IPMPlus Premium User Guide...Page 3 of 18 © 2014 Vigyanlabs Innovations Private Limited Table of...

of 18© 2014 Vigyanlabs Innovations Private Limited

IPMPlus Premium User Guide


Version 1.0.4

The Software and Documentation contain proprietary information of Vigyanlabs Innovations PrivateLimited; they are provided under a license agreement containing restrictions on use and disclosure andalso protected by copyright, patent, and other intellectual and industrial property laws. Reverseengineering, disassembly or decompilation of the software is prohibited.

Documentation is licensed to use solely to support the deployment of the software and not for anyother purpose.

The information contained in this document is subject to change without notice. If you find anyproblems in the documentation, please report it in writing to [email protected] Innovations Private Limited does not warrant that this document is error free.

IPMPlusTM is a registered trademark of Vigyanlabs Innovations Private Limited. All other company orproduct names mentioned are used for identification purposes only and may be trademarks of theirrespective owners.


Table of Contents1. Introduction ...............................................................................................................................4

2. Download IPMPlusTM Premium ...................................................................................................5

3. Install IPMPlusTM Premium..........................................................................................................6

4. Activate IPMPlusTM Premium ......................................................................................................7

5. IPMPlusTM Premium Features......................................................................................................8

5.1 Power Saver .............................................................................................................................9

5.2 Device ON/OFF .......................................................................................................................11

5.3 Device Settings .......................................................................................................................12

5.4 Scheduler..........................................................................................................................14

5.5 Device info .............................................................................................................................16

5.6 Memory Cleaner.....................................................................................................................16

6 Other Information.........................................................................................................................17


1. Introduction

The onset of the digital economy has led to the rapid proliferation of mobile devices, suchas smartphones and tablets. These mobile devices run a variety of applications and are slowlyreplacing desktops and laptops as the digital productivity devices of the future.

Mobile devices are also now a fashion statement. It is extremely embarrassing to watchthe battery die in front of a group of people to whom we’re showing off a snippet of the latestNetflix drama like ‘House of Cards’. Similarly, charging the mobile device when we can use it forwatching a live feed of a T20 cricket match isn’t a productive use of the device. Yet, all thesedevices are power-hungry and often cause rapid battery drain. Intelligently managing the powerconsumption of these devices ensures longer charge time and increases the life of the battery.

IPMPlusTM for Android manages power consumption intelligently and maximizes thebattery life. It has been certified for all Android phones and has been shown to increase theinter-charge duration by up to 3 times.


2. Download IPMPlusTM Premium

Download IPMPlus Premium APK from http://www.ipmplus.com/android/ipmplusprem.apkas shown in the screenshot 1(a) below. The APK is about 1.4 MB in size and download time will depend

on your data plan, speed and capacity.

1(a) 1(b) 1(c)

Once the download completes, you will be prompted, as in screenshot 1(d) below, to ‘Open’ or ‘Dismiss’the window. ‘Open’ installs the software and ‘Dismiss’ saves the software on the ‘Downloads’ folder.Tap on ‘Open’ to start the installation process.

1(d)


3. Install IPMPlusTM PremiumTap on ‘Install’, as shown in screenshot 2(a) below, and IPMPlusTM Premium starts installing as shown inscreenshot 2(b) below.

2(a) 2(b) 2(c)After the installation is finished, as shown in screenshot 2(c) above, tap on ‘Open’ and a screen appearswith the installed software details (shown in 2(d) below). Tap on ‘OK’ and EULA appears as shown inscreenshot 2(e) below. You can read through the EULA and accept it by tapping on ‘I Agree’.

2(d) 2(e)


4. Activate IPMPlusTM PremiumTrial Version – Trial version of the software will be valid for 10 days. Please key in ‘First Name’,’ LastName’, E-Mail and ‘Phone Number’ and tap on ‘Activate’.

Commercial Version – Commercial Version of the software will have perpetual validity. Please key in the‘First Name’, ‘Last Name’, E-Mail, Phone Number and ‘License Key’ and tap on ‘Activate’.


5. IPMPlusTM Premium Features Power Saver Device ON/OFF Device Settings Scheduler Device Info Memory Cleaner


5.1 Power Saver

4.1(a)

DeepSleep Power Saver – You need to turn this on to reduce battery drain during idle state.

Active Power Saver – You need to turn this on to reduce battery drain during active state.

Flip to Sleep – You need to turn this on to set the device to sleep when the Flip is closed.

Note: Device goes to sleep mode only when the flip cover is in proximity to the proximity sensor formore than 3 seconds.


Manual Power Settings Min Power – Maximum power savings and low performance – see screenshot 4.1(d) below. Normal Power – Balanced speed and battery life, this will be the recommended profile for most

of the users – see screenshot 4.1(c) below. Max Power - Maximum performance, fast battery drain. This mode is recommended only when

user needs extra dose of speed – see screenshot 4.1(b) below.

View Battery Graph

On tapping ‘View Battery Graph’, as shown on screen 4.1(a) above, the following screen appears whichshows the complete battery information – days / hours / minutes the mobile is on battery.

4.1(b) 4.1(c) 4.1(d)


5.2 Device ON/OFFYou can use this option to selectively turn on/off various features.

The recommended option is to keep only the frequently used features on and turn off features whichare not used very often as this helps conserve battery power and the battery charge lasts much longer.

You can also select the ‘All ON’ button to turn on all the features or alternatively, the ‘All OFF’ button toturn off all the features with a single tap.

The ‘DISABLE POWERSAVER’ button turns off additional power savings and is turned on by default.

All the buttons in this screen are toggle buttons which can be used to turn on/off the specific feature.

4.2(a)


5.3 Device Settings

Device Settings provides additional options to increase power savings and enhance the battery life.The check boxes can be used to enable or disable the different features.

4.3(a)

Display Brightness - IPMPlusTM helps you set the brightness of the mobile screen (0% - 100%) as per yourrequirement. This directly helps user save battery life.

4.3(b)


Display Timeout – On mobile idleness, you can set the time in minutes after which the display screengoes off.

4.3(c)Application Settings

Enable Notification – When selected lets you know if IPMPlusTM is running on your device. The blueIPMPlusTM logo will be seen on the top left corner of the screen if ‘Enable Notification’ is set.Note: Power Saver should be enabled to set ‘Enable Notification’.Check for update – Checks for upgrades or newer versions of IPMPlusTM Premium.

4.3(d)


5.4 SchedulerThe Scheduler provides a convenient way to turn on/off features based on a pre-determined schedule,

e.g. turning off unwanted features at the end of the day and turning them on again at the beginning ofthe day. Turning off unwanted features at the end of the day saves power and keeps the battery goingfor much longer.

Scheduler helps you to create battery saving schedules to meet your needs. It allows you to apply powersavings mode based on configurable rules applied to specific time periods, e.g. toggle on the Wi-Finetwork during office hours or just fall back to disabling Wi-Fi.

Options include:

Wi-Fi – you can schedule Wi-Fi to be on during specific time range. Data Sync – you can schedule ‘Data Sync’ to be on during specific time range. Silent Mode – you can schedule ‘Silent Mode’. Airplane Mode (Android version 4.2 and below) – you can schedule Airplane mode to be on

during specified time range.


Wi-Fi and Data Sync

Airplane and Silent Mode

Airplane and Silent Mode

Turn ‘DataSync’ onevery day orfor a specificday betweenthe timerangesspecified

Turn Wi-Fion every dayor for aspecific daybetween thetime rangesspecified

Turn‘AirplaneMode’ onevery dayor for aspecific daybetweenthe timerangesspecified

Turn ‘SilentMode’ onevery day orfor a specificday betweenthe timerangesspecified


5.5 Device infoDevice Info displays the following information:

IPMPlus™ Premium Version – version number of the IPMPlus™ Premium application. Android OS Version – version number of Android OS. Device Information – device model and display resolution. CPU Information – name of processor and clock speed. Memory Information – total memory and memory available. Storage information – total size of storage on the SD card and free storage available

5.6 Memory CleanerYou can optimize your system memory by tapping on memory cleaner. All unused applications

running in the background will be stopped.


6 Other Information

Battery Information

When user taps on the battery icon on the home page (see screen 5.1 below), the complete batteryinformation for the device can be seen.

Level – Level of the battery charge. Temperature – Temperature of the battery in Celsius and Fahrenheit. Voltage – Voltage of the battery in Volts. Health – Shows the health of the battery, i.e. ‘Good’ – when in normal usage, ‘Cold’ – when

when in cold temperature, ‘Over-Heat’ – when battery is above permissible level oftemperature, ‘Over-Voltage’ – when battery is above permissible level of voltage, ‘Dead’ – whenbattery is dead and cannot be used again.

Status – shows ‘Battery Full’ when battery is 100% charged, ‘Battery Charging’ when device isconnected to the power supply for charging, ‘Battery Discharging’ when device is on battery andnot connected to the power supply.

5.1 5.2

Battery Information


About Vigyanlabs

For Product info – tap on ‘About’ on the home screen (screenshot 5.3). It displays the IPMPlusTM

Premium version details.

5.3 5.4

IPMPlus Premium User Guide...Page 3 of 18 © 2014 Vigyanlabs Innovations Private Limited Table of...

Documents

Transcript of IPMPlus Premium User Guide...Page 3 of 18 © 2014 Vigyanlabs Innovations Private Limited Table of...