Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest...
Transcript of Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest...
![Page 1: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/1.jpg)
Introduction to LiDAR
Technology and Applications in
Forest Management
Presented by Rory Tooke, Douglas Bolton and Nicholas Coops
Integrated Remote Sensing Studio
Faculty of Forestry
University of British Columbia. Canada
I+R + S+S University of British Columbia
![Page 2: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/2.jpg)
I+R + S+S What is LiDAR?
• LiDAR = Light Detection And Ranging
• Active form of remote sensing
• Measures the distance to target surfaces using narrow beams of near-infrared light (e.g.1064 nm).
• Primarily operated on airborne platforms for forestry applications – However spaceborne (GLAS) and field based LiDAR instruments
have also been developed.
1
![Page 3: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/3.jpg)
I+R + S+S LiDAR is Distance Measurement
R = Range or distance
c = Speed of light (299 792 km / sec)
tp = Time the pulse is emitted from the sensor
t = Time the pulse arrives back at the sensor
Divided by 2 to compensate for the round-trip distance
2
![Page 4: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/4.jpg)
I+R + S+S
LIDAR systems incorporate three technologies:
(i) laser ranging for accurate distance measurement,
(ii) satellite positioning using the Global Positioning System (GPS) to determine the geographic position and the height of the sensor, and
(iii) aircraft attitude measurement using an inertial measurement unit (IMU) to record the precise orientation of the sensor.
LIDAR Requires Three Enabling
Technologies
![Page 5: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/5.jpg)
I+R + S+S LIDAR from Space (Theoretical)
Images and movies from NASA and used with permission
![Page 6: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/6.jpg)
I+R + S+S Point Registration
y
x
z
roll
yaw
pitch
Sensor / IMU
reference frame
GPS
reference
frame
• The coordinates (x, y, z) of target objects
are determined by:
1. Differential GPS (DGPS)
- Determine precise location
of the LiDAR instrument
2. Inertial Measurement Unit (IMU)
-Determine the orientation of
the LiDAR instrument
3. LiDAR pulse orientation
4. Range to target object
-By recording the time
until pulse return
y
x
z
5
![Page 7: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/7.jpg)
I+R + S+S
LiDAR Echo
Ele
va
tio
n
Return Strength
[ Slide courtesy of Darren T. Janzen
Bluewater Business Solutions
A LiDAR Pulse
6
A waveform describes the entire return intensity as a function of time for each pulse
![Page 8: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/8.jpg)
I+R + S+S
LiDAR Echo
Ele
va
tio
n
Return Strength
[ Slide courtesy of Darren T. Janzen
Bluewater Business Solutions
A LiDAR Pulse
7
A waveform describes the entire return intensity as a function of time for each pulse
![Page 9: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/9.jpg)
I+R + S+S Storage of the Return Signal
• The returned energy is stored as either:
– Discrete points
or
– Waveform data
8
![Page 10: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/10.jpg)
I+R + S+S
Discrete Return Data
• The returned pulse is classified into one or more discrete returns
– Returns are recorded when the return energy exceeds the systems predefined threshold
– Early LiDAR systems were designed to record only the distance to the first target
– Later systems recorded multiple returns
– Last returns are particularly important for detecting the ground surface
9
![Page 11: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/11.jpg)
I+R + S+S
Discrete Return Data
• Cross-section of discrete return data
10
![Page 12: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/12.jpg)
I+R + S+S
Waveform Data
11
• Waveform data is less common than discrete return data
– As technology advances, it is becoming easier to record the full waveform
• Much larger volume of data
• Methods of processing waveform data are not as advanced
![Page 13: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/13.jpg)
I+R + S+S
• Advantages of LiDAR technology:
– Assessment of vertical structure of forests at high spatial resolutions
– Accurate estimates of surface height
– Can operate independently of sunlight
• Growing interest in LiDAR in past two decades:
– In the beginning, primary interest was the development of digital elevation
models (DEM) • Looking past the vegetation
– In the past decade, the potential for LiDAR in forestry applications has been realized • Measure tree heights to sub-metre levels of accuracy • Estimate forest attributes such as stem volume and basal area
LiDAR Technology
12
![Page 14: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/14.jpg)
I+R + S+S Different Types of LiDAR instruments
• Profiling LiDAR
• Small-footprint LiDAR
• Large-footprint LiDAR
• Ground based LiDAR
13
![Page 15: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/15.jpg)
I+R + S+S Profiling LiDAR
• Early airborne LiDAR instruments
• Measure height information along single transects with a fixed nadir view angle
• Advantages: – Relatively inexpensive
technology – Great sampling tool
• Limitation:
– Lack of spatial detail
14
![Page 16: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/16.jpg)
I+R + S+S LiDAR Scanning Pattern
• More advanced scanning
systems were later
developed (~1990s
onwards).
• Rotating mirror used to
direct pulses perpendicular
to flight direction
• Both small- and large-
footprint LiDAR use this
approach
15
![Page 17: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/17.jpg)
I+R + S+S Small-footprint LiDAR
• Beam diameters at intercepting surface < 1 m
• Typically record high sampling densities (>1 / m2)
• Accuracy ~15 cm vertically and 40 cm horizontally
• Operated on fixed wing or helicopter platforms
• Commercially available • Sensors now emit up to 260 000 pulses / sec – 3 years ago this was closer to 25 000 pulses / sec
• Increase from first / last return combinations to 5 returns per pulse
– Ability to separate returns by smaller distances (e.g. 2 m intervals) – Option to record full waveform is becoming more common
16
![Page 18: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/18.jpg)
I+R + S+S Large-footprint LiDAR
• These instruments use larger beam diameters at intercepting
surface (generally 5 to 25 m)
• Signal is averaged across the footprint
• Record the entire returned signal as a function of time
(waveform)
• Currently only experimental (e.g. SLICER and LVIS)
17
![Page 19: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/19.jpg)
I+R + S+S Ground based LiDAR
18 Figures provided by Martin van Leeuwen of the University of British Columbia
• Scanner is placed below the forest canopy
• Algorithms are deployed to detect individual tree stems
• Stems can be occluded by other stems
• Current research aims to make ground based LiDAR an operational
inventory tool
![Page 20: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/20.jpg)
I+R + S+S
• How do we derive meaningful measurements from a
LiDAR point cloud?
Working with Discrete Return LiDAR data
33 m 36 m
34 m 36 m
41 m 35 m
0
20
40
Height (m) Stem Volume (m3)
0
2.5
5
19 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 21: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/21.jpg)
I+R + S+S TERRAIN GENERATION
• LIDAR usually has high spatial sampling (0.1 – 4 m).
• Accuracy of 3-D location very good (<20 cm).
• Post-processing is done to ensure
– Recommend 2 GPS ground receivers with known positions making
absolute georeferencing possible
– Filtering of data to ascertain ground versus non-ground hits.
• Typical Accuracies: 15 cm in elevation and horizontal position
• Spot spacing much denser for slower aircraft
• More reliable/accurate DTM through denser spot spacing – more data collected
• Highest accuracy heights at nadir and decrease as swath angle increases
![Page 22: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/22.jpg)
I+R + S+S
Step 1: Extract probable
ground returns
- Ground points are often
classified by LiDAR vendor
Step 2: Create surface
from ground returns
Creating A Digital Elevation Model (DEM)
21 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 23: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/23.jpg)
I+R + S+S
22
Creating A Digital Elevation Model (DEM)
• The density of
ground points
depends on the
vegetation
structural class
• Fewer pulses will
reach the surface
under dense
canopies
• Methods of
interpolation are
needed where
ground return
densities are low Analysis performed at Pacific Rim National Park,
Vancouver Island
![Page 24: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/24.jpg)
I+R + S+S Interpolation Methods
• Interpolation is the estimation of values at unsampled locations.
• Algorithms fit a continuous surface through a set of measured points (e.g. LiDAR ground returns)
• Algorithms differ in their ease of use, mathematical complexity, and computational expense.
Inverse Distance Weighted (IDW)
Spline
Natural Neighbor
Measured Point
Fitted Surface
Sources: Johnston et al. 2001;
Maune et al. 2001
23
![Page 25: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/25.jpg)
I+R + S+S Creating A Digital Elevation Model (DEM)
24
![Page 26: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/26.jpg)
I+R + S+S
• Validating DEM
– Difficult task due to high level of accuracy
– Differential GPS is affected by vegetation cover (Naesset and Jonmeister, 2002).
– DEM accuracy may vary spatially across the landscape due to vegetation cover and ground slope
– Accuracy is generally within 1 m
Creating A Digital Elevation Model (DEM)
25
![Page 27: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/27.jpg)
I+R + S+S Digital Elevation Model (DEM) DEM of Alex Fraser Research Forest)
![Page 28: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/28.jpg)
I+R + S+S Digital Elevation Model (DEM)
Current uses in operational
planning:
• Contour lines
– Road planning
– Block boundaries
– Stream modeling
• Operational slope classes
– < 35% slope: Conventional
ground skidding
– 35-50% slope: Requires
specialized equipment
– > 50% slope: Consider cable
yarding
Uses provided by:
Don Skea, AFRF
![Page 29: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/29.jpg)
I+R + S+S
Visualization for
Malcolm Knapp Research
Forest
Digital Surface Model (DSM)
![Page 30: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/30.jpg)
I+R + S+S
Lidar visualizations produced with FUSION/LDA software – USDA Forest Service
Visualization for
Malcolm Knapp Research
Forest
Digital Surface Model (DSM)
![Page 31: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/31.jpg)
I+R + S+S
Point
elevation
Derive Heights in Relation to the Surface
30 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 32: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/32.jpg)
I+R + S+S
Point
elevation
Surface
elevation
Derive Heights in Relation to the Surface
31 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 33: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/33.jpg)
I+R + S+S
0
20
40
Height (m)
Point
elevation
Surface
elevation
Point
height above
surface
Derive Heights in Relation to the Surface
32 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 34: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/34.jpg)
I+R + S+S
[ Slide courtesy of Darren T. Janzen
Bluewater Business Solutions
• Two scales of analysis are commonly undertaken
– Tree scale
• Individual trees located in the LiDAR data and a range of tree attributes
derived (e.g. Maximum tree height, crown area, basal area….)
– Plot scale
• Attributes are estimated over a defined area (square, rectangular or
circular). For example, maximum plot height, basal area, height percentiles
![Page 35: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/35.jpg)
I+R + S+S
0
20
40
Height (m)
Tree Level Analysis
33.0 m 35.9 m
34.4 m 35.6 m
40.7 m 34.8 m
Step 1: Create Digital
Surface Model (DSM)
Step 2: Deploy
algorithms to identify
peaks in DSM
Difficult in dense canopies
34 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 36: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/36.jpg)
I+R + S+S Tree scale estimation
30
m
0
Tree Level Analysis
![Page 37: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/37.jpg)
I+R + S+S
Identification of individual trees using a Digital Surface Model
Tree Level Analysis
36
DSM DSM with trees identified
![Page 38: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/38.jpg)
I+R + S+S
• High levels of accuracy with differences generally < 1 m
• Some argue LiDAR heights are more accurate than field measurements of tree height
• The derivation of tree heights will be affected by:
– Sampling density
• High density improves changes of hitting tree top
– Tree dimensions • A smaller crown will have fewer returns
– Occlusion • Adjacent trees
Tree Level Analysis – Maximum Tree Height
37 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 39: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/39.jpg)
I+R + S+S
Modified based on Zimble et al. 2003
Missed tree
(no ‘peak’)
Missed good
height
Missed good
height
Side Height
Good Height
Incorrect Height
Interpolated Surface
Tree Level Analysis – Maximum Tree Height
38
![Page 40: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/40.jpg)
I+R + S+S
Plot Level Analysis
LiDAR Point Cloud for Alex Fraser Research Forest
39 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 41: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/41.jpg)
I+R + S+S
Plot Level Analysis
• Summarize LiDAR data on a grid
LiDAR Point Cloud for Alex Fraser Research Forest
40 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 42: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/42.jpg)
I+R + S+S
Plot Level Analysis
• Summarize LiDAR data on a grid
• Use summary metrics to estimate forest attributes for each grid cell
LiDAR Point Cloud for Alex Fraser Research Forest
41 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 43: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/43.jpg)
I+R + S+S
Plot Level Analysis
• Summarize LiDAR data on a grid
• Use summary metrics to estimate forest attributes for each grid cell
LiDAR Point Cloud for Alex Fraser Research Forest
42 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
• Must first develop relationships between LiDAR metrics and forest attributes
![Page 44: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/44.jpg)
I+R + S+S
Plot Level Analysis
• Summarize LiDAR data on a grid
• Use summary metrics to estimate forest attributes for each grid cell
LiDAR Point Cloud for Alex Fraser Research Forest
43 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
• Must first develop relationships between LiDAR metrics and forest attributes
![Page 45: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/45.jpg)
I+R + S+S
Plot Level Analysis
• Extract LiDAR data associated with each plot
LiDAR Point Cloud for Alex Fraser Research Forest
44 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 46: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/46.jpg)
I+R + S+S
Plot Level Analysis
• Extract LiDAR data associated with each plot
• Summarize the LiDAR data within each plot
LiDAR Point Cloud for Alex Fraser Research Forest
45 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 47: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/47.jpg)
I+R + S+S
Plot Level Analysis
• Extract LiDAR data associated with each plot
• Summarize the LiDAR data within each plot
LiDAR Point Cloud for Alex Fraser Research Forest
46 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
• Develop relationships between the LiDAR metrics and the plot level data
![Page 48: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/48.jpg)
I+R + S+S
Site 1 –
High Volume Example
Site 2 -
Low Volume Example
Plot Level Analysis
LiDAR Point Cloud for Alex Fraser Research Forest
47 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 49: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/49.jpg)
I+R + S+S
Plot Level Analysis
• Use first returns to calculate LiDAR metrics
• Forest attributes calculated with first returns found to be more
robust than using all returns (Bater et. al 2011)
0
5
10
15
20
25
30
35
40
High Volume Site Low Volume Site
Heig
ht
(m)
First returns plotted in two dimensions
48 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 50: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/50.jpg)
I+R + S+S
21% 0.1%
Plot Level Analysis
Calculate
Cover Metrics
Cover
30 – 40 m
0
5
10
15
20
25
30
35
40
High Volume Site Low Volume Site
Heig
ht (m
)
49 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 51: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/51.jpg)
I+R + S+S
Plot Level Analysis
0
5
10
15
20
25
30
35
40
High Volume Site Low Volume Site
Heig
ht (m
)
58% 5%
Calculate
Cover Metrics
Cover
20 – 30 m
50 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 52: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/52.jpg)
I+R + S+S
Plot Level Analysis
0
5
10
15
20
25
30
35
40
High Volume Site Low Volume Site
Heig
ht (m
)
5% 8%
Calculate
Cover Metrics
Cover
10 – 20 m
51 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 53: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/53.jpg)
I+R + S+S
0
5
10
15
20
25
30
35
40
High Volume Site Low Volume Site
Heig
ht (m
)
Plot Level Analysis
86% 16%
Calculate
Cover Metrics
Cover
Above 2 m
52 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 54: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/54.jpg)
I+R + S+S
0
5
10
15
20
25
30
35
40
High Volume Site Low Volume Site
Heig
ht (m
)
27 m 15.6 m
Calculate
Height Metrics
Mean
Height
Plot Level Analysis
53 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 55: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/55.jpg)
I+R + S+S
0
5
10
15
20
25
30
35
40
High Volume Site Low Volume Site
Heig
ht (m
)
21.7 m 2.8 m
Calculate
Height Metrics
10th
Percentile
Plot Level Analysis
54 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 56: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/56.jpg)
I+R + S+S
0
5
10
15
20
25
30
35
40
High Volume Site Low Volume Site
Heig
ht (m
)
25.1 m 8.2 m
Calculate
Height Metrics
20th
Percentile
Plot Level Analysis
55 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 57: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/57.jpg)
I+R + S+S
0
5
10
15
20
25
30
35
40
High Volume Site Low Volume Site
Heig
ht (m
)
26.5 m 12.5 m
Calculate
Height Metrics
30th
Percentile
Plot Level Analysis
56 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 58: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/58.jpg)
I+R + S+S
0
5
10
15
20
25
30
35
40
High Volume Site Low Volume Site
Heig
ht (m
)
27.4 m 15.6 m
Calculate
Height Metrics
40th
Percentile
Plot Level Analysis
57 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 59: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/59.jpg)
I+R + S+S
0
5
10
15
20
25
30
35
40
High Volume Site Low Volume Site
Heig
ht (m
)
28.2 m 16.5 m
Calculate
Height Metrics
50th
Percentile
Plot Level Analysis
58 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 60: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/60.jpg)
I+R + S+S
0
5
10
15
20
25
30
35
40
High Volume Site Low Volume Site
Heig
ht (m
)
28.8 m 17.5 m
Calculate
Height Metrics
60th
Percentile
Plot Level Analysis
59 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 61: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/61.jpg)
I+R + S+S
0
5
10
15
20
25
30
35
40
High Volume Site Low Volume Site
Heig
ht (m
)
30 m 20.1 m
Calculate
Height Metrics
70th
Percentile
Plot Level Analysis
60 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 62: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/62.jpg)
I+R + S+S
0
5
10
15
20
25
30
35
40
High Volume Site Low Volume Site
Heig
ht (m
)
30.3 m 23.2 m
Calculate
Height Metrics
80th
Percentile
Plot Level Analysis
61 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 63: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/63.jpg)
I+R + S+S
0
5
10
15
20
25
30
35
40
High Volume Site Low Volume Site
Heig
ht (m
)
31.3 m 25.7 m
Calculate
Height Metrics
90th
Percentile
Plot Level Analysis
62 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 64: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/64.jpg)
I+R + S+S
0
5
10
15
20
25
30
35
40
High Volume Site Low Volume Site
Heig
ht (m
)
34.8 m 30 m
Calculate
Height Metrics
99th
Percentile
Plot Level Analysis
63 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 65: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/65.jpg)
I+R + S+S
0
5
10
15
20
25
30
35
40
High Volume Site Low Volume Site
Heig
ht (m
)
5.2 m 7.8 m
Standard
Deviation
Plot Level Analysis
64 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 66: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/66.jpg)
I+R + S+S
0
5
10
15
20
25
30
35
40
High Volume Site Low Volume Site
Heig
ht (m
)
0.19 m 0.50 m
Coefficient of
Variation
Measure of the
structural
diversity
Plot Level Analysis
65 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 67: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/67.jpg)
I+R + S+S
Plot Level Analysis
• Once metrics are calculated at the plot level:
– Investigate the relationships between metrics and measured
forest attributes • Mean tree height, dominant tree height, stem volume, basal area
– Develop statistical models to predict forest attributes using several LiDAR metrics
• Usually a combination of a height and cover metric
– Statistical models are applied to gridded LiDAR metrics to predict forest attributes across the study area
66
![Page 68: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/68.jpg)
I+R + S+S
Deriving Forest Attributes
LiDAR point
cloud
Mean
elevation Cover
above 2m Coefficient
of variation
Stem volume
estimation
0
20
40
Height (m)
0
2.5
5
Stem Volume (m3)
0 m
35 m
0 %
100 %
0 m
1.5 m
Step 1: Calculate
gridded metrics
Step 2: Apply
statistical model
67
LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 69: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/69.jpg)
68/30
Mean Tree Height
0 5 10 15 20 25 30
Predicted (m)
0
5
10
15
20
25
30
Observ
ed (
m)
r2 = 0.89
se = 1.50
f = 183.76
p = 0.0000
y = 3.91 + 0.61*x
Maximum Tree Height
5 10 15 20 25 30 35 40 45 50
Predicted (m)
5
10
15
20
25
30
35
40
45
50
Observ
ed (
m)
r2 = 0.81
se = 3.81
f = 93.03
p = 0.0000
y = 0.38+0.96*x
Standard Deviation of Tree Heights
0 2 4 6 8 10 12 14 16
Predicted (m)
0
2
4
6
8
10
12
14
16
Observ
ed (
m)
r2 = 0.90
se = 0.86
f = 200.78
p = 0.0000
y = 0.1845 + 1.27*x
Mean Diameter at Breast Height (DBH)
0 5 10 15 20 25 30
Mean Lidar Height (m)
10
15
20
25
30
35
40
45
50
55
60
Observ
ed D
BH
(cm
)
r2 = 0.31
se = 7.85
f = 11.03
p = 0.0028
y = 15.76 + 0.75*x
How do we relate lidar to ground data? Mean tree height Maximum tree height
Variation of tree height Mean diameter (dbh)
• GPS ground plot location
• Make ground measures
• Statistically relate ground measures to lidar metrics
• Can apply these relationships across all lidar grid cells (25 x 25m)
• Metrics not limited to height
• Inventory: Generalize by polygon (ht in m):
![Page 70: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/70.jpg)
I+R + S+S
69/30
Example Equation and Results
Ŷ – TAGB
Lh0.5 – 50th percentile of laser canopy height (m).
Lh0.6 – 60th percentile of laser canopy height (m);
CC0.0 – canopy density (%) at 2 m above the ground surface.
R2 – multiple coefficient of determination.
SEE – standard error of the estimate in transformed units.
Radius (m)
Plot Size (m
2) Fitted OLS Regression Model
R
2 SEE
20 1257 Ŷ = −51.3755 + 13.0245 × Lh0.6 + 3.6330 × CC0.0 0.960 38.64
TAGB Mg/ha
![Page 71: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/71.jpg)
I+R + S+S Example of Multiple Regression Equations at the Plot Scale
Source: Næsset 2002
![Page 72: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/72.jpg)
I+R + S+S
Alberta SRD – 16 Dec 2011
A Canadian Foothills Project
Study Area
– Hinton FMA ~990,000 ha; 385,000 AVI polygons
• Clients, Partners & Collaborators
– West Fraser Mills, Hinton Wood Prods.
– AB Sustainable Resource Development
– CFS, Pacific Forestry Centre
• Dr. Mike Wulder, Dr. Gordon Frazer,
Joanne White, Geordie Hobart
– University of BC
• Dr. Nicholas Coops, Dr. Thomas Hilker, Danny Grills, Martin van Leeuwen, Chris Bater
Partners: WFM - Hinton Wood Prod.; Alberta SRD; CFS–PFC; UBC
![Page 73: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/73.jpg)
I+R + S+S
Alberta SRD – 16 Dec 2011
Existing Data Sources & Evolving Objectives
LiDAR & Ground Data
– AB SRD: Full LiDAR coverage (2004-2007) @ 0.75 to 1.1 hits/m2 & AVI data:
– HWP: Permanent Growth Sample Plot Data
Evolving Objectives
– Proof of Concept for mapping plot attributes from LiDAR-based predictions
![Page 74: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/74.jpg)
I+R + S+S Processing Point Cloud “Canopy Metrics”
• Used available USDA FS Freeware package, “FUSION/LDV“, to tile, grid & calculate 61 Canopy Metrics @ 25m X 25m resolution (i.e. for each of nearly 14 million grid cells)
![Page 75: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/75.jpg)
I+R + S+S Ground Calibration Prediction Model Development
• HWP maintains a network of systematically distributed Permanent Growth Sample Plots
– team used 788 of >3200 available plots to develop Prediction Models
– Ordinary Least Squares multiple regression and a non-parametric tool “Random Forests” (resident in “R” statistical software) used to create prediction models
– separate models developed for each of 3 “forest types”, based on AVI spp. composition
• “conifer-leading”, “mixed” & “deciduous-leading”
![Page 76: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/76.jpg)
Alberta SRD – 16 Dec 2011
Predicted Inventory Variables GIS Layers
• Mapped @ “plot-level” & @ AVI “polygon-level”
– Top Height, Mean Height, & Modal Height
– Quadratic Mean Diameter & Basal Area
– Total & Merchantable Volume
– Total Above Ground Biomass
• Also mapped all canopy metrics and several generalized plot/elevation characteristics
– e.g. terrain wetness index, plan & profile curvature, solar radiation, hill shade, slope & aspect
Total Above Ground Biomass (tonnes/ha)
![Page 77: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/77.jpg)
76/30
![Page 78: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/78.jpg)
77/30
![Page 79: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/79.jpg)
276 m3/ha
384 m3/ha
164 m3/ha
331 m3/ha
14 m3/ha
247 m3/ha
33 m3/ha
525 m3/ha
0 m3/ha
Merchantable Volume
![Page 80: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/80.jpg)
79/30
276 m3/ha
Within-block variability:
Count: 365 cells
Minimum: 102 m3/ha
Maximum: 480 m3/ha
Mean: 276 m3/ha
Std Dev: 70 m3/ha
95% CI: 276 m3/ha ± 7.18
m3/ha
Merchantable Volume
![Page 81: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/81.jpg)
I+R + S+S
Alberta SRD – 16 Dec 2011
Validation Weight-scaled volume from 272 cutblocks harvested since LiDAR acquisition
compared to predictions from LiDAR & Cover Type Adjusted Volume Tables
Information courtesy Hinton Wood Products A division of
West Fraser Mills Ltd.
Block Size
(m3 X1000)
Source of
Prediction
Predicted Volume
– Scaled Volume
Statistically
significant?
< 5
n = 138
LiDAR
CT Vol. Table
-6.7%
-23.7%
No
Yes
5 – 10
n = 76
LiDAR
CT Vol. Table
+1.8%
-17.4%
No
Yes
10 – 15
n = 25
LiDAR
CT Vol. Table
-1.2%
-22.3%
No
Yes
15 – 20
n = 15
LiDAR
CT Vol. Table
-4.4%
-23.5%
No
Yes
>20
n = 18
LiDAR
CT Vol. Table
+6.6%
-17.4%
No
No
![Page 82: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/82.jpg)
I+R + S+S
Conclusions
• Using LiDAR technology, we can:
– Directly measure tree heights
– Calculate accurate estimates of stem volume and basal area • Accurate plot data is CRITICAL to accurate estimations of forest attributes
– GPS location of plot centers
– Short time lag between field measurements and LiDAR data collection
• LiDAR technology is continuing to improve – More pulses per square meter (from 4 to 8 to 12)
• More accurate tree heights
• Easier to identify individual trees
– Methods to process LiDAR data are improving as well
81 LiDAR visualizations produced with FUSION/LDA software – USDA Forest Service
![Page 83: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/83.jpg)
I+R + S+S
Thank you
82
![Page 84: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/84.jpg)
I+R + S+S References
• Andersen, H.E., McGaughey, R.J. and Reutebuch, S.E. (2005). Estimating forest canopy fuel parameters using LiDAR data. Remote Sensing of Environment, 94, 441-449.
• Bater, C.W., Wulder, M.A., Coops, N.C., Nelson, R.F., Hilker, T., Næsset, E., In press. Stability of sample-based scanning LiDAR-derived vegetation metrics for forest monitoring. IEEE Transactions on Geoscience and Remote Sensing.
• Goodwin, N.R., Coops, N.C. and Culvenor, D.S. (2006). Assessment of forest structure with airborne LiDAR and the effects of platform altitude. Remote Sensing of Environment, 103, 140-152.
• Holmgren, J. and Persson, R. (2004). Identifying species of individual trees using airborne laser scanner. Remote Sensing of Environment, 90, 415-423.
• Hyyppä, J., Kelle, O., Lehikoinen, M. and Inkinen, M. (2001). A segmentation-based method to retrieve stem volume estimates from 3-D tree height models produced by laser scanners. IEEE Transactions on Geoscience and Remote Sensing, 35, 969-975.
• Lefsky, M., Cohen, W., Parker, G. and Harding, D. (2002). LiDAR remote sensing for ecosystem studies. BioScience, 52, 19-30.
• Lovell, J.L., Jupp, D.L.B., Culvenor, D.S. and Coops, N.C. (2003). Using airborne and ground-based ranging LiDAR to measure forest canopy structure in Australian forests. Canadian Journal of Remote Sensing, 29, 607-622.
• Magnussen, S., Boudewyn, P., 1998. Derivations of stand heights from airborne laser scanner data with canopy-based quantile estimators. Can. J. For. Res. 28, 1016–1031.
• Maltamo, M., Packalén, P., Yu, X., Eerikäinen, K., Hyyppä, J. and Pitkänen, J. (2005). Identifying and quantifying structural characteristics of heterogeneous boreal forests using laser scanner data. Forest Ecology and Management, 216, 41-50.
83
![Page 85: Introduction to LiDAR Technology and Applications … to LiDAR Technology and Applications in Forest Management Presented by Rory Tooke, Douglas Bolton and Nicholas Coops Integrated](https://reader034.fdocuments.in/reader034/viewer/2022051106/5ae0e31a7f8b9ad66b8ebf23/html5/thumbnails/85.jpg)
I+R + S+S References (cont.)
• Moffiet, T., Mengersen, K., Witte, C., King, R. and Denham, R. (2005). Airborne laser scanning: exploratory data analysis indicates potential variables for classification of individual trees or forest stands according to species. ISPRS Journal of Photogrammetry and Remote Sensing, 59, 289-309.
• Næsset, E. and Jonmeister, T. (2002). Assessing point accuracy of dGPS under forest canopy before data acquisition, in the field and after postprocessing. Scandinavian Journal of Forest Research, 17, 351-358.
• Næsset, E. (2002). Predicting forest stand characteristics with airborne scanning laser using a practical two-stage procedure and field data. Remote Sensing of Environment, 80, 88-99.
• Nelson, R., Short, A. and Valenti, M. (2004). Measuring biomass and carbon in Delaware using an airborne profiling LIDAR. Scandinavian Journal of Forest Research, 19, 500-511.
• Roberts, S.D., Dean, T.J., Evans, D.L., McCombs, J.W., Harrington, R.L. and Glass, P.A. (2005). Estimating individual tree leaf area in loblolly pine plantations using LiDAR-derived measurements of height and crown dimensions. Forest Ecology and Management, 213, 54-70.
• Sambridge, M., Braun, J. and McQueen, H. (1995). Geophysical parameterisation and interpolation of irregular data using natural neighbours. Geophysical Journal International, 122, 837-857.
• Solberg, S., Næsset, E., Hanssen, K.H. and Christiansen, E. (2006). Mapping defoliation during a severe insect attack on Scots pine using airborne laser scanning. Remote Sensing of Environment, 102, 364-376.
• Zimble, D.A., Evans, D.L., Carlson, G.C., Parker, R.C., Grado, S.C. and Gerard, P.D. (2003). Characterising vertical forest structure using small-footprint airborne LiDAR Remote Sensing of Environment, 87, 171-182.
84