Energy Efficiency in Serbian Industry – Implementation of Cleaner Production
Investment in Energy Efficiency and Cleaner Production An ...sbghcm.org/files/ENERGY.pdf ·...
Transcript of Investment in Energy Efficiency and Cleaner Production An ...sbghcm.org/files/ENERGY.pdf ·...
“Investment in Energy Efficiency and Cleaner Production – An approach to
improve competitiveness for Enterprises
Vu Tương Anh
Energy Efficiency- Cleaner Production Specialist
IFC Mekong Region
Content
• IFC and Climate change, Energy efficiency (EE) & Cleaner
production (CP)
• Why EE – CP?
• Regulation on EE- CP
• EE – CP Investments
2
3
• IFC is a member of WB, world‟s leader in financial
development for private sector
• Vision and purpose to contribute to development
• Invest and provide solution for a sustainably developed
world
• Create opportunity for people - improve people „s life in
poor countries
About IFC
IFC Climate activities: Technologies, products and services
“Do more with less”
Private sector solutions for climate mitigation / adaptation and inclusive development
ENERGY: Low carbon generation,
energy efficiency, storage, smart
grids.
BUILDINGS: Low carbon strategy,
energy efficiency, sustainable
materials.
TRANSPORTATION: Vehicles,
systems, fuels and logistics
WATER: Capture, treatment,
conservation, wastewater
treatment
AIR & ENVIRONMENT: Emission
control, trading and offsets
MANUFACTURING: Green chemicals,
RE/EE supply chain, cleaner
production.
AGRICULTURE & FORESTRY: Land
mgmt, low carbon and adaptation
strategies, biomass.
RECYCLING & WASTE: Recycling
and waste treatment services
Climate business will only scale and have impact with significant private sector participation–
that is where IFC has an important role to play
IFC Sustainable Energy Investments via FIs
Country: Peru PFI: BBVA Banco Continental IFC investment: $30M line of credit
Countries: Central/Eastern Europe FIs: Multiple banks IFC investment: $321M in lines of credit and guarantee facilities
Country: China FIs: Industrial Bank, Bank of Beijing and Shanghai Pudong Development Bank IFC investment: $275M risk sharing facilities support SE loans of more than $500M
Country: Turkey FI: Yapi Kredi Leasing IFC investment: $75M credit line
Country: Mexico PFI: Vertice IFC investment: $20M line of credit for energy efficient housing Ongoing: Panama, Costa Rica,
Country: Brazil FIs: Banco Real & Unibanco IFC investment: $80M credit line
Country: Russia and Ukraine FIs: Center Invest, NBD, MDM, URSA, and ProCredit IFC investment: $180M in line of credit
Country: Philippines FIs: BPI (AS-IS), BDO (AS), Metrobank (AS) IFC Investments: $90M risk sharing facilities
Country: Vietnam FI: Techcom Bank IFC investment: $25M credit line
IFC invested more than $ 2 billion in local financial institutions in the form of risk sharing and line of credit to support emissions reduction
Why Energy Efficiency and Cleaner Production
6
7
Energy consumption in VN - Challenge
•Energy demand in 2030 forecasted increasing
around 4 times with that of 2005
•Power load growth rate more than 10% /year
till 2025
•The energy use/GDP growth elasticity around 2
while this is under 1 in developed countries.
•Become energy importer in 2015.
• CO2 emission growth rate increased rapidly
8 8
Weather
Water
Food
i
Eco-system
Society
Health
GDP
- Increased intensity of storms, forest fire,
drought, flood, heat
nước- Threatening
water supply sourses Change of water threatening
the welfare of 1 billion people
Big cities threatened by rising sea level
t. - Decrease of food production in
many developing countries
Giảm sản lượng - Decrease
of output in developed
countries
Coral ecosystem is damaged and can not be recovered
Some of animal & vegetable species are extinct
Over 1 Billion people face the risk of moving – risk of
conflit increase
The dead-toll increases from 150,000 up to 300,000 each
year in an normal context
Globally possible loss of 20% GDP
Temperature change 1ºC
Why consequences of Climate change is a concern?
9
GHG Emission and Reduction Potential from Energy Sector
Cương độ CO2 , tấn CO2 trên triệu $
Total potential to reduce wastes
Total potential to reduce wastes with low cost
Vietnam 211 120
Thailand 180 100
Philippines 157 68
Indonesia 342 207
Tổng 890 495
Tiềm năng giảm thiểu trong lĩnh vực năng lượng
Source: WB, ADB
Area for Energy efficiency
Total potential to reduce
wastes
Electricity 264
Energy saving 6
Industry 115
Traffic 51
Building/ Residential area
39
Total 475
10
Investment to save 1Kwh is 3 times lower than investment to
produce 1 more Kwh
Source: MOIT
EE-CP Potentials in Industrial Sector in VN
Industry Potential
Cement 50%
Ceramic 35%
Thermal power 25%
Textile 30%
Construction materials 25%
Steel 20%
Agri-products 50%
EE- CP
EE Law
Green Growth
Strategy /
Sustainable
Development
Pushing and pulling factors for EE-CP
Competition/
Market Requirements
EE- CP Environemtal benefits
Energy Security Resource saving
Competitiveness
Profits
EE-CP Benefits
13
Three Approaches of EE-CP
EE-CP
New technology
Optimize equipment capacity
• Improve current equipment
and technology,
• Optimize current processes
• Apply Energy Management
System
14
EE-CP – Improving competitiveness
EE-CP
• Reduce waste treatment cost
• Corporate Social Responsibility
• Better corporate image in community
Increase productivity
• Reduce production cost
• Improve product quality
• Reduce re-processing
products
15
Examples / Case studies on EE-CP Application in VN
A textile Company in the North of Vietnam- Investment in replace high efficiency
production line and optimization of production process
No. Efficiency evaluation Unit
Efficiency from investing in new
production line
1 SEC saving from new techonology
production line kWh/kg 0.66
2 Electricity saving for the factory % 21.3%
3 Annual electricity saving kWh/year 1,597,200
4 Benefit from energy saving Million
VND/year 2,395.8
5 NPV M.VND 111,797.91
6 IRR % 46.7
7 Annual emission reduction Ton CO2 863.77
16
Examples / Case studies on EE-CP Application in VN
A plastic manufacturing company – Investment in replacing high efficiency
production line and optimization of production system
No.
Efficiency evaluation Unit Efficiency from investing in
new production line
1 Electricity saving for the
factory % 29%
2 Annual electricity saving kWh/year 938,048
3 Benefit from energy saving Million
VND/year 1,318
4 Payback period year 4,1
5 Annual emission reduction Ton CO2 244.3
17
Examples / Case studies on EE-CP Application in VN
A food processing company located in Long An Investment in replacing high
efficiency production line and optimization of production system
No. Efficiency evaluation Unit
Efficiency from investing in
new production line
1 Electricity saving for one
production line % 43.3%
2
Annual electricity saving kWh/year
1,800,500
3
Benefit from energy saving Million
VND/year 2,880
4 Payback period Năm /
Year < 3
5 Annual emission reduction Ton CO2 973.7
18 Luật Sử dụng Năng lượng Tiết kiệm và Hiệu quả
I
Regulations on Energy Efficiency and Conservation
REQUIREMENTS TO ENERGY INTENSIVE UNITS (Article 33)
Energy Efficiency and Conservation Law
The Energy efficiency and conservation law was passed and effective from
01 January 2011 which applies to organizations, households and
individuals in Vietnam.
Appoint an energy manager
Adopt a compulsory energy audit once every 3 year
Develop and implement annual and 5-year plans on
energy efficiency and conservation
Report results from implementation of energy efficiency
and conservation plan
Apply energy management models set out by the State
authorities
National Target Program on Energy Efficiency and
Conservation Law
Decision No1427/QĐ-TTg approved targets of the National Energy
efficiency and conservations period 2012-2015
Targets:
•Reduce 5% - 8% total national energy consumption in 2012-2015 in
comparison to energy demand estimates indicated in the Plan for
National Electricity Development from 2011 to 2020 up to 2030, or
equivalent to between 11-17 million TOEs from 2012 to 2015
•Reduce energy intensity by 10% from key energy using industries
including cement, steel and textile sectors (to 2015)
21
Energy Efficiency and Cleaner Production Investment
The market size
Vietnam:
368 Million USD/year
for food processing,
beverage, textile,
chemical, metallurgy
sectors
(Source: ReExCapital Asia)
Around 1 million
USD is investment
demand for industrial
sector Source: (MOIT and other
donors)
Investment forms for Energy Efficiency – Cleaner Production
• Firms self finance
• ESCO model (Energy Service Company ) : ESCO invest
and share saving
• Firms borrow money from banks / Banks financed
Investment format for Energy Efficiency – Cleaner Production
ESCO model: implementation of energy savings measures using a
contractual engagement between the ESCO and the client, through
Energy Performance Contract (EPC)
EPC is:
• Sustainable mechanism
• Innovative financing!
• Guaranteed savings
Client financing
Off-balance financing
• Shared savings
Option: Fast-out contract
• Chauffage
3 popular EPC :
ESCO model
Ideal source for project realisation
Experience
• Project realisation by experts in energy efficiency
Easy financing
• No capital investment required
• Access to off-balance sheet financing Financial impact
• Immediate and guaranteed savings • New capital equipment • Utility cost reduction • Cost control instead of cost increase
Investment format for Energy Efficiency – Cleaner Production
Financed by bank
Investment forms for Energy Efficiency – Cleaner Production
• Detailed audit - analysis of measures
• Bankable proposal using data from audit
• Contract negotiation
• Implementation of measures
• Reimbursement periods and energy management
IFC Sustainable Energy Finance Program in Vietnam
Overall objective: to support the wide-scale implementation, increase access to local sources of
financing and catalyze private sector investment in sustainable energy (EE, RE and resource
efficiency) projects in corporate, SME, industrial and commercial sectors resulting in reduction of
GHG emissions and improvement in the use of natural resources.
Financial Institutions (FIs)
• Provide Advisory Service to Techcombank, VietinBank regarding Sustainable Energy Finance
• Loan Commitment: US$63 million
• 159,512 MWh/year energy use avoided and 88,347 ton CO2e/year expected to be avoided
Market Players
• Linkage between service and technology suppliers, end-users and FIs
Market Awareness
• “Energy Efficiency: New Awareness - New Power”
• (3-year national EE&C awareness campaign jointly implemented by MOIT, IFC and Embassy of
Denmark
Thank you for your attention !
28
In Hanoi:
IFC Mekong
3rd Floor, 63 Ly Thai To Street
Hanoi, Vietnam
Tel: +844 39378742 Fax: +844 38247898
Mobile: +8490 3340133
E-mail: [email protected]; Web: www.ifc.org
G
Introduction to EnMS:
ISO 50001
Giới thiệu về
Hệ thống quản lý năng
lượng: ISO 50001
Presented by: Praveen Tekchandani Date: 3 Apr 2014
TÜV SÜD
Topics to discuss
1
Background on Energy & usage
Thông tin cơ bản về năng lượng và sử
dụng năng lượng
2
EnMS basic concepts
Khái niệm cơ bản về quản lý năng
lượng
3 Case Studies
Những dự án tham khảo
4
Integration with EMS & QMS
Hệ thống quản lý tích hợp EMS & QMS
5 Partnering TÜV SÜD
Hợp tác cùng TÜV SÜD
TÜV SÜD 03/04/2014 Energy Management Slide 3
Q1. How many % of energy used by bulb is converted to light?
Câu hỏi 1. Một bóng đèn sử dụng bao nhiêu % năng lượng để
chuyển hóa thành ánh sáng?
Only 10% of energy in a light bulb is used to create light.
Ninety percent of a light bulb’s energy creates heat.
Bóng đèn chỉ sử dụng10% năng lượng để tạo ra ánh sáng.
90% năng lượng còn lại của bóng đền dùng để sinh nhiệt.
Q2. Is one day’s solar energy that reaches earth enough to meet
the world’s energy demand for one year?
Câu hỏi 2. Năng lượng mặt trời trong một ngày tỏa xuống trái
đát có đủ để đáp ứng nhu cầu năng lượng của thế giới trong
một năm không?
Enough sunlight reaches the earth’s surface each minute to
satisfy the world’s energy demands—for an entire year.
Đủ, ánh sáng mặt trời tỏa xuống bề mặt trái đất mỗi phút để
đáp ứng nhu cầu năng lượng của thế giới- cho cả một năm
Did you know? Bạn có biết?
TÜV SÜD 03/04/2014 Energy Management Slide 4
Energy flow – an example / Dòng chảy năng lượng – ví dụ
Input Energy – Fuel/
Năng lượng đầu vào-
Nhiên liệu
Eg: 100 Joules/
VD: 100 Joule
Generation of
electricity – another
form of energy/ Phát
sinh điện – một dạng
khác của năng lượng
Eg: 40 Joules
VD: 40 Joule
Transmission of
energy/ Chuyển
hóa năng lượng
Eg: 35 Joules
VD: 35 Joule
Usage of electricity
sử dụng điện năng
Eg: Only 3.5 Joules is
converted to light
VD: Chỉ 3.5 Joule chuyển
đổi thành ánh sáng
• Note: At each stage energy is dissipated i.e waste. Therefore, we need energy efficiency at every stage.
Ghi chú: Ở mỗi giai đoạn năng lượng bị mất đi tức là sự lãng phí. Vì thế, chúng ta cần sử dụng năng lượng
hiệu quả tại mỗi giai đoạn.
Emissions during combustion of
fuel (GHG)/ Khí thải trong quá
trình đốt cháy nhiên liệu (GHG )
TÜV SÜD 03/04/2014 Energy Management Slide 5
Energy flow – an example
Input Energy –
Fuel/ Năng lượng
đầu vào- Nhiên liệu
Eg: 100 Joules/
VD: 100 Joule
Generation of
electricity – another
form of energy/ Phát
điện – một dạng khác
của năng lượng
Eg: 40 Joules
VD: 40 Joule
Transmission of
energy/ Chuyển
tải năng lượng
Eg: 35 Joules
VD: 35 Joule
Usage of electricity
Việc sử dụng điện năng
Eg: Only 3.5 Joules is
converted to light
VD: Chỉ 3.5 Joule chuyển
đổi thành ánh sáng
ISO 50001 can be used to manage any component within this boundary or the whole boundary.
Áp dụng Tiêu chuẩn ISO 50001 để quản lý bất kỳ bước nào trong quy trình này hoặc cả quy trình sử dụng năng
lượng
Emissions during combustion
of fuel (GHG)/ Khí thải trong
quá trình đốt cháy nhiên liệu
(GHG )
TÜV SÜD
Industry alone requires/ sản
xuất công nghiệp chiếm
51.7%
11%
19%
15%
6% 7% 9%
8%
13%
12%
Pumps
Process
Refrigeration
Material Handling
Fans & Blowers
Compressors
Lighting
Boilers & Heating
HVAC
Sectors/Các lĩnh vực
Utilities Những hệ thống vận hành
phụ trợ sử dụng Năng lượng
Industry Consumptions/ Tiêu thụ
năng lượng trong Công nghiệp
Ref. Book: World Energy Outlook 2012
Ref. Book: World Energy Outlook 2012
Energy Scenario: Industry
Tình hình tiêu thụ năng lượng trong sản xuất công nghiệp
TÜV SÜD 03/04/2014 Energy Management Slide 7
Why to focus on Energy?/ Tại sao phải tập trung vào năng lương ?
Save energy consumption/
Tiết kiệm năng lượng tiêu thụ
• Improving energy efficiency at any step/ Nâng cao năng lượng hiệu quả tại mọi bước
• Cost savings/ Tiết kiệm chi phí
Reduce the emission during
combustion/ giảm thiểu
lượng khí thải trong suốt quá trình đốt cháy
• Reduction of GHG emission from combustion/ Giảm thiểu lượng khí thải nhà kính từ quá trình đôt cháy
Resource conservation/ Bảo tồn tài
nguyên • Fuels used in energy
generation is limited/ Giới hạn việc tiêu hao nhiên liệu khi sản sinh năng lượng
TÜV SÜD
It is a measure of the impact anthropogenic activities have on the environment in terms of amount of green house gases produced, measured in kg or tonnes of CO2e.
Process which emits any of the following GHGs are considered for Carbon Footprint evaluation:
What is Carbon Footprint ??
03/04/2014 Carbon Footprint & Neutrality - our next step towards Green
future Slide 8
Green house gas
(GHG)
Carbon-di-oxide (CO2)
Methane (CH4)
Nitrous oxide (N2O)
Per fluoro carbons (PFCs)
Hydro fluoro carbons (HFCs)
Sulphur hexa fluoride (SF6)
Global Warming Potential (GWP)
1
25
298
2,000 ~
5,000 ~ 8,000
Above 10,000
TÜV SÜD
Topics to discuss
1
Background on Energy & Usage
Thông tin cơ bản về năng lượng và
sử dụng năng lượng
2
EnMS basic concepts
Khái niệm cơ bản về hệ thống
quản lý năng lượng
3 Case Studies
Những dự án tham khảo
4 Integration with EMS & QMS
Sự hợp nhất EMS & QMS
5
Partnering TÜV SÜD
Hợp tác cùng TÜV SÜD
TÜV SÜD
• A management system is the framework of processes and procedures
used to ensure that an organization can fulfill all tasks required to achieve its objectives / Một hệ thống quản lý là một cơ chế khung bao gồm các quy trình và những thủ tục được áp dụng để đảm bảo một tổ chức có thể thực hiện đầy đủ các nhiệm vụ cần thiết để đạt được các mục tiêu đã đề ra của mình.
• Most MS standards operate on the Continual improvement cycle: Plan, Do, Check, Act. Hầu hết các tiêu chuẩn hệ thống quản lý hoạt động theo Chu kỳ cải tiến liên
tục: lập Kế hoạch, thực hiện, kiểm tra, hành động.
• ISO 50001 is a system based initiative to conserve energy Tiêu chuẩn ISO 50001 là một hệ thống dựa trên sáng kiến bảo tồn năng
lượng
What is Management System standard
4/3/2014 Energy Management Slide 10
TÜV SÜD
Approach of Energy management today
Phương pháp tiếp cận HT Quản lý năng lượn ngày nay
11
Source: UNIDO 2010
Source: UNIDO
Impact on companies will be multi-dimensional,
each organization will be unique.
Tác động lên các công ty sẽ mang tính đa chiều,
mỗi tổ chức là 1 tổ hợp khác biệt.
Focuses on the culture of an organization.
Tập trung vào văn hóa của một tổ chức
With EnMS/ có hệ thống
quản lý năng lượng With
out E
nMS
/ Khô
ng c
ó hệ
thố
ng Q
uản
lý n
ăng
lượ
ng
TÜV SÜD 03/04/2014 Energy Management Slide 12
…exploring energy
efficiency opportunities
beyond the surface!!/ khám
phá những cơ hội sử dụng
năng lượng hiệu quả bên
dưới bề nổi của 1 tảng
băng
Adoption of EnMS is like../ Việc áp dụng EnMS giống như..
TÜV SÜD
• Energy policy / Chính sách năng lượng
• Cross-divisional management team/ Lập đội ngũ quản lý dự án liên kết nhiều phòng ban
• Energy review/ Đánh giá năng lượng
• Baseline (s)/ Đường cơ sở
• Energy performance indicators (EnPIs)/Chỉ số hiệu suất năng lượng (EnPls)
• Energy objectives and targets/ Các mục đích và mục tiêu năng lượng
• Action plans/ Kế hoạch hành động
• Operating controls and procedures/ Quy trình và Hoạt động kiểm soát sản xuất
• Measurement, verification, and documentation/Đo lường, thẩm tra và hệ thống hóa tư liệu bằng chứng
• Reporting of progress/ báo cáo tiến độ
• Continual improvement (back to step Energy review)/
Không ngừng cải tiến ( trở lại bước đánh giá năng lượng)
ISO 50001 Key Elements/ Những yếu tố chính của Tiêu
chuẩn ISO 50001
TÜV SÜD
Energy Review
03/04/2014 Energy Management Slide 14
Energy source/
Nguồn năng lượng
• Analyze energy use and consumption/ phân tích hoạt động tiêu thụ năng lượng
• Identify current energy sources/ Xác định các nguồn năng lượng hiện có
• Evaluate past and present energy use/ Đánh giá việc sử dụng năng lượng trong quá khứ và hiện tại
Significant Energy use/ Hoạt động tiêu
hao năng lượng đắng kể
• Identify the areas of significant energy use/ Xác định các khu vực sử dụng năng lượng đáng kể
• Identify relevant variable affecting significant energy use/ Xác định những biến đổi tác động đáng kể tới việc sử dụng năng lượng
• Identify the current performance of facilities, equipment related to significant energy uses/ Xác định hiệu suất của trang thiết bị,máy móc liên quan đến hoạt động tiêu thụ năng lượng nhiều.
Opportunities of
improvement
Những cơ hội cải tiến
• Identify, prioritize and record opportunities for improving energy performance./ Xác định, đặt thứ tự ưu tiên và ghi nhận lại các cơ hội để có thể cải thiện hiệu suất năng lượng.
TÜV SÜD
Efficiency evaluation, fuel consumption & optimization/ Đánh giá hiệu
quả, sự tiêu thụ nhiên liệu và việc tối ưu hóa
Estimation of various losses/ Dự đoán các sự lãng phí.
Measurement of surface temperatures and estimation of heat losses/
Đo mức độ phát thỏa nhiệt và ước tính sự thất thoát nhiệt.
Estimation of heat balance/ Ước tính sự cân bằng nhiệt
Monitoring of operating parameters vis-à-vis desirable parameters/
Giám sát các thông số vận hành đối với các thông số mong muốn.
Evaluation of various energy saving opportunities/ Đánh giá các cơ hội
tiết kiệm năng lượng.
Cooling Towers & Pumps/
Tháp giải nhiệt & hệ thống
Máy bơm Evaluation of range and approach/ Đánh giá phạm vi và phương pháp tiếp
cận
Effectiveness of cooling towers/ Tính hiệu quả của các tháp giải nhiệt
Measurement of power parameters (kW, kVA, pf, frequency, current,
voltage) of cooling tower fans/ Đo các chỉ số năng lượng (kW, kVA, pf,tần số,
dòng, điện áp) của các cánh quạt tháp giải nhiệt.
Application potential for energy saving retrofits/ Ứng dụng phạm vi tiềm
năng cho những cải tiến tiết kiệm năng lượng.
Key utilities to focus
Key utilities to focus/ Những hệ thống vận hành chính
cần chú ý
TÜV SÜD
Steam Generation/ Quy trình phát sinh hơi
Boiler Efficiency & Performance/ hiệu suất & hiệu quả
của lò hơi
Steam to fuel ratio, SFC w.r.t production/ Hơi nước tới
tỉ lệ nhiên liệu, sản phẩm SFC w.r.t
Feed water analysis & temperature optimization/ Phân
tích việc tiếp nước và tối ưu hóa nhiệt độ
Blow-down heat recovery/ Thu hồi nhiệt độ xả đầy
Steam quality etc./ Chất lượng hơi nước.v.v..
Steam Distribution/ Sự phân bố hơi nước
Steam Pipe sizing & layout/ Kích thước ống hơi nước
và cách bố trí
Pr. Reducing valves, pr. Drop study/ Các van giảm áp
Pr., việc nghiên cứu Pr.
Steam Trap selection & performance/ Việc chọn lựa
bẫy hơi và hoạt động của bẫy hơi.
Insulation survey/ Khảo sát các vật liệu cách nhiệt
Steam leakages etc./ Rò rỉ hơi nước
Key utilities to focus
Steam Utilization/ Sử dụng hơi nước
Steam pr. & temp. required as per process/
Hơi nước pr. & nhiệt độ yêu cầu cho mỗi quy trình
Moisture separator/ Phân cách độ ẩm
Steam flow rate measurement/ Đo tỉ lệ dòng
chảy hơi nước
Condensate Recovery/ Thu hồi nước
ngưng tụ
Condensate recovery from process/ Thu hồi
nước ngưng tụ từ quy trình
Steam trap design & installation/ Thiết kế bẫy
hơi và lắp đặt
Condensate line size & layout/Kích thước
đường dây ngưng tụ và cách bố trí
Flash Steam generation/ phát sinh hơi cấp tốc
Thermo-compressor etc/ Máy nén nhiệt
Key utilities to focus/ Những hệ thống vận hành chính
cần chú ý
TÜV SÜD
Key utilities to focus/ Những hệ thống vận hành chính
cần chú ý
03/04/2014 Energy Management Slide 17
Detailed audit in lighting system normally results in considerable savings. Illumance readings with a lux meter should act as a
basis for comparative purpose. The study will cover measurement of lux level at work place and at various points of light usage.
Application of retrofits such as:/ Việc đánh giá chi tiết hệ thống chiếu sáng sẽ cho ra những kết quả tiết kiệm năng lượng đáng
kể. Độ rọi và chỉ số độ chiếu sáng lux sẽ là chỉ tiêu đánh giá so sánh chính. Sự đánh giá được tiến hành bằng hoạt động đo
lường chỉ số lux tại nơi làm việc và những khu vực sử dụng ánh sáng khác nhau. Có thể cân nhắc trang bị thêm:;
Timer control/ Bộ điều khiển định thời
Photocell control for street lighting/ Lắp đặt kiểm soát tế bào quang điện cho đèn đường cho ánh sáng trên đường
Use of energy efficient lighting/ Sử dụng hệ thống chiếu sáng tiết kiệm năng lượng
Grouping of lighting system, to provide greater flexibility in lighting control/ Nhóm hóa hệ thống chiếu sáng,cung cấp tính linh
động cho hoạt động kiểm soát chiếu sáng
Installation of microprocessor based controllers / Lắp đặt các bộ điều khiển vi xử lý
Optimum usage of day lighting / Tối ưu hóa việc sử dụng ánh sáng ban ngày
Installation of servo stabilizer for lighting feeder / Lắp đặt bộ ổn áp phụ cho hệ thống tiếp sóng
ánh sáng
TÜV SÜD Slide 18
Q. What is the carbon footprint for a flight travel from Beijing to
Munich?
Câu hỏi: Lượng khí C02 sinh ra của một chuyến bay đi từ
thành phố Beijing đến Munich là bao nhiêu?
1,340 kg CO2 per return trip/ mỗi chuyến bay về
3,880 kg CO2 per return trip
5,360 kg CO2 per return trip
Q. What is a carbon footprint of a can of Coke?
Câu hỏi: Lượng khí C02 trong một lon Coca là bao nhiêu?
170 gm of CO2 per 330 ml can. / 170 gm C02 trong mỗi lon
330 ml
Did you know?/ Bạn có biết ?
TÜV SÜD
Carbon Footprint: Can of Coke/ Lượng carbon: Một lon Coca
TÜV SÜD
Topics to discuss
1
Background on Energy & Usage
Thông tin cơ bản về năng lượng và
việc sử dụng năng lượng
2 EnMS basic concept
Khái niệm cơ bản về EnMS
3 Case Studies
Những dự án tham khảo
4 Integration with EMS & QMS
Sự hợp nhất EMS & QMS
5 Partnering TÜV SÜD
Hợp tác cùng TÜV SÜD
TÜV SÜD
Reference project: Window Production/ Dự án tham khảo:
Sản xuất cửa sổ
Window manufacturer Factors assessed/ Những chỉ tiêu đánh giá • Electrical power (supply contract, consumers)
Năng lượng điện ( hợp đồng cung ứng, các khách hàng )
• Natural gas (radiant heating, hot water heating systems)
Khí đốt tự nhiên ( nhiệt độ tỏa ra, hệ thống nhiệt nước nóng )
• Compressed air (generation, distribution, use)
Khí nén ( phát sinh, phân phối, sử dụng)
• Water (consumption, waste water, rainwater use)
Nước (tiêu dùng, nước thải, sử dụng nước mưa )
Results/ Kết quả • Reserve demand aligned to optimised situation/ Nhu cầu dự trữ phù hợp
với tình hình tối ưu hóa
• Optimisation in areas of electricity consumption (production, lighting,
compressed air)/ Tối ưu hóa trong các hoạt động tiêu thụ điện ( sản
xuất, chiếu sáng, khí nén)
• Reduction in gas consumption for radiant heating
Giảm thiểu việc tiêu thụ khí đốt cho sự tỏa nhiệt
• Decreased leakage in compressed-air network
Giảm rò rỉ trong mạng lưới khí nén
Return on investment/ tỷ lệ thu hồi vốn
• Savings : € 22,500 already in the first year through low-cost
measures and changes in processes and procedures
Tiết kiệm : Đã tiết kiệm được 22,500 EUR trong năm đầu tiên
thông qua hệ thống đo lường chi phí thấp và những thay đổi trong
quá trình và tiến trình sản xuất
TÜV SÜD
Reference project: Dairy Plant/ Dự án tham khảo: Nhà
máy sữa
Dairy Plant Factors assessed / Những chỉ tiêu đánh giá • Heat generation (boiler)/ Sinh nhiệt ( nồi hơi )
• Refrigeration / cold stores (compressor system, ice storage)
Tủ lạnh/ kho lạnh ( hệ thống máy nén khí, kho lạnh )
• Compressed air (generation, distribution)
Khí nén ( sinh, phân phối )
• Heat use (demand, loss, recovery)
Sử dụng nhiệt ( nhu cầu, tổn thất, phục hồi )
• Refrigeration applications (demand, temperatures)
Ứng dụng làm lạnh ( nhu cầu, nhiệt độ )
• Electrical power (areas of consumption)
Điện năng ( các khu vực tiêu thụ)
• Energy data management
Quản lý dữ liệu năng lượng Results/ Kết quả Optimisation of supply infrastructure/ Tối ưu hóa hạ tầng chuỗi cung ứng • Use of economiser in steam generation / Sử dụng bộ tiết kiệm nhiệt trong thế hệ
nồi hơi
• Reduction in leakage rate in compressed air supply/ giảm tỷ lệ rò rỉ trong cung cấp
khí nén
• Optimisation of pressure spread in piping system optimised/ Tối ưu hóa áp lực mở
rộng trong hệ thống đường ống tối ưu
• Alignment in preventive and corrective network maintenance/ Liên kết duy trì chuỗi
phòng ngừa và khắc phục
• Fitted automatically closing isolation valve/ Trang bị van độc lập khóa tự động
• Use of waste heat from compressed-air compressors / Sử dụng nhiệt thải từ máy
nén khí nén.
• Optimisation of refrigeration systems/ Tối ưu hóa các hệ thống làm lạnh
– condenser condition and maintenance / tình trạng ngưng và bảo trì
– increase in vaporiser temperature / tăng nhiệt độ bay hơi
• Insulation of media pipes (steam and hot water) Cách nhiệt những ống dẫn media
Optimisation of demand infrastructure/ Tối ưu hóa cơ sở hạ tầng theo yêu cầu • Use of exhaust steam from cap sterilisation heat water for the pail washer/ Sử dụng
hơi nước thải từ nước đun nóng nắp khử trùng cho máy giặt thùng
• Glass washer: use of recuperator, insulation of complete machine, established regular
preventive and corrective maintenance/ kính máy giặt: sử dụng máy thu hồi nhiệt,
insulation of complete machine, hình thành việc phòng ngừa, khắc phục duy trì
thường xuyên.
Return on investment/Tỷ lệ thu hồi vốn
• Savings: € 54,000 p.a. taking into account necessary investments amounting to € 75,000 and an amortisation period of approx. 2.5 years for the consulting services
Tiết kiệm: 54K Euro với tổng vốn đầu tư 75,000 EUR trong thời gian thu hồi vốn khoảng 2.5 năm đối với áp dụng các dịch vụ tư vấn.
TÜV SÜD
Reference project: Paper production/ Dự án tham khảo: nhà
máy Sản Xuất Giấy
Paper producer/ Sản xuất Giấy Factors assessed/ Những yếu tố đánh giá • Energy generation in a combined cycle power plant/ Sản xuất năng lượng trong một nhà
máy năng lượng theo chu trình kết hợp.
• Conditioning process and flash dryer (Market DIP)/ Chu trình trước khi gia công và máy
sấy cấp tốc ( thị trường DIP)
• Water and sludge cycles (conditioning, paper machine, cleaning)/ các chu trình nước và
bùn ( trước gia công, máy làm giấy, làm sạch )
• Water balance across total process/ Cân bằng nước xuyên suốt quy trình
• Heat recovery, in particular hood exhaust air of paper machine/ thu hồi nhiệt, đặc biệt là
khí thải mũ trùm của máy làm giấy.
Results/ Kết quả • Fresh-water demand reduced: Multiple use technology/ giảm thiểu nhu cầu nước sử
dụng nước sạch: áp dụng nhiều phương án kỹ thuật
• Energy demand reduced: Fewer losses, heat recovery, waste heat utilisation/ Nhu cầu
năng lượng giảm: thiệt hại ít, thu hồi nhiệt, sử dụng nhiệt thải.
• Combined cycle power plant used to capacity: Peripheral production to capacity fuel
substitution increased/ Năng lượng chu trình kết hợp, nhà máy đã sử dụng với khả
năng: sản xuất thiết bị ngoại vi để tăng khả năng nâng cao việc thay thế nhiên liệu.
• Heat recovery improved: Hood exhaust air: Paper machine 1/ Cải thiện việc thu hồi nhiệt:
Khí thải mũ trùm của máy làm giấy.
Return on investment/ tỷ lệ thu hồi vốn
• Savings: € 50,000 p.a. taking into account necessary investments
amounting to € 120,000
Tiết kiệm: 50,000 EUR đã tính phần chi phí đầu tư thiết yếu lên
đến 120,000 EUR
TÜV SÜD
Reference Project: Textile Finishing/ Dự án tham khảo:Nhà
máy dệt
Textile producer Factors assessed/ Những yếu tố đánh giá • Power generation plant (steam boiler)/ Nhà máy sinh năng lượng (
lò hơi )
• Media (electricity, fuel, water, steam, compressed air)/ Đa phương
tiện ( điện, nhiên liệu, nước, hơi, khí nén)
• Production processes (textile finishing, dye works, printing works) for
energy and media/ Tiến trình sản xuất (textile finishing, công việc
nhuộm, công việc in ấn) cho năng lượng và media
• Material balance of printing works
• Heat recovery Results/ Kết quả • Installation engineering (energy and water) optimised/ Kỹ thuật lắp đặt( năng
lượng và nước )tối ưu hóa.
• Installations (recycling of cooling water) modified/ Các phần lắp đặt ( việc tái sử
dụng nước làm mát ) tối ưu hóa.
• Mode of operation and fuel use in boiler house optimised/ Phương thức vận hành
và sử dụng nhiên liệu trong lò hơi được tối ưu hóa
• Heat recovery from waste water, treatment of parts of the inflow/ Thu nhiệt từ
nước thải, việc xử lý những bộ phận của dòng chảy vào trong
• Waste heat from dryers used
Return on investment/ tỷ lệ hoàn vốn • Savings: € 40,000 p.a. taking into account necessary investments
amounting to € 135,000
Tiết kiệm : 40,000 EUR đã tính luôn phần chi phí những khoản
đầu tư thiết yếu 135,000 EUR
TÜV SÜD
Reference Project: Chemical fibre production/ Dự án tham
khảo: nhà máy sản xuất sợi hóa học
Factors assessed/ Các yếu tố đánh giá • Assessment of production process and condition of installations/ Đánh giá tiến trình
sản xuất và điều kiện lắp đặt
• Analysis of power and media purchasing and distribution on the basis of submitted
documentation/ Phân tích điện năng và chi trả media và phân phối trong những tài
liệu đã được gửi.
• Assessment of the extensive air-handling units for technology- and climate-related
purposes / Đánh giá của các đơn vị xử lý không khí lớn về công nghệ- và các
mục đích liên quan đến khí hậu
• Energy- and ventilation-related measurements/ Đo lường năng lượng và hệ thống
thông gió
• Calculation and preparation of material balances/ Tính toán và cân bằng chi phí
nguyên liệu đầu vào
Results/ Kết quả • Quantification of power and heat distribution to process steps and ventilation
systems/ Định lượng điện năng và phân phối nhiệt đối với các bước tiến hành
và các hệ thống thông gió.
• Explanation of the balance of the purchase and use of electricity, heat and cooling
(low pressure steam, hot & cold water)/ Giải thích về sự cân đối của việc mua và
sử dụng điện, nhiệt và làm mát (lò hơi áp suất thấp, nước lạnh & nóng )
• Reduction in amount of energy used to preheat soft water/ Giảm thiểu lượng điện
năng được sử dụng để đun nóng nước nguội
• Reduction in steam consumption through utilisation of waste heat potential / Giảm
thiểu việc tiêu thụ thông qua việc sử dụng các nhiệt thải tiềm năng
• Modifications of ventilation areas and air-handling units/ Chỉnh sửa các khu vực
thông gió và những đơn vị xử lý không khí
• Optimisation of air-handling units in line with amended requirements/ Tối ưu hóa
các đơn vị xử lý không khí không phù hợp với các yêu cầu sửa đổi
• Low-voltage installations bundled/ Lắp đặt kèm theo điện áp thấp
• Optimisation in areas of electricity consumption/ Tối ưu hóa các lĩnh vực tiêu thụ
điện năng
Return on investment • Savings: Feasible optimisation potential including reduction in
operating costs > € 500,000 p.a., investments amounting to € 280,000 and an amortisation period of < 1 year
Tiết kiệm mọi chi phí tối đa bao gồm giảm chi phí vận hành > 500,000 EUR với những khoản đầu tư 280,000 EUR và giai đoạn hoàn vốn < 1 năm
Chemical fibre producer/ Sản xuất sợi hóa học
TÜV SÜD
Typical Saving areas / Những áp dụng tiết kiệm năng lượngđiển
hình
Saving Potential in KWh
Khoản tiết kiệm tiềm
năng, tính theo KWh Capacity improvement of the compressor to the rated value by cleaning or
replacing the air suction filter, checking and replacing piston rings / cylinder
lining./ Nâng cao năng lực của máy nén với giá trị đánh giá bằng việc làm sạch
hoặc việc thay thế bộ phận lọc khí, kiểm tra và thay thế các vòng piston/ xylanh
248517
Energy saving by providing VFD drive to one of the existing operating
Compressor in addition to repair & maintenance of both the compressors./ Tiết
kiệm năng lượng bằng cách cung cấp VFD drive tới một máy nén hiện có đang
vận hành , ngoài việc sửa chữa và bảo trì cả hai máy nén này.
37196
Energy saving by providing 550 CFM screw compressor with VFD drive in
addition to repair & maintenance of one of the existing compressor. / Tiết kiệm
năng lượng bằng cách cung cấp 550 CFM máy nén khí cùng trục VFD, ngoài
việc sửa chữa và bảo tri một máy hiện có.
37196
Energy saving by reduction of leakages through out the entire plant / Tiết kiệm
năng lượng bằng cách giảm rò rỉ trong suốt nội bên trong nhà máy 216000
Effective cooling of air in the inter coolers of the compressors will lead to
increase in volumetric efficiency of the compressor./ Việc làm mát hiệu quả của
không khí trong bộ phận làm mát bên trong các máy nén sẽ dẫn tới việc gia
tắng hiệu suất thể tích của máy nén.
58102
By providing single cooling water circuit through compressors and cooling tower
will lead to elimination of one of the cooling water pump./ Bằng cách cung cấp
mạch nước làm mát duy nhất qua các máy nén và tháp làm mát sẽ dẫn đến việc
loại bỏ một trong những máy bơm nước làm mát.
41340
Medium Size foundry producing Grey Iron Castings required for Automobile, Farm Equipment Sector & Diesel Engines Industry./Những xưởng đúc quy mô
trung bình sản xuất những khuôn đúc kim loại phục vụ cho ngành công nghiệp Ô tô, lĩnh vực nông cụ & nghành công nghiệp động cơ Diesel
Reference project: Forging Industry
TÜV SÜD Slide 27
Topics to discuss
1
Background on Energy & Usage
Thông tin cơ bản về năng lượng và
sử dụng năng lượng
2 EnMS basic concept
Khái niệm cơ bản về EnMS
3 Case Studies
Nghiên cứu tình huống
4 Integration with EMS & QMS
Hệ thống tích hợp EMS và QMS
5 Partnering TÜV SÜD
Hợp tác cùng TÜV SÜD
TÜV SÜD 03/04/2014 Energy Management Slide 28
Environment declaration
EMAS/ EMAS
Tuyên bố về môi trường
Energy review/ Đánh giá
năng lượng
Energy efficiency/ Hiệu
quả năng lượng
Energy savings/ Tiết kiệm
năng lượng
Legal requirements/
Những yêu cầu hợp
pháp
Policy
Objectives and Targets
Resources
Training/Communication
Monitoring & Measurement
Operational control
Internal audits
Management Review/
Chính sách, những mục đích và các mục tiêu, các nguồn, đào tạo/
Quản lý truyền thông và đo lường, quản lý thực hiện, các
Đánh giá nội bộ , đánh giá quản lý
Emergency preparedness/
Sự chuẩn bị cho tình huống khẩn cấp
Quality planning
Traceability/ Lên kế hoạch truy xuất nguồn gốc
Additional requirements for EnMS
Những yêu cầu được thêm vào EnMS
TÜV SÜD
Energy Management Systems
Comparison of ISO 50001 and ISO 14001/ So sánh Tiêu chuẩn ISO 50001 và Tiêu
chuẩn ISO 14001
Energy Management Systems/ Các hệ thống quản lý
03/04/2014 Slide 29
TÜV SÜD
Energy Management Systems
Comparison of ISO 50001 and ISO 14001/ So sánh Tiêu chuẩn ISO 50001 &
Tiêu chuẩn ISO 14001
Energy Management Systems
03/04/2014 Slide 30
TÜV SÜD Product Services
Measurements &
Verification/ Sự đo lường
và thẩm tra
ISO 14001 certification/
Tiêu chuẩn ISO 14001
Setup a team to drive
energy movement/ Xây
dựn một đội ngũ thực hiện
phong trào năng lượng
Conduct a baseline study –
Energy audit/ Thực hiện
nghiên cứu đường cơ sở
và đánh giá năng lượng
Provide internal auditor/
Energy audit training/ Cung
cấp đánh giá viên nội bộ/
Đào tạo đánh giá viên năng
lượng
Implement an Energy
management system/
Thực hiện một hệ thống
quản lý năng lượng
Internal audit of the
Management system/
Đánh giá nội bộ của hệ
thống quản lý
Integration with
EMS/ tích hợp cùng EMS
Third party audit &
Certification/ Đánh giá & cấp chứng nhận của bên thứ 3
To
wa
rds E
ne
rgy e
ffic
ien
cy/ H
ướ
ng
đế
n n
ăn
g lư
ợn
g h
iệu
qu
ả
EnMS
certification/ Giấy
chứng nhận EnMS
Increase
Awareness/ Gia tăng nhận thức
Identify energy efficient
opportunities
Transition from EMS to EnMS/ Sự chuyển đổi từ EMS sang
EnMS
Timeline – months/ Thời gian – Các tháng 0 months
0 tháng
2-5 months
2-5 tháng
Establish a culture of Energy efficiency
Hình thành một văn hóa năng lượng hiệu quả
Cost savings
Tiết kiệm chi phí
CSR initiative/sáng
Kiến trách nhiệm
Xã hội
Embarking towards Energy Efficiency/
Hướng tới sử dụng năng lượng hiệu quả
6-9 months
6-9 tháng
4 basic steps/ 4 bước cơ bản :
TÜV SÜD
Topics to discuss
1
Background on Energy & Usage
Thông tin cơ bản về năng lượng và
sử dụng năng lượng
2 EnMS basic concept
Khái niệm cơ bản về EnMS
3 Case Studies
Nghiên cứu tình huống
4 Integration with EMS & QMS
Sự kết hợp EMS & QMS
5 Partnering TÜV SÜD
Hợp tác cùng TÜV SÜD
TÜV SÜD 03/04/2014 Energy Management Slide 33
Identification of opportunities for cost savings/ Xác định được những cơ
hội tiết kiệm chi phí
Contribution to greenhouse gas emission reductions/ Góp phần giảm
thiểu khí thải nhà kính
Using potential government subsidies and tax incentives/ Sử dụng các
khoản trợ cấp tiềm năng của chính phủ và ưu đãi thuế
It enhances communication of the environmental benefits to customers/
Đẩy mạnh thông điệp tích cực về lợi ích môi trường tới khách hàng
shows commitment of the company to environmental sustainability / Thể
hiện cam kết của công ty về sự phát triển bền vững của môi trường.
Gives competitive advantage & a positive Corporate Image/ Mang lại lợi thế cạnh tranh và hình ảnh tích cực
EnMS certification promotes consistency, transparency and credibility in
organization’s assertions. / Giấy chứng nhận EnMS thúc đẩy sự nhất
quán, minh bạch và độ tin cậy của 1 tổ chức.
Benefits of EnMS certification/ Những lợi ích của Giấy Chứng
Nhận EnMS
TÜV SÜD
TÜV SÜD PSB Certification Process / Quy trình giấy
chứng nhận TÜV SÜD PSB
3 April 2014
Application/ Nộp hồ sơ
Documentation
Assessment/ Đánh giá tài liệu
Stage-1
Assessment
Giai đoạn- Đánh giá lần 1
Stage-2
Assessment/
Giai đoạn- Đánh giá lần 2
Award
of
Certificate
(valid for
3 yrs)/ Trao giấy
chứng nhận ( có
giá trị 3 năm)
Continuous
Assessment/ tiếp tục đánh giá
Renewal
Assessment/ Tái đánh giá
TÜV SÜD
TÜV SÜD’s Energy Credentials in brief
2000+ Audits/ Đánh
giá
15+ Yrs. of
experience/ Số năm kinh
nghiệm
60+ Industrial
Experts/ Các chuyên gia
nghành công nghiệp
25+ Sectors/ Các lĩnh
vực
TÜV SÜD’s Energy Credentials in brief
Năng lưc dịch vụ Chứng Nhận Năng Lượng Của TÜV SÜD
TÜV SÜD
TÜV SÜD certified clients for MS/ Những khách hàng TÜV SÜD
đã chứng nhận Hệ thống quản lý
03/04/2014 Slide 36
TÜV SÜD PSB Singapore Slide 37 MS 13-05-07
TÜV SÜD
www.tuv-sud-psb.sg
Thank you for your attention Cám ơn các bạn đã lắng nghe!
Praveen Tekchandani Product Manager Auditing Centre
TÜV SÜD PSB Pte Ltd
1 Science Park Drive, Singapore 118221
Tel.: +65 9366 8611
Fax: +65 6872 0531
Email: [email protected]