ion 2.2 is assembly ons rev - teenage.engineering
Transcript of ion 2.2 is assembly ons rev - teenage.engineering
!
com
pu
ter−
1 as
sem
bly
inst
ruct
ion
s re
visi
on
2.2
B
C
N
B
I
J
A
G
LK
gpu only
break!
3 mm
1
4
5
2
3
!
please read through these instructions before assembly. visit teenage.engineering for recommended components.
F “PC-1” silicone plug G black paper mask H metal handles X2 I silicone feet J plastic nut K audio out L power switch M usb-c cable N pin header cables
think twice, bend once!
back plate and bend the gpu support 90° attach SFX power supply with fan facing down. (use power supply vendor screws).
make all bends on bottom plate and attach silicone feet (I)
attach switch (L) to front panel. put black paper mask (G) on switch. attach audio (K) to front panel. optional: replace metal nut with orange plastic nut (J).
connect audio and switch to motherboard using pin header cables (N). see motherboard user guide for pinout diagram.
attach back plate to left plate (A). if io-shield is used, attach shield to back plate.
connect power cables, mount ram, cpu and cooler on motherboard. attach motherboard to left side (B, C)1
3 4 5
6 7 8
2 attach case fan cable to motherboardstep-by-stepassembly
X3
X8
X4
do not overtighten screws
C (X4)
B (X15)
D (X4) E (X5)
A (X20)
rip apart! connect later at
spare
led audio
13