AP 7.00

Integration

with

BRFplus

VERSION V1.00 – 22 APRIL 2011 - © SAP AG

2/20

Table of Contents

1. Introduction ..................................................................................................................................... 3

1.1 Time based prices .......................................................................................................................... 3

1.2 Usage of BRFplus .......................................................................................................................... 3

1.3 About this document ..................................................................................................................... 3

1.4 Target group .................................................................................................................................. 3

2. Solution via external data source .................................................................................................... 4

2.1 Timestamps ................................................................................................................................... 4

2.2 Set up of BRFplus ........................................................................................................................... 4

2.3 Condition type ............................................................................................................................... 7

2.4 Pricing procedure .......................................................................................................................... 7

2.5 BAdI PRC_DATA_SOURCES ............................................................................................................ 8

2.6 Result ........................................................................................................................................... 10

3. Solution with passing an additional attribute ............................................................................... 12

3.1 About this solution approach ...................................................................................................... 12

3.2 Set up of the customizing and master data ................................................................................ 12

3.3 Set up of BRFplus ......................................................................................................................... 15

3.4 BAdI CRM_COND_COM_BADI ..................................................................................................... 18

3.5 Result ........................................................................................................................................... 20

3/20

1. Introduction

1.1 Time based prices You are using the IPC Pricing Engine (for example in CRM for Sales Orders) and you want to support

business cases for which time based prices are required. Examples:

Happy Hour: The price of a product is 50 EUR, but between 14:00 and 16:00 it is only the half

price (25 EUR)

Time based rates, e.g. mobile phone tariffs:

o 0:00 - 7:00: 30 cents/min

o 7:00 - 18:00: 50 cents/min

o 18:00 - 0:00: 40 cents/min

Unfortunately, these scenarios are not supported within the IPC Pricing Engine. The reason is that the

condition technique (which is used by the IPC) allows only selecting condition records by day, but no

by time.

1.2 Usage of BRFplus For these special business requirements, you can use SAP BRFplus as an alternative to the condition

technique. The Business Rule Framework plus (BRFplus) is an ABAP based rule engine which allows to

create business rules. BRFplus offers an API (application programming interface) that allows to call

these business rules from external (e.g. local ABAP call or web service). So the IPC Pricing Engine can

use these business rules.

For more information regarding BRFplus, please refer to the official documentation, e.g. BRFplus

Knowledge Center in SAP Developer Network (SDN):

https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/90754865-f283-2b10-6d9f-

b10f3c28c3a0.

We would like to point out that BRFplus should not be a replacement for the condition technique but

can be an enhancement and alternative for special business requirements as the in two examples

above.

1.3 About this document The next chapters will show you how you can realize an integration between the IPC Pricing Engine

and BRFplus. These are two different solution approaches and we will use the examples of chapter

1.1 (Happy Hour and Time based rates).

1.4 Target group This document is mainly addressed to consultants and developers of the IPC area.

4/20

2. Solution via external data source

In this first solution approach, we want to implement the Happy Hour example via external data

source.

2.1 Timestamps As the condition technique supports selecting condition records only by date, the CRM passes to the

IPC the timestamps as dates.

So if you want to uses real timestamps (date with time), then you have to create them on your own.

You can create these timestamps by using the CRM BAdI’s like CRM_COND_COM_BADI. Or you can

create the timestamps in the BAdI PRC_DATA_SOURCES in method DETERMINE_ATTRIBUTES.

Here you can use for example the current system time with sy-uzeit (HH:MM:SS).

2.2 Set up of BRFplus

1) Open the BRFplus workbench with the transaction brfplus.

2) Create an application, e.g. ZBY_APPL_HAPPY_HOUR. An application is the top-level container

for all kinds of different BRFplus objects. All BRFplus objects are assigned to an application.

3) Add the required elements that are needed by the business rule. In our case it is:

Import:

Condition type (DDIC Element: PRCT_COND_TYPE)

Product Guid (DDIC Element: COMT_PRODUCT_GUID)

Time (DDIC Element: SYUZEIT)

Export:

Amount (BRFplus data type)

You need to define only the three import parameters. The export parameter Amount is

already available as BRFplus data type.

When creating the elements for the import parameters, then you can refer to the Data

Dictionary as shown in the screenshot below for COMT_PRODUCT_GUID.

5/20

This should look like this:

4) Add a BRFplus function with the proper interface, e.g. ZBYA_FUNC_TREE_HAPPY_HOUR. The

function is the interface between the application code (IPC) and the business rules.

6/20

5) Now we need to define our business rules. For a certain product the price should be 50 EUR

normally, but between 14:00 and 16:00 it should be only the half price (25 EUR). Here we use

a decision tree to realize this business rules, e.g. ZBYA_DEC_TREE_HAPPY_HOUR (see picture

below). After done this, please assign the decision tree to the function

ZBYA_FUNC_TREE_HAPPY_HOUR.

6) At the end you will have this setup in BRFplus:

7/20

For testing purpose, you can test your business rule by running a simulation of the function

ZBYA_FUNC_TREE_HAPPY_HOUR within the BRFplus workbench.

2.3 Condition type Now you need to create condition type with an external data source. This external data source will

call our BRFplus function.

Go to SPRO Customer Relationship Management Basic Functions Pricing Create Condition

Types.

In the screenshot below, an example is shown. The condition type ZHPY (Happy Hour) is a price

(condition class "B - Price").

Further, it uses the external data source "X - Customer Reserve 1". This is a filter for our BAdI

implementation that will call the BRFplus function. For more details regarding external data sources,

please refer to the SAP Note 1328953.

2.4 Pricing procedure Create a Pricing Procedure and add the condition type ZHPY.

Go to SPRO Customer Relationship Management Basic Functions Pricing Create Pricing

Procedure.

.

8/20

2.5 BAdI PRC_DATA_SOURCES Now you need to create a proper implementation for the BAdI PRC_DATA_SOURCES. The BAdI

PRC_DATA_SOURCES is used to retrieve a condition rate from another data source than the condition

technique. For more details regarding external data sources, please refer to the SAP Note 1328953.

Go to transaction SE18 and create a BAdI implementation for PRC_DATA_SOURCES:

Here we create the BAdI implementation ZBRF_PRC_DATA_SOURCE. You can see that this BAdI

implementation has the filter value 'X'. As the condition type ZHPY is using the external data source

"X - Customer Reserve 1", it will call this BAdI implementation.

For our example, we implement the BAdI method GET_DATA as shown at the next page. Here we call

our BRFplus function ZBYA_FUNC_TREE_HAPPY_HOUR and we pass here the condition type, the

product id and the time. For the time we just use the current system time. After the BRFplus call, we

assign the returned price and the currency to the condition record structure.

9/20

You will see that the BRFplus function ZBYA_FUNC_TREE_HAPPY_HOUR is called via an ID instead of

its name. In general, a BRFplus function can be called only by its ID. You can find this ID in the

"General" area of the function definition, see screenshot below.

method IF_EX_PRC_DATA_SOURCES~GET_DATA.

DATA: lo_factory TYPE REF TO IF_FDT_FACTORY,

lo_function TYPE REF TO if_fdt_function,

lo_context TYPE REF TO if_fdt_context,

lo_result TYPE REF TO if_fdt_result,

lx_fdt TYPE REF TO cx_fdt,

ls_cond_recs type prct_cond_recs,

ls_price TYPE if_fdt_types=>element_amount,

ls_attr_name_value type prct_attr_name_value,

ls_time type syuzeit.

FIELD-SYMBOLS: <ls_cond_list> type prct_cond_list,

<ls_message> TYPE if_fdt_types=>s_message.

* get data from name-value-table

read table is_item_wrk-item_attributes

with key attr_name = 'PRODUCT'

into ls_attr_name_value.

check: sy-subrc = 0.

* init BRFplus (function ZBYA_FUNC_HAPPY_HOUR has ID B7F17C4D0355592AE10000000A4286AD)

lo_factory = cl_fdt_factory=>if_fdt_factory~get_instance( ).

lo_function = lo_factory->get_function( iv_id = 'B7F17C4D0355592AE10000000A4286AD' ).

* get system time

ls_time = sy-uzeit.

loop at it_cond_list assigning <ls_cond_list>.

move-corresponding <ls_cond_list> to ls_cond_recs.

TRY.

* call BRFplus function ZBYA_FUNC_HAPPY_HOUR

lo_context = lo_function->get_process_context( ).

lo_context->set_value( iv_name = 'COND_TYPE' ia_value = ls_cond_recs-kschl ).

lo_context->set_value( iv_name = 'TIME' ia_value = ls_time ).

lo_context->set_value( iv_name = 'PRODUCT' ia_value = ls_attr_name_value-

attr_value ).

lo_function->process( EXPORTING io_context = lo_context

IMPORTING eo_result = lo_result ).

lo_result->get_value( IMPORTING ea_value = ls_price ).

CATCH cx_fdt INTO lx_fdt.

LOOP AT lx_fdt->mt_message ASSIGNING <ls_message>.

WRITE / <ls_message>-text.

ENDLOOP.

10/20

ENDTRY.

* assign returned price and currency to condition record structure

ls_cond_recs-kbetr = ls_price-number.

ls_cond_recs-konwa = ls_price-currency.

…

2.6 Result Now we can test our BRFplus integration. For this purpose, we create a pricing document (e.g. CRM

Sales Order) which is using our pricing procedure. Then we add the product for which we created the

BRFplus business rule for the happy hour price.

In the screenshot below, you can see the debugger and that the passed time is 9:42. In that case the

normal price 50 EUR is returned by BRFplus.

Now we call pricing again and modify in debugger the variable ls_time by adding a time between

14:00 and 16:00, for example 15:20.

11/20

In that case the happy hour price is returned: 25 EUR.

So our Happy Hour example and the BRFplus integration via external data source is working as

expected.

12/20

3. Solution with passing an additional attribute

3.1 About this solution approach This chapter wants to show you another solution approach as in the previous chapter. The main idea

here is that BRFplus pass an attribute value to the IPC depending on the time. This attribute value is

then used for the condition determination by the condition technique.

For this solution approach, we want to focus on the other example regarding mobile phone tariffs:

Time Costs Tariff

0:00 - 7:00 30 cents/min Tariff-1

7:00 - 18:00 50 cents/min Tariff-2

18:00 - 0:00 40 cents/min Tariff-3

The idea is here that BRFplus is returning the attribute TARIFF with the value 1, 2 or 3 (depending on

the time). This attribute TARIFF with its value is passed to the condition technique.

The corresponding conditions records could look like this:

KSCHL SALES ORG … TARIFF KBETR …

ZTAR SORG1 … 1 30 ..

ZTAR SORG1 … 2 50 …

ZTAR SORG1 … 3 40 …

For the integration between BRFplus and the calling application (e.g. CRM Order) you can use a BAdI,

e.g. CRM_COND_COM_BADI.

3.2 Set up of the customizing and master data 1) Go to the Data Dictionary (transaction SE11) and create new data element ZTARIFF or TARIFF

in the Data Dictionary (CHAR1):

13/20

2) Add a new field "TARIFF" to the field catalogue with the data type TARIFF:

Go to the field catalog: SPRO Customer Relationship Management Basic Functions

Pricing Maintain Field Catalog.

3) Create a new condition table with the standard key fields (e.g. sales organization) and add

the field TARIFF:

Go to SPRO Customer Relationship Management Basic Functions Pricing Create

Condition Tables.

4) Create an Access Sequence (e.g. 1MOT) with an Access using this condition table:

Go to SPRO Customer Relationship Management Basic Functions Pricing Create

Access Sequences.

14/20

5) Create a condition type (e.g. 1MOT) and assign the Access Sequence to it:

Go to SPRO Customer Relationship Management Basic Functions Pricing Create

Condition Types.

6) Create a Pricing Procedure (e.g. ZMOBT) and add the condition type to it:

Go to SPRO Customer Relationship Management Basic Functions Pricing Create

Pricing Procedure.

7) Before adding the condition records, we need to create a BAdI implementation for the new

data element TARIFF. Here we need an implementation for the BAdI /SAPCND/ROLLNAME.

This is BAdI for Field Checks, Default Values, Input Help, etc:

Go to SPRO Customer Relationship Management Master DataConditions and

Condition TechniqueCondition Technique: BasicsBAdI for Field Checks, Default Values,

Input Help, and so on.

Create an BAdI implementation for the data element TARIFF. Further add to methods

FIELD_CHECK, DEFAULT_VALUE_SUGGESTION and ATTRIBUTE_CONVERSION this minimum

implementation: * by default everything was ok e_was_executed = 'X'.

e_result = 0.

15/20

8) Now we can add the condition records. Call transaction /SAPCND/GCM and add three

condition records for our condition type with

Tariff 1: 30 cents /min

Tariff 2: 50 cents /min

Tariff 3: 40 cents /min

3.3 Set up of BRFplus 1) Open the BRFplus workbench with the transaction brfplus.

2) Create an application, e.g. ZAPPL_MOBILE_TARIFF. An application is the top-level container

for all kinds of different BRFplus objects. All BRFplus objects are assigned to an application

3) Add the required elements needed by the business rule. In our case it is:

TIME (DDIC Element: SYUZEIT )

TARIFF (DDIC Element: TARIFF)

4) Create the function ZBYA_FUNC_MOBILE_TARIFF:

Mode: Functional Mode

Import parameter: Element TIME

Export parameter: Element TARIFF

16/20

5) Create the decision table ZBYA_DEC_TAB_MOBILE_TARIFF and add the rules as shown

below.

6) Assign the decision table ZBYA_DEC_TAB_MOBILE_TARIFF to the function

ZBYA_FUNC_MOBILE_TARIFF.

17/20

At the end, you should have this setup in BRFplus:

For testing purpose, you can test your business rule by running a simulation of the function

ZBYA_FUNC_MOBILE_TARIFF within the BRFplus workbench.

For example if you enter the time 07:01, then the result will be Tariff 2:

18/20

3.4 BAdI CRM_COND_COM_BADI Until now we set up the pricing customizing as well as the condition records. Further we created in

BRFplus our business rule regarding the mobile tariff.

To bring this together we will create a implementation for BAdI CRM_COND_COM_BADI. This BAdI

implementation will call our BRFplus function which will return tariff with value "1", "2" or "3"

dependent on the time. This value will be added to the item attribute TARIFF that is passed to the IPC

Pricing Engine.

Add the following implementation to the method ITEM_NAME_VALUE:

method IF_EX_CRM_COND_COM_BADI~ITEM_NAME_VALUE.

DATA: ls_iten_name_value TYPE PRCT_ATTR_NAME_VALUE,

ls_iten_name_value_new TYPE PRCT_ATTR_NAME_VALUE,

ls_time type syuzeit,

lo_factory TYPE REF TO IF_FDT_FACTORY,

lo_function TYPE REF TO if_fdt_function,

lo_context TYPE REF TO if_fdt_context,

lo_result TYPE REF TO if_fdt_result,

lx_fdt TYPE REF TO cx_fdt,

ls_tariff TYPE TARIFF.

FIELD-SYMBOLS: <ls_message> TYPE if_fdt_types=>s_message.

* Get item attribute TARIFF

READ TABLE CT_ITEM_NAME_VALUE INTO ls_iten_name_value WITH KEY ATTR_NAME = 'TARIF

F'.

check: sy-subrc = 0.

ls_iten_name_value_new-ATTR_NAME = 'TARIFF'.

ls_iten_name_value_new-SEQ_NUMBER = ls_iten_name_value-SEQ_NUMBER.

* get system time

ls_time = sy-uzeit.

19/20

* Call BRFplus (function ZBYA_FUNC_MOBILE_TARIFF has ID 815BB24D7BE07167E10000000A4

286AF)

lo_factory = cl_fdt_factory=>if_fdt_factory~get_instance( ).

lo_function = lo_factory-

>get_function( iv_id = '815BB24D7BE07167E10000000A4286AF' ).

TRY.

lo_context = lo_function->get_process_context( ).

lo_context->set_value( iv_name = 'TIME' ia_value = ls_time ).

lo_function->process( EXPORTING io_context = lo_context

IMPORTING eo_result = lo_result ).

lo_result->get_value( IMPORTING ea_value = ls_tariff ).

CATCH cx_fdt INTO lx_fdt.

LOOP AT lx_fdt->mt_message ASSIGNING <ls_message>.

WRITE / <ls_message>-text.

ENDLOOP.

ENDTRY.

* Delete old attribute TARIFF and add new one with value from BRFplus

DELETE TABLE ct_item_name_value FROM ls_iten_name_value.

ls_iten_name_value_new-ATTR_VALUE = ls_tariff.

INSERT ls_iten_name_value_new INTO TABLE ct_item_name_value.

endmethod.

You can see that here the BRFplus function ZBYA_FUNC_MOBILE_TARIFF is called via an ID instead of

its name. In general, a BRFplus function can be called only by its ID. You can find this ID in the

"General" area of the function definition, see screenshot below.

20/20

3.5 Result

At the end you will have the example as shown in the screenshot below. When creating a pricing

document (e.g. CRM Sales Order), then your BAdI implementation ZMOBILE_TARIFF will be called

which calls BRFplus and receives a tariff id. This tariff id is passed to the IPC Pricing Engine for the

condition determination.

Enter Title Here: Do not exceed space provided - Title automatically appears in page header

SAP COMMUNITY NETWORK SDN - sdn.sap.com | BPX - bpx.sap.com | BOC - boc.sap.com | UAC - uac.sap.com

© 2011 SAP AG

Copyright

© Copyright 2011 SAP AG. All rights reserved.

No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP AG. The information contained herein may be changed without prior notice.

Some software products marketed by SAP AG and its distributors contain proprietary software components of other software vendors.

Microsoft, Windows, Excel, Outlook, and PowerPoint are registered trademarks of Microsoft Corporation.

IBM, DB2, DB2 Universal Database, System i, System i5, System p, System p5, System x, System z, System z10, System z9, z10, z9, iSeries, pSeries, xSeries, zSeries, eServer, z/VM, z/OS, i5/OS, S/390, OS/390, OS/400, AS/400, S/390 Parallel Enterprise Server, PowerVM, Power Architecture, POWER6+, POWER6, POWER5+, POWER5, POWER, OpenPower, PowerPC, BatchPipes, BladeCenter, System Storage, GPFS, HACMP, RETAIN, DB2 Connect, RACF, Redbooks, OS/2, Parallel Sysplex, MVS/ESA, AIX, Intelligent Miner, WebSphere, Netfinity, Tivoli and Informix are trademarks or registered trademarks of IBM Corporation.

Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.

Adobe, the Adobe logo, Acrobat, PostScript, and Reader are either trademarks or registered trademarks of Adobe Systems Incorporated in the United States and/or other countries.

Oracle is a registered trademark of Oracle Corporation.

UNIX, X/Open, OSF/1, and Motif are registered trademarks of the Open Group.

Citrix, ICA, Program Neighborhood, MetaFrame, WinFrame, VideoFrame, and MultiWin are trademarks or registered trademarks of Citrix Systems, Inc.

HTML, XML, XHTML and W3C are trademarks or registered trademarks of W3C®, World Wide Web Consortium, Massachusetts Institute of Technology.

Java is a registered trademark of Sun Microsystems, Inc.

JavaScript is a registered trademark of Sun Microsystems, Inc., used under license for technology invented and implemented by Netscape.

SAP, R/3, SAP NetWeaver, Duet, PartnerEdge, ByDesign, SAP Business ByDesign, and other SAP products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP AG in Germany and other countries.

Business Objects and the Business Objects logo, BusinessObjects, Crystal Reports, Crystal Decisions, Web Intelligence, Xcelsius, and other Business Objects products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of Business Objects S.A. in the United States and in other countries. Business Objects is an SAP company.

All other product and service names mentioned are the trademarks of their respective companies. Data contained in this document serves informational purposes only. National product specifications may vary.

These materials are subject to change without notice. These materials are provided by SAP AG and its affiliated companies ("SAP Group") for informational purposes only, without representation or warranty of any kind, and SAP Group shall not be liable for errors or omissions with respect to the materials. The only warranties for SAP Group products and services are those that are set forth in the express warranty statements accompanying such products and services, if any. Nothing herein should be construed as constituting an additional warranty.