Introduction to a pit-less lever scale “concrete deck”
-
Upload
lavinia-peterson -
Category
Documents
-
view
29 -
download
6
description
Transcript of Introduction to a pit-less lever scale “concrete deck”
Introduction to a pit-less lever scale “concrete deck”
• The scale to be shown is a B-Tek Side/rail Side/lever electromechanical
• Platform is 60’x11’ on a pier design foundation
• The foundation has (2) 10’approaches
• The scale utilizes a heavily reinforced concrete deck “Field installed”
• The scale has 8” clearance
• Features:• Only (2) tension load cells and a
(4) section lever system.
• Safety side rails are part of the scale’s design.
• 6” heavily reinforced concrete deck poured on top of the cross channels
• 11’ wide inside the beams no extra charge.
• Dependable lever system design and only (2) load cells minimize exposure to lightning.
Unloading levers and bridges
• Shows completed foundation and scale being unloaded
Setting the levers
• Outboard designed levers being set on the piers
• Notice the four section design with the two stands for the load cells
Scale installed
• Shows the outboard levers with the two load cell stands
• Notice the 9’ slab toward the center of the scale for the scale house
Scale installed opposite view
• Shows view of the scale from opposite the levers system
• Notice the heavy duty side rails
Top View
• Scale top view before concrete deck
• Back-up sheeting and reinforcing to be install on top of cross channels
Deck Poured
• Concrete deck installed, shows the height of the side rail
• Start of the scale house construction
Install complete
• Scale with complete 8’x8’ scale house• Scale house contains all electronics, is fully insulated, vinyl sided, has a locking
door, window for air, separate electrical for scale.