INTRODUCTION TO LABS OF ELECTRICAL ENGINEERING

DEPARTMENT, UOH

Engr. Atta Ullah

EE Department LABS

• Electric Circuit and Digital Logic Lab • Electronics and Digital logic Lab • Electric Circuit Lab • Communication Lab • Control Lab • Machine Lab • Computer Lab

Electric Circuit and Digital Logic Lab

List of Equipment Name Model No Quantity

Digital Oscilloscope Peak Tech 1215 10

Function Generators Peak Tech 4030 10

DC Dual Power Supply 6010D 10

Digital Multimeters Peak Tech 3315 10

3 Phase Xtra low voltage Transformer 52129 05

Experiment Transformer 725223G 12

Analogue Multimeters 531-120 10

Proto Board Digital Lab IDL800 03

Work Benches Power Fitted 10

Electronics and Digital Logic Lab

List of Equipment

Name Model No Quantity

Digital Oscilloscope Peak Tech 1215 07

Oscilloscope Instek GOS6103 01

Oscilloscope HAMEG HM507 02

Oscilloscope HAMEG HM303-6 02

Function Generator Peak Tech 1016 10

Dual Power Supply Instek GPC3030DQ 08

Digital Multimeters Peak Tech 3315 08

Electric Circuit Lab

List of Equipment

Name Model No Quantity

Apple computers+keyboards+mice IMAC 06

Oscilloscopes PINTEK PS355 10

Function Generator Peak Tech 1016 10

Dual Power Supply Instek GPC3030DQ 08

Digital Multimeters Peak Tech 3315 08

Communication Lab

List of Equipment

Name Model No Quantity

Bench AC Power Supply, AUTOVOL G500VA 06 8086 Microprocessor Training Kit -Flight-86

06

Flight Multi Application board 06

Spectrum Analyzer GSP-810 01

Peak Tech Function Generator 1016 10

Peak Tech Digital Oscilloscope 1170 10

LABVOLT Analog Comm. Boards 91018-20 10

LABVOLT Digital Comm. 1 Boards 91022-20 10

LABVOLT Base for boards 07

Control Lab

List of Equipment

Name Model No Quantity

Apple Computers IMAC 11

Simulated control system module 73409 10

Transfer element module 734095 10

Test Function Generator module 73440 10

Measurement Indicator module 7274 09

AC/DC Stabilizer module 72688 10

DC Generator with Tacho Generator mod 73444 10

Power Amplifier module 73413 11

PID Controller module 734061 09

DC Power Supply +-15V module 72686 04

List of Equipment

Name Model NO Quantity

Sensor Cassy 2 module 524013 11 Function Module module 72771 9 Torque Synchro Module 73446 17

Servo Set Point Potentiometer Module 73410 9 Differential Pressure Transducer Module 7381 1 Liquid Controller System Module 734762 1

Temperature Control system Module 73412 1

Motor Generator Set Module 73411 1 On Load Switch Module 73439 1

Machine Lab

List of Equipment Name Model No Quantity

Transformer 726080 1 Multi Function Meter 727230 2 Field Regulator Motor 73265 2 Contact unit 73255 4 Tacho Generator 73259 3 Blocking Gear 05733 6 Three Phase transformer 73390 3 Single Phase transformer 73397 2 Resistive load 73310 2 Starter 73264 1 Switch three phase pole 73142 1 AC power Supply 2465 2

List of Equipment Name Model No Quantity

Motor Protection Switch 732-83 6 Three pole ON/OFF Switch 731-42 10 Multi Fuction Measurement Instrument 727-230 18 Sychronizing Indicator 731-62 8 Double Frequency Meter 727-27 4 Synchronoscope 727-28 5 Field Regulator Generator 732-66 5 Field Regulator Motor 732-65 8

Three Phase Transformer 733-90 6 Single Phase Transformer 733-97 5 Inductor Load 732-42 8 Resistive Load 733-10 7

Digital Oscilloscope Peak Tech 100MHz

Specification

100 MHz bandwidth 500 MSa/s sampling rate per each channel 16 logic input channels Max. 2 Mio. points record length for each channel Dual channels + external trigger + logic analyzer Support USB 2.0 data transmission, display by real-time Advanced trigger functions: edge, bus, pattern, sequential queue data, distributed queue data and data width trigger Auto scale-function, supports automatic setting of waveform- and data detecting Safety: EN 61010-1 : 2001; CAT II

Function Generator

Specification High frequency accuracy: up to 10-5 High frequency resolution: 40 mHz High waveform accuracy: 16 types of waveforms can be output Independent output for two channels Frequency- and amplitude sweeping Frequency, period, amplitude virtual - or peak-peak value selectable USB interface Crystal oscillator reference, high frequency and resolution Integrated frequency counter up to 100 MHz and 7 W power amplifier Safety: EN 61010-1; CAT II

Digital Oscilloscope Peak Tech 250MHz

Specification 250 MHz bandwidth 1 GSa/s sampling rate per each channel Logic analyzer with 16 input channels 20 automatic measurement functions FFT measurement function Max. 2 Mio. points record length for each channel Dual channels + external trigger + logic analyzer Support USB 2.0 data transmission, display by real-time Advanced trigger functions: edge, bus, pattern, sequential queue data, distributed queue data and data width trigger Auto scale-function, supports automatic setting of waveform and data detecting Safety: EN 61010-1 : 2001; CAT II

IDL 800 Digital Lab

Specification

1. Solder less breadboard: AD-200 Interconnected nickel plated contact socket with a total of 1896 tiepoints fits all components with DP size and solid wire in diameter of AWG #22-30 (0.3 - 0.8 mm)

2. DC power supply Variable DC power: Positive output voltage: 0 to +15V. Negative output voltage: 0 to -15V. Maximum output current: 300 mA. Line regulation: < 0.05%/V (Ta=25°C) Load regulation: < 30 mV (Ta=25°C) Fixed power supply: Positive output voltage: 5V ±0.25V. Maximum output current: 1 Amp. Line regulation: < 50 mV. Load regulation: < 100 mV. Negative output voltage: -5V ±0.25V. Maximum output current: 100 mA Line regulation: < 25 mV. Load regulation: < 30 mV. All DC power supplies with short circuit protection.

Specification

Specification 3. Function generator: Frequency ranges: 1 Hz ~ 10 Hz 10 Hz ~ 100 Hz 100 Hz ~1K Hz 1K Hz ~ 10 K Hz 10K Hz ~ 100K Hz Sine wave output: 0 to 8 Vpp variable. Triangle wave output: 0 to 6 Vpp variable Square wave output: 0 to 8 Vpp variable.

4. Digital voltmeter: 3 1/2 digits LED display. 4 ranges: 0 -199.9 V full scale. 0 -19.99 V full scale. 0 -1.999 V full scale. 0 - 199.9 mV full scale. Input impedance: 10 MΩ for any range.

Specification 5. Two digits of 7 segment LED display: Common cathode operation. 6. Four point tip / banana socket / BNC socket exchange adapters.

7. Eight buffered LED displays:

8. Eight data switches:

9. Two function switches:

10. Two pulse switches:

Spectrum analyzer

Specification

Frequency Range: 150kHz ~1GHz Fully Digital Phase Locked Loop Technique Design High Frequency Stability:±10ppm RBW : 3K, 30k, 220k, 4MHz High Input Protection Level : +30dBm,±25VDC Reference Level Range : -30dBm~ +20dBm Two Markers for Absolute and Relative Measurement Support standard RS-232C Interface to connect with PC Options: Tracking Generator, Power Meter, Remote Control Software

Analogue Communication

Specification

Amplitude Modulation (AM) Transmitter and Receiver Single-Sideband (SSB) Transmitter and Receiver Frequency Modulator (FM) Phase Modulator (PM) Quadrature Detector (FM demodulation) Phase-Locked Loop (PLL) PLL FM Detector

Digital Communication

Specification

Pulse-Amplitude Modulation PAM Time-Domain Multiplexing Pulse-Time Modulation (PWM and PPM) Pulse-Code Modulation and Time-Division Multiplexing of PCM Signals Delta Modulation Channel Effects

8086 Microprocessor Training Kit -Flight-86

Specification Devices : 8086 (INTEL) Operating Frequency : 6.144MHz crystal 32KB-SRAM for user Data 16KB-EPROM (software monitor program) 2x16 CHAR LCD display Serial interfacing using 8251 48 Programmable I/O Pins for ( 2 x 8255) Three 16-bit programmable timer (8253/8254) 50-Pin FRC connector for Bus Extension 20-Pin FRC connector Add-on Interface from 8255 9-pin DB connector for UART (RS232) interface Built-in assembler and dis-assembler 101-PC Type keyboard to enter user address/data commands Software Monitor for loading and executing programs with break point facility

THE END