InView Message Display Specifications - Rockwell...

Technical Data

InView Message Display SpecificationsCatalog Numbers 2706-P22R, 2706-P92C, 2706-P94C, 2706-P42R, 2706-P42C, 2706-P44R, 2706-P44C, 2706-P72CN1, 2706-P72CN2, 2706-P74CN1, 2706-P74CN2

Topic Page

InView Message Displays 2

Environmental Specifications 2

Certifications 3

Technical Specifications 4

Product Selection 5

Communication Modules 6

Accessories 7

InView Messaging Software 8

Cables 8

Additional Resources 12

InView Message Display Specifications

InView Message Displays

InView message displays are panel-mount and large-format displays for visually communicating information across the factory floor. Whether its process alarming, safety messages, inventory data, process data, or thanking the team, InView displays can deliver the information to the right place when needed. Choose from eleven different models offering varying display lines, character sizes, message colors, font types, and messaging effects.

You can integrate the message displays into an existing industrial or commercial networks using communication modules and preferred Rockwell Automation controllers, third party controllers, or computer-based systems.

Environmental Specifications

Table 1 lists the environmental specifications for the InView Message Displays.

Table 1 - Environmental Specifications - InView Message Displays

Attribute 2706-P22R, 2706-P92C, 2706-P94C, 2706-P42R, 2706-P42C, 2706-P44R, 2706-P44C, 2706-P72CN1, 2706-P72CN2, 2706-P74CN1, 2706-P74CN2

Temperature, operating 050 C (32122 F) 2706-P22R: 055 C (32131 F)

Temperature, nonoperating -2570 C (-13158 F)

Relative humidity 5...95% noncondensing

Vibration 2706-P22R: 2 g

Shock, operating 2706-P22R: 15 g

Shock, nonoperating 2706-P22R: 30 g

Enclosure ratings2706-P22R

2706-P42R, 2706-P42C, 2706-P44R, 2706-P44C

2706-P72CN1(1), 2706-P72CN2 (1)

2706-P74CN1, 2706-P74CN2

P92C, 2706-P94C

(1) The cat. no. 2706-P72CN1 and 2706-P74CN1 displays have stainless steel enclosures. The NEMA Type 4X rating applies only to these enclosures.

NEMA Type 4 (indoor only) NEMA Type 12

NEMA Type 4, 4X (indoor only)

NEMA Type 12, 13

2 Rockwell Automation Publication 2706-TD007B-EN-P - September 2013


Certifications

Tables 2 and 3 lists certifications for the InView Message Displays.

Table 2 - Environmental Specifications - InView Message Displays

Certification(1)

(1) When marked. Click the Product Certifications link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.

2706-P22R, 2706-P92C, 2706-P94C

c-UL-s UL Listed Industrial Control Equipment, certified for US and Canada UL listed for UL508-Industrial Control Products UL listed for UL1604-Hazardous Environments:

Class 1, Division 2, Groups A, B, C, and D; Class II(2), Division 2, Groups F and G; and Class III(2), Division 2

UL Listed for Canadian Safety Standards CSA 22.2 No. 14, No. 213 and C22.2 No. 142

(2) Cat. nos. 2706-P92C and 2706-P94x are not certified for Class II or Class III rating.

CE European Union 89/336/EEC EMC Directive, compliant with: EN 61000-6-2; Industrial Immunity EN 50081-2; Industrial Emissions IEC 1131-2; Programmable Controllers - Equipment Class 1

C-Tick Australian Radiocommunications Act, compliant with: AS/NZS 2064 - Group 1, Class 1

Table 3 - Certifications - InView Message Displays, Cat Nos. 2706-P42x, 2706-P44x, 2706-P72x, 2706-P74x

Certification(1)

(1) When marked. Click the Product Certifications link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.

2706-P42R, 2706-P42C, 2706-P44R, 2706-P44C, 2706-P72CN1, 2706-P72CN2, 2706-P74CN1, 2706-P74CN2

ETL Approved

CE European Union 89/336/EEC EMC Directive, compliant with: EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 61131-2; Programmable Controllers

Rockwell Automation Publication 2706-TD007B-EN-P - September 2013 3

http://ab.rockwellautomation.com/http://ab.rockwellautomation.com/


Technical SpecificationsTable 4 lists the technical specifications for the InView Message Displays.

Table 4 - Technical Specifications - InView Message Displays

Message DisplayAttribute

2706-P22R 2706-P42R, 2706-P42C(1)

2706-P44R, 2706-P44C(2)

(1) Display is available in short format 91.44 cm (3 ft).

(2) Display is available in long format 182.88 m (6 ft enclosure).

2706-P72CN1, 2706-P72CN2(1)

2706-P74CN1, 2706-P74CN2(2)2706-P92C (1)

2706-P94C(2)

Viewing distance 7.6 m (25 ft) 60 m (200 ft) 100 m (350 ft) 137 m (450 ft)

Display Type Red LED matrix Red LED matrix orTricolor LED matrix

Tricolor LED matrix Tricolor LED matrix

Display area (WxH) 30 x 5 cm (12 x 2 in) 2706-P42R, 2706-P42C(1)

91.4 x 12.2 cm (36 x 4.8 in)2706-P44R, 2706-P44C(2)

183 x 12.2 cm (72 x 4.8 in)

2706-P42R, 2706-P42C(1)

91.4 x 18.3 cm (36 x 7.2 in)2706-P44R, 2706-P44C(2)

152.4 x 18.3 cm (60 x 7.2 in)

2706-P42R, 2706-P42C(1)

91.4 x 24.4 cm (36 x 9.6 in)2706-P44R, 2706-P44C(2)

183 x 24.4 cm (72 x 9.6 in)

Pixel array 120 x 70 120 x 16 or 240 x 16 120 x 24 or 200 x 24 120 x 32 or 240 x 32

Pixel spacing (center-to-center) 2.54 mm (0.1 in) 7.62 mm (0.3 in) 7.62 mm (0.3 in) 7.62 mm (0.3 in)

Number of lines 2 1 or 2 14 15

Characters per line 20 2706-P42R, 2706-P42C(1) 1 line: 12 2 line: 202706-P44R, 2706-P44C(2) 1 line: 24 2 line: 40

2706-P72CN1, 2706-P72CN2(1) 1 line: 12 2 or 3 line: 20 4 line: 242706-P74CN1, 2706-P74CN2(2) 1 line: 20 2 or 3 line: 33 4 line: 40

2706-P92C(1) 1, 2, or 3 line: 13 4 line: 20 5 line: 242706-P94C (2) 1, 2, or 3 line: 26 4 line: 40 5 line: 48

Character size 1.8 cm (0.7 in) 1 line: 12.2 cm (4.8 in)2 line: 5.3 cm (2.1 in)

1 line: 18.3 cm (7.2 in)2 line: 7.6 cm (3.0 in)3 line: 5.3 cm (2.1 in)4 line: 3.8 cm (1.5 in)

1 line: 24.4 cm (9.6 in)2 line: 11.4 cm (4.5 in)3 line: 7.6 cm (3.0 in)4 line: 5.3 cm (2.1 in)5 line: 3.8 cm (1.5 in)

Character set Standard and Extended ASCII Standard and extended ASCIIUser-defined graphic characters

Software Cat. no. 2706-PSW1 PC-based, InView Messaging software

Communication ports RS-232 serial port supports point-to-point communication from a single controller to a single InView display within a distance of 50 ft.RS-485 serial port supports multidrop communication from a single controller to multiple InView displays using an AIC+ module.

Input Voltage, DC 1830V DC, 0.5 A at 18V DC

Input Voltage, AC 100240V AC, 5060 Hz

Weight, approx. 0.85 kg (1.87 lb) 2706-P42R, 2706-P42C12.7 kg (28 lb)2706-P44R, 2706-P44C22.7 kg (50 lb)

2706-P72CN1, 2706-P72CN227.2 kg (60 lb)2706-P74CN1, 2706-P74CN236.3 kg (80 lb)

2706-P92C32 kg (70 lb)2706-P94C 64 kg (140 lb)

Dimensions, approx., (HxWxD) 6 x 36 x 11 cm(2.41 x 14.40 x 4.38 in.)

2706-P42R, 2706-P42C(1)

14 x 103 x 20 cm(5.50 x 40.38 x 7.88 in.)

2706-P44R, 2706-P44C(2)

14 x 194 x 20 cm(5.50 x 76.38 x 7.88 in.)

2706-P72CN1, 2706-P72CN2(1)

15 x 107 x 35 cm(6.0 x 42.25 x 13.75 in.)

2706-P74CN1, 2706-P74CN2(2)

15 x 168 x 35 cm(6.0 x 66.25 x 13.75 in.)

2706-P92C(1)

40 x 105 x 13 cm(15.90 x 41.19 x 5.25 in.)

2706-P94C(2)

40 x 196 x 13 cm(15.90 x 77.20 x 5.25 in.)

Optional Communication modules

Communication type Remote I/O, DH-485, DH+, DeviceNet, ControlNet, Ethernet

Mounting method DIN rail Back-mounted on display Inside display Inside display

Power source External 24V DC From display From display From display

Series A or later C or later C or later C or later



Product Selection

Table 5 list the catalog numbers for the InView Message displays.

Table 5 - Catalog Numbers - InView Message Displays

Cat. No.Display LEDs Viewing

DistanceNumber of Lines

Characters Per Line NEMAType

PowerRed Tri-color Number Height: in. (cm)

2706-P22R 7.6 m(25 ft)2 20 0.7 (1.8) 4 (1)

(1) NEMA Type rating applies when display is panel-mounted.

DC

2706-P42R

60 m(200 ft)

1 or 2 12 or 20 4.8 or 2.1 (12.2 or 5.3) 12 AC

2706-P42C 1 or 2 12 or 20 4.8 or 2.1 (12.2 or 5.3) 12 AC

2706-P44R 1 or 2 24 or 40 4.8 or 2.1 (12.2 or 5.3) 12 AC

2706-P44C 1 or 2 24 or 40 4.8 or 2.1 (12.2 or 5.3) 12 AC

2706-P72CN2

100 m(350 ft)

14 1224 7.21.5 (18.33.8) 4 AC

2706-P72CN1 14 1224 7.21.5 (18.33.8) 4X (2)

(2) Has stainless steel enclosure.

AC

2706-P74CN2 14 2040 7.21.5 (18.33.8) 4 AC

2706-P74CN1 14 2040 7.21.5 (18.33.8) 4X (2) AC

2706-P92C 137 m(450 ft)

15 1324 9.61.5 (24.43.8) 12, 13 AC

2706-P94C 15 2648 9.61.5 (24.43.8) 12, 13 AC



Communication Modules

InView message displays come standard with RS-232 and RS-485 communication ports. For applications requiring industrial or commercial networks, use InView communication modules to integrate your display into new and existing networks.

Table 6 - InView Display Communication Modules

Cat. No. Communication For Message Display Mounting Method

2706-PENETP

EtherNet/IP

2706-P22R, 24V DC DIN rail

2706-PENETM 2706-P4x Back of display

2706-PENETK 2706-P7x2706-P9x Inside display

2706-PENET1(1) (2)

(1) Rockwell Automation recommends using a third-party DIN-rail mounted Ethernet TCP/IP solution with the cat. no. 2706-P22R panel mount display. Lantronix and Digi both supply a DIN-rail Ethernet TCP/IP solution for connecting to a personal computer.

(2) The cat. no. 2706-P9x displays come standard with Ethernet TCP/IP, RS-232, and RS-485 communication.

Ethernet TCP/IP2706-P4x Back of display

2706-P7x Panel mounted

2706-PDNETP

DeviceNet

2706-P22R DIN rail(3)

(3) DIN-rail mounted modules operate on 24V DC power.

2706-PDNETM 2706-P4x Back of display

2706-PDNETK 2706-P7x2706-P9x Inside display

2706-PCNETP

ControlNet

2706-P22R DIN rail(3)

2706-PCNETM 2706-P4x Back of display

2706-PCNETK 2706-P7x2706-P9x Inside display

2706-PDH485P

DH-485

2706-P22R DIN rail (3)

2706-PDH485M 2706-P4x Back of display

2706-PDH485K 2706-P7x2706-P9x Inside display

2706-PDHPP

DH+


2706-PDHPM 2706-P4x Back of display

2706-PDHPK 2706-P7x2706-P9x Inside display

2706-PRIOP

Remote I/O


2706-PRIOM 2706-P4x Back of display

2706-PRIOK 2706-P7x2706-P9x Inside display



Accessories

The tables describe the adapter plate and interface modules used by the InView message displays.

Table 7 - Environmental Specifications - InView Display Communication Modules

Attribute 2706-PxxxxP, 2706-PxxxxM, 2706-PxxxxK

Temperature, operating -055 C (32131 F)

Temperature, storage -2570 C (-13158 F)

Relative humidity 5...95% noncondensing

Shock, operating 15 g

Shock, nonoperating 30 g

Vibration - channel mount 10 Hz


InView Messaging Software

Develop messages on a computer by using the InView Messaging software, catalog number 2706-PSW1, a Microsoft Windows software package with WYSIWYG functionality. By using this simple configuration environment, you can quickly set up your communication network and create messages with varying attributes:

Message colors Font size and format Embedded process variables Message attributes

Cables

This table lists cables used by the InView Message displays.

Table 11 - InView Messaging Software

Cat. No. Description

2706-PSW1 InView Messaging software with ActiveX controls

Table 12 - Cables

Cat. No. Description Length

2706-PCABLE1 InView message display program and download cable

1747-C10 DH-485 operating/programming cable 1.8 m (6 ft)

1747-C11 DH-485 operating/programming cable .3 m (1 ft)

1747-C20 DH-485 operating/programming cable 6 m (20 ft)

2711-NC13 RS-232 operating/programming cable, 9-pin D-shell to 9-pin D-shell 5 m (16.4 ft)

2711-NC14 RS-232 operating/programming cable, 9-pin D-shell to 9-pin D-shell 10 m (32.7 ft)

2711-NC21 RS-232 operating cable, 9-pin D-shell to 8-pin mini DIN 5 m (16.4 ft)

2711-NC22 RS-232 operating cable, 9-pin D-shell to 8-pin mini DIN 15 m (49 ft)

2706-NC13 RS-232 operating/programming cable, 9-pin D-shell to 9-pin D-shell 3 m (10 ft)



Runtime Communication Cables

The tables provide a summary of connections between InView message displays and controllers or interface modules for runtime communication.

Table 13 - Runtime Communication Cables: InView Message Displays to SLC Controllers

Protocol InView Display Portor Comm Module Port

SLC-500, 5/01, 5/02CH1 RJ45 (DH-485)

SLC-5/03, 5/04, 5/05CH0 (9-pin RS-232)

(DH-485)

SLC 5/03CH1 (RJ45)(DH-485)

SLC 5/04CH1 (DH+)

SLC 5/05CH1 (ENET)

RS-232 serial point-to-point(any)

RS-232 portInView Display

RS-485 serial multidrop(any)

RS-485 port (terminal block)InView Display

Use AIC+ module(1761-NET-AIC)

Connect to port 3Daisy chain to other InView

displays

DH-485 DH-485 (RJ45) portCommunication module2706-PDH485x

1747-C10 (2 m/6 ft)1747-C20 (6 m/20 ft)


Connect to port 3

1747-C10 (2 m/6 ft)1747-C20 (6 m/20 ft)

DeviceNet DeviceNet portCommunication module2706-PDNETx

To SLC 5/02 with 1747-SDN

and DeviceNet cable

Use 1747-SDN moduleand DeviceNet cable




ControlNet ControlNet portCommunication module2706-PCNETx

InView Message Displays do not support SLC ControlNet configurations.

EtherNet/IP EtherNet/IP portCommunication module2706-PENETx

1585J-M type cable or 2711P- CBL-EX04

(4 m/14 ft) (1)

(1) A direct connection from an InView EtherNet/IP communication module to an SLC 5/05 requires an Ethernet switch or the 2711P-CBL-EX04 crossover cable.

Remote I/O Remote I/O portCommunication module2706-PRIOx

SLC 5/02 onlyUse 1747-SN

with shielded twinaxial cable (1770-CD)

Use 1747-SN scannerwith shielded twinaxial cable (1770-CD)

DH+ Remote I/O portCommunication module2706-PDHPx

Shielded twinaxial cable (1770-CD)



Table 14 - Runtime Communication Cables: InView Message Displays to PLC and Logix Controllers

Protocol InView Display Portor Comm Module PortPLC-5, PLC-5C, PLC-5ECH0 (25-pin RS-232)

(DF1)

ControlLogixCH0 (9-pin RS-232)

(DF1)

CompactLogixCH0 (9-pin RS-232)

(DF1 or DH-485)



2711-NC13 (5 m/16 ft)2711-NC14 (10 m/32 ft)

Use 9-pin to 25-pin adapter

2711-NC13 (5 m/16 ft)2711-NC14 (10 m/32 ft)

2711-NC13 (5 m/16 ft)2711-NC14 (10 m/32 ft)




Connect to port 3Daisy chain to other InView displays




Connect to port 3


Use AIC+ module

(1761-NET-AIC)Connect to port 3



Use 1756-DNB Module with DeviceNet cable

Use 1761-NET-DNI moduleand DeviceNet cable


To PLC-5C withControlNet cable

Use 1756-CNB Module with ControlNet cable


To PLC-5/E with 1585J-M type cable or

2711P- CBL-EX04 (4 m/14 ft)(1)

(1) The AIC+ module is recommended for isolation purposes when the InView display and controller are not on same power supply.

Use 1756-ENET module with1585J-M type cable or

2711P- CBL-EX04 (4 m/14 ft)(1)Use 1761-NET-ENI module

and Ethernet cable


Shielded twinaxial cable (1770-CD) Use 1756-DHRIO module

withshielded twinaxial cable (1770-CD)


Shielded twinaxial cable (1770-CD)Use 1756-DHRIO module

withshielded twinaxial cable (1770-CD)



Table 15 - Runtime Communication Cables: InView Message Displays to MicroLogix Controllers

Protocol InView Display Portor Comm Module PortMicroLogix 1000, 1100, 1200, 1400, 1500LSP

CH0 (8-pin Mini DIN)(DF1 or DH-485)

MicroLogix 1400, 1500LRPCH1/CH2 (9-pin RS-232)

(DF1 or DH-485)MicroLogix 1100, 1400 Ethernet



1747-NC21 (5 m/16 ft)1747-NC22 (15 m/49 ft)Null modem required (1)

(1) The AIC+ module is recommended for isolation purposes when the InView display and controller are not on same power supply.

2711-NC13 (5 m/16 ft)2711-NC14 (10 m/32 ft)






Connect to port 3



Connect to port 3


Connect to port 3






Use 1761-NET-ENI moduleand EtherNet cable

Use 1761-NET-ENI moduleand EtherNet cable

1585J-M Type Cable or 2711P- CBL-EX04 (4 m/14 ft) (2)

(2) A direct connection from an InView EtherNet/IP communication module to an SLC 5/05 requires an Ethernet switch or the 2711P-CBL-EX04 crossover cable.



Table 16 - Runtime Communications Cables: InView Message Displays to Interface Modules

Protocol InView Display Portor Comm Module Port 1747-AIC1761-NET-AIC

Port 1 (9-pin)

Port 2(8-pin Mini DIN)

Port 3(DH-485)

1761-NETDNI1771-NET-ENI




1747-C10 (2 m/6ft)1747-C20 (6 m/20 ft)

1761-CBL-AS03 (3 m/10 ft)1761-CBL-AS09 (9 m/30 ft)



Additional Resources

These documents contain additional information concerning related products from Rockwell Automation.

You can view or download publications at http://www.rockwellautomation.com/literature/. To order paper copies of technical documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales representative.

Resource Description

2706-94x and 2706-97x Message Display Installation Instructions, publication 2706-IN006 Provides instructions on how to change the serial address and install the 2706-94x and 2706-97x InView message displays in NEMA enclosures.

2706-P92C and 2706-P94C Message Display Installation Instructions, publication 2706-IN016

Provides instructions on how to mount, connect, and set the switch settings on the 2706-P2Cx and 2706-P4Cx InView message displays.

InView Marquee Message Display Quick Start, publication 2706-QS001 Provides instructions on to configure and download messages to an InView displays and configure the display for Ethernet communication.

InView Marquee Message Display User Manual, publication 2706-UM016 Provides instructions in how to install, configure, and set up serial communication for the InView displays.

InView Communication Module Installation Instructions, publication 2706-IN015 Provides information on how to connect communication modules to the InView displays.

InView Communication Module User Manual, publication 2706-UM017 Provides information on how to wire, configure, and troubleshoot the InView communication modules.

Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Provides general guidelines for installing a Rockwell Automation industrial system.

Product Certifications website, http://www.ab.com Provides declarations of conformity, certificates, and other certification details.


http://literature.rockwellautomation.com/idc/groups/literature/documents/in/2706-in006_-mu-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/in/2706-in016_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/in/2706-in016_-en-p.pdfhttp://www.rockwellautomation.com/literature/http://www.literature.rockwellautomation.com/idc/groups/literature/documents/in/1770-in041_-en-p.pdfhttp://www.ab.comhttp://literature.rockwellautomation.com/idc/groups/literature/documents/qs/2711c-qs001_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/qs/2706-qs001_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/in/2711c-in001_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/um/2706-um016_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/um/2711c-um001_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/in/2706-in015_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/um/2711c-um001_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/in/2706-in015_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/um/2706-um017_-en-p.pdf


Notes:


Allen-Bradley, ControlLogix, CompactLogix, DH+, InView, MicroLogix, PLC-5, SLC, Rockwell Software, Rockwell Automation, and LISTEN. THINK. SOLVE are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Publication 2706-TD007B-EN-P - September 2013 Supersedes Publication 2706-TD007A-EN-P - August 2010 Copyright 2013 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.

Important User Information

Read this document and the documents listed in the additional resources section about installation, configuration, and operation of this equipment before you install, configure, operate, or maintain this product. Users are required to familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws, and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to be carried out by suitably trained personnel in accordance with applicable code of practice.

If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is prohibited.

Documentation Feedback

Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete this form, publication RA-DU002, available at http://www.rockwellautomation.com/literature/.

Rockwell Otomasyon Ticaret A.., Kar Plaza Merkezi E Blok Kat:6 34752 erenky, stanbul, Tel: +90 (216) 5698400

http://literature.rockwellautomation.com/idc/groups/literature/documents/du/ra-du002_-en-e.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/du/ra-du002_-en-e.pdfhttp://www.rockwellautomation.com/literature/

2706-TD007B-EN-P, InView Message Display SpecificationsInView Message DisplaysEnvironmental SpecificationsCertificationsTechnical SpecificationsProduct SelectionCommunication ModulesAccessoriesInView Messaging SoftwareCablesRuntime Communication Cables

Additional ResourcesBack Cover

Introduction_Category Types

This tab summarizes Rockwell Automation Global Sales and Marketing preferred printing standards. It also provides guidance on whether a publication should be released as JIT (print on demand) or if it requires an RFQ for offset printing.Find your publication type in the first section below. Use the assigned Printing Category information to determine the standard print specifications for that document type. The Printing Categories are defined below the Publication Type section. Note there may be slightly different print specifications for the categories, depending on the region (EMEA or Americas).For more information on Global Sales and Marketing Printing Standards, see publication RA-CO004 in DocMan.

Publication Type and Print Category

Publication TypeOff Set Print Category Spec. (See table below)JIT Spec. (See table below)DescriptionOrder Min **Order Max **Life Cycle Usage / Release Option

ADNA - PuttmanNAAdvertisement Reprint ColourNANAPresale / Internal

APA3D2Application Solution or Customer Success Story5100Presale / External

ARNANAArticle/Editorial/BylineNANAPresale / Internal

(press releases should not be checked into DocMan or printed)

ATB3, B4D5Application techniques5100Presale / External

BRA2 Primary, A1NABrochures5100Presale / External

CAC2 Primary, C1NACatalogue150Presale / External

CGNANACatalogue Guide150Presale / External

CLNANACollection550Presale / External

COA5, A6, A9D5Company Confidential InformationNANANA / Confidential

CPE-onlyE-only, D5Competitive Information550NA / Confidential

DCE-onlyE-onlyDiscount SchedulesNANAPresale / Internal

DIA1, A3NADirect Mail5100Presale / Internal

DMNANAProduct Demo550Presale / Internal

DSB3D5Dimensions Sheet15Post / External

DUB3D5Document Update15Post / External

GRB2D6Getting Results15Post / External

INB3 Primary, B2D5, D6Installation instructions15Post / External

LMNANALaunch Materials550Presale / Internal

PCB3D5Packaging Contents

PLE-only primary, B3E-onlyPrice List550Presale / Internal

PMB2D6Programming Manual15Post / External

PPA3D1Profile (Single Product or Service). NOTE: Application Solutions are to be assigned the AP pub type.5100Presale / External

QRB2 primary, B3, B5D5, D6Quick Reference15Post / External

QSB2 primary, B3, B5D5, D6Quick Start15Post / External

RMB2D5, D6Reference Manual15Post / External

RNB3D5Release Notes15Post / External

SGB1 Primary, B4D5, D6Selection Guide Colour550Presale / External

SGB2D5, D6Selection Guide B/W550Presale / External

SPA1, A2, A3, A4NASales Promotion NOTE: Service profiles are to be assigned the PP pub type.5100Presale / Internal

SRB2, B3D5, D6Specification Rating Sheet5100Presale / External

TDB2 Primary B3, B4, B5D5, D6Technical Data550Presale / External

TGB2, B3D6Troubleshooting Guide15Post / External

UMB2 Primary, B4D6User Manual B/W15Post / External

WDB3D5Wiring Diagrams / Dwgs15Post / Internal

WPB3 Primary, B5D5White Paper550Presale / External

** Minimum order quantities on all JIT items are based on the publication length. **

Publication lengthMinimum Order Quantity

77 or more pages1 (no shrink wrap required)

33 to 76 pages25

3 to 32 pages50

1 or 2 pages100

Pre-sale / MarketingAll paper in this category is White Brightness, 90% or better. Opacity 90% or better

CategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US Paper Requirements

A14 color170 gsm 2pp100# gloss cover, 100# gloss text

A24 color170 gsm , folded, 4pp100# gloss cover, 80# gloss text

A34 colorCover 170 gsm with Body 120 gsm, > 4pp80# gloss cover, 80# gloss text

A42 color170gsm Silk 120gsm Silk80# gloss cover, 80# gloss text

A52 color170gsm Silk 120gsm Silk80# gloss cover, 80# matt sheet text

A61 color170gsm Silk 120gsm Silk80# gloss cover, 80# matt sheet text

A74 color cover2 color textSelection GuideCategory being deleted10 Point Cover C2S50# matte sheet text

A84 color coverCategory being deleted50# matte sheet text, self cover

2 color text

Selection Guide

A92 color100gsm bond50# matte sheet text, self cover

Selection Guide

Gray shading indicates Obsolete Print Catagories

Post Sale / Technical Communication


B14 color cover270gsm Gloss 100gsm bond10 Point Cover C2S

2 color text50# matte sheet text

B21 color160gsm Colortech & 100gsm Bond90# Cover50# matte sheet text

B31 color100gsm bond50# matte sheet text, self cover

B42 color160gsm Colortech & 100gsm Bond90# Cover50# matte sheet text

B52 color100gsm bond50# matte sheet text, self cover

Catalogs


C14 color cover270gsm Gloss 90gsm silk10 Point Cover C2S

4 color text45# Coated Sheet

C24 color cover270gsm Gloss 80gsm silk10 Point Cover C2S

2 color text32#-33# Coated Sheet

JIT / PODAll paper in this category is White Brightness, 82% or better. Opacity 88% or better


D14 color170gsm white silk80# gloss cover, coated 2 sides

D24 color120gsm white silk80# gloss text, coated 2 sides, self cover

D34 colorCover 170gsm with Body 120gsm80# gloss cover, 80# gloss text coated 2 sides

D41 color160gsm tab90# index

D51 color80gsm bond20# bond, self cover

D61 colorCover 160gsm tab with Body 80gsm bond90# index, 20# bond

D72 color160gsm tab90# index

D82 color80gsm bond20# bond, self cover

D92 colorCover 160gsm tab with Body 80gsm bond90# index, 20# bond

D10Combination: 4 color cover, with 2 color bodyCover 160gsm with Body 80gsm90# index, 20# bond

Gray shading indicates Obsolete Print Catagories

Just In Time (JIT) or Off Set (OS)?

Use these guidelines to determine if your publication should be JIT (just in time/print on demand) or if it would be more economical to print OS (offset/on a press). OS print jobs require an RFQ (Request For Quote) in US. If your job fits into the Either category, an RFQ is recommended, but not required. In the US, RA Strategic Sourcing will discourage or reject RFQs for jobs that fall within the JIT category. Guidelines differ for black & white and color printing, so be sure to check the correct tables.

Black & White Printing

Color Printing

Color Printing

Print Spec Sheet

JIT Printing SpecificationsRA-QR005J-EN-P - 6/14/2013

Printing SpecificationYOUR DATA HEREInstructionsNO

(required) Publication Number:2706-TD007B-EN-ESample: 2030-SP001B-EN-P11 x 17LOOSE -Loose LeafYESPre-sale / MarketingTOP

Use Legacy Number:NOYES or NO8.5 x 11PERFECT - Perfect BoundA1LEFT

Legacy Number if applicable:Sample Legacy Number: 0160-5.338.375 x 10.875SADDLE - Saddle StitchA2RIGHTCORNER

Publication Title:InView Message Display SpecificationsSample: ElectroGuard Selling Brief80 character limit - must match DocMan Title8.25 x 11 (RA product profile std)PLASTCOIL - Plastic Coil (Coil Bound)A4BOTTOMSIDE

Used in Manufacturing:NOYES or NO - If Yes, must have Part No. listed below8.25 x 10.875STAPLED1 -1 positionA3

Part Number:If SAP Part Number, be sure to enter PN- before the number7.385 x 9 (RSI Std)STAPLED1B - bottom 1 positionA5

(required) CategoryB5Select Print Category A,B,C or D from category list, on "Introduction_Category Types" tab6 x 4STAPLED2 - 2 positionsA6

Paper Stock Color:White is assumed. For color options contact your vendor5.5 x 8.5 (half-size)THERMAL - Thermal bound (Tape bound)A7

Ink Color:One color assumes BLACK / 4 color assume CMYK / Indicate PMS number here4.75 x 7.75THERMALO - Thermal Bound (Tape bound - offline)A8

(required) Page Count ofPublication:14Total page count including cover. Enter PAGE count, not SHEET count4.75 x 7 (slightly smaller half-size)A9

(required) Finished Trim Size Width:A4 (8 x 11 ) (210 x 297 mm)This is sheet size, before folding4.25" x 5.50"Post Sale / Technical Communication

Fold:Review key below. Leave blank if folded for saddle stitching4 x 6B1

Finished Fold Size:This is size after folding is completed3 x 5B2

Binding/Stitching:STAPLED1 -1 positionReview key below9 x 12 (Folder)B3None

Stitching Location:CORNERBlank, Corner or SideA4 (8 x 11 ) (210 x 297 mm)B4Half or V or Single Fold

Drill Hole (Yes/No):All drilled publications use the 5-hole standard, 5/16 inch-size hole and a minimum of inch from the inner page border.A5 (5.83 x 8.26) (148 x 210 mm)B5C or Tri-Fold

Number of Tabs Needed:5 tab in stock at RR Donnelley36 x 24 PosterCatalogsDbleParll

Number of Pages per Pad:Average sheets of paper. 25, 50 75,100 Max24 x 36 PosterC1Sample

Glue Location on Pad:Glue location on pads18 x 24 PosterC2Short (must specify dimensions between folds in Comments)

(required) Business Group:Marketing CommercialAs entered in DocManJIT/PODZ or Accordian Fold

(required) Cost Center:19134-IAIf your Business Unit is Marketing Commercial, add the appropriate division name after 19134 using the chart on the right. All other Business Units: Enter only the number as in DocMan, no description. Example - 1902119134 - Commerc 19134 - OEM 19134 - Compone 19134 - Power C19134 - Global 19134 - Process 19134 - IA 19134 - Service 19134 - IMC 19134 - Safety 19134 - Industr 19134 - Softwar19134 - Mkt Dig 19134 - US MarkeD1Microfold or French Fold - designate no. of folds in Comments - intended for single sheet only to be put in box for manufacturing

Comments:D2Double Gate

FoldsHalf, V, Single C or Tri

Dble Parll

Z or Accordian Microfold or French

Double Gate

Short FoldSaddle-Stitch Items All page quantities must be divisible by 4.Note: Stitching is implied for Saddle-Stitch -no need to specify in Stitching Location.80 pgs max. on 20# (text and cover)76 pgs max. on 20# (text) and 24# (cover)72 pgs max. on 24# (text and cover)

Perfect Bound Items940 pgs max. w/cover (90# index unless indicated otherwise)70 pgs. min. for spine without words200 pgs min. for spine with words

Plastcoil Bound Items530 pgs max. of 20# (if adding cover deduct equivalent number of pages to equal cover thickness) (90# index unless indicated otherwise)

Tape Bound Items250 pgs max. on 20# no cover240 pgs max. w/cover (90# index unless indicated otherwise)

MBD000B0209.bin

MBD000B020B.bin

MBD000B020C.bin

MBD000B020A.bin

MBD000B0205.bin

MBD000B0207.bin

MBD000B0208.bin

MBD000B0206.bin

MBD000B0203.bin

MBD000B0204.bin

/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Average /GrayImageResolution 300 /GrayImageDepth 8 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 2.00000 /EncodeGrayImages true /GrayImageFilter /FlateEncode /AutoFilterGrayImages false /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Average /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile (None) /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False

/CreateJDFFile false /Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure true /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles true /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /NA /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /LeaveUntagged /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice

InView Message Display Specifications - Rockwell...

Documents

Transcript of InView Message Display Specifications - Rockwell...