Introduction to Variable Frequency Drives › wp-content › uploads › ...• Variable Frequency...
Transcript of Introduction to Variable Frequency Drives › wp-content › uploads › ...• Variable Frequency...
-
ReynoldsOnline.com
Introduction to Variable Frequency DrivesLouisiana User Group August 2018
Our presentation will begin at 12:00 pm CDT
-
Upcoming Events
Users Group
Sept 12th – User GroupHazardous Location Products
Oct 19th – User GroupStudio 5000 and Process Control Update
Dec 12th – User GroupBest in Show III: AF2018 Review
-
Automation Fair - November
-
Today’s Topic:
Introduction toVariable Frequency Drives (VFDs)
Guest Presenter:Rob McLinAutomation SpecialistThe Reynolds Company
-
What is a VFD?
• Variable Frequency Drive (VFD)• A VFD can be used to control both the speed and
torque of a standard induction AC electric motor. • It varies both the frequency and amps of the AC
waveform being delivered to the motor saving money in electricity.
• Basic components of a VFD: • Input section, draws AC electric power from the utility,
Rectifier section, converts the AC into DC power. • Inverter section, converts DC back into a controllable AC
waveform.
-
Purpose of a VFD
• Control the speed and/or the torque of a motor• VFDs help to limit demand and electrical
consumption of motors by reducing the amount of energy they consume.
• Standard motors are constant speed and when they are energized they run at a 100% no matter the load.
• Soft Start• Only use energy you need
-
Schematic of a VFD
-
How Does A Variable Frequency Drive Work ?
• AC is rectified to a constant value of DC• The inverter IGBTs are switched creating an AC voltage and current
waveform that an AC motor can use.• The technique gives us control of the frequency which can be varied.
Note: Output current is greater than input current.
-
VFD Waveform
-
Potential Problems with a VFD
• Improper Circuit Design• Harmonic Distortion• Safety • 3 phase generation• Microcontroller programming
-
Why Use Variable Frequency Drives In Lieu of Other Variable Speed Devices ?
• Energy Savings• Running Efficiency• Reduced Demand Charge• Reduced Power Factor Charges
• Improved Process Control• Integration of control into a process• Reduced Water Hammer Effects• Reduced Pump Cavitation Problems
• High speed interface/response to PLCs and Networks• Over speed Capability• Lower system Maintenance• Easily Bypassed• Multi-motor Control
-
Load Types
Normal Duty DriveOverload – 115% for one minute
• Centrifugal pumps• Fans• Centrifugal compressors
Heavy Duty DriveOverload – 150% for one minute
• Reciprocating pumps• Gear pumps• Mixers• Extruders• Conveyors
Centrifugal Loads Constant Torque Loads
-
Reflected Wave
-
Reflected Wave Background
• Voltage doubling effect due to pulse reflections can occur at cable lengths greater than 30-50 ft, with typical IGBT rise times of 100-300 ns
-
Reflected Wave Background
-
www.reynoldsonline.com
Introduction to Variable Frequency DrivesLouisiana User Group �August 2018Upcoming EventsAutomation Fair - NovemberSlide Number 4What is a VFD?Purpose of a VFDSchematic of a VFDHow Does A Variable Frequency Drive Work ?VFD WaveformPotential Problems with a VFDWhy Use Variable Frequency Drives �In Lieu of Other Variable Speed Devices ?Load TypesReflected WaveReflected Wave BackgroundReflected Wave BackgroundSlide Number 35