Introducing

The Comfort

Zone(75° /50% RH)

Every HVAC system is

trying to hit this target.

Hot, humid climates

High latent load.

The Challenge:

Here’s how conventional HVAC does it …

The Comfort

Zone(75° /50% RH)

AC

First, over-cool the air to the dew

point.

Then, remove the moisture.

Re-heat

Finally, reheat the air back to the Comfort Zone!

Hot, humid climates

(And while you’re at it, use plenty of energy! )

Here’s how

does it …

The Comfort

Zone(75° /50% RH)

Hot, humid climates

Desiccant

Take the moisture out first, using

innovative low-flow liquid desiccant

technology.AC

Then lightly cool to the Comfort Zone—using a fraction of

the energy.

Cool. Dry. And Frugal.

Here’s how the system works …

Regenerator

Heat Exchanger

Liquid Salt Solution

Conditioner

Hot, humid outside air is drawn into Sonoma Cool’s Conditioner.Liquid desiccant removes the moisture

while water cools the Conditioner.Dried process air is released

into the building’s cooling unit.Saturated desiccant is sent through

the Heat Exchanger to the Regenerator.Heat dries the desiccant. Air flowing through the Regenerator

carries off the excess moisture.Dried desiccant is cooled through the Heat Exchanger

and cycled back to the Conditioner.

Efficiency Matters

From PAX Streamline, Inc. www.paxstreamline.com