Invisible Jacob's Ladder

10
8/14/2019 Invisible Jacob's Ladder http://slidepdf.com/reader/full/invisible-jacobs-ladder 1/10 Invisible Jacob's Ladder By Gabby Veith ([email protected]) Supplies: 6 pieces of 3X6 lightweight cardstock (or 1 level 2 B&T paper cut as described below) 3 pieces of 1X14 thin (but sturdy) clear plastic table cloth cover or plastic bag (like the ones that bed sheets come in) you can find it at Wal-Mart or fabric store. Coordinating color cardstock Stamps of your choice Various “flat” embellishments Sticky tape and Tacky glue I used 1 level 2 More to Adore Page (from bulk) and cut it as follow: You will end up with six 3X6 cards to decorate. Decorate only one side of each of these cardstock pieces. Make sure that they are decorated before you put the project together.

Transcript of Invisible Jacob's Ladder

Page 1: Invisible Jacob's Ladder

8/14/2019 Invisible Jacob's Ladder

http://slidepdf.com/reader/full/invisible-jacobs-ladder 1/10

Invisible Jacob's Ladder 

By Gabby Veith ([email protected]

Supplies:

• 6 pieces of 3X6 lightweight cardstock (or 1 level 2 B&T paper cut as described below)

• 3 pieces of 1X14 thin (but sturdy) clear plastic table cloth cover or plastic bag (like the ones that bed

sheets come in) you can find it at Wal-Mart or fabric store.

• Coordinating color cardstock 

• Stamps of your choice

• Various “flat” embellishments

• Sticky tape and Tacky glue

I used 1 level 2 More to Adore Page (from bulk) and cut it as follow:

You will end up with six 3X6 cards to decorate. Decorate only one side of each of these cardstock pieces.Make sure that they are decorated before you put the project together.

Page 2: Invisible Jacob's Ladder

8/14/2019 Invisible Jacob's Ladder

http://slidepdf.com/reader/full/invisible-jacobs-ladder 2/10

 Decide which card you want to be the front and label it piece #1 (on the backside). Likewise, decide which

piece you want to be your back and label it piece #6. Put in a number from 2-5 on the rest of the cards.

If you would like to do the same as me, here are the dimensions:

Here are the steps to take:

STEP 1

Take "piece #2", placing it face down and apply plastic strips as follows: 1 strip (tail end facing to the left) to

left side of the card, gluing to middle portion of the card and 2 strips (tail ends facing to the right) glued to

right side, approx 1/8" from top and bottom of card. See photos for help here:

Page 3: Invisible Jacob's Ladder

8/14/2019 Invisible Jacob's Ladder

http://slidepdf.com/reader/full/invisible-jacobs-ladder 3/10

 

STEP 2

Glue the “piece #1" (face up) over top of "piece #2". Piece #1 will be glued to Piece #2.

Page 4: Invisible Jacob's Ladder

8/14/2019 Invisible Jacob's Ladder

http://slidepdf.com/reader/full/invisible-jacobs-ladder 4/10

 

STEP 3

Flip over the pieces so that "piece #1" is face down now & strips are now on opposite sides. (2 are to the left

and 1 (middle) is on the right)

Page 5: Invisible Jacob's Ladder

8/14/2019 Invisible Jacob's Ladder

http://slidepdf.com/reader/full/invisible-jacobs-ladder 5/10

STEP 4

Take "piece #3" and place it face down to the right hand side of first card section, leaving at least an

1/8"space between the cards, over middle plastic strip.

STEP 5

Fold the two (upper and lower) plastic strips from the left side over to right side and glue them down onto the"piece #3".

Page 6: Invisible Jacob's Ladder

8/14/2019 Invisible Jacob's Ladder

http://slidepdf.com/reader/full/invisible-jacobs-ladder 6/10

STEP 6

Pull the middle plastic strip out from the space between the two cards and fold it over to the left.

STEP 7

Place "piece #4" face down, over left hand card pieces, over the three plastic strips.

Page 7: Invisible Jacob's Ladder

8/14/2019 Invisible Jacob's Ladder

http://slidepdf.com/reader/full/invisible-jacobs-ladder 7/10

STEP 8

Wrap left middle plastic strip over to the right hand side, gluing it over "piece #4" and tucking it in under the

right "piece #3".

Page 8: Invisible Jacob's Ladder

8/14/2019 Invisible Jacob's Ladder

http://slidepdf.com/reader/full/invisible-jacobs-ladder 8/10

STEP 9

Apply glue to "piece #4" (on left) & flip over onto the right "piece #3". “Piece #4 & Piece #3 will now be

glued together.

STEP 10

Take "piece #5" and lay it to right hand side of other card pieces face up. It will be on top of both top andbottom plastic while the middle plastic piece will be pulled over piece #5. Glue the middle plastic strip

down onto the piece #5, cutting off any excess.

PLEASE NOTE: The picture is incorrect. The piece that says Front #5 should say Back #5.

Page 9: Invisible Jacob's Ladder

8/14/2019 Invisible Jacob's Ladder

http://slidepdf.com/reader/full/invisible-jacobs-ladder 9/10

STEP 11

Wrap top and bottom plastic strips over card "piece #5" to the left, cutting off excess and gluing these onto

the piece #5 as well.

PLEASE NOTE: The picture is incorrect. The piece that says Front #5 should say Back #5.  

STEP 12

Take last “piece #6" and glue right side up over the back of "piece #5". Piece #5 and Piece #6 will be glued

together now.

Page 10: Invisible Jacob's Ladder

8/14/2019 Invisible Jacob's Ladder

http://slidepdf.com/reader/full/invisible-jacobs-ladder 10/10

Congratulations you are now you are finished!!