LAN)
Expansion Module Driver for valve/s
4 DIN 10 DIN
Black White
IPX206D Bayonet/Screw
TF10D
IP-FCEX60
(CANBUS + LAN)
IPX306D Discon./Screw
TF10D
DWEX306-30KIT
(CANBUS + LAN)
IPX215/225D Bayonet/Screw
TF20D
IP-FCX215
IP-FCEX70
(CANBUS + LAN)
IPX315/325D Discon./Screw
TF20D
DWX315-30KIT/IP-FCX315
DWX325-30KIT/IP-FCX325
(CANBUS + LAN)
Black Black White Black Black
4 DIN
iPro Expansions & Driver
EXPANSION MODULE
IPX (4 DIN)
IPX106D IPX206D – IPX306D
Power supply 24Vac\dc from TF10D 24Vac\dc from TF10D
Analogue inputs 7 x config (0÷1V - 0÷5V - 0÷10V - 0÷20mA
- 4÷20mA - NTC - PTC - DI)
7 x config (0÷1V - 0÷5V - 0÷10V - 0÷20mA
- 4÷20mA - NTC - PTC - DI)
Digital inputs 3 x config (Potential free contacts - Opto-
insulated)
3 x config (Potential free contacts - Opto-
insulated)
Relay outputs 6 x 5A 5 x 5A + 1 x 8A
or
4 x 5A + 1 x 8A + 1 x SSR
Analogue outputs 3 x config (0÷10V - Not opto-insulated) 3 x config (0÷10V - Not opto-insulated)
Other outputs CANBus
LAN
CANBus
LAN
Other functions Dip switch for address set Dip switch for address set
EXPANSION MODULE
IPX100 (10 DIN)
IPX115D IPX125D
Power supply 24Vac\dc from TF20D 24Vac\dc from TF20D
Analogue inputs 10 x config (0÷1V - 0÷5V - 0÷10V -
0÷20mA - 4÷20mA - NTC - PTC - DI)
10 x config (0÷1V - 0÷5V - 0÷10V -
0÷20mA - 4÷20mA - NTC - PTC - DI)
Digital inputs 20 x config (Potential free contacts -
Opto-insulated)
20 x config (Potential free contacts -
Opto-insulated)
Relay outputs 12 x 5A + 3 x 8A 18 x 5A + 3 x 8A + 4 x SSR
Analogue outputs 4 x config (0÷10V - Not opto-insulated)
2 x config (0÷10V - 4÷20mA - ON\OFF
- Non opto-insulated)
4 x config (0÷10V - Not opto-insulated)
2 x config (0÷10V - 4÷20mA - ON\OFF
- Non opto-insulated)
Other outputs CANBus
LAN
CANBus
LAN
Other functions Dip switch for address set Dip switch for address set
EXPANSION MODULE
IPX200 (10 DIN)
IPX215D IPX225D
Power supply 24Vac\dc from TF20D 24Vac\dc from TF20D
Analogue inputs 10 x config (0÷1V - 0÷5V - 0÷10V -
0÷20mA - 4÷20mA - NTC - PTC - DI)
10 x config (0÷1V - 0÷5V - 0÷10V -
0÷20mA - 4÷20mA - NTC - PTC - DI)
Digital inputs 20 x config (Potential free contacts -
Opto-insulated)
20 x config (Potential free contacts -
Opto-insulated)
Relay outputs 15 x 5A 21 x 5A + 4 x SSR
Analogue outputs 4 x config (0÷10V - Not opto-insulated)
2 x config (0÷10V - 4÷20mA - ON\OFF
- Non opto-insulated)
4 x config (0÷10V - Not opto-insulated)
2 x config (0÷10V - 4÷20mA - ON\OFF
- Non opto-insulated)
Other outputs CANBus
LAN
CANBus
LAN
Other functions Dip switch for address set Dip switch for address set
EXPANSION MODULE
IPX300 (10 DIN)
IPX315D IPX325D
Power supply 24Vac\dc from TF20D 24Vac\dc from TF20D
Analogue inputs 10 x config (0÷1V - 0÷5V - 0÷10V -
0÷20mA - 4÷20mA - NTC - PTC - DI)
10 x config (0÷1V - 0÷5V - 0÷10V -
0÷20mA - 4÷20mA - NTC - PTC - DI)
Digital inputs 20 x config (Potential free contacts -
Opto-insulated)
20 x config (Potential free contacts -
Opto-insulated)
Relay outputs 15 x 5A
or
10 x 5A + 5 x SSR
21 x 5A + 4 x SSR
or
16 x 5A + 9 x SSR
Analogue outputs 4 x config (0÷10V - Not opto-insulated)
2 x config (0÷10V - 4÷20mA - ON\OFF
- Non opto-insulated)
4 x config (0÷10V - Not opto-insulated)
2 x config (0÷10V - 4÷20mA - ON\OFF
- Non opto-insulated)
Other outputs CANBus
LAN
CANBus
LAN
Other functions Dip switch for address set Dip switch for address set
ELECTRONIC EXPANSION VALVE MODULE
XEV20D
XEV20D
Power supply 24Vac\dc from TF20D for 1 valve or from TF40D for 2 valves
Probe inputs Pb1 - Pb2 (Pt1000 - NTC - PTC - DI)
Pb3 - Pb4 (0÷1V - 0÷5V - 0÷10V - 0÷20mA - 4÷20mA - Pt1000 - NTC - PTC - DI)
Valve number Up to 2
Relay outputs 8 x 5A
Other outputs CANBus
LAN
Other functions Dip switch for address set
VISOGRAPH
• GRAPICH LCD 240x96 pixel
• Processor: 32bit
• Multi-language
• Panel and wall mounting
• Industrial and commercial frame
• 8 full programmable keys
• 3 wires bus
• ASCII or UNICODE characters (different part number)
• Software updating from USB (through ISaGRAF® application)
VISOGRAPH
VISOGRAPH User Interface
VGIPC Wall/Panel mounting
Only for ASCII fonts
VGIPR Wall/Panel mounting
Only for ASCII fonts
Without application
For models
IPG108D, IPG108E, IPG208D,
IPG208E, IPG115D, IPG215D,
IPG315D, IPL500D
For models
IPC108D, IPC108E
IPC115D, IPC315D
VGIPG Wall/Panel mounting.
Different part number:
- for ASCII fonts
- for UNICODE fonts
With chiller application
For models
IPR208D, IPR215D
With rack application
• Display: 4,3’’ TFT color
• Resolution: 480x272 pixel
• Portrait and Landscape orientation
• Technology: resistive touch
• Panel and Wall mounting
• Alarm and Power front leds
• Temperature and Humidity sensors on board
• Processor: 32bit
• 100% compatible with Visograph connections
• Main project upload through USB stick
• Minor modifies on code can be uploaded through the iPro
VISOTOUCH
VTIPG
For all iPro models
Dimension Frontal (Panel Mounting) 134x93x4.5 mm
Dimension PCB 119x78x1.6 mm
Frontal IP (with UR/NTC sensor) IP20
Frontal IP (without UR/NTC sensor Panel mounting) IP54
Rear IP (Panel mounting) IP20
Power Supply 12Vdc (like visopraph 2.0)
24Vac
NTC (103AT 10kΩ@25°C) 1 on-board
1 remote
Measuring and Regulation Range NTC -10 to 50 C (on-board)
-50 to 110 C (remote)
Umidity probe (UR) 1 on-board
Measuring range Umidity 20 to 85%
Accuracy Umidity Sensor (SH71) +/-3% (20 to 80%)
+/-5% elsewhere
USB connector Rear (standard A type)
Buzzer yes
Operating Temperature -20 to 60 C
Storage Temperature -25 to 70 C
Relative Humidity 20 to 85%
VISOTOUCH