Invisibility

~ order out of chaos ~

HomeArticlesLinksAboutContactProducts

The following text is a combination of two separate files on Invisibility.

This file was originally posted on the KeelyNet BBS on November 6,1990 asINVISI1.ASC. Contributed by Chuck Henderson on August 5 and 7, 1990.

This article was taken from 'Flying Saucers on the Attack' by Harold T. Wilkins in1954, additional copyright 1967 by Citadel Press.

Invisibility Achieved??

As one has noted, in both London and NY, attempts have been made, as in the 30's,to produce invisibility by warping light rays in an electromagnetic field.

In 1934 in London, there was demonstrated in a public hall apparatus which wasperhaps suggested by the fantasy of the late H.G. Wells' "The Invisible Man."

A young scientist wearing what he called an Electro-Helmet and a special Mantlewent into a cabinet open at the front before a brilliantly lit stage and with bothhands touched contact gloves which were over his head.

An electric current was switched on and the man's body gradually vanished fromfeet to head!

One could step up and touch him but could not see him.

Nor did the camera reveal the secret for it depicted only what the eye saw.

The inventor refused to reveal his secret which he said was the work of many yearsof experiments.

All one could see was the development of a cone of light such as might be projectedbetween the two poles of a powerful transmitter.

This cone persisted even when the man could not be seen.

The inventor had succeeded in doing on stage in public what a dematerializingapparition is alleged to do in a haunted house.

Whether he developed the powers of some new or previously discovered ray andcreated an opaque screen I am unable to say.

Vanguard Notes about INVISI1.ASC....>>>

As many of us recognize, this smacks of the Philadelphia Experiment which used afluctuating magnetic field to cause either invisibility or teleportation.

There is some phenomenon definitely related to extremely high density magneticfields which causes space and time to warp.

The fluctuation of the field seems to resonantly couple with the influenced mass tocause it to lose its "grip" in our space and/or time. If not at one or more of themass resonances, then some "fabric resonance" which causes a distortionregardless of the mass resonances.

One of our papers on gravity gives a circuit which might relate to this anecdote. Ibelieve the file is GRAVITY6.ASC or .ZIP.

In addition, the papers BIELEK1 and PHILAD1 might be of use since they cover thePhiladelphia Experiment and some interesting comments by Al Bielek on some kindof time lock.

This file was originally posted on the KeelyNet BBS on November 25, 1990 asINVISI2.ASC. The principal portions of this file are courtesy of Elbert Cook.

Invisibility http://www.keelynet.com/unclass/invisi.htm

1 di 5 14/01/2016 0.02

Invisibility Techniqueswritten by

Jerry W. Decker - Sysop/KeelyNet

While discussing a variety of subjects with a friend last week, we broached thetopic of invisibility. He said he had a paper which showed a photograph of a batwhich had been immersed in a fluid to cause the tissues to become transparent.

The photograph was a photocopy and showed the skeleton of a bat as seen throughthe now clear tissues.

The formula for this fluid is :

1 part - Benzyl Benzoate 3 parts - Salicylic Methyl Ester

-------------------------------------------------------------------- My chemical dictionary shows the following : --------------------------------------------------------------------

*** Benzyl Benzoate ***

Water-white liquid which freezes readily, supercools easily

Sharp, burning taste with a faint aromatic odor

Insoluble in water and glycerin

Soluble in alcohol, chloroform and ether

Combustible

Low toxicity

Refractive Index : 1.568-1.569 at 20 degrees Celsius

Uses : Fixative and solvent for musk in perfumes and flavors External medicine Plasticizer (an organic compound added to a high polymer to facilitate processing and to increase the flexibility and toughness of the final product by internal modification (solvation) of the polymer molecule, i.e. a softener) Miticide (kills mites, small animals of the spider class)

-------------------------------------------------------------------- I could find no listing for Salicylic Methyl Ester as a compound so we must relegate to the properties of the components --------------------------------------------------------------------

Salicylic (not found as a standalone chemical)

--------------------------------------------------------------------

Salicin

Colorless crystals or white powder

a glucoside (modern term glycoside) abundantly occurring organic compound in plants, which can be resolved by hydrolysis into sugar and other organic substances and specifically having glucose as its sugar constituent

Non-toxic

Soluble in water, alcohol, alkalies, glaciel acetic acid Insoluble in ether

Uses : Medicine As a reagent for nitric acid

--------------------------------------------------------------------

Salicyl Alcohol

White crystals

Pungent taste

Soluble in water, especially alcohol, chloroform, ether, cold water, hot water

Combustible

Non-toxic

Uses : Medicine (antipyretic and tonic) Local anesthetic

--------------------------------------------------------------------

Salicylaldehyde

Colorless, oily liquid or dark red oil

Bitter almond-like odor

Burning taste


2 di 5 14/01/2016 0.02

Soluble in alcohol, ether and benzene, only slightly so in water

Combustible

Low Toxicity

Uses : Analytical chemistry Perfumery (violet) Synthesis of coumarin (deodorizing and odor-enhancing agent) Gasoline additive Auxiliary fumigant

--------------------------------------------------------------------

Salycylamide

White or slightly pink crystals

Soluble in hot water, alcohol, ether, chloroform and slightly so in cold water, naptha, and carbon tetrachloride

Low Toxicity

Uses : Medicine as an analgesic

--------------------------------------------------------------------

Salicylic Acid

White powder

Acrid taste

Stable in air but gradually discolored by light

Soluble in acetone, oil of turpentine, alcohol, ether, benzene and slightly so in water

Combustible

Low Toxicity

Uses : Manufacture of aspirin and salicylates, resins Prevulcanization inhibitor Fungicide

--------------------------------------------------------------------

Methyl Ester

Any of a group of fatty esters derived from coconut and other vegetable oils, tallows, etc.

Uses : As lubricants for metal-cutting fluids High-temperature grinding Cold-rolling of steel

-------------------------------------------------------------------- To induce Invisibility in matter, we can use any of three techniques to accomplish that end. They are listed in order of probability. --------------------------------------------------------------------

1) Bending light around the object so that it cannot contact the object and thus reflect back to the viewer

This principle takes advantage of the Refractive Index of a mass. All matter either reflects, diffuses or transmits light (indeed all radiation) to varying degrees based on its Refractive Index.

Refraction refers specifically to the change in direction of radiation, especially light, or sound frequencies as it passes obliquely from one medium to another medium resulting in a different propagation velocity.

This change in the velocity (speed and direction) of the wave causes a corresponding change in the effective wavelength, thus the frequency of the radiation changes WHILE MOVING WITHIN THE MEDIUM.

The degree of change is thus the Refractive Index.

The Refractive Index is the phase velocity of radiation if free space is divided by the phase velocity of the same radiation in a specified medium.

The absolute index for all ordinary transparent substances is greater than 1, but there are some special cases (X-rays and light in metal films) for which the index of refraction is less than unity (1).

The absolute index for air exceeds unity by less than 0.0003, the relative indices for solids and liquids in air are very nearly equal to their absolute indices.

The Refractive Index VARIES WITH WAVELENGTH. Because of this, the wavelength of Sodium light is used at 5.893 Angstroms.

Air - 1.0002926 Carbon Dioxide - 1.00045 Ice - 1.31 Water - 1.333........at 20 degrees Celsius Glycerine - 1.4729


3 di 5 14/01/2016 0.02

Rock Salt - 1.516 Glass - 1.5 to 1.9 Diamond - 2.419

Now, if a means of "bending" all incoming visible wavelengths around an object, it would become invisible. The movie "Predator" takes this approach in the cloaking device which the alien wears. It could take the form of a fiber optic mesh or an electronic banding effect.

If a high field density magnetic field is used, it would produce life altering effects on both the operator and the environment.

A chemical is possible like that used in the movie "the Invisible Man". Hopefully the effect would be non-toxic and wear off as the body eliminated the sudden concentration over time.

Gravity waves might cause such an effect if they could be successfully harnessed.

As of now, we know of no light-bending technique which has worked. It is always possible that some researcher or group of researchers has achieved this and is keeping it quiet.

--------------------------------------------------------------------

2) Shifting to a higher form of energy which cannot be seen by the viewer because of its being emitted by the test object

There is mention of a technique in one of the UFO related books. It involves the stimulation of a mass to a frequency in either the IR, UV or higher frequencies.

There are several interesting points when looking at it from this angle.

UltraViolet (UV) light sucks heat from the body while InfraRed (IR) light projects heat into the body.

If all visible light reflected from an object could be stepped up to a doubling or a harmonic outside the bounds of the visible spectrum (this could be either Ultra or Infra), then the object would appear as a black hole in the shape of the object.

If IR was used, then the object would give off heat. If UV was used, people in the presence of the operator would experience burns and conjunctivitis (burning, reddening and swelling of the eyes).

Many UFO close encounters have as a physical side effect, the burning of the skin and eye swelling. This indicates a high proportion of UV or other higher radiation.

To cause the body to emit frequencies beyond the visible spectrum, one could use a super-heterodyne effect or some form of doubling or tripling.

Crystals could be used for achieving the doubling. While super- heterodyning would be accomplished by the blending of two or more frequencies to generate both the sum and difference frequencies.

I don't see how this technique could work if the sole result is to delineate a black human shape. The invisibility would be defeated since the object would be so obvious, if not totally conspicuous.

There is the possibility that there are principles of light which we don't completely understand.

This could be especially true at UV, IR and other unseen frequencies.

For that reason, this possible technique should be looked into.

--------------------------------------------------------------------

3) Dimensional shifting of the object itself

If the object could be so "excited" as to translate to a higher dimension or level of being, then it would effectively not be respondent to radiations, including light, from this dimension.

From experiments we have heard of, this doesn't appear to be true.

One case which we can only give in a very abbreviated form at the request of our source, involved certain experiments using high density fluctuating magnetic fields.

A device was built in the shape of a split-phase coil with many turns of wire.

When the subject sat astraddle the coil and the power was applied, at certain frequencies and magnetic field densities, the subject saw the room slowly vanish to be displaced by other scenery.

Further experiments caused the subject and the coil to begin to VANISH FROM THE TEST AREA. (kind of reminds you of the Philadelphia Experiment, HUH?)

The subject obviously "translated" to a higher dimension both visually and physically.

Now, this might not be the rule for all such experiments. There is of course, much work to be done using different frequencies, combinations of such and field densities.


4 di 5 14/01/2016 0.02

It might be possible to cause a "vanishing" without losing the physical form.

One of the communications given to UFO contact Billy Meier stated that the Pleidians used a time shifting technique. This allowed them to vanish and reappear in another location almost instantly.

They said time could be divided into many separate and distinct moments, each of which could house an entire Universe CO-EXISTENT with ours, yet TOTALLY UNKNOWN AND SUSPECTED BY US.

Perhaps this theory explains how UFO's, Bigfoot, Loch Ness and other anomalies occur in our reality. They are simply momentarily "displaced" entities from another dimension.

It would follow that phase conjugate techniques could be used to energize an area to a level of very high field density. If something walked into that field as it "scanned" another dimension, it could be "charged" to forcibly drag it into our dimension.

When this occurs, the being is disturbed and confused by this seemingly "magical" accident.

As time progressed, the energy charge would fade away and the entity would reach the quantum level necessary to cause the return to their home dimension.

--------------------------------------------------------------------

We hear many stories and some experiments which in many cases we are forbidden to pass on in their entirety.

Part of the reason is trust coupled with a desire to have a sounding board leading to other approaches. Another reason is that someone else might know in the event of catastrophe.

Although we cannot always spell out the details, many of the files on KeelyNet are laced with annotated information.

We are most appreciative of everyone who shares with us and others.

Not only does it increase our understanding and perspective of our reality, but through it, we can hopefully help others to understand.

Of course, application is everything. So, BUILD, TEST, REFINE, PASS IT AROUND!

Thank you for your patience and support of KeelyNet and Vanguard Sciences. --------------------------------------------------------------------

Popular Pages

Home

Quick Links

HomeArticlesLinksAboutContactProducts

Â© 2016 keelynet.com - All rights reserved.

Privacy Policy


5 di 5 14/01/2016 0.02

Invisibility

Documents

Transcript of Invisibility